首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 265 毫秒
1.
In this paper, we compare the geology and petrography of Miocene and Archean submarine rhyolite hyaloclastites. The hyaloclastites are sparsely (10% or less) plagioclase- (± quartz and pyroxene-) phyric. The hyaloclastites consist of a feeder dyke from which branch lava lobes and irregularly shaped lava pods. The lava bodies consist of a holocrystalline core with microlitic texture, grading outward into a flow-layered rim zone and, finally, into obsidian. The proportion of plagioclase and pyroxene microlites decreases outward. Some layers of the rim zone may be pumiceous (vesicularity up to 50%, vesicle size 1 mm or less), but most of the lava has less than 5% vesicles one or a few cm long. The obsidian shows perlitic fracture patterns. The lava bodies grade through an in-situ breccia into a hyaloclastite composed of angular obsidian granules and, in many cases, of fragments of lava lobes.Evidence for alteration at high temperature is as follows: in the Archean rhyolite hyaloclastites, plagioclase microlites are overgrown by quartz-albite spherulites. Furthermore, parts of the Miocene and Archean hyaloclastite have been cemented and granules have been marginally replaced by quartz and albite. Hyaloclastite cemented at high temperature locally shows columnar joints. At low temperatures, obsidian has been hydrated and/or has been replaced by clay minerals, zeolites, chlorite or prehnite. “Chess-board” albite and fibroradial prehnite in Archean hyaloclastite is possibly a pseudomorph after zeolites.The sparsely porphyritic nature of the lava and the absence of microlites from the quenched glass suggests that the thyolite hyaloclastites extruded at high (near liquidus) temperature. Furthermore pumice is present only locally, in the flow-layered rim zone and in fragments derived from that zone. These features suggest that vesiculation was inhibited by the weight of the water column. High temperature and possibly the volatile (H2O) content explain the relatively low viscosity and shear strength of the lava, and resulted in the flow morphology particular to this type of hyaloclastic rhyolite flows.  相似文献   

2.
Development of a Jurassic volcano-tectonic rift basin in the southern Andes created a setting in which thick, rhyolitic volcaniclastic sequences accumulated in submarine environments and were penetrated by hypabyssal intrusions during or shortly after deposition. In the Ultima Esperanza District of southern Chile, extensive masses of peperite were produced when rhyolite magma underwent quenching, disruption, and commingling with wet, unconsolidated sediments during intrusion at shallow levels beneath the sea floor. The peperite forms discordant intrusive masses with volumes of up to several cubic kilometers, in which large, widely spaced, coherent rhyolite feeder pods are surrounded by, and grade into closely packed and dispersed peperite. Closely packed peperite consists of tightly fitting clasts separated by sediment-filled fractures. In dispersed peperite, the sediment forms a matrix surrounding large masses of fractured rhyolite and smaller more widely separated rhyolite clasts; evidence of in situ quench fragmentation is well preserved on both outcrop and thin-section scales. Thin sections show that clast margins and, in some cases, entire small clasts underwent cooling-contraction granulation, releasing shards of quenched rhyolite and fragments of phenocrysts into the adjacent sediment.Interaction between magma and wet sediment was non-explosive and involved fluidization of the host sediments, creating space for the intruding magma and causing pervasive injection of highly mobile sediment along thermal contraction cracks in quench-fragmented rhyolite. The ability of the magma to undergo complex intermixing with large volumes of sediment, with widespread preservation of in situ fragmentation textures, is interpreted to reflect a relatively low magma viscosity, presumably caused by retention of volatiles in the magma at the ambient pressures involved.Beds of redeposited peperite within the rift-basin fill indicate that some of the intrusive peperite masses reached the sea floor, undergoing slumping and mass flow. The peperites were thus an important local source of coarse-grained debris during the evolution of the basin.  相似文献   

3.
Momo-iwa, Rebun Island, Hokkaido, Japan, is a dacite cryptodome 200–300 m across and 190 m high. The dome is inferred to have intruded wet, poorly consolidated sediment in a shallow marine environment. The internal structure of the dome is concentric, with a massive core, banded rim, and narrow brecciated border, all of which are composed of compositionally uniform feldspar-phyric dacite. Boundaries between each of the zones are distinct but gradational. The massive core consists of homogeneous coherent (unfractured) dacite and is characterized by radial columnar joints 60–200 cm across. The banded rim encircles the massive core and is 40 m wide. It is characterized by large-scale flow banding parallel to the dome surface. The flow banding comprises alternating partly crystalline and more glassy bands 80–150 cm thick. The outermost brecciated border is up to 80 cm thick, and consists of in situ breccia and blocky peperite. The in situ breccia comprises polyhedral dacite clasts 5–20 cm across and a cogenetic granular matrix. The blocky peperite consists of polyhedral dacite clasts 0.5–2 cm across separated by the host sediment (mudstone). The internal structures of the dome suggest endogenous growth involving a continuous magma supply during a single intrusive phase and simple expansion from the interior. Although much larger, the internal structures of Momo-iwa closely resemble those of lobes in subaqueous felsic lobe-hyaloclastite lavas.  相似文献   

