共查询到20条相似文献，搜索用时 375 毫秒
1.
双桥静力触探法判别上海薄夹层粘土地基液化研究 总被引：2，自引：0，他引：2
通过对11项典型工程场地进行原位取土及双桥静力触探原位测试分析,重点研究了上海地区薄层粘性土（或粘质粉土）夹层对液化判别的影响,统计分析了锥尖阻力qc、摩阻比Rf与土层粘粒含量的相关关系,提出了完全依据双桥静力触探试验的地基液化判别方法,在工程应用中取得了显著经济效益。 相似文献
2.
饱和砂土地震液化判别的可拓聚类预测方法 总被引：4，自引：0，他引：4
基于可拓学的物元模型和聚类分析原理,提出了饱和砂土地震液化判别的可拓聚类方法。选取地震烈度、震中距、砂层埋置深度、地下水位、标贯击数、平均粒径、不均匀系数和动剪应力比等8个影响因素,作为饱和砂土地震液化的评价因子,构建了经典域物元和节域物元。应用物元理论和可拓集合中的关联函数,建立预测模型,通过聚类分析得到饱和砂土地震液化的判别结果。实例研究表明,该模型能客观地反映砂土的液化规律,可拓聚类预测方法应用于饱和砂土地震液化判别是有效可行的。 相似文献
3.
为快速准确地对砂土液化情况作出预测,选取地震烈度、地下水位、覆盖厚度、标贯击数、平均粒径、地貌单元、土质及不均匀系数为主要影响因素,运用相关性分析和因子分析模型对其进行分析和属性约减,采用遗传算法（GA）对支持向量机（SVM）的参数寻优,结合Adaboost迭代算法,建立预测砂土地震液化的GA_SVM_Adaboost模型。选用唐山地震砂土液化现场勘察资料中的329组数据对模型进行训练,利用该模型对剩余68组砂土液化数据进行预测。最后,将预测结果与GA_SVM和SVM模型预测结果进行比较。结果表明,3个模型的平均预测准确率分别为100%、98.04%、89.71%,基于因子分析的GA_SVM_Adaboost模型的预测准确性优于GA_SVM模型和SVM模型,是一种解决砂土地震液化预测问题的有效方法,具有一定的应用参考价值。 相似文献
4.
5.
饱和砂土液化判别方法中问题浅析 总被引：19，自引：3，他引：16
国内外各种勘察规范中所判别砂土液化的方法很多,但其效果如何,很维得到难３,笔者利用唐山地震砂土液化资料对几种目前较为常用、有代表性的方法进行了回判分析,指出了这些方法中存在的问题,并阐述了影响液化的主要因素。 相似文献
6.
7.
以标贯试验为依据的砂土液化确定性及概率判别法 总被引：1，自引：0，他引：1
核电厂址非基岩场地的地基液化问题是核电厂选址的关键问题,亟需建立核电厂址地基液化判别方法。回顾了以标贯试验和地表峰值加速度为依据的砂土液化判别方法的演化历史,依据Idriss-Boulanger确定液化临界曲线的基本方法,提出了确定液化临界曲线的基本原则,分别依据美国液化数据库、中国抗震规范液化判别式所用的液化数据及综合两者的液化数据资料,给出了相应的液化临界曲线,验证了液化临界曲线的位置对不同的细粒含量、有效上覆压力、现场试验方法的液化数据的合理性,分析了测量或估计土层循环应力比和修正标贯击数各种因素的不确定性对液化临界曲线的敏感性,结果表明：所提的液化临界曲线不易受各种因素的影响。利用Monte Carlo模拟、加权最大似然法和加权经验概率法,给出了液化临界曲线的名义抗液化安全系数与液化概率的经验关系式及概率等值线,并对核电厂Ⅰ类、Ⅱ类和Ⅲ类抗震物项地基,给出了相应的液化临界曲线。 相似文献
8.
利用一个经过广泛验证的数值模型FSSI-CAS 2D为计算工具,采用砂土的高级本构模型Pastor-Zienkiewicz-Mark III (PZIII) 描述海床砂土的动态力学行为,定量研究松散海床地基土在波浪作用下,其内部的液化过程和特征,以加深对波致海床液化特征、性质的认识。计算结果分析表明,开发的耦合数值模型FSSI-CAS 2D能够很好地捕捉到波浪作用下欠密实海床的动力响应特征,以及海床内的累积液化过程等一些列的非线性物理现象。研究表明,波浪导致的松砂海床液化是一个渐进过程,海床表面首先液化,并逐渐向下扩展。 相似文献
9.
