首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
本文以内蒙古西部英巴地区一个典型剖面为例,开展了详细的构造解析和年代学研究,初步构建这一地区晚古生代-中生代的构造岩浆事件框架。这一地区至少发育三期岩浆活动和三期构造变形事件。锆石U-Pb定年结果和前人的资料显示,三期岩浆活动分别为石炭纪（325~313 Ma）的花岗闪长岩和花岗岩、早二叠世（291~277 Ma）的钾长花岗岩和中细粒花岗岩及早白垩世（~134~130 Ma）的伟晶岩和石英二长岩。第一期构造变形事件为NW-SE向挤压,发生在早二叠世之后,使花岗闪长岩和钾长花岗岩发生挤压变形,形成主体低角度北西倾的片麻理,局部发育同期褶皱,变形温度为450~600℃;第二期为NW-SE向伸展,大致发生在早白垩世,使片麻状花岗闪长岩和片麻状钾长花岗岩发生中高温（450~650℃）的糜棱岩化作用,形成南东倾的低角度韧性剪切带,具有正断性质,后被伟晶岩脉切穿。第三期为NW-SE向伸展,发生在早白垩世之后,形成北西倾的中角度脆性正断层,断距2~10米,并使伟晶岩变形为碎裂岩。  相似文献   

2.
The Zargat Na’ am ring complex crops out 90 km NW of Shalatin City in the Southeastern Desert of Egypt. The ring complex forms a prominent ridge standing high above the surrounding mafic-ultramafic hills. It is cut by two sets of joints and faults which strike predominantly NNW-SSE and E-W, and is injected by dikes, porphyritic alkaline syenites, and felsite porphyries. It consists of alkali syenites, alkali quartz syenites, and peralkaline arfvedsonite-bearing granitic and pegmatitic dikes and sills. The complex is characterized locally by extreme enrichments in REEs, wolframite and rare, high field strength metals (HFSM), such as Zr and Nb. The highest concentrations (1.5 wt% Zr, 0.25 wt% Nb, 0.6 wt% Σ REEs) occur in aegirine-albite aplites that formed around arfvedsonite pegmatites. Quartzhosted melt inclusions in arfvedsonite granite and pegmatite provide unequivocal evidence that the peralkaline compositions and rare metal enrichments are primary magmatic features. Glass inclusions in quartz crystals also have high concentrations of incompatible trace elements including Nb (750 ￠ 10−6), Zr (2500 × 10−6) and REEs (1450 × 10−6). The REEs, Nb and Zr compositions of the aegirine-albite aplites plot along the same linear enrichment trends as the melt inclusions, and Y/Ho ratios mostly display unfractionated, near-chondritic values. The chemical and textural features of the aegirine-albite aplites are apparently resultant from rapid crystallization after volatile loss from a residual peralkaline granitic melt similar in composition to the melt inclusions.  相似文献   

3.
The Tres Arboles ductile fault zone in the Eastern Sierras Pampeanas, central Argentina, experienced multiple ductile deformation and faulting events that involved a variety of textural and reaction hardening and softening processes. Much of the fault zone is characterized by a (D2) ultramylonite, composed of fine‐grained biotite + plagioclase, that lacks a well‐defined preferred orientation. The D2 fabric consists of a strong network of intergrown and interlocking grains that show little textural evidence for dislocation or dissolution creep. These ultramylonites contain gneissic rock fragments and porphyroclasts of plagioclase, sillimanite and garnet inherited from the gneissic and migmatitic protolith (D1) of the hangingwall. The assemblage of garnet + sillimanite + biotite suggests that D1‐related fabrics developed under upper amphibolite facies conditions, and the persistence of biotite + garnet + sillimanite + plagioclase suggests that the ultramylonite of D2 developed under middle amphibolite facies conditions. Greenschist facies, mylonitic shear bands (D3) locally overprint D2 ultramylonites. Fine‐grained folia of muscovite + chlorite ± biotite truncate earlier biotite + plagioclase textures, and coarser‐grained muscovite partially replaces relic sillimanite grains. Anorthite content of shear band (D3) plagioclase is c. An30, distinct from D1 and D2 plagioclase (c. An35). The anorthite content of D3 plagioclase is consistent with a pervasive grain boundary fluid that facilitated partial replacement of plagioclase by muscovite. Biotite is partially replaced by muscovite and/or chlorite, particularly in areas of inferred high strain. Quartz precipitated in porphyroclast pressure shadows and ribbons that help define the mylonitic fabric. All D3 reactions require the introduction of H+ and/or H2O, indicating an open system, and typically result in a volume decrease. Syntectonic D3 muscovite + quartz + chlorite preferentially grew in an orientation favourable for strain localization, which produced a strong textural softening. Strain localization occurred only where reactions progressed with the infiltration of aqueous fluids, on a scale of hundreds of micrometre. Local fracturing and microseismicity may have induced reactivation of the fault zone and the initial introduction of fluids. However, the predominant greenschist facies deformation (D3) along discrete shear bands was primarily a consequence of the localization of replacement reactions in a partially open system.  相似文献   

