首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 37 毫秒
1.
Sorption of U(VI) to goethite is a fundamental control on the mobility of uranium in soil and groundwater. Here, we investigated the sorption of U on goethite using EXAFS spectroscopy, batch sorption experiments and DFT calculations of the energetics and structures of possible surface complexes. Based on EXAFS spectra, it has previously been proposed that U(VI), as the uranyl cation , sorbs to Fe oxide hydroxide phases by forming a bidentate edge-sharing (E2) surface complex, >Fe(OH)2UO2(H2O)n. Here, we argue that this complex alone cannot account for the sorption capacity of goethite (α-FeOOH). Moreover, we show that all of the EXAFS signal attributed to the E2 complex can be accounted for by multiple scattering. We propose that the dominant surface complex in CO2-free systems is a bidentate corner-sharing (C2) complex, (>FeOH)2UO2(H2O)3 which can form on the dominant {101} surface. However, in the presence of CO2, we find an enhancement of UO2 sorption at low pH and attribute this to a (>FeO)CO2UO2 ternary complex. With increasing pH, U(VI) desorbs by the formation of aqueous carbonate and hydroxyl complexes. However, this desorption is preceded by the formation of a second ternary surface complex (>FeOH)2UO2CO3. The three proposed surface complexes, (>FeOH)2UO2(H2O)3, >FeOCO2UO2, and (>FeOH)2UO2CO3 are consistent with EXAFS spectra. Using these complexes, we developed a surface complexation model for U on goethite with a 1-pK model for surface protonation, an extended Stern model for surface electrostatics and inclusion of all known UO2-OH-CO3 aqueous complexes in the current thermodynamic database. The model gives an excellent fit to our sorption experiments done in both ambient and reduced CO2 environments at surface loadings of 0.02-2.0 wt% U.  相似文献   

2.
The adsorption of uranyl (UO22+) on ferrihydrite has been evaluated with the charge distribution (CD) model for systems covering a very large range of conditions, i.e. pH, ionic strength, CO2 pressure, U(VI) concentration, and loading. Modeling suggests that uranyl forms bidentate inner sphere complexes at sites that do not react chemically with carbonate ions. Uranyl is bound by singly-coordinated surface groups present at particular edges of Fe-octahedra of ferrihydrite while another set of singly-coordinated surface groups may form double-corner bidentate complexes with carbonate ions. The uranyl surface speciation strongly changes in the presence of carbonate due to the specific adsorption of carbonate ions as well as the formation of ternary uranyl-carbonate surface complexes. Data analysis with the CD model suggests that a uranyl tris-carbonato surface complex, i.e. (UO2)(CO3)34−, is formed. This species is most abundant in systems with a high pH and carbonate concentration. This finding differs significantly from previous interpretations made in the literature. At high pH and low carbonate concentrations, as can be prepared in CO2-closed systems, the model suggests the additional presence of a ternary uranyl-monocarbonato complex. The binding mode (type A or type B complex) is uncertain. At high uranyl concentrations, uranyl polymerizes at the surface of ferrihydrite giving, for instance, tris-uranyl surface complexes with and without carbonate. The similarities and differences between U(VI) adsorption by goethite and ferrihydrite are discussed from a surface structural point of view.  相似文献   

3.
Sorption of U(VI) on Hanford fine sand (HFS) with varying Fe-oxide (especially ferrihydrite) contents showed that U(VI) sorption increased with the incremental addition of synthetic ferrihydrite into HFS, consistent with ferrihydrite being one of the most reactive U(VI) sorbents present in natural sediments. Surface complexation model (SCM) calculations for U(VI) sorption, using only U(VI) surface-reaction constants obtained from U(VI) sorption data on freshly synthesized ferrihydrite at different pHs, were similar to the measured U(VI) sorption results on pure synthetic ferrihydrite and on HFS with high contents of ferrihydrite (5 wt%) added. However, the SCM prediction using only U(VI) sorption reactions and constants for synthetic ferrihydrite overestimated U(VI) sorption on the natural HFS or HFS with addition of low amounts of added ferrihydrite (1 wt% added). Over-predicted U(VI) sorption was attributed to reduced reactivity of natural ferrihydrite present in Hanford Site sediments, compared to freshly prepared synthetic ferrihydrite. Even though the SCM general composite (GC) approach is considered to be a semi-quantitative estimation technique for contaminant sorption, which requires systematic experimental data on the sorbent–sorbate system being studied to obtain credible SCM parameters, the general composite SCM model was still found to be a useful technique for describing U(VI) sorption on natural sediments. Based on U(VI) batch sorption results, two simple U(VI) monodentate surface species, SO_UO2HCO3 and SO_UO2OH on ferrihydrite and phyllosillicate in HFS, respectively, can be successfully used to describe U(VI) sorption onto Hanford Site sediment contacting varying geochemical solutions.  相似文献   

