共查询到20条相似文献，搜索用时 62 毫秒
1.
Previously we have detailed an application of the generalized likelihood uncertainty estimation (GLUE) procedure to estimate spatially distributed uncertainty in models conditioned against binary pattern data contained in flood inundation maps. This method was applied to two sites where a single consistent synoptic image of inundation extent was available to test the simulation performance of the method. In this paper, we extend this to examine the predictive performance of the method for a reach of the River Severn, west‐central England. Uniquely for this reach, consistent inundation images of two major floods have been acquired from spaceborne synthetic aperture radars, as well as a high‐resolution digital elevation model derived using laser altimetry. These data thus allow rigorous split sample testing of the previous GLUE application. To achieve this, Monte Carlo analyses of parameter uncertainty within the GLUE framework are conducted for a typical hydraulic model applied to each flood event. The best 10% of parameter sets identified in each analysis are then used to map uncertainty in flood extent predictions using the method previously proposed for both an independent validation data set and a design flood. Finally, methods for combining the likelihood information derived from each Monte Carlo ensemble are examined to determine whether this has the potential to reduce uncertainty in spatially distributed measures of flood risk for a design flood. The results show that for this reach and these events, the method previously established is able to produce sharply defined flood risk maps that compare well with observed inundation extent. More generally, we show that even single, poor‐quality inundation extent images are useful in constraining hydraulic model calibrations and that values of effective friction parameters are broadly stationary between the two events simulated, most probably reflecting their similar hydraulics. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
2.
An event simulation approach to the assessment of flood level frequencies: risk maps for the Warsaw reach of the River Vistula 
下载免费PDF全文
下载免费PDF全文 Flood risk assessment is customarily performed using a design flood. Observed past flows are used to derive a flood frequency curve which forms the basis for a construction of a design flood. The simulation of a distributed model with the 1‐in‐T year design flood as an input gives information on the possible inundation areas, which are used to derive flood risk maps. The procedure is usually performed in a deterministic fashion, and its extension to take into account the design flood‐and flow routing model uncertainties is computer time consuming. In this study we propose a different approach to flood risk assessment which consists of the direct simulation of a distributed flow routing model for an observed series of annual maximum flows and the derivation of maps of probability of inundation of the desired return period directly from the obtained simulations of water levels at the model cross sections through an application of the Flood Level Frequency Analysis. The hydraulic model and water level quantile uncertainties are jointly taken into account in the flood risk uncertainty evaluation using the Generalized Likelihood Uncertainty Estimation (GLUE) approach. An additional advantage of the proposed approach lies in smaller uncertainty of inundation predictions for long return periods compared to the standard approach. The approach is illustrated using a design flood level and a steady‐state solution of a hydraulic model to derive maps of inundation probabilities. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
3.
Uncertainty analysis of flood inundation modelling using GLUE with surrogate models in stochastic sampling 总被引：1，自引：0，他引：1 下载免费PDF全文
下载免费PDF全文 A generalized likelihood uncertainty estimation (GLUE) method incorporating moving least squares (MLS) with entropy for stochastic sampling (denoted as GLUE‐MLS‐E) was proposed for uncertainty analysis of flood inundation modelling. The MLS with entropy (MLS‐E) was established according to the pairs of parameters/likelihoods generated from a limited number of direct model executions. It was then applied to approximate the model evaluation to facilitate the target sample acceptance of GLUE during the Monte‐Carlo‐based stochastic simulation process. The results from a case study showed that the proposed GLUE‐MLS‐E method had a comparable performance as GLUE in terms of posterior parameter estimation and predicted confidence intervals; however, it could significantly reduce the computational cost. A comparison to other surrogate models, including MLS, quadratic response surface and artificial neural networks (ANN), revealed that the MLS‐E outperformed others in light of both the predicted confidence interval and the most likely value of water depths. ANN was shown to be a viable alternative, which performed slightly poorer than MLS‐E. The proposed surrogate method in stochastic sampling is of practical significance in computationally expensive problems like flood risk analysis, real‐time forecasting, and simulation‐based engineering design, and has a general applicability in many other numerical simulation fields that requires extensive efforts in uncertainty assessment. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
4.
