首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Adsorption of Rb+ and Sr2+ at the orthoclase (0 0 1)-solution interface is probed with high-resolution X-ray reflectivity and resonant anomalous X-ray reflectivity. Specular X-ray reflectivity data for orthoclase in contact with 0.01 m RbCl solution at pH 5.5 reveal a systematic increase in electron density adjacent to the mineral surface with respect to that observed in contact with de-ionized water (DIW). Quantitative analysis indicates that Rb+ adsorbs at a height of 0.83 ± 0.03 Å with respect to the bulk K+ site with a nominal coverage of 0.72 ± 0.10 ions per surface unit mesh (55.7 Å2). These results are consistent with an ion-exchange reaction in which Rb+ occupies an inner-sphere adsorption (IS) site. In contrast, X-ray reflectivity data for orthoclase in contact with 0.01 m Sr(NO3)2 solution at pH 5.3 reveal few significant changes with respect to DIW. Resonant anomalous X-ray reflectivity was used to probe Sr2+ adsorption and to image its vertical distribution. This element-specific measurement reveals that Sr2+ adsorbs with a total coverage of 0.37 ± 0.02 ions per surface unit mesh, at a substantially larger height (3.28 ± 0.05 Å) than found for Rb+, and with a relatively broad density distribution (having a root-mean-square width of 1.88 ± 0.08 Å for a single-peak model), implying that Sr2+ adsorbs primarily as a fully-hydrated outer-sphere (OS), species. Comparison to a two-height model suggests that 13 ± 5% of the adsorbed Sr2+ may be present as an IS species. This partitioning implies a ∼5 kJ/mol difference in free energy between the IS and OS Sr2+ on orthoclase. Differences in the partitioning of Sr2+ between IS and OS species for orthoclase (0 0 1) and muscovite (0 0 1) suggest control by the geometry of the IS adsorption site. Results for the OS distribution are compared to predictions of the Poisson-Boltzmann equation in the strong coupling regime, which predicts an intrinsically narrow vertical diffuse ion distribution; the OS distribution might thus be thought of as the diffuse ion profile in the limit of high surface charge.  相似文献   

2.
The structure and mechanism of cation sorption at the (0 0 1) muscovite-water interface were investigated in 0.01 and 0.5 m KCl, CsCl, and CaCl2 and 0.01 m BaCl2 solutions at slightly acidic pH by high-resolution X-ray reflectivity. Structural relaxations of atom positions in the 2M1 muscovite were small (?0.07 Å) and occurred over a distance of 30 to 40 Å perpendicular to the interface. Cations in all solutions were sorbed dominantly in the first and second solution layers adjacent to the mineral surface. The derived heights of the first solution layer in KCl and CsCl solutions, 1.67(6)-1.77(7) and 2.15(9)-2.16(2) Å, respectively, differ in magnitude by the approximate difference in crystallographic radii between K and Cs, and correspond closely to the interlayer cation positions in bulk K- and Cs-mica structures. The first solution layer heights in CaCl2 and BaCl2 solutions, 2.46(5)-2.56(11) and 2.02(5) Å, respectively, differ in a sense opposite to that expected based on crystallographic or hydrated radii of the divalent cations. The derived ion heights in all solutions imply that there is no intercalated water layer between the first solution layer and the muscovite surface. Molecular compositions were assigned to the first two solution layers in the electron density profiles using models that constrain the number density of sorbed cations, water molecules, and anions by considering the permanent negative charge of the muscovite and average solution density. The models result in partial charge balance (at least 50%) by cations sorbed in the first two layers in the 0.01 m solutions and approximately full charge balance in the 0.5 m solutions. Damped oscillations of model water density away from the first two solution layers agree with previous X-ray reflectivity results on the muscovite (0 0 1) surface in pure water.  相似文献   

