首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
Silicon stable isotopes can be used to trace the biogeochemical pathways of Si as it moves from its continental sources to its sink in ocean sediments. Along the way, Si is incorporated into clay minerals, taken up by plants where it forms plant opal, and leached into rivers, the major land-to-ocean conduit. Compared to igneous rocks, the waters that drain continents are enriched in heavy Si isotopes, but the mechanisms that control fractionation have not been elucidated. We studied Si isotope fractionation along a 4 million yr basaltic soil chronosequence on the Hawaiian Islands. Using the natural context of these samples in combination with laboratory experiments, we demonstrate that the isotopic composition of dissolved Si in weathering systems is determined by the combined effects of rock disintegration, clay mineral neosynthesis, and Si biocycling. Weathering preferentially releases 28Si into solution, whereas secondary mineral formation preferentially removes 28Si from solution. In humid environments, leached soils have lost large amounts of this soluble Si, thus creating a net loss of 30Si from the entire soil system. As soils develop and greater fractions of Si reside in neoformed clay minerals, δ30Sibulk soil values change progressively toward more negative values; basalt δ30Si values are about −0.5‰, but older soils have δ30Si values up to −2.5‰. The difference between the solid and solution δ30Si values remains more or less constant with progressive weathering, and therefore, soil water from older soils has a more negative δ30Si composition. In the upper horizons of the Hawaiian soils, this weathering-driven δ30Si shift is modified by the addition of unweathered primary minerals via dust, carrying δ30Si values of about −0.5‰, and by biocycling of Si via plants, producing negative δ30Si values in phytoliths and positive δ30Si values in soil solutions derived from upper horizons. Due to the high concentrations of dissolved Si in these near-surface layers, rivers have more positive δ30Si values than predicted based on the weathering status of the lower horizons. When combined with published δ30Si values from large rivers worldwide, we find that the results from Hawaii point to weathering control of Si isotopes delivered to the oceans, and thus, to an important continent-ocean linkage that warrants further investigation.  相似文献   

2.
In soils, silicon released by mineral weathering can be retrieved from soil solution through clay formation, Si adsorption onto secondary oxides and plant uptake, thereby impacting the Si-isotopic signature and Ge/Si ratio of dissolved Si (DSi) exported to rivers. Here we use these proxies to study the contribution of biogenic Si (BSi) in a soil-plant system involving basaltic ash soils differing in weathering degree under intensive banana cropping. δ30Si and Ge/Si ratios were determined in bulk soils (<2 mm), sand (50-2000 μm), silt (2-50 μm), amorphous Si (ASi, 2-50 μm) and clay (<2 μm) fractions: δ30Si by MC-ICP-MS Nu Plasma in medium resolution, operating in dry plasma with Mg doping (δ30Si vs. NBS28 ± 0.12‰ ± 2σSD), Ge/Si computed after determination of Ge and Si concentrations by HR-ICP-MS and ICP-AES, respectively. Components of the ASi fraction were quantified by microscopic counting (phytoliths, diatoms, ashes). Compared to fresh ash (δ30Si = −0.38‰; Ge/Si = 2.21 μmol mol−1), soil clay fractions (<2 μm) were enriched in light Si isotopes and Ge: with increasing weathering degree, δ30Si decreased from −1.19 to −2.37‰ and Ge/Si increased from 4.10 to 5.25 μmol mol−1. Sand and silt fractions displayed δ30Si values close to fresh ash (−0.33‰) or higher due to saharian dust quartz deposition, whose contribution was evaluated by isotopic mass balance calculation. Si-isotopic signatures of bulk soils (<2 mm) were strongly governed by the relative proportions of primary and secondary minerals: the bulk soil Si-isotopic budget could be closed indicating that all the phases involved were identified. Microscopic counting highlighted a surface accumulation of banana phytoliths and a stable phytolith pool from previous forested vegetation. δ30Si and Ge/Si values of clay fractions in poorly developed volcanic soils, isotopically heavier and Ge-depleted in surface horizons, support the occurrence of a DSi source from banana phytolith dissolution, available for Si sequestration in clay-sized secondary minerals (clay minerals formation and Si adsorption onto Fe-oxide). In the soil-plant system, δ30Si and Ge/Si are thus highly relevant to trace weathering and input of DSi from phytoliths in secondary minerals, although not quantifying the net input of BSi to DSi.  相似文献   

