首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Do organic ligands affect calcite dissolution rates?   总被引：1，自引：0，他引：1  
Steady state Iceland-spar calcite dissolution rates were measured at 25 °C in aqueous solutions containing 0.1 M NaCl and up to 0.05 M dissolved bicarbonate at pH from 7.9 to 9.1 in the presence of 13 distinct dissolved organic ligands in mixed-flow reactors. The organic ligands considered in this study include those most likely to be present in either (1) aquifers at the conditions pertinent to CO2 sequestration or (2) soil/early diagenetic environments: acetate, phthalate, citrate, EDTA4−, succinate, d-glucosaminate, l-glutamate, d-gluconate, 2,4-dihydroxybenzoate, 3,4-dihydroxybenzoate, fumarate, malonate, and gallate. Results show that the presence of <0.05 mol/kg of these organic anions changes calcite dissolution rates by less than a factor of 2.5 with the exception of citrate and EDTA4−. The presence of 0.05 mol/kg citrate and EDTA4− increases calcite dissolution rates by as much as a factor of 35 and 500, respectively, compared to rates in organic anion-free solutions. Further calcite dissolution experiments were performed in the presence of organic polymers similar to bacterial exudates, cell exopolysaccharides, and analogs of microbial cell envelopes: alginate, lichen extract, humic acid, pectin, and gum xanthan. In no case did the presence of <100 ppm of these organics change calcite dissolution rates by more than a factor of 2.5. Results obtained in this study suggest that the presence of aqueous organic anions negligibly affects calcite forward dissolution rates in most natural environments. Some effect on calcite reactivity may be observed, however, by the presence of organic anions if they change substantially the chemical affinity of the fluid with respect to calcite.  相似文献   

2.
Ferrihydrite (Fh) coprecipitated with exopolymers of plants and microbes may differ in its geochemical reactivity from its abiotic counterpart. We synthesized Fh in the presence and absence of acid polysaccharides (polygalacturonic acid (PGA), alginate, xanthan) and characterized the physical and structural properties of the precipitates formed [Mikutta C., Mikutta R., Bonneville S., Wagner F., Voegelin A., Christl I. and Kretzschmar R. (2008) Synthetic coprecipitates of exopolysaccharides and ferrihydrite. Part I: Characterization. Geochim. Cosmochim. Acta]. In this paper, we focus on the reactivity of PGA and alginate coprecipitates and pure Fh, and studied their interaction with the microbial siderophore desferrioxamine B (DFOB) in the presence and absence of low molecular weight organic (LMWO) acid anions (malate, citrate). Batch adsorption and dissolution experiments were performed in the dark at pH 7 in 10 mM NaClO4 background electrolyte. In the dissolution experiments, different modes of ligand addition were applied (single, simultaneous, stepwise). With an estimated Langmuir sorption maximum of 15 mmol/mol Fe, a PGA coprecipitate with 11% Corg sorbed about four times as much DFOB as pure Fh, and the amount of DFOB sorbed was ∼4-fold larger than estimated from the sum of DFOB sorption to pure Fh and PGA alone. The apparent initial dissolution rates, Rapp-initial, and pseudo-first order rate coefficients, k, of the coprecipitates exceeded those of pure Fh by up to two orders of magnitude. Citrate and malate exerted a strong synergistic effect on the DFOB-promoted dissolution of pure Fh, whereas synergistic effects of both anions were absent or negligible for the coprecipitates. Rapp-initial of the citrate and DFOB-promoted dissolution of PGA coprecipitates increased with increasing molar C/Fe ratio of the coprecipitates, independent of the charge of the LMWO ligand. Our results indicate that polyuronates stabilize Fh particles sterically and /or electrostatically, thus increasing the mineral surface area accessible to LMWO ligands. In contrast, pure Fh was coagulated at pH 7 (pHiep of Fh = 7.1), and hence only a small fraction of the Fh surface underwent dissolution. The increase in ligand-accessible surface area of Fh upon coprecipitation with acid polysaccharides seems to primarily control the kinetics of the ligand-promoted dissolution at neutral pH. In pH environments where the solubility of Fe(III) is very low, dissolution rates of Fe(III) (hydr)oxides in such coprecipitates may therefore exceed those of pure minerals by several orders of magnitude, despite a similar crystallinity of the minerals.  相似文献   

