首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
In a gravel pit at the eastern margin of the Eisenstadt-Sopron Basin, a satellite of Vienna Basin (Austria), Neogene sediments are exposed in the hanging wall of a major normal fault. The anticlinal structure and associated conjugated secondary normal faults were previously interpreted as a rollover anticline above a listric normal fault. The spatial orientation and distribution of sedimentary horizons and crosscutting faults were mapped in detail on a laser scan of the outcrop wall. Subsequently, in order to assess the 3D distribution and geometry of this fault system, a series of parallel ground penetrating radar (GPR) profiles were recorded behind the outcrop wall. Both outcrop and GPR data were compiled in a 3D structural model, providing the basis for a kinematic reconstruction of the fault plane using balanced cross-section techniques. However, the kinematic reconstruction results in a geologically meaningless normal fault cutting down- and up-section. Additionally, no evidence for a weak layer serving as ductile detachment horizon (i.e. salt or clay horizon) can be identified in stratigraphic profiles. Instead, the observed deflection of stratigraphic horizons may be caused by a displacement gradient along a planar master fault, with a maximum displacement in the fault centre, decreasing towards the fault tips. Accordingly, the observed deflection of markers in the hanging wall—and in a nearby location in the footwall of the normal fault—is interpreted as large-scale fault drag along a planar fault that records a displacement gradient, instead of a rollover anticline related to a listric fault.  相似文献   

2.
The northern segment of the Chelungpu Fault shows an unusually large co-seismic displacement from the event of the Mw 7.6 Chi-Chi earthquake in western Taiwan. Part of the northern segment near the Fengyuan City provides an excellent opportunity for characterizing active thrust-related structures due to a dense geodetic-benchmark network. We reproduced co-seismic deformation patterns of a small segment of this Chelungpu Fault using 924 geodetic benchmarks. According to the estimated displacement vectors, we identified secondary deformations, such as local rigid-block rotation and significant shortening within the hanging wall. The data set also allows us to determine accurately a 3D model of the thrust fault geometry in the shallow subsurface by assuming simple relations between the fault slip, and the horizontal and vertical displacements at the surface. The predicted thrust geometry is in good agreement with borehole data derived from two drilling sites close to the study area. The successful prediction supports our assumptions of rigid displacement and control of displacement in the hanging wall by the fault geometry being useful first approximations.  相似文献   

3.
通过综合3D地震数据及钻井资料,以三级层序为时间单元制作了不同时期断层位移曲线和断面倾角分布图,对西南庄断层分段的断面几何学与东营组时期运动学特征进行分析。结果表明西南庄断层分段控制了其上盘褶皱几何形态。其中,向斜(半地堑)位于断层位移极大段,背斜位于断层位移极小处即断层段连接处;断层分段的几何学与运动学特征具有明显对应关系,在位移极大段,断层面较陡,而断层段连接处,断层位移较小,对应的断层倾角也较小。边界断层分段活动控制了盆地内可容纳空间、物源供应和古地貌。在断层段中央附近断层活动速率最大,物源供应速率最低,可容纳空间一直是增长的,层序内部准层序以退积和加积式叠置方式为主。而断层段连接处,断层活动速率最小,物源供应速率最高,可容纳空间以下降为主,层序内部准层序以进积式叠置方式为主。因此,沿边界断层走向断层活动性差异控制了层序内部构成样式,是控制断陷盆地陡坡带储层和烃源岩发育的主要因素。  相似文献   

4.
Stresses in a block around a dipping fracture simulating a damage zone of a fault are reconstructed by finite-element modeling. A fracture corresponding to a fault of different lengths, with its plane dipping at different angles, is assumed to follow a lithological interface and to experience either compression or shear. The stress associated with the destruction shows an asymmetrical pattern with different distances from the highest stress sites to the fault plane in the hanging and foot walls. As the dip angle decreases,the high-stress zone becomes wider in the hanging wall but its width changes negligibly in the foot wall.The length of the simulated fault and the deformation type affect only the magnitude of maximum stress,which remains asymmetrical relative to the fault plane. The Lh/Lfratio, where Lhand Lfare the widths of high-stress zones in the hanging and foot walls of the fault, respectively, is inversely proportional to the fault plane dip. The arithmetic mean of this ratio over different fault lengths in fractures subject to compression changes from 0.29 at a dip of 80°to 1.67 at 30°. In the case of shift displacement, ratios are increasing to 1.2 and 2.94, respectively.Usually they consider vertical fault planes and symmetry in a damage zone of faults. Following that assumption may cause errors in reconstructions of stress and fault patterns in areas of complex structural setting. According geological data, we know the structures are different and asymmetric in hanging and foot walls of fault. Thus, it is important to quantify zones of that asymmetry. The modeling results have to be taken into account in studies of natural faults, especially for practical applications in seismic risk mapping, engineering geology, hydrogeology, and tectonics.  相似文献   

