首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 812 毫秒
1.
  相似文献   

2.
The thermochemistry of jarosite-alunite and natrojarosite-natroalunite solid solutions was investigated. Members of these series were either coprecipitated or synthesized hydrothermally and were characterized by XRD, FTIR, electron microprobe analysis, ICP-MS, and thermal analysis. Partial alkali substitution and vacancies on the Fe/Al sites were observed in all cases, and the solids studied can be described by the general formula K1-x-yNay(H3O)xFezAlw(SO4)2(OH)6-3(3-z-w)(H2O)3(3-z-w). A strong preferential incorporation of Fe over Al in the jarosite/alunite structure was observed. Heats of formation from the elements, ΔH°f, were determined by high-temperature oxide melt solution calorimetry. The solid solutions deviate slightly from thermodynamic ideality by exhibiting positive enthalpies of mixing in the range 0 to +11 kJ/mol. The heats of formation of the end members of both solid solutions were derived. The values ΔH°f = −3773.6 ± 9.4 kJ/mol, ΔH°f = −4912.2 ± 24.2 kJ/mol, ΔH°f = −3734.6 ± 9.7 kJ/mol and ΔH°f = −4979.7 ± 7.5kJ/mol were found for K0.85(H3O)0.15Fe2.5(SO4)2(OH)4.5(H2O)1.5, K0.85(H3O)0.15Al2.5(SO4)2(OH)4.5(H2O)1.5, Na0.7(H3O)0.3Fe2.7(SO4)2(OH)5.1(H2O)0.9, and Na0.7(H3O)0.3Al2.7(SO4)2(OH)5.1(H2O)0.9 respectively. To our knowledge, this is the first experimentally-based report of ΔH°f for such nonstoichiometric alunite and natroalunite samples. These thermodynamic data should prove helpful to study, under given conditions, the partitioning of Fe and Al between the solids and aqueous solution.  相似文献   

3.
Efflorescence, case hardening, and granular disintegration represent common weathering features of Upper Cretaceous quartz sandstones exposed in the Bohemian Switzerland National Park (NW Bohemia, Czech Republic). Salt species (sulphates: gypsum (CaSO4·2H2O), potassium alum (KAl(SO4)2·12H2O), tschermigite (NH4Al(SO4)2·12H2O), alunite (K(Al3(SO4)2(OH)6), and alunogen (Al2(SO4)3·17H2O), minor nitrates: nitrammite (NH4NO3)) determined by X-ray diffraction exhibit vertical and geographic zoning. More soluble salts (chlorides, nitrates, tschermigite) crystallize preferentially on the cliffs exposed to the south, whereas the north face is characterized by the presence of less soluble phases: gypsum and K(Al3(SO4)2(OH)6. Vertical zoning of salt distribution on natural outcrops differs from the salt distribution in masonry. Salt distribution near the base of the cliff (profile to about 2–2.5 m above the ground) is affected by capillary rise from the ground level (first maximum of water-soluble salts at the level of 1–1.5 m above the ground) and by percolation of precipitation through the overhanging rock sequence (second maximum of 2–2.5 m above the ground). Percolation of salt solution from higher parts is affected by the asperity of the rock surface. The concentration of salts (determined by ion exchange chromatography) correlates to the changes of physical properties: bulk porosity, microporosity and water absorption. The porosity, microporosity, moisture content and absorption generally increase with the increasing volume of sulphates and nitrates.  相似文献   

4.
Near-surface atmospheric dust in Changsha city of China was analyzed in terms of morphological and geochemical composition. Morphological and chemical composition of the dust particles were analyzed by environmental scanning electron microscopy coupled with an energy-dispersive X-ray analyzer. Results indicated that the atmospheric dusts were mainly composed of spherule, plate, irregularly shaped and agglomerate, which contains variable sizes and amounts of particles. The dust particles could be categorized into five groups based on their chemical characteristic: Al-, Si-, Ca-, C-rich particles and aggregate. These particles and aggregate could be directly related to nearby polluting activities, such as building construction, traffic emission and coal combustion. The X-ray diffraction results show that the main minerals for atmospheric dust are gypsum, quartz and calcite. Mica, halloysite, montmorillonite, hematite, brushite, zeolite, sepiolite, feldspar, alite, dickite, SiS2, Fe6(OH)2CO3, FeSO4, CdSO4, Pb(NO)2O3, Al2SO4(OH)4, As2O3SO3, (NH4)2SO4, NH4Cl, K(NH4)·Ca(SO4)2·H2O are also detected in samples. The identification of heavy metals shows that the concentrations of Cr (403.5?mg?kg?1), Cu (126?mg?kg?1), Zn (1541.5?mg?kg?1), Cd (2.5?mg?kg?1) and Pb (348?mg?kg?1) in the atmospheric dust are much higher compared to background value of soil. It indicates that the heavy metal (Cr, Cu, Zn, Cd and Pb) in the atmospheric dust is mainly due to human activities. The identification of main sources of atmospheric dust collected in typical areas can help to control the polluting sources in urban area.  相似文献   