The performance of two modelling approaches for predicting floodplain inundation is tested using observed flood extent and 26 distributed floodplain level observations for the 1997 flood event in the town of Usti nad Orlici in the Czech Republic. Although the one‐dimensional hydrodynamic model and the integrated one‐ and two‐dimensional model are shown to perform comparably against the flood extent data, the latter shows better performance against the distributed level observations. Comparable performance in predicting the extent of inundation is found to be primarily as a result of the urban reach considered, with flood extent constrained by road and railway embankments. Uncertainty in the elevation model used in both approaches is shown to have little effect on the reliability in predicting flood extent, with a greater impact on the ability in predicting the distributed level observations. These results show that reliability of flood inundation modelling in urban reaches, where flood risk assessment is of more interest than in more rural reaches, can be improved greatly if distributed observations of levels in the floodplain are used in constraining model uncertainties. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
5.
Remotely sensed land cover was used to generate spatially‐distributed friction coefficients for use in a two‐dimensional model of flood inundation. Such models are at the forefront of research into the prediction of river flooding. Standard practice, however, is to use single (static) friction coefficients on both the channel and floodplain, which are varied in a calibration procedure to provide a “best fit” to a known inundation extent. Spatially‐distributed friction provides a physically grounded estimate of friction that does not require fitting to a known inundation extent, but which can be fitted if desired. Remote sensing offers the opportunity to map these friction coefficients relatively straightforwardly and for low cost. Inundation was predicted using the LISFLOOD‐FP model for a reach on the River Nene, UK. Friction coefficients were produced from land cover predicted from Landsat TM imagery using both ML and fuzzy c‐means classifiction. The elevetion data used were from combined contour and differential global positioning system (GPS) elevation data. Predicted inundation using spatially‐distributed and static friction were compared. Spatially‐distributed friction had the greatest effect on the timing of flood inundation, but a small effect on predicted inundation extent. The results indicate that spatially‐distributed friction should be considered where the timing of initial flooding (e.g. for early warning) is important. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
6.
Parameter uncertainty in hydrologic modeling is crucial to the flood simulation and forecasting. The Bayesian approach allows one to estimate parameters according to prior expert knowledge as well as observational data about model parameter values. This study assesses the performance of two popular uncertainty analysis (UA) techniques, i.e., generalized likelihood uncertainty estimation (GLUE) and Bayesian method implemented with the Markov chain Monte Carlo sampling algorithm, in evaluating model parameter uncertainty in flood simulations. These two methods were applied to the semi-distributed Topographic hydrologic model (TOPMODEL) that includes five parameters. A case study was carried out for a small humid catchment in the southeastern China. The performance assessment of the GLUE and Bayesian methods were conducted with advanced tools suited for probabilistic simulations of continuous variables such as streamflow. Graphical tools and scalar metrics were used to test several attributes of the simulation quality of selected flood events: deterministic accuracy and the accuracy of 95 % prediction probability uncertainty band (95PPU). Sensitivity analysis was conducted to identify sensitive parameters that largely affect the model output results. Subsequently, the GLUE and Bayesian methods were used to analyze the uncertainty of sensitive parameters and further to produce their posterior distributions. Based on their posterior parameter samples, TOPMODEL’s simulations and the corresponding UA results were conducted. Results show that the form of exponential decline in conductivity and the overland flow routing velocity were sensitive parameters in TOPMODEL in our case. Small changes in these two parameters would lead to large differences in flood simulation results. Results also suggest that, for both UA techniques, most of streamflow observations were bracketed by 95PPU with the containing ratio value larger than 80 %. In comparison, GLUE gave narrower prediction uncertainty bands than the Bayesian method. It was found that the mode estimates of parameter posterior distributions are suitable to result in better performance of deterministic outputs than the 50 % percentiles for both the GLUE and Bayesian analyses. In addition, the simulation results calibrated with Rosenbrock optimization algorithm show a better agreement with the observations than the UA’s 50 % percentiles but slightly worse than the hydrographs from the mode estimates. The results clearly emphasize the importance of using model uncertainty diagnostic approaches in flood simulations. 相似文献
7.