5.
3D field data on mesoscale normal faults were collected to examine the geometries and growth of faults in multilayer systems. Observation and analysis of the fractures include the collection of geometric attributes such as fault dips and fault zone thicknesses, detailed mapping in cross-sections and plan views, and the construction of individual and cumulative displacement profiles. Fault zone growth is consistent with a “coherent model” and is strongly influenced by the multilayer system. In the limestone layers, faults grew in several steps, including opening and frictional sliding on 80° dipping segments. Faulting in clay layers was in the form of 40° dipping faults and sub-horizontal faults, the latter being mostly early features developed under the same extensional regime as normal faults and disturbing the fault architecture. The fault zone thickness increases with the limestone thickness and the presence of sub-horizontal faults in clay beds. Numerous connections occur in clay units. The moderate (≈0.08) and low (<0.03) mean displacement gradients in clays and in limestones respectively indicate that the vertical propagation of faults is inhibited in clay layers. Analysis of displacement along fault strike indicates that a 0.08 displacement gradient is associated with the horizontal propagation of fault segments in limestones. According to this value, the fault zones are much longer than expected. It is associated with ‘flat topped’ displacement profiles along some fault segments and connection between segments to form complex fault zones.  相似文献   

6.
The purpose of this paper is to demonstrate the possible influence of an earthquake on the resistivity distribution in a fault zone. We collected resistivity image profiles across a proposed fault trace prior to the 7.3 magnitude 1999 shallow earthquake in the Chi-Chi area of Taiwan. Significant positive resistivity anomalies were observed in the hanging wall after the earthquake. However, there were negligible resistivity changes in the footwall. From an examination of geoelectric phenomena and surface rupture in the fault zone, it is believed that geoelectric anomalies are associated with abrupt displacement along the active Chelungpu fault. This result indicates a potential for resistivity methods to provide a basis for the monitoring of an active fault.  相似文献   

7.
The western Liaodong (辽东) Bay subbasin displays examples of segment,linkage of extensional fault,and fault-related folds.The Liaoxi (辽西) extensional fault system consists of a series of NNE- and NE-trending segments that were linked through relay ramps.The fault hanging walls are characterized by a series of en echelon synclines with axial traces sub-parallel to the faults.The synclines are doubly plunging located on the hanging wall of normal faults,with the strata dip sub-parallel to the fault.These folds result from along-strike displacement variations of the individual fault segments,as well as from extensional fault-related folding.In the study area,the synclines are separated by transverse intra-basin highs and relay ramps that formed where segment linkage occurred.These hanging wall synclines and their relation to fault displacement variations indicate that they are formed by extensional fault-related fold.  相似文献   

8.
The Pinjore Garden Fault (PGF) striking NNW-SSE is now considered one of the active faults displacing the younger Quaternary surfaces in the piggyback basin of Pinjore Dun. This has displaced the older Kalka and Pinjore surfaces, along with the other younger surfaces giving rise to WSW and SW-facing fault scarps with heights ranging from 2 to 16 m. The PGF represents a younger branch of the Main Boundary Thrust (MBT) system. An ~ 4m wide trench excavated across the PGF has revealed displacement of younger Quaternary deposits along a low angle thrust fault. Either side of the trench-walls reveals contrasting slip-related deformation of lithounits. The northern wall shows displacement of lithounits along a low-angle thrust fault, while the southern wall shows well-developed fault-related folding of thick sand unit. The sudden change in the deformational features on the southern wall is an evidence of the changing fault geometry within a short distance. Out of five prominent lithounits identified in the trench, the lower four units show displacement along a single fault. The basal unit ‘A’ shows maximum displacement of aboutT o = 2.85 m, unit B = 1.8 m and unit C = 1.45 m. The displacement measured between the sedimentary units and retro-deformation of trench log suggests that at least two earthquake events have occurred along the PGF. The units A and D mark the event horizons. Considering the average amount of displacement during one single event (2 m) and the minimum length of the fault trace (~ 45 km), the behaviour of PGF seems similar to that of the Himalayan Frontal Fault (HFF) and appears capable of producing large magnitude earthquakes.  相似文献   

