首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 733 毫秒
1.
Cyclic mobility is a mechanism of ground failure due to lateral spreading of soils during an earthquake that usually occurs in soft or medium stiff saturated soils. The simplified procedures developed by the researchers give a factor of safety for judging the cyclic mobility potential. However, the simplified procedures do not take into account the uncertainty in the parameters required to estimate the cyclic stresses in the soil. In this study, a reliability framework based on the simplified procedure, considering the parameter uncertainty, has been proposed for computing the probability of cyclic mobility of clay deposits for a metro city of India, i.e., Mumbai city (latitudes 18°53′N–19°19′N and longitudes 72°47′E–72°58′E). Extensive geotechnical borehole data from 1028 boreholes across 50 locations in the city area of 390 km2 and laboratory test data are collected and analyzed thoroughly. A correlation between undrained shear strength (Su) and other parameters such as natural water content (w), SPT N value, liquid limit (LL) and plasticity index (PI) has been established for Mumbai city and has been used in the proposed approach. The sensitivity analysis of the proposed approach predicts that Su has significant influence in the evaluation of the cyclic mobility. Cyclic mobility hazard maps are prepared using the geo-statistical analysis tool in GIS, and it shows that the clayey soils at few locations have a 60–90 % probability of cyclic mobility for a moment magnitude (M w) of an earthquake of 7.5. These hazard maps can be used by the geotechnical engineers for the cyclic mobility hazard assessment of Mumbai city.  相似文献   

2.
Guwahati city is a major city in the northeastern region of India, which is growing rapidly in every aspect, particularly the major infrastructures like sports complex, educational institutions, flyovers, multiplex halls, etc. Two great earthquakes struck this region in 1897 and 1950, and large-scale liquefaction was reported in and around the Guwahati city. However, a detailed microzonation study for liquefaction is not available so far and is taken up accordingly. The liquefaction potential of the Guwahati city is estimated using hundred boreholes data located at different places of city with a design peak ground acceleration of 0.36?g. The results are presented in the form of factor of safety contours at several depths below the ground surface. These contour maps indicate that most of the sites in Guwahati city area are susceptible to liquefaction and hence this aspect has to be considered in earthquake-resistant design of foundations/structures in Guwahati city.  相似文献   

3.
In this paper, the ground motion at Guwahati city for an 8.1 magnitude earthquake on Oldham fault in the Shillong plateau has been estimated by stochastic finite-fault simulation method. The corresponding acceleration time histories on rock level at several sites in the epicentral region have been computed. These results are validated by comparing them with the estimates obtained from Medvedev–Sponheuer–Karnik (MSK) intensity observations of 1897 Shillong earthquake. Using the local soil parameters, the simulated rock level acceleration time history at Guwahati city is further amplified up to the ground surface by nonlinear site response analysis. The results obtained are presented in the form of peak ground acceleration (PGA) contour map. The maximum amplification for PGA over Guwahati city is as high as 2.5. Based on the simulated PGA, the liquefaction susceptibility at several locations in the city has been estimated. The results are presented in the form of contours of factor of safety against liquefaction at different depths below the ground surface. It is observed that over a large part of the Guwahati city, the factor of safety against liquefaction is less than one, indicating that the city is highly vulnerable to liquefaction in the event of this earthquake. The contour maps obtained can be used in identifying vulnerable areas and disaster mitigation.  相似文献   

