首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Progressive metamorphism of impure dolomitic limestone in the 1.5 to 2.5 km wide contact aureole surrounding the northernmost portion of the boulder batholith has resulted in a consistent sequence of uniformly distributed zones of low-variance mineral parageneses separated by abrupt and distinctive isograds. In silica-undersaturated, aluminous marbles, the following mineral assemblages occur, in order of increasing grade: calcite-dolomite-calcic amphibole-chlorite, calcite-dolomite-calcic amphibole-chlorite-spinel, calcite-dolomite-calcic amphibole-chlorite-olivine-spinel, calcite-dolomite-chlorite-olivine-spinel, calcite-dolomite-olivine-spinel. The spatial distribution of parageneses and the occurrence of low-variance parageneses indicate buffering of the pore fluid composition by the local mineral assemblages. The observed sequence of mineral reactions and the spacing of isograds is in good agreement with experimental and calculated equilibria in terms of P-T-X CO 2and temperatures of equilibration inferred from calcite-dolomite geothermometry, which range from 435 to 607 °C across the aureole.Microprobe analyses of coexisting minerals indicate attainment of exchange equilibrium. Calcic amphibole and chlorite coexisting with calcite and dolomite become progressively more aluminous with increasing grade; calcic amphibole changes rapidly from Al-poor tremolite to pargasite, while AlIV in Cte increases from 2.0 to 2.3 atoms per 8 tetrahedral sites. Observed low-variance assemblages fix the activities of calcic amphibole and chlorite end-member components as a function of P and T, and hence the systematic compositional variation in these phases is not an independent variable, but is controlled by the local mineral assemblage.  相似文献   

2.
Sapphirine, coexisting with quartz, is an indicator mineral for ultrahigh‐temperature metamorphism in aluminous rock compositions. Here a new activity‐composition model for sapphirine is combined with the internally consistent thermodynamic dataset used by THERMOCALC, for calculations primarily in K2O‐FeO‐MgO‐Al2O3‐SiO2‐H2O (KFMASH). A discrepancy between published experimentally derived FMAS grids and our calculations is understood with reference to H2O. Published FMAS grids effectively represent constant aH2O sections, thereby limiting their detailed use for the interpretation of mineral reaction textures in compositions with differing H2O. For the calculated KFMASH univariant reaction grid, sapphirine + quartz assemblages occur at P–T in excess of 6–7 kbar and 1005 °C. Sapphirine compositions and composition ranges are consistent with natural examples. However, as many univariant equilibria are typically not ‘seen’ by a specific bulk composition, the univariant reaction grid may reveal little about the detailed topology of multi‐variant equilibria, and therefore is of limited use for interpreting the P–T evolution of mineral assemblages and reaction sequences. Calculated pseudosections, which quantify bulk composition and multi‐variant equilibria, predict experimentally determined KFMASH mineral assemblages with consistent topology, and also indicate that sapphirine stabilizes at increasingly higher pressure and temperature as XMg increases. Although coexisting sapphirine and quartz can occur in relatively iron‐rich rocks if the bulk chemistry is sufficiently aluminous, the P–T window of stability shrinks with decreasing XMg. An array of mineral assemblages and mineral reaction sequences from natural sapphirine + quartz and other rocks from Enderby Land, Antarctica, are reproducible with calculated pseudosections. That consistent phase diagram calculations involving sapphirine can be performed allows for a more thorough assessment of the metamorphic evolution of high‐temperature granulite facies terranes than was previously possible. The establishment of a a‐x model for sapphirine provides the basis for expansion to larger, more geologically realistic chemical systems (e.g. involving Fe3+).  相似文献   

