Experimental study of nickel(II) interaction with calcite: Adsorption and coprecipitation     

L.Z. Lakshtanov  S.L.S. Stipp 《Geochimica et cosmochimica acta》2007,71(15):3686-3697

Partitioning of Ni in calcite, CaCO₃, was evaluated with the aim of collecting data on partition and distribution coefficients and to enhance understanding about the interaction of Ni with the calcite surface and further incorporation into the bulk. This information will aid in the interpretation of geological processes for safety assessment of waste repositories and contamination of groundwater. Coprecipitation experiments were carried out by the constant addition method at 25 °C and pCO₂ = 1 and 10^−3.5 atm. Ni was moderately partitioned from solution into calcite. For dilute solid solutions (X_Ni < 0.001), Ni partition coefficients were estimated to be ∼1 and found to be weakly dependent on calcite precipitation rate in the range of 3-230 nmol m⁻² s⁻¹. Ni molar fraction in the solid is directly proportional to Ni concentration in the solution. The fit of the data to such a model is good evidence that Ni is taken up as a true solid solution, not simply by physical trapping.  相似文献   

Degradation of dissolved organic monomers and short-chain fatty acids in sandy marine sediment by fermentation and sulfate reduction     

Thomas Valdemarsen  Erik Kristensen 《Geochimica et cosmochimica acta》2010,74(5):1593-1605

The decay of a wide range of organic monomers (short-chain volatile fatty acids (VFA’s), amino acids, glucose and a pyrimidine) was studied in marine sediments using experimental plug flow-through reactors. The reactions were followed in the presence and absence of 10 mM SO₄²⁻. Degradation stoichiometry of individual monomers (inflow concentration of 6 mM organic C) was traced by measuring organic (VFA’s, amino acids) and inorganic (CO₂, NH₄⁺, SO₄²⁻) compounds in the outflow. Fermentation of amino acids was efficient and complete during passage through anoxic sediment reactors. Aliphatic amino acids (alanine, serine and glutamate) were primarily recovered as CO₂ (24-34%), formate (3-22%) and acetate (41-83%), whereas only ∼1/3 of the aromatic amino acid (tyrosine) was recovered as CO₂ (13%) and acetate (20%). Fermentation of glucose and cytosine was also efficient (78-86%) with CO₂ (30-35%), formate (3%) and acetate (28-33%) as the primary products. Fermentation of VFA’s (acetate, propionate and butyrate), on the other hand, appeared to be product inhibited. The presence of SO₄²⁻ markedly stimulated VFA degradation (29-45% efficiency), and these compounds were recovered as CO₂ (17% for butyrate to 100% for acetate) and acetate (51% and 82% for propionate and butyrate, respectively). When reaction stoichiometry during fermentation is compared with compound depletion during sulfate reduction, the higher proportion CO₂ recovery is consistent with lower acetate and formate accumulation. Our results therefore suggest that fermentation reactions mediate the initial degradation of added organic compounds, even during active sulfate reduction. Fermentative degradation stoichiometry also suggested significant H₂ production, and >50% of sulfate reduction appeared to be fuelled by H₂. Furthermore, our results suggest that fermentation was the primary deamination step during degradation of the amino acids and cytosine.  相似文献   

The energetics of nanophase calcite     

Tori Z. Forbes 《Geochimica et cosmochimica acta》2011,75(24):7893-7905

Calcium carbonate (CaCO₃) is an important component of the near-surface environment. Understanding the nature of its precipitation is important for a variety of environmental processes, as well as for the geologic sequestration of anthropogenic carbon dioxide. Calcite is the most thermodynamically stable bulk polymorph, but energy crossovers may exist that could favor the precipitation of vaterite or aragonite with decreasing particle size. The purpose of this study is to determine the surface energy of calcite, which is the first step towards understanding the effect of particle size on thermodynamic stability in the calcium carbonate system. The enthalpies of five well-characterized calcite samples (four nanophase and one bulk) were measured by acid solution isothermal and water adsorption calorimetric techniques. From the calorimetric data, the surface energies of calcite were determined to be 1.48 ± 0.21 and 1.87 ± 0.16 J/m² for hydrous and anhydrous surfaces. These values are similar to those measured for many oxides but larger than predicted from computational models for idealized calcite surfaces. The surfaces of synthetic CaCO₃ particles contain a range of planes and defect structures, which may give rise to the difference between the experimental and modeled values.  相似文献   

The oxidation state of sulfur in synthetic and natural glasses determined by X-ray absorption spectroscopy   总被引：1，自引：0，他引：1  

Nicole Métrich  Andrew J. Berry  Jean Susini 《Geochimica et cosmochimica acta》2009,73(8):2382-7631