4.
Uranium(VI), which is often elevated in granitoidic groundwaters, is known to adsorb strongly to Fe (hydr)oxides under certain conditions. This process can be used in water treatment to remove U(VI). To develop a consistent geochemical model for U(VI) adsorption to ferrihydrite, batch experiments were performed and previous data sets reviewed to optimize a set of surface complexation constants using the 3-plane CD-MUSIC model. To consider the effect of dissolved organic matter (DOM) on U(VI) speciation, new parameters for the Stockholm Humic Model (SHM) were optimized using previously published data. The model, which was constrained from available X-ray absorption fine structure (EXAFS) spectroscopy evidence, fitted the data well when the surface sites were divided into low- and high-affinity binding sites. Application of the model concept to other published data sets revealed differences in the reactivity of different ferrihydrites towards U(VI). Use of the optimized SHM parameters for U(VI)-DOM complexation showed that this process is important for U(VI) speciation at low pH. However in neutral to alkaline waters with substantial carbonate present, Ca–U–CO3 complexes predominate. The calibrated geochemical model was used to simulate U(VI) adsorption to ferrihydrite for a hypothetical groundwater in the presence of several competitive ions. The results showed that U(VI) adsorption was strong between pH 5 and 8. Also near the calcite saturation limit, where U(VI) adsorption was weakest according to the model, the adsorption percentage was predicted to be >80%. Hence U(VI) adsorption to ferrihydrite-containing sorbents may be used as a method to bring down U(VI) concentrations to acceptable levels in groundwater.  相似文献   

5.
Adsorption of Cu2+, Zn2+, Cd2+, and Pb2+ onto goethite is enhanced in the presence of sulfate. This effect, which has also been observed on ferrihydrite, is not predicted by the diffuse layer model (DLM) using adsorption constants derived from single sorbate systems. However, by including ternary surface complexes with the stoichiometry FeOHMSO4, where FeOH is a surface adsorption site and M2+ is a cation, the effect of SO42− on cation adsorption was accurately predicted for the range of cation, goethite and SO42− concentrations studied. While the DLM does not provide direct molecular scale insights into adsorption reactions there are several properties of ternary complexes that are evident from examining trends in their formation constants. There is a linear relationship between ternary complex formation constants and cation adsorption constants, which is consistent with previous spectroscopic evidence indicating ternary complexes involve cation binding to the oxide surface. Comparing the data from this work to previous studies on ferrihydrite suggests that ternary complex formation on ferrihydrite involves complexes with the same or similar structure as those observed on goethite. In addition, it is evident that ternary complex formation constants are larger where there is a stronger metal-ligand interaction. This is also consistent with spectroscopic studies of goethite-M2+-SO42− and phthalate systems showing surface species with metal-ligand bonding. Recommended values of ternary complex formation constants for use in SO4-rich environments, such as acid mine drainage, are presented.  相似文献   