9.
We investigated the Cretaceous Potiguar Basin in the Equatorial margin of Brazil to understand how the geometry of major faults evolved to form the basin internal architecture. Previous studies pointed out that the rift is an asymmetrical half-graben elongated along the NE-SW direction. We used 2D seismic, well logs and 3D gravity modeling to analyze faults that constitute the rift boundary and determine their maximum displacement (Dmax) and length (L) ratio in the Potiguar Rift. We constrained the 3D gravity modeling with well data and the interpretation of seismic sections. The difference of the fault displacement and depth of the basement obtained in the gravity model is in the order of 10% compared to seismic and well data. The fault-growth curves allowed us to divide the faulted rift border into four main fault systems, which provide roughly similar Dmax/L ratios. Fault-growth curves suggest that a regional uniform tectonic mechanism influenced growth of these faults. These fault systems are composed of minor faults that we define as segments. The variation of the displacements along the fault segments indicates that the fault systems were formed independently during rift initiation and were linked by hard and soft linkages. The latter formed relay ramps. In the interconnection zones the Dmax/L ratios are highest due to interference of fault segment motions. We divided the evolution of the Potiguar Rift into five stages based on these ratios and correlated them with the major tectonic stages of the breakup between South America and Africa in the Early Cretaceous.  相似文献   

10.
范世家  薛伟 《地质论评》2022,68(1):167-180
本文以焦家断裂带深部上盘发现金矿体的地质事实为依据,将焦家断裂在成矿后对矿体的破坏作用作为讨论重点,根据现今焦家断裂上、下盘金矿体以断层泥为界,有被错断的明显特征,指出发育在焦家断裂主断裂面中的断层泥为成矿后断裂活动的产物.依据上、下盘金矿在矿石类型、围岩蚀变、矿石矿物、成矿阶段等方面具有极为相似一致特征,提出在117...  相似文献   

11.
The geometry and architecture of a well exposed syn-rift normal fault array in the Suez rift is examined. At pre-rift level, the Nukhul fault consists of a single zone of intense deformation up to 10 m wide, with a significant monocline in the hanging wall and much more limited folding in the footwall. At syn-rift level, the fault zone is characterised by a single discrete fault zone less than 2 m wide, with damage zone faults up to approximately 200 m into the hanging wall, and with no significant monocline developed. The evolution of the fault from a buried structure with associated fault-propagation folding, to a surface-breaking structure with associated surface faulting, has led to enhanced bedding-parallel slip at lower levels that is absent at higher levels. Strain is enhanced at breached relay ramps and bends inherited from pre-existing structures that were reactivated during rifting. Damage zone faults observed within the pre-rift show ramp-flat geometries associated with contrast in competency of the layers cut and commonly contain zones of scaly shale or clay smear. Damage zone faults within the syn-rift are commonly very straight, and may be discrete fault planes with no visible fault rock at the scale of observation, or contain relatively thin and simple zones of scaly shale or gouge. The geometric and architectural evolution of the fault array is interpreted to be the result of (i) the evolution from distributed trishear deformation during upward propagation of buried fault tips to surface faulting after faults breach the surface; (ii) differences in deformation response between lithified pre-rift units that display high competence contrasts during deformation, and unlithified syn-rift units that display low competence contrasts during deformation, and; (iii) the history of segmentation, growth and linkage of the faults that make up the fault array. This has important implications for fluid flow in fault zones.  相似文献   

12.
范世家  薛伟 《地质论评》2021,67(5):67060010-67060010
本文以焦家断裂带深部上盘发现金矿体的地质事实为依据，将焦家断裂在成矿后对矿体的破坏作用作为讨论重点，根据现今焦家断裂上、下盘金矿体以断层泥为界，有被错断的明显特征，指出发育在焦家断裂主断裂面中的断层泥为成矿后断裂活动的产物。依据上、下盘金矿在矿石类型、围岩蚀变、矿石矿物、成矿阶段等方面具有极为相似一致特征，提出在117.69~121 Ma成矿期，焦家断裂带中的上、下盘蚀变岩型金矿统一形成于深度3~9 km之间成矿期的焦家断裂带中，二者在成矿时具有时、空上的完全统一性。受焦家断裂总体正断层效应影响，现今焦家断裂深部新发现的上盘金矿（化）体应为下盘金矿（化）体被错断的部分。  相似文献   