3.
Rocks of basic and intermediate bulk composition occur in orogenic terranes from all geological time periods and are thought to represent significant petrological components of the middle and lower continental crust. However, the former lack of appropriate thermodynamic models for silicate melt, amphibole and clinopyroxene that can be applied to such lithologies at high temperature has inhibited effective phase equilibrium modelling of their petrological evolution during amphibolite‐ and granulite facies metamorphism. In this work, we present phase diagrams calculated in the Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–O2 (NCKFMASHTO) compositional system for a range of natural basic and intermediate bulk compositions for conditions of 2–12 kbar and 600–1050 °C using newly parameterized activity–composition relationships detailed in a companion paper by Green et al. in this issue. Particular attention is given to mid‐ocean ridge basalt (MORB) and diorite protolith bulk compositions. Calculated subsolidus mineral assemblages in all basic and intermediate rock types are modally dominated by hornblende and plagioclase, with variable proportions of epidote, clinopyroxene, garnet, biotite, muscovite, quartz, titanite or ilmenite present at different pressures. The H2O‐saturated (wet) solidus has a negative P?T slope and occurs between ～620–690 °C at mid‐ to lower‐crustal pressures of 5–10 kbar. The lowest‐T melts generated close to the wet solidus are calculated to have granitic major‐element oxide compositions. Melting at higher temperature is attributed primarily to multivariate hydrate‐breakdown reactions involving biotite and/or hornblende. Partial melt compositions calculated at 800–1050 °C for MORB show good correlation with analysed compositions of experimental glasses produced via hydrate‐breakdown melting of natural and synthetic basic protoliths, with Niggli norms indicating that they would crystallize to trondhjemite or tonalite. Diorite is shown to be significantly more fertile than MORB and is calculated to produce high‐T melts (>800 °C) of granodioritic composition. Subsolidus and suprasolidus mineral assemblages show no significant variation between different members of the basalt family, although the P?T conditions at which orthopyroxene stabilizes, thus defining the prograde amphibolite–granulite transition, is strongly dependent on bulk‐rock oxidation state and water content. The petrological effects of open‐ and closed‐system processes on the mineral assemblages produced during prograde metamorphism and preserved during retrograde metamorphism are also examined via a case‐study analysis of a natural Archean amphibolite from the Lewisian Complex, northwest Scotland.  相似文献   

4.
The stability of pumpellyite + actinolite or riebeckite + epidote + hematite (with chlorite, albite, titanite, quartz and H2O in excess) mineral assemblages in LTMP metabasite rocks is strongly dependent on bulk composition. By using a thermodynamic approach (THERMOCALC), the importance of CaO and Fe2O3 bulk contents on the stability of these phases is illustrated using P–T and P–X phase diagrams. This approach allowed P–T conditions of ～4.0 kbar and ～260 °C to be calculated for the growth of pumpellyite + actinolite or riebeckite + epidote + hematite assemblages in rocks containing variable bulk CaO and Fe2O3 contents. These rocks form part of an accretionary wedge that developed along the east Australian margin during the Carboniferous–Triassic New England Orogen. P–T and P–X diagrams show that sodic amphibole, epidote and hematite will grow at these conditions in Fe2O3‐saturated (6.16 wt%) metabasic rocks, whereas actinolite and pumpellyite will be stable in CaO‐rich (10.30 wt%) rocks. With intermediate Fe2O3 (～3.50 wt%) and CaO (～8.30 wt%) contents, sodic amphibole, actinolite and epidote can coexist at these P–T conditions. For Fe2O3‐saturated rocks, compositional isopleths for sodic amphibole (Al3+ and Fe3+ on the M2 site), epidote (Fe3+/Fe3+ + Al3+) and chlorite (Fe2+/Fe2+ + Mg) were calculated to evaluate the efficiency of these cation exchanges as thermobarometers in LTMP metabasic rocks. Based on these calculations, it is shown that Al3+ in sodic amphibole and epidote is an excellent barometer in chlorite, albite, hematite, quartz and titanite buffered assemblages. The effectiveness of these barometers decreases with the breakdown of albite. In higher‐P stability fields where albite is absent, Fe2+‐Mg ratios in chlorite may be dependent on pressure. The Fe3+/Al and Fe2+/Mg ratios in epidote and chlorite are reliable thermometers in actinolite, epidote, chlorite, albite, quartz, hematite and titanite buffered assemblages.  相似文献   

5.
Reaction progress exhibited by multivariant assemblages in micaceous limestones can provide an excellent record of metamorphic fluid flow. However, it is necessary to understand the sensitivity of these assemblages to bulk‐composition parameters. Here, analysis of bulk composition on different scales and pseudosection construction are used to draw conclusions on relationships between bulk composition, fluid flow and reaction progress. Issues addressed include the effects of bulk composition on the mineralogical evolution of micaceous carbonates, the sensitivity of bulk composition to bulk‐composition sampling methods, the magnitude of cross‐layer fluid‐composition gradients, the potential for metasomatism to drive reaction progress, and the relative timing of reaction in adjacent layers. Pseudosections successfully represent observed mineral assemblages, constrain the position of reactions in T–X(CO2) space, and allow assessment of the sensitivity of reaction position, inferred reaction progress and calculated fluid fluxes to uncertainties in bulk composition. The scale of bulk‐composition sampling affects bulk compositions, calculated modes, predicted mineral assemblages and calculated fluid compositions. Larger samples record an average of different lithological subdomains, while point‐count‐derived bulk compositions are subject to uncertainties related to the small number of sample points. The optimum bulk composition for pseudosection purposes probably lies between measured bulk compositions. Results suggest that reaction progress in some extensively reacted layers was driven by infiltration of H2O‐rich fluid which flowed or diffused parallel to layering, perpendicular to layering in response to fluid‐composition gradients, and out of veins. Small variations in fluid composition across layering (ΔX(CO2) < 0.02) were maintained by internal buffering by the mineral assemblages. Internal buffering must also have driven samples up a sequence of narrow low‐variance fields in T–X(CO2) space, and so reaction in adjacent layers must have close to simultaneous. Metasomatic effects on reaction progress are likely to have been small, so long as the porosity was low.  相似文献   

