共查询到18条相似文献，搜索用时 265 毫秒
1.
叠前逆时偏移是对地下介质进行精确成像的方法之一。由于实际地下介质具有粘滞性,研究粘滞声波叠前逆时偏移具有一定的现实意义。逆时偏移的步骤之一是求解波动方程,对地震波场进行正向和反向外推,因此,精确、高效地求解波动方程对逆时偏移的成像效果和计算效率具有重要影响。本文中,我们利用基于优化时空域频散关系的高阶有限差分方法求解粘滞声波方程。频散分析和数值模拟的结果证明了优化时空域有限差分方法具有较高的精度,可以很好地压制数值频散。利用混合吸收边界条件处理边界反射,然后利用震源归一化互相关成像条件进行成像,并利用拉普拉斯滤波方法去除低频噪音。数值模型的测试结果显示,在考虑地下介质的粘滞性时,粘滞声波方程逆时偏移比声波方程逆时偏移具有更高的成像分辨率。另外,在进行波场外推的时候,采用自适应变长度的有限差分算子计算空间导数,在不影响求解精度的情况下,有效地提高了计算效率。 相似文献
2.
《地球物理学进展》2016,(1)
为克服各向同性和VTI介质逆时偏移方法对复杂地质构造成像的局限,研究了TTI介质拟声波逆时偏移方法.首先从精确的TTI介质频散关系出发,引入一个各向异性控制参数σ,推导了新的二阶耦合TTI介质拟声波方程,以保证波场延拓的稳定性;然后引入波场的伪速度分量,推导了等价的一阶拟声波方程.相比于规则网格有限差分法,交错网格有限差分(SGFD)法能够有效地压制数值频散,模拟精度更高;因此利用高阶SGFD法求解TTI介质一阶拟声波方程,构建逆时偏移所需的正向和逆时波场延拓算子,并应用归一化互相关成像条件实现精确的TTI介质逆时偏移成像.最后,简单讨论了伪横波的产生机制,并给出了伪横波的联合压制策略.模型试验结果验证了方法的有效性和稳定性. 相似文献
3.
叠前逆时偏移是目前成像精度最高的地震偏移方法之一,其实现过程中的一个重要步骤是数值求解全波方程,所以快速有效求解全波方程的数值算法对逆时偏移至关重要. 四阶近似解析辛可分Runge-Kutta (NSPRK) 方法是近年发展的一种具有高效率、高精度的数值求解波动方程的保辛差分方法, 能在粗网格条件下有效压制数值频散, 从而提高计算效率, 节省计算机内存需求量. 本文利用四阶NSPRK方法构造的基本思想,发展了具有六阶空间精度的NSPRK方法,并对新的六阶NSPRK方法进行了详细的稳定性和数值频散分析,以及计算效率比较和波场模拟. 同时将该方法用于声波叠前逆时偏移中, 得到一种时间上保辛、空间具有六阶精度、低数值频散、可应用大步长进行波场延拓并能长时计算的叠前逆时偏移方法,对Sigsbee2B模型进行了偏移成像, 并和四阶NSPRK方法、传统的六阶差分方法、四阶Lax-Wendroff correction (LWC) 方法进行了对比. 数值结果表明, 基于六阶NSPRK方法的叠前逆时偏移能得到更好的成像结果, 是一种优于四阶NSPRK方法、传统的六阶差分方法、四阶LWC叠前逆时偏移的方法, 尤其是在粗网格情况下具有更明显的优越性. 相似文献
4.
与地面地震资料相比,VSP资料具有分辨率高、环境噪声小及能更好地反映井旁信息等优点.常规VSP偏移主要对上行反射波进行成像,存在照明度低、成像范围受限等问题.为了增加照明度、拓宽成像范围、提高成像精度,本文采用直达波除外的所有声波波场数据(全波),包括一次反射波、多次反射波等进行叠前逆时偏移成像.针对逆时偏移中的四个关键问题,即波场延拓、吸收边界条件、成像条件及低频噪声的压制,本文分别采用自适应变空间差分算子长度的优化有限差分方法(自适应优化有限差分方法)求解二维声波波动方程以实现高精度、高效率的波场延拓,采用混合吸收边界条件压制因计算区域有限所引起的人工边界反射,采用震源归一化零延迟互相关成像条件进行成像,采用拉普拉斯滤波方法压制逆时偏移中产生的低频噪声.本文对VSP模型数据的逆时偏移成像进行了分析,结果表明:自适应优化有限差分方法比传统有限差分方法具有更高的模拟精度与计算效率,适用于VSP逆时偏移成像;全波场VSP逆时偏移成像比上行波VSP逆时偏移的成像范围大、成像效果好;相对于反褶积成像条件,震源归一化零延迟互相关成像条件具有稳定性好、计算效率高等优点.将本文方法应用于某实际VSP资料的逆时偏移成像,进一步验证了本文方法的正确性和有效性. 相似文献
5.