4.
The climactic event of Mount Pinatubo represents one of the most thoroughly studied eruptions of the century and has provided important insights into the dynamics of explosive volcanism. We have performed detailed textural analyses of the white and gray pumices of the plinian and pyroclastic flow deposits, and found that differences in color and clast density reflect different crystal and vesicle amounts and size distributions. White pumice has higher vesicularity, deformed and highly coalesced vesicles with thin walls, euhedral phenocrysts and microlite-free groundmass. Gray pumice shows lower vesicularity, wider ranges in vesicle number density, limited coalescence, vesicles with thick walls that are less deformed, phenocrysts and microphenocrysts with abundant solution pitting, and groundmass containing ubiquitous microlites and crystal fragments. The presence of white and gray pumice varieties and the broad range in vesicularity and vesicle number density that characterizes both of them appear to record the complexities of conduit processes such as magma vesiculation and fragmentation and the development of conduit regions marked by different rheological behaviors. In particular, the results of this study suggest the likely importance of intense shear and viscous dissipation at the conduit walls, a mechanism that may be responsible for the creation and discharge of the gray pumice of this eruption along with the dominant white variety.  相似文献   

5.
Large silicic explosive eruptions are the most catastrophic volcanic events. Yet, the intratelluric mechanisms underlying are not fully understood. Here we report a field and laboratory study of the Kos Plateau Tuff (KPT, 161 ka, Aegean Volcanic Arc), which provides an excellent geological example of conduit processes that control magma vesiculation and fragmentation during intermediate- to large-scale caldera-forming eruptions. A prominent feature of the KPT is the occurrence of quite unusual platy-shaped tube pumice clasts in pyroclastic fall and current deposits from the early eruption phases preceding caldera collapse. On macroscopic and SEM observations, flat clast faces are elongated parallel to tube vesicles, while transverse surfaces often occur at ~ 45° to vesicle elongation. This peculiar pumice texture provides evidence of high shear stresses related to strong velocity gradients normal to conduit walls, which induced vesiculation and fragmentation of the ascending magma. Either an increasing mass discharge rate without adequate enlargement of a narrow central feeder conduit or a developing fissure-like feeder system related to incipient caldera collapse provided suitable conditions for the generation of plate tube pumice within magma volumes under high shear during the pre-climactic KPT eruption phases. This mechanism implies that the closer to the conduit walls (where the stronger are the velocity gradients) the larger was the proportion of plate vs. conventional (lensoid) juvenile fragments in the ascending gas–pyroclast mixture. Consequently, plate pumice clasts were mainly entrained in the outer portions of the jet and convecting regions of a sustained, Plinian-type, eruption column, as well as in occasional lateral blast currents generated at the vent. As a whole, plate pumice clasts in the peripheral portions of the column were transported at lower altitudes and deposited by fallout or partial collapse closer to the vent relative to lensoid ones that dominated in the inner column portions. The plate tube pumice proportion decreased abruptly up to disappearance during the emplacement of the main pyroclastic currents and lithic-rich breccias related to extensive caldera collapse at the eruption climax, as a consequence of an overall widening of the magma feeder system through the opening of multiple conduits and eruptive vents, along with fissure erosion, concomitant to the disruption of the collapsing block.  相似文献   