3.
The sequestration of silicon in soil clay-sized iron oxides may affect the terrestrial cycle of Si. Iron oxides indeed specifically adsorb aqueous monosilicic acid (H4SiO40), thereby influencing Si concentration in soil solution. Here we study the impact of H4SiO40 adsorption on the fractionation of Si isotopes in basaltic ash soils differing in weathering degree (from two weathering sequences, Cameroon), hence in clay and Fe-oxide contents, and evaluate the potential isotopic impact on dissolved Si in surrounding Cameroon rivers. Adsorption was measured in batch experiment series designed as function of time (0-72 h) and initial concentration (ic) of Si in solution (0.61-1.18 mM) at 20 °C, constant pH (5.5) and ionic strength (1 mM). After various soil-solution contact times, the δ30Si vs. NBS28 compositions were determined in selected solutions by MC-ICP-MS (Nu Plasma) in medium resolution, operating in dry plasma with Mg doping with an average precision of ±0.15‰ (±2σSEM). The quantitative adsorption of H4SiO40 by soil Fe-oxides left a solution depleted in light Si isotopes, which confirms previous study on synthetic Fe-oxides. Measured against its initial composition (δ30Si = +0.02 ± 0.07‰ (±2σSD)), the solutions were systematically enriched in 30Si reaching maximum δ30Si values ranging between +0.16‰ and +0.95‰ after 72 h contact time. The enrichment of the solution in heavy isotopes increased with increasing values of three parameters: soil weathering degree, iron oxide content, and proportion of short-range ordered Fe-oxide. The Si-isotopic signature of the solution was partly influenced by Si release, possibly through mineral dissolution and Si desorption from oxide surfaces, depending on soil type, highlighting the complex pattern of natural soils. Surrounding Cameroon rivers displayed a mean Si-isotopic signature of +1.19‰. Our data imply that in natural environments, H4SiO40 adsorption by soil clay-sized Fe-oxides at least partly impacts the Si-isotopic signature of the soil solution exported to water streams.  相似文献   

4.
Copper and Zn metals are produced in large quantities for different applications. During Cu production, large amounts of Cu and Zn can be released to the environment. Therefore, the surroundings of Cu smelters are frequently metal-polluted. We determined Cu and Zn concentrations and Cu and Zn stable isotope ratios (δ65Cu, δ66Zn) in three soils at distances of 1.1, 3.8, and 5.3 km from a Slovak Cu smelter and in smelter wastes (slag, sludge, ash) to trace sources and transport of Cu and Zn in soils. Stable isotope ratios were measured by multicollector inductively coupled plasma mass spectrometry (MC-ICP-MS) in total digests. Soils were heavily contaminated with concentrations up to 8087 μg g−1 Cu and 2084 μg g−1 Zn in the organic horizons. The δ65Cu values varied little (−0.12‰ to 0.36‰) in soils and most wastes and therefore no source identification was possible. In soils, Cu became isotopically lighter with increasing depth down to 0.4 m, likely because of equilibrium reactions between dissolved and adsorbed Cu species during transport of smelter-derived Cu through the soil. The δ66ZnIRMM values were isotopically lighter in ash (−0.41‰) and organic horizons (−0.85‰ to −0.47‰) than in bedrock (−0.28‰) and slag (0.18‰) likely mainly because of kinetic fractionation during evaporation and thus allowed for separation of smelter-Zn from native Zn in soil. In particular in the organic horizons large variations in δ66Zn values occur, probably caused by biogeochemical fractionation in the soil-plant system. In the mineral horizons, Zn isotopes showed only minor shifts to heavier δ66Zn values with depth mainly because of the mixing of smelter-derived Zn and native Zn in the soils. In contrast to Cu, Zn isotope fractionation between dissolved and adsorbed species was probably only a minor driver in producing the observed variations in δ66Zn values. Our results demonstrate that metal stable isotope ratios may serve as tracer of sources, vertical dislocation, and biogeochemical behavior in contaminated soil.  相似文献   

5.
Copper stable isotope ratios are fractionated during various biogeochemical processes and may trace the fate of Cu during long-term pedogenetic processes. We assessed the effects of oxic weathering (formation of Cambisols) and podzolization on Cu isotope ratios (δ65Cu). Two Cambisols (oxic weathered soils without strong vertical translocations of soil constituents) and two Podzols (soils showing vertical translocation of organic matter, Fe and Al) were analyzed for Cu concentrations, partitioning of Cu in seven fractions of a sequential extraction and δ65Cu values in bulk soil. Cu concentrations in the studied soils were low (1.4-27.6 μg g−1) and Cu was mainly associated with strongly bound Fe oxide- and silicate-associated forms. Bulk δ65Cu values varied between −0.57‰ and 0.44‰ in all studied horizons. The O horizons had on average significantly lighter Cu isotope compositions (−0.21‰) than the A horizons (0.13‰) which can either be explained by Cu isotope fractionation during cycling through the plants or deposition of isotopically light Cu from the atmosphere. Oxic weathering without pronounced podzolization in both Cambisols and a weakly developed Podzol (Haplic Podzol 2) caused no significant isotope fractionation in the single profiles, while a slight tendency to lower δ65Cu values with depth was visible in all four profiles. This is the opposite depth distribution of δ65Cu values to that we observed in hydromorphic soils (soils which show indication of redox changes because of the influence of water saturation) in a previous study. In a more pronounced Podzol (Haplic Podzol 1), δ65Cu values and Cu concentrations decreased from Ah to E horizons and increased again deeper in the soil. Humus-rich sections of the Bhs horizon had higher Cu concentrations (2.8 μg g−1) and a higher δ65Cu value (−0.18‰) than oxide-rich sections (1.9 μg g−1, −0.35‰) suggesting Cu translocation between E and B horizons as organo-Cu complexes. The different depth distributions in oxic weathered and hydromorphic soils and the pronounced vertical differences in δ65Cu values in Haplic Podzol 1 indicate a promising potential of δ65Cu values to improve our knowledge of the fate of Cu during long-term pedogenetic processes.  相似文献   