3.
Molecular-scale distributions of Sr2+ and fulvic acid (FA) adsorbed on the muscovite (0 0 1) surface were investigated using in situ specular X-ray reflectivity (XR) and resonant anomalous X-ray reflectivity (RAXR). The total amount of Sr2+ adsorbed from a 1 × 10−2 mol/kg SrCl2 and 100 mg/kg Elliott Soil Fulvic Acid II (ESFA II) solution at pH 5.5 compensated 81 ± 5% of the muscovite surface charge, less than previously measured (118 ± 5%) in an ESFA II-free solution with the same Sr concentration and pH. Inner-sphere (IS) and outer-sphere (OS) Sr2+ constituted 87% of the total adsorbed species in IS:OS proportions of 19:81 compared to 42:58 in the solution without FA, suggesting that adsorbed FA competes with the IS Sr2+ for surface sites. The coverage of both IS and OS Sr2+ decreased even more in a pH 3.5 solution containing the same concentration of FA and 0.5 × 10−2 mol/kg Sr(NO3)2, whereas a significant amount of Sr2+ accumulated farther from the surface in the FA layer. The amount of Sr2+ incorporated in the ∼10 Å thick FA layer decreased by 79% with decreasing FA concentration (100 → 1 mg/kg) and increasing Sr2+ concentration (0.5 × 10−2 → 1 × 10−2 mol/kg) and pH (3.5 → 3.6). These results indicate not only that adsorbed FA molecules (and perhaps also H3O+) displace Sr2+ near the muscovite surface, but also that the sorbed FA film provides binding sites for additional Sr2+ away from the surface. When a muscovite crystal pre-coated with FA after reaction in a 100 mg/kg ESFA II solution for 50 h was subsequently reacted with a 0.5 × 10−2 mol/kg Sr(NO3)2 and 100 mg/kg ESFA II solution at pH 3.7, a significant fraction of Sr2+ was distributed in the outer part of the FA film similar to that observed on fresh muscovite reacted at pH 3.5 with a pre-mixed Sr-FA solution at the same concentrations. However, this Sr2+ sorbed in the pre-adsorbed organic film was more widely distributed and had a lower coverage, suggesting that pre-sorbed FA may undergo fractionation and/or conformational changes that diminish its capacity, and that of the muscovite (0 0 1) surface, for adsorbing the aqueous Sr cation.  相似文献   

4.
Monte Carlo simulations show that the adsorption position of the Sr2+ or Ba2+ ion on the cleaved muscovite surface is determined by the radius of the ion’s first hydration shell, hydrogen bonding of the first shell water molecules with the basal oxygens of muscovite as well as a requirement of minimization of the number of muscovite’s lattice cations in the ion’s first coordination shell. Accordingly, Sr2+ or Ba2+ adsorbs in ditrigonal cavities at a distance of 1.12 Å or 1.35 Å, respectively, from the basal surface on dehydrated mica and above tetrahedral substitutions at a height of 1.93 ± 0.02 Å or 2.15 ± 0.03 Å, respectively, at the highest simulated water coverage of 28 H2O per ion. The ion’s displacement from a ditrigonal cavity occurs upon adsorption of 2 H2O per ion for Sr2+ and 3 H2O per ion for Ba2+. At a coverage of 28 H2O per ion, outer-sphere adsorption of Sr2+ or Ba2+ at a height of 3.9 ± 0.2 Å or 4.17 ± 0.07 Å, respectively, is possible albeit unfavorable on the free energy scale by 107 ± 7 kJ/mol or 89 ± 13 kJ/mol, respectively, as compared to inner-sphere adsorption. Activation energies for the transformation between inner-sphere and outer-sphere adsorptions are calculated to be 121 ± 3 kJ/mol for Sr2+ and 99 ± 10 kJ/mol for Ba2+. A comparison of these values with those reported recently for Mg2+ and Ca2+ results in an adsorption affinity sequence Mg2+ > Ca2+ > Sr2+ > Ba2+ in agreement with the sequence predicted recently for low dielectric constant solids (which include mica) (Sverjensky, 2006). A recent resonant anomalous X-ray reflectivity study of Sr2+ adsorption on muscovite (Park et al., 2006) has questioned the common assumption (Stumm, 1992), which is supported by the present simulation results, that inner-sphere adsorption is stronger than outer-sphere adsorption. A modification of the cleaved muscovite surface as a result of Sr2+ adsorption in muscovite’s ditrigonal cavities and related destabilization of muscovite’s hydroxyl groups is proposed as a possible reason for this controversy.  相似文献   

5.
Molecular dynamics simulations of water in contact with the (0 0 1) and (0 1 0) surfaces of orthoclase (KAlSi3O8) were carried out to investigate the structure and dynamics of the feldspar-water interface, contrast the intrinsic structural properties of the two surfaces, and provide a basis for future work on the diffusion of ions and molecules in microscopic mineral fractures. Electron density profiles were computed from the molecular dynamics trajectories and compared with those derived experimentally from high-resolution X-ray reflectivity measurements by Fenter and co-workers [Fenter P., Cheng L., Park C., Zhang H. and Sturchio N. C. (2003a) Structure of the orthoclase (0 0 1)- and (0 1 0)-water interfaces by high-resolution X-ray reflectivity. Geochim. Cosmochim. Acta67, 4267-4275]. For each surface, three scenarios were considered whereby the interfacial species is potassium, water, or a hydronium ion. Excellent agreement was obtained for the (0 0 1) surface when potassium is the predominant interfacial species; however, some discrepancies in the position of the interfacial peaks were obtained for the (0 1 0) surface. The two surfaces showed similarities in the extent of water ordering at the interface, the activation energies for water and potassium desorption, and the adsorption localization of interfacial species. However, there are also important differences between the two surfaces in the coordination of a given adsorbed species, adsorption site densities, and the propensity for water molecules in surface cavities and those in the first hydration layer to coordinate to surface bridging oxygen atoms. These differences may have implications for the extent of dissolution in the low-pH regime since hydrolysis of Si(Al)OSi(Al) bonds is a major dissolution mechanism.  相似文献   