弹性波逆时偏移不受倾角和偏移孔径的限制,能够实现任意复杂构造的高精度多波成像,是目前最精确的多分量资料偏移成像方法之一.逆时偏移算法的核心是波场延拓,传统波场延拓以水平基准面为边界条件,基于固定采样步长进行规则网格剖分,采用阶梯近似法处理起伏地表和复杂构造界面时会产生台阶散射,严重影响起伏地表复杂构造的成像精度.基于无网格节点模型,定量分析了弹性波模拟中径向基函数有限差分法的频散关系和稳定性条件.基于此,提出一种基于QR径向基函数的高精度有限差分方法,并提出一种优化的起伏地表自适应节点剖分方法,推导了精确的无网格自由边界条件和弹性波无网格混合吸收边界条件,形成了新的基于无网格的起伏地表弹性波数值模拟方法.此外,本文将此无网格径向基函数有限差分方法应用于精确的纵横波场矢量分解公式,实现了起伏地表弹性波逆时偏移成像.通过对高斯山丘模型,起伏凹陷模型和起伏地表Marmousi-2模型进行数值试算,验证了本文方法的有效性和可行性. 相似文献
6.
通常工业界实现逆时偏移算法时采用有限差分数值方法模拟地震波场,波场模拟常常受稳定性条件限制,且易产生数值频散,成像精度降低.本文引入了一步法波场延拓方法,首先构建声波传播算子,借助Chebyshev多项式和Jacobi-Anger展开式近似传播算子中的e指数项,进而实现波场递推,该方法时间步长的选取不受稳定性条件限制而且不存在空间频散现象.本文将一步法波场延拓方法用于逆时偏移成像的波场模拟,并提出双缓冲区存储策略,在不增加计算量的前提下,大幅降低了逆时偏移方法的波场存储量.波场模拟和逆时偏移成像测试表明,本文提出的一步法波场延拓方法模拟地震波场精度高,消除了频散影响,可在较大时间步长的情况下实现高精度波场模拟;提出的基于一步法波场延拓的逆时偏移方法成像质量好;基于双缓冲区存储策略的逆时偏移成像方法存储成本低. 相似文献
7.
各向异性弹性波动方程多分量联合叠后逆时偏移 总被引：6，自引：1，他引：5
为了更好地描述地下介质的各向异性特性,实现准确的波场成像,开展了各向异性介质逆时偏移研究。采用高阶交错网格有限差分法推导出各向异性弹性波动方程叠后逆时深度偏移方程,证明各向异性介质向各向同性介质转化的条件,并研究Thom son参数对弹性波场的影响,合成了各向同性介质和各向异性介质多分量零偏移距剖面,实现了多分量模拟记录联合叠后逆时偏移。计算结果表明,能够准确地实现多分量波场叠后逆时成像,使地质层位中的断层、断点等目标成像清晰准确,且偏移成像精度较高,因此各向异性逆时偏移法是一种高精度的深度域偏移成像方法,可以指导实际天然地震资料和人工地震资料的数据处理。 相似文献
8.
压制数值频散,提高正演模拟精度,一直是有限差分正演模拟研究的重要内容.基于时空域频散关系的有限差分法,比基于空间域频散关系的传统有限差分法,模拟精度更高.时空域声波方程数值模拟,普遍采用常规十字交叉型高阶有限差分格式.而在频率-空间域,普遍采用旋转网格和常规网格混合的有限差分格式,有效提高了模拟精度和计算效率.本文将频率-空间域混合网格有限差分的思想引入到时空域,提出了时空域混合网格2 M+N型声波方程有限差分方法.首先推导出基于时空域频散关系的混合网格差分系数计算方法,然后进行频散分析、稳定性分析,并和传统高阶、时空域高阶有限差分法对比,结果表明:计算量相同时,新方法能有效压制数值频散,显著提高模拟精度;新方法相比传统2 M阶有限差分法,稳定性增强,与时空域2 M阶有限差分法稳定性基本相当.最后利用新方法进行均匀介质、层状介质、盐丘模型的数值模拟和盐丘模型的逆时偏移,模拟效果和成像质量进一步证实了该方法的有效性和普遍适用性. 相似文献
9.
10.
