首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Model calculations show that the thermal history of a Moon which originated by fission from the proto-Earth is the same as that for the Moon as it is currently understood. In particular, a fissioned Moon currently has a small percent of partial melt or at least near solidus temperatures below depths of 800 km in accord with the seismic data which show that the deep interior of the Moon has a very lowQ. The models have moderate (20–50%) degrees of partial melting in the upper mantle (depths < 300 or 200 km) in the period between 3 to 4 × 109 years ago and, therefore, can account for the mare filling epoch. Finally the heat flow of the models is 18 ergs cm–2 s–1 which is close to the average of 19 ergs cm–2 s–1 derived from the Apollo heat flow experiments. These findings add further support for the fission origin of the Moon.  相似文献   

2.
Lunar near-terminator and high-resolution panoramic camera photographs were searched for flow fronts, the edges of flow units in mare areas. Data for twenty areas, including fifteen previously unmeasured areas, are summarized. Height measurements of flow scarps present on the Moon range from 1 to 96 m. More than half (57%) of all flow fronts measured are less than 15 m thick. These observations agree well with other photogeological and experimental observations of flow unit thicknesses on the Moon.  相似文献   

3.
An empirically derived lunar gravity field   总被引：1，自引：0，他引：1  
The heat-flow experiment is one of the Apollo Lunar Surface Experiment Package (ALSEP) instruments that was emplaced on the lunar surface on Apollo 15. This experiment is designed to make temperature and thermal property measurements in the lunar subsurface so as to determine the rate of heat loss from the lunar interior through the surface. About 45 days (1 1/2 lunations) of data has been analyzed in a preliminary way. This analysis indicates that the vertical heat flow through the regolith at one probe site is 3.3 × 10–6 W/cm2 (±15%). This value is approximately one-half the Earth's average heat flow. Further analysis of data over several lunations is required to demonstrate that this value is representative of the heat flow at the Hadley Rille site. The mean subsurface temperature at a depth of 1 m is approximately 252.4K at one probe site and 250.7K at the other. These temperatures are approximately 35K above the mean surface temperature and indicate that conductivity in the surficial layer of the Moon is highly temperature dependent. Between 1 and 1.5m, the rate of temperature increase as a function of depth is 1.75K/m (±2%) at the probe 1 site. In situ measurements indicate that the thermal conductivity of the regolith increases with depth. Thermal-conductivity values between 1.4 × 10–4 and 2.5 × 10–4 W/cm K were determined; these values are a factor of 7 to 10 greater than the values of the surface conductivity. If the observed heat flow at Hadley Base is representative of the moonwide rate of heat loss (an assumption which is not fully justified at this time), it would imply that overall radioactive heat production in the Moon is greater than in classes of meteorites that have formed the basis of Earth and Moon bulk composition models in the past.Lamont-Doherty Geological Observatory Contribution Number 1800.  相似文献   

4.
Reliable measurements of the Moon's global heat flow would serve as an important diagnostic test for models of lunar thermal evolution and would also help to constrain the Moon's bulk abundance of radioactive elements and its differentiation history. The two existing measurements of lunar heat flow are unlikely to be representative of the global heat flow. For these reasons, obtaining additional heat flow measurements has been recognized as a high priority lunar science objective. In making such measurements, it is essential that the design and deployment of the heat flow probe and of the parent spacecraft do not inadvertently modify the near-surface thermal structure of the lunar regolith and thus perturb the measured heat flow. One type of spacecraft-related perturbation is the shadow cast by the spacecraft and by thermal blankets on some instruments. The thermal effects of these shadows propagate by conduction both downward and outward from the spacecraft into the lunar regolith. Shadows cast by the spacecraft superstructure move over the surface with time and only perturb the regolith temperature in the upper 0.8 m. Permanent shadows, such as from thermal blankets covering a seismometer or other instruments, can modify the temperature to greater depth. Finite element simulations using measured values of the thermal diffusivity of lunar regolith show that the limiting factor for temperature perturbations is the need to measure the annual thermal wave for 2 or more years to measure the thermal diffusivity. The error induced by permanent spacecraft thermal shadows can be kept below 8% of the annual wave amplitude at 1 m depth if the heat flow probe is deployed at least 2.5 m away from any permanent spacecraft shadow. Deploying the heat flow probe 2 m from permanent shadows permits measuring the annual thermal wave for only one year and should be considered the science floor for a heat flow experiment on the Moon. One way to meet this separation requirement would be to deploy the heat flow and seismology experiments on opposite sides of the spacecraft. This result should be incorporated in the design of future lunar geophysics spacecraft experiments. Differences in the thermal environments of the Moon and Mars result in less restrictive separation requirements for heat flow experiments on Mars.  相似文献   

