首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 101 毫秒
1.
The textures and mineral chemistries of silicate inclusions in the Udei Station (IAB) and Miles (fractionated IIE) iron meteorites were studied using optical and electron microscopy, SEM, EMPA, and LA-ICP-MS techniques to better understand the origin of silicate-bearing irons. Inclusions in Udei Station include near-chondritic, basaltic/gabbroic, feldspathic orthopyroxenitic, and harzburgitic lithologies. In Miles, most inclusions can be described as feldspathic pyroxenite or pyroxene-enriched basalt/gabbro. The trace-element compositions of both orthopyroxene and plagioclase grains are similar in different lithologies from Udei Station; whereas in different inclusions from Miles, the compositions of orthopyroxene grains are similar, while those of clinopyroxene, plagioclase, and especially Cl-apatite are variable. Orthopyroxene in Miles tends to be enriched in REE compared to that in Udei Station, but the reverse is true for plagioclase and clinopyroxene.The data can be explained by models involving partial melting of chondritic protoliths, silicate melt migration, and redox reactions between silicate and metal components to form phosphate. The extent of heating, melt migration, and phosphate formation were all greater in Miles. Silicates in Miles were formed from liquids produced by ∼30% partial melting of a chondritic precursor brought to a peak temperature of ∼1250 °C. This silicate melt crystallized in two stages. During Stage 1, crystallizing minerals (orthopyroxene, clinopyroxene, chromite, and olivine) were largely in equilibrium with an intercumulus melt that was evolving by igneous fractionation during slow cooling, with a residence time of ∼20 ka at ∼1150 °C. During Stage 2, following probable re-melting of feldspathic materials, and after the silicate “mush” was mixed with molten metal, plagioclase and phosphate fractionally crystallized together during more rapid cooling down to the solidus. In Udei Station, despite a lower peak temperature (<1180 °C) and degree of silicate partial melting (∼3-10%), silicate melt was able to efficiently separate from silicate solid to produce melt residues (harzburgite) and liquids or cumulates (basalt/gabbro, feldspathic orthopyroxenite) prior to final metal emplacement. Olivine was generally out of equilibrium with other minerals, but orthopyroxene and plagioclase largely equilibrated under magmatic conditions, and clinopyroxene in basalt/gabbro crystallized from a more evolved silicate melt.We suggest that a model involving major collisional disruption and mixing of partly molten, endogenically heated planetesimals can best explain the data for IAB and fractionated IIE silicate-bearing irons. The extent of endogenic heating was different (less for the IABs), and the amount of parent body disruption was different (scrambling with collisional unroofing for the IAB/IIICD/winonaite body, more complete destruction for the fractionated IIE body), but both bodies were partly molten and incompletely differentiated at the time of impact. We suggest that the post-impact secondary body for IAB/IIICD/winonaite meteorites was mineralogically zoned with Ni-poor metal in the center, and that the secondary body for fractionated IIE meteorites was a relatively small melt-rich body that had separated from olivine during collisional break-up.  相似文献   

2.
Diogenites are orthopyroxenites and harzburgites that are petrogenetically associated with basaltic magmatism linked to the earliest stages of asteroidal melting on the parent body for the howardite-eucrite-diogenite (HED) meteorites. There are several models proposed for their origin: (1) accumulation of orthopyroxene (OPX) + chromite (CHR) ± olivine (OL) during the crystallization of a magma ocean during the initial stages of asteroidal differentiation, (2) accumulation of OPX + CHR ± OL during the crystallization of compositionally distinct basaltic magmas emplaced into the crust of the HED parent body, and (3) the orthopyroxenites formed by the crystallization of basaltic magmas within the HED parent body crust, whereas the harzburgites represent the mantle of the HED parent body. Although OL and OPX experienced varying degrees of subsolidus reequilibration (1100-700 °C), their minor and trace element characteristics appear to partially preserve magmatic signatures that provide insights into distinguishing among different models for the origin of diogenites. The OPX exhibits a continuous and very systematic variation in incompatible elements such as Al, Ti, Zr, Y, and Yb. Polymict diogenites (i.e. Roda, EET 79002) can contain distinct lithologies with both different incompatible element characteristics and different model abundances of OL. There appears to be no relationship between the appearance and abundance of OL and the incompatible element characteristics of the OPX. The OL exhibits a range in Mg# and systematic variations Ni, Co, Ni/Co, and Mn. For examples, low Ni/Co appears to be closely associated with the harzburgites and Ni and Mn exhibit a negative correlation. Surprisingly, incompatible element concentrations in OPX are not negatively correlated to Ni concentrations in OL. The continuous nature of the minor and trace element characteristics of the OPX and OL is consistent with the all the diogenite lithologies forming through a single process such as crystallization within a magma ocean or a series of layered intrusions. Further, the range in incompatible element variability in the OPX, the Ni and Co systematics in the OL, and the association of distinctly different lithologies within polymict diogenites are most consistent with the diogenites representing lithologies from diverse layered intrusions. Alternatively, they may represent crystallization products of a magma ocean much more complex than has been thus far proposed (i.e. multiple MOs). There are some distinct differences between diogenites and the OL-rich achondrite QUE 93148 that was also analyzed during this study. These differences (such as Ni/Co in OL, estimated conditions of fO2) suggest that QUE 93148 is closely related to main-group pallasites rather than the parent bodies for the HED meteorites.  相似文献   