3.
Partitioning of Ni in calcite, CaCO3, was evaluated with the aim of collecting data on partition and distribution coefficients and to enhance understanding about the interaction of Ni with the calcite surface and further incorporation into the bulk. This information will aid in the interpretation of geological processes for safety assessment of waste repositories and contamination of groundwater. Coprecipitation experiments were carried out by the constant addition method at 25 °C and pCO2 = 1 and 10−3.5 atm. Ni was moderately partitioned from solution into calcite. For dilute solid solutions (XNi < 0.001), Ni partition coefficients were estimated to be ∼1 and found to be weakly dependent on calcite precipitation rate in the range of 3-230 nmol m−2 s−1. Ni molar fraction in the solid is directly proportional to Ni concentration in the solution. The fit of the data to such a model is good evidence that Ni is taken up as a true solid solution, not simply by physical trapping.  相似文献   

4.
Partitioning of strontium during spontaneous calcite formation was experimentally studied using an advanced CO2-diffusion technique. Results at different precipitation rates and T = 5, 25, and 40 °C show that at constant temperature Sr incorporation into calcite is controlled by the precipitation rate (R in μmol/m2/h) according to the individual expressions
  相似文献   

5.
The direct aqueous carbonation of fibrous tremolite was investigated by TEM, powder XRD, and FT-IR to elucidate the transformation mechanism of tremolite into calcite. The TEM study revealed that tremolite dissolves along the weak cleavage on (1 0 0) and (1 1 0) and the cleavage fragment fibers. The preferential release of Ca, relative to Si or Mg, into the solution resulted in the crystallization of compositionally homogeneous calcite and in the concurrent formation of proto-saponite. X-ray diffraction analysis revealed that the amount of product calcite increased rapidly within 15 min. Subsequently, after a 5 h carbonation period, it increased slowly to about 60%. The product calcite is euhedral. In contrast, the unreacted tremolite grains retain the original crystal structure even after prolonged carbonation. The morphological modification of tremolite from fibrous to round may have important implications for the elimination of its toxicity.  相似文献   

6.
The chemical and isotopic composition of speleothem calcite and particularly that of stalagmites and flowstones is increasingly exploited as an archive of past environmental change in continental settings. Despite intensive research, including modelling and novel approaches, speleothem data remain difficult to interpret. A possible way foreword is to apply a multi-proxy approach including non-conventional isotope systems. For the first time, we here present a complete analytical dataset of magnesium isotopes (δ26Mg) from a monitored cave in NW Germany (Bunker Cave). The data set includes δ26Mg values of loess-derived soil above the cave (−1.0 ± 0.5‰), soil water (−1.2 ± 0.5‰), the carbonate hostrock (−3.8 ± 0.5‰), dripwater in the cave (−1.8 ± 0.2‰), speleothem low-Mg calcite (stalactites, stalagmites; −4.3 ± 0.6‰), cave loam (−0.6 ± 0.1‰) and runoff water (−1.8 ± 0.1‰) in the cave, respectively. Magnesium-isotope fractionation processes during weathering and interaction between soil cover, hostrock and solute-bearing soil water are non-trivial and depend on a number of variables including solution residence times, dissolution rates, adsorption effects and potential neo-formation of solids in the regolith and the carbonate aquifer. Apparent Mg-isotope fractionation between dripwater and speleothem low-Mg calcite is about 1000lnαMg-cc-Mg(aq) = −2.4‰. A similar Mg-isotope fractionation (1000lnαMg-cc-Mg(aq) ≈ −2.1‰) is obtained by abiogenic precipitation experiments carried out at aqueous Mg/Ca ratios and temperatures close to cave conditions. Accordingly, 26Mg discrimination during low-Mg calcite formation in caves is highly related to inorganic fractionation effects, which may comprise dehydration of Mg2+ prior to incorporation into calcite, surface entrapment of light isotopes and reaction kinetics. Relevance of kinetics is supported by a significant negative correlation of Mg-isotope fractionation with the precipitation rate for inorganic precipitation experiments.  相似文献   