5.
The circular maria - Orientale, Imbrium, Serenitatis, Crisium, Smythii, and Tsiolkovsky -lie nearly on a lunar great circle. This pattern can be considered the result of a very close, non-capture encounter between Moon and Earth early in solar-system history. Of critical importance in analyzing the effects of such an encounter is the position of the weightlessness limit of the Earth-Moon System which is located at about 1.63R e, measured from the center of Earth to center of Moon. Within this weightlessness limit, material can be pulled from the lunar surface and interior by Earth's gravity and either escape from the Moon or be redistributed onto the lunar surface. In the case of an encounter with a non-spinning Moon, backfalling materials would be distributed along a lunar great circle. However, if the Moon is rotating during the encounter, the backfall pattern will deviate from the great circle, the amount depending on the rate and direction of spin. Such a close encounter model may be related to the pattern of circular maria if materials departing from the source region are visualized as spheroids of molten lunar upper mantle basalt. These spheroids, then, would impact onto the lunar surface to form a pattern of lava lakes. Radiometric dates from mare rocks are consistent with this model of mare formation if the older mare rock dates are considered to date the encounter and younger dates are considered to date subsequent volcanic eruptions on a structurally weakened Moon.  相似文献   

6.
This paper presents an updated stratigraphical and compositional study of the exposed maria within the Imbrium basin on the Moon. Clementine multispectral data were employed to derive TiO2 and FeO wt% abundance estimates of potentially distinct basaltic flows. Additionally, NASA Lunar Orbiter images were used to estimate flow ages using crater count statistics. Mare Imbrium shows evidence of a complex suite of low to high-Ti basaltic lava units infilling the basin over an 800 million year timescale. More than a third (37%) of identified mare basalts were found to contain 1-3 wt% TiO2. Two other major mare lithological units (representing about 25% of the surface each) show TiO2 values between 3-5 and 7-9 wt%. The dominant fraction (55%) of the sampled maria contain FeO between 16 and 18 wt%, followed by 27% of maria having 18-20 wt% and the remaining 18%, 14-16 wt% FeO. A crater frequency count (for diameters >500 m) shows that in three quarters of the sampled mare crater counts range between 3.5 and 5.5×10−2 per km2, which translates, according to a lunar cratering model chronology, into estimated emplacement ages between ∼3.3 and 2.5 Ga. A compositional convergence trend between the variations of iron and titanium oxides was identified, in particular for materials with TiO2 and FeO content broadly above 5 and 17 wt%, respectively, suggesting a related petrogenesis and evolution. According to these findings, three major periods of mare infill are exposed in the Imbrium basin; despite each period showing a range of basaltic compositions (classified according to their TiO2 content), it is apparent that, at least within these local geological settings, the igneous petrogenesis generally evolved through time towards more TiO2- and FeO-rich melts.  相似文献   

