首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 328 毫秒
1.
Isobaric and isothermal experiments were performed to investigate the effect of melt composition on the partitioning of trace elements between titanite (CaTiSiO5) and a range of different silicate melts. Titanite-melt partition coefficients for 18 trace elements were determined by secondary ion mass spectrometry (SIMS) analyses of experimental run products. The partition coefficients for the rare earth elements and for Th, Nb, and Ta reveal a strong influence of melt composition on partition coefficients, whereas partition coefficients for other studied monovalent, divalent and most quadrivalent (i.e., Zr, Hf) cations are not significantly affected by melt composition. The present data show that the influence of melt composition may not be neglected when modelling trace element partitioning.It is argued that it is mainly the change of coordination number and the regularity of the coordination space of trace elements in the melt structure that controls partition coefficients in our experiments. Furthermore, our data also show that the substitution mechanism by which trace elements are incorporated into titanite crystals may be of additional importance in this context.  相似文献   

2.
This experimental study examines the mineral/melt partitioning of Na, Ti, La, Sm, Ho, and Lu among high-Ca clinopyroxene, plagioclase, and silicate melts analogous to varying degrees of peridotite partial melting. Experiments performed at a pressure of 1.5 GPa and temperatures of 1,285 to 1,345 °C produced silicate melts saturated with high-Ca clinopyroxene, plagioclase and/or spinel, and, in one case, orthopyroxene and garnet. Partition coefficients measured in experiments in which clinopyroxene coexists with basaltic melt containing ~18 to 19 wt% Al2O3 and up to ~3 wt% Na2O are consistent with those determined experimentally in a majority of the previous studies, with values of ~0.05 for the light rare earths and of ~0.70 for the heavy rare earths. The magnitudes of clinopyroxene/melt partition coefficients for the rare earth elements correlate with pyroxene composition in these experiments, and relative compatibilities are consistent with the effects of lattice strain energy. Clinopyroxene/melt partition coefficients measured in experiments in which the melt contains ~20 wt% Al2O3 and ~4 to 8 wt% Na2O are unusually large (e.g., values for Lu of up to 1.33±0.05) and are not consistent with the dependence on pyroxene composition found in previous studies. The magnitudes of the partition coefficients measured in these experiments correlate with the degree of polymerization of the melt, rather than with crystal composition, indicating a significant melt structural influence on trace element partitioning. The ratio of non-bridging oxygens to tetrahedrally coordinated cations (NBO/T) in the melt provides a measure of this effect; melt structure has a significant influence on trace element compatibility only for values of NBO/T less than ~0.49. This result suggests that when ascending peridotite intersects the solidus at relatively low pressures (~1.5 GPa or less), the compatibility of trace elements in the residual solid varies significantly during the initial stages of partial melting in response to the changing liquid composition. It is unlikely that this effect is important at higher pressures due to the increased compatibility of SiO2, Na2O, and Al2O3 in the residual peridotite, and correspondingly larger values of NBO/T for small degree partial melts.Editorial responsibility: T.L. Grove  相似文献   

3.
Eclogite of recycled slab origin has often been invoked in the source region of mid-ocean ridge and ocean-island basalts. Melts of this eclogitic material are expected to be enriched in incompatible elements including major elements such as Na and Ti. In order to investigate the controls on trace element chemistry of a melt from such a recycled component we have performed trace element partitioning experiments in the simple systems CMAS (CaO-MgO-Al2O3-SiO2), NCMAS (Na2O-CMAS) and Ti-CMAS (TiO2-CMAS) at 3 GPa and 1298-1500°C using analogue eclogitic compositions.We show that sodium has a profound effect on clinopyroxene-melt partition coefficients. NCMAS is characterized by elevated partition coefficients, relative to CMAS for all elements except Li. The increase is more pronounced for more highly charged cations, resulting in negative partitioning anomalies for Li, Sr, Ba and Pb. In contrast to sodium, titanium has very little effect on trace element partitioning for all elements except Nb and Ta, which are retained by the rutile that is saturated in this run.  相似文献   