7.
In this study, microscopic and spectroscopic techniques (scanning electron microscopy coupled with energy-dispersive X-ray analysis, Raman microspectroscopy, micro X-ray fluorescence spectroscopy, micro X-ray fine structure adsorption spectroscopy, and micro laser-induced breakdown spectroscopy) were combined to decipher the chemical and mineralogical properties of a saturated Fe–clay interface reacted at 90 °C and 50 bar for 8 months. The results collectively confirm the presence of a corrosion layer and a clay transformation layer. The corrosion layer is made of a magnetite-containing internal sublayer and a Fe-phyllosilicate external sublayer enriched in Na, with traces of goethite presumably resulting from sample reaction with air. The clay transformation layer is made of predominantly Ca-rich siderite (FeCO3). It is depleted in Al and K, suggesting dissolution of rock-forming minerals. The corroded thickness determined from the amount of Fe in corrosion and transformation layers and assuming zero porosity equals 19 ± 9 μm. These data indicate that the interfacial clay was transformed by dissolution of calcite and clay minerals and precipitation of siderite close to the original surface. Silica released upon clay dissolution diffused into the corrosion layer and coprecipitated with oxidized Fe to form Fe-phyllosilicate.  相似文献   

8.
In order to characterize and quantify the substitution of Ca(II) by Cm(III) (coordination, charge compensation), homogeneous Cm(III) coprecipitated calcite was synthesized in a mixed-flow-through experiment. Two sets of experiments were conducted at pH 8.1 and at pH 12.5.At pH 8.1 two calcites, a calcite with a low Cm3+ concentration (LCMpH8.1) and a calcite with a high M3+ (Gd3+ and Cm3+) concentration (HCMpH8.1) were grown and investigated by time resolved laser fluorescence spectroscopy. The Cm(III) emission spectra of LCMpH8.1 and HCMpH8.1 show the same Cm(III) fluorescence signals for two Cm(III) species; Cm(III) species (1) with a peak maximum at 606.2 nm and Cm(III) species (2) with a peak maximum at 620.3 nm. Cm(III) species (1) has a mean lifetime of τ = 386 ± 40 μs and Cm(III) species (2) has a mean lifetime of τ = 1874 ± 200 μs. A lifetime of 386 μs correlates with 1.3 water molecule in the first coordination sphere of the Cm ion whereas a lifetime of 1874 μs indicates the total loss of the Cm(III) hydration sphere. According to the fluorescence emission peak position and the fluorescence emission lifetime, Cm(III) species (1) is identified as a surface sorbed species whereas Cm(III) species (2) is identified as a Cm(III) incorporated into the calcite lattice.Cm(III) fluorescence emission spectra of Cm(III) doped calcite grown at pH 12.5 (LCMpH12.5) show the same peak maxima which are found for LCMpH8.1 and HCMpH8.1 grown at pH 8.1 but an additional emission band at 608.2 nm (3) is found, which can be assigned to a further Cm(III) species. Fluorescence emission lifetime measurements show that this Cm(III) species (3) has a lifetime of τ = 477 ± 25 μs, which correlates with 0.9 water molecules in the first coordination sphere. Cm(III) species (3) is suggested to be a CmOH2+ incorporated species.  相似文献   

9.
Ca isotope fractionation during inorganic calcite formation was experimentally studied by spontaneous precipitation at various precipitation rates (1.8 < log R < 4.4 μmol/m2/h) and temperatures (5, 25, and 40 °C) with traces of Sr using the CO2 diffusion technique.Results show that in analogy to Sr/Ca [see Tang J., Köhler S. J. and Dietzel M. (2008) Sr2+/Ca2+ and 44Ca/40Ca fractionation during inorganic calcite formation: I. Sr incorporation. Geochim. Cosmochim. Acta] the 44Ca/40Ca fractionation during calcite formation can be followed by the Surface Entrapment Model (SEMO). According to the SEMO calculations at isotopic equilibrium no fractionation occurs (i.e., the fractionation coefficient αcalcite-aq = (44Ca/40Ca)s/(44Ca/40Ca)aq = 1 and Δ44/40Cacalcite-aq = 0‰), whereas at disequilibrium 44Ca is fractionated in a primary surface layer (i.e., the surface entrapment factor of 44Ca, F44Ca < 1). As a crystal grows at disequilibrium, the surface-depleted 44Ca is entrapped into the newly formed crystal lattice. 44Ca depletion in calcite can be counteracted by ion diffusion within the surface region. Our experimental results show elevated 44Ca fractionation in calcite grown at high precipitation rates due to limited time for Ca isotope re-equilibration by ion diffusion. Elevated temperature results in an increase of 44Ca ion diffusion and less 44Ca fractionation in the surface region. Thus, it is predicted from the SEMO that an increase in temperature results in less 44Ca fractionation and the impact of precipitation rate on 44Ca fractionation is reduced.A highly significant positive linear relationship between absolute 44Ca/40Ca fractionation and the apparent Sr distribution coefficient during calcite formation according to the equation
Δ44/40Cacalcite-aq=(−1.90±0.26)·logDSr−2.83±0.28  相似文献   