4.
Geospatial contour mapping of shear wave velocity for Mumbai city   总被引：5，自引：3，他引：2  
Shear wave velocity is one of the most important input parameter in the analysis of geotechnical earthquake engineering problems, particularly to estimate site-specific amplification factor and ground response study. Dynamic in situ tests such as spectral analysis of surface waves (SASW) or multichannel analysis of surface waves (MASW) are very expensive. Also due to lack of specialized personnel, these tests are generally avoided in many soil investigation programs. Worldwide, several researchers have developed correlations between the SPT ‘N’ value and shear wave velocity ‘V s’, which are useful for determining the dynamic soil properties. In the present study, more than 400 numbers of soil borehole data were collected from various geotechnical investigation agencies, government engineering institutes and geotechnical laboratories from different parts of Mumbai city, which is financial capital of India with highest population density. In this paper, an attempt has been made to develop the correlation between the SPT ‘N’ value and shear wave velocity ‘V s’ for various soil profile of Mumbai city and compared with other existing correlations for different cities in India. Using Geographical Information System (GIS), a geospatial contour map of shear wave velocity profile for Mumbai city is prepared with contour intervals of 25 and 50 m/s. The scarcity of database or maps of shear wave velocity profile for Mumbai city will make the present geospatial contour maps extremely useful and beneficial to the designer, practitioners for seismic hazard study involved in geotechnical earthquake engineering.  相似文献   

5.
The liquefaction potential of saturated cohesionless deposits in Guwahati city, Assam, was evaluated. The critical cyclic stress ratio required to cause liquefaction and the cyclic stress ratio induced by an earthquake were obtained using the simplified empirical method developed by Seed and Idriss (J soil Mech Found Eng ASCE 97(SM9):1249–1273, 1971, Ground motions and soil liquefaction during earthquakes. Earthquake Engineering Research Institute, Berkeley, CA, 1982) and Seed et al. (J Geotech Eng ASCE 109(3):458–483, 1983, J Geotech Eng ASCE 111(12):1425–1445, 1985) and the Idriss and Boulanger (2004) method. Critical cyclic stress ratio was based on the empirical relationship between standard penetration resistance and cyclic stress ratio. The liquefaction potential was evaluated by determining factor of safety against liquefaction with depth for areas in the city. A soil database from 200 boreholes covering an area of 262 km2 was used for the purpose. A design peak ground acceleration of 0.36 g was used since Guwahati falls in zone V according to the seismic zoning map of India. The results show that 48 sites in Guwahati are vulnerable to liquefaction according to the Seed and Idriss method and 49 sites are vulnerable to liquefaction according to the Idriss and Boulanger method. Results are presented as maps showing zones of levels of risk of liquefaction.  相似文献   

6.
Mumbai city, the economical capital of India, is located on the west coast of stable intra-plate continental region of Peninsular India which has an experience of significant historical earthquakes in the past. The city stood as the fourth most populous city in the world. Recent seismo-tectonic studies of this city highlighted the presence of active West coast fault and Chiplun fault beneath the Deccan basalt. In the present study, spatial variability of probabilistic seismic hazard for Mumbai region (latitudes of 18.85–19.35°N and longitudes of 72.80–73.15°E at a grid spacing of 0.05°) which includes Mumbai city, Suburban, part of Thane district and Navi Mumbai, in terms of ground motion parameters; peak horizontal acceleration and spectral acceleration at 1.0-s period for 2 and 10 % probability of exceedance in 50 years are generated. The epistemic uncertainty in hazard estimation is accounted by employing seven different ground motion prediction equations developed for worldwide shallow crustal intra-plate environments. Further, the seismic hazard results are deaggregated for Mumbai (latitude 18.94°N, longitude 72.84°E) to understand the relative contributions of earthquake sources in terms of magnitude and distance. The generated hazard maps are compared with the zoning specified by Indian seismic code (IS1893: Part 1 in Indian standard criteria for earthquake-resistant design of structures, Part 1—General provisions and buildings. Bureau of Indian Standards, New Delhi, India, 2002) for rocky site. Present results show an underestimation of potential seismic hazard in the entire study region by non-probabilistic zoning prescribed by IS1893: Part 1 with significantly higher seismic hazard values in the southern part of Navi Mumbai.  相似文献   