6.
The terrestrial biogenic Si (BSi) pool in the soil-plant system is ubiquitous and substantial, likely impacting the land-ocean transfer of dissolved Si (DSi). Here, we consider the mechanisms controlling DSi in forest soil in a temperate granitic ecosystem that would differ from previous works mostly focused on tropical environments. This study aims at tracing the source of DSi in forest floor leachates and in soil solutions under various tree species at homogeneous soil and climate conditions, using stable Si isotopes and Ge/Si ratios. Relative to granitic bedrock, clays minerals were enriched in 28Si and had high Ge/Si ratios, while BSi from phytoliths was also enriched in 28Si, but had a low Ge/Si ratio. Such a contrast is useful to infer the relative contribution of silicate weathering and BSi dissolution in the shallow soil on the release of DSi in forest floor leachate solutions. The δ30Si values in forest floor leachates (−1.38‰ to −2.05‰) are the lightest ever found in natural waters, and Ge/Si ratios are higher in forest floor leachates relative to soil solution. These results suggest dissolution of 28Si and Ge-enriched secondary clay minerals incorporated by bioturbation in organic-rich horizons in combination with an isotopic fractionation releasing preferentially light Si isotopes during this dissolution process. Ge/Si ratios in soil solutions are governed by incongruent weathering of primary minerals and neoformation of secondary clays minerals. Tree species influence Si-isotopic compositions and Ge/Si ratios in forest floor leachates through differing incorporation of minerals in organic horizons by bioturbation and, to a lesser extent, through differing Si recycling.  相似文献   

7.
Stable iron isotope ratios in three soils (two Podzols and one Cambisol) were measured by MC-ICPMS to investigate iron isotope fractionation during pedogenic iron transformation and translocation processes under oxic conditions. Podzolization is a soil forming process in which iron oxides are dissolved and iron is translocated and enriched in the subsoil under the influence of organic ligands. The Cambisol was studied for comparison, representing a soil formed by chemical weathering without significant translocation of iron. A three-step sequential extraction procedure was used to separate operationally-defined iron mineral pools (i.e., poorly-crystalline iron oxides, crystalline iron oxides, silicate-bound iron) from the soil samples. Iron isotope ratios of total soil digests were compared with those of the separated iron mineral pools. Mass balance calculations demonstrated excellent agreement between results of sequential extractions and total soil digestions. Systematic variations in the iron isotope signature were found in the Podzol profiles. An enrichment of light iron isotopes of about 0.6‰ in δ57Fe was found in total soil digests of the illuvial Bh horizons which can be explained by preferential translocation of light iron isotopes. The separated iron mineral pools revealed a wide range of δ57Fe values spanning more than 3‰ in the Podzol profiles. Strong enrichments of heavy iron isotopes in silicate-bound iron constituting the residue of weathering processes, indicated the preferential transformation of light iron isotopes during weathering. Iron isotope fractionation during podzolization is probably linked to the ligand-controlled iron translocation processes. Comparison of iron isotope data from eluvial and illuvial horizons of the Podzol profiles revealed that some iron must have been leached out of the profile. However, uncertainties in the initial iron content and iron isotopic composition of the parent materials prevented thorough mass balance calculations of iron fluxes within the profiles. In contrast to the Podzol profiles, the Cambisol profile displayed uniform δ57Fe values across soil depth and showed only a small enrichment of light iron isotopes of about 0.4‰ in the poorly-crystalline iron oxide pool extracted by 0.5 M HCl. This work demonstrates that significant iron isotope fractionations can occur during pedogenesis in oxic environments under the influence of organic ligands. Our findings provide new insights into fractionation mechanisms of iron isotopes and will help in the development of stable iron isotopes as tracers for biogeochemical iron cycling in nature.  相似文献   

