首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Chondrules represent one of the best probes of the physical conditions and processes acting in the early solar nebula. Proposed chondrule formation models are assessed based on their ability to match the meteoritic evidence, especially experimental constraints on their thermal histories. The model most consistent with chondrule thermal histories is passage through shock waves in the solar nebula. Existing models of heating by shocks generally yield a good first‐order approximation to inferred chondrule cooling rates. However, they predict prolonged heating in the preshock region, which would cause volatile loss and isotopic fractionation, which are not observed. These models have typically included particles of a single (large) size, i.e., chondrule precursors, or at most, large particles accompanied by micron‐sized grains. The size distribution of solids present during chondrule formation controls the opacity of the affected region, and significantly affects the thermal histories of chondrules. Micron‐sized grains evaporate too quickly to prevent excessive heating of chondrule precursors. However, isolated grains in chondrule‐forming regions would rapidly coagulate into fractal aggregates. Preshock heating by infrared radiation from the shock front would cause these aggregates to melt and collapse into intermediate‐sized (tens of microns) particles. We show that inclusion of such particles yields chondrule cooling rates consistent with petrologic and isotopic constraints.  相似文献   

2.
We present numerical simulations of the thermal and dynamical histories of solid particles (chondrules and their precursors—treated as 1-mm silicate spheres) during passage of an adiabatic shock wave through a particle-gas suspension in a minimum-mass solar nebula. The steady-state equations of energy, momentum, and mass conservation are derived and integrated for both solids and gas under a variety of shock conditions and particle number densities using the free-molecular-flow approximation. These simulations allow us to investigate both the heating and cooling of particles in a shock wave and to compare the time and distance scales associated with their processing to those expected for natural chondrules. The interactions with the particles cause the gas to achieve higher temperatures and pressures both upstream and downstream of the shock than would be reached otherwise. The cooling rates of the particles are found to be nonlinear but agree approximately with the cooling rates inferred for chondrules by laboratory simulations. The initial concentration of solids upstream of the shock controls the cooling rates and the distances over which they are processed: Lower concentrations cool more slowly and over longer distances. These simulations are consistent with the hypothesis that large-scale shocks, e.g., those due to density waves or gravitational instabilities, were the dominant mechanism for chondrule formation in the nebula.  相似文献   

3.
Abstract— We investigate the possible formation of chondrules by planetesimal bow shocks. The formation of such shocks is modeled using a piecewise parabolic method (PPM) code under a variety of conditions. The results of this modeling are used as a guide to study chondrule formation in a one‐dimensional, finite shock wave. This model considers a mixture of chondrule‐sized particles and micron‐sized dust and models the kinetic vaporization of the solids. We found that only planetesimals with a radius of ?1000 km and moving at least ?8 km/s with respect to the nebular gas can generate shocks that would allow chondrule‐sized particles to have peak temperatures and cooling rates that are generally consistent with what has been inferred for chondrules. Planetesimals with smaller radii tend to produce lower peak temperatures and cooling rates that are too high. However, the peak temperatures of chondrules are only matched for low values of chondrule wavelength‐averaged emissivity. Very slow cooling (<?100s of K/hr) can only be achieved if the nebular opacity is low, which may result after a significant amount of material has been accreted into objects that are chondrule‐sized or larger, or if chondrules formed in regions of the nebula with small dust concentrations. Large shock waves of approximately the same scale as those formed by gravitational instabilities or tidal interactions between the nebula and a young Jupiter do not require this to match the inferred thermal histories of chondrules.  相似文献   

4.
Abstract– A synthesis of previous work leads to a model of chondrule formation that involves periodic melting of dispersed dust in debris clouds that were generated by collisions between chondritic planetesimals. I suggest that chondrules formed by the passage of nebular shock waves through these dust clumps, which temporarily surrounded disrupted planetesimals. Type I chondrules formed by more intense evaporative heating of fewer particles in tenuous clumps, or at the edges of dense clumps, and type II chondrules formed by less intense evaporative heating of more particles deeper within dense clumps. Chondrules reaccreted by self‐gravity into the planetesimals, mixing with less heated dust and rock. This process of disruption, melting, and reaccretion could have repeated many times. In this way, chondrite components of various origins and thermal histories could remain preserved in planetesimals as a distinctive mix of materials for extended periods of time, while still allowing for a repetitive melting process that converted some of the planetesimal debris into chondrules. I also suggest that during chondrule formation, the inner solar nebula gas was evolving by the gradual incorporation and heating of icy bodies depleted in 16O, causing a general increase in gaseous Δ17O with time in most places, especially close to the “snow line.” In this model, early formed type I chondrules in C chondrites with lower Δ17O values were produced inside the snow line, and later formed type I and type II chondrules in C and O chondrites with higher Δ17O values were created nearer the snow line after it had moved closer to the young Sun.  相似文献   