6.
 The Middle Jurassic Tuttle Lake Formation in the northern Sierra Nevada, California, comprises a thick volcaniclastic sequence deposited in a submarine island-arc setting and penetrated by numerous related hypabyssal intrusions. A composite andesite-diorite intrusive complex ≥4.5 km long and ≥1.5 km thick was emplaced while the host Tuttle Lake sediments were still wet and unconsolidated. Large parts of the intrusive complex consist of peperite formed where andesitic magma intruded and intermixed with tuff, lapilli-tuff and tuff-breccia. The southern half of the complex consists of augite-phyric andesite containing peperite in numerous small, isolated pockets and in more extensive, laterally continuous zones. The peperites comprise three main types recognized previously in other peperite studies. Fluidal peperite consists of small (≤30 cm), closely spaced, at least partly interconnected, globular to amoeboid andesite bodies enclosed by tuff. This peperite type developed during intrusion of magma into fine-grained wet sediment along unstable interfaces, and fluidization of the sediment facilitated development of complex intrusive geometries. Blocky peperite and mixed blocky and fluidal peperite formed where magma intruded coarser sediment and underwent variable degrees of brittle fragmentation by quenching and dynamic stressing of rigid margins, possibly aided by small steam explosions. The northern half of the intrusive complex consists predominantly of a different type of peperite, in which decimetre-scale plagioclase-phyric andesite clasts with ellipsoidal, elongate, or angular, polyhedral shapes are closely packed to widely dispersed within disrupted host sediment. Textural features suggest the andesite clasts were derived from conduits through which magma was flowing, and preserved remnants of the conduits are represented by elongate, sinuous bodies up to 30 m or more in length. Disruption and dispersal of the andesite clasts are inferred to have occurred at least partly by steam explosions that ripped apart a network of interconnected feeder conduits penetrating the host sediments. Closely packed peperite is present adjacent to mappable intrusions of coherent andesite, and along the margin of a large mass of coarse-grained diorite. These coherent intrusions are considered to be major feeders for this part of the complex. Examples of magma/wet sediment interaction similar in scale to the extensive peperites described here occur elsewhere in ancient island-arc strata in the northern Sierra Nevada. Based on these and other published examples, large-scale peperites probably are more common than generally realized and are likely to be important in settings where thick sediment sequences accumulate during active volcanism. Careful mapping in well-exposed terrains may be required to recognize large-scale peperite complexes of this type. Received: 8 June 1998 / Accepted: 4 December 1998  相似文献   

7.
Cas  R A F  Allen  R L  Bull  S W  Clifford  B A  Wright  J V 《Bulletin of Volcanology》1990,52(3):159-174
The relics of two Late Devonian subaqueous rhyolitic dome-top tuff and pumice cone successions are preserved in the Bunga Beds outlier of the Boyd Volcanic Complex, southeastern Australia. These cone successions and other rhyolitic volcanics of the Bunga Beds are associated with turbidite and other deep-water massflow sedimentary rocks. The two cone successions have a generally similar stratigraphy. At the base, flow-banded, variably autobrecciated and quench-fragmented rhyolite, representing an intrusive to extrusive dome, is overlain by rhyolitesediment breccia, representing extrusion of the dome through the deep-water sediment pile and resedimentation down its flanks. In the northern cone succession an overlying, succession of bedded pumiceous crystal-rich to crystal-poor tuffs represents the onset of pyroclastic activity and growth of a tuff cone. An overyling debris flow deposit represents degradation of part of the cone. The topmost unit, a stratified pumice succession, is thought to represent another cone-building eruptive phase, and is separated from the underlying strata by a major slide surface. The southern cone succession contains less tuff and abundant pumice, and is also terminated by a debris-flow deposit, indicating cone degradation. A modern analogue for the inferred eruptive style and sequence is the 1953–1957 rhyolite eruption that formed the Tuluman Island lava-tuff cone complex in the Bismarck Sea. The eruptions were often cyclical consisting of an initial inferred submarine-lava-forming stage, passing into a pumicecone-forming stage, in some cases a subaeriallava-forming stage, and a final stage, following the cessation of volcanism, during which the cones collapsed gravitationally or were destroyed by wave erosion. Using observations from both the Tuluman Island eruptions and the preserved stratigraphies of the Devonian tuff cones, a dynamic model is proposed for the formation of subaqueous rhyolitic dome-top tuff and pumice cones.  相似文献   

8.
The Highway–Reward massive sulphide deposit is hosted by a silicic volcanic succession in the Cambro-Ordovician Seventy Mile Range Group, northeastern Australia. Three principal lithofacies associations have been identified in the host succession: the volcanogenic sedimentary facies association, the primary volcanic facies association and the resedimented syn-eruptive facies association. The volcanogenic sedimentary facies association comprises volcanic and non-volcanic siltstone and sandstone turbidites that indicate submarine settings below storm wave base. Lithofacies of the primary volcanic facies association include coherent rhyolite, rhyodacite and dacite, and associated non-stratified breccia facies (autoclastic breccia and peperite). The resedimented volcaniclastic facies association contains clasts that were initially formed and deposited by volcanic processes, but then redeposited by mass-flow processes. Resedimentation was more or less syn-eruptive so that the deposits are essentially monomictic and clast shapes are unmodified. This facies association includes monomictic rhyolitic to dacitic breccia (resedimented autoclastic facies), siltstone-matrix rhyolitic to dacitic breccia (resedimented intrusive hyaloclastite or resedimented peperite) and graded lithic-crystal-pumice breccia and sandstone (pumiceous and crystal-rich turbidites). The graded lithic-crystal-pumice breccia and sandstone facies is the submarine record of a volcanic centre(s) that is not preserved or is located outside the study area. Pumice, shards, and crystals are pyroclasts that reflect the importance of explosive magmatic and/or phreatomagmatic eruptions and suggest that the source vents were in shallow water or subaerial settings.The lithofacies associations at Highway–Reward collectively define a submarine, shallow-intrusion-dominated volcanic centre. Contact relationships and phenocryst populations indicate the presence of more than 13 distinct porphyritic units with a collective volume of 0.5 km3. Single porphyritic units vary from <10 to 350 m in thickness and some are less than 200 m in diameter. Ten of the porphyritic units studied in the immediate host sequence to the Highway–Reward deposit are entirely intrusive. Two of the units lack features diagnostic of their emplacement mechanism and could be either lavas and intrusions. Direct evidence for eruption at the seafloor is limited to a single partly extrusive cryptodome. However, distinctive units of resedimented autoclastic breccia indicate the presence nearby of additional lavas and domes.The size and shape of the lavas and intrusions reflect a restricted supply of magma during eruption/intrusion, the style of emplacement, and the subaqueous emplacement environment. Due to rapid quenching and mixing with unconsolidated clastic facies, the sills and cryptodomes did not spread far from their conduits. The shape and distribution of the lavas and intrusions were further influenced by the positions of previously or concurrently emplaced units. Magma preferentially invaded the sediment, avoiding the older units or conforming to their margins. Large intrusions and their dewatered envelope may have formed a barrier to the lateral progression and ascent of subsequent batches of magma.  相似文献   

