共查询到19条相似文献，搜索用时 14 毫秒
1.
2.
川西攀枝花—西昌地区结晶基底的划分 总被引：7，自引：0，他引：7
长期以来，由于同位素年龄依据不足和没有正确区分晚二叠世热接触变质岩、喜马拉雅期动力变质岩与前震旦纪区域变质岩，攀西地区结晶基底的划分存在许多困难和问题。本文依据1：50000区域地质调查结果，将原仁和群(Pt1R)修改为晚二叠世岩浆岩和喜马拉雅期动力变质岩，将五马箐(岩)组(Pt1w)和顶针杂岩(Pt1D)修改为晚二叠世热接触变质岩和喜马拉雅期动力变质岩，将安宁村组(Ptlα)和纸房沟组(Pt1z)修改为震旦系地层，并依据岩石学、岩石化学和微量元素地球化学特征，将结晶基底划分为变质侵入体、变质表壳岩和TTG套岩，论述了结晶基底的成因和演化。 相似文献
3.
新疆阿尔泰阿祖拜地区发育两种类型区域变质作用,第一种为区域低温动力变质作用,第二种为区域动力热流变质作用.阿祖拜地区递增变质带是后者的典型代表之一,从花岗岩体外接触带依次发育矽线石-堇青带、红柱石-十字石带、黑云母-石榴石带,递增变质作用强度呈逐渐减弱趋势.结合变形变质作用特征和同位素年龄,可识别出3个变形变质阶段.早期阶段以区域低温动力变质作用为主,形成绿片岩相变质岩石组合;峰期阶段为区域动力热流变质作用,形成典型的递增变质带;晚期阶段则属退化变质作用.不同变质作用类型代表了不同大地构造环境,记录了造山带演化历史年和动力学过程. 相似文献
4.
苏鲁超高压带内石桥浅变质岩的地质成因及其研究意义 总被引：1，自引：1，他引：0
苏鲁造山带超高压变质带内部出露仅经过绿片岩相变质作用的浅变质岩系,地质调查显示,石桥浅变质岩与周边超高压变质岩呈构造接触(构造片岩);地球化学研究证实,该浅变质岩形成于扬子板块北缘大陆边缘厚地壳上裂陷或沉积盆地的构造背景;单矿物电子探针分析结果显示,其部分浅变质岩发育多硅白云母,形成于中-高压相变质环境,说明这些浅变质岩曾经历大陆板块俯冲的动力变质作用过程。在此基础上,进一步讨论浅变质岩的成因机制及其与超高压变质岩和扬子板块俯冲之间的关系。 相似文献
5.
新疆太古宙变质岩系岩石组合特征 总被引：1，自引：2，他引：1
新疆塔里木盆地周边发育前寒武纪变质岩系，其太古宙变质岩系分布在库鲁克塔格－星星峡及阿尔金山前。铁克力克可能有新太古代变质岩系的存在。库鲁克塔格地区太古代变质岩出露较全，由古－中太古代及新太古代变质岩组成：阿尔金山前、南天山及中天山尾亚地区均有新太古代变质岩系分布。太古代变质岩系由表壳岩和变质深成岩（岩系）组成，前者往往呈规模不等的包体散布在变质深成岩中。变质作用主要为区域中高温变质作用和区域动力热流变质作用，变质相为中深变质的角闪岩相－麻粒岩相，具中深部构造相的塑性流变特征。 相似文献
6.
7.
8.
为建立一个较严密、系统的常见变质岩石的岩相学分类,采用既反映岩石结构构造特征又蕴含岩石基本组成的变质岩组构组分作为岩石分类的一级分类指标,以岩石结构、构造和组构组分的成分依次作为二、三和四级指标,划分了归属于造山区域变质岩、接触热变质岩、断层动力变质岩、蚀变交代变质岩和混合岩这5个大类变质成因的基本岩石.如岩石的地质产状已知,可用对应于地质产状的成因类型变质岩替换组构组分,升级为一级分类指标,然后用同样程序进行划分.本分类方案中,造山区域变质岩与接触热变质岩因具有相同组构组分,因此,大部分基本岩石名称相同,但可借助其地质产状和一些特征变质矿物的特殊显微构造的有无将它们区分开来.本分类方案的分类效果优于国内外现有的岩相学分类方案. 相似文献
9.
动力变质岩的分类命名及特征尹怀模（云南地勘局区调所实验室）动力变质岩是指各类原岩经构造动力作用而变形（包括脆性、韧性）、变质形成的岩石。它产于脆性断层和韧性断层（韧性剪切带）之中，呈狭窄带状展布的广义动力变质岩。变质程度随构造层次的加深而变深，与地热... 相似文献
10.
1：5万区调发现，红格地区变质岩不是前震旦系区域变质岩，它与邻近的会理群变质岩特征有明显的不同，而与把关河地区震旦系上统把关河砂岩、观音崖组和灯影组在岩性组合特征、岩石化学特征和稀土元素特征方面比较，则有惊人的相似。它们是震旦系的沉积岩受华力西-印支期岩浆作用的影响而变质的热接触变质岩。 相似文献
11.
