共查询到20条相似文献，搜索用时 578 毫秒
1.
E. Davesne K. Dideriksen B.C. Christiansen K.B. Ayala-Luis H.C.B. Hansen 《Geochimica et cosmochimica acta》2010,74(22):6451-6467
In a recent study, sulphate-bearing green rust (GRSO4) was shown to incorporate Na+ in its structure (NaFeII6FeIII3(OH)18(SO4)2(s); GRNa,SO4). The compound was synthesised by aerial oxidation of Fe(OH)2(s) in the presence of NaOH. This paper reports on its free energy of formation .Freshly synthesised GRNa,SO4 was titrated with 0.5 M H2SO4 in an inert atmosphere at 25 °C, producing dissolved Fe2+ and magnetite or goethite. Solution concentrations, PHREEQC and the MINTEQ database were used to calculate reaction constants for the reactions:
2.
Pyrite plays the central role in the environmental issue of acid rock drainage. Natural weathering of pyrite results in the release of sulphuric acid which can lead to further leaching of heavy and toxic metals from other associated minerals. Understanding how pyrite reacts in aqueous solution is critical to understanding the natural weathering processes undergone by this mineral. To this end an investigation of the effect of solution redox potential (Eh) and various anions on the rate of pyrite leaching under carefully controlled conditions has been undertaken.Leaching of pyrite has been shown to proceed significantly faster at solution Eh of 900 mV (SHE) than at 700 mV, at pH 1, for the leach media of HCl, H2SO4 and HClO4. The predominant effect of Eh suggests electrochemical control of pyrite leaching with similar mechanism(s) at Eh of 700 and 900 mV albeit with different kinetics. Leach rates at 700 mV were found to decrease according to HClO4 > HCl > H2SO4 while at 900 mV the leach rate order was HCl > HClO4 > H2SO4. Solution Fe3+ activity is found to continually increase during all leaches; however, this is not accompanied by an increase in leach rate.Synchrotron based photoemission electron microscopy (PEEM) measurements showed a localised distribution of adsorbed and oxidised surface species highlighting that pyrite oxidation and leaching is a highly site specific process mediated by adsorption of oxidants onto specific surface sites. It appears that rates may be controlled, in part, by the propensity of acidic anions to bind to the surface, which varies according to , thus reducing the reactive or effective surface area. However, anions may also be involved in specific reactions with surface leach products. Stoichiometric dissolution data (Fe/S ratio), XPS and XRD data indicate that the highest leach rates (in HCl media at 900 mV Eh) correlate with relatively lower surface S abundance. Furthermore, there are indications that solution Cl− assists oxidation especially at higher Eh through the prevention of surface S0 buildup at reactive surface sites. 相似文献
3.
4.
Andrei V. Sharygin Robert H. Wood Victor N. Balashov 《Geochimica et cosmochimica acta》2006,70(20):5169-5182
The electrical conductivities of aqueous solutions of Li2SO4 and K2SO4 have been measured at 523-673 K at 20-29 MPa in dilute solutions for molalities up to 2 × 10−2 mol kg−1. These conductivities have been fitted to the conductance equation of Turq, Blum, Bernard, and Kunz with a consensus mixing rule and mean spherical approximation activity coefficients. In the temperature interval 523-653 K, where the dielectric constant, ε, is greater than 14, the electrical conductance data can be fitted by a solution model which includes ion association to form , , and , where M is Li or K. The adjustable parameters of this model are the first and second dissociation constants of the M2SO4. For the 673 K and 300 kg m−3 state point where the Coulomb interactions are the strongest (dielectric constant, ε = 5), models with more extensive association give good fits to the data. In the case of the Li2SO4 model, including the multi-ion associate, , gave an extremely good fit to the conductance data. 相似文献
5.