AbstractA generalized likelihood uncertainty estimation (GLUE) framework coupling with artificial neural network (ANN) models in two surrogate schemes (i.e. GAE-S1 and GAE-S2) was proposed to improve the efficiency of uncertainty assessment in flood inundation modelling. The GAE-S1 scheme was to construct an ANN to approximate the relationship between model likelihoods and uncertain parameters for facilitating sample acceptance/rejection instead of running the numerical model directly; thus, it could speed up the Monte Carlo simulation in stochastic sampling. The GAE-S2 scheme was to establish independent ANN models for water depth predictions to emulate the numerical models; it could facilitate efficient uncertainty analysis without additional model runs for locations concerned under various scenarios. The results from a study case showed that both GAE-S1 and GAE-S2 had comparable performances to GLUE in terms of estimation of posterior parameters, prediction intervals of water depth, and probabilistic inundation maps, but with reduced computational requirements. The results also revealed that GAE-S1 possessed a slightly better performance in accuracy (referencing to GLUE) than GAE-S2, but a lower flexibility in application. This study shed some light on how to apply different surrogate schemes in using numerical models for uncertainty assessment, and could help decision makers in choosing cost-effective ways of conducting flood risk analysis. 相似文献
8.
It is the goal of remote sensing to infer information about objects or a natural process from a remote location. This invokes that uncertainty in measurement should be viewed as central to remote sensing. In this study, the uncertainty associated with water stages derived from a single SAR image for the Alzette (G.D. of Luxembourg) 2003 flood is assessed using a stepped GLUE procedure. Main uncertain input factors to the SAR processing chain for estimating water stages include geolocation accuracy, spatial filter window size, image thresholding value, DEM vertical precision and the number of river cross sections at which water stages are estimated. Initial results show that even with plausible parameter values uncertainty in water stages over the entire river reach is 2.8 m on average. Adding spatially distributed field water stages to the GLUE analysis following a one-at-a-time approach helps to considerably reduce SAR water stage uncertainty (0.6 m on average) thereby identifying appropriate value ranges for each uncertain SAR water stage processing factor. For the GLUE analysis a Nash-like efficiency criterion adapted to spatial data is proposed whereby acceptable SAR model simulations are required to outperform a simpler regression model based on the field-surveyed average river bed gradient. Weighted CDFs for all factors based on the proposed efficiency criterion allow the generation of reliable uncertainty quantile ranges and 2D maps that show the uncertainty associated with SAR-derived water stages. The stepped GLUE procedure demonstrated that not all field data collected are necessary to achieve maximum constraining. A possible efficient way to decide on relevant locations at which to sample in the field is proposed. It is also suggested that the resulting uncertainty ranges and flood extent or depth maps may be used to evaluate 1D or 2D flood inundation models in terms of water stages, depths or extents. For this, the extended GLUE approach, which copes with the presence of uncertainty in the observed data, may be adopted. 相似文献
9.
Deterministic flood inundation mapping is valuable for the investigation of detailed flood depth and extent. However, when these data are used for real‐time flood warning, uncertainty arises while encountering the difficulties of timely response, message interpretation and performance evaluation that makes statistical analysis necessary. By incorporating deterministic flood inundation map outputs statistically by means of logistic regression, this paper presents a probabilistic real‐time flood warning model determining region‐based flood probability directly from rainfall, being efficient in computation, clear in message, and valid in physical meaning. The calibration and validation of the probabilistic model show a satisfactory overall correctness rate, with the hit rate far surpassing the false alarm rate in issuing flood warning for historical events. Further analyses show that the probabilistic model is effective in evaluating the level of uncertainty lying within flood warning which can be reduced by several techniques proposed in order to improve warning performance. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
10.