9.
Volcanic fields in the Pannonian Basin, Western Hungary, comprise several Mio/Pliocene volcaniclastic successions that are penetrated by numerous mafic intrusions. Peperite formed where intrusive and extrusive basaltic magma mingled with tuff, lapilli-tuff, and non-volcanic siliciclastic sediments within vent zones. Peperite is more common in the Pannonian Basin than generally realised and may be also important in other settings where sediment sequences accumulate during active volcanism. Hajagos-hegy, an erosional remnant of a maar volcano, was subsequently occupied by a lava lake that interacted with unconsolidated sediments in the maar basin and formed both blocky and globular peperite. Similar peperite developed in Kissomlyó, a small tuff ring remnant, where dykes invaded lake sediments that formed within a tuff ring. Lava foot peperite from both Hajagos-hegy and Kissomlyó were formed when small lava flows travelled over wet sediments in craters of phreatomagmatic volcanoes. At Ság-hegy, a large phreatomagmatic volcanic complex, peperite formed along the margin of a coherent intrusion. All peperite in this study could be described as globular or blocky peperite. Globular and blocky types in the studied fields occur together regardless of the host sediment.  相似文献   

10.
Imbrication, indicating flow and source direction, occurs in three Pleistocene or upper Pliocene pumice-flow tuffs exposed in a 700-km2 area on the east flank of the Cascade Range near Bend, Oregon, and shows the location of previously unknown source vents of these tuffs. The imbrication is formed by inclined elongate and/or flat pumice or lithic fragments and locally by elongate plagioclase crystals. Imbrication is best developed within the lower zones of individual flow units; the pumiceous top zones also locally show imbrication directions parallel to that in the lower zones. Moreover, the areal pattern of size distribution of lithic and pumice fragments in the flows is concordant with the flow direction pattern indicated by imbrication.The upper pumice flow shows a fan-shaped pattern of flow directions indicated by imbrication which points to a western source. A possible vent, about 20 km west of Bend in the highland near Broken Top Volcano, is marked by many silicic domes and basaltic cinder cones where there is a 6–8 mgal negative Bouguer gravity anomaly. In contrast, imbrication in the middle and lower pumice flows indicates flow from a source southwest of Bend. Vents in this direction are not obvious. Possible buried vents are located about 30 km and 45 km southwest of Bend near Sitkum Butte and Lookout Mountain, respectively.  相似文献   

11.
The climax of the Kos Plateau Tuff (KPT) eruption (eastern Aegean, Greece) generated a highly energetic, coarse-grained, lithic-rich, pyroclastic flow. In most places on Kos, the deposit from this event is an ignimbrite (ignimbrite El) that comprises a basal, coarse-grained, lithic breccia and overlying pumiceous part, above a planar, strongly erosional lower contact. However, along the northern coast of central Kos, "normal" ignimbrite El overlies a hummocky, 6-m-thick layer of chaotic breccia comprising mingled-to-pervasively mixed ignimbrite El and unconsolidated sediment. The surface morphology of the chaotic breccia and its internal texture resemble those of a debris-avalanche deposit, but the breccia is neither proximal nor downcurrent of steep topography. The lower part of the chaotic breccia comprises distinct domains of unconsolidated sediment or lower KPT units that are deformed and/or mingled with pumiceous ignimbrite. The upper part is dominated by a matrix of mingled-to-pervasively mixed ignimbrite and sediment that contains sediment domains as large as 2-10 m in diameter. Such large intact allochthonous domains are best preserved at the top of the chaotic breccia and form the hummocks. The chaotic breccia formed synchronously with the passage of a highly energetic pyroclastic flow where it traversed wet, unconsolidated sediment. Shear-induced liquification, together with possible ground shaking associated with the eruption, probably caused failure. Part of the unconsolidated substrate and basal part of ignimbrite El were dislodged and resedimented a short distance (tens to hundreds of metres) downcurrent. The lower part records deformation and disintegration of the substrate induced by the overriding, shearing flow. Mingling and deformation of the poorly consolidated material occurred as a result of within-flow lateral shear. Attenuated worm burrows within the sediment domains, and pinch-and-swell and flame structures within the mingled domains, preserve evidence of shear in the lower part. The upper part was transported downcurrent above a zone of shear failure. Internal heterogeneities in physical properties resulted in variable strain rates causing some domains to be pervasively mixed while others remained intact. Intact large unconsolidated domains at the top were transported mostly above the zone of shearing.  相似文献   