4.
Trace element partitioning between apatite and silicate melts   总被引：7，自引：0，他引：7  
We present new experimental apatite/melt trace element partition coefficients for a large number of trace elements (Cs, Rb, Ba, La, Ce, Pr, Sm, Gd, Lu, Y, Sr, Zr, Hf, Nb, Ta, U, Pb, and Th). The experiments were conducted at pressures of 1.0 GPa and temperatures of 1250 °C. The rare earth elements (La, Ce, Pr, Sm, Gd, and Lu), Y, and Sr are compatible in apatite, whereas the larger lithophile elements (Cs, Rb, and Ba) are strongly incompatible. Other trace elements such as U, Th, and Pb have partition coefficients close to unity. In all experiments we found DHf > DZr, DTa ≈ DNb, and DBa > DRb > DCs. The experiments reveal a strong influence of melt composition on REE partition coefficients. With increasing polymerisation of the melt, apatite/melt partition coefficients for the rare earth elements increase for about an order of magnitude. We also present some results in fluorine-rich and water-rich systems, respectively, but no significant influence of either H2O or F on the partitioning was found. Furthermore, we also present experimentally determined partition coefficients in close-to natural compositions which should be directly applicable to magmatic processes.  相似文献   

5.
Low-Ca pyroxenes play an important role in mantle melting, melt-rock reaction, and magma differentiation processes. In order to better understand REE fractionation during adiabatic mantle melting and pyroxenite-derived melt and peridotite interaction, we developed a parameterized model for REE partitioning between low-Ca pyroxene and basaltic melts. Our parameterization is based on the lattice strain model and a compilation of published experimental data, supplemented by a new set of trace element partitioning experiments for low-Ca pyroxenes produced by pyroxenite-derived melt and peridotite interaction. To test the validity of the assumptions and simplifications used in the model development, we compared model-derived partition coefficients with measured partition coefficients for REE between orthopyroxene and clinopyroxene in well-equilibrated peridotite xenoliths. REE partition coefficients in low-Ca pyroxene correlate negatively with temperature and positively with both calcium content on the M2 site and aluminum content on the tetrahedral site of pyroxene. The strong competing effect between temperature and major element compositions of low-Ca pyroxene results in very small variations in REE partition coefficients in orthopyroxene during adiabatic mantle melting when diopside is in the residue. REE partition coefficients in orthopyroxene can be treated as constants at a given mantle potential temperature during decompression melting of lherzolite and diopside-bearing harzburgite. In the absence of diopside, partition coefficients of light REE in orthopyroxene vary significantly, and such variations should be taken into consideration in geochemical modeling of REE fractionation in clinopyroxene-free harzburgite. Application of the parameterized model to low-Ca pyroxenes produced by reaction between pyroxenite-derived melt and peridotite revealed large variations in the calculated REE partition coefficients in the low-Ca pyroxenes. Temperature and composition of starting pyroxenite must be considered when selecting REE partition coefficients for pyroxenite-derived melt and peridotite interaction.  相似文献   

6.
In this experimental study, we examine the mineral-melt partitioning of major and trace elements between clinopyroxene and CO2-rich kimberlitic melts at a pressure of 6 GPa and temperatures of 1410°C and 1430°C. The melts produced contain ∼ 28 wt% dissolved CO2, and are saturated with olivine and clinopyroxene. To assess the effects of temperature, crystal and melt compositions on trace element partitioning, experiments were performed in the model CaO-MgO-Al2O3-SiO2-CO2 system. Our results reveal that all the elements studied, except Al, Mg, Si, and Ga, are incompatible in clinopyroxene. Partition coefficients show a considerable range in magnitude, from ∼ 10−3 for DU and DBa to ∼ 2.5 for DSi. The two experimental runs show similar overall partitioning patterns with the D values being lower at 1430°C. Rare earth elements display a wide range of partition coefficients, DLa (0.012-0.026) being approximately one order of magnitude lower than DLu (0.18-0.23). Partition coefficients for the 2+ and 3+ cations entering the M2-site exhibit a near-parabolic dependence on radius of the incorporated cations as predicted from the lattice strain model. This underlines the contribution made by the crystal structure toward controlling the distribution of trace elements. Using data obtained in this study combined with that in the published literature, we also discuss the effects that other important parameters, namely, melt composition, pressure, and temperature, could have on partitioning.Our partition coefficients have been used to model the generation of the Group I (GI) kimberlites from South Africa. The numerical modeling shows that kimberlitic melts can be produced by ∼0.5% melting of a MORB-type depleted source that has been enriched by small-degree melts originating from a similar depleted source. This result suggests that the source of GI kimberlites may be located at the lithosphere-asthenosphere transition. Percolation of small degree melts from the asthenosphere would essentially create a metasomatic horizon near the bottom of the non-convecting sublithospheric mantle. Accumulation of such small degree melts together with the presence of volatiles and conductive heating would trigger melting of the ambient mantle and subsequently lead to eruption of kimberlitic melts. Additionally, our model shows that the GI source can be generated by metasomatism of a 2 Ga old MORB source ca. 1 Ga ago. Assuming that MORB-type mantle is the most depleted source of magmas on earth, then this is the oldest age at which the GI source could have existed. However, this age most likely reflects the average age of a series of metasomatic events than that of a single event.  相似文献   