Ammoniojarosite [(NH4,H3O)Fe3(OH)6(SO4)2], a poorly soluble basic ferric sulfate, was produced by microbiological oxidation of ferrous sulfate at pH 2.0-3.0 over a range of concentrations (5.4-805 mM) and temperatures (22-65 °C). Ammoniojarosites were also produced by chemical (abiotic) procedures in parallel thermal (36-95 °C) experiments. At 36 °C, schwertmannite [ideally Fe8O8(OH)6(SO4)] was the only solid product formed at <10 mM concentrations. Between 11.5 and 85.4 mM , a mixed product of ammoniojarosite and schwertmannite precipitated, as identified by X-ray diffraction. In excess of 165 mM , ammoniojarosite was the only solid phase produced. An increase in the incubation temperature using thermoacidophiles at 45 and 65 °C accelerated the formation of ammoniojarosite in culture solutions containing 165 mM . Both the biogenic and chemical ammoniojarosites were yellow (2Y-4Y in Munsell hue), low surface area (<1 m2/g), well crystalline materials with average co and ao unit cell parameters of 17.467 ± 0.048 Å and 7.330 ± 0.006 Å, respectively. Strong positive correlations were observed between unit cell axial ratios (co/ao) and increasing synthesis temperature in both biotic and abiotic systems. All samples were N deficient compared to stoichiometric ammoniojarosite, and both chemical and X-ray data indicated partial replacement of by H3O+ to form solid solutions with 0.14-0.24 mole H3O+ per formula unit. The morphology of the biogenic jarosites included aggregated discs, pseudo-cubic crystals and botryoidal particles, whereas the chemical specimens prepared at 36-95 °C were composed of irregular crystals with angular edges. Morphological information may thus be useful to evaluate environmental parameters and mode of formation. The data may also have application in predicting phase boundary conditions for Fe(III) precipitation in biogeochemical processes and treatment systems involving acid sulfate waters. 相似文献
6.
The formation constants of neodymium complexes in sulfate solutions have been determined spectrophotometrically at temperatures of 30-250 °C and a pressure of 100 bars. The dominant species in the solution are NdSO4+ and Nd(SO4)2−, with the latter complex being more important at higher temperature. Equilibrium constants were calculated for the following reactions:
7.
The stability of yttrium-acetate (Y-Ac) complexes in aqueous solution was determined potentiometrically at temperatures 25-175 °C (at Ps) and pressures 1-1000 bar (at 25 and 75 °C). Measurements were performed using glass H+-selective electrodes in potentiometric cells with a liquid junction. The species YAc2+ and were found to dominate yttrium aqueous speciation in experimental solutions at 25-100 °C (log [Ac−] < −1.5, pH < 5.2), whereas at 125, 150 and 175 °C introduction of into the Y-Ac speciation model was necessary. The overall stability constants βn were determined for the reaction
8.
9.
Synthesis, characterization and thermochemistry of a Pb-jarosite 总被引：1，自引：0，他引：1
F.L. Forray A.M.L. Smith A. Navrotsky K. Wright W.E. Dubbin 《Geochimica et cosmochimica acta》2010,74(1):215-224
The enthalpy of formation from the elements of a well-characterized synthetic Pb-jarosite sample corresponding to the chemical formula (H3O)0.74Pb0.13Fe2.92(SO4)2(OH)5.76(H2O)0.24 was measured by high temperature oxide melt solution calorimetry. This value ( = −3695.9 ± 9.7 kJ/mol) is the first direct measurement of the heat of formation for a lead-containing jarosite. Comparison to the thermochemical properties of hydronium jarosite and plumbojarosite end-members strongly suggests the existence of a negative enthalpy of mixing possibly related to the nonrandom distribution of Pb2+ ions within the jarosite structure. Based on these considerations, the following thermodynamic data are proposed as the recommended values for the enthalpy of formation from the elements of the ideal stoichiometric plumbojarosite Pb0.5Fe3(SO4)2(OH)6: = −3118.1 ± 4.6 kJ/mol, = −3603.6 ± 4.6 kJ/mol and S° = 376.6 ± 4.5 J/(mol K). These data should prove helpful for the calculation of phase diagrams of the Pb-Fe-SO4-H2O system and for estimating the solubility product of pure plumbojarosite. For illustration, the evolution of the estimated solubility product of ideal plumbojarosite as a function of temperature in the range 5-45 °C was computed (Log(Ksp) ranging from −24.3 to −26.2). An Eh-pH diagram is also presented. 相似文献
10.