8.
We dissolved Boulder Creek Granodiorite in a plug flow reactor for 5794 h at pH = 1 and T = 25 °C. The primary purpose of the experiment was to identify controls on dissolved δ44/40Ca, δ44/42Ca, and δ26/24Mg values during granite weathering. Herein, we also examine the origin of Ca and Mg isotopic variability among minerals composing the Boulder Creek Granodiorite, and we constrain fundamental characteristics of granite weathering important for quantifying the elemental and isotopic geochemistry of the reactor output. Nine Ca-bearing minerals display an 8.80‰ range of δ44/40Ca values and a 0.51‰ range of δ44/42Ca values. Three Mg-bearing minerals display a 1.53‰ range of δ26/24Mg values. These ranges expressed at the mineralogical scale are higher than the ranges thus far reported for bulk igneous rocks. Most of the δ44/40Ca variability reflects 40Ca enrichment in K-feldspar, and to a lesser extent, biotite, due to the radioactive decay of 40K over the 1.7 Ga age of the rock, whereas the entire range of δ44/42Ca values reflects mass-dependent isotope fractionation during igneous differentiation and crystallization. The range of δ26/24Mg values may represent either fractionation during the chloritization of biotite or interaction of the Boulder Creek Granodiorite with Mg-rich metamorphic fluids having low δ26/24Mg values.The elemental and isotopic composition of the reactor output varied substantially during the experiment. We synthesize the mineralogical and fluid data using coupled mass-conservation equations solved at non-steady-state. Model calculations reveal an intricate balance between increasing specific surface area and decreasing mineral concentrations. While surface area normalized dissolution rate constants were time-invariant, specific surface area increased as a power-law function of time through positive feedbacks between mechanical disaggregation, chemical dissolution, and mineral depletion. Variations in dissolved δ44/40Ca, δ44/42Ca, and δ26/24Mg values reflect conservative mixing rather than fractionation. Apatite and calcite initially control δ44/40Ca and δ44/42Ca values, followed by biotite, titanite, epidote, hornblende, and plagioclase. The release of radiogenic 40Ca clearly defines the period where biotite dissolution dominates. The brucite layer of chlorite initially controls δ26/24Mg values, followed by biotite, the TOT layer of chlorite, and hornblende. Through direct isotopic tracking, these results demonstrate that trace minerals, such as apatite and calcite in the case of Ca and brucite in the case of Mg, dominate elemental release during the incipient stages of granite weathering. The results further show that biotite dissolution dominates the middle stages of granite weathering and that plagioclase dissolution only becomes important during relatively late stages. The Ca and Mg isotope variations associated with these stages are distinct and potentially resolvable in soil mineral weathering studies.  相似文献   

9.
A systematic investigation on silica contents and silicon isotope compositions of bamboos was undertaken. Seven bamboo plants and related soils were collected from seven locations in China. The roots, stem, branch and leaves for each plant were sampled and their silica contents and silicon isotope compositions were determined. The silica contents and silicon isotope compositions of bulk and water-soluble fraction of soils were also measured. The silica contents of studied bamboo organs vary from 0.30% to 9.95%. Within bamboo plant the silica contents show an increasing trend from stem, through branch, to leaves. In bamboo roots the silica is exclusively in the endodermis cells, but in stem, branch and leaves, the silica is accumulated mainly in epidermal cells. The silicon isotope compositions of bamboos exhibit significant variation, from −2.3‰ to 1.8‰, and large and systematic silicon isotope fractionation was observed within each bamboo. The δ30Si values decrease from roots to stem, but then increase from stem, through branch, to leaves. The ranges of δ30Si values within each bamboo vary from 1.0‰ to 3.3‰. Considering the total range of silicon isotope composition in terrestrial samples is only 7‰, the observed silicon isotope variation in single bamboo is significant and remarkable. This kind of silicon isotope variation might be caused by isotope fractionation in a Rayleigh process when SiO2 precipitated in stem, branches and leaves gradually from plant fluid. In this process the Si isotope fractionation factor between dissolved Si and precipitated Si in bamboo (αpre-sol) is estimated to be 0.9981. However, other factors should be considered to explain the decrease of δ30Si value from roots to stem, including larger ratio of dissolved H4SiO4 to precipitated SiO2 in roots than in stem. There is a positive correlation between the δ30Si values of water-soluble fractions in soils and those of bulk bamboos, indicating that the dissolved silicon in pore water and phytoliths in soil is the direct sources of silicon taken up by bamboo roots. A biochemical silicon isotope fractionation exists in process of silicon uptake by bamboo roots. Its silicon isotope fractionation factor (αbam-wa) is estimated to be 0.9988. Considering the distribution patterns of SiO2 contents and δ30Si values among different bamboo organs, evapotranspiration may be the driving force for an upward flow of a silicon-bearing fluid and silica precipitation. Passive silicon uptake and transportation may be important for bamboo, although the role of active uptake of silicic acid by roots may not be neglected. The samples with relatively high δ30Si values all grew in soils showing high content of organic materials. In contrast, the samples with relatively low δ30Si values all grew in soil showing low content of organic materials. The silicon isotope composition of bamboo may reflect the local soil type and growth conditions. Our study suggests that bamboos may play an important role in global silicon cycle.  相似文献   