4.
哈达门沟金矿床成岩成矿时代的定点定年研究   总被引：25，自引：3，他引：22  
哈达门沟大型钾长石 -石英脉型金矿床位于华北地台北缘西段的乌拉山地区。矿区西部的大桦背花岗岩和矿区内的伟晶岩脉与金矿化均具有较为密切的空间关系 ,这导致不少研究者认为哈达门沟金矿床与大桦背岩体或伟晶岩之间也具有时间和成因联系。通过采用先进的高灵敏的高分辨率的离子探针 (SHRIMP)对大桦背岩体、伟晶岩脉和钾长石化蚀变岩进行的锆石 U- Pb定点定年研究表明 :伟晶岩脉形成于 (1836± 5)× 10 6a,属吕梁旋回 ;大桦背岩体形成于 (353± 7)× 10 6a,应为海西旋回早期产物 ;金矿化年龄小于或等于 (132± 2 )× 10 6a,应为燕山晚期。这些年龄结果说明 ,本区金矿化比大桦背岩体晚至少 2 2 0× 10 6a,这排除了金矿化与大桦背岩体和伟晶岩脉之间有任何成因联系的可能性。蚀变岩的年龄还证明 ,虽然乌拉山和胶东地区金矿床的围岩和年龄不同 ,但两地区的金矿化却几乎同时发生。此外 ,大桦背岩体的形成年龄与华北地块和蒙古古陆块碰撞作用发生的时间基本一致 ,因此大桦背岩体的 SHRIMP年龄为这一碰撞作用提供了可靠的年代学证据。  相似文献   

5.
 The solubility of hydroxyl in coesite was investigated in multianvil experiments performed at 1200 °C over the nominal pressure range 5–10 GPa, at an f O2 close to the Ni-NiO buffer. The starting material for each experiment was a cylinder of pure silica glass plus talc, which dehydrates at high P and T to provide a source of water and hydrogen (plus enstatite and excess SiO2). Fourier-transform infrared (FTIR) spectra of the recovered coesite crystals show five sharp bands at 3606, 3573, 3523, 3459, and 3299 cm−1, indicative of structurally bonded hydrogen (hydroxyl). The concentration of hydrogen increases with pressure from 285 H/106 Si (at 5 GPa) to 1415 H/106 Si (at 10 GPa). Assuming a model of incorporation by (4H)Si defects, the data are fit well by the equation C OH=Af 2 H2<\INF>Oexp(−PΔV/RT), with A=4.38 H/106 Si/GPa, and ΔV=20.6 × 10−6 m3 mol−1. An alternative model entailing association of hydrogen with cation substitution can also be used to fit the data. These results show that the solubility of hydroxyl in coesite is approximately an order of magnitude lower than in olivines and pyroxenes, but comparable to that in pyropic garnet. However, FTIR investigations on a variety of ultrahigh pressure metamorphic rocks have failed in all cases to detect the presence of water or hydrogen in coesite, indicating either that it grew in dry environments or lost its hydrogen during partial transformation to quartz. On the other hand, micro-FTIR investigations of quartz crystals replacing coesite show that they contain varying amounts of H2O. These results support the hypothesis that preservation of coesite is not necessarily linked to fast exhumation rates but is crucially dependent on limited fluid infiltration during exhumation. Received: 23 August 1999 / Accepted: 10 April 2000  相似文献   