7.
Irrigating food crops with treated wastewater is a popular management option in India. This study evaluated the impacts of land application of treated petrochemical effluent on soil chemical properties. Soil samples were collected from different depths from sites irrigated with petrochemical effluent for 2?years and from control sites. The effluent collected was analysed for different physic?Cchemical properties and its impact on Lagenaria siceraria (Bottle gourd) growth. 100% concentrated effluent was used for the study and compared with the control. It was observed that application of effluent significantly increased the major cations and anions in the field. On the basis of the study, it may be suggested that treated petrochemical effluent can be used as an alternate source for irrigating crops as it increases the nutrient content of the soil. The overall application indicates a lavishing growth of L. siceraria crop in petrochemical irrigated soil than control sites. This study provides information for better understanding of changes in soil properties due to land application of petrochemical effluent. These changes must be considered in developing possible criteria for preserving delicate ecosystems.  相似文献   

8.
A moderate earthquake (Ms = 6.2) occurred in the Cukurova region in the southern part of Turkey, on 27 June 1998. It resulted in loss of 145 lives and significant damage particularly in the settlements close to the epicenter at the south of Ceyhan town. Widespread liquefaction and associated sand boils, ground fissures and ground deformations due to lateral spreading occurred during this earthquake. In this study, main characteristics of the earthquake are presented and liquefaction throughout the site was assessed. An attempt was also made to establish preliminary microzonation maps for Ceyhan using the data from liquefaction susceptibility analyses. The results of the analyses indicated that the data from the liquefied sites were within the empirical bounds suggested by the field-performance evaluation method. Fortunately, most of the riversides were used for agricultural purposes alone, damage to structures from liquefaction and associated ground failures were rather limited. Preliminary assessments indicated that at depths of about 5 m the liquefaction potential of thin sand layers tends to diminish.  相似文献   

9.
This article describes a new performance-based approach for evaluating the return period of seismic soil liquefaction based on standard penetration test (SPT) and cone penetration test (CPT) data. The conventional liquefaction evaluation methods consider a single acceleration level and magnitude and these approaches fail to take into account the uncertainty in earthquake loading. The seismic hazard analysis based on the probabilistic method clearly shows that a particular acceleration value is being contributed by different magnitudes with varying probability. In the new method presented in this article, the entire range of ground shaking and the entire range of earthquake magnitude are considered and the liquefaction return period is evaluated based on the SPT and CPT data. This article explains the performance-based methodology for the liquefaction analysis – starting from probabilistic seismic hazard analysis (PSHA) for the evaluation of seismic hazard and the performance-based method to evaluate the liquefaction return period. A case study has been done for Bangalore, India, based on SPT data and converted CPT values. The comparison of results obtained from both the methods have been presented. In an area of 220 km2 in Bangalore city, the site class was assessed based on large number of borehole data and 58 Multi-channel analysis of surface wave survey. Using the site class and peak acceleration at rock depth from PSHA, the peak ground acceleration at the ground surface was estimated using probabilistic approach. The liquefaction analysis was done based on 450 borehole data obtained in the study area. The results of CPT match well with the results obtained from similar analysis with SPT data.  相似文献   

10.
According to the latest UNFA Report on state of world population 2007, unleashing the potential of urban growth by 2030, the urban population will rise to 5 billion or 60?% of the world population. Liquefaction in urban areas is dangerous phenomenon, which cause more damage to buildings and loss of human lives. Chennai, the capital city of the State Tamil Nadu in India, is one of the densely populated cities in the country. The city has experienced moderate magnitude earthquakes in the past and also categorized under moderate seismic hazard as per the Bureau of Indian Standards (BIS in Criteria for earthquake resistant design of structures; Bureau of Indian Standards, New Delhi, 1893 2001). A study has been carried out to evaluate the liquefaction potential of Chennai city using geological and geomorphological characteristics. The subsurface lithology and geomorphological maps were combined in the GIS platform for assessing the liquefaction potential. The liquefaction hazard broadly classified into three categories viz., liquefaction likely, possible and not likely areas. Mainly, the liquefaction likely areas spread along the coastal areas and around the river beds. The rest of the areas are liquefaction not likely and possible. The present map can be used as first-hand information on regional liquefaction potential for the city, and it will be help to the scientists, engineers and planners who are working for future site-specific studies of the city.  相似文献   

