共查询到20条相似文献，搜索用时 31 毫秒
1.
A. Viana Da Fonseca J. Carvalho C. Ferreira J. A. Santos F. Almeida E. Pereira J. Feliciano J. Grade A. Oliveira 《Geotechnical and Geological Engineering》2006,24(5):1307-1348
This paper summarizes the results of an experimental site investigation and characterization survey, on a residual (saprolitic)
soil from granite, in the framework of a research project led by the Faculty of Engineering of the University of Porto (FEUP).
This project aims at characterizing these unusual soils in the context of the development of an International Prediction Event
(Class A) on the behaviour of different types of piles. A very extensive site characterization campaign, including a large
variety of in-situ tests and field methods, has been held. These investigations comprised the application of several geophysical
borehole and surface methods, namely P- and S-wave seismic refraction, reflection, cross-hole (CH), down-hole (DH), electrical
resistivity imaging and ground probing radar (GPR), as well as mechanical tests, namely SPT, CPT and DMT, among others. The
site is geologically formed by an upper layer of heterogeneous residual granitic soil, overlaying rather weathered granite
contacting a gneissic migmatite. Direct and indirect results from some of the referred surveys were compared between them
and with some of the available geological and geotechnical information, namely those obtained from seismic, electrical and
GPR profiles, conducted adjacent to three boreholes in which undisturbed soil samples were collected previously to geophysical
data acquisition. In addition, a comprehensive laboratory testing program was carried out using the collected undisturbed
samples. A discussion of the obtained results is hereby presented, giving emphasis to the correlations encountered between
the different tests, specific of saprolitic soils with weak relic structures. 相似文献
2.
TJ-1模拟月壤承载特性的现场试验研究 总被引：1，自引：0，他引：1
采用TJ-1模拟月壤作为试验材料,通过静力触探、静载荷试验的对比分析,探讨适合月壤承载力计算的经验公式,以期为未来载人登月时宇航员和着陆器登陆可能涉及到有关月面承载能力的问题提供必要的参考。首先,使用近255 t TJ-1模拟月壤人工制备出13 m×12 m×1.2 m试验用地基,后在试验地基均匀布置6个静力触探测点和2个静载荷试验测点进行测试。针对太沙基承载力计算半经验公式以及规范和国内外学者提出的12个适合中密实砂土静力触探承载力计算的经验公式,对试验结果进行探讨。发现直接运用太沙基提出的半经验公式计算月壤承载力结果明显偏小,而由联合试验小组提出的经验公式 能够用来近似计算月壤地基承载力。计算结果表明,该经验公式在计算承载力时能够与静载荷试验值较好的吻合。 相似文献
3.
Numerous methods have been proposed to assess the axial capacity of pile foundations. Most of the methods have limitations
and therefore cannot provide consistent and accurate evaluation of pile capacity. However, in many situations, the methods
that correlate cone penetration test (CPT) data and pile capacity have shown to provide better results, because the CPT results
provide more reliable soil properties. In an attempt to obtain more accurate correlation of CPT data with axial pile capacity,
gene expression programming (GEP) technique is used in this study. The GEP is a relatively new artificial intelligent computational
technique that has been recently used with success in the field of engineering. Three GEP models have been developed, one
for bored piles and two other models for driven piles (a model for each of concrete and steel piles). The data used for developing
the GEP models are collected from the literature and comprise a total of 50 bored pile load tests and 58 driven pile load
tests (28 concrete pile load tests and 30 steel pile load tests) as well as CPT data. For each GEP model, the data are divided
into a training set for model calibration and an independent validation set for model verification. The performances of the
GEP models are evaluated by comparing their results with experimental data and the robustness of each model is investigated
via sensitivity analyses. The performances of the GEP models are evaluated further by comparing their results with the results
of number of currently used CPT-based methods. Statistical analyses are used for the comparison. The results indicate that
the GEP models are robust and perform well. 相似文献
4.
The soils of the Ionian coastal zone, except those in proximity to Taranto where overconsolidated clays outcrop, are not currently well known from the perspective of their physical characteristics and mechanical behaviour. This note report a series of data from laboratory and on site tests (SPT and CPT) that have made it possible to undertake interesting quantitative comparisons as well as verifying some correlations proposed in the literature. The results show how to deal with, at least for more obviously sandy soils, medium and/or high density sands, to which can be attributed friction angles even of the order of 40° and greater, while the soils nearer the surface show notable variability related to the presence of soils with finer grain size distribution. 相似文献
5.