为探究阶地饱和砂质粉土在黄土滑坡冲击荷载作用下的力学机理,选取泾阳南塬典型黄土滑坡LD37为研究对象。通过基本性质测试获取了阶地砂质粉土的物理、水理、颗粒级配和矿物组分等指标。采用自制冲击设备进行了3种饱和度条件下的冲击试验,并对水分迁移和剪切强度变化等问题进行了分析,在此基础上探讨了冲击液化机理。结果表明:冲击荷载会使砂质粉土内部的总应力与孔隙水压力剧增,在应力波的作用下,出现多个峰值,且孔隙水压力在1 s内难以完全消散;80%与90%饱和度的砂质粉土受冲击会在深度方向上形成不同程度的液化,而70%饱和度的砂质粉土受冲击后沿深度方向并未发生液化;砂质粉土发生冲击液化时下部水分会向上部迁移,导致其上部土层含水率骤增,剪切强度骤减;冲击液化过程可划分为初始阶段、冲击挤压阶段和冲击回弹阶段。砂质粉土的冲击液化机理是一种由于快速冲压土体的不排水行为,导致其颗粒原始骨架结构破坏重组,从而引起其内部孔压快速积累的一种液化行为。 相似文献
10.
基于Logistic回归模型的砂土液化概率评价 总被引：2，自引：1，他引：1
以国内外23次地震中200组场地液化实测数据为基础,通过Logistic回归分析,建立关联修正标准贯入击数N160cs与循环应力比CSR的液化概率模型。以50 %液化概率水平为液化与非液化的临界点,建立了指数形式的抗液化应力比CRR计算式,新建概率模型预测饱和砂土液化与非液化的成功率分别为85.71 %和76.14 %,具有较高的可靠性。与已有模型比较,使用了新的数据和修正系数,消除了一些不合理的偏差,总体判别结果偏于安全。为了将确定性分析方法与概率分析方法联系起来,建立了抗液化安全系数FS与液化概率PL的关系式。算例结果表明,新建概率模型简单、实用、可靠。 相似文献
11.
为研究地震作用下饱和砂土液化判别及地震放大效应的影响因素,采用边界面塑性模型框架内开发的砂土本构模型,基于开源有限元平台OpenSees建立了一维剪切梁土柱模型。以循环应力比CSR和循环抗力比CRR为控制指标,对比了不同液化判别方法的差异,分析了地震荷载类型和砂土相对密度对液化判别和放大效应的影响。研究表明:与数值模拟结果相比,Seed简化法计算的CSR更大,判断饱和砂土场地发生液化的可能性更高;冲击型地震波较振动型地震波更容易使饱和砂土场地发生液化,砂土相对密度越小场地越容易发生液化;放大系数随埋深的减小而增大,振动型地震波引起的放大效应整体大于冲击型,埋深较大时放大系数随砂土相对密度的增大而减小。 相似文献
12.
Soil liquefaction evaluation using shear wave velocity 总被引：1，自引：0，他引：1
Kamil Kayabali 《Engineering Geology》1996,44(1-4):121-127
A reasonably good relationship between shear wave velocity (SWV) and standard penetration resistance (SPT) of granular soils in agreement with previous studies was obtained from field tests. A similar correlation between SWV and cone penetration resistance of granular soils was also obtained. Using Seed's Standard Penetration Test (SPT)-based soil liquefaction charts, new charts of soil liquefaction evaluation based on SWV data were developed for various magnitude earthquakes. 相似文献
13.
14.
Wen-Jong Chang Sheng-Huoo Ni An-Bin Huang Yan-Hong Huang Yu-Zhang Yang 《Engineering Geology》2011,(3):235
Geotechnical reconnaissance of a recurrent liquefaction site at a Quaternary alluvial deposit in southern Taiwan was conducted to establish a comprehensive case history for liquefaction on silty fine sand with high fines content. The liquefaction occurred at a silty fine sand layer with D50 = 0.09 mm and fines content greater than 35% and was triggered by a Mw = 6.4 earthquake on March 4, 2010, which induced maximum horizontal acceleration up to 0.189 g at the site. In situ subsurface characterizations, including standard penetration test, cone penetration test, and shear wave velocity measurement, were performed as well as cyclic simple shear tests on undisturbed specimens retrieved by a modified hydraulic piston sampler. Comparisons of cyclic resistance ratios (CRRs) indicate that CPT sounding with standard penetration rate could overestimate the resistance ratio and drainage conditions during penetration should be considered for high fines content soil in the liquefaction analysis. Additionally, variations of CRRs from different in situ tests indicate that correlations among in situ tests and CRR could be soil specific and precautions should be taken when using these curves on silty fine sands. 相似文献
15.