11.
One of the most important causes of damages after the earthquakes is the soil liquefaction. Liquefaction can be defined as temporary loss in strength of saturated sandy and silty deposits under transient and cyclic loadings due to excess pore water pressure. This study includes determination of liquefaction potential in Erzincan city center and its vicinity. Due to the proximity of the North Anatolian Fault Zone, in a probable earthquake, Erzincan Province is thought to be affected. In this context, the earthquake scenarios were produced using the empirical expressions. Liquefaction potential for different earthquake magnitudes was determined. These earthquake magnitudes were selected as 6.0, 6.5, 7.0, 7.5, respectively. Liquefaction potential was investigated using standard penetration test (SPT) data. The first stage of the study, 63 boreholes in different locations was drilled and SPT was performed. Disturbed and undisturbed soil samples were taken from these boreholes. Laboratory testing was performed to determine physical properties of soil samples, and liquefaction potential analyses were examined using three methods, namely Seed and Idriss (J Soil Mech Found Div ASCE 97(9):1249–1273, 1971), Tokimatsu and Yoshimi (Soil Found 23(4):56–74, 1983), Iwasaki et al. (Soil liquefaction potential evaluation with use of the simplified procedure. International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, St. Louis, pp 209–214, 1981). In order to complete liquefaction analysis within a short time, MATLAB program was prepared. Liquefaction potential analyses were carried out with the MATLAB program. At the final stage of this study, liquefaction potential maps were prepared for different earthquake magnitudes. The expected results will be shared with the local authorities and important engineering remedial measurements will be proposed to prevent further life losses and to mitigate property losses.  相似文献   

12.
This study presents the results of both field and laboratory tests that have been undertaken to assess liquefaction susceptibilities of the soils in Kütahya city, located in the well-known seismically active fault zone. Liquefaction potentials of the sub-surface materials at Kütahya city were estimated by using the geological aspect and geotechnical methods such as SPT method of field testing. And, the data obtained have been mapped according to susceptibility and hazard. The susceptibility map indicated “liquefable” and “marginally liquefable” areas in alluvium, and “non-liquefable” areas in Neogene unit for the magnitude of earthquake of M=6.5; whereas, liquefaction hazard map produced by using of liquefaction potential index showed the severity categories from “very low” to “high.” However, a large area in the study area is prone to liquefy according to liquefaction susceptibility map; the large parts of the liquefable horizon are mapped as “low” class of severity by the use of the liquefaction potential index. It can be said that hazard mapping of liquefaction for a given site is crucial than producing liquefaction susceptibility map for estimating the severity. Both the susceptibility and hazard maps should be produced and correlated with each other for planning in an engineering point of view.  相似文献   

13.
Kachchh region of India is a rift basin filled with sediments from Jurassic to Quaternary ages. This area is tectonically active and witnessed several major earthquakes since the recent historical past. During an earthquake event, the water-laden foundation soil liquefies and causes damage to buildings and other civil engineering structures. The January 26, 2001, Bhuj earthquake demonstrated extensive liquefaction-related damages in entire Kachchh Peninsula. Therefore, evaluation of liquefaction susceptibility of unconsolidated sediments is a vital requirement for developing seismic microzonation maps. In this paper, a new approach involving remote sensing techniques and geotechnical procedures is demonstrated for effective mapping of liquefaction-susceptible areas. The present and paleo-alluvial areas representing unconsolidated sediments were mapped using Landsat-TM data and field reflectance spectra. Spectral discrimination of alluvial area was made using the feature-oriented principal component selection and spectral angle mapping techniques. Subsequently, field geotechnical investigations were carried out in these areas. It is evident from the results that the alluvial soils are predominantly sandy loam with very low (7–28) standard penetration test values. The evaluated factor of safety for these soils varies from 0.43 to 1.7 for a peak ground acceleration of 0.38. Finally, a liquefaction susceptibility map is prepared by integrating results on alluvium distribution, factor of safety, and depth to water table.  相似文献   