The use of spatial patterns of flood inundation (often obtained from remotely sensed imagery) to calibrate flood inundation models has been widespread over the last 15 years. Model calibration is most often achieved by employing one or even several performance measures derived from the well‐known confusion matrix based on a binary classification of flooding. However, relatively early on, it has been recognized that the use of commonly reported performance measures for calibrating flood inundation models (such as the F measure) is hampered because the calibration procedure commonly utilizes only one possible solution of a wet/dry classification of a remote sensing image [most often acquired by a synthetic aperture radar (SAR)] to calibrate or validate models and are biased towards either over‐prediction or under‐prediction of flooding. Despite the call in several studies for an alternative statistic, to this date, very few, if any, unbiased performance measure based on the confusion matrix has been proposed for flood model calibration/validation studies. In this paper, we employ a robust statistical measure that operates in the receiver operating characteristics (ROC) space and allows automated model calibration with high identifiability of the best model parameter set but without the need of a classification of the SAR image. The ROC‐based method for flood model calibration is demonstrated using two different flood event test cases with flood models of varying degree of complexity and boundary conditions with varying degree of accuracy. Verification of the calibration results and optional SAR classification is successfully performed with independent observations of the events. We believe that this proposed alternative approach to flood model calibration using spatial patterns of flood inundation should be employed instead of performance measures commonly used in conjunction with a binary flood map. © 2013 California Institute of Technology. Hydrological Processes © 2013 John Wiley & Sons, Ltd. 相似文献
11.
Assessment of the SWMM model uncertainties within the generalized likelihood uncertainty estimation (GLUE) framework for a high‐resolution urban sewershed 下载免费PDF全文
下载免费PDF全文 This research incorporates the generalized likelihood uncertainty estimation (GLUE) methodology in a high‐resolution Environmental Protection Agency Storm Water Management Model (SWMM), which we developed for a highly urbanized sewershed in Syracuse, NY, to assess SWMM modelling uncertainties and estimate parameters. We addressed two issues that have long been suggested having a great impact on the GLUE uncertainty estimation: the observations used to construct the likelihood measure and the sampling approach to obtain the posterior samples of the input parameters and prediction bounds of the model output. First, on the basis of the Bayes' theorem, we compared the prediction bounds generated from the same Gaussian distribution likelihood measure conditioned on flow observations of varying magnitude. Second, we employed two sampling techniques, the sampling importance resampling (SIR) and the threshold sampling methods, to generate posterior parameter distributions and prediction bounds, based on which the sampling efficiency was compared. In addition, for a better understanding of the hydrological responses of different pervious land covers in urban areas, we developed new parameter sets in SWMM representing the hydrological properties of trees and lawns, which were estimated through the GLUE procedure. The results showed that SIR was a more effective alternative to the conventional threshold sampling method. The combined total flow and peak flow data were an efficient alternative to the intensive 5‐min flow data for reducing SWMM parameter and output uncertainties. Several runoff control parameters were found to have a great effect on peak flows, including the newly introduced parameters for trees. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
12.
A fast simplified model for predicting river flood inundation probabilities in poorly gauged areas 下载免费PDF全文
下载免费PDF全文 The capability of a simple kinematic‐storage model (KSM) is analysed to be used as a tool for a Decision Support System for the evaluation of probability inundation maps in near real time in poorly gauged areas. KSM simulates the floodplain as a storage and assumes no exchange of momentum with the channel. For the in‐bank flow, the storage is modified through a coefficient for taking the variations of channel cross sections into account. The generalized likelihood uncertainty estimation approach is used for addressing the probability flood maps along with their associated uncertainties. The model is tested on two river reaches along the Tiber River in Central Italy where observed inundation maps are available for two recent flood events. Despite the inherent uncertainties present in the input data and in the model structure, the results show that the model reproduces reasonably well, in terms of both precision and accuracy, the observed inundated areas. Tests were performed at different digital elevation model resolutions, showing a small effect of the geometry on the maximum performance obtained. The very low computational times, the parsimony of the model and its low sensitivity to the quality of the geometry representation of the channel and the floodplain makes KSM very appealing for flood forecasting and early warning system applications in poorly gauged and inaccessible areas. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
13.