6.
Using a previously published, internally consistent thermodynamic dataset and updated models of activity–composition relations for solid solutions, petrogenetic grids in the model system KFMASH (K2O–FeO–MgO–Al2O3–SiO2–H2O) and the subsystems KMASH and KFASH have been calculated with the software THERMOCALC 3.1 in the P–T range 5–36 kbar and 400–810 °C, involving garnet, chloritoid, biotite, carpholite, talc, chlorite, staurolite and kyanite/sillimanite with phengite, quartz/coesite and H2O in excess. These grids, together with calculated AFM compatibility diagrams and pseudosections, are shown to be powerful tools for delineating the phase equilibria and P–T conditions of pelitic high-P assemblages for a variety of bulk compositions. The calculated equilibria and mineral compositions are in good agreement with petrological observation. The calculation indicates that the typical whiteschist assemblage kyanite–talc is restricted to the rocks with extremely high XMg values, decreasing XMg in a bulk composition favoring the stability of chloritoid and garnet. Also, the chloritoid–talc paragenesis is stable over 19–20 kbar in a temperature range of ca. 520–620 °C, being more petrologically important than the previously highlighted assemblage talc–phengite. Moreover, contours of the calculated Si isopleths in phengite in P–T and P–X pseudosections for different bulk compositions extend the experimentally derived phengite geobarometers to various KFMASH assemblages.  相似文献   

7.
Amphibolite facies mafic rocks that consist mainly of hornblende, plagioclase and quartz may also contain combinations of chlorite, garnet, epidote, and, more unusually, staurolite, kyanite, sillimanite, cordierite and orthoamphiboles. Such assemblages can provide tighter constraints on the pressure and temperature evolution of metamorphic terranes than is usually possible from metabasites. Because of the high variance of most of the assemblages, the phase relationships in amphibolites depend on rock composition, in addition to pressure, temperature and fluid composition. The mineral equilibria in the Na2O–CaO–FeO–MgO–Al2O3–SiO2–H2O (NCFMASH) model system demonstrate that aluminium content is critical in controlling the occurrence of assemblages involving hornblende with aluminous minerals such as sillimanite, kyanite, staurolite and cordierite. Except in aluminous compositions, these assemblages are restricted to higher pressures. The iron to magnesium ratio (XFe), and to a lesser extent, sodium to calcium ratio, have important roles in determining which (if any) of the aluminous minerals occur under particular pressure–temperature conditions. Where aluminous minerals occur in amphibolites, the P–T–X dependence of their phase relationships is remarkably similar to that in metapelitic rocks. The mineral assemblages of Fe‐rich amphibolites are typically dominated by garnet‐ and staurolite‐bearing assemblages, whereas their more Mg‐rich counterparts contain chlorite and cordierite. Assemblages involving staurolite–hornblende can occur over a wide range of pressures (4–10 kbar) at temperatures of 560–650 °C; however, except in the more aluminous, iron‐rich compositions, they occupy a narrow pressure–temperature window. Thus, although their occurrence in ‘typical’ amphibolites may be indicative of relatively high pressure metamorphism, in more aluminous compositions their interpretation is less straightforward.  相似文献   