12.
The small- to moderate-volume, Quaternary, Siwi pyroclastic sequence was erupted during formation of a 4 km-wide caldera on the eastern margin of Tanna, an island arc volcano in southern Vanuatu. This high-potassium, andesitic eruption followed a period of effusive basaltic andesite volcanism and represents the most felsic magma erupted from the volcano. The sequence is up to 13 m thick and can be traced in near-continuous outcrop over 11 km. Facies grade laterally from lithic-rich, partly welded spatter agglomerate along the caldera rim to two medial, pumiceous, non-welded ignimbrites that are separated by a layer of lithic-rich, spatter agglomerate. Juvenile clasts comprise a wide range of densities and grain sizes. They vary between black, incipiently vesicular, highly elongate spatter clasts that have breadcrusted pumiceous rinds and reach several metres across to silky, grey pumice lapilli. The pumice lapilli range from highly vesicular clasts with tube or coalesced spherical vesicles to denser finely vesicular clasts that include lithic fragments.Textural and lithofacies characteristics of the Siwi pyroclastic sequence suggest that the first phase of the eruption produced a base surge deposit and spatter-poor pumiceous ignimbrite. A voluminous eruption of spatter and lithic pyroclasts coincided with a relatively deep withdrawal of magma presumably driven by a catastrophic collapse of the magma chamber roof. During this phase, spatter clasts rapidly accumulated in the proximal zone largely as fallout, creating a variably welded and lithic-rich agglomerate. This phase was followed by the eruption of moderately to highly vesiculated magma that generated the most widespread, upper pumiceous ignimbrite. The combination of spatter and pumice in pyroclastic deposits from a single eruption appears to be related to highly explosive, magmatic eruptions involving low-viscosity magmas. The combination also indicates the coexistence of a spatter fountain and explosive eruption plume for much of the eruption.Editorial responsibility: R. Cioni  相似文献   

13.
We present field observations from Bláhnúkur, a small volume (<0.1 km3) subglacial rhyolite edifice at the Torfajökull central volcano, south-central Iceland. Bláhnúkur was probably emplaced during the last glacial period (ca. 115–11 ka). The characteristics of the deposits suggest that they were formed by an effusive eruption in an exclusively subglacial environment, beneath a glacier >400 m thick. Lithofacies associations attest to complex patterns of volcano-ice interaction. Erosive channels at the base of the subglacial sequence are filled by both eruption-derived material and subglacial till, which show evidence for deposition by flowing meltwater. This suggests that meltwater was able to drain away from the vent area during the eruption. Much of the subglacial volcanic deposits consist of conical-to-irregularly shaped lava lobes typically 5–10 m long, set in poorly sorted breccias with an ash-grade matrix. A gradational lavabreccia contact at the base of lava lobes represents a fossilised fragmentation interface, driven by magma-water interaction as the lava flowed over poorly consolidated, waterlogged debris. Sets of columnar joints on the upper surfaces of lobes are interpreted as ice-contact features. The morphology of the lobes suggests that they chilled within conically shaped subglacial cavities 2–5 m high. Avalanche deposits mantling the flanks of Bláhnúkur appear to have been generated by the collapse of lava lobes and surrounding breccia. A variety of deposit characteristics suggests that this occurred both prior to and after quenching of the lava lobes. Collapse events may have occurred when the supporting ice walls were melted back from around the cooling lava lobes and breccias. Much larger lava flows were emplaced in the latter stages of the eruption. Columnar joint patterns suggest that these flowed and chilled within subglacial cavities 20 m high and 100–200 m in length. There is little evidence for magma-water interaction at lava flow margins which suggests that these larger cavities were drained of meltwater. As rhyolite magma rose to the base of the glacier, the nature of the subglacial cavity system played an important role in governing the style of eruption and the volcanic facies generated. We present evidence that the cavity system evolved during the eruption, reflecting variations in both melting rate and edifice growth that are best explained by a fluctuating eruption rate.  相似文献   