6.
The surface structure of α-Fe2O3(0 0 0 1) was studied using crystal truncation rod (CTR) X-ray diffraction before and after reaction with aqueous Fe(II) at pH 5. The CTR results show the unreacted α-Fe2O3(0 0 0 1) surface consists of two chemically distinct structural domains: an O-layer terminated domain and a hydroxylated Fe-layer terminated domain. After exposing the α-Fe2O3(0 0 0 1) surface to aqueous Fe(II), the surface structure of both co-existing structural domains was modified due to adsorption of Fe at crystallographic lattice sites of the substrate, resulting in six-coordinated adsorbed Fe at the surface. The average Fe-O bond lengths of the adsorbed Fe are consistent with typical Fe(III)-O bond lengths (in octahedral coordination), providing evidence for the oxidation of Fe(II) to Fe(III) upon adsorption. These results highlight the important role of substrate surface structure in controlling Fe(II) adsorption. Furthermore, the molecular scale structural characterization of adsorbed Fe provides insight into the process of Fe(II) induced structural modification of hematite surfaces, which in turn aids in assessing the effective reactivity of hematite surfaces in Fe(II) rich environments.  相似文献   

7.
Jarosite is an important mineral on Earth, and possibly on Mars, where it controls the mobility of iron, sulfate and potentially toxic metals. Atomistic simulations have been used to study the incorporation of Al3+, and the M2+ impurities Cd, Cu and Zn, in the (0 1 2) and (0 0 1) surfaces of jarosite. The calculations show that the incorporation of Al on an Fe site is favorable on all surfaces in which terminal Fe ions are exposed, and especially on the (0 0 1) [Fe3(OH)3]6+ surface. Incorporation of Cd, Cu or Zn on a K site balanced by a K vacancy is predicted to stabilize the surfaces, but calculated endothermic solution energies and the high degree of distortion of the surfaces following incorporation suggest that these substitutions will be limited. The calculations also suggest that incorporation of Cd, Cu and Zn on an Fe site balanced by an OH vacancy, or by coupled substitution on both K and Fe sites, is unfavorable, although this might be compensated for by growth of a new layer of jarosite or goethite, as predicted for bulk jarosite. The results of the simulations show that surface structure will exert an influence on uptake of impurities in the order Cu > Cd > Zn, with the most favorable surfaces for incorporation being (0 1 2) [KFe(OH)4]0 and (0 0 1) [Fe3(OH)3]6+.  相似文献   

8.
The interfacial structures of the basal surface of muscovite mica in solutions containing (1) 5 × 10−3 m BaCl2, (2) 500 ppm Elliott Soil Fulvic Acid I (ESFA I), (3) 100 ppm Elliott Soil Fulvic Acid II (ESFA II), (4) 100 ppm Pahokee Peat Fulvic Acid I (PPFA), and (5) 5 × 10−3 m BaCl2 and 100 ppm ESFA II were obtained with high resolution in-situ X-ray reflectivity. The derived electron-density profile in BaCl2 shows two sharp peaks near the mica surface at 1.98(2) and 3.02(4) Å corresponding to the heights of a mixture of Ba2+ ions and water molecules adsorbed in ditrigonal cavities and water molecules coordinated to the Ba2+ ions, respectively. This pattern indicates that most Ba2+ ions are adsorbed on the mica surface as inner-sphere complexes in a partially hydrated form. The amount of Ba2+ ions in the ditrigonal cavities compensates more than 90% of the layer charge of the mica surface. The electron-density profiles of the fulvic acids (FAs) adsorbed on the mica surface, in the absence of Ba2+, had overall thicknesses of 4.9-10.8 Å and consisted of one broad taller peak near the surface (likely hydrophobic and positively-charged groups) followed by a broad humped pattern (possibly containing negatively-charged functional groups). The total interfacial electron density and thickness of the FA layer increased as the solution FA concentration increased. The sorbed peat FA which has higher ash content showed a higher average electron density than the sorbed soil FA. When the muscovite reacted with a pre-mixed BaCl2-ESFA II solution, the positions of the two peaks nearest the surface matched those in the BaCl2 solution. However, the occupancy of the second peak decreased by about 30% implying that the hydration shell of surface-adsorbed Ba2+ was partially substituted by FA. The two surface peaks were followed by a broad less electron-dense layer suggesting a sorption mechanism in which Ba2+ acts dominantly as a bridging cation between the mica surface and FA. When the muscovite reacted first with FA and subsequently with BaCl2, more Ba2+ could be adsorbed on the FA-coated mica surface. The peak closest to the mica included Ba2+ ions adsorbed directly on the mica in an amount similar to that in the BaCl2 solution but more broadly distributed. A second peak observed within the FA layer suggests that the FA coating provides additional sites for Ba2+ sorption. The results indicate that enhanced uptake of heavy metals can occur when an organic coating already exists on a mineral surface.  相似文献   

