共查询到20条相似文献，搜索用时 46 毫秒
1.
《Geodinamica Acta》2013,26(2):131-144
An extensional event affected the southwest Margin of Iberia during Late Triassic to Early Cretaceous times, giving place to the Algarve basin. This basin was subjected to tectonic instability and it became infilled with siliciclastic and carbonate sequences with abundant interspersed volcanic rocks. Normal and strike-slip faults accommodated the deformation in the Algarve basin. The presence of a single flat or listric detachment surface is inferred from the study of hanging-wall structures. The dynamic and kinematic analyses of fault systems in the Spanish exposure of the Algarve basin allow us to establish three extensional phases. 1) A Late Triassic to Hettangian NE-SW directed extension associated with the initial breaking of Pangea and the opening of the Tethys in the eastern Mediterranean. 2) NW-SE extension from the Sinemurian to the Callovian, interpreted as a result of the activity as a sinistral fault of the Azores-Gibraltar transform boundary. 3) Finally, E-W extension during the Late Jurassic and Cretaceous, related to the North Atlantic rifting process. 相似文献
2.
鄂尔多斯盆地周边断裂运动学分析与晚中生代构造应力体制转换 总被引：44，自引：3，他引：41
基于对鄂尔多斯盆地西南缘构造带、中央断裂、东缘边界带和东北部地区的断裂几何特征、运动学及其活动期次的野外观察和测量,并根据断层面上滑动矢量的叠加关系和区域构造演化历史,确定了鄂尔多斯盆地周边地带晚中生代构造主应力方向、应力体制及其转换序列,提出了4阶段构造演化模式和引张-挤压交替转换过程。早中侏罗世,盆地处于引张应力环境,引张方向为N-S至NNE-SSW向。中侏罗世晚期至晚侏罗世,构造应力场转换为挤压体制,盆地周缘遭受近W-E、NW-SE、NE-SW等多向挤压应力作用。早白垩世,盆地构造应力场转换为引张应力体制,引张应力方向为近W-E、NW-SE和NE-SW向。早白垩世晚期至晚白垩世,盆地应力体制再次发生转换,从前期的引张应力体制转换为NW-SE向挤压应力体制。晚中生代构造应力体制转换和应力场方向变化不仅记录了不同板块之间汇聚产生的远程效应,同时记录了盆地深部构造-热活动事件,并对盆地原型进行了一定的改造。 相似文献
3.
ZHANG Yueqiao Institute of Geomechanics Chinese Academy of Geology Beijing ChinaPierre Vergely Jacques-Louis Mercier URA-CNRS: Geophysique et Geodynamique Interne Universite de Parie-Su Bdtment F- Orsay-Cedex France WANG Yongmin ZHANG Yong HUANG DezhiInstitute of Geology Bureau of Geology Mineral Resouces of Anhui Province Hefei China 《《地质学报》英文版》1999,73(3):264-274
Since the mid-late Eocene, North China has been subjected to extensional stress, resulting in the formation and development of basins. The dynamic origin of this crustal extension has long been an issue of debate. This paper presents the results of kinematic analyses of faults obtained from two seperated areas in North China. In the Weihe graben situated on the southernmost margin of the Ordos block, analyses of fault kinematics were coupled with an analysis of the basin's subsidence history. Three successive extensional tectonic phases accompaning the basin's formation and development have been distinguished. The Palaeogene extension was oriented in a WNW-ESE direction; the Neogene extension in a NE-SW direction and the Pliocene-Quaternary extension in a NW-SE direction. Such changes have also been recorded by fault kinematics along the southern Tanlu fault zone. This has been demonstrated by three successive sets of fault striations indicating normal dip slip resulting from NW-SE extension, then left- 相似文献
4.