6.
The NE–striking Jiamusi–Yitong fault zone(JYFZ) is the most important branch in the northern segment of the Tancheng–Lujiang fault zone. The precise shearing time of its large–scale sinistral strike–slip has yet to determined and must be constrained. Detailed field investigations and comprehensive analyses show that strike–slip faults or ductile shear belts exist as origination structures along the western region of Yitong Graben. The strike of the shear belts trend to the NE–SW with steep mylonitic foliation. The zircon U–Pb dating result for the granite was 264.1±1 Ma in the ductile shear belt of the JYFZ. The microstructural observation(rotated feldspar porphyroclasts, S–C fabrics, and quartz c–axis fabrics, etc.) demonstrated the sinistral shearing of the ductile shear zones. Moreover, the recrystallized quartz types show a transitional stage of the subgrain rotation toward the recrystallization of the grain boundary migration(SR–GBM). Therefore, we suggest that the metamorphic grade of the shear zone in the ductile shear zones should have reached high greenschist facies conditions, and the deformation temperatures should approximately 450–500°C, which is obviously higher than the blocking temperature of muscovite(300–400°C). Hence, the ~(40)Ar/~(39)Ar isochron age of muscovite from ductile shear zones should be a cooling age(162.7±1 Ma). We infer that the sinistral strike–slipping event at the JYFZ occurred in the late Jurassic period, and it was further inferred from the ages of the main geological events in this region that the second sinistral strike–slip age of the Tancheng–Lujiang fault zone occurred during the period of tectonic movements in the Circum–Pacific tectonic domain. This discovery also indicates the age of the Tancheng–Lujiang fault zone that stretches to northeastern China. The initiation of the JYFZ in the late Jurassic is related to the speed and direction of oblique subduction of the west Pacific Plate under the Eurasian continent and is responsible for collision during the Jurassic period.  相似文献   

7.
喜马拉雅新生代淡色花岗岩带是近年来提出的与高度结晶分异、异地深成淡色花岗岩有关的稀有金属战略远景区,目前其金属组合以铍-铌-钽（-锡-钨）为主。秦克章等（2021a）报道了在高喜马拉雅带珠峰地区发现的琼嘉岗锂矿,是喜马拉雅首例具有工业价值的伟晶岩型锂矿。本次研究重点揭示喜马拉雅琼嘉岗伟晶岩型锂矿的成矿特征、形成时代和源区特征。琼嘉岗矿区矿石矿物主要为锂辉石、铌铁矿-铌锰矿、少量锡石和绿柱石,特征性长柱状锂辉石主要产于块体微斜长石+锂辉石带和分层细晶岩带内。琼嘉岗锂辉石伟晶岩各结构分带的K/Rb含量较为相似,锂含量从边部细粒钠长石带（~100×10-6）到分层细晶岩带（~1000×10-6）,再到块体微斜长石+锂辉石带（>3000×10-6）逐渐升高,而Cs含量逐渐降低。独居石和铌钽铁矿族矿物LA-ICPMS定年结果显示,琼嘉岗锂辉石伟晶岩形成于新喜马拉雅阶段早期（25~24Ma）,与高喜马拉雅地区淡色花岗岩时代相近。矿物化学和独居石Nd同位素结果显示该稀有金属伟晶岩结晶于高度演化的花岗伟晶岩熔体,源区特征与高喜马拉雅结晶岩系一致。本研究所揭示的琼嘉岗成矿特征、形成时代和源区特征将为高喜马拉雅其它地区找寻大型花岗伟晶岩型锂矿提供重要借鉴意义。  相似文献   

8.
The E-W running Salem-Attur shear zone demarcates the tectonic boundary between Archaean Dharwar Craton in the north and Proterozoic Southern granulite terrane in the south. This study reveals that the shear zone is a low angle thrust. The thrust zone is around 10 m thick and it merges with the main shear zone along the strike. The thrust is developed on charnockite near Odyarpatti, which is retrograded into schists. Further, it is marked by gently dipping mylonitic foliation and subhorizontal lineation. The S-C fabric, mantled porphyroclasts and intragranular faults indicate northeasterly slip along the thrust. Recumbent shear folds SF1 are developed within the thrust zone. The thrust has been folded by late stage F2 fold which has brought variation in the orientation of the mylonitic foliation from subhorizontal to vertical attitude; the mylonitic lineations have been rotated to subvertical orientation also. Additionally, the F2 crenulations and shear cleavages and intersection lineations are superimposed on the mylonitic fabric. Thrusting along the Salem-Attur shear zone is probably the cause for upliftment of the charnockites to the upper crust. Post-upliftment stage has witnessed brittle deformation in the form of development of shear fractures in NNE-SSW and E-W directions. Pseudotachylites are emplaced along these fractures.  相似文献   