10.
In oxic environments contaminated with arsenate (As(V)), small polyhydroxycarboxylates such as citrate may impact the structure of precipitating ferrihydrite (Fh) and thus the surface speciation of As(V). In this study, ‘2-line’ Fh was precipitated from ferric nitrate solutions that were neutralized to pH 6.5 in the presence of increasing citrate concentrations and in the absence or presence of As(V). The initial citrate/Fe and As/Fe ratios were 0-50 mol% and 5 mol%, respectively. The reaction products, enriched with up to 0.32 mol citrate per mole Fe, were characterized by X-ray diffraction, transmission electron microscopy, and Fe and As K-edge X-ray absorption spectroscopy. Citrate decreased the particle size of Fh by impairing the polymerization of Fe(O,OH)6 octahedra via edge and corner linkages. In the presence of citrate and As(V), coordination numbers of Fe decreased by up to 28% relative to pure Fh. Citrate significantly reduced the static disorder of Fe-O bonds, implying a decreased octahedral distortion in Fh. Mean bond distances in Fh were not affected by citrate and remained constant within error at 1.98 Å for Fe-O, 3.03 Å for Fe-Fe1, and 3.45 Å for Fe-Fe2. Likewise, citrate had no effect on the As-Fe (3.31 Å) bond distance in As(V) coprecipitated with Fh. The As K-edge EXAFS data comply with the formation of (i) only monodentate binuclear (2C) As(V) surface complexes and (ii) combinations of 2C, monodentate mononuclear (1V), and outersphere As(V) surface complexes. Our results suggest that increasing citrate concentrations led to a decreasing 1V/2C ratio and/or that citrate increasingly impaired the formation of outersphere As(V) complexes. Moreover, citrate stabilized colloidal suspensions of Fh (pH 4.3-6.6, I ∼0.45 M) and reduced Fh formation at the expense of soluble Fe(III)-citrate complexes. At initial citrate/Fe ratios ?25 mol%, between 8% and 41% of total Fe was bound in Fe(III)-citrate complexes after Fh formation. Polynuclear Fe(III)-citrate species were found to bind As(V) via surface complexes indistinguishable by EXAFS from those of As(V) adsorbed to or coprecipitated with Fh. Our study implies that low molecular weight polyhydroxycarboxylates may enhance the mobility of As(V) in aqueous systems of high ionic strength (e.g., neutralizing acid mine drainage) by colloidal stabilization of suspended Fh particles and the formation of ternary As(V) complexes.  相似文献   

11.
The kinetics of calcite precipitation in the presence of alginate was investigated using the constant composition technique. In the concentration range investigated (0.0002-0.005 g L−1), alginate inhibits calcite precipitation. The extent of inhibition increased with increased alginate concentration and decreased solution supersaturation. Alginate adsorption, derived from normalized calcite precipitation rates, is described satisfactorily by the Langmuir adsorption model. At lowest supersaturation, alginate adsorption onto calcite probably reaches its maximal uptake of 7.5E-4 g m−2, corresponding to surface coverage of one molecule for each 200-300 nm2, depending on the molecular mass of alginate. This means that one alginate molecule can be bound over 100-150 Ca surface sites. Initially, on the surface of the inhibited calcite, XPS identified alginate but after further time in solution, when the system had recovered, XPS demonstrated that it disappeared from the surface, presumably buried under the newly formed calcite. The alginate affinity constant decreases with increasing supersaturation, evidence for incomplete adsorption. A simple model based on competition between growth and desorption effectively describes the observed change in the adsorption constant.  相似文献   