5.
《Applied Geochemistry》2001,16(7-8):947-961
During dry season baseflow conditions approximately 20% of the flow in Boulder Creek is comprised of acidic metals-bearing groundwater. Significant amounts of efflorescent salts accumulate around intermittent seeps and surface streams as a result of evaporation of acid rock drainage. Those salts include the Fe-sulfates — rhomboclase ((H3O)Fe3+(SO4)2·3H2O), ferricopiapite (Fe3+5(SO4)6O(OH)·20H2O), and bilinite (Fe2+Fe23+(SO4)4·22H2O); Al-sulfates — alunogen (Al2(SO4)3·17H2O) and kalinite (KAl(SO4)2·11H2O); and Ca- and Mg-sulfates — gypsum (CaSO4·2H2O), and hexahydrite (MgSO4·6H2O). The dissolution of evaporative sulfate salt accumulations during the first major storm of the wet season at Iron Mountain produces a characteristic hydrogeochemical response (so-called “rinse-out”) in surface waters that is subdued in later storms. Geochemical modeling shows that the solutes from relatively minor amounts of dissolved sulfate salts will maintain the pH of surface streams near 3.0 during a rainstorm. On a weight basis, Fe-sulfate salts are capable of producing more acidity than Al- or Mg-sulfate salts. The primary mechanism for the production of acidity from salts involves the hydrolysis of the dissolved dissolved metals, especially Fe3+. In addition to the lowering of pH values and providing dissolved Fe and Al to surface streams, the soluble salts appear to be a significant source of dissolved Cu, Zn, and other metals during the first significant storm of the season.  相似文献   

6.
Gypsum (CaSO4·2H2O), alunite (KAl3(SO4)2(OH)6), and rare phosphate–sulphate sanjuanite Al2(PO4)(SO4)(OH) 9(H2O) and rossiantonite (Al3(PO4)(SO4) 2(OH)2(H2O)14) have recently been identified as secondary mineral deposits in different quartz‐sandstone caves in the Gran Sabana region, Venezuela. Due to the extended time scale required for speleogenesis in the hard and barely soluble quartz‐sandstone lithology, these caves are considered to be as old as 20 to 30 My. The study of these peculiar secondary mineral deposits potentially reveals important insights for understanding the interaction between deep, superficial and atmospheric processes over thousands to perhaps millions of years. In this study, chemical and petrographic analyses of potential host rock sources, sulphur and oxygen isotope ratios, and meteorological, hydrological and geographical data are used to investigate the origin of sulphates and phospho–sulphates. The results suggest that the deposition of sulphates in these caves is not linked to the quartz‐sandstone host rock. Rather, these mineral deposits originate from an external atmospheric sulphate source, with potential contributions of marine non‐sea salt sulphates, terrestrial dimethyl sulphide and microbially reduced H2S from the forests or peatbogs within the watershed. Air currents within the caves are the most plausible means of transport for aerosols, driving the accumulation of sulphates and other secondary minerals in specific locations. Moreover, the studied sulphate minerals often co‐occur with silica speleothems of biological origin. Although this association would suggest a possible biogenic origin for the sulphates as well, direct evidence proving that microbes are involved in their formation is absent. Nonetheless, this study demonstrates that these quartz‐sandstone caves accumulate and preserve allogenic sulphates, playing a yet unrecognized role in the sulphur cycle of tropical environments.  相似文献   