14.
Pahoehoe flows interbedded with sediments have been identified in the superior portion of Paraná Continental Flood Basalts (PCFB), west portion of Paraná State, southern Brazil. In the study area peperites are generated by the interaction between lava flows and wet lacustrine sediments (silt and clay). Evidence that the sediments were unconsolidated or poorly consolidated and wet when the lava flowed over them includes vesiculated sediment, sediment in vesicles and fractures in lava flow and in juvenile clasts in the peperite and soft sediment deformation. Hydrodynamic mingling of lava and wet sediments (coarse mingling) is predominant and volcanic rocks and textures related to explosive phase of Molten Fuel Coolant Interaction (MFCI) are not observed in study area. Locally centimeter-sized areas display direct contact between ash-sized juvenile clasts and sediments formed by the collapse of a vapor film. The textures of fluidal peperites in the central PCFB indicate that the relevant factors that led to a coarse mingling between lava/sediment are (1) lava properties (low viscosity); (2) fine grained, unconsolidated or poorly consolidated wet sediment; and (3) a single episode of interaction between lava flows and sediment.  相似文献   

15.
The Middle-Upper Miocene Las Burras–Almagro-El Toro (BAT) igneous complex within the Eastern Cordillera of the central Andes (∼24°S; NW Argentina) has revealed evidence of non-explosive interaction of andesitic magma with water or wet clastic sediments in a continental setting, including peperite generation. We describe and interpret lithofacies and emplacement mechanisms in three case studies. The Las Cuevas member (11.8 Ma) comprises facies related to: (i) andesite extruded in a subaqueous setting and generating lobe-hyaloclastite lava; and (ii) marginal parts of subaerial andesite lava dome(s) in contact with surface water, comprising fluidal lava lobes, hyaloclastite, and juvenile clasts with glassy rims. The Lampazar member (7.8 Ma) is represented by a syn-volcanic andesite intrusion and related peperite that formed within unconsolidated, water-saturated, coarse-grained volcaniclastic conglomerate and breccia. The andesite intrusion is finger-shaped and grades into intrusive pillows. Pillows are up to 2 m wide, tightly packed near the intrusion fingers, and gradually become dispersed in the host sediment ≥50 m from the parent intrusion. The Almagro A member (7.2 Ma) shows evidence of mingling between water-saturated, coarse-grained, volcaniclastic alluvial breccia and intruding andesite magma. The resulting intrusive pillows are characterized by ellipsoidal and tubular shape and concentric structure. The high-level penetration of magma in this coarse sediment was unconfined and irregular. Magma was detached in apophyses and lobes with sharp contacts and fluidal shapes, and without quench fragmentation and formation of a hyaloclastite envelope. The presence of peperite and magma–water contact facies in the BAT volcanic sequence indicates the possible availability of water in the system between 11–7 Ma and suggests a depositional setting in this part of the foreland basin of the central Andes characterized by an overall topographically low coastal floodplain that included extensive wetlands.  相似文献   

16.
 Coarse, co-ignimbrite lithic breccia, Ebx, occurs at the base of ignimbrite E, the most voluminous and widespread unit of the Kos Plateau Tuff (KPT) in Greece. Similar but generally less coarse-grained basal lithic breccias (Dbx) are also associated with the ignimbrites in the underlying D unit. Ebx shows considerable lateral variations in texture, geometry and contact relationships but is generally less than a few metres thick and comprises lithic clasts that are centimetres to a few metres in diameter in a matrix ranging from fines bearing (F2: 10 wt.%) to fines poor (F2: 0.1 wt.%). Lithic clasts are predominantly vent-derived andesite, although clasts derived locally from the underlying sedimentary formations are also present. There are no proximal exposures of KPT. There is a highly irregular lower erosional contact at the base of ignimbrite E at the closest exposures to the inferred vent, 10–14 km from the centre of the inferred source, but no Ebx was deposited. From 14 to <20 km from source, Ebx is present over a planar erosional contact. At 16 km Ebx is a 3-m-thick, coarse, fines-poor lithic breccia separated from the overlying fines-bearing, pumiceous ignimbrite by a sharp contact. This grades downcurrent into a lithic breccia that comprises a mixture of coarse lithic clasts, pumice and ash, or into a thinner one-clast-thick lithic breccia that grades upward into relatively lithic-poor, pumiceous ignimbrite. Distally, 27 to <36 km from source Ebx is a finer one-clast-thick lithic breccia that overlies a non-erosional base. A downcurrent change from strongly erosional to depositional basal contacts of Ebx dominantly reflects a depletive pyroclastic density current. Initially, the front of the flow was highly energetic and scoured tens of metres into the underlying deposits. Once deposition of the lithic clasts began, local topography influenced the geometry and distribution of Ebx, and in some cases Ebx was deposited only on topographic crests and slopes on the lee-side of ridges. The KPT ignimbrites also contain discontinuous lithic-rich layers within texturally uniform pumiceous ignimbrite. These intra-ignimbrite lithic breccias are finer grained and thinner than the basal lithic breccias and overlie non-erosional basal contacts. The proportion of fine ash within the KPT lithic breccias is heterogeneous and is attributed to a combination of fluidisation within the leading part of the flow, turbulence induced locally by interaction with topography, flushing by steam generated by passage of pyroclastic density currents over and deposition onto wet mud, and to self-fluidisation accompanying the settling of coarse, dense lithic clasts. There are problems in interpreting the KPT lithic breccias as conventional co-ignimbrite lithic breccias. These problems arise in part from the inherent assumption in conventional models that pyroclastic flows are highly concentrated, non-turbulent systems that deposit en masse. The KPT coarse basal lithic breccias are more readily interpreted in terms of aggradation from stratified, waning pyroclastic density currents and from variations in lithic clast supply from source. Received: 21 April 1997 / Accepted: 4 October 1997  相似文献   