10.
Over the last decade it has become apparent that Li isotopes may be a good proxy to trace silicate weathering. However, the exact mechanisms which drive the behaviour of Li isotopes in surface environments are not totally understood and there is a need to better calibrate and characterize this proxy. In this study, we analysed the Li concentrations and isotopic compositions in the various surface reservoirs (soils, rocks, waters and plants) of a small forested granitic catchment located in the Vosges Mountains (Strengbach catchment, France, OHGE http://ohge.u-strasbg.fr). Li fluxes were calculated in both soil profiles and at the basin scale and it was found that even in this forested basin, atmospheric inputs and litter fall represented a minor flux compared to input derived from the weathering of rocks and soil minerals (which together represent a minimum of 70% of dissolved Li). Li isotope ratios in soil pore waters show large depth dependent variations. Average dissolved δ7Li decreases from −1.1‰ to −14.4‰ between 0 and −30 cm, but is +30.7‰ at −60 cm. This range of Li isotopic compositions is very large and it encompasses almost the entire range of terrestrial Li isotope compositions that have been previously reported. We interpret these variations to result from both the dissolution and precipitation of secondary phases. Large isotopic variations were also measured in the springs and stream waters, with δ7Li varying from +5.3‰ to +19.6‰. δ7Li increases from the top to the bottom of the basin and also covaries with discharge at the outlet. These variations are interpreted to reflect isotopic fractionations occurring during secondary phase precipitation along the water pathway through the rocks. We suggest that the dissolved δ7Li increases with increasing residence time of waters through the rocks, and so with increasing time of interaction between waters and solids. A dissolution precipitation model was used to fit the dissolved Li isotopic compositions. It was found that the isotopic compositions of springs and stream waters are explicable by an isotopic fractionation of −5‰ to −14‰ (best fit −10.8‰), in agreement with Li incorporation into clay. In soil solutions, it was found that isotopic fractionation during secondary precipitation is larger (at least −23‰), suggesting a major role for different secondary phases, such as iron oxides that maybe incorporate Li with a higher isotope fractionation.  相似文献   

11.
Zinc isotopes have been studied along two smelter-impacted soil profiles sampled near one of the largest Pb and Zn processing plants in Europe located in northern France, about 50 km south of Lille. Mean δ66Zn values along these two soil profiles range from +0.22 ± 0.17‰ (2σ) to +0.34 ± 0.17‰ (2σ) at the lowest horizons and from +0.38 ± 0.45‰ (2σ) to +0.76 ± 0.14‰ (2σ) near the surface. The δ66Zn values in the lowest horizons of the soils are interpreted as being representative of the local geochemical background (mean value +0.31 ± 0.38‰), whereas heavier δ66Zn values near the surface of the two soils are related to anthropogenic Zn. This anthropogenic Zn occurs in the form of franklinite (ZnFe2O4)-bearing slag grains originating from processing wastes at the smelter site and exhibiting δ66Zn values of +0.81 ± 0.20‰ (2σ). The presence of franklinite is indicated by EXAFS analysis of the topsoil samples from both soil profiles as well as by micro-XANES analysis of the surface horizon of a third smelter-impacted soil from a distant site. These results indicate that naturally occurring Zn and smelter-derived Zn exhibit significantly different δ66Zn values, which suggests that zinc isotopes can be used to distinguish between geogenic and anthropogenic sources of Zn in smelter-impacted soils. In addition to a possible influence of additional past sources of light Zn (likely Zn-sulfides and Zn-sulfates directly emitted by the smelter), the light δ66Zn values in the surface horizons compared to smelter-derived slag materials are interpreted as resulting mainly from fractionation processes associated with biotic and/or abiotic pedological processes (Zn-bearing mineral precipitation, Zn complexation by organic matter, and plant uptake of Zn). This conclusion emphasizes the need for additional Zn isotopic studies before being able to use Zn isotopes to trace sources and pathways of this element in surface environments.  相似文献   

12.
The chemical weathering of primary Fe-bearing minerals, such as biotite and chlorite, is a key step of soil formation and an important nutrient source for the establishment of plant and microbial life. The understanding of the relevant processes and the associated Fe isotope fractionation is therefore of major importance for the further development of stable Fe isotopes as a tracer of the biogeochemical Fe cycle in terrestrial environments. We investigated the Fe mineral transformations and associated Fe isotope fractionation in a soil chronosequence of the Swiss Alps covering 150 years of soil formation on granite. For this purpose, we combined for the first time stable Fe isotope analyses with synchrotron-based Fe-EXAFS spectroscopy, which allowed us to interpret changes in Fe isotopic composition of bulk soils, size fractions, and chemically separated Fe pools over time in terms of weathering processes. Bulk soils and rocks exhibited constant isotopic compositions along the chronosequence, whereas soil Fe pools in grain size fractions spanned a range of 0.4‰ in δ56Fe. The clay fractions (<2 μm), in which newly formed Fe(III)-(hydr)oxides contributed up to 50% of the total Fe, were significantly enriched in light Fe isotopes, whereas the isotopic composition of silt and sand fractions, containing most of the soil Fe, remained in the range described by biotite/chlorite samples and bulk soils. Iron pools separated by a sequential extraction procedure covered a range of 0.8‰ in δ56Fe. For all soils the lightest isotopic composition was observed in a 1 M NH2OH-HCl-25% acetic acid extract, targeting poorly-crystalline Fe(III)-(hydr)oxides, compared with easily leachable Fe in primary phyllosilicates (0.5 M HCl extract) and Fe in residual silicates. The combination of the Fe isotope measurements with the speciation data obtained by Fe-EXAFS spectroscopy permitted to quantitatively relate the different isotope pools forming in the soils to the mineral weathering reactions which have taken place at the field site. A kinetic isotope effect during the Fe detachment from the phyllosilicates was identified as the dominant fractionation mechanism in young weathering environments, controlling not only the light isotope signature of secondary Fe(III)-(hydr)oxides but also significantly contributing to the isotope signature of plants. The present study further revealed that this kinetic fractionation effect can persist over considerable reaction advance during chemical weathering in field systems and is not only an initial transient phenomenon.  相似文献   