3.
Studies of meteorites are based mostly on samples that fell to Earth in the recent past (i.e., a few million years at most). The Morokweng LL-chondrite meteorite is a particularly interesting specimen as its fall is much older (ca. 145 Ma) than most other meteorites and because it is the only macro-meteorite clast (width intersected in drill core: 25 cm) found in a melt sheet of a large impact structure. When applied to the Morokweng meteorite, 40Ar/39Ar thermochronology provides an opportunity to study (1) effects associated with pre-impact and post-impact processes and (2) collision events within a potentially distinct and as yet unsampled asteroid population.A single multi-grain aliquot yielded an inverse isochron age of 625 ± 163 Ma. This suggests a major in-space collisional event at this time. We have modeled the diffusion of 40Ar within the meteorite and plagioclase during and after the ∼145 Ma impact on Earth to tentatively explain why pre-terrestrial impact 40Ar has been preserved within the plagioclase grains. The ∼145 Ma terrestrial impact age is recorded in the low-retentivity sites of the meteorite plagioclase grains that yielded a composite inverse isochron age at 141 ± 15 Ma and thus, confirms that age information about major (terrestrial or extraterrestrial) impacts can be recorded in the K-rich mineral phases of a meteorite and measured by the 40Ar/39Ar technique. More studies on fossil meteorites need to be carried out to understand if the rough 0.6 Ga age proposed here corresponds to major LL-chondrite asteroid population destructions or, rather, to an isolated collision event.  相似文献   

4.
Silicate-bearing iron meteorites differ from other iron meteorites in containing variable amounts of silicates, ranging from minor to stony-iron proportions (∼50%). These irons provide important constraints on the evolution of planetesimals and asteroids, especially with regard to the nature of metal–silicate separation and mixing. I present a review and synthesis of available data, including a compilation and interpretation of host metal trace-element compositions, oxygen-isotope compositions, textures, mineralogy, phase chemistries, and bulk compositions of silicate portions, ages of silicate and metal portions, and thermal histories. Case studies for the petrogeneses of igneous silicate lithologies from different groups are provided. Silicate-bearing irons were formed on multiple parent bodies under different conditions. The IAB/IIICD irons have silicates that are mainly chondritic in composition, but include some igneous lithologies, and were derived from a volatile-rich asteroid that underwent small amounts of silicate partial melting but larger amounts of metallic melting. A large proportion of IIE irons contain fractionated alkali-silica-rich inclusions formed as partial melts of chondrite, although other IIE irons have silicates of chondritic composition. The IIEs were derived from an H-chondrite-like asteroid that experienced more significant melting than the IAB asteroid. The two stony-iron IVAs were derived from an extensively melted and apparently chemically processed L or LL-like asteroid that also produced a metallic core. Ungrouped silicate-bearing irons were derived from seven additional asteroids. Hf–W age data imply that metal–silicate separation occurred within 0–10 Ma of CAI formation for these irons, suggesting internal heating by 26Al. Chronometers were partly re-set at later times, mainly earlier for the IABs and later for the IIEs, including one late (3.60 ± 0.15 Ga) strong impact that affected the “young silicate” IIEs Watson (unfractionated silicate, and probable impact melt), Netschaëvo (unfractionated, and metamorphosed), and Kodaikanal (fractionated). Kodaikanal probably did not undergo differentiation in this late impact, but the similar ages of the “young silicate” IIEs imply that relatively undifferentiated and differentiated materials co-existed on the same asteroid. The thermal histories and petrogeneses of fractionated IIE irons and IVA stony irons are best accommodated by a model of disruption and reassembly of partly molten asteroids.  相似文献   

5.
We develop a physical model of the thermal history of the ureilite parent body (UPB) that numerically tracks the history of its heating, hydration, dehydration, partial melting and smelting as a function of its formation time and the initial values of its composition, formation temperature and water ice content. Petrologic and chemical data from the main group (non-polymict) ureilite meteorites, which sample the interior of the UPB between depths corresponding to pressures in the range 3-10 MPa, are used to constrain the model. We find that to achieve the ∼30% melting inferred for ureilites from all sampled depths, the UPB must have had a radius between ∼80 and ∼130 km and must have accreted about 0.55 Ma after CAI formation. Melting began in the body at ∼1 Ma after CAI, and the time at which 30% melting was reached varied with depth in the asteroid but was always between ∼4.5 and ∼5.8 Ma after CAI. The total rate at which melt was produced in the UPB varied from more than 100 m3 s−1 in the very early stages of melting at ∼1 Ma after CAI to ∼5 m3 s−1 between 2 and 3 Ma after CAI, decreasing to extremely small values as the end of melting was approached beyond ∼5 Ma. Although the initial period of high melt production occupied only a short time around 1 Ma after CAI, it corresponded to ∼half (16%) of total silicate melting, and all strictly basaltic (i.e. plagioclase-saturated) melts must have been produced during this period.A very efficient melt transport network, consisting of a hierarchy of veins and larger pathways (dikes), developed quickly at the start of melting, ensuring rapid (timescales of months) transport of any single parcel of melt to shallow levels, thus ensuring that chemical interaction between melts and the rocks through which they subsequently passed was negligible. Volatile (mainly carbon monoxide) production due to smelting began at the start of silicate melting in the shallowest parts of the UPB and at later times at greater depths. Except at the very start and very end of melting, the volatile content of the melts produced was always high - generally between 15 and 35 mass % - and most of the melt produced was erupted at the surface of the UPB with speeds well in excess of the escape velocity and was lost into space. However, we show that 30% melting at the 3 MPa pressure level was only possible if ∼15% of the total melt produced in the asteroid was retained as a small number (∼5) of very extensive, sill-like intrusions centered at a depth of ∼7 km below the surface, near the base of the ∼8 km thick outer crust of the asteroid that was maintained at temperatures below the basalt solidus by conductive heat loss to the surface. The horizontal extents of these sills occupied about 75% of the surface area of the UPB, and the sills acted as buffers between the steady supply of melt from depth and the intermittent explosive eruption of the melt into space. We infer that samples from these intrusions are preserved as the rare feldspathic (loosely basaltic) clasts in polymict ureilites, and show that the cooling histories of the sills are consistent with these clasts reaching isotopic closure at ∼5 Ma after CAI, as given by 26Al-26Mg, 53Mn-53Cr and Pb-Pb age dates.  相似文献   