7.
An origin of the Moon by a Giant Impact is presently the most widely accepted theory of lunar origin. It is consistent with the major lunar observations: its exceptionally large size relative to the host planet, the high angular momentum of the Earth–Moon system, the extreme depletion of volatile elements, and the delayed accretion, quickly followed by the formation of a global crust and mantle.According to this theory, an impact on Earth of a Mars-sized body set the initial conditions for the formation and evolution of the Moon. The impact produced a protolunar cloud. Fast accretion of the Moon from the dense cloud ensured an effective transformation of gravitational energy into heat and widespread melting. A “Magma Ocean” of global dimensions formed, and upon cooling, an anorthositic crust and a mafic mantle were created by gravitational separation.Several 100 million years after lunar accretion, long-lived isotopes of K, U and Th had produced enough additional heat for inducing partial melting in the mantle; lava extruded into large basins and solidified as titanium-rich mare basalt. This delayed era of extrusive rock formation began about 3.9 Ga ago and may have lasted nearly 3 Ga.A relative crater count timescale was established and calibrated by radiometric dating (i.e., dating by use of radioactive decay) of rocks returned from six Apollo landing regions and three Luna landing spots. Fairly well calibrated are the periods ≈4 Ga to ≈3 Ga BP (before present) and ≈0.8 Ga BP to the present. Crater counting and orbital chemistry (derived from remote sensing in spectral domains ranging from γ- and x-rays to the infrared) have identified mare basalt surfaces in the Oceanus Procellarum that appear to be nearly as young as 1 Ga. Samples returned from this area are needed for narrowing the gap of 2 Ga in the calibrated timescale. The lunar timescale is not only used for reconstructing lunar evolution, but it serves also as a standard for chronologies of the terrestrial planets, including Mars and possibly early Earth.The Moon holds a historic record of Galactic cosmic-ray intensity, solar wind composition and fluxes and composition of solids of any size in the region of the terrestrial planets. Some of this record has been deciphered. Secular mixing of the Sun was constrained by determining 3He/4He of solar wind helium stored in lunar fines and ancient breccias. For checking the presumed constancy of the impact rate over the past ≈3.1 Ga, samples of the youngest mare basalts would be needed for determining their radiometric ages.Radiometric dating and stratigraphy has revealed that many of the large basins on the near side of the Moon were created by impacts about 4.1 to 3.8 Ga ago. The apparent clustering of ages called “Late Heavy Bombardment (LHB)” is thought to result from migration of planets several 100 million years after their accretion.The bombardment, unexpectedly late in solar system history, must have had a devastating effect on the atmosphere, hydrosphere and habitability on Earth during and following this epoch, but direct traces of this bombardment have been eradicated on our planet by plate tectonics. Indirect evidence about the course of bombardment during this epoch on Earth must therefore come from the lunar record, especially from additional data on the terminal phase of the LHB. For this purpose, documented samples are required for measuring precise radiometric ages of the Orientale Basin and the Nectaris and/or Fecunditatis Basins in order to compare these ages with the time of the earliest traces of life on Earth.A crater count chronology is presently being built up for planet Mars and its surface features. The chronology is based on the established lunar chronology whereby differences between the impact rates for Moon and Mars are derived from local fluxes and impact energies of projectiles. Direct calibration of the Martian chronology will have to come from radiometric ages and cosmic-ray exposure ages measured in samples returned from the planet.  相似文献   

8.
Abstract— New data for lunar meteorites and a synthesis of literature data have significant implications for the interpretation of global Th data and for the Moon's bulk composition. As presently calibrated (Prettyman et al. 2002), the Lunar Prospector gamma‐ray data imply that the average global surface Th = 1.58 μg/g. However, that calibration yields implausibly high concentrations for the three most Th‐poor documented sampling sites, it extrapolates to a nonzero Lunar Prospector Th, ?0.7 μg/g, at zero sample Th, and it results in a misfit toward too‐high Th when compared with the global regolith Th spectrum as constrained using mainly lunaite regolith breccias. Another problem is manifested by Th versus K systematics. Ground truth data plot consistently to the high‐Th/K side of the Prospector data trend, offset by a factor of 1.2. A new calibration is proposed that represents a compromise between the Th levels indicated by ground truth constraints and the Prettyman et al. (2002) calibration. Conservatively assuming that the Th versus K issue is mostly a K problem, the average global surface Th is estimated to be ?1.35 μg/g. The Moon's remarkable global asymmetry in KREEP abundance is even more pronounced than previously supposed. The surface Th concentration ratio between the hemisphere antipodal to the Procellarum basin and the hemisphere centered on Procellarum is reduced to 0.24 in the new calibration. This extreme disparity is most simply interpreted as a consequence of Procellarum's origin at a time when the Moon still contained at least a thin residual layer of a global magma ocean. Allowing for diminution of Th with depth, the extrapolated bulk crustal Th is ?0.73 μg/g. Further extrapolation to bulk Moon Th yields ?0.07 μg/g, which is nearly identical to the consensus estimate for Earth's primitive mantle. Assuming chondritic proportionality among refractory lithophile elements implies Al2O3 of approximately 3.8 wt%. The Moon's bulk mantle mg ratio is only weakly constrained by seismic and mare‐basaltic data. KREEP‐and mare‐free lunaite regolith samples, other thoroughly polymict lunar meteorites, and a few KREEP‐free Apollo highland samples manifest a remarkable anticorrelation on a plot of Al2O3 versus mg. This trend implies that an important component of the Moon is highly magnesian. The bulk Moon is inferred to have an Earth‐like oxide mg ratio of ?87–88 mol%. The close resemblance between the bulk Moon and Earth's primitive mantle extends to moderately volatile elements, most clearly Mn. Unless major proportions of Cr and V are sequestered into deep mantle spinel, remarkably Earth‐like depletions (versus chondrites) are also inferred for bulk Moon Cr and V.  相似文献   