7.
The occurrence of CO2-rich lavas (carbonatites, kimberlites) and carbonate-rich xenoliths provide evidence for the existence of carbonatitic melts in the mantle. To model the chemical composition of such melts in the deep mantle, we experimentally determined partition coefficients for 23 trace elements (including REE, U-Th, HFSE, LILE) between deep mantle minerals and carbonatite liquids at 20 and 25 GPa and 1600 °C. Under these conditions, majoritic garnet and CaSiO3 perovskite are the main reservoirs for trace elements. This study used both femtosecond LA-ICP-MS and SIMS techniques to measure reliable trace element concentrations. Comparison of the two techniques shows a general agreement, except for Sc and Ba. Our experimentally determined partition coefficients are consistent with the lattice strain model. The data suggest an effect of melt structure on partition coefficients in this pressure range. For instance, strain-free partition coefficient (D0) for majorite-carbonatite melts do not follow the order of cation valence, , observed for majorite-CO2-free silicate melts. The newly determined partition coefficients were combined with trace element composition of majoritic garnets found as inclusions in diamond to model trace element patterns of deep-seated carbonatites. The result compares favorably with natural carbonatites. This suggests that carbonatites can originate from the mantle transition zone.  相似文献   

8.
Olivine/melt and orthopyroxene/melt rare-earth element (REE) partition coefficients consistent with clinopyroxene/melt partition coefficients were determined indirectly from subsolidus partitioning between olivine, orthopyroxene, and clinopyroxene after suitable correction for temperature. Heavy- and middle-REE ratios for olivine/clinopyroxene and orthopyroxene/clinopyroxene pairs correlate negatively with effective cationic radius, whereas those for the light REEs correlate positively with cationic radius, generating a U-shaped pattern in apparent mineral/clinopyroxene partition coefficients versus cationic radius. Lattice strain models of partitioning modified for subsolidus conditions yield negative correlations of olivine/clinopyroxene and orthopyroxene/clinopyroxene with respect to cationic radii, predicting well the measured partitioning behaviors of the heavy and middle REEs but not that of the light REEs. The light-REE systematics cannot be explained with lattice strain theory and, instead, can be explained by disequilibrium enrichment of the light REEs in melt inclusions or on the rims of olivine and orthopyroxene. Realistic light-REE partition coefficients were thus extrapolated from the measured heavy- and middle-REE partition coefficients using the lattice strain model. Light REE olivine/melt and orthopyroxene/melt partition coefficients calculated in this manner are lower than most published values, but agree reasonably well with partitioning experiments using the most recent in situ analytical techniques (secondary-ionization mass spectrometry and laser ablation inductively coupled plasma mass spectrometry). These new olivine/melt and orthopyroxene/melt partition coefficients are useful for accurate modeling of the REE contents of clinopyroxene-poor to -free lithologies, such as harzburgitic residues of melting. Finally, the application of the lattice strain theory to subsolidus conditions represents a framework for assessing the degree of REE disequilibrium in a rock.  相似文献   