New insights on the tectonic and paleogeographic evolution of the central Atlasic domain of Tunisia 总被引：1，自引：0，他引：1
Geological and geoseismic profiles and well data gathered with field observations from the Atlasic Chain in central Tunisia highlight folded structures, tectonic events, and significant faults. These events controlled basin formation and evolution during successive Mesozoic extensional phases, followed by the tectonic inversion during the Atlasic Orogeny known on a Tethyan scale. The Cretaceous extension is well recorded through deposition, which supplied the normal faults system and influenced sediment distribution and regional subsidence. The major event is the normal slip of the principle inherited fault during the Cretaceous subsidence. The northwestern blocks, which are north of the faults of Mrhila–Trozza–Cherichira and Ballouta and west of the NS axis, correspond to continually subsiding areas of the Upper Cretaceous series. Subsequent faulting reactivated compressional structures such as strike-slips, reverse, and thrust faults during the Tertiary Orogeny which largely affected the Tunisian Atlasic domain. Geological profiles point out the evidence of the Upper Cretaceous emersion of the central Tunisia domain and lateral thickness variation of the series from Jurassic to Quaternary, unconformities, and halokinesis movement. 相似文献
5.
《International Geology Review》2012,54(9):840-849
The eastern Pontide magmatic arc extends ～600 km in an E-W direction along the Black Sea coast and was disrupted by a series of fault systems trending NE-SW, NW-SE, E-W, and N-S. These fault systems are responsible for the formation of diachronous extensional basins, rift or pull-apart, in the northern, southern, and axial zones of the eastern Pontides during the Mesozoic. Successive extensional or transtensional tectonic regimes caused the abortive Liassic rift basins and the Albian and Campanian pull-apart basins with deep-spreading troughs in the southern and axial zones. Liassic, Albian, and Campanian neptunian dikes, which indicate extensional tectonic regimes, crop out within the Paleozoic granites near Kale, Gumushane, and the Malm–Lower Cretaceous platform carbonates in Amasya and Gumushane. These neptunian dikes correspond to extensional cracks that are filled and overlain by the fossiliferous red pelagic limestones. Multidirectional Liassic neptunian dikes are consistent with the general trend of the paleofaults (NE-SW, NW-SE, and E-W), and active dextral North Anatolian fault (NAF) and sinistral Northeast Anatolian fault (NEAF) systems. The Albian neptunian dikes in Amasya formed in the synthetic oblique left-lateral normal faults of the main fault zone that runs parallel to the active North Anatolian fault zone (NAFZ). Kinematic interpretation of the Liassic and Albian neptunian dikes suggests N-S extensional stress or northward movement of the Pontides along the conjugate fracture zones parallel to the NAFZ and NEAFZ. This northward movement of the Pontides in Liassic and Albian times requires left-lateral and right-lateral slips along the conjugate NAFZ and Northeast Anatolian fault zones (NEAFZ), respectively, in contrast to the recent active tectonics that have been accommodated by N-S compressional stress. On the other hand, mutual relationships between the neptunian dikes and the associated main fault zone of Campanian age extending in an E-W direction in the Kale area, Gumushane suggest the existence of a main left-lateral transtensional wrench zone. This system might be accommodated by the counterclockwise convergence of the Turkish plate with the Afro-Arabian plate relative to the Eurasian plate, and the southward oblique subduction of Paleotethys beneath the eastern Pontide magmatic arc during the Mesozoic. 相似文献
6.
