共查询到20条相似文献，搜索用时 31 毫秒
1.
It is often necessary to locate the original quarry which supplied the stone for a particular historical building. This stones could be used for future restoration work and for testing in the laboratory (artificial aging tests, physical properties determination, control of the efficacy of conservation treatments, etc.). Generally, reviewing historical documentation gives information about the geographical setting of quarries and location of the stones in the monument, but this information needs to be proved by field and laboratory studies. The comparative study of stone from quarries and monuments should basically include the following: (1) mineralogical and petrographical studies; (2) the chemical analysis of major, minor and trace elements; (3)stable isotopes determinations; (4) physical properties of quarry materials and unweathered building stone (water absorption, ultrasound transmission velocity, porosity and porous system, density, bulk density, compressive strength, etc.). This methodology was applied to Málaga Cathedral stones represented in the main façade, towers, and the western zone of the terrace, which, according to historical literature, came from Almayate (Miocene–Pliocene limestones) and Cerro Coronado (Permotriassic sandstone) in Málaga. The conclusion of the comparative study carried out on quarries and building stones was consistent with the information available from the historical documentation. 相似文献
2.
B. J. Cooper 《Australian Journal of Earth Sciences》2019,66(6):947-953
South Australia has the greatest utilisation of heritage or building stone in Australia because of its lack of timber resources. Consequently, natural stone was intensively used from the beginning of European colonisation. Building stones in South Australia, notable for their variety given the State’s diverse geology, can be challenging to designate as to their international importance. However, dimension stone in South Australia can also be designated as having national, regional, local or prospective importance. Commonly, stone in South Australia is restricted in use to a specific town, or even a single construction, and has only local significance except where use involves special stone characteristics, unusual stone masonry or use in a building with significant heritage. For instance, the town of Second Valley has a localised use of marble, likely the earliest use (1849) of this rock type in the State. Another example, ‘Adelaide Black Granite’, quarried since 1958, should probably be recognised internationally as a ‘Global Heritage Stone Resource’, as it has had intensive monumental use around Australia, utilisation as cladding in modern buildings, as well as paving and walling in Australia’s National Parliament in Canberra. It has also been exported, notably used for the Australian Embassy in Japan and for a major War Memorial at Le Hamel, France. South Australian slate quarries also provide significant heritage stone. For example, the Willunga Slate quarry south of Adelaide has been sourced for roofing slate and walling since 1840 and is arguably the longest continuous mining operation in Australia; this resource has obvious national significance given a period of quarrying extending to the present, coupled with national distribution of its products. Probably the most widespread stone sourced in South Australia is the surface limestone or calcrete, quarried in the Adelaide area until the 1850s and used for general construction. The stone continues to be used in rural areas. While arguably only of local significance, it could be considered to have national importance because of its extensive use in churches, public building, hotels, houses and simple walling across a vast area of South Australia. Additional research is needed to clarify the heritage status of many building stones used in South Australia. 相似文献
3.
Jonathan D. Radley 《Geology Today》2009,25(4):140-144
The Hornton Stone is an unusually pure ooidal ironstone of the Lower Jurassic Marlstone Rock Formation, cropping out on the Edge Hill escarpment and adjacent ironstone plateau in central England. The stone has been quarried for building and ornamental purposes since Medieval times, and more recently as a source of iron ore. Local quarries and buildings provide excellent opportunities to appreciate its fossil content, sedimentary structures and origin. 相似文献
4.
G.K. Lott 《Proceedings of the Geologists' Association. Geologists' Association》2011,122(5):923-932
The charm of the Isle of Wight, so much appreciated by visitors and the local population alike, is very much a combination of its delightful scenery and unique assemblage of vernacular buildings. These buildings range from isolated farmhouses to elaborate manor houses, castles and churches all constructed using the indigenous stone resources of the island. Today, these stone buildings, many of which date back to medieval times, are increasingly in need of conservation repair to maintain them for future generations. Essential to such conservation work is the safeguarding of the island's indigenous building stone sources as many of the stones used are unique to the island and no longer quarried. Protecting these stone sources could also provide stone for new building projects which would help to further enhance the character of the island's towns and villages. 相似文献
5.