17.
Textural characterization of pumice clasts from explosive volcanic eruptions provides constraints on magmatic processes through the quantification of crystal and vesicle content, size, shape, vesicle wall thickness and the degree of interconnectivity. The Plinian fallout deposit directly underlying the Campanian Ignimbrite (CI) eruption represents a suitable case to investigate pumice products with different textural characteristics and to link the findings to processes accompanying conduit magma ascent to the crater. The deposit consists of a lower (LFU) and upper (UFU) pumice lapilli bed generated by the sub-steady eruption of trachytic magma with <5 vol%. crystals and a peak discharge rate of 3.2×10 8 kg/s. Density measurements were performed on samples collected from different stratigraphic intervals at the Voscone-type outcrop, and their textural characteristics were investigated at different magnifications through image analysis techniques. According to clast densities, morphologies and vesicle textures pumice clasts were classified into microvesicular (heterogeneous vesicles), tube (elongated/deformed vesicles) and expanded (coalesced/inflated vesicles).The combination of density data and textural investigations allowed us to characterize both representative areas and textural extremes of pumice products. Bulk vesicularity spans a broad interval varying from 0.46 to >0.90, with vesicle number density ranging from 10 7–10 8 cm -3. The degree of vesicle coalescence is high for all pumice types, with interconnected vesicles generally representing more than 90% of the bulk vesicle population. The results show a high degree of heterogeneous textures among pumice clasts from both phases of the eruption and within each eruption phase, the different pumice types and also within each single pumice type fragment. The origin of pumice clasts with different textural characteristics is ascribed to the development of conduit regions marked by different rheological behavior. The conclusions of this study are that vesicle deformation, degree of coalescence and intense shear at the conduit walls play a major role on the degassing process, hence affecting the entire conduit dynamics.  相似文献   

18.
Mechanisms of bubble coalescence in silicic magmas   总被引：1，自引：1，他引：0  
Bubble coalescence is an important process that strongly affects magmatic degassing. Without coalescence, bubbles remain isolated from one another in the melt, severely limiting gas release. Despite this fact, very little has been done to identify coalescence mechanisms from textures of magmatic rocks or to quantify the dynamics of bubble coalescence in melts. In this paper, we present a systematic study of bubble-coalescence mechanisms and dynamics in natural and experimentally produced bubbly rhyolite magma. We have used a combination of natural observations aided by high-resolution X-ray computed tomography, petrological experiments, and physical models to identify different types of bubble?Cbubble interaction that lead to coalescence on the timescales of magma ascent and eruption. Our observations and calculations suggest that bubbles most efficiently coalesce when inter-bubble melt walls thin by stretching rather than by melt drainage from between converging bubble walls. Orders of magnitude are more rapid than melt drainage, bubble wall stretching produces walls thin enough that inter-bubble pressure gradients may cause the melt wall to dimple, further enhancing coalescence. To put these results into volcanogical context, we have identified magma ascent conditions where each coalescence mechanism should act, and discuss the physical conditions for preserving coalescence structures in natural pumice. The timescales we propose could improve volcanic eruption models, which currently do not account for bubble coalescence. Although we do not address the effect of shear strain on bubble coalescence, the processes discussed here may operate in several different eruption regimes, including vesiculation of lava domes, post-fragmentation frothing of vulcanian bombs, and bubbling of pyroclasts in conduits.  相似文献   