9.
The fate of the oxoanion arsenate in diverse systems is strongly affected by its adsorption on the surfaces of iron (oxyhydr)oxide minerals. Predicting this behavior in the environment requires an understanding of the mechanisms of arsenate adsorption. In this study, the binding site and adsorption geometry of arsenate on the hematite (0 1 2) surface is investigated. The structure and termination of the hematite (0 1 2)-water interface were determined by high resolution X-ray reflectivity, revealing that two distinct terminations exist in a roughly 3:1 proportion. The occurrence of multiple terminations appears to be a result of sample preparation, and is not intrinsic to the hematite (0 1 2) surface. X-ray standing wave (XSW) measurements were used to determine the registry of adsorbed arsenate to the hematite structure, and thus the binding site and geometry of the resulting surface complex. Arsenate forms a bridging bidentate complex on two adjacent singly coordinated oxygen groups on each of the two distinct terminations present at the hematite surface. Although this geometry is consistent with that seen in past studies, the derived As-Fe distances are longer, the result of the topology of the FeO6 octahedra on the (0 1 2) surface. As EXAFS-derived As-Fe distances are often used to determine the adsorption mechanism in environmental samples (e.g., mine tailings, contaminated sediments), this demonstrates the importance of considering the possible sorbent surface structures and arrangements of adsorbates when interpreting such data.As multiple functional groups are present and multiple binding geometries are possible on the hematite (0 1 2) surface, the XSW data suggest that formation of bridging bidentate surface complexes on singly coordinated oxygen sites is the preferred adsorption mechanism on this and most other hematite surfaces (provided those surfaces contain adjacent singly coordinated oxygen groups). These measurements also constrain the likely reaction stoichiometry, with only the protonation state of the surface complex undetermined. Although bridging bidentate inner-sphere surface complexes comprised the majority of the adsorbed arsenate present on the hematite (0 1 2) surface, there is an additional population of sorbed arsenate species that could not be characterized by the XSW measurements. These species are likely more disordered, and thus more weakly bound, than the bridging bidentate complexes, and may play a role in determining the fate, transport, and bioavailability of arsenate in the environment. Finally, the possibility of obtaining species-specific XSW measurements by tuning the incident beam energy to specific features in a XANES spectrum is described.  相似文献   

10.
Aqueous Co(II) chloride complexes play a crucial role in cobalt transport and deposition in ore-forming hydrothermal systems, ore processing plants, and in the corrosion of special Co-bearing alloys. Reactive transport modelling of cobalt in hydrothermal fluids relies on the availability of thermodynamic properties for Co complexes over a wide range of temperature, pressure and salinity. Synchrotron X-ray absorption spectroscopy was used to determine the speciation of cobalt(II) in 0-6 m chloride solutions at temperatures between 35 and 440 °C at a constant pressure of 600 bar. Qualitative analysis of XANES spectra shows that octahedral species predominate in solution at 35 °C, while tetrahedral species become increasingly important with increasing temperature. Ab initio XANES calculations and EXAFS analyses suggest that in high temperature solutions the main species at high salinity (Cl:Co >> 2) is CoCl42−, while a lower order tetrahedral complex, most likely CoCl2(H2O)2(aq), predominates at low salinity (Cl:Co ratios ∼2). EXAFS analyses further revealed the bonding distances for the octahedral Co(H2O)62+ (octCo-O = 2.075(19) Å), tetrahedral CoCl42− (tetCo-Cl = 2.252(19) Å) and tetrahedral CoCl2(H2O)2(aq) (tetCo-O = 2.038(54) Å and tetCo-Cl = 2.210(56) Å). An analysis of the Co(II) speciation in sodium bromide solutions shows a similar trend, with tetrahedral bromide complexes becoming predominant at higher temperature/salinity than in the chloride system. EXAFS analysis confirms that the limiting complex at high bromide concentration at high temperature is CoBr42−. Finally, XANES spectra were used to derive the thermodynamic properties for the CoCl42− and CoCl2(H2O)2(aq) complexes, enabling thermodynamic modelling of cobalt transport in hydrothermal fluids. Solubility calculations show that tetrahedral CoCl42− is responsible for transport of cobalt in hydrothermal solutions with moderate chloride concentration (∼2 m NaCl) at temperatures of 250 °C and higher, and both cooling and dilution processes can cause deposition of cobalt from hydrothermal fluids.  相似文献   