6.
Portales Valley, Sombrerete, and Northwest Africa (NWA) 176 are three unrelated meteorites, which consist of silicate mixed with substantial amounts of metal and which likely formed at elevated temperatures as a consequence of early impacts on their parent bodies. Measured 39Ar-40Ar ages of these meteorites are 4477 ± 11 Ma and 4458 ± 16 Ma (two samples of Portales Valley), 4541 ± 12 Ma, and 4524 ± 13 Ma, respectively (Ma = million years; all one-sigma errors). The Ar-Ar data for Portales Valley show no evidence of later open system behavior suggested by some other chronometers. Measured 129I-129Xe ages of these three meteorites are 4559.9 ± 0.5 Ma, 4561.9 ± 1.0 Ma, and ∼4544 Ma, respectively (relative to Shallowater = 4562.3 ± 0.4 Ma). From stepwise temperature release data, we determined the diffusion characteristics for Ar and Xe in our samples and calculated approximate closure temperatures for the K-Ar and I-Xe chronometers. Adopting results and interpretations about these meteorites from some previous workers, we evaluated all these data against various thermal cooling models. We conclude that Portales Valley formed 4560 Ma ago, cooled quickly to below the I-Xe closure temperature, then cooled deep within the parent body at a rate of ∼4 °C/Ma through K-Ar closure. We conclude that Sombrerete formed 4562 Ma ago and cooled relatively quickly. NWA 176 likely formed and cooled quickly ∼4544 Ma ago, or later than formation times of most meteorite parent bodies. For all three meteorites, the Ar-Ar ages are in better agreement with I-Xe ages and preferred thermal models if we increase these Ar-Ar ages by ∼20 Ma. Such age corrections would be consistent with probable errors in 40K decay parameters in current use, as suggested by others. The role of impact heating and possible disruption and partial reassembly of meteorite parent bodies to form some meteorites likely was an important process in the early solar system.  相似文献   

7.
To better understand the role of aqueous alteration on the CR chondrite parent asteroid, a whole-rock oxygen isotopic study of 20 meteorites classified as Renazzo-like carbonaceous chondrites (CR) was conducted. The CR chondrites analyzed for their oxygen isotopes were Dhofar 1432, Elephant Moraine (EET) 87770, EET 92042, EET 96259, Gao-Guenie (b), Graves Nunataks (GRA) 95229, GRA 06100, Grosvenor Mountains (GRO) 95577, GRO 03116, LaPaz Ice Field (LAP) 02342, LAP 04720, Meteorite Hills (MET) 00426, North West Africa (NWA) 801, Pecora Escarpment (PCA) 91082, Queen Alexandra Range (QUE) 94603, QUE 99177, and Yamato-793495 (Y-793495). Three of the meteorites, Asuka-881595 (A-881595), GRA 98025, and MET 01017, were found not to be CR chondrites. The remaining samples concur petrographically and with the well-established oxygen-isotope mixing line for the CR chondrites. Their position along this mixing line is controlled both by the primary oxygen-isotopic composition of their individual components and their relative degree of aqueous alteration. Combined with literature data and that of this study, we recommend the slope for the CR-mixing line to be 0.70 ± 0.04 (2σ), with a δ17O-intercept of −2.23 ± 0.14 (2σ).Thin sections of Al Rais, Shi?r 033, Renazzo, and all but 3 samples analyzed for oxygen isotopes were studied petrographically. The abundance of individual components is heterogeneous among the CR chondrites, but FeO-poor chondrules and matrix are the most abundant constituents and therefore, dominate the whole-rock isotopic composition. The potential accreted ice abundance, physico-chemical conditions of aqueous alteration (e.g. temperature and composition of the fluid) and its duration control the degree of alteration of individual CR chondrites. Combined with literature data, we suggest that LAP 02342 was exposed to lower temperature fluid during alteration than GRA 95229. With only two falls, terrestrial alteration of the CR chondrites complicates the interpretation of their whole rock isotopic composition, particularly in the most aqueously altered samples, and those with relatively higher matrix abundances. We report that QUE 99177 is the isotopically lightest whole rock CR chondrite known (δ18O = −2.29‰, δ17O = −4.08‰), possibly due to isotopically light unaltered matrix; which shows that the anhydrous component of the CR chondrites is isotopically lighter than previously thought. Although it experienced aqueous alteration, QUE 99177 provides the best approximation of the pristine CR-chondrite parent body’s oxygen-isotopic composition, before aqueous alteration took place. Using this value as a new upper limit on the anhydrous component of the CR chondrites, water/rock ratios were recalculated and found to be higher than previously thought; ratios now range from 0.281 to 1.157. We also find that, according to their oxygen isotopes, a large number of CR chondrites appear to be minimally aqueously altered; although sample heterogeneity complicates this interpretation.  相似文献   