9.
There is a large ductile shear zone, 2 km wide and more than 3SO km long, in the South Qilian Mountains, western China. It is composed of volcanic, granitic and calcareous mylonites. The microstructures of the ductile shear zone show nearly E-W extending subvertical foliation, horizontal and oblique stretching lineations, shearing sense from sinis-tral to oblique sinistral strike-slip from east to west, "A" type folds and abundant granitic veins. Measured lattice preferred orientations (LPOs) of the mylonitic and recrystallized quartz of the granitic mylonite in the west segment suggest a strong LPO characterized by the dominant slip systems {1010} formed at high temperature (>650℃). K-feldspar of the mylonite shows an 39Ar/40Ar high-temperature plateau age of 243.3±1.3 Ma, and biotite, 250.5±0.5 Ma, which represent the formation age of the ductile shear zone. The 39Ar/40Ar plateau ages of 169.7±0.3 Ma and 160.6±0.1 Ma and the 39Ar/40Ar isochron ages of 166.99±2.37 Ma and 160.6±0.1 Ma of biot  相似文献   

10.
可可托海3号脉伟晶岩型稀有金属矿床是阿尔泰造山带产出的规模最大的伟晶岩脉,其完美的同心环状结构分带举世闻名。云母和长石作为3号脉9个结构带的贯通性矿物,由外向内表现不同的结构和成分特征。其中,云母由白云母系列向锂云母系列演化,白云母呈黄-绿色中细粒→白色或绿色中粗粒-巨晶→白色或绿色书状集合体→白色或绿色中粗粒-巨晶,锂云母呈玫瑰紫中细粒鳞片状或楔状集合体,BSE图像下云母表现出成分分带及不平衡和交代结构;长石主要为钾长石和钠长石,及少量斜长石,钾长石主要呈块体产出,钠长石呈细粒→叶片状→薄片状产出。本次研究通过电子探针(EMPA)和激光剥蚀等离子质谱(LA-ICP-MS)获得3号脉各结构带云母和长石的主微量成分。3号脉云母具有高Li(249×10-6~35932×10-6)、Rb(1240×10-6~22825×10-6)、Cs(35.9×10-6~13980×10-6)、Ta(13.3×10-6~447×10-6)含量、低K/Rb值(4.23~59.4)和K/Cs值(6.53~2368),钾长石具有低K/Rb值(35.4~1865),且由外向内,随K/Rb值降低,云母的Li、Rb、Cs、F、Ta含量升高,表明3号脉是一个由外向内结晶的分异演化程度较高的伟晶岩脉。另外,连续相邻结构带中云母和长石的主微量成分呈振荡变化,该现象主要受熔体不混溶过程的控制,也受矿物结晶不平衡影响,而熔体不混溶过程也是控制3号脉结构分带的机制之一。外部带(I-IV带)和内部带(V-VIII带)的云母和碱性长石在成分(FeO、Li、Rb、Cs、F、Ta含量和K/Rb值及K/Cs值)和结构(不平衡和交代结构)上具有明显差异,内部带演化程度明显加大,流体组分比例升高,表明体系由以熔体为主的阶段(外部带)进入以熔流体为主相对不稳定的阶段(外部带)。结合野外观察的证据,促使体系在IV带和V带间发生突然转变而进入熔流体阶段的是一个泄压事件。  相似文献   

11.
Changes in high-volatile bituminous coal (Pennsylvanian) near contacts with two volcanic intrusions in Illinois were investigated with respect to optical properties, coal chemistry, and coal pore structure. Vitrinite reflectance (Ro) increases from 0.62% to 5.03% within a distance of 5.5 m from the larger dike, and from 0.63% to 3.71% within 3.3 m from the small dike. Elemental chemistry of the coal shows distinct reductions in hydrogen and nitrogen content close to the intrusions. No trend was observed for total sulfur content, but decreases in sulfate content towards the dikes indicate thermochemical sulfate reduction (TSR). Contact-metamorphism has a dramatic effect on coal porosity, and microporosity in particular. Around the large dike, the micropore volume, after a slight initial increase, progressively decreases from 0.0417 cm3/g in coal situated 4.7 m from the intrusive contact to 0.0126 cm3/g at the contact. Strongly decreasing mesopore and micropore volumes in the altered zone, together with frequent cleat and fracture filling by calcite, indicate deteriorating conditions for both coalbed gas sorption and gas transmissibility.  相似文献   