13.
黄骅坳陷中区新生代断裂系统及其成因分析   总被引：7，自引：2，他引：5       下载免费PDF全文
何书  杨桥  漆家福  王家鼎 《地质科学》2008,43(3):533-545
断裂是黄骅坳陷新生代主要构造变形类型,对该区油气成藏有重要影响。本文将黄骅坳陷中区的断裂划分为6个系统,并综合分析了它们之间的关系。每一断裂系统至少有一条主干基底断层,发育在该断层上、下盘的次级断层以不同形式与主干基底断层组合在一起,其剖面上的构造样式和平面上的构造组合显示了该断裂系统在新生代的运动学特征。在系统分析黄骅坳陷中区新生代断裂系统的断层组合、构造样式、主干断层位移方式及生长史的基础上,结合区域构造背景、伸展边界条件及断层间的相互作用,探讨了该区断裂系统的形成机制。分析结果表明:区域构造背景下存在的伸展边界控制了整个黄骅坳陷中区新生代断裂系统总的构造格局,系统中主要断层走向与伸展边界近于平行。这进一步证实了区内右旋走滑作用与伸展作用的相互耦合,致使断层沿走滑构造带出现转向或中断。各断裂系统之间及系统内部断层间的运动学关系表明黄骅坳陷古近纪受两个构造动力控制,一是地幔热作用引起岩石圈北西—南东向引张作用,二是北北东向深断裂带的右旋剪切作用。  相似文献   

14.
We present results from petrophysical analysis of a normal fault zone with the aim of defining the flow pathways and their behavior during seismic and interseismic periods. Data are obtained on porosity geometry, strain structure and mineralogy of different domains of a normal fault zone in the Corinth rift. Data point out a close relationship between mineralogy of the clayey minerals, porosity network and strain structures and allow definition of a macroscopic anisotropy of the flow parameters with a strong control by microscopic ultracataclasite structures. The Pirgaki fault zone, developed within pelagic limestone, has a sharp asymmetric porosity profile, with a high porosity volume in the fault core and in the damage zone of the hanging wall. From porosity volumes and threshold measurements, a matrix permeability variation of 6 orders of magnitude could be expected between the protolith and the fault core. Modifications of this pathway during seismic and interseismic phases are depicted. Healing of cracks formed during seismic slip events occurred in the fault core zone and the porous network in the damage zone is sealed in a second step. The lens geometry of the fault core zone is associated with dissolution surfaces and open conduits where dissolved matter could move out of the fault core zone. These elementary processes are developed in particular along Riedel's structures and depend on the orientation of the strain surfaces relative to the local stress and depend also on the roughness of each surface type. P-surfaces are smooth and control shearing process. R-surfaces are rough and present two wavelengths of roughness. The long one controls localization of dissolution surfaces and conduits; the short one is characteristic of dissolution surfaces. The dissolved matter can precipitate in the open structures of the hanging wall damage zone, decreasing the connectivity of the macroscopic conduit developed within this part of the fault zone.  相似文献   

15.
The NW-dipping Fiery Creek Fault System, located in the northern Mount Isa terrane, comprises numerous sub-parallel faults that record multiple episodes of Palaeo- to Mesoproterozoic movement. Hanging wall wedge-shaped stratal geometries and marked stratal thickness variation across the fault system indicate that the earliest movement occurred during episodic intracontinental extension (Mount Isa Rift Event; ca. 1710–1655 Ma). Reactivation of the fault system during regional shortening and basin inversion associated with the Mesoproterozoic Isan Orogeny (ca. 1590–1500 Ma) resulted in complex three-dimensional hanging wall geometries and highly variable strain in the hanging wall strata along the fault system. This has resulted in the development of discrete hanging wall deformation compartments, that are characterised by different structural styles. High strain compartments are characterised by relatively intense folding and the development of break-back thrusts, whereas low strain compartments are only weakly folded. Variations in hanging wall strain are attributed to selective reactivation of normal fault segments, controlled by the pre-inversion fault dip and lithological contrasts across the faults. Variation of the pre-inversion fault dip is interpreted to have been caused by episodic tilt-block rotation during crustal extension. Moderately dipping faults active early in the Mount Isa Rift Event show the greatest degree of reactivation, whereas younger and steeper normal faults have behaved as buttresses during inversion with strain focussed in zones of upright folding in the hanging wall.  相似文献   