6.
  相似文献   

7.
Natural ferrihydrites (Fh) often contain impurities such as aluminum, especially in acid mine drainage, and these impurities can potentially impact the chemical reactivity of Fh with respect to metal (loid) adsorption. In the present study, we have investigated the influence of aluminum on the sorption properties of ferrihydrite with respect to environmentally relevant aqueous arsenic species, arsenite and arsenate. We have conducted sorption experiments by reacting aqueous As(III) and As(V) with synthetic Al-free and Al-bearing ferrihydrite at pH 6.5. Our results reveal that, when increasing the Al:Fe molar ratio in Fh, the sorption density dramatically decreased for As(III), whereas it increased for As(V). Extended X-ray Absorption Fine Structure (EXAFS) spectroscopy analysis at the As K-edge indicated that the AsIIIO3 pyramid binds to FeO6 octahedra on both Al-free Fh and Al-bearing Fh, by forming bidentate mononuclear edge-sharing (2E) and bidentate binuclear corner-sharing (2C) surface complexes characterized by As–Fe distances of 2.9 Å and 3.4 Å, respectively. The decrease in As(III) sorption density with increasing Al:Fe ratio in Fh could thus be explained by a low affinity of the As(OH)3 molecule for Al surface sites compared to Fe ones. In contrast, on the basis of available literature on As(V) adsorption mechanisms, we suggest that, in addition to inner-sphere 2C arsenate surface complexes, outer-sphere arsenate surface complexes forming hydrogen bonds with both Al–OH and Fe–OH surface sites could explain the enhancement of As(V) sorption onto aluminous Fh relative to Al-free Fh, as observed in the present study. The presence of aluminum in Fh may thus enhance the mobility of arsenite with respect to arsenate in Acid Mine Drainage impacted systems, while mixed Al:Fe systems could present an alternative for arsenic removal from impacted waters, provided that As(III) would be oxidized to As(V).  相似文献   

8.
The fate and transport of uranium in contaminated soils and sediments may be affected by adsorption onto the surface of minerals such as montmorillonite. Extended X-ray absorption fine structure (EXAFS) spectroscopy has been used to investigate the adsorption of uranyl (UO22+) onto Wyoming montmorillonite. At low pH (∼4) and low ionic strength (10−3 M), uranyl has an EXAFS spectrum indistinguishable from the aqueous uranyl cation, indicating binding via cation exchange. At near-neutral pH (∼7) and high ionic strength (1 M), the equatorial oxygen shell of uranyl is split, indicating inner-sphere binding to edge sites. Linear-combination fitting of the spectra of samples reacted under conditions where both types of binding are possible reveals that cation exchange at low ionic strengths on SWy-2 may be more important than predicted by past surface complexation models of U(VI) adsorption on related montmorillonites. Analysis of the binding site on the edges of montmorillonite suggests that U(VI) sorbs preferentially to [Fe(O,OH)6] octahedral sites over [Al(O,OH)6] sites. When bound to edge sites, U(VI) occurs as uranyl-carbonato ternary surface complexes in systems equilibrated with atmospheric CO2. Polymeric surface complexes were not observed under any of the conditions studied. Current surface complexation models of uranyl sorption on clay minerals may need to be reevaluated to account for the possible increased importance of cation exchange reactions at low ionic strengths, the presence of reactive octahedral iron surface sites, and the formation of uranyl-carbonato ternary surface complexes. Considering the adsorption mechanisms observed in this study, future studies of U(VI) transport in the environment should consider how uranium retardation will be affected by changes in key solution parameters, such as pH, ionic strength, exchangeable cation composition, and the presence or absence of CO2.  相似文献   

9.
We measured the adsorption of Cu(II) onto kaolinite from pH 3-7 at constant ionic strength. EXAFS spectra show that Cu(II) adsorbs as (CuO4Hn)n−6 and binuclear (Cu2O6Hn)n−8 inner-sphere complexes on variable-charge ≡AlOH sites and as Cu2+ on ion exchangeable ≡X--H+ sites. Sorption isotherms and EXAFS spectra show that surface precipitates have not formed at least up to pH 6.5. Inner-sphere complexes are bound to the kaolinite surface by corner-sharing with two or three edge-sharing Al(O,OH)6 polyhedra. Our interpretation of the EXAFS data are supported by ab initio (density functional theory) geometries of analog clusters simulating Cu complexes on the {110} and {010} crystal edges and at the ditrigonal cavity sites on the {001}. Having identified the bidentate (≡AlOH)2Cu(OH)20, tridentate (≡Al3O(OH)2)Cu2(OH)30 and ≡X--Cu2+ surface complexes, the experimental copper(II) adsorption data can be fit to the reactions
  相似文献   

