共查询到17条相似文献,搜索用时 968 毫秒
1.
2.
随着地形高差增大、地貌单元多变、近地表模型复杂,目前被广泛应用的初至折射静校正的精度已无法满足精细勘探的要求。初至层析静校正技术,由给定的初始模型进行正演,用射线追踪方法得到初始模型的初至波,利用该初至波和实际拾取的初至波进行比较,计算地表模型的修正量,反复迭代求得准确的地表模型。山西省国阳新能股份有限公司二矿390水平九采扩区地表标高940~1100m,地貌单元复杂,在对该区资料处理时,利用初至层析折射静校正,经9次迭代计算后,真实地刻划出近地表模型。在二种静校正技术对比中,初至折射静校正不但近地表模型精度低于层析折射静校正,而且其叠加剖面精细程度也远低于层析静校正,如在初至折射静校正叠加剖面同相轴上呈现的凹凸形态,在层析静校正叠加剖面并无显示,且后者剖面的信噪比也比前者明显提高。 相似文献
3.
本文提出了一种适用于浅层地质构造特征的倾斜层状介质模型,并建立了与其相应的虚拟射线模型,由此导出了一套反演递推公式。讨论了有关的参数求取,并实现了对倾斜展状折射界面均能普遍适应的折射波共始点或共折射点反演成像。 相似文献
4.
本文提出了一种适合于浅层地质构造特征的地质模型,并建立了与其相对应的虚拟介质模型,由此导出了一套反演递推公式,实现了当目的折射界面为倾斜界面,而其上覆地层倾角较小时的折射波共始点或共折射点反演成像。 相似文献
5.
6.
折射静校正技术在宣东地震资料处理中的应用 总被引:1,自引:0,他引:1
当地震数据中存在较大的静校正量时,利用模型道与各道互相关求取时差的反射波静校正方法往往不能奏效,其主要原因是得不到好的模型道,当原始资料的信噪比很低时,这一问题更加突出,因此必须首先解决好野外一次静校正。近年来,针对复杂地形和地表结构的折射波静校正,总差分折射静校正方法和基于速度模型的反演静校正方法被广泛应用。在静校正问题严重的宣东地区为例,综合运用了这两种折射静校正方法进行三维地震资料的处理,取得良好效果。 相似文献
7.
《物探化探计算技术》2016,(5)
折射静校正和层析静校正是利用初至时间反演近地表速度模型,解决复杂山地地区的低频静校正问题,由于受偏移距范围、迭代次数和反演精度等因素的影响,由反演模型求解的静校正量残留高频静校正量,影响地震资料的成像质量。针对这个问题,这里提出了基于初至残差的最小二乘法高频静校正技术。假设初至残差就是炮点和检波点高频静校正量,通过最小二乘法构建方程,采用矩阵迭代法求解即可获得炮点和检波点高频静校正量。实际资料的应用结果表明,该方法原理可行、计算稳定快速,可以在折射法或层析法静校正的基础上显著改善地震资料的成像质量。 相似文献
8.
9.
10.
本文提出了一种推断近地表构造的首波旅行时间反演的新方法.沿折射线相遇段所计算的旅行时间被用来重建地下第一个折射层的形状以及得出沿该界面的折射速度变化.所得信息可作为进一步处理的基础,比如说,用来进行近地表的静校正的计算.该方法优点之一在于确定折射界面的形状与确定折射界面速度互不相关,该方法可绘制多次覆盖时折射界面的几何形状或速度的急剧横向变化图.本文还给出了该反演技术的两个实例.其一利用了合成数据集;另一个利用了在沉积充填的深地堑上方爆破而得到的野外资料.利用合成数据集得到的结果对该方法予以证实并验证了误差分析的结论,其中,利用炮点左侧和右边接收记录来确定的折射界面速度误差符号相反,因此,真正的折射速度应位于这两个估值之间.一组野外数据反演得到的折射图象与常速反射迭加非常吻合,并说明了射线反演方法可处理折射速度或折射界面形状的剧烈的横向变化. 相似文献
11.