红柱石矿床产于花岗闪长岩与上元古界震旦系地层之外接触带,该矿床属高铝泥质沉积岩在区域变质产物的基础上,再经后期接触热变质成矿,成矿后的动力变质作用及热液改造迹象比较明显。 相似文献
12.
接触热变质带的划分对变质岩变质过程的研究提供了有力的依据。基于京西羊屎沟地区地层中变质矿物组合及其空间分布情况,对该区的接触热变质带进行划分,并分析变质作用的形成阶段。由于燕山期房山岩浆岩体侵入,使围岩发生不同程度的接触热变质作用,形成各种特征变质矿物。在特定岩石类型中,特征变质矿物有规律的组合。采用偏光显微镜透射法和X射线衍射分析,分为透辉石-透闪石带、二云母带、红柱石白云母带和绢云母带,表明距离岩体由近至远,岩石变质程度由高到低呈分带现象。伴随着岩浆侵入不同阶段形成不同的特征变质矿物,将接触热变质作用分为5个渐进的阶段。 相似文献
13.
变质流体研究新进展 总被引：7，自引：2，他引：7
变质流体是变质过程的主要动力学因素之一。目前变质流体研究主要集中在下部地壳麻粒岩相变质流体，俯冲带高压－超高压变质流体和接触变质流体等方面。研究的主要问题是流体流动机制和元素迁移，流体－岩石相互作用和流体来源。下部地壳麻粒岩相变质流体以ＣＯ２为主，具有较低的ａＨ２Ｏ。δ１３Ｃ研究表明大约２／３ＣＯ２是深成的。富ＣＯ２流体流动是紫苏花岗岩形成和热扰动的原因之一，也是麻粒岩形成和大离子亲石元素亏损的主要因素。俯冲带是高压、超高压变质作用发生和流体活动最活跃的场所。流体富含Ｈ２Ｏ、ＣＨ４和ＣＯ２，可以诱导部分熔融反应和岛弧岩浆作用。高压变质条件下的矿物稳定性也与流体有关。同位素研究表明，在超高压变质期间没有化学上完全相同的流体大规模循环。流体－熔体系统模式能更有效地解释下插板片的元素再循环。接触变质流体研究主要集中在含有易于发生流体－岩石反应的不纯碳酸盐岩地区。硅灰石带中流体／岩石比率高达４０∶１，表明接触变质岩石中有大量流体存在。接触变质过程流体成分有较大差异，主要取决于流体来源、原岩性质和侵入体特征。流体流动和循环模式受控于构造变形，岩浆作用和变质过程的动力学条件及流体成分。 相似文献
14.
滇西北石鼓片岩变质变形特征及其划分 总被引：3，自引：0，他引：3
滇西北金沙江结合带东侧的石鼓变质岩系，可划分为石鼓岩群和巨甸岩群。石鼓岩群受区域动力热流变质作用改造，主期变形环境为中、深部构造相；巨甸岩群受区域低温动力变质作用改造，与之相伴的构造形迹属中、浅部构造相。石鼓岩群包含羊坡岩组和露西岩组，巨甸岩群可进一步划分为陇巴岩组和塔城岩组。同一岩群的岩组，变质作用、构造变形特征相同，但变质岩石组合及原岩特征却有明显差别。 相似文献
15.
V. V. Reverdatto V. N. Sharapov V. G. Melamed 《Contributions to Mineralogy and Petrology》1970,29(4):310-337
At least sis or perhaps seven types of contact metamorphism may be distinguished in nature (see Table 1). They differ from each other by a set of metamorphic facies in the exocontact aureoles, also by thermodynamic conditions of metamorphism. The manifestation of some types of metamorphism depends chiefly on magma temperature and composition, on the initial temperature of the country rocks (prior to contact metamorphism) and on the depth of the intrusive formation. The movement of magma through the intrusive channel (chamber) and the kinetic peculiarities of metamorphism exert additional influence on metamorphic conditions.Since the temperature elevation with depth corresponds in a general way to the increase in the lithostatic pressure, the maximum temperature levels attained at the direct intrusive contact must differ for various pressure levels (or depths). The two series of contact metamorphic rooks may be distinguished by their pressure: 1. common hornfelsic rock low-pressure series (types of metamorphism 1–4, Table 1), and 2. thermal transformed gneissous rock series metamorphosed under moderately high pressure (types 5–6, Table 1). The initial temperature of the country rock is low in the first series. It may apparently be discounted in certain cases. The usual non-abyssal contact low-pressure metamorphism (the proper contact metamorphism) depends essentially on magma temperature and composition, while in the second series, the initial temperature of the country rocks may be rather high. This and the effect of the intrusive heat and high lithostatic pressure results in rock transformation under conditions of the regional metamorphism of the facies (under moderately high pressure).Since superposition of the local temperature field on a regional high-temperature field in the neighbourhood of intrusives (in deep conditions) results in an increase in the thickness of the contact aureole, Ingersoll's criterion (the ratio of the thickness of the aureole to the thickness of the intrusive body) may be helpful for distinguishing abyssal from non-abyssal contact metamorphism. The values of this criterion cannot exceed 0.2–0.3 for the non-abyssal contact metamorphism. 相似文献
16.