Mauro F. La Russa Germana Barone Cristina M. Belfiore Paolo Mazzoleni Antonino Pezzino 《Environmental Earth Sciences》2011,62(6):1263-1272
Noto is an important Baroque urban center in south-eastern Sicily, which was completely reconstructed after the severe earthquake
of 1693. Most of its monuments and historic buildings were built in Pietra di Noto stone, a pale cream calcarenite, quarried
in outcrops located near the city. This stone, still currently used as building material, is undergoing many forms of alteration
and degradation, which cause significant damage to monuments. In this study, three commercial protective products were tested
on some Noto calcarenite samples from quarries, with the aim of assessing their protective effectiveness. In particular, petrographic
analyses by optical microscopy were carried out for textural characterization of the stone materials. Capillary water absorption,
porosimetric and colorimetric procedures, UV radiation and salt crystallization aging tests were performed to better evaluate
interactions between protective products and substrate. 相似文献
6.
Limestone quarrying and quarry reclamation in Britain 总被引：1，自引：1，他引：0
Limestones have been worked for many thousands of years — initially for building stone and agricultural lime and more recently for a wide range of construction and industrial uses. In most industrialized countries limestone quarries represent the most visually obvious and, in both process and landform terms, the most dramatic anthropogenic impact on karst terrain. However, quarrying has, to date, received surprisingly little attention from karst scientists. Research in the English Peak District suggested that the postexcavation evolution of quarried limestone rock faces was in part a result of the methods used in their excavation, and this led to the development of a technique designed to reduce the visual and environmental impacts of modern quarries by Landform replication. This involves the use of controlled restoration blasting techniques on quarried rock slopes to construct a landform sequence similar to that in the surrounding natural landscape. The constructed landforms are then partially revegetated using appropriate wildflower, grass, and/or tree species. 相似文献
7.
B. J. Smith S. McCabe D. McAllister C. Adamson H. A. Viles J. M. Curran 《Environmental Earth Sciences》2011,63(7-8):1691-1700
Environmental controls on stone decay processes are rapidly changing as a result of changing climate. UKCP09 projections for the 2020s (2010–2039) indicate that over much of the UK seasonality of precipitation will increase. Summer dryness and winter wetness are both set to increase, the latter linked to projected precipitation increases in autumn and spring months. If so, this could increase the time that stone structures remain wet and possibly the depth of moisture penetration, and it appears that building stone in Northern Ireland has already responded through an increased incidence of algal ‘greening’. This paper highlights the need for understanding the effects of climate change through a series of studies of largely sandstone structures. Current and projected climatic trends are therefore considered to have aesthetic, physical and chemical implications that are not currently built into our models of sandstone decay, especially with respect to the role played by deep-seated wetness on sandstone deterioration and decay progression and the feedbacks associated with, for example surface algal growth. In particular, it is proposed that algal biofilms will aid moisture retention and further facilitate moisture and dissolved salt penetration to depth. Thus, whilst the outer surface of stone may continue to experience frequent wetting and drying associated with individual precipitation events, the latter is less likely to be complete, and the interiors of building blocks may only experience wetting/drying in response to seasonal cycling. A possible consequence of deeper salt penetration could be a delay in the onset of surface deterioration, but more rapid and effective retreat once it commences as decay mechanisms ‘tap into a reservoir of deep salt’. 相似文献
8.
9.
《Proceedings of the Geologists' Association. Geologists' Association》2017,128(3):480-499
A multi-disciplinary study was undertaken of the Lower Old Red Sandstone building stones of Bromyard, Bromyard Downs and Bringsty Common, Herefordshire, UK, to trace their original quarry sources. 196 stone structures were recorded in detail and 3 broad lithological groups recognised. Combining old maps, archival sources, Light Detection and Ranging (LiDAR) data and testimony of local residents, the historic quarries in the area have been mapped. Field studies of the geology of quarries and outcrops have established the area of origin of two distinctive coarse grained lithologies. Intraformational conglomerates have been demonstrated, with some confidence, to be derived from Bromyard itself. Coarse, pebbly, quartzose sandstones have been traced to Bringsty Common and shown to be used only in the church in Bromyard before the 20th century. The origins of fine grained sandstone are found to be more complex. Through a combination of fieldwork and archival research, Clater Park Quarry is indicated as the origin of high quality green sandstones in Bromyard. 15 samples of sandstone from the Bromyard Downs, have been petrographically analysed by point counting to determine their clastic and mineralogical proportions. Early results of this analysis are presented which show modal variation in lithics, feldspars and cements that may serve to link quarries to buildings. Finally, it is suggested that at least some of the diversity of stone present in Bromyard is the result of slight variation in depositional processes in the immediately underlying bedrock. 相似文献
10.