8.
Chromite is the only common meteoritic mineral surviving long-term exposure on Earth, however, the present study of relict chromite from numerous Ordovician (470 Ma) fossil meteorites and micrometeorites from Sweden, reveals that when encapsulated in chromite, other minerals can survive for hundreds of millions of years maintaining their primary composition. The most common minerals identified, in the form of small (<1-10 μm) anhedral inclusions, are olivine and pyroxene. In addition, sporadic merrillite and plagioclase were found.Analyses of recent meteorites, holding both inclusions in chromite and corresponding matrix minerals, show that for olivine and pyroxene inclusions, sub-solidus re-equilibration between inclusion and host chromite during entrapment has led to an increase in chromium in the former. In the case of olivine, the re-equilibration has also affected the fayalite (Fa) content, lowering it with an average of 14% in inclusions. For Ca-poor pyroxene the ferrosilite (Fs) content is more or less identical in inclusions and matrix. By these studies an analogue to the commonly applied classification system for ordinary chondritic matrix, based on Fa in olivine and Fs in Ca-poor pyroxene, can be established also for inclusions in chromite. All olivine and Ca-poor pyroxene inclusions (>1.5 μm) in chromite from the Ordovician fossil chondritic material plot within the L-chondrite field, which is in accordance with previous classifications. The concordance in classification together with the fact that inclusions are relatively common makes them an accurate and useful tool in the classification of extraterrestrial material that lacks matrix silicates, such as fossil meteorites and sediment-dispersed chromite grains originating primarily from decomposed micrometeorites but also from larger impacts.  相似文献   

9.
Ion microprobe studies of magnesium isotopic composition in igneous components from several chondritic meteorites have been carried out to look for26Mg excess that may be attributed to the presence of the now-extinct radionuclide26Al(τ ∼ 1 Ma) at the time of formation of these objects. A positive evidence for the presence of26Al in the analysed objects will strengthen its case as the primary heat source for the early thermal metamorphism/melting of meteorite parent bodies. Based on calculated temperature profiles inside chondritic objects of different sizes and initial26Al/27Al ratios, we have estimated the initial abundances of26Al needed to provide the heat necessary for the wide range of thermal processing seen in various types of meteorites. The magnesium isotopic data obtained by us do not provide definitive evidence for the presence of26Al at the time of formation of the analysed igneous phases in different chondritic meteorites. Experimental evidence for a planetary scale distribution of26Al in the early solar system to serve as a significant heat source for the thermal metamorphism and melting of meteorite parent bodies (planetesimals) remains elusive.  相似文献   

10.
Acapulcoites (most ancient Hf-W ages are 4,563.1?±?0.8 Ma), lodranites (most ancient Hf-W ages are 4,562.6?±?0.9 Ma) and rocks transitional between them are ancient residues of different degrees of partial melting of a chondritic source lithology (e.g., as indicated by the occurrence of relict chondrules in 9 acapulcoites), although the precise chondrite type is unknown. Acapulcoites are relatively fine- grained (~150–230?μm) rocks with equigranular, achondritic textures and consist of olivine, orthopyroxene, Ca-rich clinopyroxene, plagioclase, metallic Fe,Ni, troilite, chromite and phosphates. Lodranites are coarser grained (540–700?μm), with similar equigranular, recrystallized textures, mineral compositions and contents, although some are significantly depleted in eutectic Fe,Ni-FeS and plagioclase- clinopyroxene partial melts. The acapulcoite-lodranite clan is most readily distinguished from other groups of primitive achondrites (e.g., winoanites/IAB irons) by oxygen isotopic compositions, although more than 50% of meteorites classified as acapulcoites currently lack supporting oxygen isotopic data. The heat source for melting of acapulcoites-lodranites was internal to the parent body, most likely 26Al, although some authors suggest it was shock melting. Acapulcoites experienced lower temperatures of ~980–1170?°C and lower degrees of partial melting (~1–4?vol.%) and lodranites higher temperatures of ~1150–1200?°C and higher degrees (~5?≥?10?vol.%) of partial melting. Hand-specimen and thin section observations indicate movement of Fe,Ni-FeS, basaltic, and phosphate melts in veins over micrometer to centimeter distances. Mineralogical, chemical and isotopic properties, Cosmic Ray Exposure (CRE) ages which cluster around 4–6 Ma and the occurrence of some meteorites consisting of both acapulcoite and lodranite material, indicate that these meteorites come from one parent body and were most likely ejected in one impact event. Whereas the precise parent asteroid of these meteorites is unknown, there is general agreement that it was an S-type object. There is nearly total agreement that the acapulcoite-lodranite parent body was <~100?km in radius and, based on the precise Pb–Pb age for Acapulco of 4555.9?±?0.6 Ma, combined with the Hf/W and U/Pb records and cooling rates deduced from mineralogical and other investigations, that the parent body was fragmented during its cooling which the U/Pb system dates at precisely 4556?±?1 Ma. Hf-W chronometry suggests that the parent body of the acapulcoites-lodranites and, in fact, the parent bodies of all “primitive achondrites” accreted slightly later than those of the differentiated achondrites and, thus, had lower contents of 26Al, the heat producing radionuclide largely responsible for heating of both primitive and differentiated achondrites. Thus, the acapulcoite-lodranite parent body never experienced the high degrees of melting responsible for the formation of the differentiated meteorites, but arrested its melting history at relatively low degrees of ~15?vol.%.  相似文献   

