首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 900 毫秒
1.
In the present research, coal fly ash, a waste by-product of thermal power plant, has been segregated to obtain hollow and spherical cenospheres which combined with activated carbon in different ratio for effectual remediation of wastewater. Fabricated cenospheres activated carbon (CNAC) composites were characterized by ATR-FTIR, SEM, XRD, BET and CILAS for functionality, surface modification, crystallinity, surface area, pore volume, pore size and particle size analysis, respectively. Batch adsorption has been applied to appraised maximum removal of Disperse Orange 25 (DO) and Disperse Blue 79:1 (DB) dyes at varying solution pH 2 to 12, adsorbent dose 0.1 g cenospheres + 0.1 g AC to 1.0 g cenospheres + 1.0 g AC, dye concentration 10 to 100 mg/L, agitation speed 80 to 240 rpm and contact time 5 to 300 min at three different temperatures (25, 35 and 45 °C). The maximum percentage removal was found to be 79 and 76% for DO and DB dyes, respectively, at optimized condition. Langmuir isotherm showed good interaction with adsorption data, and the obtained maximum equilibrium adsorption capacity was found to be 90.91 mg/g for DO and 83.33 mg/g for DB at 45 °C. Eventually, the negative ?G° (? 7.513 for DO and ? 7.767 for DB) has suggested the feasibility of dyes adsorption on CNAC composites.  相似文献   

2.
The ability of magnetically modified activated sludge affected by thermal treatment to remove water-soluble organic dyes was examined. Twelve different dyes were tested. Based on the results of the initial sorption study, four dyes (namely aniline blue, Nile blue, Bismarck brown Y and safranin O) were chosen for further experiments due to their promising binding onto magnetic activated sludge. Significant factors influencing adsorption efficiency such as dependence of contact time, initial pH or temperature were studied in detail. The adsorption process was very fast; more than 88 % of dye content (55 mg/L) was adsorbed within 15 min under experimental conditions used. The equilibrium adsorption data were analyzed by Freundlich, Langmuir and Sips adsorption isotherm models, and the fitting of each isotherm model to experimental data was assessed on the basis of error functions. The maximum adsorption capacities of magnetic activated sludge were 768.2, 246.9, 515.1 and 326.8 mg/g for aniline blue, Bismarck brown Y, Nile blue and safranin O, respectively. The kinetic studies indicated that adsorption of all selected dyes could be well described by the pseudo-second-order kinetic model, and the thermodynamic data suggested the spontaneous and endothermic process.  相似文献   

3.
In the present study, Juglans regia shells were used to prepare activated carbon by acid treatment method. J. regia shell-based activated carbon was used for the adsorption of two synthetic dyes namely, a basic dye malachite green and an acid dye amido black 10B. The prepared adsorbent was crushed and sieved to three different mesh sizes 100, 600 and 1,000 μm. The adsorbent was characterized by scanning electron microscopy, surface acidity and zero-point charge. Batch experiments were carried out by varying the parameters like initial aqueous phase pH, adsorbent dosage and initial dye concentration. The equilibrium data were tested with Langmuir, Freundlich, Redlich–Peterson and Sips isotherm at three different temperatures 293, 300 and 313 K and it was found that the Freundlich isotherm best fitted the adsorption of both the dyes. Kinetic data were tested with pseudo first-order model and pseudo second-order model. The mechanism for the adsorption of both the dyes onto the adsorbent was studied by fitting the kinetic data with intraparticle diffusion model and Boyd plot. External mass transfer was found to be the rate-determining step. Based on the ionic nature of the adsorbates, the extent of film diffusion and intraparticle diffusion varied; both being system specific. Thermodynamic parameters were also calculated. Finally, the process parameters of each adsorption system were compared to develop the understanding of the best suitable system.  相似文献   