9.
A.E. Ringwood 《Icarus》1976,28(3):325-349
Recent hypotheses of lunar evolution hold that the Moon was extensively or completely melted and differentiated about 4.6 b.y. ago, resulting in formation of the plagioclase-rich lunar highlands underlain by a great thickness of complementary ferromagnesian cumulates. Mare basalts are interpreted as being formed by subsequent remelting of these cumulates. These hypotheses are tested experimentally in the cases of several bulk compositions which have been proposed for the Moon—those of Taylor and Jakes, Ganapathy and Anders, Wänke and co-workers, and Anderson. An extensive experimental investigation of melting equilibria displayed by the Taylor-Jakes model at high pressures and temperatures is presented. This permits a quantitative evaluation of the manner in which a model Moon with this composition would crystallize and differentiate under conditions of (i) total melting throughout, and (ii) total melting only of an outer shell a few hundred kilometers thick. A detailed study is made of the capacity of the cumulates underlying the crust in these models to produce mare basalts by a second stage of partial melting. A wide range of experimentally based arguments is presented, showing that for both cases, partial melting of such cumulates would produce magmas with compositions quite unlike those of mare basalts. In order to minimize these difficulties, bulk lunar compositions containing substantially smaller abundances of involatile components (e.g. CaO, Al2O3, TiO2) relative to major components of intermediate volatility (e.g. MgO, SiO2, FeO) than are specified in the Taylor-Jakes model, appear to be required. Other bulk lunar composition models proposed by Ganapathy and Anders, Wänke and co-workers and Anderson, were similarly tested in the light of experimental data. All of these are far too rich in (Ca and Al) relative to (Mg + Si + Fe) to yield, after melting and differentiation, cumulates capable of being parental to mare basalts. Moreover these compositions, whdn melted and differentiated, appear incapable of matching the composition of the pyroxene component of the lunar highland crust.A brief discussion of the petrogenesis of mare basakts is presented. The most promising model is one in which only the outer few hundred kilometers of the Moon were melted and differentiated around 4.6 b.y. ago. Continued radioactive heating of the deep undifferentiated lunar interior provided a second generation of primitive magmas up to 1.5 b.y. after the early melting and differentiation. These primitive magmas participated in assimilative interactions with late-stage differentiates formed near the crust-mantle boundary during the 4.6 b.y. differentiation. These interactions might explain some trace element and isotopic characteristics of mare basalts. The model possesses some attractive characteristics relating to the thermal evolution of the Moon.  相似文献   

10.
Stephen J. Keihm 《Icarus》1984,60(3):568-589
A detailed model of the lunar regolith is analyzed to examine the feasibility of an orbital mapping of heat flow using microwave radiometers. For regolith thermal and electrical properties which are representative of Apollo findings, brightness temperature observations in the bandλ = 5–30 cm would be required for heat flow analysis. Spectral variations shortward of 5 cm are controlled primarily by the temperature dependencies of the thermal conductivity and electrical absorption within the diurnal-varying layer. For wavelengths longer than 30 cm, unwanted emission from high impedance subregolith layers can be significant and size limitations on spacecraft radiometers is a factor. Over the 5- to 30-cm band, lunation-averaged brightness temperature increases of 2–10°K are predicted for heat flow values representative of the Apollo measurements. The magnitude of this increase depends directly on the value of regolith microwave absorption. For absorption values consistent with Apollo laboratory measurements, a spectral increase of 5°K is predicted. This value is considered marginally sufficient for an orbital heat flow measurement. However, important non-heat flow effects must be accounted for. Spectral variations can occur due to surface topography and subsurface scattering. For nadir viewing, surface roughness effects are not expected to be significant and topographic effects are nearly constant with wavelength for λ > 5cm. Volume scattering due to subsurface rock fragments can cause emission darkening of 1–6°K. However, spectral variations will not be large unless the distribution of scatterer sizes is sharply skewed. For the Moon, the most serious spurious effect appears to be emissivity variations due to the near-surface density gradient. A brightness temperature decrease of 10°K is predicted from centimeter to decameter wavelengths. If the transition from porous surface fines to compacted regolith soil occurs rapidly (within the upper 3–5 cm), most of the emissivity decrease will occur in the 5- to 30-cm wavelength band. It is recommended that complementary radar measurements be utilized to augment constraints on regolith emissivity and scattering properties.  相似文献   