11.
GRA 95209 may provide our best opportunity to date to understand the earliest stages of core formation in asteroidal bodies. This lodranite preserves a physically, chemically, and mineralogically complex set of metal-sulfide veins. High-resolution X-ray computed tomography revealed three distinct lithologies. The dominant mixed metal-silicate-sulfide matrix is cut by metal-rich, graphite-bearing veins exceeding 1 cm in width and grades into a volumetrically minor metal-poor region. Silicate compositions and modal abundances are typical for lodranites, while the mineralogy of the metal-sulfide component is complex and differs among the three lithologies. Kamacite and troilite occur with chromite, tetrataenite, schreibersite, graphite, and a range of phosphates. An 39Ar-40Ar age of 4.521 ± 0.006 Ga measures the time of closure of the K-Ar system. Carbon rosettes within the metal-rich vein are nitrogen-poor, well crystallized, include kamacite sub-grains of composition comparable to the host metal, and are essentially isotopically homogeneous (δ13C ∼ −33‰). In contrast, carbon rosettes within metal of the metal-poor lithology are N-poor, poorly crystallized, include kamacite grains that are Ni-poor compared to their host metal, and are isotopically heterogeneous (δ13C ranging from −50 to +80‰) even within a single metal grain. The silicate portion of GRA 95209 is similar to the lodranite EET 84302, sharing a common texture, silicate mineral compositions, and Ar-Ar age. GRA 95209 and EET 84302 are intermediate between acapulcoites and lodranites. Both experienced Fe,Ni-FeS melting with extensive melt migration, but record only the onset of silicate partial melting with limited migration of silicate melt. The complex metal-sulfide veins in GRA 95209 resulted from low-degree partial melting and melt migration and intruded the matrix lithology. Reactions between solid minerals and melt, including oxidation-reduction reactions, produced the array of phosphates, schreibersite, and tetrataenite. Extensive reduction in the metal-rich vein resulted from its origin in a hotter portion of the asteroid. This difference in thermal history is supported by the graphite structures and isotopic compositions. The graphite rosettes in the metal-rich vein are consistent with high-temperature igneous processing. In contrast, the carbon in the metal-poor lithology appears to preserve a record of formation in the nebula prior to parent-body formation. Carbon incorporated from the solar nebula into a differentiating asteroid is preferentially incorporated in metal-sulfide melts that form a core, but does not achieve isotopic homogeneity until extensive thermal processing occurs.  相似文献   

12.
The lunar meteorites Northwest Africa (NWA) 3163, 4881, and 4483 are paired stones classified as granulitic breccias. At 2.4 kg, these three stones constitute one of the largest known lunar meteorite masses. Here we describe the petrography, mineralogy, and chemistry of NWA 3163, 4881, and 4483, and present 40Ar-39Ar data for two of the meteorites. Two-pyroxene thermometry indicates that the rocks equilibrated at 1050 ± 50 °C, which represents the high-temperature, low-pressure event that generated their characteristic recrystallization textures and reset their Ar systematics. Stepped-heating, in situ infrared laser microprobe 40Ar-39Ar geochronology yields a mean age of 3327 ± 29 Ma for NWA 3163, and a more disturbed release spectrum for NWA 4881. NWA 4881 shows an upward-trending pattern, suggesting that it may have had a 40Ar-39Ar age of >3.0 Ga, but that it was partially reset at ∼2.6 Ga. NWA 3163 et al. exhibit shock effects, including maskelynitized plagioclase, shock veins, and melt pockets, which are absent in the Apollo granulitic breccias. Although the Apollo and meteorite samples are texturally similar and have comparable bulk compositions and equilibration temperatures, their trace and siderophile element contents point to distinct parental lithologies derived from different regions of the Moon. Based on mineralogical and geochemical differences between the Apollo and meteorite samples, we conclude that the parent rock(s) of the paired NWA meteorites came from an area outside the Imbrium region and that they underwent high-temperature (granulite event) metamorphism long after the Late Heavy Bombardment.  相似文献   

13.
Representing a suite of well-preserved basaltic meteorites with reported ages from 4566.18 ± 0.14 Ma to 4557.65 ± 0.13 Ma, angrites have been recurring targets for cross-calibrating extinct and absolute chronometers. However, inconsistencies exist in the available chronological data set, including a 4566.18 ± 0.14 Ma Pb-Pb age reported by Baker et al. [Baker J., Bizzarro M., Wittig N., Connelly J. and Haack H. (2005) Early planetesimal melting from an age of 4.5662 Gyr for differentiated meteorites. Nature436, 1127-1131] for Sahara 99555 (herein SAH99555) that is significantly older than a Pb-Pb age for D’Orbigny, despite the two meteorites yielding indistinguishable Hf-W and Mn-Cr ages. We re-evaluate the Pb-Pb age of SAH99555 using a stepwise dissolution procedure on a whole rock fragment and a pyroxene separate. The combined data set yields a linear array that reflects a mixture of radiogenic Pb and terrestrial contamination and corresponds to an age of 4564.58 ± 0.14 Ma, which is 1.60 ± 0.20 Ma younger than that reported by Baker et al. [Baker J., Bizzarro M., Wittig N., Connelly J. and Haack H. (2005) Early planetesimal melting from an age of 4.5662 Gyr for differentiated meteorites. Nature436, 1127-1131]. Our conclusion that SAH99555 crystallized at 4564.58 ± 0.14 Ma requires that all initial Pb was removed in the first progressive dissolution steps, an assertion supported by linearity of data generated by stepwise dissolution of a single fragment and the removal of an obvious highly-radiogenic component early in the dissolution process. We infer that the linear array defined by Baker et al. [Baker J., Bizzarro M., Wittig N., Connelly J. and Haack H. (2005) Early planetesimal melting from an age of 4.5662 Gyr for differentiated meteorites. Nature436, 1127-1131] and their older age reflects a ternary mixture of Pb with constant relative proportions of highly-radiogenic initial Pb and radiogenic Pb with varying amounts of a terrestrial contamination. This requires that the phase harboring the initial Pb is insoluble in 2 M HCl, the only acid applied to the samples by Baker et al. [Baker J., Bizzarro M., Wittig N., Connelly J. and Haack H. (2005) Early planetesimal melting from an age of 4.5662 Gyr for differentiated meteorites. Nature436, 1127-1131] prior to dissolution.  相似文献   