16.
Palaeoseismological and archaeoseismological studies in the Kurai fault zone, along which the Kurai Range is thrust onto Cenozoic deposits of the Chuya intramontane basin, led to the identification of a long reverse fault scarp 8.0 m high. The scarp segments are primary seismic deformations of large ancient earthquakes. The scarp’s morphology, results of trenching investigations, and deformations of Neogene deposits indicate a thrusting of the piedmont plain onto the Kurai Range, which is unique for the Gorny Altai. Similarly for Northern Tien Shan, we explain this by the formation of both a thrust transporting the mountain range onto the depression and a branching thrust dislocation that forms the detected fault scarp. In a trench made in one of the scarp segments, we identified the parameters of the seismogenic fault – a thrust with a 30° dipping plane. The reconstructed displacement along the fault plane is 4.8 m and the vertical displacement is 2.4 m, which indicates a 7.2–7.6 magnitude of the ancient earthquake. The 14C age of the humus-rich loamy sand from the lower part of the colluvial wedge constrains the age of the earthquake at 3403–3059 years BP. Younger than 2500 years seismogenic displacements along the fault scarp are indicated by deformations of cairn structures of the Turalu–Dzhyurt-III burial mound, which was previously dated as iron age between the second half of I BC and I AD.  相似文献   

17.
The Gubbio fault is an active normal fault defined by an important morphological scarp and normal fault focal mechanism solutions. This fault truncates the inherited Miocene Gubbio anticline and juxtaposes Mesozoic limestones in the footwall against Quaternary lacustrine deposits in the hanging wall. The offset is more than 2000 m of geological throw accumulated during a poly-phased history, as suggested by previous works, and has generated a complex zone of carbonate-rich fault-related structures. We report the results of a multidisciplinary study that integrates detailed outcrop and petrographic analysis of two well-exposed areas along the Gubbio fault zone, geochemical analysis (fluid inclusions, stable isotopes, and trace elements) of calcite-sealed fault-related structures and fault rocks, and biostratigraphic controls. Our aims are: (i) the characterization of the deformation features and their spatial–temporal relationships, and (ii) the determination of the P/T conditions and the fluid behaviour during deformation to achieve a better understanding of fluid–rock interaction in fault zones.We show that few of the observed structures can be attributed to an inherited shortening phase while the most abundant structures and fault rocks are related to extensional tectonics. The outcropping extensional patterns formed at depths less than 2.5–3 km, in a confined fluid system isolated from meteoric water, and the fault structures are the response to a small amount of cumulated displacement, 12–19% of the total geological throw.  相似文献   

18.
In this paper we determine the structure and evolution of a normal fault system by applying qualitative and quantitative fault analysis techniques to a 3D seismic reflection dataset from the Suez Rift, Egypt. Our analysis indicates that the October Fault Zone is composed of two fault systems that are locally decoupled across a salt-bearing interval of Late Miocene (Messinian) age. The sub-salt system offsets pre-rift crystalline basement, and was active during the Late Oligocene-early Middle Miocene. It is composed of four, planar, NW–SE-striking segments that are hard- linked by N–S-striking segments, and up to 2 km of displacement occurs at top basement, suggesting that this fault system nucleated at or, more likely, below this structural level. The supra-salt system was active during the Pliocene-Holocene, and is composed of four, NW–SE-striking, listric fault segments, which are soft-linked by unbreached relay zones. Segments in the supra-salt fault system nucleated within Pliocene strata and have maximum throws of up to 482 m. Locally, the segments of the supra-salt fault system breach the Messinian salt to hard-link downwards with the underlying, sub-salt fault system, thus forming the upper part of a fault zone composed of: (i) a single, amalgamated fault system below the salt and (ii) a fault system composed of multiple soft-linked segments above the salt. Analysis of throw-distance (T-x) and throw-depth (T-z) plots for the supra-salt fault system, isopach maps of the associated growth strata and backstripping of intervening relay zones indicates that these faults rapidly established their lengths during the early stages of their slip history. The fault tips were then effectively ‘pinned’ and the faults accumulated displacement via predominantly downward propagation. We interpret that the October Fault Zone had the following evolutionary trend; (i) growth of the sub-salt fault system during the Oligocene-to-early Middle Miocene; (ii) cessation of activity on the sub-salt fault system during the Middle Miocene-to-?Early Pliocene; (iii) stretching of the sub- and supra-salt intervals during Pliocene regional extension, which resulted in mild reactivation of the sub-salt fault system and nucleation of the segmented supra-salt fault system, which at this time was geometrically decoupled from the sub-salt fault system; and (iv) Pliocene-to-Holocene growth of the supra-salt fault system by downwards vertical tip line propagation, which resulted in downward breaching of the salt and dip-linkage with the sub-salt fault system. The structure of the October Fault Zone and the rapid establishment of supra-salt fault lengths are compatible with the predictions of the coherent fault model, although we note that individual segments in the supra-salt array grew in accordance with the isolated fault model. Our study thereby indicates that both coherent and isolated fault models may be applicable to the growth of kilometre-scale, basin-bounding faults. Furthermore, we highlight the role that fault reactivation and dip-linkage in mechanically layered sequences can play in controlling the three-dimensional geometry of normal faults.  相似文献   