Uncompacted artificial-fill deposits on the east side of San Francisco Bay suffered severe levels of soil liquefaction during the Loma Prieta earthquake of 17 October 1989. Damaged areas included maritime-port facilities, office buildings, and shoreline transportation arteries, ranging from 65 to 85 km from the north end of the Loma Prieta rupture zone. Typical of all these sites, which represent occurrences of liquefaction-induced damage farthest from the rupture zone, are low cone penetration test and Standard Penetration Test resistances in zones of cohesionless silty and sandy hydraulic fill, and underlying soft cohesive Holocene and Pleistocene sediment that strongly amplified ground motions. Postearthquake investigations at five study sites using standard penetration tests and cone penetration tests provide a basis for evaluation of the Arias intensity-based methodology for assessment of liquefaction susceptibility. 相似文献
16.
17.
砂土液化预测的Fisher判别模型及应用 总被引：3，自引：0，他引：3
基于Fisher判别理论建立了砂土液化可能性的Fisher判别分析（FDA）模型。在分析砂土液化影响因素的基础上,选取烈度、震中距、地下水位、砂层埋深、标贯击数、平均粒径、不均匀系数、剪应力比等8个实测特征指标作为FDA模型的预测指标。利用砂土液化的实测数据作为训练样本进行训练,建立FDA模型对砂土液化进行预测,并用其他未参加训练的实测数据进行了验证。研究结果表明,FDA模型简便可行、预测精度高,是解决砂土液化预测问题的有效方法之一。 相似文献
18.
Modification of the liquefaction potential index and liquefaction susceptibility mapping for a liquefaction-prone area (Inegol,Turkey) 总被引：2，自引：0，他引：2
Although some liquefaction assessment methods were proposed to evaluate the liquefaction potential of sandy soils, the conventional method based on the standard penetration test (SPT) has been commonly used in most countries and in Turkey. However, it alone is not a sufficient tool for the evaluation of liquefaction potential. The liquefaction potential index was proposed to quantify the severity of liquefaction. Nevertheless, the liquefaction potential index and the severity categories do not answer the question: "Which areas will not liquify?" Besides, the categories do not include a "moderate" category; on the other hand, the "high" and "low" categories are included. This situation is also contrary to the nature of classification schemes. In this study, the liquefaction potential index and the liquefaction potential categories were modified by considering the existing form of the categories based on the liquefaction potential index. While the category of low was omitted, the categories of moderate and "non-liquefied" were adopted. A factor of safety of 1.2 was assumed as the lowest value for the liquefaction potential category of non-liquefied. In addition, the town of Inegol in the Marmara region became the case study for checking the performance of the liquefaction potential categories suggested in this study. 相似文献
19.
饱和砂土爆炸液化特性研究 总被引：3，自引：0，他引：3
基于有效应力动力分析法,在Byrne有效应力弹塑性模型的基础上,提出了一个能够考虑主应力轴旋转、饱和砂土含有少量气体、饱和砂土液化后的应变软化和应力重分布特性的弹塑性模型。将该模型编制成分析模块,并与通用岩土分析软件FLAC接口,进而对饱和砂土分别在单点、两点（微差）和多点（微差）爆炸地震波荷载作用下进行数值模拟分析,分别考虑了水平、微倾以及斜坡场地等3种工况,并且对爆炸地震波荷载与天然地震波荷载作用下饱和砂土的动力特性进行了对比研究。数值模拟结果表明,该模型能够很好地表现饱和砂土的爆炸液化气特性;不同动载和不同场地条件下,饱和砂土表现的动力特性以及液化行为也不尽相同。 相似文献
20.
The evaluation of the undrained cyclic resistance of sandy deposits is required to forecast the soil behaviour during an earthquake (liquefaction, cyclic mobility); due to the difficulties in obtaining undisturbed samples of most liquefiable soils, it is usually deduced from field test results such as cone penetration tests. This paper proposes a methodology to evaluate the undrained cyclic resistance from normalised cone resistance of two well-studied silica sands (Ticino and Toyoura), with different mineralogy, one mainly composed of feldspar, the other of quartz. The determination of the cyclic resistance of Ticino and Toyoura sands was achieved through undrained cyclic triaxial tests on reconstituted specimens. The tip resistance was deduced from CPTs performed in centrifuge with a miniaturised piezocone on homogeneous reconstituted models. Both the undrained cyclic and tip resistances were correlated with the state parameter ψ. Results of centrifuge and triaxial tests were combined through ψ to deduce the cyclic resistance ratio CRR directly from the normalised cone resistance. The shape of the curve relating CRR to the normalised cone resistance resulted unusual respect to all the recognised curves widespread in the geotechnical literature. The aim of the proposed correlations is to provide a useful instrument to improve the actual knowledge on liquefaction and to give a contribution based on the critical state soil mechanics framework to the development of refined correlations between the cyclic resistance of a sand and the results of cone penetration tests. 相似文献