11.
For the purpose of improving fundamental understanding of the redox reactivity of magnetite, quantum-mechanical calculations were applied to predict Fe2+ availability and electron hopping rates at magnetite (1 0 0) surfaces, with and without the presence of adsorbed water. Using a low free energy surface reconstruction (½-Fetet layer relaxed into the Feoct (1 0 0) plane), the relaxed outermost layer of both the hydrated and vacuum-terminated surfaces were found to be predominantly enriched in Fe2+ within the octahedral sublattice, irrespective of the presence of adsorbed water. At room temperature, mobile electrons move through the octahedral sublattice by Fe2+-Fe3+ valence interchange small polaron hopping, calculated at 1010-1012 hops/s for bulk and bulk-like (i.e., near-surface) environments. This process is envisioned to control sustainable overall rates of interfacial redox reactions. These rates decrease by up to three orders of magnitude (109 hops/s) at the (1 0 0) surface, and no significant difference is observed for vacuum-terminated versus hydrated cases. Slower hopping rates at the surface appear to arise primarily from larger reorganization energies associated with octahedral Fe2+-Fe3+ valence interchange in relaxed surface configurations, and secondarily on local charge distribution patterns surrounding Fe2+-Fe3+ valence interchange pairs. These results suggest that, with respect to the possibility that the rate and extent of surface redox reactions depend on Fe2+ availability and its replenishment rate, bulk electron hopping mobility is an upper-limit for magnetite and slower surface rates may need to be considered as potentially rate-limiting. They also suggest that slower hopping mobilities calculated for surface environments may be amenable to Fe2+-Fe3+ site discrimination by conventional spectroscopic probes.  相似文献   

12.
The behavior of ammonium, NH4+, in aqueous systems was studied based on Raman spectroscopic experiments to 600 °C and about 1.3 GPa. Spectra obtained at ambient conditions revealed a strong reduction of the dynamic three-dimensional network of water with addition of ammonium chloride, particularly at small solute concentrations. The differential scattering cross section of the ν1-NH4+ Raman band in these solutions was found to be similar to that of salammoniac.The Raman band of silica monomers at ∼780 cm−1 was present in all spectra of the fluid at high temperatures in hydrothermal diamond-anvil cell experiments with H2O ± NH4Cl and quartz or the assemblage quartz + kyanite + K-feldspar ± muscovite/tobelite. However, these spectra indicated that dissolved silica is less polymerized in ammonium chloride solutions than in comparable experiments with water. Quantification based on the normalized integrated intensity of the H4SiO40 band showed that the silica solubility in experiments with H2O + NH4Cl was significantly lower than that in equimolal NaCl solutions. This suggests that ammonium causes a stronger decrease in the activity of water in chloridic solutions than sodium.The Raman spectra of the fluid also showed that a significant fraction of ammonium was converted to ammonia, NH3, in all experiments at temperatures above 300 °C. This indicates a shift towards acidic conditions for experiments without a buffering mineral assemblage. The estimated pH of the fluid was ∼2 at 600 °C, 0.26 GPa, 6.6 m initial NH4Cl, based on the ratio of the integrated ν1-NH3 and ν1-NH4+ intensities and the HCl0 dissociation constant. The NH3/NH4+ ratio increased with temperature and decreased with pressure. This implies that more ammonium should be retained in K-bearing minerals coexisting with chloridic fluids upon high-P low-T metamorphism. At 500 °C, 0.73 GPa, ammonium partitions preferentially into the fluid, as constrained from infrared spectroscopy on the muscovite and from mass balance.The conversion of K-feldspar to muscovite proceeded much faster in experiments with NH4Cl solutions than in comparable experiments with water. This is interpreted as being caused by enhancement of the rate-limiting alumina solubility, suggesting complexation of Al with NH4. Nucleation and growth of mica at the expense of K-feldspar and NH4+/K+ exchange between fluid and K-feldspar occurred simultaneously, but incorporation of NH4+ into K-feldspar was distinctly faster than K-feldspar consumption.  相似文献   