上海地区土体抗剪强度与静力触探比贯入阻力相关关系研究 总被引：2，自引：0，他引：2
基于上海地区19个工程共201组数据,通过黏土、粉质黏土和粉砂在上海地区土层中的分布,比贯入阻力Ps,室内固结快剪试验黏聚力cu和摩擦角?u,孔隙比e,塑性指数Ip沿土层深度的变化,分析得到3种土类的抗剪强度与比贯入阻力的相关关系,并总结了国内软土地区土体抗剪强度与静力触探比贯入阻力之间的相关关系。本文得到黏土的相关关系与以往的经验公式相近,同时给出了原位土层粉质黏土和粉砂的相关关系。区别不同土类使得相关关系可用性提高,在工程应用中更加合理。根据本文相关关系,通过静力触探比贯入阻力可以得到不同土层的抗剪强度值,进而应用于基坑稳定计算。本文研究的结果可以应用于海相沉积土的勘察和工程设计工作。 相似文献
6.
Yahia E.-A. Mohamedzein Mohammed H. Aboud 《Geotechnical and Geological Engineering》2006,24(5):1385-1401
A detailed study was performed to investigate the compressibility and the shear strength of a residual soil in Omdurman, Sudan.
The soil resulted from weathering of sandstone and mudstone. The soil is classified as sandy clayey silt (MH-CH) and is generally
partially saturated. Consolidation tests were performed to study the compressibility of the soil and UU, CIU and insitu tests
(CPT and SPT) were performed to study the shear strength characteristics of the soil. The characteristics of this residual
soil can generally be predicted using correlations proposed in the literature for transported soils. The soil is of low to
medium compressibility and exhibits slight apparent overconsolidation behavior. The soil dilates during shear and shows no
long term effective cohesion. Problems associated with open cuts in this soil are attributed to loss of strength upon saturation. 相似文献
7.
The support vector machine (SVM) is a relatively new artificial intelligence technique which is increasingly being applied to geotechnical problems and is yielding encouraging results. In this paper SVM models are developed for predicting the ultimate axial load-carrying capacity of piles based on cone penetration test (CPT) data. A data set of 108 samples is used to develop the SVM models. These data were obtained from the literature containing pile load tests and each sample contains information regarding pile geometry, full-scale static pile load tests and CPT results. Moreover, a sensitivity analysis is carried out to examine the relative significance of each input variable with respect to ultimate strength prediction. Finally, a statistical analysis is conducted to make comparisons between predictions obtained from the SVM models and three traditional CPT-based methods for determining pile capacity. The comparison confirms that the SVM models developed in this paper outperform the traditional methods. 相似文献
8.
Piles are structural members made of steel, concrete, or wood installed into the ground to transfer superstructure loads to the soil. Nowadays, many structures are built on poor lands, and therefore piles have crucial roles in such structures. Performing in-situ tests such as cone penetration (CPT) and piezocone penetration tests (CPTu) have always been of great importance in designing piles. These tests have a brilliant consistency with reality, and as a result, the outcome data can be used in order to achieve reliable pile designing models and reduce uncertainty in this regard. In this paper, the capability of various CPT and CPTu based methods developed from 1961 to 2016 has been investigated using four statistical methods. Such CPT and CPTu based methods are adopted for direct prediction of axial bearing capacity of piles using CPT and CPTu field data. For this purpose, 61 sets of field data prepared from CPT and CPTu have been collected. The data sets were utilized in order to calculate the axial bearing capacity of piles (QE) through 25 different methods. In addition, the measured axial pile capacities (QM) have been collected, recorded and prepared from field static load tests, respectively. Then, four different statistical approaches have been applied to assess the accuracy of these methods. Finally, the most reliable and accurate methods are presented.
相似文献9.
《地学前缘(英文版)》2024,15(1):101688
Utilizing both borehole and Cone Penetration Testing (CPT) data in soil stratification helps to get more convincing soil stratification results. However, the soil classification results revealed by borehole (Unified Soil Classification System, USCS) and CPT tests (soil behavior type, SBT) are commonly not consistent. This study proposes a feasible solution to integrate the borehole and CPT data with the tree-based method. The tree-based method is naturally suitable for soil stratification tasks as it aims to divide the subsurface space into several clusters based on the similarities of the soil types. A novel boundary dictionary method is proposed to enhance the model performance on complex soil layer conditions. A probabilistic mapping matrix between the USCS-SBT system is built based on a collected municipal database with collocated borehole and CPT data. The optimal soil stratification results can be selected based on considering multiple borehole information and pruning the structure of trees. The structure of the trees can be optimized in a back analysis perspective with the Sequential Model-Based Global Optimization (SMBO) algorithm which aims to maximize the possibility of observing the borehole information based on the USCS-SBT probabilistic mapping matrix. The uncertainties of the optimal soil stratification results can be estimated based on a weighted Gini index method. The performance of the proposed method is validated based on a real case in New Zealand with a cross-validation method. The results indicate that the proposed method is robust and effective. 相似文献
10.