12.
磷灰石可以记录和保存岩浆和热液活动的信息。可可托海伟晶岩型稀有金属矿床磷灰石发育,为研究该矿床伟晶岩成岩成矿过程提供了优良的条件。已有对可可托海伟晶岩型稀有金属矿床磷灰石的研究集中在其稀土元素特征,较少讨论其对伟晶岩成岩成矿过程的制约。本文选取可可托海伟晶岩型稀有金属矿床富矿伟晶岩脉(3号脉)和相对贫矿伟晶岩脉(1号、2b号和3a号脉)中的磷灰石作为研究对象,进行磷灰石岩相学和地球化学研究。岩相学分析表明,磷灰石主要与钠长石、石英、白云母、锰铝榴石等伴生。EPMA分析显示,磷灰石F含量为3.67%～4.41%,Cl含量小于0.67%,较低的Cl含量表明伟晶岩熔体出溶的流体Cl含量较低;大部分磷灰石MnO含量为4.67%～8.71%,但2b号脉磷灰石MnO含量变化较大(1.23%～14.28%),这是由于2b号脉磷灰石具有分带结构,暗示其遭受后期热液作用,促使磷灰石溶解-再沉淀,导致MnO含量发生较大变化。LA-ICP-MS分析显示,贫矿伟晶岩脉磷灰石的稀土元素含量较低(180×10~(-6));相反,富矿伟晶岩脉磷灰石的稀土元素含量较高( 700×10~(-6)),并具有明显的四分组效应(TE_(1-3)平均值为1.7)。1号脉和3a号脉磷灰石均显示轻稀土元素富集,反映其形成过程中有含Cl热液的参与。3号脉磷灰石显示强烈Eu负异常和Ce正异常,而2b号脉磷灰石显示强烈Ce负异常和中等Eu负异常,这种Eu、Ce异常的差异可能与岩浆-热液阶段大量流体出溶密切相关。磷灰石的沉淀将导致热液中HF含量的降低,促使磷灰石周围铌钽矿结晶和Nb、Ta进入磷灰石中。可见,在伟晶岩形成过程中,磷灰石并非保持稳定,其分带结构和主微量成分变化记录了后期热液活动,暗示后期热液活动对伟晶岩的成矿具有重要作用。  相似文献   

13.
Numerous pegmatite dikes occur in the Sparrow pluton (muscovite-biotite granite) and in the adjacent cordierite-zone schist-hornfels of the Yellowknife Supergroup. Where pegmatite dikes cut granite, the adjacent granite is enriched in muscovite and apatite, and depleted in K-feldspar. Mass transfer calculations, based on rock, mineral, and modal analyses, indicate that H, P, and locally B, Ti, Fe, and Ca were added, and K, Sr, Ba, and locally Na were removed (hydrogen metasomatism). In one alteration zone (8 cm wide) the calculated change (in terms of mols/gram of unaltered granite) is, 600 K-feldspar+24 biotite+190 plagioclase +[770 H+36 P+3 Ti+13 Fe+13 Ca] 400 muscovite+1100 quartz +11 apatite+[240 Na+260 K]. Where pegmatite dikes cut schist-hornfels (biotite-plagioclase-quartz), the adjacent rock is, in places, enriched in tourmaline, apatite, and quartz, and depleted in biotite and plagioclase. These alteration zones are variable in width; most are less than 20 cm wide. Mass transfer calculations, based on rock, mineral, and modal analyses, indicate that B, P, Zn, and locally Ca, Fe, and Al were added, and that Na, K, Fe, Rb, Sr, Ba, and locally Mg and Si were removed (boron metasomatism). In one zone, 2 cm wide, the calculated reaction (in units of mols/gram of unaltered schist) is, 730 biotite+1530 plagioclase +[1080 B+600 H+430 P+360 Ca] 480 tourmaline+480 quartz+115 apatite +[3630 Si+870 Na+590 K+110 Fe]. Changes in the volume fraction of muscovite, K-feldspar, tourmaline, and biotite, relative to distance from pegmatite, are progressive, and in most alteration zones may be expressed by use of an error-function equation. Some tourmaline zones are more complex. Zone formation is considered in terms of a steady-state reaction model in which grainboundary diffusion is the transport mechanism.  相似文献   