9.
Experiments in the systems diopside-albite (Di-Ab) and diopside-albite-dolomite (Di-Ab-Dmt), doped with a wide range of trace elements, have been used to characterise the difference between clinopyroxene-silicate melt and clinopyroxene-carbonate melt partitioning. Experiments in Di-Ab-Dmt yielded clinopyroxene and olivine in equilibrium with CO2-saturated dolomitic carbonate melt at 3 GPa, 1375 °C. The experiments in Di-Ab were designed to bracket those conditions (3 GPa, 1640 °C and 0.8 GPa, 1375 °C), and so minimise the contribution of differential temperature and pressure to partitioning. Partition coefficients, determined by SIMS analysis of run products, differ markedly for some elements between Di-Ab and Di-Ab-Dmt systems. Notably, in the carbonate system clinopyroxene-melt partition coefficients for Si, Al, Ga, heavy REE, Ti and Zr are higher by factors of 5 to 200 than in the silicate system. Conversely, partition coefficients for Nb, light REE, alkali metals and alkaline earths show much less fractionation (<3). The observed differences compare quantitatively with experimental data on partitioning between immiscible carbonate and silicate melts, indicating that changes in melt chemistry provide the dominant control on variation in partition coefficients in this case. The importance of melt chemistry in controlling several aspects of element partitioning is discussed in light of the energetics of the partitioning process. The compositions of clinopyroxene and carbonate melt in our experiments closely match those of near-solidus melts and crystals in CMAS-CO2 at 3 GPa, suggesting that our partition coefficients have direct relevance to melting of carbonated mantle lherzolite. Melts so produced will be characterised by elevated incompatible trace element concentrations, due to the low degrees of melting involved, but marked depletions of Ti and Zr, and fractionated REE patterns. These are common features of natural carbonatites. The different behaviour of trace elements in carbonate and silicate systems will lead to contrasted styles of trace element metasomatism in the mantle. Received: 15 July 1999 / Accepted: 18 February 2000  相似文献   

10.
High-pressure melting experiments were performed at ~26 GPa and ~2,200–2,400°C on synthetic peridotite compositions with varying FeO and Al2O3 contents and on a synthetic CI chondrite analogue composition. Peridotite liquids show a crystallisation sequence of ferropericlase (Fp) followed down temperature by Mg-silicate perovskite (MgPv) + Fp, which contrasts a sequence of MgPv followed by MgPv + Fp observed in the chondritic composition. The difference in crystallisation sequence is a consequence of the different bulk Mg/Si ratios. MgPv/melt partition coefficients for major, minor and trace elements were determined by electron microprobe and secondary ion mass spectrometry. Partition coefficients of tri- and tetravalent elements increase with increasing Al concentration in MgPv. A lattice strain model indicates that Al3+ substitutes predominantly onto the Si-site in MgPv, whereas most elements substitute onto the Mg-site, which is consistent with a charge-compensating coupled substitution mechanism. MgPv/melt partition coefficients for Mg (DMg) and Si (DSi) are related to the melt Mg/Si ratio such that DSi becomes lower than DMg at low Mg/Si melt ratios. We use a crystal fractionation model, based on upper mantle refractory lithophile element ratios, to constrain the amount of MgPv and Ca-silicate perovskite (CaPv) that could have fractionated during a Hadean magma ocean event and could still be present as a chemically distinct heterogeneity in the lower mantle today. We show that a fractionated crystal pile composed of 96% MgPv and 4% CaPv could comprise up to 13 wt% of the entire mantle.  相似文献   