11.
The technique of X-ray fluorescence remote sensing plays a significant role in research related to the chemical compositions of the Moon. Here we describe the data analysis method for China's Chang'E-2 X-ray spectrometer in detail and present the preliminary results about the first global Mg/Si and Al/Si maps of the lunar surface. Our results show that the distributions of Mg/Si and Al/Si correlate well with terrains on the Moon. The higher Mg/Si ratio corresponds to the mare regions while the lower value corresponds to the highland terrains. The map of the Al/Si ratio shows a reversed distribution compared with the map of the Mg/Si ratio.  相似文献   

12.
There have been many models describing the evolution of our sister planet. As information from the intensive exploration by the Apollo program has accumulated, more constraints on these models have emerged. We specifically consider a hypothesis in which there is a present day asthenosphere, a heat flow between 24 and 32 ergs cm−2 s−1 and a crust which developed early in the Moon's history by melting of the outer 100 to 200 km. We have also introduced a constraint which keeps the deep interior below the Curie point of iron for the first 1 to 1.5 b.y. so that it is able to carry the memory of an early field which magnetized the cold interior. The magnetized mare basalts and breccias cooled in this field from above the Curie point of iron (≈800°C.) and acquired a thermoremanent magnetization. While fully recognizing that some of these constraints are subject to other interpretations, it is nevertheless instructive to consider the thermal history that follows from such a model. First, the initial temperature must be high enough to cause melting in the outer 100–200 km, while the interior temperature must be cool enough to be below the Curie point of iron. Second, the crust in this model cools off so rapidly that the mare basalts could not be developed as late as indicated in lunar history. Rather we propose that the mare basalts result from local remelting associated with giant impacts. Third, the Moon's deep interior must have warmed up enough to erase the memory of the ancient magnetic field from the deep interior and to develop the asthenosphere which has been detected seismically. Fourth, if this asthenosphere is real, the viscosity of the Moon as a function of temperature must be high enough to have prevented convective cooling until the temperature increased to a value near the solidus temperature. At this temperature, the Moon would then likely cool by convection in the solid state. It is, therefore, a consequence of this model that solid body convection tool place late in lunar history. This may well have contributed to the lunar center of figure and center of mass offset, to the low order terms in its gravity field and to, its disequilibrium moment of inertia differences.  相似文献   

13.
The lunar surface is bathed in a variety of impacting particles originating from the solar wind, solar flares, and galactic cosmic rays. These particles can become embedded in the regolith and/or produce a range of other molecules as they pass through the target material. The Moon therefore contains a record of the variability of the solar and galactic particle fluxes through time. To obtain useful temporal snapshots of these processes, discrete regolith units must be shielded from continued bombardment that would rewrite the record over time. One mechanism for achieving this preservation is the burial of a regolith deposit by a later lava flow. The archival value of such deposits sandwiched between lava layers is enhanced by the fact that both the under- and over-lying lava can be dated by radiometric techniques, thereby precisely defining the age of the regolith layer and the geologic record contained therein. The implanted volatile species would be vulnerable to outgassing by the heat of the over-lying flow, at temperatures exceeding 300-700 °C. However, the insulating properties of the finely particulate regolith would restrict significant heating to shallow depths. We have therefore modeled the heat transfer between lunar mare basalt lavas and the regolith in order to establish the range of depths below which implanted volatiles would be preserved. We find that the full suite of solar wind volatiles, consisting predominantly of H and He, would survive at depths of ∼13-290 cm (for 1-10 m thick lava flows, respectively). A substantial amount of CO, CO2, N2 and Xe would be preserved at depths as shallow as 3.7 cm beneath meter-thick flows. Given typical regolith accumulation rates during mare volcanism, the optimal localities for collecting viable solar wind samples would involve stacks of thin mare lava flows emplaced a few tens to a few hundred Ma apart, in order for sufficient regolith to develop between burial events. Obtaining useful archives of Solar System processes would therefore require extraction of regolith deposits buried at quite shallow depths beneath radiometrically-dated mare lava flows. These results provide a basis for possible lunar exploration activities.  相似文献   