S. McCabe B. J. Smith J. J. McAlister M. Gomez-Heras D. McAllister P. A. Warke J. M. Curran P. A. M. Basheer 《Environmental Earth Sciences》2013,69(4):1225-1235
Salt weathering is a crucial process that brings about a change in stone, from the scale of landscapes to stone outcrops and natural building stone façades. It is acknowledged that salt weathering is controlled by fluctuations in temperature and moisture, where repeated oscillations in these parameters can cause re-crystallisation, hydration/de-hydration of salts, bringing about stone surface loss in the form of, for example, granular disaggregation, scaling, and multiple flaking. However, this ‘traditional’ view of how salt weathering proceeds may need to be re-evaluated in the light of current and future climatic trends. Indeed, there is considerable scope for the investigation of consequences of climate change on geomorphological processes in general. Building on contemporary research on the ‘deep wetting’ of natural building stones, it is proposed that (as stone may be wetter for longer), ion diffusion may become a more prominent mechanism for the mixing of molecular constituents, and a shift in focus from physical damage to chemical change is suggested. Data from ion diffusion cell experiments are presented for three different sandstone types, demonstrating that salts may diffuse through porous stone relatively rapidly (in comparison to, for example, dense concrete). Pore water from stones undergoing diffusion experiments was extracted and analysed. Factors controlling ion diffusion relating to ‘time of wetness’ within stones are discussed, (continued saturation, connectivity of pores, mineralogy, behaviour of salts, sedimentary structure), and potential changes in system dynamics as a result of climate change are addressed. System inputs may change in terms of increased moisture input, translating into a greater depth of wetting front. Salts are likely to be ‘stored’ differently in stones, with salt being in solution for longer periods (during prolonged winter wetness). This has myriad implications in terms of the movement of ions by diffusion and the potential for chemical change in the stone (especially in more mobile constituents), leading to a weakening of the stone matrix/grain boundary cementing. The ‘output’ may be mobilisation and precipitation of elements leading to, for example, uneven cementing in the stone. This reduced strength of the stone, or compromised ability of the stone to absorb stress, is likely to make crystallisation a more efficacious mechanism of decay when it does occur. Thus, a delay in the onset of crystallisation while stonework is wet does not preclude exaggerated or accelerated material loss when it finally happens. 相似文献
11.
Malgorzata Labus 《Environmental Geology》2008,54(2):283-289
The scope of the paper is an attempt at the identification of the weathering-resistance classes within clastic rocks by means
of analysis of capillary pressure saturation curves. The porosimetric parameters corresponding to the cementing character
and the grains’ mineralogical content are very important features of stone building materials, because of the weathering processes.
The analysed rocks were Polish sandstones and muddy sandstones used for building purposes, collected from different geological
units of Poland (i.e. Sudety Mts. Carpathian Mts. and Holy Cross Mts.) The results indicate the usefulness of sandstone materials
for building purposes. They could also be used in conservation procedures and for the reconstruction of existing buildings
and monuments. Basing on the parameterisation, with the van Genuchten function, of cumulative capillary pressure saturation
curves, it was possible to distinguish four groups of the sampled rocks. The lithological features and weathering sustainability
within the groups are quite uniform, what allow identifying the weathering resistance classes. Taking into account the complicated
nature of all the factors influencing weathering processes, it is supposed that the presented parameterisation could be a
useful tool for weathering-resistance classification of clastic rocks. The classification could be useful in building industry
and in conservation of historical stone monuments. 相似文献
12.
Optimized extraction of dimension stone blocks 总被引：1，自引：1，他引：0
The profitable production of dimension stone mainly depends on the extractable block size. The regularity and volume of the blocks are of critical importance, and are controlled by the three-dimensional pattern of the discontinuity system. Therefore, optimization of block size has to be the aim when quarrying for natural stone. This is mainly connected to the quantification of joints and fractures, i.e., their spacing and orientation. The problem of finding unfractured blocks within arbitrarily oriented and distributed planes can be solved effectively by a numerical algorithm. The main effects of joint orientations on block sizes and shapes will be presented in this article. Quantification of unfractured blocks with the aim of optimization is illustrated by detailed studies on several quarries. The algorithm used in this study can be applied as a powerful tool in the planning of a quarry and the future exploitation of dimension stone. Application of the described approach is demonstrated on practical examples of quarrying natural stones, namely, sandstone, granite, rhyolite, etc. Block quarrying can be optimized by using the new 3D-BlockExpert approach. The quantification of unfractured rock masses is also shown to contribute to a more ecological protection and the sustainable use of natural resources. 相似文献
13.