5.
The importance of experiments: Constraints on chondrule formation models   总被引：1，自引：0，他引：1  
Abstract— We review a number of constraints that have been placed on the formation of chondrules and show how these can be used to test chondrule formation models. Four models in particular are examined: the “X‐wind” model (sudden exposure to sunlight <0.1 AU from the proto‐Sun, with subsequent launching in a magnetocentrifugal outflow); solar nebula lightning; nebular shocks driven by eccentric planetesimals; and nebular shocks driven by diskwide gravitational instabilities. We show that constraints on the thermal histories of chondrules during their melting and crystallization are the most powerful constraints and provide the least ambiguous tests of the chondrule formation models. Such constraints strongly favor melting of chondrules in nebular shocks. Shocks driven by gravitational instabilities are somewhat favored over planetesimal bow shocks.  相似文献   

6.
Abstract— Numerous models have been proposed to explain the formation of chondrules, but none can be reconciled with the highly diverse properties of these objects. Here the formation of chondrules by the surface melting and ablation of small planetesimals in nebula shock waves is investigated using a numerical model. It is shown that bodies between ～1 mm and 500 m in diameter would have produced molten droplets by ablation during gas drag in nebula shocks stronger than ～2.0 Mach. The properties of chondrules produced by ablation are estimated by comparison with meteorite fusion crusts and through consideration of the environment within the bow shock envelope of ablating planetesimals. It is suggested that most ablation chondrules will have broadly chondritic compositions with depletions in siderophile and chalcophile elements and relatively high volatile contents and textures that are mainly porphyritic. The formation of chondrules by ablation of planetesimals in shock waves was probably most important at a late stage in nebula history and occurred at the same time as chondrules formed by the melting of dust particles. The high abundance of dust particles relative to larger bodies at all stages of accretion implies that only a proportion of chondrules may have been formed by ablation and that genetic groups of chondrules with very different origins may coexist in meteorites.  相似文献   

7.
Abstract— Detailed numerical models have shown that solar nebula shock waves would be able to thermally process chondrules in a way that is consistent with experimental constraints. However, it has recently been argued that the high relative velocities that would be generated between chondrules of different sizes immediately behind the shock front would lead to energetic collisions that would destroy the chondrules as they were processed rather than preserving them for incorporation into meteorite parent bodies. Here the outcome of these collisions is quantitatively explored using a simple analytic expression for the viscous dissipation of collisional energy in a liquid layer. It is shown that molten chondrules can survive collisions at velocities as high as a few hundred meters per second. It is also shown that the thermal evolution of chondrules in a given shock wave varies with chondrule size, which may allow chondrules of different textures to form in a given shock wave. While experiments are needed to further constrain the parameters used in this work, these calculations show that the expected outcomes from collisions behind shock waves are consistent with what is observed in meteorites.  相似文献   

8.
Abstract— We examine the size sorting of chondrules and metal grains within the context of the jet flow model for chondrule/CAI formation. In this model, chondrules, CAIs, AOAs, metal grains, and related components of meteorites are assumed to have formed in the outflow region of the innermost regions of the solar nebula and then were ejected, via the agency of a bipolar jet flow, to outer regions of the nebula. We wish to see if size sorting of chondrules and metal grains is a natural consequence of this model. To assist in this task, we used a multiprocessor system to undertake Monte Carlo simulations of the early solar nebula. The paths of a statistically significant number of chondrules and metal grains were analyzed as they were ejected from the outflow and travelled over or into the solar nebula. For statistical reasons, only distances ≤3 AU from the Sun were examined. Our results suggest that size sorting can occur provided that the solar nebula jet flow had a relatively constant flow rate as function of time. A constant flow rate outflow produces size sorting, but it also produces a sharp size distribution of particles across the nebula and a metal‐rich Fe/Si ratio. When the other extreme of a fully random flow rate was examined, it was found that size sorting was removed, and the initial material injected into the flow was simply spread over most of the the solar nebula. These results indicate that the outflow can act as a size and density classifier. By simply varying the flow rate, the outflow can produce different types of proto‐meteorites from the same chondrule and metal grain feed stock. As a consequence of these investigations, we observed that the number of particles that impact into the nebula drops off moderately rapidly as a function of distance r from the Sun. We also derive a corrected form of the Epstein stopping time.  相似文献   