11.
Calcium- and aluminum-rich inclusions (CAIs), occurring in chondritic meteorites and considered the oldest materials in the solar system, can provide critical information about the environment and time scale of creation of planetary materials. However, interpretation of the trace element and isotope compositions of CAIs, particularly the light elements Li, Be, and B, is hampered by the lack of constraint on melilite-melt and spinel-melt partition coefficients. We determined melilite-melt and spinel-melt partition coefficients for 21 elements by performing controlled cooling rate (2 °C/h) experiments at 1 atmosphere pressure in sealed platinum capsules using a synthetic type B CAI melt. Trace element concentrations were measured by secondary ion mass spectrometry (SIMS) and/or laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). Melilites vary only slightly in composition, ranging from Åk31-43. Results for the partitioning of trace elements between melilite and melt in three experiments and between spinel and melt in two experiments show that partition coefficients are independent of trace element concentration, are in good agreement for different analytical techniques (SIMS and LA-ICP-MS), and are in agreement with previous measurements in the literature. Partition coefficients between intermediate composition melilites and CAI melt are the following: Li, 0.5; Be, 1.0; B, 0.22; Rb, 0.012; Sr, 0.68; Zr, 0.004; Nb, 0.003; Cs, 0.002; Ba, 0.018; La, 0.056; Nd, 0.065; Sm, 0.073; Eu, 0.67; Er, 0.037; Yb, 0.018; Hf, 0.001; Ta, 0.003; Pb, 0.15; U, 0.001; Th, 0.002. Site size energetics analysis is used to assess isovalent partitioning into the different cation sites. The Young’s modulus deduced from +2 cations partitioning into the melilite X site agrees well with the bulk modulus of melilite based on X-ray diffraction methods. The changes in light element partitioning as melilite composition varies are predicted and used in several models of fractional crystallization to evaluate if the observed Li, Be, and B systematics in Allende CAI 3529-41 are consistent with crystallization from a melt. Models of crystallization agree reasonably well with observed light element variations in areas previously interpreted to be unperturbed by secondary processes [Chaussidon, M., Robert, F., McKeegan, K.D., 2006. Li and B isotopic variations in an Allende CAI: Evidence for the in situ decay of short-lived 10Be and for the possible presence of the short-lived nuclide 7Be in the early solar system. Geochim. Cosmochim. Acta70, 224-245], indicating that the trends of light elements could reflect fractional crystallization of a melt. In contrast, areas interpreted to have been affected by alteration processes are not consistent with crystallization models.  相似文献   

12.
The distribution of rare earth elements (REE) between clinopyroxene (cpx) and basaltic melt is important in deciphering the processes of mantle melting. REE and Y partition coefficients from a given cpx-melt partitioning experiment can be quantitatively described by the lattice strain model. We analyzed published REE and Y partitioning data between cpx and basaltic melts using the nonlinear regression method and parameterized key partitioning parameters in the lattice strain model (D 0, r 0 and E) as functions of pressure, temperature, and compositions of cpx and melt. D 0 is found to positively correlate with Al in tetrahedral site (Al T ) and Mg in the M2 site (MgM2) of cpx and negatively correlate with temperature and water content in the melt. r 0 is negatively correlated with Al in M1 site (AlM1) and MgM2 in cpx. And E is positively correlated with r 0. During adiabatic melting of spinel lherzolite, temperature, Al T , and MgM2 in cpx all decrease systematically as a function of pressure or degree of melting. The competing effects between temperature and cpx composition result in very small variations in REE partition coefficients along a mantle adiabat. A higher potential temperature (1,400°C) gives rise to REE partition coefficients slightly lower than those at a lower potential temperature (1,300°C) because the temperature effect overwhelms the compositional effect. A set of constant REE partition coefficients therefore may be used to accurately model REE fractionation during partial melting of spinel lherzolite along a mantle adiabat. As cpx has low Al and Mg abundances at high temperature during melting in the garnet stability field, REE are more incompatible in cpx. Heavy REE depletion in the melt may imply deep melting of a hydrous garnet lherzolite. Water-dependent cpx partition coefficients need to be considered for modeling low-degree hydrous melting.  相似文献   