10.
Evaluation of the long-term health risks of uranium contamination in soils, sediments, and groundwater requires a fundamental understanding of the various processes affecting subsurface transport of uranium, including adsorption processes at mineral/water interfaces. In this study, the sites of binding and surface complexation of U(VI) adsorbed on the (11?02) surfaces of α-Al2O3 and α-Fe2O3 have been determined using crystal truncation rod (CTR) diffraction and grazing incidence extended X-ray absorption fine structure (GI-EXAFS) spectroscopy. The available binding sites on the (11?02) surfaces were constrained through bond valence and steric analyses. On both surfaces, U(VI) forms uranyl-carbonato ternary complexes to surface oxygens that are singly coordinated to aluminum or iron. On the α-Al2O3 (11?02) surface, a monodentate complex results, whereas on the α-Fe2O3 (11?02) surface, the binding is bidentate to adjacent singly coordinated oxygen sites (i.e., binuclear). Differences in protonation of the singly coordinated oxygen atoms, surface charging, U(VI) aqueous speciation, substrate structure, or the electronic structure of surface functional groups may be the cause of these differences in adsorption geometry. Both XPS and CTR diffraction reveal higher U(VI) surface coverages on the α-Fe2O3 (11?02) surface than on the α-Al2O3 (11?02) surface. This difference cannot be the result of differences in defect concentration alone as CTR diffraction is not sensitive to U(VI) sorbed to defect sites, implying that the α-Fe2O3 (11?02) surface has an intrinsically higher affinity for U(VI). The surface complexes observed in this study are different from the bidentate, mononuclear complexes typically derived for U(VI) on powdered aluminum- and iron-(oxyhydr)oxides and clay minerals using U LIII-edge EXAFS spectroscopy. However, the presence of monodentate, mononuclear and bidentate, binuclear complexes may have been overlooked in past EXAFS studies on such substrates, as these complexes have U-Al or U-Fe interatomic distances that are too large to be easily detected by EXAFS spectroscopy.  相似文献   

11.
The competitive adsorption of arsenate and arsenite with silicic acid at the ferrihydrite–water interface was investigated over a wide pH range using batch sorption experiments, attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, extended X-ray absorption fine structure (EXAFS) spectroscopy, and density functional theory (DFT) modeling. Batch sorption results indicate that the adsorption of arsenate and arsenite on the 6-L ferrihydrite surface exhibits a strong pH-dependence, and the effect of pH on arsenic sorption differs between arsenate and arsenite. Arsenate adsorption decreases consistently with increasing pH; whereas arsenite adsorption initially increases with pH to a sorption maximum at pH 7–9, where after sorption decreases with further increases in pH. Results indicate that competitive adsorption between silicic acid and arsenate is negligible under the experimental conditions; whereas strong competitive adsorption was observed between silicic acid and arsenite, particularly at low and high pH. In situ, flow-through ATR-FTIR data reveal that in the absence of silicic acid, arsenate forms inner-sphere, binuclear bidentate, complexes at the ferrihydrite surface across the entire pH range. Silicic acid also forms inner-sphere complexes at ferrihydrite surfaces throughout the entire pH range probed by this study (pH 2.8–9.0). The ATR-FTIR data also reveal that silicic acid undergoes polymerization at the ferrihydrite surface under the environmentally-relevant concentrations studied (e.g., 1.0 mM). According to ATR-FTIR data, arsenate complexation mode was not affected by the presence of silicic acid. EXAFS analyses and DFT modeling confirmed that arsenate tetrahedra were bonded to Fe metal centers via binuclear bidentate complexation with average As(V)-Fe bond distance of 3.27 Å. The EXAFS data indicate that arsenite forms both mononuclear bidentate and binuclear bidentate complexes with 6-L ferrihydrite as indicated by two As(III)–Fe bond distances of ∼2.92–2.94 and 3.41–3.44 Å, respectively. The As–Fe bond distances in both arsenate and arsenite EXAFS spectra remained unchanged in the presence of Si, suggesting that whereas Si diminishes arsenite adsorption preferentially, it has a negligible effect on As–Fe bonding mechanisms.  相似文献   