7.
The identification of the mineral species controlling the solubility of Al in acidic waters rich in sulfate has presented researchers with several challenges. One of the particular challenges is that the mineral species may be amorphous by X-ray diffraction. The difficulty in discerning between adsorbed or structural sulfate is a further complication. Numerous studies have employed theoretical calculations to determine the Al mineral species forming in acid sulfate soil environments. The vast majority of these studies indicate the formation of a mineral species matching the stoichiometry of jurbanite, Al(OH)SO4·5H2O. Much debate, however, exists as to the reality of jurbanite forming in natural environments, particularly in view of its apparent rare occurrence. In this work the use of Al, S and O K-edge XANES spectroscopy, in combination with elemental composition analyses of groundwater precipitates and a theoretical analysis of soluble Al concentrations ranging from pH 3.5 to 7, were employed to determine the mineral species controlling the solubility of Al draining from acid sulfate soils into Blacks Drain in north-eastern New South Wales, Australia. The results indicate that a mixture of amorphous Al hydroxide (Al(OH)3) and basaluminite (Al4(SO4)(OH)10·5H2O) was forming. The use of XANES spectroscopy is particularly useful as it provides insight into the nature of the bond between sulfate and Al, and confirms the presence of basaluminite. This counters the possibility that an Al hydroxide species, with appreciable amounts of adsorbed sulfate, is forming within these groundwaters.Below approximately pH 4.5, prior to precipitation of this amorphous Al(OH)3/basaluminite mixture, our studies indicate that the Al3+ activity of these acidic sulfate-rich waters is limited by the availability of dissolved Al from exchangeable and amorphous/poorly crystalline mineral species within adjacent soils. Further evidence suggests the Al3+ activity below pH 4.5 is then further controlled by dilution with either rainwater or pH 6-8 buffered estuarine water, and not a notional Al(OH)SO4 mineral species.  相似文献   

8.
Summary Recently several natural and artificial ferric iron sulphate crystal structures have been solved. Sideronatrite, Na2Fe3+(SO4)2(OH)·3H2O, does not provide good crystals for structural purposes. However if we examine crystallographic, chemical and physical data some useful information about the ...Fe–O–S... structural topology can be inferred. In fact this analysis strengthens the hypothesis that there is a {Fe 2 3+ (SO4)4(OH)2} chain in sideronatrite like that found in guildite, Cu2+Fe3+(SO4)2(OH)·4H2O.
Sideronatrit: Ein Mineral mit einer {Fe2(SO4)4(OH)2}-Kette vom Typ Guildit?
Zusammenfassung Kürzlich wurden die Kristallstrukturen mehrerer natürlicher und künstlicher Ferrisulfate gelöst. Sideronatrit, Na2Fe3+(SO4)2(OH)·3H2O, liefert keine für die Strukturuntersuchung gut geeigneten Kristalle. Dennoch erhält man aus der Untersuchung der kristallographischen, chemischen und physikalischen Daten nützliche Information über die ...Fe–O–S...-Topologie der Struktur. Eine solche Analyse spricht für die Hypothese, daß der Sideronatrit eine {Fe 2 3+ (SO4)4(OH2)}-Kette enthält, wie sie im Guildit, Cu2+Fe3+(SO4)2(OH)·4H2O, gefunden wurde.

With 1 Figure

Paper presented at the Sixth European Crystallographic Meeting. Barcelona, Spain 1980.  相似文献   

9.
Biachellaite, a new mineral species of the cancrinite group, has been found in a volcanic ejecta in the Biachella Valley, Sacrofano Caldera, Latium region, Italy, as colorless isometric hexagonal bipyramidal-pinacoidal crystals up to 1 cm in size overgrowing the walls of cavities in a rock sample composed of sanidine, diopside, andradite, leucite and hauyne. The mineral is brittle, with perfect cleavage parallel to {10$ \bar 1 $ \bar 1 0} and imperfect cleavage or parting (?) parallel to {0001}. The Mohs hardness is 5. Dmeas = 2.51(1) g/cm3 (by equilibration with heavy liquids). The densities calculated from single-crystal X-ray data and from X-ray powder data are 2.515 g/cm3 and 2.520 g/cm3, respectively. The IR spectrum demonstrates the presence of SO42−, H2O, and absence of CO32−. Biachellaite is uniaxial, positive, ω = 1.512(1), ɛ = 1.514(1). The weight loss on ignition (vacuum, 800°C, 1 h) is 1.6(1)%. The chemical composition determined by electron microprobe is as follows, wt %: 10.06 Na2O, 5.85 K2O, 12.13 CaO, 26.17 Al2O3, 31.46 SiO2, 12.71 SO3, 0.45 Cl, 1.6 H2O (by TG data), −0.10 −O=Cl2, total is 100.33. The empirical formula (Z = 15) is (Na3.76Ca2.50K1.44)Σ7.70(Si6.06Al5.94O24)(SO4)1.84Cl0.15(OH)0.43 · 0.81H2O. The simplified formula is as follows: (Na,Ca,K)8(Si6Al6O24)(SO4)2(OH)0.5 · H2O. Biachellaite is trigonal, space group P3, a =12.913(1), c = 79.605(5) ?; V = 11495(1) ?3. The crystal structure of biachellaite is characterized by the 30-layer stacking sequence (ABCABCACACBACBACBCACBACBACBABC)∞. The tetrahedral framework contains three types of channels composed of cages of four varieties: cancrinite, sodalite, bystrite (losod) and liottite. The strongest lines of the X-ray powder diffraction pattern [d, ? (I, %) (hkl)] are as follows: 11.07 (19) (100, 101), 6.45 (18) (110, 111), 3.720 (100) (2.1.10, 300, 301, 2.0.16, 302), 3.576 (18) (1.0.21, 2.0.17, 306), 3.300 (47) (1.0.23, 2.1.15), 3.220 (16) (2.1.16, 222). The type material of biachellaite has been deposited at the Fersman Mineralogical Museum of the Russian Academy of Sciences, Moscow, Russia, registration number 3642/1.  相似文献   