The research area concentrates in a part of the main Zagros fold and thrust belt in the Kurdistan region (Northern Iraq). From study tectono-stratigraphy we constrain the story of the basin evolution of Kurdistan during Cretaceous. However we mainly investigated the evolution of the pre-Subduction and Pre-collision periods, focusing on the relationship between tectonics and sedimentation. For this purposes we developed (1) a biostratigraphic approach using nannofossil analysis, (2) a fault tectonic analysis, and (3) a stratigraphic study. The Zagros fold belt in Kurdistan exhibits many lateral and vertical environmental and facies changes, especially during the Cretaceous times. During the Jurassic period the Kurdistan is occupied by the restricted Gotnia Basin. This basin disappeared and the Kurdistan area changed to open marine of a southwest Kermanshah Basin during the Cretaceous. During the Berriasian to Barremian the Kurdistan was covered by the carbonates of the Balambo and Sarmord formations. In the east and southeast the neritic Sarmord Formation gradationally and laterally passes to the basinal facies of the Balambo Formation. In the Aptian to Cenomanian period shallow massive reefal limestone of the Qamchuqa Formation deposited. The normal faulting that initiates during the Aptian is associated with an abrupt lateral change of the reefal Qamchuqa Formation to the Aptian-Cenomanian part of the Balambo Formation. During the Cenomanian-Early Turonian periods the graben formed in the Dokan Lake in eastern Kurdistan, where developed a deeper restricted environment (Dokan and Gulneri formations) surrounded by a shallow marine platform. During the Turonian the marine pelagic micritic cherty limestones of Kometan Formation covered northeast of Kurdistan, whereas in the Safeen, Shakrok and Harir anticlines the formation was totally, or partially, weathered during the Coniacian-Early Campanian period. The deposition during the Late Cretaceous is very heterogeneous with a gap in the Coniacian-Santonian times probably related to a non-deposition. Associated with extensive tectonics a basin developed during the Campanian with the deposition of shales, marls and marly limestones of the Shiranish Formation. The first appearance is the Kurdistan of the flysch facies of the Tanjero Formation was precisely dated of the Upper Campanian in northeastern Kurdistan. The Tanjero Formation conformably overlaying the Shiranish Formation and was deposited in the foredeep basin associated with the obduction of Tethyan ophiolites onto the Arabian Platform. The Early to Late Campanian period is a time of non-deposition in Central Kurdistan (Safeen, Shakrok and Harir anticlines). During the Late Campanian the Bekhme carbonate platform in the north disappeared when the marly limestones of the Shiranish Formation transgressed over the Bekmeh Platform. In the Aqra area the Maastrichtian Tanjero Formation laterally changed to the thick reefal sequence of the Aqra Formation that unconformably overlies by the Late Paleocene-Early Eocene lagoonal carbonate of the Khurmala Formation. The Campanian sedimentation is mainly controlled by NE- oriented normal faults forming Grabens in Dokan, Spilk and Soran areas. During the Maastrichtian in the extreme northeastern Kurdistan the NE-SW and NNW-SSE normal faults developed in the foredeep basin and originated horsts and grabens. 相似文献
7.
We constructed a geological map, a 3D model and cross-sections, carried out a structural analysis, determined the stress fields and tectonic transport vectors, restored a cross section and performed a subsidence analysis to unravel the kinematic evolution of the NE emerged portion of the Asturian Basin (NW Iberian Peninsula), where Jurassic rocks crop out. The major folds run NW-SE, normal faults exhibit three dominant orientations: NW-SE, NE-SW and E-W, and thrusts display E-W strikes. After Upper Triassic-Lower Jurassic thermal subsidence, Middle Jurassic doming occurred, accompanied by normal faulting, high heat flow and basin uplift, followed by Upper Jurassic high-rate basin subsidence. Another extensional event, possibly during Late Jurassic-Early Cretaceous, caused an increment in the normal faults displacement. A contractional event, probably of Cenozoic age, led to selective and irregularly distributed buttressing and fault reactivation as reverse or strike-slip faults, and folding and/or offset of some previous faults by new generation folds and thrusts. The Middle Jurassic event could be a precursor of the Bay of Biscay and North Atlantic opening that occurred from Late Jurassic to Early Cretaceous, whereas the Cenozoic event would be responsible for the Pyrenean and Cantabrian ranges and the partial closure of the Bay of Biscay. 相似文献
8.