14.
Any earthquake event is associated with a rupture mechanism at the source, propagation of seismic waves through underlying rock and finally these waves travel through the soil layers to the particular site of interest. The bedrock motion is significantly modified at the ground surface due to the presence of local soil layers above the bedrock beneath the site of interest. The estimation of the amplifications in ground response due to the local soil sites is a complex problem to the designers and the problem is more important for mega cities like Mumbai in India, where huge population may get affected due to devastations of earthquake. In the present study, the effect of local soil sites in modifying ground response is studied by performing one dimensional equivalent-linear ground response analysis for some of the typical Mumbai soil sites. Field borelog data of some typical sites in Mumbai city viz. Mangalwadi site, Walkeswar site, BJ Marg near Pandhari Chawl site are considered in this study. The ground responses are observed for range of input motions and the results are presented in terms of surface acceleration time history, ratio of shear stress to vertical effective stress versus time, acceleration response spectrum, Fourier amplitude ratio versus frequency etc. The typical amplifications of ground accelerations considering four strong ground motions with wide variation of low to high MHA, frequency contents and durations are obtained. Results show that MHA, bracketed duration, frequency content have significant effects on the amplification of seismic accelerations for typical 2001 Bhuj motion. The peak ground acceleration amplification factors are found to be about 2.50 for Mangalwadi site, 2.60 for Walkeswar site and 3.45 for BJ Marg site using 2001 Bhuj input motion. The response spectrum along various soil layers are obtained which will be useful for designers for earthquake resistant design of geotechnical structures in Mumbai for similar sites in the absence of site specific data.  相似文献   

15.
Liquefaction resistance of granular soils is commonly characterized by the cyclic resistance ratio (CRR) in the simplified shear stress procedure of liquefaction potential assessment. This parameter is commonly estimated by cyclic tests on reconstituted samples or empirical correlations between liquefied/non-liquefied case histories. The current study employs results of cyclic triaxial tests on reconstituted soil specimens and presents a predictive equation for cyclic resistance ratio (CRR) of clean and silty sands. The CRR equation is a function of relative density, effective mean confining pressure, non-plastic fines content, number of harmonic cycles for liquefaction onset, and some other basic soil properties. It is demonstrated that the developed relationship obtains reasonable accuracy in the prediction of laboratory-based CRR. Based on the developed CRR model, new relationships are then presented for the coefficient of effective overburden pressure (Kσ) and magnitude scaling factor (MSF), two important modification factors in the simplified shear stress procedure. These new modification factors are then compared with those recommended by previous researchers. Finally, the possible application of the proposed CRR model in field condition is shown for a specific case. This study provides a preliminary insight into the liquefaction resistance of silty sands prior to the complementary laboratory studies.  相似文献   

16.
On 25 December 1884, an earthquake of epicentral intensityI 0 = IX in the MSK scale caused great damage in a large area in the provinces of Granada and Málaga, in the south of Spain. The reports of the Spanish, Italian and French Commissions that studied the earthquake described ground phenomena in seven different sites which can be identified as soil liquefaction.By means of dynamic penetration tests carried out in the above sites, the corresponding soil profiles (based on SPT data and water table depth) were established, and the occurrence of liquefaction was proved in five out of seven of these sites. Also, the intensities at such locations and the magnitude of the earthquake were estimated.From the geotechnical data and the cyclic stress ratio induced by the earthquake, liquefaction conditions were confirmed in all the five sites which presumably liquefied. Then, possible values of the minimum ground surface accelerations necessary for the onset of liquefaction at each location were calculated. The results obtained were completed with data reported in six liquefaction case studies from Japan and the United States, from which design charts relating soil acceleration with normalized SPT values for different intensity levels were drawn.Finally, by using standard attenuation curves, the above data were translated into epicentral distances, and good agreement with the known epicentral area was found. As a result, a consistent approach for liquefaction hazard and source location problems has been developed. The proposed method combines in its formulation historical evidence and earthquake engineering techniques.  相似文献   