A method to reduce the computational requirement while assessing uncertainty of complex hydrological models 总被引：1，自引：1，他引：0
P. Athira K. P. Sudheer 《Stochastic Environmental Research and Risk Assessment (SERRA)》2015,29(3):847-859
The quantification of uncertainty in the simulations from complex physically based distributed hydrologic models is important for developing reliable applications. The generalized likelihood uncertainty estimation method (GLUE) is one of the most commonly used methods in the field of hydrology. The GLUE helps reduce the parametric uncertainty by deriving the probability distribution function of parameters, and help analyze the uncertainty in model output. In the GLUE, the uncertainty of model output is analyzed through Monte Carlo simulations, which require large number of model runs. This induces high computational demand for the GLUE to characterize multi-dimensional parameter space, especially in the case of complex hydrologic models with large number of parameters. While there are a lot of variants of GLUE that derive the probability distribution of parameters, none of them have addressed the computational requirement in the analysis. A method to reduce such computational requirement for GLUE is proposed in this study. It is envisaged that conditional sampling, while generating ensembles for the GLUE, can help reduce the number of model simulations. The mutual relationship between the parameters was used for conditional sampling in this study. The method is illustrated using a case study of Soil and Water Assessment Tool (SWAT) model on a watershed in the USA. The number of simulations required for the uncertainty analysis was reduced by 90 % in the proposed method compared to existing methods. The proposed method also resulted in an uncertainty reduction in terms of reduced average band width and high containing ratio. 相似文献
14.
Osvaldo Salazar Abraham Joel Ingrid Wesström Harry Linnér R. Wayne Skaggs 《水文研究》2010,24(26):3837-3851
The field hydrology model DRAINMOD integrated with Arc Hydro in geographical information system (GIS) framework (Arc Hydro–DRAINMOD) was used to simulate the hydrological response of a coastal watershed in southeast Sweden. Arc Hydro–DRAINMOD uses a distributed approach to route water from each field edge to the watershed outlet. In the framework the Arc Hydro data model was used to describe the stream network in the watershed and to connect the individual simulated DRAINMOD‐field outflow time series from each plot using Arc Hydro schema‐links features, which were summed at Arc Hydro schema‐nodes features along the stream network to generate the stream network flow. Hydrology data collected during six periods between 2003 and 2008 were used to test Arc Hydro–DRAINMOD and its performance was evaluated by considering uncertainties in model inputs using generalized likelihood uncertainty estimation (GLUE). The GLUE estimates obtained (uncertainty bands 5% and 95%) agreed satisfactorily with measured monthly discharges. The percentage of time in which the observed discharges were bracketed by the uncertainty bands was 88% in calibration periods and 75% in validation periods. Although monthly time step simulations showed good agreement with observed discharges during the two main discharge events in spring, the contradictory daily time step results indicate that the watershed response simulations on a daily basis need to be improved. The uncertainty analysis showed that in periods of higher discharge, such as spring periods, the uncertainty in prediction was higher. It is important to note that these uncertainty estimations using the GLUE procedure include the uncertainties in measured discharge values, model inputs, boundary conditions and model structures. It was estimated that stream baseflow represented 42% of the total watershed discharge, but further research is needed to confirm this. These results show that the new Arc Hydro–DRAINMOD framework is applicable for predicting discharge from artificially drained watersheds in southeast Sweden. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
15.