Derecke Palmer 《中国地质大学学报(英文版)》2009,20(3)
The 1D τ-p inversion algorithm is widely employed to generate starting models with most computer programs that implement refraction tomography. However, this algorithm emphasizes the vertical resolution of many layers, and as a result, it frequently fails to detect even large lateral variations in seismic velocities, such as the decreases that are indicative of shear zones. This study presents a case that demonstrates the failure of the 1D τ-p inversion algorithm to define or even detect a major shear zone that is 50 m or ten stations wide. Furthermore, the majority of refraction tomography programs parameterize the seismic velocities within each layer with vertical velocity gradients. By contrast, the 2D generalized reciprocal method (GRM) inversion algorithms emphasize the lateral resolution of individual layers. This study demonstrates the successful detection and definition of the 50-m wide shear zone with the GRM inversion algorithms. The existence of the shear zone is corroborated by a 2D analysis of the head wave amplitudes and by numerous closely spaced orthogonal seismic profiles carried out as part of a later 3D refraction investigation. Furthermore, a 1D analysis of the head wave amplitudes indicates that a reversal in the seismic velocities, rather than vertical velocity gradients, occurs in the weathered layers. While all seismic refraction operations should aim to provide as accurate depth estimates as is practical, the major conclusion reached in this study is that refraction Inversion algorithms that emphasize the lateral resolution of individual layers generate more useful results for geotechnical and environmental applications. The advantages of the Improved lateral resolution are obtained with 2D profiles in which the structural features can be recognized from the magnitudes of the variations in the seismic velocities. Furthermore, the spatial patterns obtained with 3D investigations facilitate the recognition of structural features that do not display any intrinsic variation or "signature" in seismic velocities. 相似文献
12.
Different polymorphs of silica and the opals exhibit significant variations in densities. The paper discusses and correlates
the variations in the molar refraction with density. It emerges that in different polymorphs of silica, the increase in density
involves a corresponding increase in the characteristic dispersion frequencies leading to a decrease in the molar refraction.
The variation of the molar refraction with density can be represented in terms of an elementary formula. The variation of
the molar refraction of opals with the water content in them is also accounted for. 相似文献
13.
14.
地震折射波勘探是工程与环境地球物理中应用最为广泛的方法之一。作为一种简洁方便又经济实惠的勘探方法,它可为工程地质提供近地表地层起伏变化和速度横向变化以及潜水面变化资料等。随着工程地质勘查和城市地质勘探工作的发展,工程地震折射波法数据处理与解释变得尤为重要。本文主要介绍了浅层地震折射波法的发展历程、应用条件,并总结和讨论了几种主要折射波解释方法的原理。在此基础上,比较并讨论了各种方法在应用中的优势和不足,阐述了近年来国内外浅层地震折射波法的发展现状及趋势,并着重介绍了作为研究热点的折射层析成像方法。研究表明:当探测深度较浅且分界面足够平整、界面倾角较小时,最方便的解释方法是截距时间法;当勘探目标的深度达到25 m时,t0差数法最为适用;勘探目标埋深超过25 m时,应当使用广义互换法。随着勘探精度要求越来越高,使用折射波走时层析成像技术可以满足纵横向速度变化的近地表地层,包括大倾角地层、隐伏层、界面起伏层等。 相似文献
15.
山区三维静校正方法研究 总被引:1,自引:0,他引:1
依托国家重大产业技术开发专项“西部煤炭资源高精度三维地震勘探技术”,对“山西国阳新能股份有限公司二矿390水平九采区高精度三维地震勘探”及山西阳泉五矿首采区老资料研究二个项目进行资料处理,以攻克影响勘探精度和分辨率的静校正问题。通过对二区块地震资料分别采用绿山折射静校正、综合折射静校正、层析静校正,发现综合折射静校正相对于绿山折射静校正,可以较好的解决静校正的短波长分量、长波长分量问题,更加准确的刻化出地质构造情况,而层析静校正能够更好地解决近地表横向速度变化大、地表没有同一稳定折射层、地表存在高速体等复杂地形的静校正问题,保证同相叠加和正确成像,提高资料的分辨率及勘探精度。 相似文献
16.