14.
Thermal history recorded by the Apollo 17 impact melt breccia 73217   总被引:1,自引:0,他引:1  
Lunar breccia 73217 is composed of plagioclase and pyroxene clasts originating from a single gabbronorite intrusion, mixed with a silica-rich glass interpreted to represent an impact melt. A study of accessory minerals in a thin section from this breccia (73217,52) identified three different types of zircon and anhedral grains of apatite which represent distinct generations of accessory phases and provide a unique opportunity to investigate the thermal history of the sample. Equant, anhedral zircon grains that probably formed in the gabbronorite, referred to as type-1, have consistent U-Pb ages of 4332 ± 7 Ma. A similar age of 4335 ± 5 Ma was obtained from acicular zircon (type-2) grains interpreted to have formed from impact melt. A polycrystalline zircon aggregate (type-3) occurs as a rim around a baddeleyite grain and has a much younger age of 3929 ± 10 Ma, similar to the 3936 ± 17 Ma age of apatite grains found in the thin section. A combined apatite-type-3 zircon age of 3934 ± 12 Ma is proposed as the age of the Serenitatis impact event and associated thermal pulse. X-ray mapping and electron probe analyses showed that Ti is inhomogeneous in the zircon grains on the sub-micrometer scale. However, model temperatures estimated from SHRIMP analyses of Ti-concentration in the 10 μm diameter spots on the polished surfaces of type-1 and type-2 zircons range between about 1300 and 900 °C respectively, whereas Ti-concentrations determined for the type-3 zircon are higher at about 1400-1500 °C. A combination of U-Pb ages, Ti-concentration data and detailed imaging and petrographic studies of the zircon grains shows that the gabbronorite parent of the zircon clasts formed shortly before the 4335 ± 5 Ma impact, which mixed the clasts and the felsic melt and projected the sample closer to the surface where fast cooling resulted in the crystallization of acicular zircon (type-2). The 3934 ± 12 Ma Serenitatis event resulted in partial remelting of the glass and formation of polycrystalline zircon (type-3). This event also reset the U-Pb system of apatite, formed merrillite coronas around some apatite grains, and probably re-equilibrated some pyroxenes in the clasts. Although there have been arguments for pre-3.9 Ga impacts based on other types of samples, the age of the acicular zircon at 4335 ± 5 Ma provides the first evidence of impact melt significantly predating the lunar cataclysm. Our data, combined with other chronological results, demonstrate the occurrence of pre-3.9 Ga impacts on the Moon and suggest that the lunar impact history consisted of a series of intense bombardment episodes interspersed with relatively calm periods of low impact flux.  相似文献   

15.
Metal segregation and silicate melting on asteroids are the most incisive differentiation events in the early evolution of planetary bodies. The timing of these events can be constrained using the short-lived 182Hf-182W radionuclide system. Here we present new 182Hf-182W data for major types of primitive achondrites including acapulcoites, winonaites and one lodranite. These meteorites are of particular interest because they show only limited evidence for partial melting of silicates and are therefore intermediate between chondrites and achondrites.For acapulcoites we derived a 182Hf-182W age of ΔtCAI = 4.1 +1.2/−1.1 Ma. A model age for winonaite separates calculated from the intercept of the isochron defines an age of ΔtCAI = 4.8 +3.1/−2.6 Ma (assuming a bulk Hf/W ratio of ∼1.2). Both ages most likely define primary magmatic events on the respective parent bodies, such as melting of metal, although metal stayed in place and did not segregate to form a core. A later thermal event is responsible for resetting of the winonaite isochron, yielding an age of ΔtCAI = 14.3 +2.7/−2.2 Ma, significantly younger than the model age. Assuming a co-genetic relationship between winonaites and silicates present in IAB iron meteorites (based on oxygen isotope composition) and including data by Schulz et al. (2009), a common parent body chronology can be established. Magmatic activity occurred between ∼1.5 and 5 Ma after CAIs. More than 5 Ma later, intensive thermal metamorphism has redistributed Hf-W. Average cooling rates calculated for the winonaite/IAB parent asteroid range between ∼35 and ∼4 K/Ma, most likely reflecting different burial depths. Cooling rates obtained for acapulcoites were ∼40 K/Ma to ∼720 K and then ∼3 K/Ma to ∼550 K.Accretion and subsequent magmatism on the acapulcoite parent body occurred slightly later if compared to most achondrite parent bodies (e.g., angrites, ureilites and eucrites), in this case supporting the concept of an inverse correlation between accretion-age of asteroids and intensity of heating in their interiors as expected from heating by 26Al and 60Fe decay. However, the early accretion of the parent asteroid of primitive IAB silicates (∼1.0 Ma after CAIs; Schulz et al., 2009) and the possibly impact-induced melting-history of winonaites show that this concept is too simplistic. Parent body size, impact-driven melting as well as heat-insulating regolith cover also need to be considered in the early history of asteroid differentiation.  相似文献   