Matías C. Ghiglione Javier Quinteros Daniel Yagupsky Pedro Bonillo-Martínez Julio Hlebszevtich Victor A. Ramos Gustavo Vergani Daniel Figueroa Santiago Quesada y Tomás Zapata 《Journal of South American Earth Sciences》2010,29(2):262-277
The common elements and differences of the neighboring Austral (Magallanes), Malvinas and South Malvinas (South Falkland) sedimentary basins are described and analyzed. The tectonic history of these basins involves Triassic to Jurassic crustal stretching, an ensuing Early Cretaceous thermal subsidence in the retroarc, followed by a Late Cretaceous–Paleogene compressional phase, and a Neogene to present-day deactivation of the fold–thrust belt dominated by wrench deformation. A concomitant Late Cretaceous onset of the foreland phase in the three basins and an integrated history during the Late Cretaceous–Cenozoic are proposed. The main lower Paleocene–lower Eocene initial foredeep depocenters were bounding the basement domain and are now deformed into the thin-skinned fold–thrust belts. A few extensional depocenters developed in the Austral and Malvinas basins during late Paleocene–early Eocene times due to a temporary extensional regime resulting from an acceleration in the separation rate between South America and Antarctica preceding the initial opening of the Drake Passage. These extensional depocenters were superimposed to the previous distal foredeep depocenter, postdating the initiation of the foredeep phase and the onset of compressional deformation. Another pervasive set of normal faults of Paleocene to Recent age that can be recognized throughout the basins are interpreted to be a consequence of flexural bending of the lithosphere, in agreement with a previous study from South Malvinas basin. Contractional deformation was replaced by transpressive kinematics during the Oligocene due to a major tectonic plate reorganization. Presently, while the South Malvinas basin is dominated by the transpressive uplift of its active margin with minor sediment supply, the westward basins undergo localized development of pull-apart depocenters and transpressional uplift of previous structures. The effective elastic thickness of the lithosphere for different sections of each basin is calculated using a dynamic finite element numerical model that simulates the lithospheric response to advancing tectonic load with active sedimentation. 相似文献
9.
Oblique rifting in Salina, Lipari and Vulcano islands (Aeolian islands, southern Italy) 总被引：1，自引：0，他引：1