Including prior information in the estimation of effective soil parameters in unsaturated zone modelling 总被引：2，自引：0，他引：2
In this paper we propose a methodology to include prior information in the estimation of effective soil parameters for modelling the soil moisture content in the unsaturated zone. Laboratory measurements on undisturbed soil cores were used to estimate the moisture retention curve and hydraulic conductivity curve parameters. The soil moisture content was measured at 25 locations along three transects and at three different depths (surface, 30 and 60 cm) on an 80×20 m hillslope for the year 2001. Soil cores were collected in 84 locations situated in three profile pits along the hillslope. For the estimation of the effective soil hydraulic parameters the joint probability distribution of measured parameter values was used as prior information. A two-horizon single column 1D MIKE SHE model based on Richards' equation was set-up for nine soil moisture measurement locations along the middle transect of the hillslope. The goal of the model is to simulate the soil moisture profile at each location. The shuffled complex evolution (SCE) algorithm has been applied to estimate effective model parameters using either wide parameter ranges, referred to as the ‘no-prior’ case, or the joint probability distribution of measured parameter values as prior information (‘prior’ case). When the prior information is incorporated in the SCE optimisation the goodness-of-fit of the model predictions is only slightly worse compared to when no-prior information is incorporated. However, the effective parameter estimates are more realistic when the prior information is incorporated. For both the no-prior and prior case the generalised likelihood uncertainty estimation procedure (GLUE) was subsequently used to estimate the uncertainty bounds (UB) on the model predictions. When incorporating the prior information more parameter sets were accepted for the estimation of the predictive uncertainty and the parameter values were more realistic. Moreover, UB better enclosed the observations. Thus, incorporating prior information in GLUE reduces the amount of model evaluations needed to obtain sufficient behavioural parameter sets. The results indicate the importance of prior information in the SCE and GLUE parameter estimation strategies. 相似文献
16.
Estimation of uncertainty propagation in flood inundation mapping using a 1‐D hydraulic model 下载免费PDF全文
下载免费PDF全文 A need for more accurate flood inundation maps has recently arisen because of the increasing frequency and extremity of flood events. The accuracy of flood inundation maps is determined by the uncertainty propagated from all of the variables involved in the overall process of flood inundation modelling. Despite our advanced understanding of flood progression, it is impossible to eliminate the uncertainty because of the constraints involving cost, time, knowledge, and technology. Nevertheless, uncertainty analysis in flood inundation mapping can provide useful information for flood risk management. The twin objectives of this study were firstly to estimate the propagated uncertainty rates of key variables in flood inundation mapping by using the first‐order approximation method and secondly to evaluate the relative sensitivities of the model variables by using the Hornberger–Spear–Young (HSY) method. Monte Carlo simulations using the Hydrologic Engineering Center's River Analysis System and triangle‐based interpolation were performed to investigate the uncertainty arising from discharge, topography, and Manning's n in the East Fork of the White River near Seymour, Indiana, and in Strouds Creek in Orange County, North Carolina. We found that the uncertainty of a single variable is propagated differently to the flood inundation area depending on the effects of other variables in the overall process. The uncertainty was linearly/nonlinearly propagated corresponding to valley shapes of the reaches. In addition, the HSY sensitivity analysis revealed the topography of Seymour reach and the discharge of Strouds Creek to be major contributors to the change of flood inundation area. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
17.
An ability to quantify the reliability of probabilistic flood inundation predictions is a requirement not only for guiding model development but also for their successful application. Probabilistic flood inundation predictions are usually produced by choosing a method of weighting the model parameter space, but previous study suggests that this choice leads to clear differences in inundation probabilities. This study aims to address the evaluation of the reliability of these probabilistic predictions. However, a lack of an adequate number of observations of flood inundation for a catchment limits the application of conventional methods of evaluating predictive reliability. Consequently, attempts have been made to assess the reliability of probabilistic predictions using multiple observations from a single flood event. Here, a LISFLOOD‐FP hydraulic model of an extreme (>1 in 1000 years) flood event in Cockermouth, UK, is constructed and calibrated using multiple performance measures from both peak flood wrack mark data and aerial photography captured post‐peak. These measures are used in weighting the parameter space to produce multiple probabilistic predictions for the event. Two methods of assessing the reliability of these probabilistic predictions using limited observations are utilized; an existing method assessing the binary pattern of flooding, and a method developed in this paper to assess predictions of water surface elevation. This study finds that the water surface elevation method has both a better diagnostic and discriminatory ability, but this result is likely to be sensitive to the unknown uncertainties in the upstream boundary condition. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
18.