4.
The adsorption capacity of raw and sodium hydroxide-treated pine cone powder in the removal of methylene blue (MB) from aqueous solution was investigated in a batch system. It was found that the base modified pine cone exhibits large adsorption capacity compared with raw pine cone. The extent of adsorption capacity was increased with the increase in NaOH concentration. Overall, the extent of MB dye adsorption increased with increase in initial dye concentration, contact time, and solution pH but decreased with increase in salt concentration and temperature for both the systems. Surface characteristics of pine cone and base modified pine cone were investigated using Fourier transform infrared spectrophotometer and scanning electron microscope. Equilibrium data were best described by both Langmuir isotherm and Freundlich adsorption isotherm. The maximum monolayer adsorption capacity was found to be 129.87 mg g?1 at solution pH of 9.02 for an initial dye concentration of 10 ppm by raw pine cone. The base modified pine cone showed the higher monolayer adsorption capacity of 142.25 mg g?1 compared with raw pine cone biomass. The value of separation factor, R L, from Langmuir equation and Freundlich constant, n, both give an indication of favourable adsorption. The various kinetic models, such as pseudo-first-order model, pseudo-second-order model, intraparticle diffusion model, double-exponential model, and liquid film diffusion model, were used to describe the kinetic and mechanism of adsorption process. Overall, kinetic studies showed that the dye adsorption process followed pseudo-second-order kinetics based on other models. The different kinetic parameters, including rate constant, half-adsorption time and diffusion coefficient, were determined at different physicochemical conditions. A single-stage bath adsorber design for the MB adsorption onto pine cone and modified pine cone has been presented based on the Langmuir isotherm model equation. Thermodynamic parameters, such as standard Gibbs free energy (ΔG 0), standard enthalpy (ΔH 0) and standard entropy (ΔS 0), were also calculated.  相似文献   

5.
Adsorption kinetic and equilibrium studies of two reactive dyes, namely, Reactive Red 31 and Reactive Red 2 were conducted. The equilibrium studies were conducted for various operational parameters such as initial dye concentration, pH, agitation speed, adsorbent dosage and temperature. The initial dye concentration was varied from 10 - 60 mg/L, pH from 2–11, agitation speed from 100–140 rpm, adsorbent dosage from 0.5 g to 2.5 g and temperature from 30 °C -50 °C respectively. The activated carbon of particle size 600 μm was developed from preliminary tannery sludge. The dye removal capacity of the two reactive red dyes decreased with increasing pH. The zero point charge for the sludge carbon was 9.0 and 7.0 for the two dyes, respectively. Batch kinetic data investigations on the removal of reactive dyes using tannery sludge activated carbon have been well described by the lagergren plots. It was suggested that the Pseudo second order adsorption mechanism was predominant for the sorption of the reactive dyes onto the tannery sludge based carbon. Thus, the adsorption phenomenon was suggested as a chemical process. The adsorption data fitted well with Langmuir model than the Freundlich model. The maximum adsorption capacity(q0) from Langmuir isotherm were found to have increased in the range of 23.15–39.37 mg/g and 47.62–55.87 mg/g for reactive dyes reactive red 31 and reactive red 2, respectively.  相似文献   

6.
The adsorption behavior of four anionic dyes and one disperse dye in single solution and binary solutions on fly ash was investigated in order to elucidate the effect of competitive adsorption on the kinetics. The experimental findings showed that adsorption equilibriums of four anionic dyes were reached within 50 min either in the single solution or in binary mixtures. Competitive adsorption increased the time of attaining equilibrium of disperse dye. Desorption of dyes suggested the predominant adsorption mechanisms, that is, chemisorption for anionic dyes and physisorption for disperse dye. For the binary mixtures, the anionic dyes could be adsorbed preferentially on fly ash at the first stage. Second-order kinetic models fitted better to the equilibrium data of all dyes in the single solution as well as in the binary mixtures. The maximum rate constant of intraparticle diffusion and the minimum external mass transfer coefficient was found for disperse dye both in single and in binary solutions. The intraparticle diffusion constants and external mass transfer coefficients of the four anionic dyes in binary solution are similar to those obtained in single solution. The Biot number confirmed that the intraparticle diffusion was the rate-limiting step in the dye sorption process.  相似文献   