A structural analysis carried out on the volcanic products of the islands of Salina, Lipari and Vulcano (Aeolian archipelago) points out that the large-scale tectonic setting is dominated by NW-SE trending right-lateral extensional strike-slip faults and by N-S to NE-SW trending normal faults and fractures. This fault pattern generates pull-apart type structures, developing between different right-hand overlapping fault segments and a characteristic extensional imbricate fan geometry at the tip of the major strike-slip faults. All the structures, representing the surface expression of an active crustal discontinuity which controls the evolutionary history of the magmatism of the three islands, are kinematically compatible with a N100°E extension related to a rifting process affecting southern Italy. 相似文献
10.
胶莱盆地及其邻区白垩纪－古新世沉积构造演化历史及其区域动力学意义 总被引：15，自引：2，他引：13
基于野外和钻孔测井资料分析、火山岩同位素年代学分析 (40Ar-39Ar and SHRIMP U-Pb)、地震剖面的构造解释、断层运动学的野外分析结果,综合研究了胶莱盆地及其邻区白垩纪－古新世沉积构造演化历史。岩性地层分析表明,胶莱断陷盆地由三套地层单元所充填：早白垩世莱阳群和青山群、晚白垩世－古新世王氏群。青山群火山岩的同位素年代学测试结果给出了该火山岩的喷发时代在120～105 Ma。地震剖面的构造解译结果揭示胶莱盆地伸展构造受到深部两个拆离构造系统控制：一个发育于盆地南部地区,拆离断面位于深部8~10 km,向南缓倾于苏鲁造山带之下;另一个拆离系统由一系列北倾的犁式断层组成、分布于宽阔的胶莱盆地北部地区,主拆离面向北倾。这两个拆离系统分别形成于早白垩世莱阳群和晚白垩世-古新世王氏群沉积阶段。通过对不同地层单元断层滑动矢量的野外测量和古构造应力场反演,以及地层时代和同位素年代学测试结果的制约,建立了白垩纪－古新世构造应力场演替的年代序列。结果表明,胶莱盆地在白垩纪-古新世之间经历了伸展－挤压应力体制的交替演化。早白垩世伸展作用经历了两个不同的阶段：早期NW-SE向伸展和晚期近W-E向伸展。在早白垩世末期至晚白垩世初期,盆地遭受NW-SE向挤压,导致了胶莱盆地的缩短变形和郯庐断裂带的左旋走滑活动。晚白垩世－古新世时期,构造应力场转变为N-S向伸展,直到古新世末期,构造应力场转换为NE－SW向挤压。胶莱盆地和沂沭裂谷系白垩纪－古新世沉积构造演化历史对华北地区岩石圈减薄过程的动力学背景提供了重要的构造地质学制约。笔者推断,早白垩世两期引张应力作用是分别对华北地区增厚地壳或岩石圈的重力垮塌和岩石圈拆沉的响应,而早白垩世末期NW-SE向挤压记录了古太平洋板块与亚洲陆缘俯冲碰撞产生的远程效应。晚白垩世-古新世的引张伸展作用完全不同于早白垩世伸展构造,它指示了沿NNE向郯庐断裂带的右旋走滑活动及其拉分作用,在动力学上受到青藏地区块体的陆－陆碰撞产生的远程效应和古太平洋板块向亚洲大陆俯冲作用的联合应力场控制。 相似文献
11.
川滇西部上新世以来构造地貌:断裂控制的盆地发育及对于远程陆内构造过程的约束 总被引：4，自引：0，他引：4
青藏高原隆升、周边地貌形成是新生代时期印度-欧亚板块碰撞后的重要响应。在滇西北地区发育了一系列由晚新生代(上新世以来)活动断裂所控制的盆地,例如宾川盆地、洱海盆地、鹤庆盆地、弥渡盆地等。宾川盆地是近南北向程海左行走滑断裂在走滑剪切作用下产生的北西向正断层和北东向走滑断层共同作用而形成的一个较大的拉分盆地。洱海盆地是由两组陡立的共轭张剪性(Transtensional)断层组限定的,为一伸展断陷盆地,总体上反映了近E-W向的区域伸展。滇西北地区发育的其它晚新生代盆地,如弥渡盆地、鹤庆盆地、剑川盆地等,也为区域走滑断裂及其分支断裂所控制,并且这些分支断裂在区域上为一组NE-SW和NW-SE向的共轭正断裂,反映了该区域近E-W向的伸展。将藏东南三江地区发育的活动断裂按照其走向分为三组:(1)NW-SE走向的断裂,如红河断裂、无量山-营盘山断裂等;(2)近N-S向断裂系,以程海断裂、小江断裂等为代表;(3)NE-SW走向的断裂,如丽江-剑川断裂、鹤庆-洱源断裂和南定河断裂等。这些断裂的震源机制解表明地震断裂活动性或者是走滑性质或者是伸展属性,它们的组合型式也揭示出藏东南三江地区在上新世以来表现为近E-W向的伸展。区域上,在藏东北部地区发育的断层构造组合普遍反映了以近E-W向挤压为主导的应力场。推测这一现象为上新世以来藏东地区上地壳围绕喜马拉雅东构造结做顺时针旋转所致,区域上受印度-欧亚会聚过程中印度板块顺时针旋转诱发的差异性应力场制约。 相似文献
12.