13.
The partitioning of trace elements (Sc, Ti, Sr and Sm) between diopsidic clinopyroxene and liquid was studied experimentally in the system diopside-albite-anorthite at 1250°C, 1300°C and 1345°C at 1 atm. Twelve different bulk compositions were selected to study the effects of temperature and chemical composition. A Cameca ion microprobe was used to determine trace element concentrations in both clinopyroxene and liquid. Experiments of different run duration 148? days) showed that equilibrium was approached in less than 4 days at 1275°C. Equilibrium was also evaluated by a reversal run. A series of runs of constant bulk composition but with variable trace element contents showed that Henry's Law was obeyed over concentration ranges of the trace elements similar to those encountered in natural systems. The partition coefficients show significant ranges: Sc, 0.345~2.61; Ti, 0.084~0.214; Sr, 0.075~0.136; Sm, 0.054~0.328; the values are comparable with those obtained experimentally by other investigators. The partition coefficients vary as a function of both temperature and chemical composition. The experimental results are discussed in terms of exchange equilibria using the Bottinga-Weill silicate melt model. It is demonstrated that analytical uncertainties of both major and trace elements play an important role in understanding trace element exchange equilibria; propagation of analytical errors in the thermodynamic treatment is equally important.  相似文献   

14.
Analyses of trace elements in the mineral phases of granulites provide important information about the trace element distribution in the lower crust. Since granulites are often considered residues of partial melting processes, trace element characteristics of their mineral phases may record mineral/melt equilibria thus giving an opportunity to understand the nature and composition of melts in the lower continental crust. This study provides an extensive set of mineral trace element data obtained by LA-ICP-MS analyses of mafic and intermediate granulites from Central Finland. Mass balance calculations using the analytical data indicate a pronounced contribution of the accessory minerals apatite for the REE and ilmenite for the HFSE. Coherent mineral/mineral ratios between samples point to a close approach to equilibrium except for minerals intergrown with garnet porphyroblasts. Mineral trace element data were used for the formulation of a set of D mineral/melt partition coefficients that is applicable for trace element modelling under lower crustal conditions. D mineral/melt were derived by the application of predictive models and using observed constant mineral/mineral ratios. The comparison of the calculated D mineral/melt with experimental data as well as the relationship between mineral trace element contents and a leucosome with a composition close to an equilibrium melt provides additional constraints on mineral/melt partitioning. The D values derived in this study are broadly similar to magmatic partition coefficients for intermediate melt compositions. They provide a first coherent set of D values for Sc, V, Cr and Ni between clinopyroxene, amphibole, garnet, orthopyroxene, ilmenite and melt. In addition, they emphasize the strong impact that ilmenite exerts on the distribution of Nb and Ta.  相似文献   

15.
G. Dobosi  G. A. Jenner   《Lithos》1999,46(4):14-749
Clinopyroxene megacrysts in alkali basalts are an important source of information about the evolution of magmatic systems at depth. In this study, we have undertaken a detailed examination of the trace element contents in a suite of megacrysts from 2.5 Ma old alkali basalts in the Nógrád volcanic province of Hungary and Slovakia. The megacrysts range in composition from Mg-rich and in equilibrium with their host magmas, to those that are Fe-rich and must have evolved in more fractionated magmas. The conditions of crystallization of these megacrysts, as calculated from the AlVI/AlIV ratios, suggests they all formed at about 30 km, or the crust–mantle boundary in this area. Using the most magnesian megacrysts and compositions of the host lavas, we have calculated the partition coefficients for a range of trace elements. However, the trace element contents in the megacrysts show a systematic variation with major element composition. Moreover, the rate of increase or change in the trace element concentrations is not consistent with models involving constant or steady state partition coefficients. Using a series of assumptions and models, we hypothesize that the partition coefficients between clinopyroxene and melt change substantially during the magmatic evolution of the system. This change is not constant for each element group, with the high field strength elements showing the most substantial increases. Electrostatic charge balance may have been the most important factor in controlling the mineral/melt partitioning.  相似文献   

16.
We present detailed experimental results on the partitioning of rare earth elements (REE) between titanite and a range of different silicate melts. Our results show that Henry’s law of trace element partitioning depends on bulk composition, the available partners for heterovalent substitution, crystal composition, and melt composition. We illustrate that the partition coefficients for Sm depend very strongly on the bulk concentration of Sm in the system. The substitution mechanism, by which rare earth elements are incorporated into the crystal structure, plays an important role for trace element partitioning and also for the onset of Henry’s law. Our data show that there are clear differences between substitution mechanisms of major elements compared to elements which are present only as traces. Our experiments also clearly show that the onset of Henry’s law depends on the concentrations of the sum of all trace elements which are incorporated into the crystal by the same substitution mechanism. For geochemical modelling of magmatic processes involving titanite, and indeed other accessory phases, it is of crucial importance to first evaluate whether the REE, and other trace elements, are present as traces or as major elements, only then appropriate D values may be chosen.  相似文献   