7.
Atomic layer deposition (ALD) thin film coating was applied to improve the hydrophilia of biochar derived from black willow. 2 (2Al, 0.82 wt% Al2O3), 5 (5Al, 1.40 wt% Al2O3), and 10 (10Al, 2.36 wt% Al2O3) cycles of alumina ALD were applied. The biochars were characterized by inductively coupled plasma–atomic emission spectroscopy, nitrogen adsorption and desorption, scanning electron microscopy, and Fourier transform infrared spectroscopy. The adsorbents were utilized for the removal of methylene blue (MB) from an aqueous solution to evaluate their adsorption capacities. The 5Al biochar showed the highest adsorption capacity, compared to the uncoated biochar and other Al2O3 coated biochars, due to its improved hydrophilia. The amount of MB adsorbed onto the 5Al biochar was almost three times that adsorbed onto the uncoated biochar during the first hour of adsorption experiments. Adsorption isotherms were modeled with the Langmuir and Freundlich isotherms. The data fit well with the Langmuir isotherm, and the maximum adsorption capacities were found to be 26.8 and 35.0 mg/g at 25 °C for the uncoated biochar and 5Al biochar, respectively. The adsorbed MB amount per square meter achieved 1.3 mg/m2 onto the 5Al biochar, and it was twice the amount on the uncoated biochar. The experimental data were analyzed by pseudo-first-order and pseudo-second-order kinetics models of adsorption. The pseudo-second-order model better describes adsorption kinetic data for the uncoated biochar and 5Al biochar than the pseudo-first-order model does.  相似文献   

8.
Acacia nilotica was used for the adsorption of Reactive Black 5 (RB5) dye from an aqueous solution. Both the raw and activated (with H3PO4) carbon forms of Acacia nilotica (RAN and ANAC, respectively) were used for comparison. Various parameters (including dye concentration, contact time, temperature, and pH) were optimized to obtain the maximum adsorption capacity. RAN and ANAC were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The maximum experimental adsorption capacities for RAN and ANAC were 34.79 and 41.01 mg g?1, respectively, which agreed with the maximum adsorption capacities predicted by the Langmuir, Freundlich, and Dubinin–Radushkevich equilibrium isotherm models. The adsorption data of ANAC showed a good fit to the isotherm models based on the coefficient of determination (R 2): Langmuir type II (R 2 = 0.99) > Freundlich (R 2 = 0.9853) > Dubinin–Radushkevich (R 2 = 0.9659). This result suggested monolayer adsorption of RB5 dye. The adsorption of RB5 dye followed pseudo-second-order kinetics. The RAN adsorbent reflected an exothermic reaction (enthalpy change, ΔH = ?0.006 kJ mol?1) and increased randomness (standard entropy change, ΔS = 0.038 kJ mol?1) at the solid–solution interface. In contrast, ANAC reflected both exothermic [?0.011 kJ mol?1 (303–313 K)] and endothermic [0.003 kJ mol?1 (313–323 K)] reactions. However, the ΔS value of ANAC was lower when the RB5 adsorption increased from 313 to 323 K. The negative values for the Gibbs free energy change at all temperatures indicated that the adsorption of RB5 dye onto RAN and ANAC was spontaneous in the forward direction.  相似文献   

9.
Metal-complex dyes are widely used in textile industry, but harmful to the environment and human health due to aromatic structure and heavy metal ions. The objective of this work was to evaluate the adsorption potential of bamboo biochar for the removal of metal-complex dye acid black 172 from solutions. Freundlich model was more suitable for the adsorption process of bamboo biochar than Langmuir isotherm, indicating multilayer adsorption of acid black 172 on a heterogeneous bamboo biochar surface. Adsorption kinetics analysis of pseudo-second-order and Weber–Morris models revealed that intraparticle transport was not the only rate-limiting step. The bamboo biochar exhibited a good adsorption performance even at high ionic strength. Analysis based on the artificial neural network indicated that the temperature with a relative importance of 29 % appeared to be the most influential parameter in the adsorption process for dye removal, followed by time, ionic strength, pH and dye concentration.  相似文献   