华南中-新生代构造演化受太平洋构造域和特提斯洋构造域的联合控制.以江南东段NE-SW向景德镇-歙县剪切带和球川-萧山断裂中发育的脆性断层为研究对象,利用野外交切关系和断层滑移矢量反演方法厘定了7期构造变形序列并反演了各期古构造应力场,讨论了断层活动的时代及其动力学.白垩纪至新生代研究区7期古构造应力场分别为:(1)早白垩世早期(136～125Ma)NW-SE向伸展;(2)早白垩世晚期(125～107Ma)N-S向挤压和E-W向伸展;(3)早白垩世末期至晚白垩世早期(105～86Ma)NW-SE向伸展;(4)白垩世中期(86～80Ma)NW-SE向挤压和NE-SW向伸展;(5)晚白垩世晚期至始新世末期(80～36Ma)N-S向伸展;(6)始新世末期至渐新世早期(36～30Ma)NE-SW向挤压和NW-SE向伸展;(7)渐新世早期至中新世中期(30～17Ma)NE-SW向伸展.结合区域地质研究表明,第1期至第4期古构造应力场与古太平洋构造域的板片后撤、俯冲以及微块体(菲律宾地块)间的碰撞作用有关;第5期伸展作用受控于新特提斯构造域俯冲板片后撤,而第6期和第7期古构造应力场主要与印-亚碰撞的远程效应有关.白垩纪至新生代,华南东部受伸展构造体制和走滑构造体制的交替控制.先存断裂的发育可能是导致华南晚中生代走滑构造体制的主要控制因素. 相似文献
13.
The NW-SE oriented Sorgenfrei–Tornquist Zone (STZ) has been thoroughly studied during the last 25 years, especially by means of well data and seismic profiles. We present the results of a first brittle tectonic analysis based on about 850 dykes, veins and minor fault-slip data measured in the field in Scania, including paleostress reconstruction. We discuss the relationships between normal and strike-slip faulting in Scania since the Permian extension to the Late Cretaceous–Tertiary structural inversions. Our paleostress determinations reveal six successive or coeval main stress states in the evolution of Scania since the Permian. Two stress states correspond to normal faulting with NE-SW and NW-SE extensions, one stress state is mainly of reverse type with NE-SW compression, and three stress states are strike-slip in type with NNW-SSE, WNW-ESE and NNE-SSW directions of compression.The NE-SW extension partly corresponds to the Late Carboniferous–Permian important extensional period, dated by dykes and fault mineralisations. However extension existed along a similar direction during the Mesozoic. It has been locally observed until within the Danian. A perpendicular NW-SE extension reveals the occurrence of stress permutations. The NNW-SSE strike-slip episode is also expected to belong to the Late Carboniferous–Permian episode and is interpreted in terms of right-lateral wrench faulting along STZ-oriented faults. The inversion process has been characterised by reverse and strike-slip faulting related to the NE-SW compressional stress state.This study highlights the importance of extensional tectonics in northwest Europe since the end of the Palaeozoic until the end of the Cretaceous. The importance and role of wrench faulting in the tectonic evolution of the Sorgenfrei–Tornquist Zone are discussed. 相似文献
14.
Radhouane Khouni Mohamed Sabri Arfaoui Soufiane Dridi Fouad Zargouni 《Arabian Journal of Geosciences》2018,11(4):68
During the Mesozoic and Cenozoic rifting, the Pelagian Sea recorded the consequences of the African and European plate’s rapprochement. The interpretation of surface and subsurface data that is the 2D seismic reflection and petroleum well data show new ideas on the geodynamic evolution and halokinesis of the Jeffara basin during the Mesozoic and Cenozoic period. Seismic lines interpretations of the subsurface mainly reveal normal syn-sedimentary NW-SE faulting and where the Jeffara fault seems to be the major play. This syn-sedimentary faulting induced horst and graben structures materialized by major sedimentary sequences thicknesses as well as depths variations on the seismic profiles from the Jeffara fault zone