共查询到20条相似文献，搜索用时 609 毫秒
1.
The solubility of ZnS(cr) was measured at 100 °C, 150 bars in sulfide solutions as a function of sulfur concentration (m(Stotal) = 0.02-0.15) and acidity (pHt = 2-11). The experiments were conducted using a Ti flow-through hydrothermal reactor enabling the sampling of large volumes of solutions at experimental conditions, with the subsequent concentration and determination of trace quantities of Zn. Prior to the experiments, a long-term in situ conditioning of the solid phase was performed in order to attain the reproducible Zn concentrations (i.e. solubilities). The ZnS(cr) solubility product was monitored in the course of the experiment. The following species were found to account for Zn speciation in solution: Zn2+ (pHt < 3), (pHt 3-4.5), (pHt 5-8), and ZnS(HS)− (pHt > 8) (pHt predominance regions are given for m(Stotal) = 0.1). Solubility data collected in this study at pHt > 3 were combined with the ZnS(cr) solubility product determined at lower pH to yield the following equilibrium constants (t = 100 °C, P = 150 bars):
2.
Thomas Fockenberg Michael Burchard Walter V. Maresch 《Geochimica et cosmochimica acta》2006,70(7):1796-1806
The solubility of natural, near-end-member wollastonite-I (>99.5% CaSiO3) has been determined at temperatures from 400 to 800 °C and pressures between 0.8 and 5 GPa in piston-cylinder apparatus with the weight-loss method. Chemical analysis of quench products and optical monitoring in a hydrothermal diamond anvil cell demonstrates that no additional phases form during dissolution. Wollastonite-I, therefore, dissolves congruently in the pressure-temperature range investigated. The solubility of CaSiO3 varies between 0.175 and 13.485 wt% and increases systematically with both temperature and pressure up to 3.0 GPa. Above 3.0 GPa wollastonite-I reacts rapidly to the high-pressure modification wollastonite-II. No obvious trends are evident in the solubility of wollastonite-II, with values between 1.93 and 10.61 wt%. The systematics of wollastonite-I solubility can be described well by a composite polynomial expression that leads to isothermal linear correlation with the density of water. The molality of dissolved wollastonite-I in pure water is then
log(mwoll)=2.2288-3418.23×T-1+671386.84×T-2+logρH2O×(5.4578+2359.11×T-1). 相似文献
3.
David Rickard 《Geochimica et cosmochimica acta》2006,70(23):5779-5789
The solubility of FeSm, synthetic nanoparticulate mackinawite, in aqueous solution was measured at 23 °C from pH 3-10 using an in situ precipitation and dissolution procedure and the solution species was investigated voltammetrically. The solubility is described by a pH-dependent reaction and a pH-independent reaction. The pH-dependent dissolution reaction can be described by
FeSm+2H+→Fe2++H2S 相似文献
4.
The ultraviolet spectra of dilute aqueous solutions of antimony (III) have been measured from 25 to 300 °C at the saturated vapour pressure. From these measurements, equilibrium constants were obtained for the following reactions:
H3SbO30 ? H+ + H2SbO3− 相似文献
5.
Aragonite was precipitated in the laboratory at 25 °C in isotopic equilibrium with Na-Ca-Mg-Cl-CO3 solutions at two different pH values (i.e., pH = ∼8.2 and ∼10.8) by the constant addition method. On the basis of the oxygen isotope composition of the aragonite precipitates, it was demonstrated that the equilibrium aragonite-water fractionation factor is independent of the pH of the parent solution and equal to:
1000lnα(aragonite-H2O)=29.12±0.09 相似文献
6.
The stability of yttrium-acetate (Y-Ac) complexes in aqueous solution was determined potentiometrically at temperatures 25-175 °C (at Ps) and pressures 1-1000 bar (at 25 and 75 °C). Measurements were performed using glass H+-selective electrodes in potentiometric cells with a liquid junction. The species YAc2+ and were found to dominate yttrium aqueous speciation in experimental solutions at 25-100 °C (log [Ac−] < −1.5, pH < 5.2), whereas at 125, 150 and 175 °C introduction of into the Y-Ac speciation model was necessary. The overall stability constants βn were determined for the reaction
7.