12.
The Fe(II) adsorption by non-ferric and ferric (hydr)oxides has been analyzed with surface complexation modeling. The CD model has been used to derive the interfacial distribution of charge. The fitted CD coefficients have been linked to the mechanism of adsorption. The Fe(II) adsorption is discussed for TiO2, γ-AlOOH (boehmite), γ-FeOOH (lepidocrocite), α-FeOOH (goethite) and HFO (ferrihydrite) in relation to the surface structure and surface sites. One type of surface complex is formed at TiO2 and γ-AlOOH, i.e. a surface-coordinated Fe2+ ion. At the TiO2 (Degussa) surface, the Fe2+ ion is probably bound as a quattro-dentate surface complex. The CD value of Fe2+ adsorbed to γ-AlOOH points to the formation of a tridentate complex, which might be a double edge surface complex. The adsorption of Fe(II) to ferric (hydr)oxides differs. The charge distribution points to the transfer of electron charge from the adsorbed Fe(II) to the solid and the subsequent hydrolysis of the ligands that coordinate to the adsorbed ion, formerly present as Fe(II). Analysis shows that the hydrolysis corresponds to the hydrolysis of adsorbed Al(III) for γ-FeOOH and α-FeOOH. In both cases, an adsorbed M(III) is found in agreement with structural considerations. For lepidocrocite, the experimental data point to a process with a complete surface oxidation while for goethite and also HFO, data can be explained assuming a combination of Fe(II) adsorption with and without electron transfer. Surface oxidation (electron transfer), leading to adsorbed Fe(III)(OH)2, is favored at high pH (pH > ∼7.5) promoting the deprotonation of two FeIII-OH2 ligands. For goethite, the interaction of Fe(II) with As(III) and vice versa has been modeled too. To explain Fe(II)-As(III) dual-sorbate systems, formation of a ternary type of surface complex is included, which is supposed to be a monodentate As(III) surface complex that interacts with an Fe(II) ion, resulting in a binuclear bidentate As(III) surface complex.  相似文献   

13.
We measured the adsorption of V(V) onto goethite (α-FeOOH) under oxic (PO2 = 0.2 bar) atmospheric conditions. EXAFS spectra show that V(V) adsorbs by forming inner-sphere complexes as VO2(OH)2 and VO3(OH). We predicted the relative energies and geometries of VO2(O, OH)2-FeOOH surface complexes using ab initio calculations of the geometries and energetics of analogue Fe2(OH)2(H2O)6O2VO2(O, OH)2 clusters. The bidentate corner-sharing complex is predicted to be substantially (57 kJ/mol) favoured energetically over the hypothetical edge-sharing bidentate complex. Fitting the EXAFS spectra using multiple scattering shows that only the bidentate corner-sharing complex is present with Fe-V and V-O distances in good agreement with those predicted. We find it important to include multiple scattering in the fits of our EXAFS data otherwise spurious V-Fe distances near 2.8 Å result which may be incorrectly attributed to edge-sharing complexes. We find no evidence for monodentate complexes; this agrees with predicted high energies of such complexes. Having identified the Fe2O2V(OH)2+ and Fe2O2VO(OH)0 surface complexes, we are able to fit the experimental vanadium(V) adsorption data to the reactions
  相似文献   

14.
《Geochimica et cosmochimica acta》1999,63(19-20):2891-2901
A long-standing problem in aquatic geochemistry has been the incorporation of natural organic matter (NOM) into speciation models. The general effect of NOM on metal ion sorption by particles has been understood for some time, and significant progress has been made in elucidating some of the details of the role of NOM through the use of surrogate organic acids such as citric acid. However, a gap exists between the general observations that have been made of NOM behavior and the inclusion of NOM in surface chemical models for metal ion sorption. In this paper, we report on the results of a study on the sorption of U(VI) by hematite in the absence and presence of Suwannee river humic acid (HA) and over a range of other system conditions (e.g., pH, I). Essential HA characteristics (e.g., its acid/base, metal binding, and surface chemical properties) were “captured” by representing the HA as an assembly of monoprotic acids with assumed pK values and without explicit correction for electrostatic effects. The ternary system (hematite/HA/U(VI)) was simulated through the combination of the binary submodels (i.e., CO32−/hematite, U(VI)/HA, U(VI)/hematite, and HA/hematite) with model constants fixed at the values determined from simulations of the respective experimental systems. However, the “summed-binary” approach undersimulated experimental results, and the ternary system model required the postulation of two ternary surface (Type A) complexes composed of the uranyl ion, hematite surface sites, and the model ligands comprising the HA. Consideration of the HA in this manner permitted the simulation of HA effects on U(VI) sorption by hematite over a range of solution conditions using a general speciation model.  相似文献   