9.
The origin of three-dimensional shapes of chondrules is an important information to identify their formation mechanism in the early solar nebula. The measurement of their shapes by using X-ray computed topography suggested that they are usually close to perfect spheres, however, some of them have rugby-ball-like (prolate) shapes [Tsuchiyama, A., Shigeyoshi, R., Kawabata, T., Nakano, T., Uesugi, K., Shirono, S., 2003. Lunar Planet. Sci. 34, 1271-1272]. We considered that the prolate shapes reflect the deformations of chondrule precursor dust particles when they are heated and melted in the high velocity gas flow. In order to reveal the origin of chondrule shapes, we carried out the three-dimensional hydrodynamics simulations of a rotating molten chondrule exposed to the gas flow in the framework of the shock-wave heating model for chondrule formation. We adopted the gas ram pressure acting on the chondrule surface of in a typical shock wave. Considering that the chondrule precursor dust particle has an irregular shape before melting, the ram pressure causes a net torque to rotate the particle. The estimated angular velocity is for the precursor radius of r0=1 mm, though it has a different value depending on the irregularity of the shape. In addition, the rotation axis is likely to be perpendicular to the direction of the gas flow. Our calculations showed that the rotating molten chondrule elongates along the rotation axis, in contrast, shrinks perpendicularly to it. It is a prolate shape. The reason why the molten chondrule is deformed to a prolate shape was clearly discussed. Our study gives a complementary constraint for chondrule formation mechanisms, comparing with conventional chemical analyses and dynamic crystallization experiments that have mainly constrained the thermal evolutions of chondrules.  相似文献   

10.
Abstract— Meteoritic data strongly suggest that most chondrules reached maximum temperatures in a range of 1650–2000 K and cooled at relatively slow rates of 100–1000 K/h, implying a persistence of external energy supply. The presence of fine‐grained rims around chondrules in most unequilibrated chondrites also indicates that a significant quantity of micron‐sized dust was present in chondrule formation regions. Here, we assume that the persistent external energy source needed to explain chondrule cooling rates consists primarily of radiation from surrounding heated chondrules, fine dust, and gas after the formation event. Using an approximate one‐dimensional numerical model for the outward diffusion of thermal radiation from such a system, the scale sizes of formation regions required to yield acceptable cooling rates are determined for a range of possible chondrule, dust, and gas parameters. Results show that the inferred scale sizes depend sensitively on the number densities of micron‐sized dust and on their adopted optical properties. In the absence of dust, scale sizes > 1000 km are required for plausible maximum chondrule number densities and heated gas parameters. In the presence of dust with mass densities comparable to those of the chondrules and with absorptivities and emissivities of ～0.01 calculated for Mie spheres with a pure mineral composition, scale sizes as small as ～100 km are possible. If dust absorptivities and emissivities approach unity (as may occur for particles with more realistic shapes and compositions), then scale sizes as small as ×10 km are possible. Considering all uncertainties in model parameters, it is concluded that small scale sizes (10–100 km) for chondrule formation regions are allowed by the experimentally inferred cooling rates.  相似文献   

11.
Abstract— The liquidus temperatures of chondrules range from about 1200 °C to almost 1900 °C, based on the calculation of Herzberg (1979). Dynamic melting and crystallization experiments with no external seeding suggest that some chondrule textures formed with initial temperatures below the liquidus (e.g., porphyritic, granular) and some were completely melted (e.g., excentroradial, glassy). Type I and III chondrules in carbonaceous chondrites in this interpretation consist of incompletely melted magnesian chondrules, completely melted silica-rich chondrules and intermediate composition chondrules with both porphyritic and nonporphyritic textures. A similar pattern for ordinary chondrites, with data also for Type II porphyritic and barred olivine chondrules, suggests that few chondrules with liquidus temperatures over 1750 °C were completely melted and few with under 1400 °C were incompletely melted. The range of liquidus temperatures for barred olivine chondrules, for which initial temperatures appear to have been essentially at the liquidus, is similar. Most chondrules may therefore have been heated to temperatures of 1400–1750 °C and, because of a peak in the distribution of barred olivine chondrule temperatures at 1500–1550 °C, the temperatures appear normally distributed within this range. Given a narrow range of temperatures, bulk composition is at least as important as initial temperature in controlling chondrule textures. Truly granular (not microporphyritic) Type I and truly glassy Type II and III chondrules appear under-represented in nature according to this model, based on internal nucleation experiments. External heterogeneous nucleation, or seeding due to droplet-dust collisions, is likely to occur in a dusty nebula and has been shown to reproduce chondrule textures experimentally. Generally high initial temperatures (1600–1800 °C), coupled with dust-seeding of superheated droplets of less refractory composition is an alternative explanation of chondrule textures. Cooling rates of 100–1000 °C/hr are required for chondrules, which must have been mass produced in clouds with sufficient particle density to buffer cooling rate and perhaps also initial temperature. Melting precursor particles in a thick clump and/or the nebular mid-plane would provide evaporation and thus explain the high oxidation state and volatile content of chondrules, relative to the bulk hydrogen-rich nebula, as well as the nature of the cooling.  相似文献   