Nikolay N. Akinfiev 《Geochimica et cosmochimica acta》2009,73(6):1597-1608
Knowledge of the solubility of quartz over a broad spectrum of aqueous fluid compositions and T-P conditions is essential to our understanding of water-rock interaction in the Earth’s crust. We propose an equation to compute the molality of aqueous silica, mSiO2(aq), mol·(kg H2O)−1, in equilibrium with quartz and water-salt-CO2 fluids, as follows:
8.
Water is an important volatile component in andesitic eruptions and deep-seated andesitic magma chambers. We report an investigation of H2O speciation and diffusion by dehydrating haploandesitic melts containing ?2.5 wt.% water at 743-873 K and 100 MPa in cold-seal pressure vessels. FTIR microspectroscopy was utilized to measure species [molecular H2O (H2Om) and hydroxyl group (OH)] and total H2O (H2Ot) concentration profiles on the quenched glasses from the dehydration experiments. The equilibrium constant of the H2O speciation reaction H2Om+O?2OH, K = (XOH)2/(XH2OmXO) where X means mole fraction on a single oxygen basis, in this Fe-free andesite varies with temperature as ln K = 1.547-2453/T where T is in K. Comparison with previous speciation data on rhyolitic and dacitic melts indicates that, for a given water concentration, Fe-free andesitic melt contains more hydroxyl groups. Water diffusivity at the experimental conditions increases rapidly with H2O concentration, contrary to previous H2O diffusion data in an andesitic melt at 1608-1848 K. The diffusion profiles are consistent with the model that molecular H2O is the diffusion species. Based on the above speciation model, H2Om and H2Ot diffusivity (in m2/s) in haploandesite at 743-873 K, 100 MPa, and H2Ot ? 2.5 wt.% can be formulated as
9.
Forward dissolution rates of Na-Montmorillonite (Wyoming) SWy-2 smectite (Ca0.06Na0.56)[Al3.08Fe(III)0.38Mg0.54] [Si7.93 Al0.07]O20(OH)4 were measured at 25 °C in a mixed-flow reactor equipped with interior dialysis compartment (6-8 kDa membrane) as a function of pH (1-12), dissolved carbonate (0.5-10 mM), phosphate (10−5 to 0.03 M), and nine organic ligands (acetate, oxalate, citrate, EDTA, alginate, glucuronic acid, 3,4-dihydroxybenzoic acid, gluconate, and glucosamine) in the concentration range from 10−5 to 0.03 M. In organic-free solutions, the Si-based rates decrease with increasing pH at 1 ? pH ? 8 with a slope close to −0.2. At 9 ? pH ? 12, the Si-based rates increase with a slope of ∼0.3. In contrast, non-stoichiometric Mg release weakly depends on pH at 1 ? pH ? 12 and decreases with increasing pH. The empirical expression describing Si-release rates [R, mol/cm2/s] obtained in the present study at 25 °C, I = 0.01 M is given by
10.
This UV spectrophotometric study was aimed at providing precise, experimentally derived thermodynamic data for the ionisation of molybdic acid (H2MoO4) from 30 to 300 °C and at equilibrium saturated vapour pressures. The determination of the equilibrium constants and associated thermodynamic parameters were facilitated by spectrophotometric measurements using a specially designed high temperature optical Ti-Pd flow-through cell with silica glass windows.The following van’t Hoff isochore equations describe the temperature dependence of the first and second ionisation constants of molybdic acid up to 300 °C:
11.