逆时偏移是识别地下高陡构造的有效方法,通常需利用高精度双程波动方程进行波场模拟是该算法的核心,有限差分是求解波动方程常用方式,但会受到模型速度参数、空间网格间距和时间采样间隔的限制,若采用互相关作为逆时偏移的成像条件,虽能够对复杂构造精确成像,可传统的互相关成像条件会引入低频噪声,影响成像结果信噪比.为提升逆时偏移的成像精度,压制低频噪声干扰,打破稳定性条件对地震波场求解的制约,提出了一种解析波场分离方法,基于一步法进行解析波场模拟,利用Hilbert变换实现解析波场的波场分离,进而形成了基于波场分离的逆时偏移成像方法.结合理论模型和VSP实际地震数据,给出了不同波场成分的逆时偏移成像结果.测试结果表明:提出的方法波场模拟稳定性强,且能够高效的进行上下行波波场分离,所得逆时偏移结果不含低频噪声和虚假反射,具有较高的信噪比. 相似文献
11.
It is important to include the viscous effect in seismic numerical modelling and seismic migration due to the ubiquitous viscosity in an actual subsurface medium. Prestack reverse‐time migration (RTM) is currently one of the most accurate methods for seismic imaging. One of the key steps of RTM is wavefield forward and backward extrapolation and how to solve the wave equation fast and accurately is the essence of this process. In this paper, we apply the time‐space domain dispersion‐relation‐based finite‐difference (FD) method for visco‐acoustic wave numerical modelling. Dispersion analysis and numerical modelling results demonstrate that the time‐space domain FD method has great accuracy and can effectively suppress numerical dispersion. Also, we use the time‐space domain FD method to solve the visco‐acoustic wave equation in wavefield extrapolation of RTM and apply the source‐normalized cross‐correlation imaging condition in migration. Improved imaging has been obtained in both synthetic and real data tests. The migration result of the visco‐acoustic wave RTM is clearer and more accurate than that of acoustic wave RTM. In addition, in the process of wavefield forward and backward extrapolation, we adopt adaptive variable‐length spatial operators to compute spatial derivatives to significantly decrease computing costs without reducing the accuracy of the numerical solution. 相似文献
12.
Viscoacoustic prestack reverse time migration based on the optimal time-space domain high-order finite-difference method 总被引：3，自引：1，他引：2
Prestack reverse time migration （RTM） is an accurate imaging method ofsubsurface media. The viscoacoustic prestack RTM is of practical significance because itconsiders the viscosity of the subsurface media. One of the steps of RTM is solving thewave equation and extrapolating the wave field forward and backward; therefore, solvingaccurately and efficiently the wave equation affects the imaging results and the efficiencyof RTM. In this study, we use the optimal time-space domain dispersion high-order finite-difference （FD） method to solve the viscoacoustic wave equation. Dispersion analysis andnumerical simulations show that the optimal time-space domain FD method is more accurateand suppresses the numerical dispersion. We use hybrid absorbing boundary conditions tohandle the boundary reflection. We also use source-normalized cross-correlation imagingconditions for migration and apply Laplace filtering to remove the low-frequency noise.Numerical modeling suggests that the viscoacoustic wave equation RTM has higher imagingresolution than the acoustic wave equation RTM when the viscosity of the subsurface isconsidered. In addition, for the wave field extrapolation, we use the adaptive variable-lengthFD operator to calculate the spatial derivatives and improve the computational efficiencywithout compromising the accuracy of the numerical solution. 相似文献
13.
Reverse-time migration (RTM) is based on seismic numerical modeling algorithms, and the accuracy and efficiency of RTM strongly depend on the algorithm used for numerical solution of wave equations. Finite-difference (FD) methods have been widely used to solve the wave equation in seismic numerical modeling and RTM. In this paper, we derive a series of time–space domain staggered-grid FD coefficients for acoustic vertical transversely isotropic (VTI) equations, and adopt these difference coefficients to solve the equations, then analyze the numerical dispersion and stability, and compare the time–space domain staggered-grid FD method with the conventional method. The numerical analysis results demonstrate that the time–space domain staggered-grid FD method has greater accuracy and better stability than the conventional method under the same discretizations. Moreover, we implement the pre-stack acoustic VTI RTM by the conventional and time–space domain high-order staggered-grid FD methods, respectively. The migration results reveal that the time–space domain staggered-grid FD method can provide clearer and more accurate image with little influence on computational efficiency, and the new FD method can adopt a larger time step to reduce the computation time and preserve the imaging accuracy as well in RTM. Meanwhile, when considering the anisotropy in RTM for the VTI model, the imaging quality of the acoustic VTI RTM is better than that of the acoustic isotropic RTM. 相似文献
14.