12.
Abstract— Cooling rates of chondrules provide important constraints on the formation process of chondrite components at high temperatures. Although many dynamic crystallization experiments have been performed to obtain the cooling rate of chondrules, these only provide a possible range of cooling rates, rather than providing actual measured values from natural chondrules. We have developed a new model to calculate chondrule cooling rates by using the Fe‐Mg chemical zoning profile of olivine, considering diffusional modification of zoning profiles as crystals grow by fractional crystallization from a chondrule melt. The model was successfully verified by reproducing the Fe‐Mg zoning profiles obtained in dynamic crystallization experiments on analogs for type II chondrules in Semarkona. We applied the model to calculating cooling rates for olivine grains of type II porphyritic olivine chondrules in the Semarkona (LL3.00) ordinary chondrite. Calculated cooling rates show a wide range from 0.7 °C/h to 2400 °C/h and are broadly consistent with those obtained by dynamic crystallization experiments (10–1000 °C/h). Variations in cooling rates in individual chondrules can be attributed to the fact that we modeled grains with different core Fa compositions that are more Fe‐rich either because of sectioning effects or because of delayed nucleation. Variations in cooling rates among chondrules suggest that each chondrule formed in different conditions, for example in regions with varying gas density, and assembled in the Semarkona parent body after chondrule formation.  相似文献   

13.
Abstract— Transmission-electron-microscopy (TEM) and optical data suggest that chondrules in the Chainpur (LL3.4) chondrite experienced varied thermal and deformation histories prior to the final agglomeration of the meteorite. Chainpur may be regarded as an agglomerate or breccia that experienced little deformation or heating during and after the final accumulation and compaction of its constituents. One chondrule in Chainpur was impact-shocked to high pressures (～ 20–50 GPa), almost certainly prior to final agglomeration, either while it was an independent entity in space or while it was in the regolith of a parent body. However, most (>85%) of the chondrules in Chainpur were evidently not significantly shock-metamorphosed subsequent to their formation. The dearth of shock effects implies that most chondrules in Chainpur did not form by shock melting, although some chondrules may have formed by this process. Dusty-metal-bearing olivine grains, which are widely interpreted to have escaped melting during chondrule formation, contain moderate densities of dislocations (～ 108 cm?2). The dislocations in these grains were introduced before or during the last episode of melting in at least one chondrule. This observation can be explained if olivine was impact-deformed before or during chondrule formation, or if olivine was strained by reduction or thermally-induced processes during chondrule formation. Low-Ca pyroxene grains in chondrules are often strained. In most cases this strain probably arose as a by-product of polytype transformations (protoenstatite → clinoenstatite/orthoenstatite and clinoenstatite → orthoenstatite) that occurred during the igneous crystallization and static annealing of chondrules. Droplet chondrules with glassy mesostases were minimally annealed, consistent with an origin as relatively rapidly cooled objects in an unconfined, cold environment. Some irregular chondrules and at least one droplet chondrule were thermally metamorphosed prior to final agglomeration, either as a result of moderately slow cooling (～ 100 °C/hr) from melt temperatures (during autometamorphism) or as a result of reheating episodes. Two of the most annealed chondrules contain relatively abundant plagioclase feldspar, and one of these has a uniform olivine composition appropriate to that of an LL4 chondrite.  相似文献   