overall towards the East of Jeffara basin. After the Hercynian event of the Permian - Carboniferous age, a general extension took place, which gave rise to the Tethyan opening. This extension has favored the individualization of the Jeffara basin in the South East of Tunisia, characterized by a structuring in Horst and Graben with a Permian carbonate subsidence. During the Triassic - Middle Jurassic period, the Jeffara basin is marked by a pronounced subsidence of essentially evaporate sedimentation accompanied by the birth of normal syn-sedimentary NW-SE faults following an NE-SW extension. This subsidence continuing during the Upper Jurassic period, the accentuation of which is towards the NE of the study zone at the Jerba and El Bibane sub-basin with a dominance of bioclastic limestone and dolomites sedimentation in the same extensive NE-SW direction, during this period, the Jeffara basin was characterized by a beginning of salt activity indicated by the appearance of salt nuclei at the base of the preexisting NW-SE normal faults. During the Lower Cretaceous, we are witnessing an individualization of salt complexes in the SE of the study area at Rass Ajil sub-basin, where this reactive diapirism has produced high zones and erosions in the crest above the salt bodies. During the mid Cretaceous period, the Zebbag formation, hatched by the Gattar carbonate bar, recorded a subsidence inversion phenomenon between the three sub-basins Jerba, El Bibane and Rass Ajil sub-basin, and showed the change of movement of the African plate relative to the European plate related to the opening of the North Atlantic and the beginning of the drift towards the North of Africa. This phenomenon is concretized towards the Upper Cretaceous, where we witness a strong subsidence towards the southeastern part of the study area at Rass Ajil sub-basin with sandstone, marl and clay sedimentation under a regional extensive regime and the individualization of high zones at Jerba sub-basin. The salt movements present an active aspect by piercing their cover and inducing rim synclines in the surroundings. The Cenozoic period is characterized by a strong subsidence of sandstone, clays and carbonates along the Jeffara basin, the salt activity shows a passive aspect at the beginning of this period which slows down and eventually stopped at the late Miocene period, thus indicating the probable exhaustion of the source of the salt material. 相似文献
15.
六盘山盆地夹于鄂尔多斯地块、青藏地块和阿拉善地块之间,在中国大地构造体系中处于独特的构造位置。基于野外变形分析与断层滑动矢量构造应力场反演,初步确定了六盘山盆地形成与构造演化历史。结果表明,六盘山盆地主要经历了早白垩世成盆过程和后期改造过程2个大的阶段。早白垩世早期,受到区域近E-W向引张应力作用而发生断陷,盆内沉积了一套巨厚的河湖相六盘山群;早白垩世晚期在NW-SE向挤压下,断陷盆地发生构造反转,局部地区褶皱回返,六盘山群发生不同程度的断裂和褶皱变形,继而盆地开始了长期的隆升剥蚀作用。晚新生代,受到印度—欧亚大陆碰撞产生的远程效应,六盘山盆地先后经历了NE-SW向和近E-W向挤压应力作用,盆地发生了强烈的褶皱和断裂变形,六盘山快速隆起。六盘山盆地构造应力场演化历史不仅为研究周缘地块的运动学和动力学提供构造地质依据,也对盆地油气勘探具有指导意义。 相似文献
16.
大杨树盆地的构造特征及变形期次 总被引：4，自引：0，他引：4
大杨树盆地是叠置于大兴安岭造山带的东部,与松辽盆地紧邻,呈北北东向长条带状展布的中新生代断陷-坳陷型盆地。大杨树盆地经历了多期变形作用,具有以伸展构造为主、并被挤压构造和反转构造叠加的构造特征。早白垩世龙江期主要受到了NWW—SEE向的拉伸作用,形成一系列北北东向控陷犁式正断层组合,在控陷断层的上盘发育小型箕状断陷;早白垩世九峰山期,大杨树盆地受挤压作用控制,使早期形成的断陷盆地发生反转作用,形成正反转构造,同时在某些地段形成逆冲断层和断层传播褶皱;早白垩世甘河期,大杨树盆地再次受到伸展作用,形成了一系列北北东向小型断陷。早白垩世晚期(甘河期之后)—晚白垩世早期,大杨树盆地受到强烈的挤压作用,使早期控陷正断层出现正反转作用,在盆地的浅部形成大型断层传播褶皱,使大杨树盆地全面隆升遭受剥蚀。第四纪大杨树盆地具有伸展的特征,发育一系列小型伸展断陷。 相似文献
17.