Historic sandstone structures carry an inheritance, or a ‘memory’, of past stresses that the stone has undergone since its placement in a façade. This inheritance, which conditions present day performance, may be made up of long-term exposure to a combination of low magnitude background environmental factors (for example, salt weathering, temperature and moisture cycling) and, superimposed upon these, less frequent but potentially high magnitude events or ‘exceptional’ factors (for example, lime rendering, severe frost events, fire). The impact of complex histories on the decay pathways of historic sandstone is not clearly understood, but this paper seeks to improve that understanding through the use of a laboratory ‘process combination’ study. Blocks of quartz sandstone (Peakmoor, from NW England) were divided into subsets that experienced different histories (lime rendering and removal, fire and freeze–thaw cycles in isolation and combination) that reflected the event timeline of a real medieval sandstone monument in NE Ireland, Bonamargy Friary (McCabe et al. 2006b). These subsets were then subject to salt weathering cycles using a 10% salt solution of NaCl and MgSO4 that represents the ‘every-day’ stress environment of, for example, sandstone structures in coastal, or polluted urban, location. Block response to salt weathering was monitored by collecting, drying and weighing the debris that was released as blocks were immersed in the salt solution at the beginning of each cycle. The results illustrate the complexity of the stone decay system, showing that seemingly small variations in stress history can produce divergent response to salt weathering cycles. Applied to real-world historic sandstone structures, this concept may help to explain the spatial and temporal variability of sandstone response to background environmental factors on a single façade, and encourage conservators to include the role of stress inheritance when selecting and implementing conservation strategies. 相似文献
14.
The sawing rate is one of the most significant and effective parameters in extracting building stones via diamond wire sawing. This parameter designates the capability of diamond wire sawing for sawing different stones; in addition, the parameter gives rise to economical considerations for quarry designers. In this study, the existent relations between stone geotechnical parameters and the sawing rate of stones via diamond wire sawing were analyzed using regression and correlation coefficient as well as the collected data from Marmarit stone quarries. Moreover, we estimated the sawing rate of Marmarit using the dimensional stone rock mass rating (DSRMR); upon comparison of the data obtained from DSRMR our pre‐collected data on quarries, we did not gain satisfactory results from DSRMR, hence we used artificial neural network (ANN). The results showed that the percentage of Silica, the coefficient of water absorption, the uniaxial compressive strength (UCS), and abrasive hardness are the proper parameters for creating the ANN. Discontinuities have the least effects possible on diamond wire sawing. Having given the training possibility of the ANN, and its ability to evaluate relations among input parameters, the ANN, which was being trained with Marmarit's traits, was an accurate network for estimating diamond wire sawing in Marmarit quarries, although it could not generalize this network for other stones such as Chini and Crystal. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
15.
Marbles are extensively quarried at four different stratigraphical levels from Permo-Carbonifereous to Paleogene in the southern flank of the Menderes Massif in SW Turkey. These marbles differ in color, texture and pattern depending on their stratigraphical levels and are well known in the international trade as the Mugla Black (Permo-Carbonifereous), Mugla White (Cretaceous), Milas Lemon, Lilac, Aubergine, Pearl, Veined and White (Triassic) and Aegean Bordeaux (Paleogene) marbles. The mineralogical, chemical, physical and mechanical properties of the representative marbles samples obtained from the quarries working in four major metamorphic carbonate horizons in the cover successions of the Menderes Massif's southern flank in SW Turkey are determined and the results of over 1700 tests carried out on the selected marble samples are presented. The mean test values of the physical and mechanical tests are in general, found to be above the threshold acceptance values suggested by the American and Turkish Standards for the use of marbles as a building stone and in the same order as the properties of Italian (Carrara) and Greek marbles reported in the literature. Additionally, the mean test values of the marbles have given high correlations with one another and the relations obtained between the index test results determined by simple techniques requiring minimal sample preparation effort and the mean values of the more elaborate engineering tests results are presented as tables and graphs for wider use. 相似文献
16.