14.
A comparison of the lunar frontside gravity field with topography indicates that low-density ( 2.9 g cm–3) types of rock form a surface layer or crust of variable thickness: 40-60 km beneath terrae; 20-40 km beneath non-mascon maria; 0-20 km beneath mascon maria. The observed offset between lunar centers of mass and figure is consistent with farside crustal thicknesses of 40-50 km, similar to frontside terra thicknesses.The Moon is asymmetric in crustal thickness, and also in the distribution of maria and gamma radioactivity. Early bombardment of the Moon by planetesimals, in both heliocentric and geocentric orbits, is examined as a possible cause of the asymmetries. The presence of a massive companion (Earth) causes a spin-orbit coupled Moon to be bombarded non-uniformly. The most pronounced local concentration of impacts would have occurred on the west limb of the Moon, when it orbited close to the Earth, if low-eccentricity heliocentric planetesimals were still abundant in the solar system at that time.A very intense bombardment of this type could have redistributed crustal material on the Moon, thinning the west limb crust appreciably. This would have caused a change in position of the principal axes of inertia, and a reorientation of the spin-orbit coupled Moon such that the thinnest portion of its crust turned toward one of the poles. Erupting lavas would have preferentially flooded such a thin-crusted, low-lying area. This would have caused another readjustment of principal moments, and a reorientation of the Moon such that the mare areas tipped toward the equator. The north-south and nearside-farside asymmetries of mare distribution on the present Moon can be understood in terms of such a history.Paper dedicated to Prof. Harold C. Urey on the occasion of his 80th birthday on 29 April 1973.  相似文献   

15.
Lunar meteorites provide important new samples of the Moon remote from regions visited by the Apollo and Luna sample return missions. Petrologic and geochemical analysis of these meteorites, combined with orbital remote sensing measurements, have enabled additional discoveries about the composition and age of the lunar surface on a global scale. However, the interpretation of these samples is limited by the fact that we do not know the source region of any individual lunar meteorite. Here, we investigate the link between meteorite and source region on the Moon using the Lunar Prospector gamma ray spectrometer remote sensing data set for the elements Fe, Ti, and Th. The approach has been validated using Apollo and Luna bulk regolith samples, and we have applied it to 48 meteorites excluding paired stones. Our approach is able broadly to differentiate the best compositional matches as potential regions of origin for the various classes of lunar meteorites. Basaltic and intermediate Fe regolith breccia meteorites are found to have the best constrained potential launch sites, with some impact breccias and pristine mare basalts also having reasonably well‐defined potential source regions. Launch areas for highland feldspathic meteorites are much less well constrained and the addition of another element, such as Mg, will probably be required to identify potential source regions for these.  相似文献   

16.
Abstract— A report is presented for a possible revised classification of lunar igneous rocks that still uses the division of Moon rocks into mare and highland types. It subdivides the mare rocks into basalts depending on TiO2 content and glasses depending on colour, and subdivides the highland rocks principally into KREEP basalts and into coarse‐grained igneous rocks comparable to and using terrestrial igneous rock terminology.  相似文献   

17.
The lunar maria reflect two to five times less Earth-based radar power than the highlands, the spectrally blue maria surfaces returning the lowest power levels. This effect of weakening signal return has been attributed to increased signal absorption related to the electrical and magnetic characteristics of the mineral ilmenite (FeTiO3). The surface of Mare Imbrium contains some of the most distinct red-blue colorimetric boundaries and depolarized 70 cm wavelength reflectivity variations on the near side of the Moon. The weakest levels of both 3.8 cm and 70 cm reflectivity within Imbrium are confined to regional mare surfaces of the blue spectral type that can be recognized as stratigraphically unique flow surfaces. Frequency distributions of the 70 cm polarized and depolarized radar return power for five mare surfaces within the basin indicate that signal absorption, and probably the ilmenite content, increases generally from the beginning of the Imbrian Period to the end of the Eratosthenian Period with slight reversal between the end of the Imbrian and beginning of the Eratosthenian. TiO2 calibrated radar reflectivity curves can be utilized for lunar maria geochemical mapping in the same manner as the TiO2 calibrated spectral reflectivity curves of Charetteet al. (1974). The long wavelength radar data may be a sensitive indicator of mare chemical variations as it is unaffected by the normal surface rock clutter that includes ray materials from large impact craters.  相似文献   