10.
Removal of dyes by low-cost adsorbents is an effective method in wastewater treatment. Iranian natural clays were determined to be effective adsorbents for removal of a basic dye (methylene blue) from aqueous solutions in batch processes. Characterizations of the clays were carried out by X-ray diffraction, Brunauer–Emmett–Teller surface area analysis and field-emission scanning electron microscopy. Effects of the operational parameters such as adsorbent dosage, initial dye concentration, solution pH and temperature were investigated on the adsorption performance. Adsorption isotherms like Langmuir, Freundlich and Temkin were used to analyze the adsorption equilibrium data and Langmuir isotherm was the best fit. Adsorption kinetics was investigated by pseudo-first-order, pseudo-second-order and intraparticle diffusion models and the results showed that the adsorption system conforms well to the pseudo-second-order model. The thermodynamic parameters of adsorption (ΔS°, ΔH° and ΔG°) were obtained and showed that the adsorption processes were exothermic.  相似文献   

11.
焙烧水滑石吸附脱除水中硫酸根离子的研究   总被引：5，自引：0，他引：5  
利用焙烧水滑石对水中硫酸根离子进行吸附性能研究,考查了初始pH值、吸附时间、吸附剂用量等条件对吸附的影响。结果表明,焙烧水滑石对水中硫酸根离子具有良好的吸附能力。X射线衍射分析结果表明,水滑石及其焙烧产物对硫酸根的吸附机理不同。pH值对吸附的影响较大,pH值较低时吸附效果较好。吸附平衡符合Langmuir方程,室温下饱和吸附量为32.895 mg/g。  相似文献   

12.
In this research, ordered mesoporous silica, including MCM-41, was synthesized via sol–gel process and a propyl methacrylate-modified ordered mesoporous silica (MPS-MCM-41) was successfully synthesized via a postsynthesis grafting process. Then both MCM-41 and MPS-MCM-41 were characterized using FTIR, XRD, SEM and BET techniques. The synthesized materials were utilized as adsorbent for removal of diazinon pesticide from aqueous solutions. The effects of pH, contact time, adsorbent dose, initial concentration and temperature have been evaluated using removal efficiencies. Also, the kinetic, thermodynamic and isotherm models of diazinon adsorption were studied for the both MCM-41 and MPS-MCM-41. The results showed that the maximum adsorption capacities are 142 and 254 mg g?1 for the MCM-41 and MPS-MCM-41, respectively, at the initial concentration of 50 mg L?1, temperature of 298 K and adsorbent dose of 0.1 g L?1. The highest percentages of diazinon removal are 56.4 and 87.2 (at adsorbent dose of 2 g L?1 and the temperature of 318 K) for the MCM-41 and MPS-MCM-41, respectively. The Freundlich and Langmuir models are more compatible for describing equilibrium data of the diazinon adsorption capacity on the MCM-41 and MPS-MCM-41, respectively. Thermodynamic study indicated that the adsorption process of diazinon onto MCM-41 and MPS-MCM-41 is exothermic and has a spontaneous nature. The higher adsorption capacity and higher spontaneous nature of MPS-MCM-41 in comparison with MCM-41 might be due to the presence of the both hydrogen bonding and hydrophobic interaction between surface functional groups of MPS-MCM-41 (hydroxyl and propyl methacrylate) and diazinon functional groups.  相似文献   

13.
Tarap peel (TP) and oxalic-acid-modified Tarap peel (TP-OX) were used to remove brilliant green (BG) dye from aqueous solution. Surface modification of TP suggested that functional groups such as carboxyl, hydroxyl and amino were involved in the adsorption of BG onto TP. Parameters such as effects of pH, contact time, ionic strength, initial dye concentration and temperature were included to study the adsorption of BG onto TP and TP-OX. Adsorption isotherm models were used to investigate the adsorption process, while kinetics models were used to provide insight into the adsorption mechanisms. Optimised contact time of 2 h with no pH adjustment was used. Adsorption of BG onto TP was best fitted to the Freundlich model, while experimental data for TP-OX are best described by the Tempkin model. The maximum adsorption capacities were determined as 174 and 275 mg g?1 for TP and TP-OX, respectively. Thermodynamics study indicated the endothermic nature of adsorptions of BG onto both adsorbents. According to kinetics study, the adsorption mechanisms on both adsorbents followed pseudo-second-order model, and film diffusion might have major role in the adsorption process.  相似文献   