19.
An 1800-m-deep borehole into the Nojima fault zone was drilled at Nojima-Hirabayashi, Japan, after the 1995 Hyogo-ken Nanbu (Kobe) earthquake. Three possible fracture zones were detected at depths of about 1140, 1300, and 1800 m. To assess these fracture zones in this recently active fault, we analyzed the distributions of fault rocks, minerals, and chemical elements in these zones. The central fault plane in the shallowest fracture zone was identified by foliated blue-gray gouge at a depth of 1140 m. The degree of fracturing was evidently greater in the hanging wall than in the footwall. Minerals detected in this zone were quartz, orthoclase, plagioclase, and biotite, as in the parent rock (granodiorite), and also kaolinite, smectite, laumontite, stilbite, calcite, ankerite, and siderite, which are related to hydrothermal alteration. Biotite was absent in both the hanging wall and footwall across the central fault plane, but it was absent over a greater distance from the central fault plane in the hanging wall than in the footwall. Major element compositions across this zone suggested that hydrothermal alteration minerals such as kaolinite and smectite occurred across the central fault plane for a greater distance in the hanging wall than in the footwall. Similarly, H2O+ and CO2 had higher concentrations in the hanging wall than in the footwall. This asymmetrical distribution pattern is probably due to the greater degree of wall–rock fracturing and associated alteration in the hanging wall. We attributed the characteristics of this zone to fault activity and fluid–rock interactions. We analyzed the other fracture zones along this fault in the same way. In the fracture zone at about 1300 m depth, we detected the same kinds of hydrothermal alteration minerals as in the shallower zone, but they were in fewer samples. We detected relatively little H2O+ and CO2, and little evidence for movement of the major chemical elements, indicating little past fluid–rock interaction. In the fracture zone at about 1800 m depth, H2O+ and CO2 were very enriched throughout the interval, as in the fracture zone at about 1140 m depth. However, smectite was absent and chlorite was present, indicating the occurrence of chloritization, which requires a temperature of more than 200 °C. Only smectite can form under the present conditions in these fracture zones. The chloritization probably occurred in the past when the fracture zone was deeper than it is now. These observations suggest that among the three fracture zones, that at about 1140 m depth was the most activated at the time of the 1995 Hyogo-ken Nanbu (Kobe) earthquake.  相似文献   

20.
Although reverse drag, the down warping of hanging wall strata toward a normal fault, is widely accepted as an indicator of listric fault geometry, previous studies have shown that similar folding may form in response to slip on faults of finite vertical extent with listric or planar geometry. In this study we therefore seek more general criteria for inferring subsurface fault geometry from observations of near-surface deformation by directly comparing patterns of displacement, stress, and strain around planar and listric faults, as predicted by elastic boundary element models. In agreement with previous work, we find that models with finite planar, planar-detached, and listric-detached faults all develop hanging wall reverse-drag folds. All of these model geometries also predict a region of tension and elevated maximum Coulomb stress in the hanging wall suggesting that the distribution and orientation of near-surface joints and secondary faults may also be of limited utility in predicting subsurface fault geometry. The most notable difference between the three models, however, is the magnitude of footwall uplift. Footwall uplift decreases slightly with introduction of a detachment and more significantly with the addition of a listric fault shape. A parametric investigation of faults with constant slip ranging from nearly planar to strongly listric over depths from 1 to 15 km reveals that footwall fold width is sensitive to fault geometry while hanging wall fold width largely reflects fault depth. Application of a graphical approach based on these results as well as more complete inverse modeling illustrates how patterns of combined hanging wall and footwall deformation may be used to constrain subsurface fault geometry.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号