13.
The sorption of Eu(III) onto kaolinite and montmorillonite was investigated up to 150 °C. The clays were purified samples, saturated with Na in the case of montmorillonite. Batch experiments were conducted at 25, 40, 80 and 150 °C in 0.5 M NaClO4 solutions to measure the distribution coefficients (Kd) of Eu as a trace element (<10−6 mol/L) between the solution and kaolinite. For the Na-montmorillonite, we used Kd results from a previous study [Tertre, E., Berger, G., Castet, S., Loubet, M., Giffaut, E., 2005. Experimental study of adsorption of Ni2+, Cs+ and Ln3+ onto Na-montmorillonite up to 150 °C. Geochim. Cosmochim. Acta69, 4937-4948] obtained under exactly the same conditions. The number and nature of the Eu species sorbed onto both clay minerals were investigated by time resolved laser fluorescence spectroscopy (TRLFS) in specific experiments in the same temperature range. We identified a unique inner-sphere complex linked to the aluminol sites in both clays, assumed to be AlOEu2+ at the edge of the particles, and a second exchangeable outer-sphere complex for montmorillonite, probably in an interlayer position. The Kd values were used to adjust the parameters of a surface complexation model (DLM: diffuse layer model) from 25 to 150 °C. The number of Eu complexes and the stoichiometry of reactions were constrained by TRLFS. The acidity constants of the amphoteric aluminol sites were taken from another study [Tertre, E., Castet, S., Berger, G., Loubet, M., Giffaut, E. Acid/base surface chemistry of kaolinite and Na-montmorillonite at 25 and 60 °C: experimental study and modelling. Geochim. Cosmochim. Acta, in press], which integrates the influence of the negative structural charge of clays on the acid/base properties of edge sites as a function of temperature and ionic strength. The results of the modelling show that the observed shift of the sorption edge towards low pH with increasing temperature results solely from the contribution of the AlOEu2+ edge complexes. Finally, we successfully tested the performance of our model by confronting the predictions with experimental Kd data. We used our own data obtained at lower ionic strength (previous study) or higher suspension density and higher starting concentration (TRLFS runs, this study), as well as published data from other experimental studies [Bradbury, M.H., Baeyens, B., 2002. Sorption of Eu on Na and Ca-montmorillonite: experimental investigations and modeling with cation exchange and surface complexation. Geochim. Cosmochim. Acta66, 2325-2334; Kowal-Fouchard, A., 2002. Etude des mécanismes de rétention des ions U(IV) et Eu(III) sur les argiles: influence des silicates. Ph.D. Thesis, Université Paris Sud, France, 330p].  相似文献   

14.
High-purity synthetic barite powder was added to pure water or aqueous solutions of soluble salts (BaCl2, Na2SO4, NaCl and NaHCO3) at 23 ± 2 °C and atmospheric pressure. After a short pre-equilibration time (4 h) the suspensions were spiked either with 133Ba or 226Ra and reacted under constant agitation during 120-406 days. The pH values ranged from 4 to 8 and solid to liquid (S/L) ratios varied from 0.01 to 5 g/l. The uptake of the radiotracers by barite was monitored through repeated sampling of the aqueous solutions and radiometric analysis. For both 133Ba and 226Ra, our data consistently showed a continuous, slow decrease of radioactivity in the aqueous phase.Mass balance calculations indicated that the removal of 133Ba activity from aqueous solution cannot be explained by surface adsorption only, as it largely exceeded the 100% monolayer coverage limit. This result was a strong argument in favor of recrystallization (driven by a dissolution-precipitation mechanism) as the main uptake mechanism. Because complete isotopic equilibration between aqueous solution and barite was approached or even reached in some experiments, we concluded that during the reaction all or substantial fractions of the initial solid had been replaced by newly formed barite.The 133Ba data could be successfully fitted assuming constant recrystallization rates and homogeneous distribution of the tracer into the newly formed barite. An alternative model based on partial equilibrium of 133Ba with the mineral surface (without internal isotopic equilibration of the solid) could not reproduce the measured activity data, unless multistage recrystallization kinetics was assumed. Calculated recrystallization rates in the salt solutions ranged from 2.8 × 10−11 to 1.9 × 10−10 mol m−2 s−1 (2.4-16 μmol m−2 d−1), with no specific trend related to solution composition. For the suspensions prepared in pure water, significantly higher rates (∼5.7 × 10−10 mol m−2 s−1 or ∼49 μmol m−2 d−1) were determined.Radium uptake by barite was determined by monitoring the decrease of 226Ra activity in the aqueous solution with alpha spectrometry, after filtration of the suspensions and sintering. The evaluation of the Ra uptake experiments, in conjunction with the recrystallization data, consistently indicated formation of non-ideal solid solutions, with moderately high Margules parameters (WAB = 3720-6200 J/mol, a0 = 1.5-2.5). These parameters are significantly larger than an estimated value from the literature (WAB = 1240 J/mol, a0 = 0.5).In conclusion, our results confirm that radium forms solid solutions with barite at fast kinetic rates and in complete thermodynamic equilibrium with the aqueous solutions. Moreover, this study provides quantitative thermodynamic data that can be used for the calculation of radium concentration limits in environmentally relevant systems, such as radioactive waste repositories and uranium mill tailings.  相似文献   