14.
This study assesses the ability of two low-cost adsorbents made from waste of Rapanea ferruginea treated with ethanol (WRf) and its H2SO4-treated analog (WRf/H2SO4) for the removal of two cationic dyes methylene blue (MB) and crystal violet (CV) from aqueous solutions. The adsorbent was characterized by scanning electron microscopy, Fourier transform infrared spectrometry, thermogravimetric analysis, point of zero charge (pHpzc), specific surface, and functional groups. The adsorption of dye onto the adsorbents was studied as a function of pH solution (2–12), contact time (up to 120 min) and initial concentration (20–120 mg/L), and temperature (25, 35, and 55 °C). The influence of these parameters on adsorption capacity was studied using the batch process. The response surface methodology (RSM) was used in the experimental design, modeling of the process, and optimizing of the variables and was optimized by the response involving Box–Behnken factorial design (15 runs). The results show that the data correlated well with the Sips isotherm. The maximum adsorption capacities of MB and CV onto WRf were found to be 69 and 106 mg/g, and onto WRf/H2SO4, the adsorption capacities were 33 and 125 mg/g, respectively. The kinetic data revealed that adsorption of cationic dyes onto the adsorbents closely follows the pseudo-second-order kinetic model. Regression analysis showed good fit of the experimental data to the second-order polynomial model, with coefficient of determination (R2) values for MB (R2?=?0.9685) and MB (R2?=?0.9832) for WRf and CV (R2?=?0.9685) and CV (R2?=?0.9832) for WRf/H2SO4 indicated that regression analysis is able to give a good prediction of response for the adsorption process in the range studied. The results revealed that waste from R. ferruginea is potentially an efficient and low-cost adsorbent for adsorption of MB and CV.  相似文献   

15.
Magnesium hydroxide-coated pyrolytic bio-char composite was prepared by chemical precipitation, and the adsorption behavior of anionic dye (directly frozen yellow) onto magnesium hydroxide-coated pyrolytic bio-char was investigated in the batch mode. The Fourier transform infrared spectroscopy, X-ray diffraction spectroscopy and X-ray fluorescence spectroscopy of adsorbents were characterized. Adsorption studies were performed at different pH, salt concentration, contacting time and dye concentration. The pH value of the solution influenced the adsorption capacity significantly, and adsorption is favored of pH 6–8. Salt coexisted in solution increased slightly directly frozen yellow adsorption capacity. The isotherm data were analyzed by Langmuir and Freundlich isotherm model, and Langmuir model was better to predict the equilibrium data. Thermodynamic calculations showed that the adsorption was a spontaneous and endothermic process. Exhausted magnesium hydroxide-coated pyrolytic bio-char was treated by microwave irradiation, and yield of regeneration was 98 % in the case of microwave irradiated time 5 min at 320 W. The magnesium hydroxide-coated pyrolytic bio-char can be reused.  相似文献   

16.
The adsorption of methyl tert-butyl ether by granular activated carbon was investigated. The experimental data were analyzed using the Freundlich isotherm and the Langmuir isotherm. Although equilibrium data were found to follow Freundlich isotherm model, it were fitted better by the Langmuir model with a maximum adsorption capacity of 204.1 mg/g. The kinetic data obtained at different concentrations were analyzed to predict the constant rate of adsorption using three common kinetic models: pseudo-first-order, pseudo-second-order equation and intraparticle diffusion equation. The pseudo-second-order model was suitable for describing the adsorption kinetics for the removal of methyl tert-butyl ether from aqueous solution onto granular activated carbon. Both the Lagergren first-order rate constant k 1 and pseudo-second-order rate constant k 2 decrease with increasing initial concentrations of methyl tert-butyl ether and the intraparticle diffusion rate constant k p shows the reverse characteristic. Analysis of sorption data using a boyd plot confirmed that external mass transfer is the main rate-limiting step at the initial stage of adsorption. Results illustrate that granular activated carbon is an effective adsorbent for methyl tert-butyl ether and also provide specific guidance into adsorption of methyl tert-butyl ether on granular activated carbon in contaminated groundwater.  相似文献   