12.
Batch uptake experiments and X-ray element mapping and spectroscopic techniques were used to investigate As(V) (arsenate) uptake mechanisms by calcite, including adsorption and coprecipitation. Batch sorption experiments in calcite-equilibrated suspensions (pH 8.3; PCO2 = 10−3.5 atm) reveal rapid initial sorption to calcite, with sorption rate gradually decreasing with time as available sorption sites decrease. An As(V)-calcite sorption isotherm determined after 24 h equilibration exhibits Langmuir-like behavior up to As concentrations of 300 μM. Maximum distribution coefficient values (Kd), derived from a best fit to a Langmuir model, are ∼190 L kg−1.Calcite single crystals grown in the presence of As(V) show well-developed rhombohedral morphology with characteristic growth hillocks on surfaces at low As(V) concentrations (?5 μM), but habit modification is evident at As(V) concentrations ?30 μM in the form of macrostep development preferentially on the − vicinal surfaces of growth hillocks. Micro-X-ray fluorescence element mapping of surfaces shows preferential incorporation of As in the − vicinal faces relative to + vicinals. EXAFS fit results for both adsorption and coprecipitation samples confirm that As occurs in the 5+ oxidation state in tetrahedral coordination with oxygen, i.e., as arsenate. For adsorption samples, As(V) forms inner-sphere surface complexes via corner-sharing with Ca octahedra. As(V) coprecipitated with calcite substitutes in carbonate sites but with As off-centered, as indicated by two Ca shells, and with likely disruption of local structure. The results indicate that As(V) interacts strongly with the calcite surface, similar to often-cited analog phosphate, and uptake can occur via both adsorption and coprecipitation reactions. Therefore, calcite may be effective for partial removal of dissolved arsenate from aquatic and soil systems.  相似文献   

13.
Sorption and catalytic oxidation of Fe(II) at the surface of calcite   总被引：1，自引：0，他引：1  
The effect of sorption and coprecipitation of Fe(II) with calcite on the kinetics of Fe(II) oxidation was investigated. The interaction of Fe(II) with calcite was studied experimentally in the absence and presence of oxygen. The sorption of Fe(II) on calcite occurred in two distinguishable steps: (a) a rapid adsorption step (seconds-minutes) was followed by (b) a slower incorporation (hours-weeks). The incorporated Fe(II) could not be remobilized by a strong complexing agent (phenanthroline or ferrozine) but the dissolution of the outmost calcite layers with carbonic acid allowed its recovery. Based on results of the latter dissolution experiments, a stoichiometry of 0.4 mol% Fe:Ca and a mixed carbonate layer thickness of 25 nm (after 168 h equilibration) were estimated. Fe(II) sorption on calcite could be successfully described by a surface adsorption and precipitation model (Comans & Middelburg, GCA51 (1987), 2587) and surface complexation modeling (Van Cappellen et al., GCA57 (1993), 3505; Pokrovsky et al., Langmuir16 (2000), 2677). The surface complex model required the consideration of two adsorbed Fe(II) surface species, >CO3Fe+ and >CO3FeCO3H0. For the formation of the latter species, a stability constant is being suggested. The oxidation kinetics of Fe(II) in the presence of calcite depended on the equilibration time of aqueous Fe(II) with the mineral prior to the introduction of oxygen. If pre-equilibrated for >15 h, the oxidation kinetics was comparable to a calcite-free system (t1/2 = 145 ± 15 min). Conversely, if Fe(II) was added to an aerated calcite suspension, the rate of oxidation was higher than in the absence of calcite (t1/2 = 41 ± 1 min and t1/2 = 100 ± 15 min, respectively). This catalysis was due to the greater reactivity of the adsorbed Fe(II) species, >CO3FeCO3H0, for which the species specific rate constant was estimated.  相似文献   

14.
Calcium isotope fractionation in calcite and aragonite   总被引：1，自引：0，他引：1  
Calcium isotope fractionation was measured on skeletal aragonite and calcite from different marine biota and on inorganic calcite. Precipitation temperatures ranged from 0 to 28°C. Calcium isotope fractionation shows a temperature dependence in accordance with previous observations: 1000 · ln(αcc) = −1.4 + 0.021 · T (°C) for calcite and 1000 · ln(αar) = −1.9 + 0.017 · T (°C) for aragonite. Within uncertainty the temperature slopes are identical for the two polymorphs. However, at all temperatures calcium isotopes are more fractionated in aragonite than in calcite. The offset in δ44/40Ca is about 0.6‰. The underlying mechanism for this offset may be related to the different coordination numbers and bond strengths of the calcium ions in calcite and aragonite crystals, or to different Ca reaction behavior at the solid-liquid interface. Recently, the observed temperature dependence of the Ca isotope fractionation was explained quantitatively by the temperature control on precipitation rates of calcium carbonates in an experimental setting (Lemarchand et al., 2004). We show that this mechanism can in principle also be applied to CaCO3 precipitation in natural environments in normal marine settings. Following this model, Ca isotope fractionation in marine Ca carbonates is primarily controlled by precipitation rates. On the other hand the larger Ca isotope fractionation of aragonite compared to calcite can not be explained by different precipitation rates. The rate control model of Ca isotope fractionation predicts a strong dependence of the Ca isotopic composition of carbonates on ambient CO32− concentration. While this model is in general accordance with our observations in marine carbonates, cultured specimens of the planktic foraminifer Orbulina universa show no dependence of Ca-isotope fractionation on the ambient CO32− concentration. The latter observation implies that the carbonate chemistry in the calcifying vesicles of the foraminifer is independent from the ambient carbonate ion concentration of the surrounding water.  相似文献   