15.
The soluble and insoluble hydrolysis products of palladium were investigated in aqueous solutions of 0.6 mol kg−1 NaCl at 298.2 K. Potentiometric titrations of millimolal palladium(II) solutions were used to monitor hydrolysis reactions of the mononuclear PdCl3OH2− and species. Spectrophotometric titrations were also used to corroborate the speciation change and to extract the correlative molar absorption coefficients for the PdCl3OH2− species in the 210-320 nm range. Longer-term potentiometric titrations systematically yielded precipitates which matured over a period of 6 weeks and resulted in a more extensive release of protons to the solution. Precipitation experiments in the 3-11 pH range showed the dominant precipitating phase to be Pd(OH)1.72Cl0.28. EXAFS measurements yielded an average of 3.50 O and 0.50 Cl atoms per Pd atom with a Pd-O distance of 2.012 Å and a Pd-Cl distance of 2.185 Å. Speciation modeling of proton and palladium mass balance data of experiments for palladium concentrations ranging from 0.047 to 10.0  mmol kg−1 required the presence of polynuclear complexes containing 3-9 palladium atoms. The existence of such complexes is moreover supported by previous investigations of palladium hydroxide chains of the type [Pd(OH)1.72Cl0.28]n, that are coiled and/or aggregated into nanometer-sized (15-40 Å) spheroids.  相似文献   

16.
This study used batch reactors to quantify the mechanisms and rates of calcite dissolution in the presence and absence of a single heterotrophic bacterial species (Burkholderia fungorum). Experiments were conducted at T = 28°C and ambient pCO2 over time periods spanning either 21 or 35 days. Bacteria were supplied with minimal growth media containing either glucose or lactate as a C source, NH4+ as an N source, and H2PO4− as a P source. Combining stoichiometric equations for microbial growth with an equilibrium mass-balance model of the H2O-CO2-CaCO3 system demonstrates that B. fungorum affected calcite dissolution by modifying pH and alkalinity during utilization of ionic N and C species. Uptake of NH4+ decreased pH and alkalinity, whereas utilization of lactate, a negatively charged organic anion, increased pH and alkalinity. Calcite in biotic glucose-bearing reactors dissolved by simultaneous reaction with H2CO3 generated by dissolution of atmospheric CO2 (H2CO3 + CaCO3 → Ca2+ + 2HCO3−) and H+ released during NH4+ uptake (H+ + CaCO3 → Ca2+ + HCO3−). Reaction with H2CO3 and H+ supplied ∼45% and 55% of the total Ca2+ and ∼60% and 40% of the total HCO3−, respectively. The net rate of microbial calcite dissolution in the presence of glucose and NH4+ was ∼2-fold higher than that observed for abiotic control experiments where calcite dissolved only by reaction with H2CO3. In lactate bearing reactors, most H+ generated by NH4+ uptake reacted with HCO3− produced by lactate oxidation to yield CO2 and H2O. Hence, calcite in biotic lactate-bearing reactors dissolved by reaction with H2CO3 at a net rate equivalent to that calculated for abiotic control experiments. This study suggests that conventional carbonate equilibria models can satisfactorily predict the bulk fluid chemistry resulting from microbe-calcite interactions, provided that the ionic forms and extent of utilization of N and C sources can be constrained. Because the solubility and dissolution rate of calcite inversely correlate with pH, heterotrophic microbial growth in the presence of nonionic organic matter and NH4+ appears to have the greatest potential for enhancing calcite weathering relative to abiotic conditions.  相似文献   

17.
The role of electrolyte ions in the dissolution of orthoclase (0 0 1) in 0.01 m NaOH (pOH ∼ 2) at 84 ± 1 °C is studied using a combination of in-situ X-ray reflectivity (XR) and ex-situ X-ray reflection interface microscopy (XRIM). The real-time XR measurements show characteristic intensity oscillations as a function of time indicative of the successive removal of individual layers. The dissolution rate in 0.01 m NaOH increases approximately linearly with increasing NaCl concentration up to 2 m NaCl. XRIM measurements of the lateral interfacial topography/structure were made for unreacted surfaces and those reacted in 0.01 m NaOH/1.0 m NaCl solution for 15, 30 and 58 min. The XRIM images reveal that the dissolution reaction leads to the formation of micron-scale regions that are characterized by intrinsically lower reflectivity than the unreacted regions, and appears to be nucleated at steps and defect sites. The reflectivity signal from these reacted regions in the presence of NaCl in solution is significantly lower than that calculated from an idealized layer-by-layer dissolution process, as observed previously in 0.1 m NaOH in the absence of added electrolyte. This difference suggests that dissolved NaCl results in a higher terrace reactivity leading to a more three-dimensional process, consistent with the real-time XR measurements. These observations demonstrate the feasibility of XRIM to gain new insights into processes that control interfacial reactivity, specifically the role of electrolytes in feldspar dissolution at alkaline conditions.  相似文献   