10.
Abstract Chemical analysis (including H2, F2, FeO, Fe2O3) of a Mg-vesuvianite from Georgetown, Calif., USA, yields a formula, Ca18.92Mg1.88Fe3+0.40Al10.97Si17.81- O69.0.1(OH)8.84F0.14, in good agreement on a cation basis with the analysis reported by Pabst (1936). X-ray and electron diffraction reveal sharp reflections violating the space group P4/nnc as consistent with domains having space groups P4/n and P4nc. Refinement of the average crystal structure in space group P4/nnc is consistent with occupancy of the A site with Al, of the half-occupied B site by 0.8 Mg and 0.2 Fe, of the half-occupied C site by Ca, of the Ca (1,2,3) sites by Ca, and the OH and O(10) sites by OH and O. We infer an idealized formula for Mg-vesuvianite to be Ca19Mg(MgAl7)Al4Si18O69(OH)9, which is related to Fe3+-vesuvianite by the substitutions Mg + OH = Fe3++ O in the B and O(10) sites and Fe3+= Al in the AlFe site. Thermodynamic calculations using this formula for Mg-vesuvianite are consistent with the phase equilibria of Hochella, Liou, Keskinen & Kim (1982) but inconsistent with those of Olesch (1978). Further work is needed in determining the composition and entropy of synthetic vs natural vesuvianite before quantitative phase equilibria can be dependably generated. A qualitative analysis of reactions in the system CaO-MgO-Al2O3-SiO2-H2O-CO2 shows that assemblages with Mg-vesuvianite are stable to high T in the absence of quartz and require water-rich conditions (XH2O > 0.8). In the presence of wollastonite, Mg-vesuvianite requires very water-rich conditions (XH2O > 0.97).  相似文献   

11.
Mangazeite, a new mineral species, has been found at the Mangazeya silver deposit (300 km east of the Lena River, 65°43′40″ N and 130°20′ E) in eastern Yakutia (Sakha Republic, Siberia, Russia). The new mineral was described from fractured, sericitized, and pyritized granodiorite adjacent to a quartz-arsenopyrite vein. Associated minerals are gypsum and chlorite. The new mineral occurs as radial fibrous segregations of thin lamellar crystals. The size of the fibers does not exceed 40 μm in length and 1 μm across. The mineral is white, with a white streak and a vitreous luster. Mangazeite is transparent in isolated grains. No fluorescence is observed. The Mohs hardness is 1–2. The calculated density is 2.15 g/cm3. The new mineral is biaxial; its optical character was not determined; α = 1.525(9), β was not measured, and γ = 1.545(9). The average chemical composition is as follows (wt %): Al2O3 36.28, SO3 28.81, H2O+ 34.35, total 99.44, H2O? 9.27. The H2O? content was neither included in the total nor used in formula calculation. The empirical formula is Al1.99(SO4)1.01(OH)3.94 · 3.37H2O. The simplified formula is Al2(SO4)(OH)4 · 3H2O. The theoretical chemical composition calculated from this formula is (wt %) Al2O3 37.47, SO3 29.42, H2O 33.11, total 100.00. The new mineral is triclinic; the unit cell parameters refined from X-ray powder diffraction data are a = 8.286(5), b = 9.385(5), c = 11.35(1) Å, α = 96.1(1), β = 98.9(1), γ = 96.6(1)°, and Z = 4. The strongest lines in the X-ray powder diffraction pattern (d(I, %)) are 8.14(19), 7.59(49), 7.16(46), 4.258(100), 4.060(48), and 3.912(43). Mangazeite is supergene in origin and crystallized in a favorable aluminosilicate environment in the presence of sulfate ion due to pyrite oxidation.  相似文献   