8.
Phase relations for a natural serpentinite containing 5 wt% of magnetite have been investigated using a multi-anvil apparatus between 6.5 and 11 GPa and 400–850 °C. Post-antigorite hydrous phase assemblages comprise the dense hydrous magnesium silicates (DHMSs) phase A (11.3 wt% H2O) and the aluminous phase E (Al-PhE, 11.9 wt% H2O). In addition, a ferromagnesian hydrous silicate (11.1 wt% H2O) identified as balangeroite (Mg,Fe)42Si16O54(OH)40, typically described in low pressure natural serpentinite, was found coexisting with Al-PhE between 650 and 700 °C at 8 GPa. In the natural antigorite system, phase E stability is extended to lower pressures (8 GPa) than previously reported in simple chemical systems. The reaction Al-phase E?=?garnet?+?olivine?+?H2O is constrained between 750 and 800 °C between 8 and 11 GPa as the terminal boundary between hydrous mineral assemblages and nominally anhydrous assemblages, hence restricting water transfer into the deep mantle to the coldest slabs. The water storage capacity of the assemblage Al-PhE?+?enstatite (high-clinoenstatite)?+?olivine, relevant for realistic hydrated slab composition along a relatively cold temperature path is estimated to be ca. 2 wt% H2O. Attempts to mass balance run products emphasizes the role of magnetite in phase equilibria, and suggests the importance of ferric iron in the stabilization of hydrous phases such as balangeroite and aluminous phase E.  相似文献   

9.
Melt loss and the preservation of granulite facies mineral assemblages   总被引：29，自引：3，他引：29  
The loss of a metamorphic fluid via the partitioning of H2O into silicate melt at higher metamorphic grade implies that, in the absence of open system behaviour of melt, the amount of H2O contained within rocks remains constant at temperatures above the solidus. Thus, granulite facies rocks, composed of predominantly anhydrous minerals and a hydrous silicate melt should undergo considerable retrogression to hydrous upper amphibolite facies assemblages on cooling as the melt crystallizes and releases its H2O. The common occurrence of weakly retrogressed granulite facies assemblages is consistent with substantial melt loss from the majority of granulite facies rocks. Phase diagram modelling of the effects of melt loss in hypothetical aluminous and subaluminous metapelitic compositions shows that the amount of melt that has to be removed from a rock to preserve a granulite facies assemblage varies markedly with rock composition, the number of partial melt loss events and the P–T conditions at which melt loss occurs. In an aluminous metapelite, the removal of nearly all of the melt at temperatures above the breakdown of biotite is required for the preservation of the peak mineral assemblage. In contrast, the proportion of melt loss required to preserve peak assemblages in a subaluminous metapelite is close to half that required for the aluminous metapelite. Thus, if a given proportion of melt is removed from a sequence of metapelitic granulites of varying composition, the degree of preservation of the peak metamorphic assemblage may vary widely.  相似文献   

10.
ABSTRACT

Metaultramafic rocks (MUR) in the Ashe Metamorphic Suite (AMS) of northwestern North Carolina include quartz ± feldspar-bearing QF-amphibolites and quartz-deficient, locally talc-, chlorite-, and/or Mg-amphibole-bearing TC-amphibolites. Some workers divide TC-amphibolites into Todd and Edmonds types, based on mineral and geochemical differences, and we provisionally add a third type – olivine ± pyroxene-rich, Rich Mountain-type rocks. Regionally, MUR bodies range from equant, Rich Mountain- to highly elongate, Todd-TC-amphibolite-type bodies. The MURs exhibit three to five mineral associations containing assemblages with olivine, anthophyllitic amphibole, Mg-hornblende, Mg-actinolite, cummingtonite, and serpentine representing decreasing eclogite to greenschist facies grades of metamorphism over time. MUR protoliths are difficult to determine. Southwestern MUR bodies have remnant olivine ± pyroxene-rich assemblages representing ultrabasic-basic, dunite-peridotite-pyroxenite protoliths. Northeastern TC-amphibolite MURs contain hornblende and actinolitic amphiboles plus chlorites – aluminous and calcic assemblages suggesting to some that metasomatism of basic, QF-amphibolites yields all TC-amphibolites. Yet MgO-CaO-Al2O3 and trace element chemistries of many TC-amphibolites resemble compositions of plagioclase peridotites. We show that a few AMS TC-amphibolites had basaltic/gabbroic protoliths, while presenting arguments opposing application of the metasomatic hypothesis to all TC-amphibolites. We establish that MUR bodies are petrologically heterolithic and that TC-amphibolites are in contact with many rock types; that those with high Cr, Ni, and Mg have olivine- or pyroxene-dominated protoliths; that most exhibit three or more metamorphic mineral associations; and that contacts thought to be metasomatic are structural. Clearly, different MUR bodies have different chemistries representing various protoliths, and have different mineral assemblages, reflecting both chemical composition and metamorphic history. Spot sampling of heterolithic MUR bodies does not reveal MUR body character or history or allow ‘type’ designations. We recommend that the subdivision of MUR bodies into ‘types’ be abandoned and that the metasomatic hypothesis be carefully applied. AMS MURs and associated metamafic rocks likely represent fragments of dismembered ophiolites from various ophiolite types.  相似文献   