17.
The Surat City, which is the second most populated city in the state of Gujarat in western India, warrants site-specific seismic hazard assessment due to its rapid urbanization and proximity to major seismogenic zones. This study reports results of microtremor investigations at 72 single stations and 4 arrays in an area of 325 km2 spanning the city. The resonant frequencies, associated peak amplification values and liquefaction vulnerability indices were deduced from the horizontal to vertical spectral ratios. Ground amplification (AHVSR) in the range of 3.0–5.0 was observed in the 2.0–4.0-Hz frequency band at most of the sites. A secondary AHVSR between 2.0 and 3.0 is also observed in the 6.0–7.0-Hz frequency band at a few sites. Locales that are most susceptible to liquefaction are identified based on their vulnerability index (K g) exceeding the value of 10. The shear wave velocities (V s) ≥ 500 m/s inferred from array measurements occur at 38 m depth in the western part and ~16 m depth in the eastern part of city. The response spectra estimated from strong motion data recorded at an accelerograph site in Surat from three earthquakes of M w ≥ 3.2 that occurred in Kachchh, Saurashtra and Narmada regions are in accordance with our inferences of characteristic site frequencies and amplification. Our results, in agreement with the damage scenario during the 2001 Bhuj earthquake, provide valuable inputs for site-specific seismic hazard evaluation of the Surat City.  相似文献   

18.
The performance-based liquefaction potential analysis was carried out in the present study to estimate the liquefaction return period for Bangalore, India, through a probabilistic approach. In this approach, the entire range of peak ground acceleration (PGA) and earthquake magnitudes was used in the evaluation of liquefaction return period. The seismic hazard analysis for the study area was done using probabilistic approach to evaluate the peak horizontal acceleration at bed rock level. Based on the results of the multichannel analysis of surface wave, it was found that the study area belonged to site class D. The PGA values for the study area were evaluated for site class D by considering the local site effects. The soil resistance for the study area was characterized using the standard penetration test (SPT) values obtained from 450 boreholes. These SPT data along with the PGA values obtained from the probabilistic seismic hazard analysis were used to evaluate the liquefaction return period for the study area. The contour plot showing the spatial variation of factor of safety against liquefaction and the corrected SPT values required for preventing liquefaction for a return period of 475 years at depths of 3 and 6 m are presented in this paper. The entire process of liquefaction potential evaluation, starting from collection of earthquake data, identifying the seismic sources, evaluation of seismic hazard and the assessment of liquefaction return period were carried out, and the entire analysis was done based on the probabilistic approach.  相似文献   

19.
This article adopts least square support vector machine (LSSVM) for determination of liquefactions susceptibility of soil based on standard penetration test data. Two models (Models I and II) have been developed. For Model I, input variables are cyclic stress ratio and standard penetration test value (N). Model II employs peak ground acceleration and N as input variables. The developed LSSVM models (Models I and II) give equations for determination of liquefaction susceptibility of soil. The performances of Models I and II are the same. The developed LSSVM gives probabilistic output. The results of LSSVM have been compared with the artificial neural network model. This article shows that N and the peak ground acceleration are sufficient input parameters for determination of liquefaction susceptibility of soil. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

20.
A liquefaction severity index suggested for engineering practice   总被引：4，自引：0，他引：4  
One of the major tasks in earthquake geotechnical engineering is the preparation of liquefaction susceptibility maps. For this purpose, some indices associated with liquefaction susceptibility are used. However, the currently used indices have some limitations. In this study, a liquefaction severity index, which can be used in preparation of susceptibility maps, is suggested. The suggested severity index is applied to two sites selected from Taiwan (Yuanlin) and Turkey (Inegol) to examine performance. The application indicated that the suggested index shows a good performance for the selected sites, and can be considered as a tool for further studies.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号