17.
研究了水滑石(LDH)及其焙烧产物(LDO)吸附脱除水溶液中活性深蓝ST-2GLN的性能。考察了pH值、吸附剂投加量、时间等因素对吸附的影响。结果表明:LDH及LDO对活性深蓝ST-2GLN染料具有良好的脱除效果,室温下,1 g/L的LDH和0.5 g/L的LDO对浓度为100 mg/L的染料的脱色率分别达到96.11%和98.58%。pH值是影响吸附能力的关键因素,吸附剂对溶液pH值有一定缓冲作用。LDH及LDO对活性深蓝ST-2GLN吸附结果均符合Langmuir吸附等温式。饱和吸附后的LDH用高温热解法再生,再生产物吸附性能良好,随再生次数增多,脱色率下降。  相似文献   

18.
Graphene oxide nanosheets were synthesized by electrochemical exfoliation. X-ray diffraction, scanning electron microscopy, atomic force microscopy, Raman spectrometry and Fourier transform infrared spectrometry were used to characterize crystal structure, particle size, thickness and function groups of the nanosheets. The nanosheets were examined for adsorption of methyl orange, an anionic dye, in aqueous solution at different pHs and temperatures. The maximum adsorption capacity of methyl orange on graphene oxide nanosheets obtained from the Langmuir isotherm was 138.69 mg/g at pH 2.0, which is larger than that of other carbonaceous adsorbents. The large adsorption affinity of graphene oxide nanosheets to methyl orange might be due to the presence of hydrogen bonding and π–π interaction between methyl orange and graphene oxide nanosheets. Adsorption kinetics followed a pseudo-second-order kinetic model, and the isotherm adsorption results were fitted with Langmuir isotherm model in a monolayer adsorption manner. The thermodynamic studies indicated that the adsorption reaction was a spontaneous physisorption process.  相似文献   

19.
Peat of Brunei Darussalam shows a great potential for the removal of methylene blue (MB) and malachite green (MG) dyes from aqueous solution. Carefully controlled batch experiments performed by changing one parameter at a time indicate that the optimum time periods of agitation and settling required for maximum removal of MB are 2.0 and 1.0 h, respectively, while these values for MG are 4.0 and 1.0 h, respectively. The optimum pH is determined to be the ambient value, and under the optimum conditions, 90 % removal of both dyes was determined under laboratory conditions. The equilibrium adsorption data analyzed for various isotherm models suggest that the Sips and Redlich–Peterson (R–P) models are valid for MB and MG, respectively. Further, thermodynamic studies show that the adsorption of both dyes on peat is spontaneous and endothermic. The adsorption capacities (q max) of MB and MG dyes on peat are 0.45 and 0.31 mmol g?1, respectively. Characterization of the surfaces of peat before and after treatment of dyes by SEM and FTIR provides conclusive evidence of adsorption of both dyes. Kinetics studies indicate that the adsorption of both MB and MG dyes is favored toward the pseudo-second-order model, with a little contribution of MG to the pseudo-first-order model. These results suggest that peat is a potential low-cost adsorbent for the removal of MB and MG dyes.  相似文献   

20.
This paper reports the potential of chemically treated wood chips to remove copper (II) ions from aqueous solution a function of pH, adsorbent dose, initial copper (II) concentration and contact time by batch technique. The wood chips were treated with (a) boiling, (b) formaldehyde and (c) concentrated sulphuric acid and characterized by Fourier transform infrared spectroscopy, scanning electron microscopy and energy dispersive analysis X-ray. pH 5.0 was optimum with 86.1, 88.5 and 93.9 % copper (II) removal by boiled, formaldehyde-treated and concentrated sulphuric acid-treated wood chips, respectively, for dilute solutions at 20 g L?1 adsorbent dose. The experimental data were analysed using Freundlich, Langmuir, Dubinin–Radushkevich and Temkin isotherm models. It was found that Freundlich and Langmuir models fitted better the equilibrium adsorption data and the adsorption process followed pseudo-second-order reaction kinetics. The results showed that the copper (II) is considerably adsorbed on wood chips and it could be an economical option for the removal of copper from aqueous systems.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号