近年来,随着全球海洋开发战略的逐步开展,越来越多的工程建设和试验研究将在海洋中进行,为了掌握海底的土体环境,静力触探（CPT）技术在国内外海洋工程领域中的运用变得更加重要。本文根据国内外大量文献中相关海洋原位测试技术的报道,对海洋静力触探的国内外发展历程进行总结,重点阐述和研究了一种适用于海底淤泥质土的球型全流触探仪。分析结果表明,球型全流触探仪在海洋岩土工程勘察中具有很好的应用前景,且集测量数据精确可靠、试验方法多样化、理论解析丰富全面等优点于一身;利用球型全流触探仪能够有效避免较大的实测数据修正,贯入机理清晰严谨,开展循环贯入试验可以评价土的重塑特性,变速率贯入试验在评价应变速率和现场土体强度以及测试中土体固结状态之间的关系上具有优势;结合现场试验,对比分析传统CPT和球型全流触探仪的试验结果,并考虑海底软土的性质,摸索出一种可停靠球型探头新形式。 相似文献
11.
Acta Geotechnica - Obtaining in situ thermal properties of soils is often difficult and time-consuming. Here, cone penetration test (CPT) correlations are proposed and validated for thermal... 相似文献
12.
The study is concerned with the influence of various factors on vibro compaction in calcareous soils, This include effect
of carbonate content, and influence of pore water pressures in sand, settlements during vibrocompaction, vibroaccelerations
during sand column installation compared to earthquake accelerations and finally the liquefaction design based on average
CPT parameters. Previous experiences with calcareous sands and literature review confirm the necessity to apply a correlation
factor for calcareous material to the raw cone penetration resistance CPT values obtained in the field. Because of the very
fragile grains of the Dubai calcareous sands the penetration resistance will be influenced by crushing and grinding. To accommodate
for effect of calcareous sands on measured CPT values, a best fit correlations formula called here “correlation factor” is
developed. A parametric dynamic triaxial liquefaction testing programme has been executed on representative samples with loose
and dense zones. Representative testing parameters for field conditions and earthquake design accelerations have been applied
indicating that ground improvement is necessary. It was observed during the dynamic triaxial tests that the whole soil mass
consisting of dense columns and looser zones in between behaves jointly, and therefore compaction control using an average-CPT
approach is possible. 相似文献
13.
双桥静力触探法判别上海薄夹层粘土地基液化研究 总被引：2，自引：0，他引：2
通过对11项典型工程场地进行原位取土及双桥静力触探原位测试分析,重点研究了上海地区薄层粘性土（或粘质粉土）夹层对液化判别的影响,统计分析了锥尖阻力qc、摩阻比Rf与土层粘粒含量的相关关系,提出了完全依据双桥静力触探试验的地基液化判别方法,在工程应用中取得了显著经济效益。 相似文献
14.
The paper describes the performance of a 5.3-m trial embankment constructed on approximately 45 m of hydraulically placed pulverised fuel ash (pfa). It is planned to redevelop the 17-ha lagoon containing the pfa as a landfill. There is little variation in the particle size distribution of the uniformly graded silt sized pfa over the lagoon. However, the density of the pfa varies with depth with loose material underlying a denser surface layer, in a pattern that probably results from the water level in the lagoon during pfa deposition.
Settlement under the trial embankment was apparently largely complete by the end of the construction period (17 days), with approximately 300 mm of settlement under the crest of the embankment. The embankment settlement is significantly affected by compression of the loose layers within the deposit. Analysis of the problem using the conventional one-dimensional settlement method, and an mv profile determined by CPT calibrated against laboratory tests gave a reasonable prediction of the embankment crest settlement. 相似文献
15.