11.
Hydrothermal synthesis of Fe-pum-pellyites was conducted using high pressure cold-seal apparatus and solid oxygen buffering techniques at temperatures between 250°C and 550°C and 2.0–9.1 kbar Pfluid. Fe-pumpellyites were synthesized from partially crystalline gel mixtures of compositions: 4CaO - 2.1Al2O3_1.5FeO - 0.3MgO - 6SiO2 (II) and 3CaO - 1.5 Al2O3 - 2.7FeO - 0.3MgO - 6SiO2 (III) in the presence of excess H2O at Pfluid of 5–9.1 Kbar, temperatures between 275°C and 325°C, and fO2 defined by the QFM and HM buffers; for both of these compositions (II and III), the condensed synthetic run products included minor 7Å chlorite ± garnet ± Fe-oxide. The cell dimensions and aggregate refractive index (a= 19.13(2)Å, b= 5.940(4)Å, c= 8.847(5)Å, ±= 97.37(6)±, and n= 1.702(2)) of the pum-pellyite synthesized from the bulk composition II mix are compatible with those of natural pumpellyites containing similar total Fe contents. Attempts at synthesizing Fe-pumpellyites from a Mg-free bulk composition were not successful; these results are consistent with the total absence of natural Mg-free pumpellyites. The higher temperature, higher oxygen fugacity assemblages of the equivalent bulk compositions (II and III) consist of epidote ± minor amounts of chlorite, garnet, quartz, hematite, and magnetite. The results of these synthesis experiments accord with the mineral parageneses observed in low-grade metabasites which imply that Fe-pumpellyites are replaced by epidote with increasing temperature and/or fO2 and that Fe3+ is preferentially partitioned into epidote with respect to coexisting pum-pellyite. In addition, these synthesis experiments indicate that Fe-bearing pumpellyites crystallize at and are stable to lower temperatures than more aluminous pumpellyites—a result also consistent with natural systems.  相似文献   

12.
Whiteschists appear in numerous high- and ultrahigh-pressure rock suites and are characterized by the mineral assemblage kyanite + talc (+-quartz or coesite). We demonstrate that whiteschist mineral assemblages are well stable up to pressures of more than 4 GPa but may already form at pressures of 0.5 GPa. The formation of whiteschists largely depends on the composition of the protolith, which requires elevated contents of Al and Mg as well as low Fe, Ca, and Na contents, as otherwise chloritoid, amphibole, feldspar, or omphacite are formed instead of kyanite or talc. Furthermore, the stability field of the whiteschist mineral assemblage strongly depends on XCO2 and fO2: already at low values of XCO2, CO2 binds Mg to carbonates strongly reducing the whiteschist stability field, whereas high fO2 enlarges the stability field and stabilizes yoderite. Thus, the scarcity of whiteschist is not necessarily due to unusual P–T conditions, but to the restricted range of suitable protolith compositions and the spatial distribution of these protoliths: (1) continental sedimentary rocks and (2) hydrothermally and metasomatically altered felsic to mafic rocks. The continental sedimentary rocks that may produce whiteschist mineral assemblages typically have been deposited under arid climatic conditions in closed evaporitic basins and may be restricted to relatively low latitudes. These rocks often contain large amounts of the clay minerals palygorskite and sepiolite. Marine sediments generally do not yield whiteschist mineral assemblages as marine shales commonly have too high iron contents. Sabkha deposits may have too high CO2 contents. Protoliths of appropriate geochemical composition occur in and on continental crust. Therefore, whiteschist assemblages typically are only found in settings of continental collision or where continental fragments were involved in subduction. Our calculations demonstrate that whiteschists can form by closed-system metamorphism, which implies that the chemical and isotopic composition of these rocks provide constraints on the development of the protoliths.  相似文献   