黑龙江省上古生界伊利石的成因标志及其地质意义 总被引：2，自引：0，他引：2
采用XRD技术,对黑龙江省上古生界泥质岩石中伊利石结晶度、多型和b值进行了测定,以揭示该区晚古生代极低级变质作用特征。测定结果表明,伊利石结晶度（Kübler指数）主要变化于0.31～0.77 °Δ2θ,伊利石（白云母）b值主要变化于8.983～9.011 A伊利石（白云母）多型为1Md型、1Md+2M1混合型和2M1型。上述伊利石矿物学参数揭示出,该区上古生界泥质岩石主体属于中-低压相晚期成岩带-低级近变质带范畴。进一步的研究表明,伊利石b值和伊利石结晶度存在明显的负相关关系,即随伊利石b值的逐渐增大（压力升高）,伊利石结晶度逐渐减小（温度升高）,暗示伊利石形成于一种正常的与埋深有关的成岩-变质环境,继而揭示出该区上古生界的成岩作用与变质作用是一个统一的连续过程而不是两个相互无关的地质事件。结合区域地质背景和内蒙、吉林等地伊利石的研究成果可以认为,东北地区上古生界并未遭受大规模的绿片岩相区域变质作用,局部出现的某些绿片岩相（或更高级别）的变质岩应是动力变质作用或接触变质作用的产物。 相似文献
17.
Lu Minjie 《吉林大学学报(地球科学版)》1986,(3)
在川西—滇东地区,前人一直将会理群、昆阳群等作为该区所出露的最古老的地层,并认为它们代表了扬子地台的最老基底。笔者通过对该区详细的变质地质研究认为,在它们之下还存在着一套与之完全不同的层状变质岩系,我们将其称为康定群,推测其时代至少为早元古宙或晚太古宙。它与中、晚元古宙的会理群、昆阳群等共同构成了扬子地台的古老基底,为基底的两个重要的地质构造单元,分别代表了本区早期地壳演化的不同阶段。 相似文献
18.
The paper studies CO2 degassing and controlling factors under the condition of contact metamorphism in the Shuangshan area, southern Tan-Lu fault belt and the method of calculating the amount of CO2 degassing. The results show that the amount of CO2 degassing is controlled by the characteristics of the country rocks, including the thermal conductivity, penetrability, porosity and connectivity. Compositions, size and depth of intrusive rock also have an important influence on CO2 degassing, i.e., they generated numerous cracks in the country rocks, and thus allowed the easy flow and accumulation of fluids. The amount of CO2 flux in contact metamorphism is calculated quantitatively based on the metamorphic reaction and time--integrated fluid flux. The value (0.729- 2.446×104 mol/cm2) of CO2 flux suggests that CO2 was provided mainly by the contact metamorphic reaction. The generation and releasing of CO2 are positively correlated with the degree of metamorphism, and XCO2 in fluids gradually increases from dolomite zone to calcite zone, but in the zone of grossular, fluid flux is the largest and XCO2 sharply decreases due to involvement of magmatic water. This study presents evidence that a large amount of industrial-scale CO2 can be produced during contact metamorphism. On the basis of theoretical and practical studies, a cone model has been proposed to response CO2 degassing for the contact metamorphism, and it can be used to explore CO2 accumulations beyond the oil-gas basins. This model can also be applied to the study of inorganic genesis of CO2 accumulations. 相似文献
19.
The paper studies CO2 degassing and controlling factors under the condition of contact metamorphism in the Shuangshan area, southern Tan-Lu fault belt and the method of calculating the amount of CO2 degassing. The results show that the amount of CO2 degassing is controlled by the characteristics of the country rocks, including the thermal conductivity, penetrability, porosity and connectivity. Compositions, size and depth of intrusive rock also have an important influence on CO2 degassing, i.e., they generated numerous cracks in the country rocks, and thus allowed the easy flow and accumulation of fluids. The amount of CO2 flux in contact metamorphism is calculated quantitatively based on the metamorphic reaction and time-integrated fluid flux. The value （0.729- 2.446×10^4 mol/cm^2） of CO2 flux suggests that CO2 was provided mainly by the contact metamorphic reaction. The generation and releasing of CO2 are positively correlated with the degree of metamorphism, and XCO2 in fluids gradually increases from dolomite zone to calcite zone, but in the zone of grossular, fluid flux is the largest and XCO2 sharply decreases due to involvement of magmatic water. This study presents evidence that a large amount of industrial-scale CO2 can be produced during contact metamorphism. On the basis of theoretical and practical studies, a cone model has been proposed to response CO2 degassing for the contact metamorphism, and it can be used to explore CO2 accumulations beyond the oil-gas basins. This model can also be applied to the study of inorganic genesis of CO2 accumulations. 相似文献