13.
The silicon isotopic composition of dissolved silicon and suspended particulate matter (SPM) were systematically investigated in water samples from the mainstem of the Yellow River and 4 major tributaries. The SPM content of the Yellow River varied from 1.4 to 38,560 mg/L, averaging 3568 mg/L, and the δ30Si of suspended particulate matter (δ30SiSPM) varied from 0.3‰ to −0.4‰, averaging −0.02‰. The major factors affecting the SPM content and the δ30SiSPM values in the Yellow River were inferred to be the mineralogical, chemical and isotopic characteristics of the sediments from the Loess Plateau and a combination of the climate and the flow discharge of the river.The major ions in the Yellow River water were Na+, Ca2+, Mg2+, HCO3−, SO42− and Cl−. High salt concentration was observed in samples from the middle and lower reaches, likely reflecting the effects of evaporation and irrigation because the Na+, Mg2+, SO42− and K+ concentrations were correlated with the Cl− concentration. The dissolved Si concentration (DSi) increased downstream, varying from 0.016 to 0.323 mM. The δ30Si of dissolved Si (δ30SiDiss) varied from 0.4‰ to 2.5‰, averaging 1.28‰. The major processes controlling the DSi and δ30SiDiss of the Yellow River are (a) the weathering of silicate rocks, (b) the formation of phytoliths in plants, (c) the evaporation of water from and the addition of meteoric water to the river system, which only affects concentrations, (d) the adsorption and desorption of aqueous monosilicic acid on iron oxide, and (e) the dissolution of phytoliths in soils.The DSi and δ30SiDiss values of global rivers vary spatially and temporally in response to changes in climate, chemical weathering intensity and biological activity. The moderately positive δ30SiDiss values observed in the Yellow River may be attributed to the higher rates of chemical weathering and biological activities that have been observed in this catchment in comparison with those of other previously studied catchments, excluding the Yangtze River. Human activities may also potentially influence chemical weathering and biological activities and affect the DSi and δ30SiDiss values of the major rivers of the world. Further river studies should be performed to gain a better understanding of the global Si isotope budget.  相似文献   

14.
We measured Ca stable isotope ratios (δ44/40Ca) in an ancient (2 My), hyperarid soil where the primary source of mobile Ca is atmospheric deposition. Most of the Ca in the upper meter of this soil (3.5 kmol m−2) is present as sulfates (2.5 kmol m−2), and to a lesser extent carbonates (0.4 kmol m−2). In aqueous extracts of variably hydrated calcium sulfate minerals, δ44/40CaE values (vs. bulk Earth) increase with depth (1.4 m) from a minimum of −1.91‰ to a maximum of +0.59‰. The trend in carbonate-δ44/40Ca in the top six horizons resembles that of sulfate-δ44/40Ca, but with values 0.1-0.6‰ higher. The range of observed Ca isotope values in this soil is about half that of δ44/40Ca values observed on Earth. Linear correlation among δ44/40Ca, δ34S and δ18O values indicates either (a) a simultaneous change in atmospheric input values for all three elements over time, or (b) isotopic fractionation of all three elements during downward transport. We present evidence that the latter is the primary cause of the isotopic variation that we observe. Sulfate-δ34S values are positively correlated with sulfate-δ18O values (R2 = 0.78) and negatively correlated with sulfate δ44/40CaE values (R2 = 0.70). If constant fractionation and conservation of mass with downward transport are assumed, these relationships indicate a δ44/40Ca fractionation factor of −0.4‰ in CaSO4. The overall depth trend in Ca isotopes is reproduced by a model of isotopic fractionation during downward Ca transport that considers small and infrequent but regularly recurring rainfall events. Near surface low Ca isotope values are reproduced by a Rayleigh model derived from measured Ca concentrations and the Ca fractionation factor predicted by the relationship with S isotopes. This indicates that the primary mechanism of stable isotope fractionation in CaSO4 is incremental and effectively irreversible removal of an isotopically enriched dissolved phase by downward transport during small rainfall events.  相似文献   

15.
Germanium-silicon fractionation in the weathering environment   总被引：1，自引：0，他引：1  
We present a detailed study of germanium behavior in the soil weathering environment as an important step toward using the Ge/Si system as a tracer of silicate weathering processes in both modern and ancient environments. Intensely weathered soils developed on Hawaiian basalts have bulk soil Ge/Si ratios 2 to 10 times higher than fresh basalt (e.g., 10 to 25 μmol/mol vs. 2.5 μmol/mol). Soil Ge concentrations increase with Si, and decrease with Fe, suggesting that Ge sequestration is related to accumulation of secondary soil silicates, rather than retention in soil Fe oxy-hydroxides. Sequential extractions of these soils suggest that Ge/Si fractionation takes place by Ge sequestration during the initial precipitation of secondary soil aluminosilicates (principally allophane). Further Si loss and changes in mineralogy as these soils age result in little additional Ge/Si fractionation. Ge/Si ratios in granitic soils and saprolites are strongly influenced by relative weathering rates of primary minerals. Kaolinite has a Ge/Si ratio (5.9 μmol/mol) higher than the plagioclase from which it forms (3.1 μmol/mol), whereas accumulation of primary quartz (Ge/Si 0.5 μmol/mol) prevents granitic soils from attaining high Ge/Si ratios. Laboratory synthesis of allophane confirms that Ge is preferentially partitioned into the solid phase upon precipitation of secondary aluminosilicates from solution.  相似文献   