19.
The vesicularity, permeability, and structure of pumice clasts provide insight into conditions of vesiculation and fragmentation during Plinian fall and pyroclastic flow-producing phases of the ~7,700 cal. year B.P. climactic eruption of Mount Mazama (Crater Lake), Oregon. We show that bulk properties (vesicularity and permeability) can be correlated with internal textures and that the clast structure can be related to inferred changes in eruption conditions. The vesicularity of all pumice clasts is 75-88%, with >90% interconnected pore volume. However, pumice clasts from the Plinian fall deposits exhibit a wider vesicularity range and higher volume percentage of interconnected vesicles than do clasts from pyroclastic-flow deposits. Pumice permeabilities also differ between the two clast types, with pumice from the fall deposit having higher minimum permeabilities (~5᎒-13 m2) and a narrower permeability range (5-50᎒-13 m2) than clasts from pyroclastic-flow deposits (0.2-330᎒-13 m2). The observed permeability can be modeled to estimate average vesicle aperture radii of 1-5 µm for the fall deposit clasts and 0.25-1 µm for clasts from the pyroclastic flows. High vesicle number densities (~109 cm-3) in all clasts suggest that bubble nucleation occurred rapidly and at high supersaturations. Post-nucleation modifications to bubble populations include both bubble growth and coalescence. A single stage of bubble nucleation and growth can account for 35-60% of the vesicle population in clasts from the fall deposits, and 65-80% in pumice from pyroclastic flows. Large vesicles form a separate population which defines a power law distribution with fractal dimension D=3.3 (range 3.0-3.5). The large D value, coupled with textural evidence, suggests that the large vesicles formed primarily by coalescence. When viewed together, the bulk properties (vesicularity, permeability) and textural characteristics of all clasts indicate rapid bubble nucleation followed by bubble growth, coalescence and permeability development. This sequence of events is best explained by nucleation in response to a downward-propagating decompression wave, followed by rapid bubble growth and coalescence prior to magma disruption by fragmentation. The heterogeneity of vesicle sizes and shapes, and the absence of differential expansion across individual clasts, suggest that post-fragmentation expansion played a limited role in the development of pumice structure. The higher vesicle number densities and lower permeabilities of pyroclastic-flow clasts indicate limited coalescence and suggest that fragmentation occurred shortly after decompression. Either increased eruption velocities or increased depth of fragmentation accompanying caldera collapse could explain compression of the pre-fragmentation vesiculation interval.  相似文献   

20.
The submarine Healy volcano (southern Kermadec arc), with a 2-2.5 km wide caldera, is pervasively mantled with highly vesicular silicic pumice within a water depth of 1,150-1,800 m. Pumices comprise type 1 white-light grey pumice with ⢾ mm vesicles and weak-moderate foliation, type 2 grey pumice with millimetre-scale laminae, flow banded foliation, including stretched vesicles ⣗ mm in length, and a minor finely vesicular type 3 pumice. All types are sparsely porphyritic, with undevitrified glassy groundmass (68-70% SiO2), which is microlite and lithic free. Coexisting pyroxenes yield magma temperatures of ~950 °C. Pumice density is А.5 g cm-3 and vesicularity is 78-83%. Vesicle size distributions for types 1 and 2 pumice, range from ~20 µm to >20 mm, with a strong power-law relation (with d=-2.5ǂ.4) for vesicles <1-2 mm. Larger vesicles have variable size modes. The vesicle size distribution and packing indicates rapid magma decompression and ascent. Consideration of the pressure dependent, solubility of H2O at a magma temperature of 𙧶 °C and water content of Ж wt%, with pumice petrography and vesicle granulometry, strongly suggests a pyroclastic eruption. Reconstructions of the submarine edifice between water depths of 1,000 and 550 m constrain the ambient hydrostatic pressure to ~6-9 MPa. Pressures >~9 MPa will limit vesicularity to less than the observed 78-83%, whereas pressure <~6 MPa require a more shallower reconstruction of the edifice and larger-volume syn-eruptive collapse. Uniformly high vesicularity is interpreted as evidence of insulation within an eruption column comprising steam and hot pyroclasts. Most pyroclasts cool, condensing and ingesting water into steam-inflated vesicles, and then sink. Progression into pyroclastic mode would expand the eruption column, displace ambient water, reduce the hydrostatic load, and further promote vesiculation and fragmentation. Pyroclasts within the column would quench at these reduced pressures. We argue that Healy eruptions deeper than ~1,000 m cannot be pyroclastic. Volumes for the lower and upper bounds of edifice size are 2.36 and 3.58 km3, respectively, but do not account for intra-caldera pumice fill. These volumes are considered to be predominantly primary eruption output, as shown by a dearth of accessory lithics in all pumice, yielding (at an average 81% vesicularity) eruptive pumice volumes of between 10 and 15 km3. Some pyroclasts may have risen to the sea surface and be a correlative of the sea-rafted Loisels pumice; the latter occurs in some New Zealand Holocene beach sequences and has a estimated age of 590ᇤ calendar years.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号