15.
The calcium isotopic compositions (δ44Ca) of 30 high-purity nannofossil ooze and chalk and 7 pore fluid samples from ODP Site 807A (Ontong Java Plateau) are used in conjunction with numerical models to determine the equilibrium calcium isotope fractionation factor (αs−f) between calcite and dissolved Ca2+ and the rates of post-depositional recrystallization in deep sea carbonate ooze. The value of αs−f at equilibrium in the marine sedimentary section is 1.0000 ± 0.0001, which is significantly different from the value (0.9987 ± 0.0002) found in laboratory experiments of calcite precipitation and in the formation of biogenic calcite in the surface ocean. We hypothesize that this fractionation factor is relevant to calcite precipitation in any system at equilibrium and that this equilibrium fractionation factor has implications for the mechanisms responsible for Ca isotope fractionation during calcite precipitation. We describe a steady state model that offers a unified framework for explaining Ca isotope fractionation across the observed precipitation rate range of ∼14 orders of magnitude. The model attributes Ca isotope fractionation to the relative balance between the attachment and detachment fluxes at the calcite crystal surface. This model represents our hypothesis for the mechanism responsible for isotope fractionation during calcite precipitation. The Ca isotope data provide evidence that the bulk rate of calcite recrystallization in freshly-deposited carbonate ooze is 30-40%/Myr, and decreases with age to about 2%/Myr in 2-3 million year old sediment. The recrystallization rates determined from Ca isotopes for Pleistocene sediments are higher than those previously inferred from pore fluid Sr concentration and are consistent with rates derived for Late Pleistocene siliciclastic sediments using uranium isotopes. Combining our results for the equilibrium fractionation factor and recrystallization rates, we evaluate the effect of diagenesis on the Ca isotopic composition of marine carbonates at Site 807A. Since calcite precipitation rates in the sedimentary column are many orders of magnitude slower than laboratory experiments and the pore fluids are only slightly oversaturated with respect to calcite, the isotopic composition of diagenetic calcite is likely to reflect equilibrium precipitation. Accordingly, diagenesis produces a maximum shift in δ44Ca of +0.15‰ for Site 807A sediments but will have a larger impact where sedimentation rates are low, seawater circulates through the sediment pile, or there are prolonged depositional hiatuses.  相似文献   

16.
A surface reaction kinetic model is developed for predicting Ca isotope fractionation and metal/Ca ratios of calcite as a function of rate of precipitation from aqueous solution. The model is based on the requirements for dynamic equilibrium; i.e. proximity to equilibrium conditions is determined by the ratio of the net precipitation rate (Rp) to the gross forward precipitation rate (Rf), for conditions where ionic transport to the growing crystal surface is not rate-limiting. The value of Rp has been experimentally measured under varying conditions, but the magnitude of Rf is not generally known, and may depend on several factors. It is posited that, for systems with no trace constituents that alter the surface chemistry, Rf can be estimated from the bulk far-from-equilibrium dissolution rate of calcite (Rb or kb), since at equilibrium Rf = Rb, and Rp = 0. Hence it can be inferred that Rf ≈ Rp + Rb. The dissolution rate of pure calcite is measureable and is known to be a function of temperature and pH. At given temperature and pH, equilibrium precipitation is approached when Rp (=Rf − Rb) ? Rb. For precipitation rates high enough that Rp ? Rb, both isotopic and trace element partitioning are controlled by the kinetics of ion attachment to the mineral surface, which tend to favor more rapid incorporation of the light isotopes of Ca and discriminate weakly between trace metals and Ca. With varying precipitation rate, a transition region between equilibrium and kinetic control occurs near Rp ≈ Rb for Ca isotopic fractionation. According to this model, Ca isotopic data can be used to estimate Rf for calcite precipitation. Mechanistic models for calcite precipitation indicate that the molecular exchange rate is not constant at constant T and pH, but rather is dependent also on solution saturation state and hence Rp. Allowing Rb to vary as , consistent with available precipitation rate studies, produces a better fit to some trace element and isotopic data than a model where Rb is constant. This model can account for most of the experimental data in the literature on the dependence of 44Ca/40Ca and metal/Ca fractionation in calcite as a function of precipitation rate and temperature, and also accounts for 18O/16O variations with some assumptions. The apparent temperature dependence of Ca isotope fractionation in calcite may stem from the dependence of Rb on temperature; there should be analogous pH dependence at pH < 6. The proposed model may be valuable for predicting the behavior of isotopic and trace element fractionation for a range of elements of interest in low-temperature aqueous geochemistry. The theory presented is based on measureable thermo-kinetic parameters in contrast to models that require hyper-fast diffusivity in near-surface layers of the solid.  相似文献   