Sebastien Kerisit Chongxuan Liu Eugene S. Ilton 《Geochimica et cosmochimica acta》2008,72(6):1481-1497
Molecular dynamics simulations of water in contact with the (0 0 1) and (0 1 0) surfaces of orthoclase (KAlSi3O8) were carried out to investigate the structure and dynamics of the feldspar-water interface, contrast the intrinsic structural properties of the two surfaces, and provide a basis for future work on the diffusion of ions and molecules in microscopic mineral fractures. Electron density profiles were computed from the molecular dynamics trajectories and compared with those derived experimentally from high-resolution X-ray reflectivity measurements by Fenter and co-workers [Fenter P., Cheng L., Park C., Zhang H. and Sturchio N. C. (2003a) Structure of the orthoclase (0 0 1)- and (0 1 0)-water interfaces by high-resolution X-ray reflectivity. Geochim. Cosmochim. Acta67, 4267-4275]. For each surface, three scenarios were considered whereby the interfacial species is potassium, water, or a hydronium ion. Excellent agreement was obtained for the (0 0 1) surface when potassium is the predominant interfacial species; however, some discrepancies in the position of the interfacial peaks were obtained for the (0 1 0) surface. The two surfaces showed similarities in the extent of water ordering at the interface, the activation energies for water and potassium desorption, and the adsorption localization of interfacial species. However, there are also important differences between the two surfaces in the coordination of a given adsorbed species, adsorption site densities, and the propensity for water molecules in surface cavities and those in the first hydration layer to coordinate to surface bridging oxygen atoms. These differences may have implications for the extent of dissolution in the low-pH regime since hydrolysis of Si(Al)OSi(Al) bonds is a major dissolution mechanism. 相似文献
12.
Ammoniojarosite [(NH4,H3O)Fe3(OH)6(SO4)2], a poorly soluble basic ferric sulfate, was produced by microbiological oxidation of ferrous sulfate at pH 2.0-3.0 over a range of concentrations (5.4-805 mM) and temperatures (22-65 °C). Ammoniojarosites were also produced by chemical (abiotic) procedures in parallel thermal (36-95 °C) experiments. At 36 °C, schwertmannite [ideally Fe8O8(OH)6(SO4)] was the only solid product formed at <10 mM concentrations. Between 11.5 and 85.4 mM , a mixed product of ammoniojarosite and schwertmannite precipitated, as identified by X-ray diffraction. In excess of 165 mM , ammoniojarosite was the only solid phase produced. An increase in the incubation temperature using thermoacidophiles at 45 and 65 °C accelerated the formation of ammoniojarosite in culture solutions containing 165 mM . Both the biogenic and chemical ammoniojarosites were yellow (2Y-4Y in Munsell hue), low surface area (<1 m2/g), well crystalline materials with average co and ao unit cell parameters of 17.467 ± 0.048 Å and 7.330 ± 0.006 Å, respectively. Strong positive correlations were observed between unit cell axial ratios (co/ao) and increasing synthesis temperature in both biotic and abiotic systems. All samples were N deficient compared to stoichiometric ammoniojarosite, and both chemical and X-ray data indicated partial replacement of by H3O+ to form solid solutions with 0.14-0.24 mole H3O+ per formula unit. The morphology of the biogenic jarosites included aggregated discs, pseudo-cubic crystals and botryoidal particles, whereas the chemical specimens prepared at 36-95 °C were composed of irregular crystals with angular edges. Morphological information may thus be useful to evaluate environmental parameters and mode of formation. The data may also have application in predicting phase boundary conditions for Fe(III) precipitation in biogeochemical processes and treatment systems involving acid sulfate waters. 相似文献
13.
It is widely recognised that a significant limitation to the ultimate precision of carbon stable isotope ratio measurements, as obtained from dual-inlet mass spectrometric measurements of CO2 isotopologue ion abundances at m/z 44, 45, and 46, is the correction for interference from 17O-bearing molecular ions. Two long-established, alternative procedures for determining the magnitude of this correction are in widespread use (although only one has IAEA approval); their differences lead to small but potentially significant discrepancies in the magnitude of the resulting correction. Furthermore, neither approach was designed to accommodate oxygen three-isotope distributions which do not conform to terrestrial mass-dependent behaviour. Stratospheric CO2, for example, contains a strongly ‘mass-independent’ oxygen isotope composition. A new strategy for determining the 17O-bearing ion correction is presented, for application where the oxygen three-isotope characteristics of the analyte CO2 are accurately known (or assigned) in terms of the slope λ of the three-isotope fractionation line and the ordinate axis intercept 103 ln(1 + k) on a 103 ln(1 + δ17O) versus 103 ln(1 + δ18O) plot. At the heart of the approach is the relationship between 17R, which is the 17O/16O ratio of the sample CO2, and other assigned or empirically determined parameters needed for the δ13C evaluation:
14.