16.
Reports of large Ca isotope fractionations between trees and soils prompted this study of a Boreal forest ecosystem near La Ronge, Saskatchewan, to improve understanding of this phenomenon. The results on five tree species (black spruce, trembling aspen, white spruce, jack pine, balsam poplar) confirm that nutrient Ca uptake by plants favors the light isotopes, thus driving residual Ca in plant available soil pools towards enrichment in the heavy isotopes. Substantial within-tree fraction occurs in tissues formed along the transpiration stream, with low δ44Ca values in fine roots (2 mm), intermediate values in stemwood, and high values in foliage. Separation factors between different plant tissues are similar between species, but the initial fractionation step in the tips of the fine roots is species specific, and/or sensitive to the local soil environment. Soil water δ44Ca values appear to increase with depth to at least 35 cm below the top of the forest floor, which is close to the deepest level of fine roots. The heavy plant fractionated signature of Ca in the finely rooted upper soils filters downward where it is retained on ion exchange sites, leached into groundwater, and discharged into surface waters.The relationship between Ca uptake by tree fine roots and the pattern of δ44Ca enrichment with soil depth was modeled for two Ca pools: the forest floor (litter) and the underlying (upper B) mineral soil. Six study plots were investigated along two hillside toposequences trending upwards from a first order stream. We used allometric equations describing the Ca distribution in boreal tree species to calculate weighted average δ44Ca values for the stands in each plot and estimate Ca uptake rates. The δ44Ca value of precipitation was measured, and soil weathering signatures deduced, by acid leaching of lower B mineral soils. Steady state equations were used to derive a set of model Ca fluxes and fractionation factors for each plot. The model reproduces the increase in δ44Ca with depth found in forest floor and upper B soil waters. Transient model runs show that the forest Ca cycle is sensitive to changes in plant Ca uptake rate, such as would occur during ontogeny or disturbance. Accordingly, secular records of δ44Ca in tree ring cellulose have the potential to monitor changes in the forest Ca cycle through time, thus providing a new tool for evaluating natural and anthropogenic impacts on forest health. Another model run shows that by changing the size of the isotope fractionation factor and adjusting for differences in forest productivity, that the range in Ca isotope fractionation in forested ecosystems reported in the literature, thus far, is reproduced. As a quantitative tool, the Ca cycling model produces a reasonable set of relative Ca fluxes for the La Ronge site, consistent with Environment Canada’s measurements for wet deposition in the region and simulated Ca release from soil mineral weathering using the PROFILE model. But the sensitivity of the model is limited by the small range of fractionation observed in this boreal shield setting of ∼1‰, which limits accuracy. If the model were applied to a site with a greater range in δ44Ca values among the principal Ca fluxes, it is capable of producing robust and reliable estimations of Ca fluxes that are otherwise difficult to measure in forested ecosystems.  相似文献   

17.
Large variations are reported in the B concentrations and isotopic ratios of river and thermal spring waters in Guadeloupe, Lesser Antilles. Rivers have δ11B values around 40‰ and B concentrations lower than 30 μg/L, while thermal springs have δ11B of 8–15‰ and B concentrations of 250–1000 μg/L. River samples strongly impacted by hydrothermal inputs have intermediate δ11B and B contents. None of these surface water samples have δ11B comparable to the local unweathered volcanic rocks (around 0‰), implying that a huge isotopic fractionation of 40‰ takes place during rock weathering, which could be explained by preferential incorporation of 10B during secondary mineral formation and adsorption on clays, during rock weathering or in the soils. The soil-vegetation B cycle could also be a cause for such a fractionation. Atmospheric B with δ11B of 45‰ represents 25–95% of the river B content. The variety of the thermal spring chemical composition renders the understanding of B behavior in Guadeloupe hydrothermal system quite difficult. Complementary geochemical tracers would be helpful.  相似文献   

18.
Pillow basalt and chert form integral lithologies comprising many Archean greenstone belt packages. To investigate details of these lithologies in the >3.7 Ga Isua Greenstone Belt, SW Greenland, we measured silicon isotope compositions of quartz crystals, by secondary ion mass spectrometry, from a quartz‐cemented, quartz‐amygdaloidal basaltic pillow breccia, recrystallized chert and chert clasts thought to represent silica precipitation under hydrothermal conditions. The recrystallized chert, chert clasts and quartz cement have overlapping δ30Si values, while the δ30Si values of the quartz amygdules span nearly the entire range of previously published values for quartz precipitates of any age, despite amphibolite facies metamorphism. We suggest that the heterogeneity is derived from kinetic isotope fractionation during quartz precipitation under disequilibrium conditions in a hydrothermal setting, consistent with the pillow breccia origin. On the basis of the present data, we conclude that the geological context of each sample must be carefully evaluated when interpreting δ30Si values of quartz.  相似文献   