17.
Calcium carbonate (CaCO3) is an important component of the near-surface environment. Understanding the nature of its precipitation is important for a variety of environmental processes, as well as for the geologic sequestration of anthropogenic carbon dioxide. Calcite is the most thermodynamically stable bulk polymorph, but energy crossovers may exist that could favor the precipitation of vaterite or aragonite with decreasing particle size. The purpose of this study is to determine the surface energy of calcite, which is the first step towards understanding the effect of particle size on thermodynamic stability in the calcium carbonate system. The enthalpies of five well-characterized calcite samples (four nanophase and one bulk) were measured by acid solution isothermal and water adsorption calorimetric techniques. From the calorimetric data, the surface energies of calcite were determined to be 1.48 ± 0.21 and 1.87 ± 0.16 J/m2 for hydrous and anhydrous surfaces. These values are similar to those measured for many oxides but larger than predicted from computational models for idealized calcite surfaces. The surfaces of synthetic CaCO3 particles contain a range of planes and defect structures, which may give rise to the difference between the experimental and modeled values.  相似文献   

18.
Iron(III) (hydr)oxides formed at extracellular biosurfaces or in the presence of exopolymeric substances of microbes and plants may significantly differ in their structural and physical properties from their inorganic counterparts. We synthesized ferrihydrite (Fh) in solutions containing acid polysaccharides [polygalacturonic acid (PGA), alginate, xanthan] and compared its properties with that of an abiotic reference by means of X-ray diffraction, transmission electron microscopy, gas adsorption (N2, CO2), X-ray absorption spectroscopy, 57Fe Mössbauer spectroscopy, and electrophoretic mobility measurements. The coprecipitates formed contained up to 37 wt% polymer. Two-line Fh was the dominant mineral phase in all precipitates. The efficacy of polymers to precipitate Fh at neutral pH was higher for polymers with more carboxyl C (PGA ∼ alginate > xanthan). Pure Fh had a specific surface area of 300 m2/g; coprecipitation of Fh with polymers reduced the detectable mineral surface area by up to 87%. Likewise, mineral micro- (<2 nm) and mesoporosity (2-10 nm) decreased by up to 85% with respect to pure Fh, indicative of a strong aggregation of Fh particles by polymers in freeze-dried state. C-1s STXM images showed the embedding of Fh particles in polymer matrices on the micrometer scale. Iron EXAFS spectroscopy revealed no significant changes in the local coordination of Fe(III) between pure Fh and Fh contained in PGA coprecipitates. 57Fe Mössbauer spectra of coprecipitates confirmed Fh as dominant mineral phase with a slightly reduced particle size and crystallinity of coprecipitate-Fh compared to pure Fh and/or a limited magnetic super-exchange between Fh particles in the coprecipitates due to magnetic dilution by the polysaccharides. The pHiep of pure Fh in 0.01 M NaClO4 was 7.1. In contrast, coprecipitates of PGA and alginate had a pHiep < 2. Considering the differences in specific surface area, porosity, and net charge between the coprecipitates and pure Fh, composites of exopolysaccharides and Fe(III) (hydr)oxides are expected to differ in their geochemical reactivity from pure Fe(III) (hydr)oxides, even if the minerals have a similar crystallinity.  相似文献   