18.
Seismic data from the Apollo Passive Seismic Network stations are analyzed to determine the velocity structure and to infer the composition and physical properties of the lunar interior. Data from artificial impacts (S-IVB booster and LM ascent stage) cover a distance range of 70–1100 km. Travel times and amplitudes, as well as theoretical seismograms, are used to derive a velocity model for the outer 150 km of the Moon. TheP wave velocity model confirms our earlier report of a lunar crust in the eastern part of Oceanus Procellarum.The crust is about 60 km thick and may consist of two layers in the mare regions. Possible values for theP-wave velocity in the uppermost mantle are between 7.7 km s–1 and 9.0 km s–1. The 9 km s–1 velocity cannot extend below a depth of about 100 km and must decrease below this depth. The elastic properties of the deep interior as inferred from the seismograms of natural events (meteoroid impacts and moonquakes) occurring at great distance indicate that there is an increase in attenuation and a possible decrease of velocity at depths below about 1000 km. This verifies the high temperatures calculated for the deep lunar interior by thermal history models.Paper presented at the Lunar Science Institute Conference on Geophysical and Geochemical Exploration of the Moon and Planets, January 10–12, 1973.  相似文献   

19.
A new,earth-based radar technique for the measurement of lunar topography   总被引：2，自引：0，他引：2  
Radio interferometry is a new technique for the measurement of the surface topography of the Moon. Elevation data may be obtained directly without regard for unambiguously-identified features, for any lunar surface element that yields a recognizable radar echo.A program has been undertaken at the Haystack Observatory for the topographic mapping of the major part of the lunar Earthside hemisphere. Some results are presented for the Alphonsus-Arzachel region, showing evidence for a late lava flow of a viscosity and, hence, presumably a chemical composition, differing from that of near-by mare surfaces.  相似文献   

20.
Although researchers in the last decade have been primarily concerned with the exotic findings of the more distant planets and moons in our solar system, as given by the Voyager series, there is still much work to be done on our nearer neighbours, including the Moon. This paper summarizes some basic age dating of a portion of the lunar surface, namely the mare in the crater Tsiolkovsky on the lunar far side.Using the Apollo 15 panoramic camera photographs, the cumulative crater frequency (N km-2) relative to crater diameter (D) distribution has been obtained for the mare in the crater Tsiolkovsky. The diameter size range sampled was 0.07 km < D < 1 km. A total of 12 604 craters were counted and their average apparent diameters measured. There were 85 sample areas on the mare surface which were chosen at random, after exclusion of blanketed, volcanic or secondary cratered areas. It was found that a large proportion of the crater floor contains endogenic features, especially volcanic vents at approximately D = 0.3 km. An additional 7 areas of interest were also examined in detail for comparison with areas of purely primary impact craters. Evidence for up to 8 lava floodings can be detected from the size-frequency distributions although no visual data, e.g., flow lobes, can be seen on the mare surface.The total size-frequency distribution for all the areas is coincident with Neukum et al. (1975a and b) Calibration Distribution in the size range 0.25 km < D < 1 km which is at the smallest crater diameters that they obtained. Neukum et al. (1975a and b) give their distribution as a polynomial of 7th degree. However, in this present study a variation is indicated in the steepening of the curve for D < 0.1 km.The results also approximate (but only for D < 0.6 km) the distribution obtained by Shoemaker et al. (1970) in the range 100 m < D < 3 km where N ~ D -2.9. The best fit line reached for the data given here is N ~ D -2.682.Comparison of the distribution with plots for the maria at Apollo 11, 12, and 15 landing sites show that Tsiolkovsky mare is 3.51 ± 0.1 × 109 yr old. This agrees with other workers (see Gornitz, 1973) who place it between Mare Tranquillitatis (Apollo 11 radiometric dating: 3.5 to 3.9 aeons) and Oceanus Procellarum (Apollo 12: 3.5 to 3.4 aeons). There are no rock samples from Tsiolkovsky to given an absolute age.This places Tsiolkovsky mare within the weighted mean of the age range (1.0 to 4.3 × 109 yr old) of the maria on the Moon. From this it can be concluded that the processes producing the vast basalt outpourings seen on the Moon's face apply for the far side also and that there is a linking factor for the whole Moon.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号