18.
The dissolution rate of illite, a common clay mineral in Australian soils, was studied in saline-acidic solutions under far from equilibrium conditions. The clay fraction of Na-saturated Silver Hill illite (K1.38Na0.05)(Al2.87Mg0.46Fe3+0.39Fe2+0.28Ti0.07)[Si7.02Al0.98]O20(OH)4 was used for this study. The dissolution rates were measured using flow-through reactors at 25 ± 1 °C, solution pH range of 1.0-4.25 (H2SO4) and at two ionic strengths (0.01 and 0.25 M) maintained using NaCl solution. Illite dissolution rates were calculated from the steady state release rates of Al and Si. The dissolution stoichiometry was determined from Al/Si, K/Si, Mg/Si and Fe/Si ratios. The release rates of cations were highly incongruent during the initial stage of experiments, with a preferential release of Al and K over Si in majority of the experiments. An Al/Si ratio >1 was observed at pH 2 and 3 while a ratio close to the stoichiometric composition was observed at pH 1 and 4 at the higher ionic strength. A relatively higher K+ release rate was observed at I = 0.25 in 2-4 pH range than at I = 0.01, possibly due to ion exchange reaction between Na+ from the solution and K+ from interlayer sites of illite. The steady state release rates of K, Fe and Mg were higher than Si over the entire pH range investigated in the study. From the point of view of the dominant structural cations (Si and Al), stoichiometric dissolution of illite occurred at pH 1-4 in the higher ionic strength experiments and at pH ?3 for the lower ionic strength experiments. The experiment at pH 4.25 and at the lower ionic strength exhibited lower RAl (dissolution rate calculated from steady state Al release) than RSi (dissolution rate calculated from steady state Si release), possibly due to the adsorption of dissolved Al as the output solutions were undersaturated with respect to gibbsite. The dissolution of illite appears to proceed with the removal of interlayer K followed by the dissolution of octahedral cations (Fe, Mg and Al), the dissolution of Si is the limiting step in the illite dissolution process. A dissolution rate law showing the dependence of illite dissolution rate on proton concentration in the acid-sulfate solutions was derived from the steady state dissolution rates and can be used in predicting the impact of illite dissolution in saline acid-sulfate environments. The fractional reaction orders of 0.32 (I = 0.25) and 0.36 (I = 0.01) obtained in the study for illite dissolution are similar to the values reported for smectite. The dissolution rate of illite is mainly controlled by solution pH and no effect of ionic strength was observed on the dissolution rates.  相似文献   

19.
Batch uptake experiments and X-ray element mapping and spectroscopic techniques were used to investigate As(V) (arsenate) uptake mechanisms by calcite, including adsorption and coprecipitation. Batch sorption experiments in calcite-equilibrated suspensions (pH 8.3; PCO2 = 10−3.5 atm) reveal rapid initial sorption to calcite, with sorption rate gradually decreasing with time as available sorption sites decrease. An As(V)-calcite sorption isotherm determined after 24 h equilibration exhibits Langmuir-like behavior up to As concentrations of 300 μM. Maximum distribution coefficient values (Kd), derived from a best fit to a Langmuir model, are ∼190 L kg−1.Calcite single crystals grown in the presence of As(V) show well-developed rhombohedral morphology with characteristic growth hillocks on surfaces at low As(V) concentrations (?5 μM), but habit modification is evident at As(V) concentrations ?30 μM in the form of macrostep development preferentially on the − vicinal surfaces of growth hillocks. Micro-X-ray fluorescence element mapping of surfaces shows preferential incorporation of As in the − vicinal faces relative to + vicinals. EXAFS fit results for both adsorption and coprecipitation samples confirm that As occurs in the 5+ oxidation state in tetrahedral coordination with oxygen, i.e., as arsenate. For adsorption samples, As(V) forms inner-sphere surface complexes via corner-sharing with Ca octahedra. As(V) coprecipitated with calcite substitutes in carbonate sites but with As off-centered, as indicated by two Ca shells, and with likely disruption of local structure. The results indicate that As(V) interacts strongly with the calcite surface, similar to often-cited analog phosphate, and uptake can occur via both adsorption and coprecipitation reactions. Therefore, calcite may be effective for partial removal of dissolved arsenate from aquatic and soil systems.  相似文献   

20.
Structural characterization of iron oxide-water interfaces provides insight into the mechanisms through which these minerals control contaminant fate and element cycling in soil, sedimentary, and groundwater systems. Ordering of interfacial water and structural relaxations at the hematite (1 1 0) surface have been investigated in situ using high-resolution specular X-ray reflectivity. These measurements demonstrate that relaxations are constrained to primarily the top ∼5 Å of the surface. Near-surface iron atoms do not relax substantially, although the uppermost layer displays an increased distribution width, while the undercoordinated oxygens on the surface uniformly relaxed outward. Two sites of adsorbed water and additional layering of water farther from the surface were observed. Water fully covers the (1 1 0) surface and appears to form a continuous network extending into bulk solution, with positional order decreasing to that of a disordered bulk fluid within 1 nm. The arrangement of water is similar to that on the hematite (0 1 2) surface, which has a similar surface topography, although these surfaces display different vibrational amplitudes or positional disorder of adsorbed water molecules and average spacings of near-surface layered water. Comparison between these surfaces suggests that interfacial water ordering on hematite is controlled primarily by surface structure and steric constraints and that highly ordered water is likely common to most hematite-water interfaces.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号