14.
Augusto Carballido 《Icarus》2011,211(1):876-884
Numerical magnetohydrodynamic (MHD) simulations of a turbulent solar nebula are used to study the growth of dust mantles swept up by chondrules. A small neighborhood of the solar nebula is represented by an orbiting patch of gas at a radius of 3 AU, and includes vertical stratification of the gas density. The differential rotation of the nebular gas is replaced by a shear flow. Turbulence is driven by destabilization of the flow as a result of the magnetorotational instability (MRI), whereby magnetic field lines anchored to the gas are continuously stretched by the shearing motion. A passive contaminant mimics small dust grains that are aerodynamically well coupled to the gas, and chondrules are modeled by Lagrangian particles that interact with the gas through drag. Whenever a chondrule enters a region permeated by dust, its radius grows at a rate that depends on the local dust density and the relative velocity between itself and the dust. The local dust abundance decreases accordingly. Compaction and fragmentation of dust aggregates are not included. Different chondrule volume densities ρc lead to varying depletion and rimmed-chondrule size growth times. Most of the dust sweep-up occurs within ～1 gas scale-height of the nebula midplane. Chondrules can reach their asymptotic radius in 10–800 years, although short growth times due to very high ρc may not be altogether realistic. If the sticking efficiency Q of dust to chondrules depends on their relative speed δv, such that Q < 10?2 whenever δv > vstick ≈ 34 cm/s (with vstick a critical sticking velocity), then longer growth times result due to the prevalence of high MRI-turbulent relative velocities. The vertical variation of nebula turbulent intensity results in a moderate dependence of mean rimmed-chondrule size with nebula height, and in a ～20% dispersion in radius values at every height bin. The technique used here could be combined with Monte Carlo (MC) methods that include the physics of dust compaction, in a self-consistent MHD-MC model of dust rim growth around chondrules in the solar nebula.  相似文献   

15.
A shock-wave heating model is one of the possible models for chondrule formation. We examine, within the framework of a shock-wave heating model, the effects of evaporation on the heating of chondrule precursor particles and the stability of their molten state in the postshock flow. We numerically simulate the heating process in the flow taking into account evaporation. We find that the melting criterion and the minimum radius criterion do not change significantly. However, if the latent heat cooling due to the evaporation dominates the radiative cooling from the precursor particle, the peak temperature of the precursor particle is suppressed by a few hundred Kelvins. We also find that the total gas pressure (ram plus static) acting on the precursor particle exceeds the vapor pressure of the molten precursor particle. Therefore, it is possible to form chondrules in the shock-wave heating model if the precursor temperature increases up to the melting point.  相似文献   

16.
Abstract— The primordial asteroid belt contained at least several hundred and possibly as many as 10,000 bodies with diameters of 1000 km or larger. Following the formation of Jupiter, nebular gas drag combined with passage of such bodies through Jovian resonances produced high eccentricities (e = 0.3‐0.5), low inclinations (i < 0.5°), and, therefore, high velocities (3–10 km/s) for “resonant” bodies relative to both nebular gas and non‐resonant planetesimals. These high velocities would have produced shock waves in the nebular gas through two mechanisms. First, bow shocks would be produced by supersonic motion of resonant bodies relative to the nebula. Second, high‐velocity collisions of resonant bodies with non‐resonant bodies would have generated impact vapor plume shocks near the collision sites. Both types of shocks would be sufficient to melt chondrule precursors in the nebula, and both are consistent with isotopic evidence for a time delay of ?1‐1.5 Myr between the formation of CAIs and most chondrules. Here, initial simulations are first reported of impact shock wave generation in the nebula and of the local nebular volumes that would be processed by these shocks as a function of impactor size and relative velocity. Second, the approximate maximum chondrule mass production is estimated for both bow shocks and impact‐generated shocks assuming a simplified planetesimal population and a rate of inward migration into resonances consistent with previous simulations. Based on these initial first‐order calculations, impact‐generated shocks can explain only a small fraction of the minimum likely mass of chondrules in the primordial asteroid belt (?1024‐1025g). However, bow shocks are potentially a more efficient source of chondrule production and can explain up to 10–100 times the estimated minimum chondrule mass.  相似文献   