Dionisis Katsikopoulos Ángeles Fernández-González Manuel Prieto 《Geochimica et cosmochimica acta》2009,73(20):6147-455
The enthalpy of mixing of the calcite-rhodochrosite (Ca,Mn)CO3 solid solution was determined at 25 °C from calorimetric measurements of the enthalpy of precipitation of solids with different compositions. A detailed study of the broadening of powder X-ray diffraction peaks shows that most of the precipitates are compositionally homogeneous. All the experimental enthalpy of mixing (ΔHm) values are positive and fit reasonably well (R2 = 0.86) to a Guggenheim function of three terms:
11.
12.
Emilie Pourtier Jean-Luc Devidal François Gibert 《Geochimica et cosmochimica acta》2010,74(6):1872-66
The solubility of synthetic NdPO4 monazite end-member was experimentally determined from 300 up to 800 °C, at 2000 bars in pure water, and in aqueous chloride or phosphate solutions. Both the classical weight-loss method and a new method based on isotope dilution coupled with thermal ionization mass spectrometer were used. In the range of temperature studied monazite showed a prograde solubility from 10−5.4 m at 300 °C up to 10−2.57 m at 800 °C. Experiments in H2O-H3PO4-NaCl-HCl solutions suggested Nd(OH)30 was the major species that was formed at high temperature and pressure. The equilibrium constants (log K) for the reaction:
13.
The speciation of cobalt (II) in Cl− and H2S-bearing solutions was investigated spectrophotometrically at temperatures of 200, 250, and 300 °C and a pressure of 100 bars, and by measuring the solubility of cobaltpentlandite at temperatures of 120-300 °C and variable pressures of H2S. From the results of these experiments, it is evident that CoHS+ and predominate in the solutions except at 150 °C, for which the dominant chloride complex is CoCl3−. The logarithms of the stability constant for CoHS+ show moderate variation with temperature, decreasing from 6.24 at 120 °C to 5.84 at 200 °C, and increasing to 6.52 at 300 °C. Formation constants for chloride species increase smoothly with temperature and at 300°C their logarithms reach 8.33 for , 6.44 for CoCl3−, 4.94 to 5.36 for , and 2.42 for CoCl+. Calculations based on the composition of a model hydrothermal fluid (Ksp-Mu-Qz, KCl = 0.25 m, NaCl = 0.75 m, ΣS = 0.3 m) suggest that at temperatures ?200 °C, cobalt occurs dominantly as CoHS+, whereas at higher temperatures the dominant species is . 相似文献
14.
Water diffusion in silicate melts is important for understanding bubble growth in magma, magma degassing and eruption dynamics of volcanos. Previous studies have made significant progress on water diffusion in silicate melts, especially rhyolitic melt. However, the pressure dependence of H2O diffusion is not constrained satisfactorily. We investigated H2O diffusion in rhyolitic melt at 0.95–1.9 GPa and 407–1629 °C, and 0.2–5.2 wt.% total water (H2Ot) content with the diffusion-couple method in a piston-cylinder apparatus. Compared to previous data at 0.1–500 MPa, H2O diffusivity is smaller at higher pressures, indicating a negative pressure effect. This pressure effect is more pronounced at low temperatures. Assuming H2O diffusion in rhyolitic melt is controlled by the mobility of molecular H2O (H2Om), the diffusivity of H2Om (DH2Om) at H2Ot ≤ 7.7 wt.%, 403–1629 °C, and ≤ 1.9 GPa is given by
DH2Om=D0exp(aX),