Thomas Driesner 《Geochimica et cosmochimica acta》2007,71(20):4902-4919
A set of correlations for the volumetric properties and enthalpies of phases in the system H2O-NaCl as a function of temperature, pressure, and composition has been developed that yields accurate values from 0 to 1000 °C, 1 to 5000 bar, and 0 to 1 XNaCl. The volumetric properties of all fluid phases from low-density vapor to hydrous salt melts and single-phase binary fluids at high pressures and temperatures, can be described by a simple equation
15.
Several approximately 100-μm-wide reaction zones were grown under experimental conditions of 900 °C and 18 kbar along former olivine-plagioclase contacts in a natural gabbro. The reaction zone comprises two distinct domains: (i) an irregularly bounded zone with idiomorphic grains of zoisite and minor corundum and kyanite immersed in a melt developed at the plagioclase side and (ii) a well-defined reaction band comprising a succession of mineral layers forming a corona structure around olivine. Between the olivine and the plagioclase reactant phases we observe the following layer sequence: olivine|pyroxene|garnet|partially molten domain|plagioclase. Within the pyroxene layer two micro-structurally distinct layers comprising enstatite and clinopyroxene can be discerned. Chemical potential gradients persisted for the CaO, Al2O3, SiO2, MgO and FeO components, which drove diffusion of Ca, Al and Si bearing species from the garnet-matrix interface to the pyroxene-olivine interface and diffusion of Mg- and Fe-bearing species in the opposite direction. The systematic mineralogical organization and chemical zoning across the corona suggest that the olivine corona was formed by a “diffusion-controlled” reaction. We estimate a set of diffusion coefficients and conclude that LAlAl < LCaCa < (LSiSi, LFeFe) < LMgMg during reaction rim growth. 相似文献
16.
The steady state dissolution rate of San Carlos olivine [Mg1.82Fe0.18 SiO4] in dilute aqueous solutions was measured at 90, 120, and 150 °C and pH ranging from 2 to 12.5. Dissolution experiments were performed in a stirred flow-through reactor, under either a nitrogen or carbon dioxide atmosphere at pressures between 15 and 180 bar. Low pH values were achieved either by adding HCl to the solution or by pressurising the reactor with CO2, whereas high pH values were achieved by adding LiOH. Dissolution was stoichiometric for almost all experiments except for a brief start-up period. At all three temperatures, the dissolution rate decreases with increasing pH at acidic to neutral conditions with a slope of close to 0.5; by regressing all data for 2 ? pH ? 8.5 and 90 °C ? T ? 150 °C together, the following correlation for the dissolution rate in CO2-free solutions is obtained:
17.
K.U. Rempel A.E. Williams-Jones A.A. Migdisov 《Geochimica et cosmochimica acta》2008,72(13):3074-3083
The solubility and speciation of the assemblage MoO2-MoO3 in water vapour were investigated in experiments conducted at 350 °C, Ptotal from 59 to 160 bar and fHCl from 0 to 3.4 bar (0-2.0 mol%). Measured solubility at these conditions ranges from 22 to 2500 ppm (∑fMo from 4.4 × 10−4 to 6.5 × 10−2 bar). The concentration of Mo in the vapour at fHCl below 0.1 bar is similar to that in pure water vapour, but increases by two orders of magnitude at fHCl above 0.1 bar. The fugacity of gaseous Mo species is independent of chloride concentration at fHCl below 0.1 bar, but increases with increasing fHCl above this pressure. The dominant Mo species at fHCl below 0.1 bar is interpreted to be the same as it is in pure water vapour, and to form as a result of the reaction
(A1) 相似文献
18.
E. Bruce Watson Daniele J. Cherniak Elizabeth A. Frank 《Geochimica et cosmochimica acta》2009,73(16):4792-5705
Self-diffusion of sulfur in pyrite (FeS2) was characterized over the temperature range ∼500-725 °C (∼1 bar pressure) by immersing natural specimens in a bath of molten elemental 34S and characterizing the resulting diffusive-exchange profiles by Rutherford backscattering spectroscopy (RBS). The temperature dependence of the sulfur diffusivity (DS) conforms to DS = Do exp(−Ea/RT), where the pre-exponential constant (Do) and the activation energy (Ea) are constrained as follows:
19.