16.
Spatially resolved argon isotope measurements have been performed on neutron-irradiated samples of two Martian basalts (Los Angeles and Zagami) and two Martian olivine-phyric basalts (Dar al Gani (DaG) 476 and North West Africa (NWA) 1068). With a ∼50 μm diameter focused infrared laser beam, it has been possible to distinguish between argon isotopic signatures from host rock (matrix) minerals and localized shock melt products (pockets and veins). The concentrations of argon in analyzed phases from all four meteorites have been quantified using the measured J values, 40Ar/39Ar ratios and K2O wt% in each phase. Melt pockets contain, on average, 10 times more gas (7-24 ppb 40Ar) than shock veins and matrix minerals (0.3-3 ppb 40Ar). The 40Ar/36Ar ratio of the Martian atmosphere, estimated from melt pocket argon extractions corrected for cosmogenic 36Ar, is: Los Angeles (∼1852), Zagami (∼1744) and NWA 1068 (∼1403). In addition, Los Angeles shows evidence for variable mixing of two distinct trapped noble gas reservoirs: (1) Martian atmosphere in melt pockets, and (2) a trapped component, possibly Martian interior (40Ar/36Ar: 480-490) in matrix minerals. Average apparent 40Ar/39Ar ages determined for matrix minerals in the four analyzed meteorites are 1290 Ma (Los Angeles), 692 Ma (Zagami), 515 Ma (NWA 1068) and 1427 Ma (DaG 476). These 40Ar/39Ar apparent ages are substantially older than the ∼170-474 Ma radiometric ages given by other isotope dating techniques and reveal the presence of trapped 40Ar. Cosmic ray exposure (CRE) ages were measured using spallogenic 36Ar and 38Ar production. Los Angeles (3.1 ± 0.2 Ma), Zagami (2.9 ± 0.4 Ma) and NWA 1068 (2.0 ± 0.5 Ma) yielded ages within the range of previous determinations. DaG 476, however, yielded a young CRE age (0.7 ± 0.25 Ma), attributed to terrestrial alteration. The high spatial variation of argon indicates that the incorporation of Martian atmospheric argon into near-surface rocks is controlled by localized glass-bearing melts produced by shock processes. In particular, the larger (mm-size) melt pockets contain near end-member Martian atmospheric argon. Based on petrography, composition and argon isotopic data we conclude that the investigated melt pockets formed by localized in situ shock melting associated with ejection. Three processes may have led to atmosphere incorporation: (1) argon implantation due to atmospheric shock front collision with the Martian surface, (2) transformation of an atmosphere-filled cavity into a localized melt zone, and (3) shock implantation of atmosphere trapped in cracks, pores and fissures.  相似文献   

17.
It has long been customary to assume that in the bulk composition of the Earth, all refractory-lithophile elements (including major oxides Al2O3 and CaO, all of the REE, and the heat-producing elements Th and U) occur in chondritic, bulk solar system, proportion to one another. Recently, however, Nd-isotopic studies (most notably Boyet M. and Carlson R. W. (2006) A new geochemical model for the Earth’s mantle inferred from 146Sm-142Nd systematics. Earth Planet. Sci. Lett.250, 254-268) have suggested that at least the outer portion of the planet features a Nd/Sm ratio depleted to ∼0.93 times the chondritic ratio. The primary reaction to this type of evidence has been to invoke a “hidden” reservoir of enriched matter, sequestered into the deepest mantle as a consequence of primordial differentiation. I propose a hypothesis that potentially explains the evidence for Nd/Sm depletion in a very different way. Among the handful of major types of differentiated asteroidal meteorites, two (ureilites and aubrites) are ultramafic restites so consistently devoid of plagioclase that meteoriticists were once mystified as to how all the complementary plagioclase-rich matter (basalt) was lost. The explanation appears to be basalt loss by graphite-fueled explosive volcanism on roughly 100-km sized planetesimals; with the dispersiveness of the process dramatically enhanced, relative to terrestrial experience, because the pyroclastic gases expand into vacuous space (Wilson L. and Keil K. (1991) Consequences of explosive eruptions on small Solar System bodies: the case of the missing basalts on the aubrite parent body. Earth Planet. Sci. Lett.104, 505-512). By analogy with lunar pyroclastic products, the typical size of pyroclastic melt/glass droplets under these circumstances will be roughly 0.1 mm. Once separated from an asteroidal or planetesimal gravitational field, droplets of this size will generally spiral toward the Sun, rather than reaccrete, because drag forces such the Poynting-Robertson effect quickly modify their orbits (the semimajor axis, in a typical scenario, is reduced by several hundred km during the first trip around the Sun). Assuming a similar process occurred on many of the Earth’s precursor planetesimals while they were still roughly 100 km in diameter, the net effect would be a depleted composition for the final Earth. I have modeled the process of trace-element depletion in the planetesimal mantles, assuming the partial melting was nonmodal and either batch or dynamic in terms of the melt-removal style. Assuming the process is moderately efficient, typical final-Earth Nd/Sm ratios are 0.93-0.96 times chondritic. Depletion is enhanced by a relatively low assumed residual porosity in batch-melting scenarios, but dampened by a relatively high value for “continuous” residue porosity in dynamic melting scenarios. Pigeonite in the source matter has a dampening effect on depletion. There are important side effects to the Nd/Sm depletion. The heat-producing elements, Th, U and K, might be severely depleted. The Eu/Eu ratio of the planet is unlikely to remain precisely chondritic. One of the most inevitable side effects, depletion of the Al/Ca ratio, is consistent with an otherwise puzzling aspect of the composition of the upper mantle. A perfectly undepleted composition for the bulk Earth is dubious.  相似文献   