13.
K, Na and Ca are the most common elements transported during mantle metasomatism and result in formation of phlogopite (K), amphibole (Na) and clinopyroxene (Ca) by various reactions. This review presents models for this type of metasomatism based on experiments on the pyrolite-K2CO3-H2O, pyrolite-Na2 CO3-H2O systems and on the pyrolite-CaCO3 system. The addition of K2CO3 and Na2CO3 lowers the liquidus of pyrolite providing a low temperature, alkali-rich hydrous melt which may ascend and metasomatize overlying mantle regions. Several reactions are proposed for the formation of phlogopite and amphibole (pargasite-edenite) in these systems. The compositions of amphiboles correspond to those found in metasomatized mantle xenoliths. In contrast, Ca-metasomatism is considered to be mainly an anhydrous process in which orthopyroxene and carbonate react to produce clinopyroxene, olivine and CO2. High pressure liquids in this model system are of carbonatitic composition and this low viscosity melt can ascend converting harzburgite mantle assemblages to olivine-rich wehrlite. Based on an inverse experimental approach, moderately high degrees of partial melting of a model metasomatized alkali clinopyroxenite xenolith yield liquids at 30kb which are very comparable in composition to the lavas enclosing such types of xenoliths. Experimental modelling of mantle metasomatism produces assemblages which are in good agreement with the mineral assemblages and textural relationships found in metasomatized mantle xenoliths from areas such as West Eifel and South-West Uganda.  相似文献   

14.
Phase relations for the magnesio-hornblende bulk composition, 2 CaO·4 MgO·Al2O3·7 SiO2+ excess H2O, have been investigated to 10 kb employing hydrothermal and piston-cylinder techniques. The low-temperature limit of amphibole in this system lies at 519° C, 1,000 bars, 541° C, 2,000 bars, and 718° C, 10 kb. The low-T assemblage consists of an+chl+di+tc(+f), and is related to the adjacent high-T equilibrium assemblage, amph+an+chl+f, by the solid-solid reaction (A): 2 di+tc=tr. Small amounts of aluminum, hypothesized to be preferentially dissolved in the cpx (and in the tc) relative to amph, may account for the broad P-T stability range of the di+tc assemblage in the synthetic work relative to systems involving stoichiometric tr, Ca2Mg5Si8O22(OH)2, such as are common in natural, Al-poor calc-silicate parageneses. Alternatively, the low-temperature assemblage produced in the experiments may be metastable. For the investigated bulk composition, synthetic tremolitic-cummingtonitic amphibole contains relatively modest amounts of ts, Ca2Mg3Al2 IVSi6-Al2 IVO22(OH)2; at pressures of 1,000–3,000 bars, solid solution extends from near tremolite only to about cu11tr69ts20, analogous to most analyzed natural magnesio-hornblendic specimens. At 10 kb fluid pressure, the solid solution reaches approximately cu06tr53ts41 for the investigated bulk composition, and appears to be virtually independent of temperature. Amphibole and 14 Å chl react within the amphibole stability field, along curve (B), at about 704° C and 2,000 bars, to produce an, en, fo and f (H=40.9 kcal/ mole); at pressures greater than approximately 7kb, due to the incompatibility of an and fo, the higher temperature assemblage consists of amph, an, en, sp and f. Above P fluid– T curve (B), the amphibole coexists with an+en+fo+f at low pressures; at higher pressures, the amphibole, which is in equilibrium with an+en+sp+f, is relatively more aluminous. The high-T stability limit of aluminous tr+fo lies approximately 20–25° C below the dehydration curve for stoichiometric tremolite on its own bulk composition. Reaction (C), tr+fo=2 di+5 en+f (H = 39.4 kcal/mole), produces an+di+en+f, the highest temperature subsolidus assemblage investigated for the tr50ts50 bulk composition. Hydrous melt is encountered at temperatures at least as low as 900° C at 10 kb, and at that fluid pressure coexists with amphibole over an interval of more than 60° C. Limited solid solution observed between tr and ts in nature (tr100-70) is accounted for by the restricted range of amphibole compositions produced in the present study. Such amphiboles, moreover, appear to have both high- and low-temperature stability limits, as demonstrated by the experimental results.Institute of Geophysics and Planetary Physics Publication No. 2811  相似文献   