14.
Hot collisional orogens are characterized by abundant syn-kinematic granitic magmatism that profoundly affects their tectono-thermal evolutions. Voluminous granitic magmas, emplaced between 360 and 270 Ma, played a visibly important role in the evolution of the Variscan Orogen. In the Limousin region (western Massif Central, France), syntectonic granite plutons are spatially associated with major strike–slip shear zones that merge to the northwest with the South Armorican Shear Zone. This region allowed us to assess the role of magmatism in a hot transpressional orogen. Microstructural data and U/Pb zircon and monazite ages from a mylonitic leucogranite indicate synkinematic emplacement in a dextral transpressional shear zone at 313 ± 4 Ma. Leucogranites are coeval with cordierite-bearing migmatitic gneisses and vertical lenses of leucosome in strike–slip shear zones. We interpret U/Pb monazite ages of 315 ± 4 Ma for the gneisses and 316 ± 2 Ma for the leucosomes as the minimum age of high-grade metamorphism and migmatization respectively. These data suggest a spatial and temporal relationship between transpression, crustal melting, rapid exhumation and magma ascent, and cooling of high-grade metamorphic rocks.Some granites emplaced in the strike–slip shear zone are bounded at their roof by low dip normal faults that strike N–S, perpendicular to the E–W trend of the belt. The abundant crustal magmatism provided a low-viscosity zone that enhanced Variscan orogenic collapse during continued transpression, inducing the development of normal faults in the transpression zone and thrust faults at the front of the collapsed orogen.  相似文献   

15.
通过对坦桑尼亚恩泽加绿岩带玛汀杰金成矿区的4个金矿（化）体的成矿背景和地质特征进行分析,初步了解该区金矿体地质特征及矿床成因。玛汀杰金矿为产自韧性剪切带的石英脉型金矿,赋矿层位为太古代尼安兹超群绿片岩,矿体由NW向和EW向两组构造控制,矿石类型包括石英脉型、蚀变岩型和构造角砾岩型。普遍发育黄铁绢英云化。矿石w（Au）=0.62×10-6~3.04×10-6,部分矿石w（Au）值大于100×10-6。玛汀杰地区金矿为典型的产自绿岩带韧性剪切带的石英脉型金矿,矿床成因为热液成因。  相似文献   

16.
Summary The northwest-striking Pfahl zone, Bavarian Forest, is a mylonitic shear zone that is associated with brittle-ductile deformation fabrics and a conspicuous hydrothermal quartz mineralization. Two granites from this shear zone yield U–Pb and Pb–Pb evaporation ages between 321–329 Ma and two granodiorites give concordant 238U–206Pb and 235U–207Pb ages of 325±3 Ma and 326±3 Ma, respectively. Zircon populations of the granitoids show sub-types clustering around S20, S10 (granite) and S22 to S24 (granodiorite) testifying different magma affinity. Compositional and isotopic characteristics indicate that the granites and granodiorites were coeval melts, but not differentiates of a single parent magma. The granodiorites were derived from a source with higher time-integrated 87Rb/86Sr and lower 147Sm/144Nd ratios than the granites. One granite body is transected by the shear zone but the main mass of the granite is largely undeformed. This finding suggests that granite intrusion predates the final stage of ductile deformation along the Pfahl shear zone.  相似文献   

17.
新疆若羌县阿尔金中段吐格曼地区是花岗伟晶岩型稀有金属成矿的有利地区,目前已发现吐格曼铍锂矿、吐格曼北锂铍矿和瓦石峡南锂铍矿,其中发育于吐格曼层状花岗岩中心的吐格曼铍锂矿和北部接触带的吐格曼北锂铍矿已达中型规模。本文总结了吐格曼地区稀有金属花岗伟晶岩的类型,报导了吐格曼铍锂矿和吐格曼北锂铍矿伟晶岩的特征与形成时代。并基于ASTER遥感岩体与伟晶岩光谱信息提取成果揭示花岗岩与花岗伟晶岩的分布,指出托巴片麻状二长花岗岩中段花岗伟晶岩区以及阿亚格黑云斜长花岗岩南接触带花岗伟晶岩群是稀有金属找矿靶区,指出吐格曼铍锂矿花岗伟晶岩形成于中奥陶世晚期(460Ma)南阿尔金洋闭合后阿中地块与柴达木地块碰撞过程的后碰撞阶段。  相似文献   