17.
The evolution of major mineral compositions and trace element abundances during fractional crystallization of a model lunar magma ocean have been calculated. A lunar bulk composition consistent with petrological constraints has been selected. Major mineral compositions have been calculated using published studies of olivine-melt, plagioclase-melt, and pyroxene-olivine equilibria. Trace element abundances have been calculated using experimentally-determined partition coefficients where possible. In the absence of experimental determinations, published partition coefficients obtained by analyzing phase separates from porphyritic volcanic rocks have been used. Trace elements studied are La, Sm, Eu, Lu, Rb, Sr( Eu2+), Ni, Co, and Cr.The first mineral to crystallize is olivine, which varies in composition from Fo98 at the liquidus to Fo95 at 50% solidification. Orthopyroxene crystallizes from 50 to 60% solidification with a restricted composition range of En95-En93. Plagioclase and Ca-rich clinopyroxene (XWo arbitrarily set equal to 0.5) co-crystallize during the final 40% solidification. Plagioclase changes in composition from An97 to approximately An93, while clinopyroxene evolves from En46 to approximately En40. The concomitant evolution of major element abundances in the melt is also discussed.The concentration of Ni in the melt decreases rapidly because solid-melt partition coefficients are significantly greater than unity at all stages of crystallization. The concentration of Cr in the melt increases slowly during olivine crystallization, then drops precipitously during the crystallization of orthopyroxene and clinopyroxene. The concentration of Co in the melt decreases slowly during olivine and orthopyroxene crystallization, after which it returns slowly to its initial concentration. Rubidium and Sr are not fractionated relative to one another until the onset of plagioclase crystallization. Ratios of Rb/Sr, normalized to their initial concentrations in the magma, do not rise above 10 until 95% of the magma has solidified. The ratios of Eu/Sm and La/Lu, normalized to their initial concentrations in the magma, remain essentially unfractionated until the onset of crystallization of clinopyroxene plus plagioclase, at which point the normalized La/Lu ratio increases to approximately 1.3 at 100% solidification and the normalized Eu/Sm ratio decreases to approximately 0.2 at 100% solidification.The model calculations are used to place approximate constraints on the bulk composition of the primitive Moon. Consideration of the effect on plagioclase composition of the activities of NaO0.5 and SiO2 in the melt suggests that the primitive Moon contained less than 0.4 wt % NaO0.5 and approximately 42–43 wt % SiO2. Concentrations of the REE in model lunar anorthosites are consistent with the returned samples. Concentrations of the REE in several model ‘highland basalts’ (considered to be representative of the average lunar terrae) are too low when compared with returned samples. Several possible explanations of this discrepancy are considered. The possible role of spinel in a twostage geochemical evolution of mare basalt liquids is discussed.  相似文献   

18.
In an effort to obtain information about mineral/melt trace element partitioning during the high pressure petrogenesis of basic rocks, we determined rare earth and other trace element abundances in megacrysts of clinopyroxene, orthopyroxene, amphibole, mica, anorthoclase, apatite and zircon, and in their host basalts. In general, the ranges of mineral/melt partition coefficients established from experimental partitioning studies and phenocryst/matrix measurements overlap with the ranges of megacryst/host abundance ratios. Our data for Hf, Sc, Ta and Th partitioning represent some of the only estimates available. Consideration of phase equilibria, major element partitioning and isotopic ratios indicate that most of the pyroxene and amphibole megacrysts may have been in equilibrium with their host magmas at high pressures (mostly 10–25 kb). In contrast, it is unlikely that mica, anorthoclase, apatite and zircon megacrysts formed in equilibrium with their host basalts; instead, we conclude that they were precipitated from more evolved magmas and have been mixed into their present host magmas. Consequently, the trace element abundance ratios for megacryst/host should not be interpreted as partition coefficients, but only as guides for understanding trace element partitioning during high pressure petrogenesis. With this caveat, we conclude that the megacryst/ host trace element abundance data indicate that mineral/melt partition coefficients in basaltic systems during high pressure fractionation are not drastically different from partition coefficients valid for low pressure fractionation.  相似文献   