15.
Amorphous gels and oxides corresponding to Ca2Mg5Si8O23 in bulk composition have been reacted to phase assemblages containing tremolitic amphibole using routine hydrothermal methods in the pressure/temperature range from 1–22 kbar and 600–875° C. The products have been characterized by X-ray diffraction, optical microscopy and high-resolution electron microscopy. The nature of the amphibole microstructure and the types of intergrown biopyriboles vary markedly as a function of synthesis temperature and pressure, reflecting different amphibole growth mechanisms. At P(H2O)<10 kbar, within or very near the stability field of fale, amphibole forms by topotactic reaction from this metastably crystallized, intermediate phase; chain multiplicity faults (CMFs) with m3 are numerous; the bulk compositional shift in the disordered amphibole crystals is compensated in the run product by coexisting diopside. At P(H2O)10 kbar, but still in the talc stability field, amphibole grows topotactically from and also nucleates preferentially on metastable diopside by a dissolution/regrowth process; the two phases form fine ( 100 Å) lamellar intergrowths with almost no CMFs with m3, and the compositional shift induced by armoured diopside relics is compensated by discrete talc. The same lamellar amphibole/diopside microstructure is observed at temperatures above the talc stability field and at all pressures investigated, but the compositional shift is compensated by enstatite+quartz. Varying the experimental parameters (run duration; H2O content) does not significantly affect the above observations. For the wide range of pressures and temperatures investigated, the synthetic amphiboles of the present study appear to correspond very closely to end-member tremolite. The observed product assemblages and apparent compositional shifts of the amphibole, equivalent in Ca/Mg ratio to as much as 11 mol% magnesiocummingtonite component, can be explained by the incorporation of CMFs in this phase. We argue that CMF-induced shifts in Ca/Mg ratios also play a significant role for the 10 mol% magnesiocummingtonite component commonly assumed in analogous experiments in the present literature. The genuine magnesiocummingtonite solid-solution component may be much less than 10 mol%. Empirical high-resolution transmission electron microscopy observations of preferential corrosion structures at crystal terminations suggest that, to a first approximation, structurally disordered tremolites exhibit the reaction behaviour of mechanical mixtures down to the unit-cell scale. The thermodynamic properties of synthetic tremolite, even in small intergrown lamellae within disordered crystals, should therefore closely approach those of discrete, ideal tremolite single crystals, in accord with the converging agreement shown by recent comparative experimental studies on the phase relationships of natural and synthetic tremolite.  相似文献   

16.
Calculated phase equilibria among the minerals amphibole, chlorite, clinopyroxene, orthopyroxene, olivine, dolomite, magnesite, serpentine, brucite, calcite, quartz and fluid are presented for the system CaO–FeO–MgO–Al2O3–SiO2–CO2–H2O (CaF-MASCH), with chlorite and H2O–CO2 fluid in excess and for a temperature range of 440°C–600°C and low pressures. The minerals chosen in CaFMASCH represent the great majority of phases encountered in metamorphosed ultramafic rocks. The changes in mineral compositions in terms of FeMg-1 and (Mg, Fe)SiAl-1Al-1 are related to variations in the intensive parameters. For example, equilibria at high in the presence of chlorite involve minerals which are relatively aluminous compared with those at low . The calculated invariant, univariant and divariant equilibria are compared with naturally-occurring greenschist and amphibolite facies ultramafic mineral assemblages. The correspondence of sequences of mineral assemblages and the compositions of the minerals in the assemblages is very good.  相似文献   

17.
Magnesian metamorphic rocks with metapelitic mineral assemblage and composition are of great interest in metamorphic petrology for their ability to constrain P–T conditions in terranes where metamorphism is not easily visible. Phase–assemblage diagrams for natural and model magnesian metapelites in the system KFMASH are presented to document how phase relationships respond to water activity, bulk composition, pressure and temperature. The phase assemblages displayed on these phase diagrams are consistent with natural mineral assemblages occurring in magnesian metapelites. It is shown that the equilibrium assemblages at high pressure conditions are very sensitive to a(H2O). Specifically, the appearance of the characteristic HP assemblage chloritoid–talc–phengite–quartz (with excess H2O) in the magnesian metapelites of the Monte Rosa nappe (Western Alps) is due to the reduction of a(H2O). Furthermore, the mineral assemblages are determined by the whole-rock FeO/(FeO+MgO) ratio and effective Al content X A as well as P and T. The predicted mineral associations for the low- and high-X A model bulk compositions of magnesian metapelites at high pressure are not dependent on the X A variations as they show a similar sequence of mineral assemblages. Above 20 kbar, the prograde sequence of assemblages associated with phengite (with excess SiO2 and H2O) for low- and high-X A bulk compositions of magnesian metapelites is: carpholite–chlorite → chlorite–chloritoid → chloritoid–talc → chloritoid–talc–kyanite → talc–garnet–kyanite → garnet–kyanite ± biotite. At low to medium P–T conditions, a low-X A stabilises the phengite-bearing assemblages associated with chlorite, chlorite + K-feldspar and chlorite + biotite while a high-X A results in the chlorite–phengite bearing assemblages associated with pyrophyllite, andalusite, kyanite and carpholite. A high-X A magnesian metapelite with nearly iron-free content stabilises the talc–kyanite–phengite assemblage at moderate to high P–T conditions. Taking into account the effective bulk composition and a(H2O) involved in the metamorphic history, the phase–assemblage diagrams presented here may be applied to all magnesian metapelites that have compositions within the system KFMASH and therefore may contribute to gaining insights into the metamorphic evolution of terranes. As an example, the magnesian metapelites of the Monte Rosa nappe have been investigated, and an exhumation path with P–T conditions for the western roof of the Monte Rosa nappe has been derived for the first time. The exhumation shows first a near-isothermal decompression from the Alpine eclogite peak conditions around 24 kbar and 505°C down to approximately 8 kbar and 475°C followed by a second decompression with concomitant cooling.M. Frey: deceased  相似文献   