Wen-Jong Chang Sheng-Huoo Ni An-Bin Huang Yan-Hong Huang Yu-Zhang Yang 《Engineering Geology》2011,(3):235
Geotechnical reconnaissance of a recurrent liquefaction site at a Quaternary alluvial deposit in southern Taiwan was conducted to establish a comprehensive case history for liquefaction on silty fine sand with high fines content. The liquefaction occurred at a silty fine sand layer with D50 = 0.09 mm and fines content greater than 35% and was triggered by a Mw = 6.4 earthquake on March 4, 2010, which induced maximum horizontal acceleration up to 0.189 g at the site. In situ subsurface characterizations, including standard penetration test, cone penetration test, and shear wave velocity measurement, were performed as well as cyclic simple shear tests on undisturbed specimens retrieved by a modified hydraulic piston sampler. Comparisons of cyclic resistance ratios (CRRs) indicate that CPT sounding with standard penetration rate could overestimate the resistance ratio and drainage conditions during penetration should be considered for high fines content soil in the liquefaction analysis. Additionally, variations of CRRs from different in situ tests indicate that correlations among in situ tests and CRR could be soil specific and precautions should be taken when using these curves on silty fine sands. 相似文献
16.
《Geomechanics and Geoengineering》2013,8(2):137-146
This paper describes a numerical model developed to simulate the wave propagation in an elastic media that is applied to in situ dynamic penetration test devices currently used for site characterization. In the model, dynamic equilibrium equations are solved by finite difference analysis in the time domain to produce the discretization of a penetration system – including hammer, rod, penetrometer (or sampler) and soil. In standard penetration tests numerical simulations are shown to agree well with energy measurements derived from force and acceleration signals produced by the impact of a hammer. A parametric study allowed the identification of the relevant factors affecting penetration by demonstrating that the energy effectively delivered to the soil is a function of hammer height of fall and weight of both hammer and rods, as well as the permanent penetration of the penetrometer into the ground produced by a single stroke. Based on these evidences, an approach is suggested to compare results from different dynamic penetration tests without the need to rely on empirical correlations, which is achieved by demonstrating that different equipments should yield the same normalized energy once the influence of both the hammer and rod potential energies are properly considered. 相似文献
17.
The concrete-cored deep cement mixing (DCM) pile is a new kind of composite pile created by inserting precast core pile into the DCM column socket and has only been used in a few projects to date. The bearing mechanism of concrete-cored DCM pile composite foundation has not been investigated systematically. In this paper, plate load tests (PLT) on single pile composite foundation were conducted in Nanjing–Changzhou expressway, Xinhua district in Jiangyin city and Nanjing surrounding (NS) expressway. Following the results of the PLT, a comparison of ultimate bearing capacity between composite foundation reinforced by concrete-cored DCM pile and DCM column was made. During the PLT process, the vertical stress of surrounding soil and DCM column socket was measured using pressure cells. The vertical stress of precast core pile was obtained using steel stress gauge welded onto the reinforcement. Based on the vertical stress of surrounding soil, DCM column socket and precast core pile, the skin friction and load sharing ratio were obtained. The variation in surrounding soil properties depending on the installation of concrete-cored DCM pile was also analyzed using the results from cone penetration tests (CPT) taken in NS expressway. With the analysis of results for stress tests and CPT, the bearing mechanisms of composite foundation reinforced by concrete-cored DCM pile are obtained. 相似文献
18.
A three-dimensional discrete element model is used to investigate the effect of grain crushing on the tip resistance measured by cone penetration tests (CPT) in calibration chambers. To do that a discrete analogue of pumice sand, a very crushable microporous granular material, is created. The particles of the discrete model are endowed with size-dependent internal porosity and crushing resistance. A simplified Hertz–Mindlin elasto-frictional model is used for contact interaction. The model has 6 material parameters that are calibrated using one oedometer test and analogies with similar geomaterials. The calibration is validated reproducing other element tests. To fill a calibration chamber capable of containing a realistic sized CPT the discrete analogue is up-scaled by a factor of 25. CPT is then performed at two different densities and three different confinement pressures. Cone tip resistance in the crushable material is practically insensitive to initial density, as had been observed in previous physical experiments. The same CPT series is repeated but now particle crushing is disabled. The ratios of cone tip resistance between the two types of simulation are in good agreement with previous experimental comparisons of hard and crushable soils. Microscale exploration of the models indicates that crushing disrupts the buttressing effect of chamber walls on the cone. 相似文献
19.
20.
上海地区扁铲侧胀试验与其他原位试验结果的相关性分析 总被引：2，自引：0，他引：2
由于扁铲侧胀试验（DMT）在国内应用时间不长,如何合理地解释和应用DMT试验成果尚待进一步探讨。与其他原位试验结果进行对比分析是研究方法之一。介绍了多元回归在岩土工程相关分析中的应用。根据上海地区多个工程的扁铲侧胀试验、十字板剪切试验、标贯试验和静力触探试验的数据,通过选元分析和多元回归,得出扁铲侧胀试验与其它原位试验的相关关系,可供勘察设计相关人员参考使用。 相似文献