15.
Arsenic(V), as the arsenate (AsO4)3− ion and its conjugate acids, is strongly sorbed to iron(III) oxides (α-Fe2O3), oxide hydroxides (α-,γ-FeOOH) and poorly crystalline ferrihydrite (hydrous ferric oxide). The mechanism by which arsenate complexes with iron oxide hydroxide surfaces is not fully understood. There is clear evidence for inner sphere complexation but the nature of the surface complexes is controversial. Possible surface complexes between AsO4 tetrahedra and surface FeO6 polyhedra include bidentate corner-sharing (2C), bidentate edge-sharing (2E) and monodentate corner-sharing (1V). We predicted the relative energies and geometries of AsO4-FeOOH surface complexes using density functional theory calculations on analogue Fe2(OH)2(H2O)nAsO2(OH)23+ and Fe2(OH)2(H2O)nAsO4+ clusters. The bidentate corner-sharing complex is predicted to be substantially (55 kJ/mole) more favored energetically over the hypothetical edge-sharing bidentate complex. The monodentate corner-sharing (1V) complex is very unstable. We measured EXAFS spectra of 0.3 wt. % (AsO4)3− sorbed to hematite (α-Fe2O3), goethite(α-FeOOH), lepidocrocite(γ-FeOOH) and ferrihydrite and fit the EXAFS directly with multiple scattering. The phase-shift-corrected Fourier transforms of the EXAFS spectra show peaks near 2.85 and 3.26 Å that have been attributed by previous investigators to result from 2E and 2C complexes. However, we show that the peak near 2.85 Å appears to result from As-O-O-As multiple scattering and not from As-Fe backscatter. The observed 3.26 Å As-Fe distance agrees with that predicted for the bidentate corner-sharing surface (2C) complex. We find no evidence for monodentate (1V) complexes; this agrees with the predicted high energies of such complexes.  相似文献   

16.
“Two-line” ferrihydrite samples precipitated and then exposed to a range of aqueous Zn solutions (10−5 to 10−3 M), and also coprecipitated in similar Zn solutions (pH 6.5), have been examined by Zn and Fe K-edge X-ray absorption spectroscopy. Typical Zn complexes on the surface have Zn-O distances of 1.97(.02) Å and coordination numbers of about 4.0(0.5), consistent with tetrahedral oxygen coordination. This contrasts with Zn-O distances of 2.11(.02) Å and coordination numbers of 6 to 7 in the aqueous Zn solutions used in sample preparation. X-ray absorption extended fine structure spectroscopy (EXAFS) fits to the second shell of cation neighbors indicate as many as 4 Zn-Fe neighbors at 3.44(.04) Å in coprecipitated samples, and about two Zn-Fe neighbors at the same distance in adsorption samples. In both sets of samples, the fitted coordination number of second shell cations decreases as sorption density increases, indicating changes in the number and type of available complexing sites or the onset of competitive precipitation processes. Comparison of our results with the possible geometries for surface complexes and precipitates suggests that the Zn sorption complexes are inner sphere and at lowest adsorption densities are bidentate, sharing apical oxygens with adjacent edge-sharing Fe(O,OH)6 octahedra. Coprecipitation samples have complexes with similar geometry, but these are polydentate, sharing apices with more than two adjacent edge-sharing Fe(O,OH)6 polyhedra. The results are inconsistent with Zn entering the ferrihydrite structure (i.e., solid solution formation) or formation of other Zn-Fe precipitates. The fitted Zn-Fe coordination numbers drop with increasing Zn density with a minimum of about 0.8(.2) at Zn/(Zn + Fe) of 0.08 or more. This change appears to be attributable to the onset of precipitation of zinc hydroxide polymers with mainly tetrahedral Zn coordination. At the highest loadings studied, the nature of the complexes changes further, and a second type of precipitate forms. This has a structure based on a brucite layer topology, with mainly octahedral Zn coordination. Amorphous zinc hydroxide samples prepared for comparison had a closely similar local structure. Analysis of the Fe K-edge EXAFS is consistent with surface complexation reactions and surface precipitation at high Zn loadings with little or no Fe-Zn solid solution formation. The formation of Zn-containing precipitates at solution conditions two or more orders of magnitude below their solubility limit is compared with other sorption and spectroscopic studies that describe similar behavior.  相似文献   