18.
Stabilities of amphibole and chlorite in mafic and ultramafic compositions have been considered in the model system CaO+MgO+Al2O3+SiO2+H2O. From topological arguments two petrogenetic grids have been constructed. Although available experimental data in CMASH are compatible with the grid in which amphibole reacts out before chlorite in model ultramafic compositions for the pressure range 6 to 15 kbar, naturally observed mineral assemblages and some experimental data in more complex systems favour the other grid in which chlorite reacts out before amphibole at all pressures. This discrepancy between natural and model systems is due to differential movement of the dehydration equilibria of the two hydrates reflecting the variation of activity of H2O or of components other than CMASH.  相似文献   

19.
Chemically zoned porphyroblasts in metamorphic rocks indicate that diffusional processes could not maintain equilibrium conditions on a grain scale during porphyroblast growth or establish it afterwards. An effect of this inability to maintain equilibrium is the progressive removal of elements forming garnet cores from any metamorphic reaction that occurs at the porphyroblast boundaries or in the matrix of the rock. To examine this effect on mineral assemblages, the Bence–Albee matrix correction was applied to X‐ray intensity maps collected using eclogite samples from northern New Caledonia in order to determine the chemical composition of all parts of the sample. The manipulation of these element maps allows a quantitative analysis of the fractionation of the bulk rock composition between garnet cores and the matrix. A series of calculated equilibrium‐volume compositions represents the change in matrix chemistry with progressive elemental fractionation as a consequence of prograde garnet growth under high‐P conditions. Pressure–temperature pseudosections are calculated for these compositions, in the CaO–Na2O–FeO–MgO–Al2O3–SiO2–H2O system. Assemblages, modal proportions and mineral textures observed in the New Caledonian eclogites can be closely modelled by progressively ‘removing’ elements forming garnet cores from the bulk rock composition. The pseudosections demonstrate how chemical fractionation effects the peak metamorphic assemblage, prograde textures and the development of retrograde assemblages.  相似文献   

20.
Pumpellyite from four-phase assemblages (pumpellyite + epidote + prehnite + chlorite; pumpellyite + epidote + actinolite + chlorite; pumpellyite + epidote + Na-amphibole + chlorite, together with common excess phases), considered to be low variance in a CaO-(MgO + FeO)-Al2O3-Fe2O3 (+Na2O + SiO2+ H2O) system, have been examined in areas which underwent metamorphism in the prehnite-pumpellyite, pumpellyite-actinolite and low-temperature blueschist facies respectively. The analysed mineral assemblages are compared for nearly constant (basaltic) chemical composition at varying metamorphic grade and for varying chemical composition (basic, intermediate, acidic) at constant metamorphic conditions (low-temperature blueschist facies). In the studied mineral assemblages, coexisting phases approached near chemical equilibrium. At constant (basaltic) bulk rock composition the MgO content of pumpellyite increases, and the XFe3+ of both pumpellyite and epidote decreases with increasing metamorphic grade, the Fe3+ being preferentially concentrated in epidote. Both pumpellyite and epidote compositions vary with the bulk rock composition at isofacial conditions; pumpellyite becomes progressively enriched in Fe and depleted in Mg from basic to intermediate and acidic bulk rock compositions. The compositional comparison of pumpellyites from high-variance (1–3 phases) assemblages in various bulk rock compositions (basic, intermediate, acidic rocks, greywackes, gabbros) shows that the compositional fields of both pumpellyite and epidote are wide and variable, broadly overlapping the compositional effects observed at varying metamorphic grade in low-variance assemblages. The intrinsic stability of both Fe- and Al-rich pumpellyites extends across the complete range of the considered metamorphic conditions. Element partitioning between coexisting phases is the main control on the mineral composition at different P-T conditions.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号