12.
Diagenetic alunite occurs with calcrete, gypcrete and silcrete deposits in a Mio-Pleistocene clastic sequence at several locations in southern Kuwait, Arabian Gulf. Based on their physical properties and textural characteristics the alunite deposits were divided into (1) chalky quartzitic alunite, (2) chalky quartz-free alunite, (3) hard pink alunitic sandstone. The chalky alunite is composed mainly of hydronium-alunite (H3O)Al3(SO4)2(OH)6, while the hard pink alunite is composed solely of well developed potassium alunite KAl3(SO4)2(OH)6. These minerals resulted from the action of sulphuric acid on clays and K-feldspars in the muddy sandstone and mudstone host sediments. The sulphuric acid is most probably produced by the oxidation of hydrogen sulphide that might have seeped in from the oil fields of this area. Four diagenetic stages are suggested for the genesis of the studied alunites: gypsification, sulphuratization, silicification and alunitization. In oil field areas, the occurrences of alunite would serve as an indicator for the presence at depth of hydrocarbons.  相似文献   

13.
Melt inclusions were studied in chrome diopside from the Inagli deposit of gemstones in the Inagli massif of alkaline ultrabasic rocks of potassic affinity in the northwestern Aldan shield, Yakutia, Russia. The chrome diopside is highly transparent and has an intense green color. Its Cr2O3 content varies from 0.13 to 0.75 wt %. Primary and primary-secondary polyphase inclusions in chrome diopside are dominated by crystal phases (80–90 vol %) and contain aqueous solution and a gas phase. Using electron microprobe analysis and Raman spectroscopy, the following crystalline phases were identified. Silicate minerals are represented by potassium feldspar, pectolite [NaCa2Si3O8(OH)], and phlogopite. The most abundant minerals in the majority of inclusions are sulfates: glaserite (aphthitalite) [K3Na(SO4)2], glauberite [Na2Ca(SO4)2], aluminum sulfate, anhydrite (CaSO4), gypsum (CaSO4 × 2H2O), barite (BaSO4), bloedite [Na2Mg(SO4)2 × 4H2O], thenardite (NaSO4), polyhalite [K2Ca2Mg(SO4)4 × 2H2O], arcanite (K2SO4), and celestite (SrSO4). In addition, apatite was detected in some inclusions. Chlorides are probably present among small crystalline phases, because some analyses of aggregates of silicate and sulfate minerals showed up to 0.19–10.3 wt % Cl. Hydrogen was identified in the gas phase of polyphase inclusions by Raman spectroscopy. The composition of melt from which the chrome diopside crystallized was calculated on the basis of the investigation of silicate melt inclusions. This melt contains 53.5 wt % SiO2, considerable amounts of CaO (16.3 wt %), K2O (7.9 wt %), Na2O (3.5 wt %), and SO3 (1.4 wt %) and moderate amounts of Al2O3 (7.5 wt %), MgO (5.8 wt %), FeO (1.1 wt %), and H2O (0.75 wt %). The content of Cr2O3 in the melt was 0.13 wt %. Many inclusions were homogenized at 770–850°C, when all of the crystals and the gas phase were dissolved. The material of inclusions heated up to the homogenization temperature became heterogeneous even during very fast quenching (two seconds) producing numerous small crystals. This fact implies that most of the inclusions contained a salt (rather than silicate) melt of sulfate-dominated composition. Such inclusions were formed from salt globules (with a density of about 2.5 g/cm3) occurring as an emulsion in the denser (2.6 g/cm3) silicate melt from which the chrome diopside crystallized.  相似文献   