17.
Feldspar minerals are thermodynamically unstable in the near-surface environment and their surfaces are well known to react readily with aqueous solutions, leading to incongruent dissolution at low pH values, but congruent dissolution at neutral and high pH values. Interactions with mineral surfaces are an important control on the environmental transport of trace elements and detrital feldspars are abundant in soils and sediments. However, the interactions of metal ions in solution with the reacting feldspar surface have not been widely explored. The interactions of Pb(II), U(VI) and Np(V) ions with the feldspar surface have therefore been studied. Lead is taken up by the microcline surface at pH 6 and 10, but no uptake could be measured at pH 2. There was measurable uptake of Pb(II) on the plagioclase surface at pH 2, 6 and 10. Uptake always increased with pH. In most conditions, Pb(II) reacts through cation exchange process although, at high pH, a discrete phase, probably hydrocerrusite, is observed by atomic force microscopy (AFM) to precipitate on the plagioclase surface. Supersaturation with hydrocerrusite in these conditions is expected from thermodynamic calculations. Uptake of uranyl ion , generally through surface complex formation, could only be measured at pH 6 and 10. At pH 6 and an initial U(VI) concentration above 21.0 μM, precipitation of becquerelite (Ca[(UO2)3O2(OH)3]2·8H2O), identified by AFM and characterised by grazing incidence X-ray diffraction and X-ray photoelectron spectroscopy, is observed on plagioclase. The U(VI) concentration range in which becquerelite precipitation begins (dissolved U(VI) 1-5 μM) is consistent with that predicted from thermodynamic modelling. On plagioclase feldspar, secondary ion mass spectrometry showed diffusion of uranium into the altered surface layer. Uptake of the neptunyl ion (Np(V)) was found at pH 6 and 10 for microcline and at pH 2, 6 and 10 for plagioclase, and was generally lower than uptake of U(VI). By combining batch sorption experiments with imaging and surface analysis, and thermodynamic modelling, it has been possible to gain a mechanistic insight into the reactions of the feldspar surface with metal ions in solution.  相似文献   

18.
Hexavalent uranium [U(VI)] dissolved in a modified lactate-C medium was treated under anoxic conditions with a mixture of an Fe(III)-(hydr)oxide mineral (hematite, goethite, or ferrihydrite) and quartz. The mass of Fe(III)-(hydr)oxide mineral was varied to give equivalent Fe(III)-mineral surface areas. After equilibration, the U(VI)-mineral suspensions were inoculated with sulfate-reducing bacteria, Desulfovibrio desulfuricans G20. Inoculation of the suspensions containing sulfate-limited medium yielded significant G20 growth, along with concomitant reduction of sulfate and U(VI) from solution. With lactate-limited medium, however, some of the uranium that had been removed from solution was resolubilized in the hematite treatments and, to a lesser extent, in the goethite treatments, once the lactate was depleted. No resolubilization was observed in the lactate-limited ferrihydrite treatment even after a prolonged incubation of 4 months. Uranium resolubilization was attributed to reoxidation of the uraninite by Fe(III) present in the (hydr)oxide phases. Analysis by U L3-edge XANES spectroscopy of mineral specimens sampled at the end of the experiments yielded spectra similar to that of uraninite, but having distinct features, notably a much more intense and slightly broader white line consistent with precipitation of nanometer-sized particles. The XANES spectra thus provided strong evidence for SRB-promoted removal of U(VI) from solution by reductive precipitation of uraninite. Consequently, our results suggest that SRB mediate reduction of soluble U(VI) to an insoluble U(IV) oxide, so long as a suitable electron donor is available. Depletion of the electron donor may result in partial reoxidation of the U(IV) to soluble U(VI) species when the surfaces of crystalline Fe(III)-(hydr)oxides are incompletely reduced.  相似文献   