18.
Gold mineralization in the West Hoggar shear zone,Algeria   总被引：1，自引：0，他引：1  
The Amesmessa gold prospect is located along a vertical N-S-trending crustal-scale ductile shear zone; stretching lineations are subhorizontal. This major shear zone is a Late Pan African dextral strike-slip fault of the Pharusian Belt of the Tuareg Shield (Algeria). The Amesmessa shear zone is asymmetric: strong thermal and deformational gradients are present along its western border where biotitic ultramylonites are in contact with a rigid Archean complex (In Ouzzal block), whereas there is a progressive gradation, through mylonite then protomylonite, to the Proterozoic gneiss of the Eastern block which displays co-axial Pan African structures. The Amesmessa shear zone is characterized by the presence of a felsic dike complex emplaced during shearing, and forming the most important parent material for ultramylonites. Basic magmas and carbonatites also intruded within the shear zone. The gold-rich quartz veins are located within the ultramylonitic western part of the shear zone. These N-S-trending laminated quartz veins formed during the late increments of shearing (plastic/brittle transition), by repeated syntectonic hydraulic fracturing along zones of rheological contrast parallel to foliation. The ore mineral association (pyrite, galena, native gold, sphalerite) crystallized in the deformed quartz matrix along late shear planes. Undeformed E-W trending banded quartz veins are present in the mylonitic eastern part of the shear zone; their gold content is low and no native gold has been observed. A strong hydrothermal alteration resulted in the development (along the walls of the N-S gold-bearing quartz veins) of a 5-m-wide carbonate-sericite-albite-pyrite secondary mineral association which implies an important CO2 supply and moderate temperature conditions. There is no alteration halo around the E-W quartz veins. Ultramylonites, hydrothermally altered rocks and quartz veins display similar REE patterns characterized by strong LREE enrichments. Shear-related fluids could be likely parental fluids for the Amesmessa gold mineralization and the associated hydrothermal alteration. Hydrothermal fluids were drawn into dilation zones and filled opening fractures along the main planar discontinuity of the most deformed rocks. The supply of CO2 may come from a deep-seated source as suggested by the presence of carbonatite dikes in the shear zones and the existence of CO2-H2O-rich fluid inclusions in quartz. The location of the gold-bearing quartz veins in the western part of the shear zone can be explained by the presence of strong thermal and rheological gradients.  相似文献   

19.
Geometrical relations between quartz C-axis fabrics, textures, microstructures and macroscopic structural elements (foliation, lineation, folds…) in mylonitic shear zones suggest that the C-axis fabric mostly reflects the late-stage deformation history. Three examples of mylonitic thrust zones are presented: the Eastern Alps, where the direction of shearing inferred from the quartz fabric results from a late deformation oblique to the overall thrusting; the Caledonides nappes and the Himalayan Main Central Thrust zone, where, through a similar reasoning, the fabrics would also reflect late strain increments though the direction of shearing deduced from quartz fabric remains parallel to the overall thrusting direction. Hence, the sense of shear and the shear strain component deduced from the orientation of C-axis girdles relative to the finite strain ellipsoid axes are not simply related nor representative of the entire deformation history.  相似文献   

20.
The Plattengneis shear zone is a 250–600 m thick, flat lying, Cretaceous, eclogite facies, mylonitic shear zone, with north-over-south transport direction, that is exposed over almost 1000 km2 in the Koralpe region along the eastern margin of the Alps. Although the shear zone is one of the largest in the Alps, its role in the Eoalpine metamorphic evolution and the subsequent exhumation of the region, remain enigmatic and its large-scale geometry is not well understood. The outcrop pattern suggests that the shear zone is made up of a single sheet that is folded into a series of open syn- and antiforms with wavelengths of about 10 km. Eclogite bodies occur above, within and below the shear zone and there is no metamorphic grade change across the shear zone. In the south, the fold axes strike east–west and plunge shallowly to the east. In the north, the fold axes are oriented in north–south direction and form a dome shaped structure of the shear zone. Total shortening during this late stage warping event was of the order of 5%. Indirect evidence constrains this folding event to have occurred between 80 and 50 Ma and the fold geometry implies that the final exhumation in the Koralpe occurred somewhat later than further north. Interestingly, the shear zone appears to strike out of the topography in the south and dip into the topography in the north, so that north of the shear zone only hanging-wall rocks are exposed and south of it only foot-wall rocks. Possibilities for the geometric relationship of the Plattengneis shear zone with the surrounding south dipping detachments are discussed.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号