14.
Summary The mineral fibroferrite has the chemical formula Fe(OH)SO4·xH2O; the value forx has not been definitely settled, but as a rule it is found to be near five. Several symmetries are given in the literature.A sample from Saint Felix de Paillères, France, proved to be rhombohedral with space group R3; lattice constants for the hexagonal cell area=24.176,c=7.656 Å. As calculated from the experimental density (=1.95 g·cm–3)Z=18 for this cell. Intensities were collected on an automated X-ray diffractometer from a thin fiber extended along [00.1]. The structure was determined by Patterson and Fourier methods. Least squares refinement with 818 observed reflections resulted inR=0.076.The structure contains hydroxo-bridged {Fe(OH)(H2O)2SO4} spiral chains built of [Fe(OH)2(H2O)2O2] octahedra and SO4 tetrahedra. Hydrogen bonds provide connections between these chains. The spiral chains are a stereoisomer variant of the hydroxo-bridged linear chains of Fe(OH)SO4, butlerite and parabutlerite. A comparison of these compounds is givenm to understand the relationship between the structure and their water content.
Fibroferrit: Ein Mineral mit einer {Fe(OH)(H2O)2SO4} Spiralkette und seine Beziehung zu Fe(OH)SO4, Butlerit und Parabutlerit
Zusammenfassung Das Mineral Fibroferrit hat die chemische Formel Fe(OH)SO4·xH2O; der Wert furx scheint nicht endgültig geklärt zu sein, liegt aber meist nahe 5. Verschiedene Symmetrien werden in der Literatur angegeben.Eine Probe von Saint Felix de Paillères, Frankreich, erwies sich als rhomboedrisch mit der Raumgruppe R3; die Gitterkonstanten der hexagonalen Zelle sinda=24,176,c=7,656 Å. Die experimentelle Bestimmung der Dichte (=1,95 g·cm–3) führt für diese Zelle zuZ=18. Von einer nach [00.1] gestreckten dünnen Faser wurden die Intensitäten auf einem automatischen Röntgendiffraktometer gesammelt. Die Struktur wurde mit Patterson-und Fouriersynthesen gelöst. Eine Verfeinerung nach der Methode der kleinsten Quadrate führte für 818 beobachtete Reflexe aufR=0,076.Die Struktur enthält durch Hydroxil-Gruppen verknüpfte {Fe(OH)(H2O)2SO4}-Spiralketten, die aus [Fe(OH)2(H2O)2O2]-Oktaedern und SO4-Tetraedern aufgebaut sind. Die Spiralketten von Fibroferrit sind eine stereoisomere Variante der annähernd linearen Fe–O–S-Ketten von Fe(OH)SO4, Butlerit und Parabutlerit. Diese Verbindungen werden mit Fibroferrit verglichen, um Beziehungen zwischen Struktur und Wassergehalt zu verstehen.

With 2 Figures

Paper presented at the Fifth European Crystallography Meeting, Copenhagen, Denmark 1979.  相似文献   

15.
《Chemical Geology》2006,225(3-4):256-265
SeO42− ions can substitute for sulphate in the gypsum structure. In this work crystals of different Ca(SO4,SeO4)·2H2O solid solutions were precipitated by mixing a CaCl2 solution with solutions containing different ratios of Na2SO4 and Na2SeO4. The compositions of the precipitates were analysed by EDS and the cell parameters were determined by X-ray powder diffraction. Moreover, a comparative study on dehydration behaviour of selenate rich and sulfate rich Ca(SO4,SeO4)·2H2O solid solutions was carried out by thermogravimetry.The experimental results show that the Ca(SO4,SeO4)·2H2O solid solution presents a symmetric miscibility gap for compositions ranging from XCaSO4·2H2O = 0.23 to XCaSO4·2H2O = 0.77. By considering a regular solution model a Guggenheim parameter a0 = 2.238 was calculated. The solid phase activity coefficients obtained with this parameter were used to calculate a Lippmann diagram for the system Ca(SO4,SeO4)·2H2O–H2O.  相似文献   