18.
Shock veins and melt pockets in Lithology A of Martian meteorite Elephant Moraine (EETA) 79001 have been investigated using electron microprobe (EM) analysis, petrography and X-ray Absorption Near Edge Structure (XANES) spectroscopy to determine elemental abundances and sulfur speciation (S2− versus S6+). The results constrain the materials that melted to form the shock glasses and identify the source of their high sulfur abundances. The XANES spectra for EETA79001 glasses show a sharp peak at 2.471 keV characteristic of crystalline sulfides and a broad peak centered at 2.477 keV similar to that obtained for sulfide-saturated glass standards analyzed in this study. Sulfate peaks at 2.482 keV were not observed. Bulk compositions of EETA79001 shock melts were estimated by averaging defocused EM analyses. Vein and melt pocket glasses are enriched in Al, Ca, Na and S, and depleted in Fe, Mg and Cr compared to the whole rock. Petrographic observations show preferential melting and mobilization of plagioclase and pyrrhotite associated with melt pocket and vein margins, contributing to the enrichments. Estimates of shock melt bulk compositions obtained from glass analyses are biased towards Fe- and Mg- depletions because, in general, basaltic melts produced from groundmass minerals (plagioclase and clinopyroxene) will quench to a glass, whereas ultramafic melts produced from olivine and low-Ca pyroxene megacrysts crystallize during the quench. We also note that the bulk composition of the shock melt pocket cannot be determined from the average composition of the glass but must also include the crystals that grew from the melt - pyroxene (En72-75Fs20-21Wo5-7) and olivine (Fo75-80). Reconstruction of glass + crystal analyses gives a bulk composition for the melt pocket that approaches that of lithology A of the meteorite, reflecting bulk melting of everything except xenolith chromite.Our results show that EETA79001 shock veins and melt pockets represent local mineral melts formed by shock impedance contrasts, which can account for the observed compositional anomalies compared to the whole rock sample. The observation that melts produced during shock commonly deviate from the bulk composition of the host rock has been well documented from chondrites, rocks from terrestrial impact structures and other Martian meteorites. The bulk composition of shock melts reflects the proportions of minerals melted; large melt pockets encompass more minerals and approach the whole rock whereas small melt pockets and thin veins reflect local mineralogy. In the latter, the modal abundance of sulfide globules may reach up to 15 vol%. We conclude the shock melt pockets in EETA79001 lithology A contain no significant proportion of Martian regolith.  相似文献   

19.
We have used a recently developed quantitative pyrolysis-Fourier transform infrared spectroscopy method to measure the production of water and carbon dioxide during 250 °C desorption and 1000 °C gasification steps for a range of carbonaceous chondrites. Greater yields of water and carbon dioxide during gasification are associated with meteorites believed to have experienced more aqueous alteration on their asteroid parent body (i.e. gas yields for petrographic type 1 > type 2 > type 3). Volatile yields most likely reflect quantities of hydrated mineral phases and partially oxidised organic matter. Methane was not detected in the gasification products of the meteorites, allowing an upper limit on its production of around 100 ppm to be calculated based on the sensitivity of the pyrolysis-Fourier transform infrared spectroscopy technique employed. When considered alongside rates of infall of cosmic dust throughout Earth history, the data can be used to evaluate the production of volatiles during the thermal ablation of dust upon atmospheric entry, and to estimate their contribution to a terrestrial planet’s atmosphere and hydrosphere. Over the long term, it appears that contributions of this nature to the Earth’s volatile inventory are small, although production rates are calculated to have been substantially higher before and during the Late Heavy Bombardment of 3.8-4.0 Ga. Moreover, ablation of carbonaceous chondritic material does not appear to be a plausible source of the atmospheric methane budget of Mars.  相似文献   

20.
Secondary ion mass spectrometer (SIMS) oxygen isotope analyses were performed on 24 clasts, representing 9 clast types, in the Dar al Gani (DaG) 319 polymict ureilite with precisions better than 1‰. Olivine-rich clasts with typical ureilitic textures and mineral compositions have oxygen isotopic compositions that are identical to those of the monomict ureilites and plot along the CCAM (Carbonaceous Chondrite Anhydrous Mineral) line. Other igneous clasts, including plagioclase-bearing clasts, also plot along the CCAM line, indicating that they were derived from the ureilite parent body (UPB). Thus, we suggest that some of the plagioclase-bearing clasts in the polymict ureilites represent the “missing basaltic component” produced by partial melting on the UPB.Trace element concentrations (Mg, K, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Rb, Sr and Ba) in ureilitic plagioclase and glass from 13 clasts were obtained by using the SIMS high mass resolution method. The trace element contents of the plagioclase generally show monotonic variations with anorthite content (mol%) that are consistent with partial melting and fractional crystallization. Incompatible trace element concentrations (K, Ti, and Ba) are low and variable for plagioclase with An > 40, indicating that the parental magmas for some clasts were derived from a depleted source. We performed partial melt modeling for CI and CM precursor compositions and compared the results to the observed trace element (K, Ba, and Sr) abundances in the plagioclase. Our results indicate that (1) the UPB evolved from a alkali-rich carbonaceous chondritic precursor, (2) parent melts of porphyritic clasts could have formed by 5-20% equilibrium partial melting and subsequent fractional crystallization, and (3) parent melts of the incompatible trace element-depleted clasts could be derived from fractional melting, where low degree (<10%) partial melts were repeatedly extracted from their solid sources.Thus, both the oxygen isotopic and trace element compositions of the plagioclase bearing clasts in DaG-319 suggest that the UPB underwent localized low degree-partial melting events. The partial melts could have been repeatedly extracted from the precursor, resulting in the formation of the olivine-pigeonite monomict ureilites as the final residue.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号