19.
We have determined the partitioning of a wide range of trace elements between silicate melts and CaSiO3 and MgSiO3 perovskites using both laser ablation-ICPMS and ion microprobe techniques. Our results show that, with the exception of Sc, Zr, and Hf, all trace elements we considered are incompatible in MgSiO3 perovskite, from highly incompatible for U, Th, Ba, La, Sr and monovalent elements to slightly incompatible for heavy rare earth elements. MgSiO3 perovskite-melt partition coefficients increase slightly with Al content in the perovskite. These observations contrast strongly with partitioning between CaSiO3 perovskite and silicate melts. In the latter case, all rare earth elements are clearly compatible as are U and Th. Our data also suggest that, contrary to pressure and temperature, melt composition can significantly affect CaSiO3 perovskite-melt partitioning; partition coefficients for rare earth elements and U and Th increase with decreasing CaO melt content. The presence of ∼0.4 wt% water in melt makes little difference, however. Partitioning of trace elements into the large site of both MgSiO3 and CaSiO3 perovskites follows the near-parabolic dependence on ionic radius predicted from the lattice strain model. The peaks of the parabolae are much higher for the CaSiO3 phase, perhaps suggesting that the mechanisms of charge compensation for heterovalent substitution are different in the two cases. Our partitioning data have been used to assess the potential effect of perovskite fractionation into the lower mantle during early Earth history. Crystallisation of less than 8% of a mixture of CaSiO3 and MgSiO3 perovskites could have led to a ‘layer’ enriched in U and Th without disturbing the chondritic pattern of refractory lithophile elements in the primitive upper mantle. The resultant reservoir could have high Sm/Nd, U/Pb, Sr/Rb, Lu/Hf ratios similar to the HIMU component of ocean island basalts, but would not balance the observed depletion of the primitive upper mantle in Si and Nb.  相似文献   

20.
锆石是地质学研究中最重要的副矿物,其分布广泛、物理、化学性质稳定,记录了结晶时的年龄、温度、氧逸度以及O-Hf-Si-Zr-Li等多元同位素和微量元素信息,被广泛运用于地球科学的研究中。近年来,随着分析技术的发展,研究者在获取锆石年龄的同时也获取了大量锆石微量元素数据,这些数据的积累推动着研究者对锆石微量元素理论研究的不断深入,并取得了一系列重要进展,如发现锆石微量元素组成受锆石本身的晶格特点主导,符合晶格应变模型和类质同象替代机制;发现锆石微量元素组成受到熔体成分演化影响,锆石结晶时的熔体微量元素组成往往不等同于全岩;发现锆石内部的微量元素不均一特征(矿物包裹体、热点、蜕晶化作用等)可能会严重影响锆石的微量元素组成,继而建立了"干净锆石"的判别指标和筛选机制。此外,锆石微量元素的应用研究也取得了长足进展,研究者们不断尝试通过各类锆石微量元素指标、图解、分配系数,识别母岩浆物理化学性质、反演母岩浆组成,大大推动了锆石微量元素在示踪岩浆源区和岩浆过程中的应用。然而,由于锆石微量元素组成受控于多种因素,使得锆石微量元素在实际应用当中常常面临着多解性问题、重叠问题和分配系数的选择问题,在一定程度上影响了锆石微量元素应用研究的可靠性。未来的锆石微量元素研究将不满足于使用传统的低维指标和图解以及分配系数,而将在充分吸收传统方法精华的基础上,从海量数据与更高的维度中寻找元素之间相关性,基于热力学定律揭示新原理,基于更高空间分辨率揭示动力学因素的影响,从数据驱动和理论驱动的全新视角下深入揭示隐藏在锆石微量元素中的信息。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号