19.
Germanium-silicon (Ge/Si) ratios were determined on quartz diorite bedrock, saprolite, soil, primary and secondary minerals, phytolith, soil and saprolite pore waters, and spring water and stream waters in an effort to understand Ge/Si fractionation during weathering of quartz diorite in the Rio Icacos watershed, Puerto Rico. The Ge/Si ratio of the bedrock is 2 μmol/mol, with individual primary mineral phases ranging between 0.5 and 7 μmol/mol. The ratios in the bulk saprolite are higher (∼3 μmol/mol) than values measured in the bedrock. The major saprolite secondary mineral, kaolinite, has Ge/Si ratios ranging between 4.8 and 6.1 μmol/mol. The high Ge/Si ratios in the saprolite are consistent with preferential incorporation of Ge during the precipitation of kaolinite. Bulk shallow soils have lower ratios (1.1-1.6 μmol/mol) primarily due to the residual accumulation of Ge-poor quartz.Ge/Si ratios measured on saprolite and soil pore waters reflect reactions that take place during mineral transformations at discrete depths. Spring water and baseflow stream waters have the lowest Ge/Si ratios (0.27-0.47 μmol/mol), reflecting deep initial weathering reactions resulting in the precipitation of Ge-enriched kaolinite at the saprolite-bedrock interface. Mass-balance calculations on saprolite require significant loss of Si and Al even within 1 m above the saprolite-bedrock interface. Higher pore water Ge/Si ratios (∼1.2 μmol/mol) are consistent with partial dissolution of this Ge-enriched kaolinite. Pore water Ge/Si ratios increase up through the saprolite and into the overlying soil, but never reach the high values predicted by mass balance, perhaps reflecting the influence of phytolith recycling in the shallow soil.  相似文献   

20.
Basalt weathering in Central Siberia under permafrost conditions   总被引：2，自引：0，他引：2  
Chemical weathering of basalts in the Putorana Plateau, Central Siberia, has been studied by combining chemical and mineralogical analysis of solids (rocks, soils, river sediments, and suspended matter) and fluid solution chemistry. Altogether, 70 large and small rivers, 30 soil pore waters and groundwaters and over 30 solids were sampled during July to August 2001. Analysis of multiannual data on discharge and chemical composition of several rivers of the region available from the Russian Hydrological Survey allowed rigorous estimation of mean annual major element concentrations, and dissolved and suspended fluxes associated with basalt weathering. For the rivers Tembenchi and Taimura that drain monolithologic basic volcanic rocks, the mean multiannual flux of total dissolved cations (TDS_c = Ca + Mg + Na + K) corrected for atmospheric input is 5.7 ± 0.5 t/km2/yr. For the largest river Nizhniya Tunguska—draining essentially basic rocks—the TDS_c is 6.1 ± 1.5 t/km2/yr. The overall CO2 consumption flux associated with basalt weathering in the studied region (∼700,000 km2) achieves 0.08 × 1012 mol/yr, which represents only 2.6% of the total CO2 consumption associated with basalt weathering at the Earth’s surface. The fluxes of suspended matter were estimated as 3.1 ± 0.5, 9.0 ± 0.8, and 6.5 ± 2.0 t/km2/yr for rivers Taimura, Eratchimo, and Nizhniya Tunguska, respectively. Based on chemical analyses of river solutes and suspended matter, the relative dissolved versus particulate annual transport of major components is Cinorg ≥ Corg > Na + K > Ca > Mg > Si > Fe ≥ Mn ≥ Ti ≥ Al which reflects the usual order of element mobility during weathering.According to chemical and mineralogical soil and sediment analyses, alteration of basalt consists of (1) replacement of the original basaltic glass by Si-Al-Fe rich amorphous material, (2) mechanical desegregation and grinding of parent rocks, leading to accumulation of “primary” hydrothermal trioctahedral smectite, and (3) transformation of these trioctahedral (oxy)smectites and mixed-layer chlorite-smectite, into secondary dioctahedral smectite accompanied by removal of Ca, Mg, and Fe, and enrichment in Al. No vertical chemical differentiation of fluid and solid phases within the soil profile was identified. All sampled soil pore waters and groundwaters were found to be close to equilibrium with respect to chalcedony, gibbsite, halloysite, and allophanes, but strongly supersaturated with respect to goethite, nontronite, and montmorillonite.Over the annual cycle, the contribution of atmospheric precipitation, permafrost melting, underground reservoirs, litter degradation, and rock and soil mineral weathering for the overall TDS_c transport in the largest river of the region (Nizhniya Tunguska) is 9.3 ± 3, 10 ± 5, 10.5 ± 5, 25 ± 20, and 45 ± 30%, respectively. In the summertime, direct contribution of rocks and soil mineral weathering via solid/fluid interaction does not exceed 20%. The main unknown factors of element mobilization from basalt to the river is litter degradation in the upper soil horizon and parameters of element turnover in the vegetation.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号