19.
Fourier transformed infrared (FTIR) spectroscopy was used to characterize arsenate-ferrihydrite sorption solids synthesized at pH 3-8. The speciation of sorbed arsenate was determined based on the As-O stretching vibration bands located at 650-950 cm−1 and O-H stretching vibration bands at 3000-3500 cm−1. The positions of the As-O and O-H stretching vibration bands changed with pH indicating that the nature of surface arsenate species on ferrihydrite was strongly pH dependent. Sorption density and synthesis media (sulfate vs. nitrate) had no appreciable effect. At acidic pH (3, 4), ferric arsenate surface precipitate formed on ferrihydrite and constituted the predominant surface arsenate species. X-ray diffraction (XRD) analyses of he sorption solids synthesized at elevated temperature (75 °C), pH 3 clearly showed the development of crystalline ferric arsenate (i.e. scorodite). In neutral and alkaline media (pH 7, 8), arsenate sorbed as a bidentate surface complex (in both protonated FeO2As(O)(OH)− and unprotonated forms). For the sorption systems in slightly acidic media (pH 5, 6), both ferric arsenate and surface complex were probably present on ferrihydrite. It was further determined that the incorporated sulfate in ferrihydrite during synthesis was substituted by arsenate and was more easily exchangeable with increasing pH.  相似文献   

20.
The distribution of Mo between seawater and marine ferromanganese oxides has great impacts on concentration and isotopic composition of Mo in modern oxic seawater. To reveal the adsorption chemistry of Mo to ferromanganese oxides, we performed (i) detailed structural analyses of Mo surface complexes on δ-MnO2, ferrihydrite, and hydrogenetic ferromanganese oxides by L3- and K-edge XAFS, and (ii) adsorption experiments of Mo to δ-MnO2 and ferrihydrite over a wide range of pHs, ionic strengths, and Mo concentrations. XAFS analyses revealed that Mo forms distorted octahedral (Oh) inner-sphere complexes on δ-MnO2 whereas it forms a tetrahedral (Td) outer-sphere complex on ferrihydrite. In the hydrogenetic ferromanganese oxides, the dominant host phase of Mo was revealed to be δ-MnO2. These structural information are consistent with the macroscopic behaviors of Mo in adsorption experiments, and Mo concentration in modern oxic seawater can be explained by the equilibrium adsorption reaction on δ-MnO2. In addition, the large isotopic fractionation of Mo between seawater and ferromanganese oxides detected in previous studies can be explained by the structural difference between and adsorbed species on the δ-MnO2 phase in ferromanganese oxides. In contrast, smaller fractionation of Mo isotopes on ferrihydrite is due to little change in the Mo local structures during its adsorption to ferrihydrite.The structures of Mo species adsorbed on crystalline Fe (oxyhydr)oxides, goethite, and hematite were also investigated at pH 8 and I = 0.70 M (NaNO3). Our XAFS analyses revealed that Mo forms inner-sphere complexes on both minerals: Td edge-sharing (46%) and Oh double corner-sharing (54%) for goethite, and Td double corner-sharing (14%) and Oh edge-sharing (86%) for hematite. These structural information, combined with those for amorphous ferrihydrite and δ-MnO2, show the excellent correlation with the magnitude of adsorptive isotopic fractionation of Mo reported in previous studies: the proportion of Oh species or their magnitude of distortion in Mo surface complexes become larger in the order of ferrihydrite < goethite < hematite < δ-MnO2, a trend identical to the magnitude of isotopic fractionation.Based on the comparison with previous reports for Mo surface species on various oxides, the chemical factors that affect Mo surface complex structures were also discussed. The hydrolysis constant of cation in oxides, log KOH (or the acidity of the oxide surfaces, PZC) is well correlated with the mode of attachment (inner- or outer-sphere) of Mo surface complexes. Furthermore, the symmetric change in Mo species from Td to Oh is suggested to be driven by the formation of inner-sphere complexes on specific sites of the oxide surfaces.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号