J. J. Yu X. S. Qin O. Larsen 《Stochastic Environmental Research and Risk Assessment (SERRA)》2013,27(3):725-735
A joint Monte Carlo and fuzzy possibilistic simulation (MC-FPS) approach was proposed for flood risk assessment. Monte Carlo simulation was used to evaluate parameter uncertainties associated with inundation modeling, and fuzzy vertex analysis was applied for promulgating human-induced uncertainty in flood damage estimation. A study case was selected to show how to apply the proposed method. The results indicate that the outputs from MC-FPS would present as fuzzy flood damage estimate and probabilistic-possibilistic damage contour maps. The stochastic uncertainty in the flood inundation model and fuzziness in the depth-damage functions derivation would cause similar levels of influence on the final flood damage estimate. Under the worst scenario (i.e. a combined probabilistic and possibilistic uncertainty), the estimated flood damage could be 2.4 times higher than that computed from conventional deterministic approach; considering only the pure stochastic effect, the flood loss would be 1.4 times higher. It was also indicated that uncertainty in the flood inundation modeling has a major influence on the standard deviation of the simulated damage, and that in the damage-depth function has more notable impact on the mean of the fitted distributions. Through applying MC-FPS, rich information could be derived under various α-cut levels and cumulative probabilities, and it forms an important basis for supporting rational decision making for flood risk management under complex uncertainties. 相似文献
19.
Roberta-Serena Blasone Jasper A. Vrugt Henrik Madsen Dan Rosbjerg Bruce A. Robinson George A. Zyvoloski 《Advances in water resources》2008
In the last few decades hydrologists have made tremendous progress in using dynamic simulation models for the analysis and understanding of hydrologic systems. However, predictions with these models are often deterministic and as such they focus on the most probable forecast, without an explicit estimate of the associated uncertainty. This uncertainty arises from incomplete process representation, uncertainty in initial conditions, input, output and parameter error. The generalized likelihood uncertainty estimation (GLUE) framework was one of the first attempts to represent prediction uncertainty within the context of Monte Carlo (MC) analysis coupled with Bayesian estimation and propagation of uncertainty. Because of its flexibility, ease of implementation and its suitability for parallel implementation on distributed computer systems, the GLUE method has been used in a wide variety of applications. However, the MC based sampling strategy of the prior parameter space typically utilized in GLUE is not particularly efficient in finding behavioral simulations. This becomes especially problematic for high-dimensional parameter estimation problems, and in the case of complex simulation models that require significant computational time to run and produce the desired output. In this paper we improve the computational efficiency of GLUE by sampling the prior parameter space using an adaptive Markov Chain Monte Carlo scheme (the Shuffled Complex Evolution Metropolis (SCEM-UA) algorithm). Moreover, we propose an alternative strategy to determine the value of the cutoff threshold based on the appropriate coverage of the resulting uncertainty bounds. We demonstrate the superiority of this revised GLUE method with three different conceptual watershed models of increasing complexity, using both synthetic and real-world streamflow data from two catchments with different hydrologic regimes. 相似文献
20.
Monte Carlo simulations of a two‐dimensional depth‐averaged distributed bed‐roughness flow model, TELEMAC‐2D, are used to model a detailed tracer dispersion test in a complex reach of the River Severn in the Generalized Likelihood Uncertainty Estimation (GLUE) framework. A time efficient, zero equation, spatially distributed eddy viscosity model is derived from physical reasoning and used to close the flow equations. It is shown to have the property of low numerical diffusion, avoiding recourse to a globally large value of the eddy viscosity. For models of complex river flows, there are typically so many degrees of freedom in the specification of distributed parameters owing to the limitations of field data collection, that the identification of a unique model structure is unlikely. The data used here to constrain the model structure come from a continuous tracer injection experiment, comprising six spatially distributed time series of concentration measurements. Several hundred Monte‐Carlo simulations of different model structures were investigated and it was found that multiple model structures produced feasible simulations of the tracer mixing, giving rise to the phenomenon of equifinality. Rather than optimizing the model structure on the basis of the constraining data, we derive relative possibility measures that express our relative degree of belief in each model structure. These measures can then be used as weights for assessing predictive uncertainty when using a range of model structures, to estimate the flow distribution under varying stages, or for providing maps indicating fully distributed confidence limits in the risk assessments process. Such an approach is used here, and helps to identify the circumstances under which two‐dimensional modelling can be useful. The framework is not limited to the model structures that are developed herein, and more advanced process representation techniques can be included as computational efficiency increases. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献