胶莱盆地白垩纪构造应力场与转换机制 总被引：14，自引：3，他引：14
通过对胶莱盆地断层滑动矢量的收集与测量,利用计算机程序反演了盆地白垩纪的古构造应力场演化历史,并据此将盆地的发育划分为三个伸展阶段和三个挤压反转阶段,分别为早白垩世早-中期莱阳期伸展,与造山期后应力松弛重力坍塌有关;早白垩世中-晚期青山期伸展,受早白垩纪早期以后广泛的岩石圈减薄、大陆裂陷制约;晚白垩世王氏期伸展,与郯庐断裂及牟平-即墨断裂右旋走滑有关。三期伸展之间存在构造挤压反转,最后阐明各期盆地发育的地球动力学背景。 相似文献
18.
太行山隆起南段新构造变形过程研究 总被引：9，自引：0，他引：9
基于TM遥感影像解译和断裂滑动矢量资料的野外观测,结合年轻地质体热同位素和放射性同位素年代学测试结果分析,重点描述了太行山隆起南段构造地貌特征,划分了新构造变形阶段,确定了新构造应力场及其转换历史。研究表明,新近纪以来,太行山南段经历了两期重要的引张变形时期。中新世中晚期,伴随华北地区广泛的基性火山喷溢活动,太行山南段受近NE-SW向引张应力作用,构造变形集中在南段东缘和南缘断裂带上。上新世至早更新世时期,强烈的NW-SE向地壳引张导致太行山隆起南段夷平地貌的解体和地堑盆地的形成。自中晚更新世以来,太行山南缘断裂带成为新构造变形的主要边界带。断面滑动矢量分析和山前年轻冲积扇体和小冲沟沿断裂错移特征分析,表明太行山南缘断裂带是一条斜张左旋走滑边界断裂带,引张方向为NW-SE至NNW-SSE.从区域大地构造角度,中新世中国东部NE-SW向拉伸作用与东部太平洋板块向西俯仲导致的弧后扩张动力过程有关;而上新世以来新构造变形是与青藏高原快速隆升及其向东构造挤出作用有关。 相似文献
19.
山东胶莱盆地构造变形及形成演化——以王氏群和大盛群变形分析为例 总被引：12，自引：1，他引：12
胶莱盆地是形成于中生代晚侏罗世的陆相盆地，构造变形较为复杂。在野外断裂构造变形观测的基础上，结合年代学数据和地层沉积序列，确立了胶莱盆地白垩纪的变形演化历史。总体上，胶莱盆地在形成和演化过程中沉积了3套地层，经历了多个构造变形阶段。其中，发生在白垩纪的变形阶段主要有：(1)早白垩世早期，鲁东地区受区域近E—W向引张应力场控制，胶莱盆地发生大规模的火山喷发，喷发间歇期沉积了大盛群；早白垩世晚期，受强烈的区域性NW—SE向挤压，胶莱盆地褶皱回返。(2)晚白垩世早期，在区域近S—N向引张应力作用下，诸城断陷盆地发育，王氏群沉积；晚白垩世晚期，胶莱盆地受区域性NE—SW向挤压，导致王氏群褶皱变形。 相似文献
20.
河西走廊北部的平山湖盆地,被围限于龙首山、北大山和合黎山之间,是一个在早白垩世受南北两侧逆冲断层共同控制形成并发展的盆地。笔者通过研究盆地内下白垩统沉积特征、构造变形、生长地层以及碎屑锆石U-Pb年代学特征,划分了平山湖盆地在早白垩世的构造演化期次,并恢复其形成演化过程。盆地内发育一套由下向上总体变细的下白垩统庙沟群沉积序列,盆地内构造变形以NE-SW向挤压和近E-W向伸展为主,庙沟群上岩组的碎屑锆石最小年龄为(129.3±1.8)Ma,可能代表了地层沉积和同期地堑发育的最早时间。由此得出,在早白垩世早期发育挤压构造盆地,同构造生长地层为挤压盆地的形成与构造演化提供了时代约束;在早白垩世晚期发育伸展断陷盆地,由挤压到伸展的转换时间晚于129.3 Ma。 相似文献