16.
Summary. ?Ca-tourmaline has been synthesized hydrothermally in the presence of Ca(OH)2 and CaCl2-bearing solutions of different concentration at T = 300–700 °C at a constant fluid pressure of 200 MPa in the system CaO-MgO-Al2O3-SiO2-B2O3-H2O-HCl. Synthesis of tourmaline was possible at 400 °C, but only above 500 °C considerable amounts of tourmaline formed. Electron microprobe analysis and X-ray powder data indicate that the synthetic tourmalines are essentially solid solutions between oxy-uvite, CaMg3- Al6(Si6O18)(BO3)3(OH)3O, and oxy-Mg-foitite, □(MgAl2)Al6(Si6O18)(BO3)3(OH)3O. The amount of Ca ranges from 0.36 to 0.88 Ca pfu and increases with synthesis temperature as well as with bulk Ca-concentration in the starting mixture. No hydroxy-uvite, CaMg3(MgAl5)(Si6O18)(BO3)3(OH)3(OH), could be synthesized. All tourmalines have < 3 Mg and > 6 Al pfu. The Al/(Al + Mg)-ratio decreases from 0.80 to 0.70 with increasing Ca content. Al is coupled with Mg and Ca via the substitutions Al2□Mg−2Ca−1 and AlMg−1H−1. No single phase tourmaline could be synthesized. Anorthite ( + quartz in most runs) has been found coexisting with tourmaline. Other phases are chlorite, tremolite, enstatite or cordierite. Between solid and fluid, Ca is strongly fractionated into tourmaline ( + anorthite). The concentration ratio D = Ca(fluid)/Ca(tur) increases from 0.20 at 500 °C up to 0.31 at 700 °C. For the assemblage turmaline + anorthite + quartz + chlorite or tremolite or cordierite, the relationship between Ca content in tourmaline and in fluid with temperature can be described by the equation (whereby T = temperature in °C, Ca(tur) = amount of Ca on the X-site in tourmaline, Ca( fluid) = concentration of Ca2+ in the fluid in mol/l). The investigations may serve as a first guideline to evaluate the possibility to use tourmaline as an indicator for the fluid composition.
Zusammenfassung. ?Synthese von Ca-Turmelin im System CaO-MgO-Al 2 O 3 -SiO 2 -B 2 O 3 -H 2 O-HCl Im System CaO-MgO-Al2O3-SiO2-B2O3-H2O-HCl wurde Ca-Turmalin hydrothermal aus Ca(OH)2 and CaCl2-haltigen L?sungen bei T = 300–700 °C und einem konstanten Fluiddruck von 200 MPa synthetisiert. Die Synthese von Turmalin war m?glich ab 400 °C, aber nur oberhalb von 500 °C bildeten sich deutliche Mengen an Turmalin. Elektronenstrahl-Mikrosondenanalysen und R?ntgenpulveraufnahmen zeigen, da? Mischkristalle der Reihe Oxy-Uvit, CaMg3Al6(Si6O18)(BO3)3(OH)3O, und Oxy-Mg-Foitit, □(MgAl2)Al6(Si6O18)(BO3)3(OH)3O gebildet wurden. Der Anteil an Ca variiert zwischen 0.36 und 0.88 Ca pfu und nimmt mit zunehmender Synthesetemperatur und zunehmender Ca-Konzentration im System zu. Hydroxy-Uvit, CaMg3(MgAl5) (Si6O18)(BO3)3(OH)3(OH), konnte nicht synthetisiert werden. Alle Turmaline haben < 3 Mg und > 6 Al pfu. Dabei nimmt das Al/(Al + Mg)- Verh?ltnis mit zunehmendem Ca-Gehalt von 0.80 auf 0.70 ab. Al ist gekoppelt mit Mg und Ca über die Substitutionen Al2□Mg−2Ca−1 und AlMg−1H−1. Einphasiger Turmalin konnte nicht synthetisiert werden. Anorthit (+ Quarz in den meisten F?llen) koexistiert mit Turmalin. Andere Phasen sind Chlorit, Tremolit, Enstatit oder Cordierit. Ca zeigt eine deutliche Fraktionierung in den Festk?rpern Turmalin (+ Anorthit). Das Konzentrationsverh?ltnis D = Ca(fluid)/Ca(tur) nimmt von 0.20 bei 500 °C auf 0.31 bei 700 °C zu. Für die Paragenese Turmalin + Anorthit + Quarz mit Chlorit oder Tremolit oder Cordierit gilt folgende Beziehung zwischen Ca-Gehalt in Turmalin und Fluid und der Temperatur: (wobei T = Temperatur in °C, Ca(tur) = Anteil an Ca auf der X-Position in Turmalin, Ca(fluid) = Konzentration von Ca2+ im Fluid in mol/l). Die Untersuchungen dienen zur ersten Absch?tzung, ob Turmalin als Fluidindikator petrologisch nutzbar ist.

Received July 24, 1998;/revised version accepted October 21, 1999  相似文献   

17.
A detailed study of the chemical composition and substitutions in calcium tourmalines from a scapolite-bearing rare-metal pegmatite vein from the Sol’bel’der River basin has shown that their species attribution is determined by occupancy of octahedral site Y. The composition of the yellow tourmaline most abundant in the central part of the pegmatite bodyis rather constant and characterized by the ideal formula Ca(Mg2Li)Al6(Si6O18)(BO3)3(OH)3F. Variations in the chemical composition of zonal tourmaline crystals from the contact part of the pegmatite are controlled by abrupt change in the chemical medium during their formation. The yellow cores of these crystals are close in composition to tourmaline from the central part of the pegmatite vein. The Mg content abruptly decreases toward the crystal margin: Mg2+ → Fe2+, 2Mg2+ → Li+ + Al3+, and Mg2+ + OH → Al3+ + O2−. The composition of dark green marginal zones in tourmaline is characterized by the ideal formula Ca(Al1.5Li1.5)Al6(Si6O18)(BO3)3 (OH2O)(F). The results indicate specific formation conditions of pegmatite. The crystallochemical formulas of the studied tourmalines allow us to regard them as new mineral species in the tourmaline group.  相似文献   