Howard Falcon‐Lang 《Geology Today》2011,27(1):34-38
The Isle of Portland is one of the jewels in the crown of the ‘Jurassic Coast’ of Dorset, southern England. Thomas Hardy aptly described this limestone peninsula as the ‘Gibraltar of Wessex’, and used its stone quarries as the backdrop for one of his novels (The Well‐Beloved). Quarries then, as now, work the world‐famous Portland Stone—a Jurassic oolitic limestone—from which St Paul's Cathedral and many other well‐known buildings are constructed. Rocks exposed in the numerous disused quarries scattered across the isle, together with exposures in spectacular sea‐cliffs, paint a vivid picture of life and environments, ～150 million years ago. In addition to Jurassic patch‐reefs, coastal sabhkas, fossil forests and dinosaur footprints found in the bedrock, more recent geological phenomena include two Quaternary raised beaches, solution caves filled with vertebrates, and massive coastal landslips. The aim of this article is to provide a field guide for those wishing to explore the geology of this little‐known region for themselves. 相似文献
17.
《矿物学报》2013,(Z1)
Marble that exploited for micronized calcite production in Nigde area (South Central Turkey) occur in the Upper Cretaceous Gümü ler, A gedi i, and Kaleboynu Formations of the Nigde Massif. Although there are a few marble producing quarries in the area, it is long been known that the marbles of this area are generally highly fractured and don’t yield large blocks or suitable slabs meeting the industrial demands. Thus, most of the production is currently carried out mainly as building stone, crushed stone and micronized calcite. Due mainly to high demand, micronized calcite has been becoming very significant export product to the state’s economy. Because the Nigde marbles are coarse grained with high CaCO3 content, high purity and whiteness, they are considered to be the highest quality micronized calcite quarries in the country. Consequently, the area drew many national and international investors resulting in significant increase in the number and extent of micronized calcite plants in the area. In early 1980’s, the city of Nigde had only one or two plants, it is now well over 5 including foreign investors and joint ventures. Annual production is also considerably increased from 20,000-30,000 tones to almost half a million tones and it is still in increasing trend. 相似文献
18.
19.
Sohan Singh Rajpurohit Rabindra Kumar Sinha Phalguni Sen Sahendra Singh 《Arabian Journal of Geosciences》2018,11(18):564
Cutting performance of diamond wire saw is a key factor influencing mine planning, production scheduling, and equipment selection for dimension stone quarries. It is normally measured in terms of cutting rate. Rock samples collected from various granite and marble quarries in India were tested in laboratory to determine their physico-mechanical properties. Cutting rate of diamond wire saw was measured in the field studies during the actual cutting process in quarries. Using these laboratory determined properties and the cutting rate, a multiple linear regression model has been developed to predict the cutting rate of diamond wire saw. Physico-mechanical properties of rocks determined in laboratory are used as independent variables and cutting rate as predictor variable in the regression model. The study indicates that the cutting rate increases with a decrease in most of the hardness and strength parameters of rock. The final model is tested for its goodness of fit indicating a significant linear relation between cutting rate and physico-mechanical properties, namely tensile strength, slake durability index, and Cerchar hardness index with regression coefficient of 94%. The resulting model can be used suitably for different types of hard to medium hard and soft dimension stones. The generalized model for estimating the cutting rate becomes a handy tool for mining engineers to work out operating efficiency, expenses, planning etc. of the dimension stone block cutting. 相似文献
20.
Luigi Germinario Siegfried Siegesmund Lara Maritan Claudio Mazzoli 《Environmental Earth Sciences》2017,76(21):739
Euganean trachyte is a subvolcanic porphyritic rock extracted in northern Italy with an age-old tradition of use as dimension stone, historically linked, in particular, to the fervent building activity brought by the Roman Empire and, later on, the Republic of Venice Serenissima. The results of a comprehensive petrophysical and mechanical characterization of Euganean trachyte from the most representative quarries are discussed here, involving the following properties: density, porosity, water absorption, capillary water uptake, hygroscopic water adsorption, hydric/hygric dilatation, water vapor diffusion, thermal expansion, and resistance to salt attack and abrasion. The different trachyte varieties, although belonging to the same quarry basin, exhibit a relatively wide array of technical performances, which are strongly dependent on pore volume, size, size distribution, shape, and degree of interconnection, controlling modes and rates of water transport and retention. Therefore, indications are provided for evaluating durability performance of the stone, with stress on water-driven weathering. Complementary information is finally given on the possible criteria followed in the antiquity for properly selecting the trachyte quarries to be exploited, and by a comparison with the properties of the most important trachytes extracted in Europe. 相似文献