19.
The Mg/Ca ratio of seawater has varied significantly throughout the Phanerozoic Eon, primarily as a function of the rate of ocean crust production. Specimens of the crustose coralline alga Neogoniolithon sp. were grown in artificial seawaters encompassing the range of Mg/Ca ratios shown to have existed throughout the Phanerozoic. Significantly, the coralline algae’s skeletal Mg/Ca ratio varied in lockstep with the Mg/Ca ratio of the artificial seawater. Specimens grown in seawater treatments formulated with identical Mg/Ca ratios but differing absolute concentrations of Mg and Ca exhibited no significant differences in skeletal Mg/Ca ratios, thereby emphasizing the importance of the ambient Mg/Ca ratio, and not the absolute concentration of Mg, in determining the Mg/Ca ratio of coralline algal calcite. Specimens grown in seawater of the lowest molar Mg/Ca ratio (mMg/Ca = 1.0) actually changed their skeletal mineralogy from high-Mg (skeletal mMg/Ca > 0.04) to low-Mg calcite (skeletal mMg/Ca < 0.04), suggesting that ancient calcitic red algae, which exhibit morphologies and modes of calcification comparable to Neogoniolithon sp., would have produced low-Mg calcite from the middle Cambrian to middle Mississippian and during the middle to Late Cretaceous, when oceanic mMg/Ca approached unity. By influencing the original Mg content of carbonate facies in which these algae have been ubiquitous, this condition has significant implications for the geochemistry and diagenesis of algal limestones throughout most of the Phanerozoic. The crustose coralline algae’s precipitation of high-Mg calcite from seawater that favors the abiotic precipitation of aragonite indicates that these algae dictate the precipitation of the calcitic polymorph of CaCO3. However, the algae’s nearly abiotic pattern of Mg fractionation in their skeletal calcite suggests that their biomineralogical control is limited to polymorph specification and is generally ineffectual in the regulation of skeletal Mg incorporation. Therefore, the Mg/Ca ratio of well-preserved fossils of crustose coralline algae, when corrected for the effect of seawater temperature, may be an archive of oceanic Mg/Ca throughout the Phanerozoic. Magnesium fractionation algorithms that model algal skeletal Mg/Ca as a function of seawater Mg/Ca and temperature are presented herein. The results of this study support the empirical fossil evidence that secular variation of oceanic Mg/Ca has caused the mineralogy and skeletal chemistry of many calcifying marine organisms to change significantly over geologic time.  相似文献   

20.
The isotopic composition of carbon and oxygen in a calcite precipitating CO2-H2O-CaCO3 solution is preserved in the calcite precipitated. For the interpretation of isotopic proxies from stalagmites knowledge of the evolution of δ13C and δ18O in the solution during precipitation is required. A system of differential equations is presented from which this evolution can be derived. Both, irreversible loss of carbon and oxygen from the solution with precipitation time τ and exchange of oxygen in the carbonates with the oxygen in the water with exchange time T are considered. For carbon, where no exchange is active, a modified equation of Rayleigh-distillation is found, which takes into account that precipitation stops at ceq, the saturation concentration of DIC with respect to calcite, and that ceq as well as the precipitation time τ is slightly different for the heavy and the light isotope. This, however, requires introducing a new parameter γ = (Aeq/Beq)/(A0/B0), which has to be determined experimentally. (Aeq/Beq) is the isotopic ratio for the heavy (A) and the light isotope (B) at both chemical and isotopic equilibrium and (A0/B0) is the initial isotopic ratio of the solution. In the case of oxygen, where exchange is present, the isotopic shifts are reduced with increasing values of the precipitation time τ. For τ ? T the solution stays in isotopic equilibrium with the oxygen in the water during the entire time in which precipitation is active. The isotopic ratios in a calcite precipitating solution R(t)/R0 = (1 + δ(t)/1000) for carbon are plotted versus those of oxygen. R0 is the isotopic ratio at time t = 0, when precipitation starts and δ(t) the isotopic shift in the solution after time t. These show positive correlations for the first 50% of calcite, which can precipitate. Their slopes increase with increasing values of τ and they closely resemble Hendy-tests performed along growth layers of stalagmites. Our results show that stalagmites, which grow by high supply of water with drip times less than 50 s, exhibit positive correlations between δ13C and δ18O along a growth layer. But in spite of this the isotopic composition of oxygen in the solution at the apex is in isotopic equilibrium with the oxygen in the water, and therefore also that of calcite deposited at the apex.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号