18.
Using single-crystal X-ray diffraction at 293, 200 and 100 K, and neutron diffraction at 50 K, we have refined the positions of all atoms, including hydrogen atoms (previously undetermined), in the structure of coquimbite ( $ P {\bar 3}1c $ , a?=?10.924(2)/10.882(2) Å, c?=?17.086(3) / 17.154(3) Å, V?=?1765.8(3)/1759.2(5) Å3, at 293 / 50 K, respectively). The use of neutron diffraction allowed us to determine precise and accurate hydrogen positions. The O–H distances in coquimbite at 50 K vary between 0.98 and 1.01 Å. In addition to H2O molecules coordinated to the Al3+ and Fe3+ ions, there are rings of six “free” H2O molecules in the coquimbite structure. These rings can be visualized as flattened octahedra with the distance between oxygen and the geometric center of the polyhedron of 2.46 Å. The hydrogen-bonding scheme undergoes no changes with decreasing temperature and the unit cell shrinks linearly from 293 to 100 K. A review of the available data on coquimbite and its “dimorph” paracoquimbite indicates that paracoquimbite may form in phases closer to the nominal composition of Fe2(SO4)3·9H2O. Coquimbite, on the other hand, has a composition approximating Fe1.5Al0.5(SO4)3·9H2O. Hence, even a “simple” sulfate Fe2-x Al x (SO4)3·9H2O may be structurally rather complex.  相似文献   

19.
《Applied Geochemistry》1998,13(5):643-650
Minerals coating brass ammunition shells that rested at the bottom of Halifax Harbour, Nova Scotia, for 52 a have been identified by X-ray diffraction and analytical scanning electron microscopy. The admiralty brass shells, partially buried in anoxic muds, straddle a strong Eh gradient ranging from 0 mV to values characteristic of oxygenated seawater. Whereas the brass surface in contact with the sediment has been preserved, parts of the shells exposed to seawater have corroded throughout their thickness. The corrosion products identified include metallic Cu, djurleite (Cu1.96S), cuprite (Cu2O), atacamite (Cu2Cl(OH)3), spertiniite (Cu(OH)2) and hydrozincite (Zn5(CO3)2(OH)6). These products are those predicted thermodynamically on the basis of ambient Eh and pH. However, this study also revealed the presence of a mineral not previously known to exist and tentatively identified as Cu14Zn14Cl5(SO4)5(OH)41.H2O. This “new” mineral seems to have a stability field in Eh–pH diagrams similar to that of connellite (Cu19Cl4SO4(OH)32.2H2O).  相似文献   

20.
While gibbsite and kaolinite solubilities usually regulate aluminum concentrations in natural waters, the presence of sulfate can dramatically alter these solubilities under acidic conditions, where other, less soluble minerals can control the aqueous geochemistry of aluminum. The likely candidates include alunogen, Al2(SO4)3 · 17H2O, alunite, KAl3(SO4)2(OH)6, jurbanite, Al(SO4)(OH) · 5H2O, and basaluminite, Al4(SO4)(OH)10 · 5H2O. An examination of literature values shows that the log Ksp = ?85.4 for alunite and log Ksp = ?117.7 for basaluminite. In this report the log Ksp = ?7.0 is estimated for alunogen and log Ksp = ?17.8 is estimated for jurbanite. The solubility and stability relations among these four minerals and gibbsite are plotted as a function of pH and sulfate activity at 298 K. Alunogen is stable only at pH values too low for any natural waters (<0) and probably only forms as efflorescences from capillary films. Jurbanite is stable from pH < 0 up to the range of 3–5 depending on sulfate activity. Alunite is stable at higher pH values than jurbanite, up to 4–7 depending on sulfate activity. Above these pH limits gibbsite is the most stable phase. Basaluminite, although kinetically favored to precipitate, is metastable for all values of pH and sulfate activity. These equilibrium calculations predict that both sulfate and aluminum can be immobilized in acid waters by the precipitation of aluminum hydroxysulfate minerals.Considerable evidence supports the conclusion that the formation of insoluble aluminum hydroxy-sulfate minerals may be the cause of sulfate retention in soils and sediments, as suggested by Adams and Rawajfih (1977), instead of adsorption.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号