叠前深度偏移理论及方法一直是地震数据成像中研究的热点问题.业界对单程波叠前深度偏移方法和逆时深度偏移开展了深入的研究,但对双程波方程波场深度延拓理论及成像方法的研究还鲜有报道.本文以地表记录的波场值为基础,利用单程波传播算子估计波场对深度的偏导数,为在深度域求解双程波方程提供充分的边界条件,并提出利用矩阵分解理论实现双程波方程的波场深度外推.通过对强速度变化介质中传播波场的计算,与传统的单程波偏移方法相比,本文提出的偏移方法计算的波场与常规有限差分技术计算的波场相一致,证明了本方法计算的准确性.通过对SEAM模型的成像,在相同的成像参数下,与传统的单程波偏移算法和逆时深度偏移算法方法相比,本文提出的偏移方法能够提供更少的虚假成像和更清晰的成像结果.本文所提偏移算法具有深度偏移和双程波偏移的双重特色,推动和发展了双程波叠前深度偏移的理论和实践. 相似文献
15.
Reverse-time migration (RTM) directly solves the two-way wave equation for wavefield propagation; therefore, how to solve the wave equation accurately and quickly is very important for RTM. The conventional staggered-grid finite-difference (SFD) operators are usually based on the Taylor-series expansion theory. If they are used to solve wave equation on a larger frequency content, a strong dispersion will occur, which directly affects the seismic image quality. In this paper, we propose an optimal SFD operator based on least squares to solve acoustic wave equation for prestack RTM, and obtain a new antidispersion RTM algorithm that can use short spatial difference operators. The synthetic and real data tests demonstrate that the least squares SFD (LSSFD) operator can mitigate the numerical dispersion, and the acoustic RTM using the LSSFD operator can effectively improve image quality comparing with that using the Taylor-series expansion SFD (TESFD) operator. Moreover, the LSSFD method can adopt a shorter spatial difference operator to reduce the computing cost. 相似文献
16.
各向异性介质纯P波方程完全不受横波的干扰,在一定程度上可以减缓由于介质各向异性引起的数值不稳定,本文推导了具有垂直对称轴的横向各向同性(VTI)介质纯P波一阶速度-应力方程.由于纯P波方程存在一个分数形式的伪微分算子,无法直接采用有限差分法求解.针对该问题,本文采用伪谱法和高阶有限差分法联合求解波动方程,重点分析了混合法求解纯P波一阶速度-应力方程的稳定性问题,并给出了混合法求解纯P波方程的稳定性条件.数值模拟结果表明纯P波方程伪谱法和高阶有限差分混合法能够进行复杂介质的正演模拟,在强变速度、变密度的地球介质中仍然具有较好的稳定性. 相似文献
17.
Seismic wavefield modeling is important for improving seismic data processing and interpretation. Calculations of wavefield propagation are sometimes not stable when forward modeling of seismic wave uses large time steps for long times. Based on the Hamiltonian expression of the acoustic wave equation, we propose a structure-preserving method for seismic wavefield modeling by applying the symplectic finite-difference method on time grids and the Fourier finite-difference method on space grids to solve the acoustic wave equation. The proposed method is called the symplectic Fourier finite-difference (symplectic FFD) method, and offers high computational accuracy and improves the computational stability. Using acoustic approximation, we extend the method to anisotropic media. We discuss the calculations in the symplectic FFD method for seismic wavefield modeling of isotropic and anisotropic media, and use the BP salt model and BP TTI model to test the proposed method. The numerical examples suggest that the proposed method can be used in seismic modeling of strongly variable velocities, offering high computational accuracy and low numerical dispersion. The symplectic FFD method overcomes the residual qSV wave of seismic modeling in anisotropic media and maintains the stability of the wavefield propagation for large time steps. 相似文献
18.
O. HOLBERG 《Geophysical Prospecting》1988,36(2):99-114
Numerical wavefield extrapolation represents the backbone of any algorithm for depth migration pre- or post-stack. For such depth imaging techniques to yield reliable and interpretable results, the underlying wavefield extrapolation algorithm must propagate the waves through inhomogeneous media with a minimum of numerically induced distortion, over a range of frequencies and angles of propagation. A review of finite-difference (FD) approximations to the acoustic one-way wave equation in the space-frequency domain is presented. A straightforward generalization of the conventional FD formulation leads to an algorithm where the wavefield is continued downwards with space-variant symmetric convolutional operators. The operators can be precomputed and made accessible in tables such that the ratio between the temporal frequency and the local velocity is used to determine the correct operator at each grid point during the downward continuation. Convolutional operators are designed to fit the desired dispersion relation over a range of frequencies and angles of propagation such that the resulting numerical distortion is minimized. The optimization is constrained to ensure that evanescent energy and waves propagating at angles higher than the maximum design angle are attenuated in each extrapolation step. The resulting operators may be viewed as optimally truncated and bandlimited spatial versions of the familiar phase shift operator. They are unconditionally stable and can be applied explicitly. This results in a simple wave propagation algorithm, eminently suited for implementation on pipelined computers and on large parallel computing systems. 相似文献