Sulfur K-edge X-ray absorption near edge structure (XANES) spectra were recorded for experimental glasses of various compositions prepared at different oxygen fugacities (fO₂) in one-atmosphere gas-mixing experiments at 1400 °C. This sample preparation method only results in measurable S concentrations under either relatively reduced (log fO₂ < −9) or oxidised (log fO₂ > −2) conditions. The XANES spectra of the reduced samples are characterised by an absorption edge crest at 2476.4 eV, typical of S²⁻. In addition, spectra of Fe-bearing compositions exhibit a pronounced absorption edge shoulder. Spectra for all the Fe-free samples are essentially identical, as are the spectra for the Fe-bearing compositions, despite significant compositional variability within each group. The presence of a sulfide phase, such as might exsolve on cooling, can be inferred from a pre-edge feature at 2470.5 eV.The XANES spectra of the oxidised samples are characterised by an intense transition at 2482.1 eV, typical of the sulfate anion SO₄²⁻. Sulfite (SO₃²⁻) has negligible solubility in silicate melts at low pressures. The previous identification of sulfite species in natural glass samples is attributed to an artefact of the analysis (photoreduction of S⁶⁺). S⁴⁺ does, however, occur unambiguously with S⁶⁺ in Fe-free and Fe-poor compositions prepared in equilibrium with CaSO₄ at 4-16 kbar, and when buffered with Re/ReO₂ at 10 kbar. Solubility of S⁴⁺ thus requires partial pressures of SO₂ considerably in excess of 1 bar. A number of experiments were undertaken in an attempt to access intermediate fO₂s more applicable to terrestrial volcanism. Although these were largely unsuccessful, S²⁻ and S⁶⁺ were found to coexist in some samples that were not in equilibrium with the imposed fO₂.The XANES spectra of natural olivine-hosted melt inclusions and submarine glasses representative of basalts at, or close to, sulfide saturation show mainly dissolved S²⁻, but with minor sulfate, and additionally a peak at 2469.5 eV, which, although presumably due to immiscible sulfide, is 1 eV lower than that typical of FeS. These sulfate and sulfide-related peaks disappear with homogenisation of the inclusions by heating to 1200 °C followed by rapid quenching, suggesting that both these features are a result of cooling under natural conditions. The presence of small amounts of sulfate in otherwise reduced basaltic magmas may be explained by the electron exchange reaction: S²⁻ + 8Fe³⁺ = S⁶⁺ + 8Fe²⁺, which is expected to proceed strongly to the right with decreasing temperature. This reaction would explain why S²⁻ and S⁶⁺ are frequently found together despite the very limited fO₂ range over which they are thermodynamically predicted to coexist. The S XANES spectra of water-rich, highly oxidised, basaltic inclusions hosted in olivine from Etna and Stromboli confirm that nearly all S is dissolved as sulfate, explaining their relatively high S contents.  相似文献   

C-O bonds in carbonate minerals: A new kind of paleothermometer     

Prosenjit Ghosh  Jess Adkins  Brian Balta  Edwin A. Schauble  John M. Eiler 《Geochimica et cosmochimica acta》2006,70(6):1439-1456

The abundance of the doubly substituted CO₂ isotopologue, ¹³C¹⁸O¹⁶O, in CO₂ produced by phosphoric acid digestion of synthetic, inorganic calcite and natural, biogenic aragonite is proportional to the concentration of ¹³C-¹⁸O bonds in reactant carbonate, and the concentration of these bonds is a function of the temperature of carbonate growth. This proportionality can be described between 1 and 50 °C by the function: Δ₄₇ = 0.0592 · 10⁶ · T⁻² − 0.02, where Δ₄₇ is the enrichment, in per mil, of ¹³C¹⁸O¹⁶O in CO₂ relative to the amount expected for a stochastic (random) distribution of isotopes among all CO₂ isotopologues, and T is the temperature in Kelvin. This relationship can be used for a new kind of carbonate paleothermometry, where the temperature-dependent property of interest is the state of ordering of ¹³C and ¹⁸O in the carbonate lattice (i.e., bound together vs. separated into different CO₃²⁻ units), and not the bulk δ¹⁸O or δ¹³C values. Current analytical methods limit precision of this thermometer to ca. ± 2 °C, 1σ. A key feature of this thermometer is that it is thermodynamically based, like the traditional carbonate-water paleothermometer, and so is suitable for interpolation and even modest extrapolation, yet is rigorously independent of the δ¹⁸O of water and δ¹³C of DIC from which carbonate grew. Thus, this technique can be applied to parts of the geological record where the stable isotope compositions of waters are unknown. Moreover, simultaneous determinations of Δ₄₇ and δ¹⁸O for carbonates will constrain the δ¹⁸O of water from which they grew.  相似文献