Werner Ertel Michael J. Walter Paul J. Sylvester 《Geochimica et cosmochimica acta》2006,70(10):2591-2602
We determined the solubility limit of Pt in molten haplo-basalt (1 atm anorthite-diopside eutectic composition) in piston-cylinder and multi-anvil experiments at pressures between 0.5 and 14 GPa and temperatures from 1698 to 2223 K. Experiments were internally buffered at ∼IW + 1. Pt concentrations in quenched-glass samples were measured by laser-ablation inductively coupled-plasma mass spectrometry (LA-ICPMS). This technique allows detection of small-scale heterogeneities in the run products while supplying three-dimensional information about the distribution of Pt in the glass samples. Analytical variations in 195Pt indicate that all experiments contain Pt nanonuggets after quenching. Averages of multiple, time-integrated spot analyses (corresponding to bulk analyses) typically have large standard deviations, and calculated Pt solubilities in silicate melt exhibit no statistically significant covariance with temperature or pressure. In contrast, averages of minimum 195Pt signal levels show less inter-spot variation, and solubility shows significant covariance with pressure and temperature. We interpret these results to mean that nanonuggets are not quench particles, that is, they were not dissolved in the silicate melt, but were part of the equilibrium metal assemblage at run conditions. We assume that the average of minimum measured Pt abundances in multiple probe spots is representative of the actual solubility. The metal/silicate partition coefficients (Dmet/sil) is the inverse of solubility, and we parameterize Dmet/sil in the data set by multivariate regression. The statistically robust regression shows that increasing both pressure and temperature causes Dmet/silto decrease, that is, Pt becomes more soluble in silicate melt. Dmet/sil decreases by less than an order of magnitude at constant temperature from 1 to 14 GPa, whereas isobaric increase in temperature produces a more dramatic effect, with Dmet/sil decreasing by more than one order of magnitude between 1623 and 2223 K. The Pt abundance in the Earth’s mantle requires that Dmet/sil is ∼1000 assuming core-mantle equilibration. Geochemical models for core formation in Earth based on moderately and slightly siderophile elements are generally consistent with equilibrium metal segregation at conditions generally in the range of 20-60 GPa and 2000-4000 K. Model extrapolations to these conditions show that the Pt abundance of the mantle can only be matched if oxygen fugacity is high (∼IW) and if Pt mixes ideally in molten iron, both very unlikely conditions. For more realistic values of oxygen fugacity (∼IW − 2) and experimentally-based constraints on non-ideal mixing, models show that Dmet/sil would be several orders of magnitude too high even at the most favorable conditions of pressure and temperature. These results suggest that the mantle Pt budget, and by implication other highly siderophile elements, was added by late addition of a ‘late veneer’ phase to the accreting proto-Earth. 相似文献
20.
Claire Chaïrat Jacques Schott Jean-Eric Lartigue 《Geochimica et cosmochimica acta》2007,71(24):5901-5912
The dissolution rates of natural fluorapatite (FAP), Ca10(PO4)6F2, were measured at 25 °C in mixed-flow reactors as a function of pH from 3.0 to 11.7, and aqueous calcium, phosphorus, and fluoride concentration. After an initial preferential Ca and/or F release, stoichiometric Ca, P, and F release was observed. Measured FAP dissolution rates decrease with increasing pH at 3 ? pH ? 7, FAP dissolution rates are pH independent at 7 ? pH ? 10, and FAP dissolution rates again decrease with increasing pH at pH ? 10. Measured FAP dissolution rates are independent of aqueous Ca, P, and F concentration at pH ≈ 3 and pH ≈ 10.Apatite dissolution appears to be initiated by the relatively rapid removal from the near surface of F and the Ca located in the M1 sites, via proton for Ca exchange reactions. Dissolution rates are controlled by the destruction of this F and Ca depleted surface layer. The destruction of this layer is facilitated by the adsorption/penetration of protons into the surface at acidic conditions, and by surface hydration at neutral and basic conditions. Taking into account these two parallel mechanisms, measured fluorapatite forward dissolution rates can be accurately described using