17.
Abstract— In this paper, we review the mineralogy and chemistry of calcium‐aluminum‐rich inclusions (CAIs), chondrules, FeNi‐metal, and fine‐grained materials of the CR chondrite clan, including CR, CH, and the metal‐rich CB chondrites Queen Alexandra Range 94411, Hammadah al Hamra 237, Bencubbin, Gujba, and Weatherford. The members of the CR chondrite clan are among the most pristine early solar system materials, which largely escaped thermal processing in an asteroidal setting (Bencubbin, Weatherford, and Gujba may be exceptions) and provide important constraints on the solar nebula models. These constraints include (1) multiplicity of CAI formation; (2) formation of CAIs and chondrules in spatially separated nebular regions; (3) formation of CAIs in gaseous reservoir(s) having 16O‐rich isotopic compositions; chondrules appear to have formed in the presence of 16O‐poor nebular gas; (4) isolation of CAIs and chondrules from nebular gas at various ambient temperatures; (5) heterogeneous distribution of 26Al in the solar nebula; and (6) absence of matrix material in the regions of CAI and chondrule formation.  相似文献   

18.
Meteoritical and astrophysical models of planet formation make contradictory predictions for dust concentration factors in chondrule-forming regions of the solar nebula. Meteoritical and cosmochemical models strongly suggest that chondrules, a key component of the meteoritical record, formed in regions with solids-to-gas mass ratios orders above the solar nebula average. However, models of dust grain dynamics in protoplanetary disks struggle to surpass concentration factors of a few except during very short-lived stages in a dust grain's life. Worse, those models do not predict significant concentration factors for dust grains the size of chondrule precursors. We briefly develop the difficulty in concentrating dust particles in the context of nebular chondrule formation and show that the disagreement is sufficiently stark that cosmochemists should explore ideas that might revise the concentration factor requirements downward.  相似文献   

19.
Abstract— We test the hypothesis that chondrules (and Type B and C calcium-aluminum-rich inclusions, CAIs) originated during passage of precursors through bow shocks upstream of planetesimals moving supersonically relative to nebula gas. A two-dimensional piecewise parabolic method (PPM) hydrocode, supplemented by a one-dimensional adiabatic shock model, is employed to simulate the postshock gas density, temperature, and velocity fields for given planetesimal sizes, velocities, and ambient nebular densities and temperatures. Thermal histories of incident silicate particles are calculated in the free molecular flow approximation by integration of the one-dimensional equations of gas-grain energy and momentum transfer. For gas number densities >1014 cm?3, Mach numbers in the range of 4 to 5 are sufficient to melt isolated spherical particles with radii in the range 0.05 to 0.5 mm during passage of shocked gas thicknesses of 25–35 km. Minimum gas-planetesimal relative velocities are in the range 5.5–7 km/s, implying orbital eccentricities >0.2 and/or inclinations >15°. Melting of centimeter-sized CAI precursors requires either higher Mach numbers (6–7) or ambient gas densities >1015 cm?3. For a constant radial distribution of planetesimal orbital eccentricities and inclinations, the model predicts more efficient melting of precursor particles at decreasing radial distances from the Sun where planetesimal velocities are largest. In order to process a significant fraction of solids in the nebula, planetesimals near ～2.5 AU during the chondrule formation epoch must have had a range of eccentricities and inclinations comparable to those presently observed in the residual asteroid belt. The most likely energy source for maintaining the necessary gas-planetesimal relative velocities is external gravitational perturbations associated with the forming outer planets, primarily Jupiter.  相似文献   

20.
On the Possibility of Lightning in the Protosolar Nebula   总被引：1，自引：0，他引：1  
S.G. Gibbard  E.H. Levy  G.E. Morfill 《Icarus》1997,130(2):517-533
Chondrules constitute a significant fraction of primitive meteorites. Their thermal history includes rapid melting followed by cooling on timescales of minutes to hours. The mechanism underlying such extreme, short-lived thermal excursions away from the prevailing, much milder nebular equilibrium conditions has eluded understanding for many decades. Among the prime candidate mechanisms long thought to provide a possible explanation of chondrule formation is lightning—large-scale electrostatic discharges—in the protoplanetary nebula.In this paper, we explore the possible occurrence of such electrostatic discharges in the protoplanetary nebula powered by precipitation or other processes analogous to that believed to cause lightning on Earth and other planets. Our analysis incorporates charge separation in collisions of water-ice or other solid particles, and includes a self-consistent nebular electrical conductivity determined by a balance between production of free electrons and ions and loss to grain surfaces. We find that development of a large-scale electric field strong enough to produce discharges does not occur under conditions characteristic of protostellar nebulae. This is mainly a result of the fact that the high electrical conductivity of the environment and the relatively low density of solid particles combine to yield a situation in which the large scale electric fields, as well as the electric charges segregated on the particles are short circuited by the highly mobile electrons and ions. We also consider the possibility of lightning in altered nebula environments with higher than canonical dust density, such as a dust subdisk.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号