共查询到20条相似文献，搜索用时 46 毫秒
1.
The small-scale roughness of the sea surface acts as an important link in air-sea interaction processes. Radar and sonar waves are scattered by short surface waves providing the basis for remote sensing methods of the sea surface. At high wind speeds, breaking waves occur. Bubbles penetrate into the water and drastically increase acoustical reverberation, transmission loss and ambient noise. Thus, the development of short waves and wave breaking have to be known to apply radar remote sensing to the surface and to deduce from radar backscatter which sonar conditions prevail. To measure the wind dependence of short waves an experimental device was constructed for use from stationary platforms. It is nearly all-weather capable and can easily be handled by a crane. On the other hand, frequencies of short waves measured in a fixed position are extremely frequency shifted by currents. This limits the usefulness of tower-based measurements, e.g., the short wave modulation by wind and waves or currents can only be estimated in a rough approximation. Consequently, a buoy was developed to reduce the frequency shifts. The principle of the buoy is to drift in the local surface current and to follow the amplitudes of long waves. Therefore, short waves are measured in facets of long waves and the Doppler shifts are minimized. The wind is measured at a constant height above the long wave profile and relative to the moving facets. The paper describes the conventional measuring device and points out the necessity of the drifting buoy system. Examples of wind and wave spectra are presented and short wave modulations by long waves are depicted, too. From these measurements, new insights in short wave behaviour have to be expected 相似文献
2.
The impact of rain and spray on the ocean disturbs the sea surface and generates underwater ambient noise. The short scale roughness is influenced by impacting drops due to the momentum transfer. Radar and sonar signals are scattered by the short elements of the sea surface. Spray and rain impact change their characteristics, and consequently affect radar and sonar backscatter. In situ measurements of rain and spray impact are necessary to study their effects on the sea surface. Accurate sea measurements of rain momentum fluxes and drop size distributions are a complex problem, especially on buoys. A new measuring technique has been developed using hydrophones. Exposed to precipitation, these instruments are affected directly by the impact of rain. A drop falling on the hydrophone deforms its surface and is sensed by a piezoelectric transducer. The voltage output of the sensor is a rapidly decaying oscillation. The integral value of this signal is a measure of the drop momentum, and the drop size can be deduced. Laboratory studies of defined drops as well as field measurements of natural rain have shown that hydrophones can be used to determine drop momentums and drop size distributions. Based on simultaneous rain measurements by a Joss-Waldvogel Disdrometer and a hydrophone, an analytical function has been derived which relates drop size and hydrophone voltage output 相似文献
3.
Kenneth S. Davis Niall C. Slowey Ingo H. Stender Hannelore Fiedler William R. Bryant Gunther Fechner 《Geo-Marine Letters》1996,16(3):273-278
The relationship between spatial variations of the properties of sea-floor sediments and acoustic backscatter from the surface of the sea floor on the continental shelf off of Panama City, Florida, USA, is investigated using surficial sediment grab samples and digital side-scan sonar data. Acoustic backscatter strength has a high, direct correlation with the mean grain size of the sediments. Acoustic backscatter strength also correlates directly with the carbonate content of the sediments, particularly in medium-and coarse-sand facies, because large, irregularly shaped, carbonate particles affect both the mean grain size of the sediments and the roughness of the surface of the sea floor. 相似文献
4.
5.
The effect of variations in ocean surface roughness characteristics with upwind/downwind direction, reported by other investigators, is used to compute radar cross section (sigmadeg ) and to assess the errors which may arise in present and planned altimeter sensors. Based on an analysis of the rough surface impulse response, the uncertainty between attitude angle andsigmadeg asymmetry is found to cause height errors as large as 12 cm, depending on off-nadir angles and sea state. Additionally, the previously reported data in conjunction with computed facet backscatter are found to producesigmadeg characteristics at large off-nadir angles which are in better agreement with experimental results than those predicted by physical optics Gaussian theory. 相似文献
6.
7.
GNSS-R观测下的海面飓风风速反演 总被引：1，自引：0，他引：1
利用全球导航卫星系统在地球表面的反射信号（GNSS-R）进行海面风速反演已经被广泛研究并作为一种重要的遥感手段。目前,该L波段微波信号的相关功率已可以在多普勒频率和时延码片空间进行多普勒时延图像的成像。由于该图像的图像特征与海面粗糙度有较高的相关性,因此能够用来进行海面风场反演。然而,对于该遥感手段而言,其双基雷达前向散射截面（BRCS）理论上与海面粗糙度有更高的相关性,如同目前合成孔径雷达使用后向雷达散射截面而非相关功率。所以,本文通过改进已有的GNSS-R的双基雷达散射截面方程,代替相关功率在多普勒时延空间进行成像,得出了与海面粗糙度相关的双基雷达散射截面图像（BRCS map）。基于该图像,本文提出了三种与其形状特征相关的观测量,通过2005年Dennis飓风GNSS-R机载数据生成的16000多幅图像进行地球物理模式函数建模并与经典的一维时延波形匹配方法得出结果进行对比分析,得出更为精确的风速反演结果。 相似文献
8.
A number of models which would explain ocean wave imagery taken with a synthetic aperture imaging radar are analyzed analytically and numerically. Actual radar imagery is used to support some conclusions. The models considered correspond to three sources of radar backscatter cross section modulation: tilt modulation, roughness variation, and the wave orbital velocity. The effect of the temporal changes of the surface structure, parametric interactions, and the resulting distortions are discussed. 相似文献
9.
All ocean wave components contribute to the second-order scattering of a high-frequency (HF) radio wave by the sea surface. It is therefore theoretically possible to estimate the ocean wave spectrum from the radar backscatter. To extract the wave information, it is necessary to solve the nonlinear integral equation that describes the relationship between the backscatter spectrum and the ocean wave directional spectrum. Different inversion techniques have been developed for this problem by different researchers, but there is at present no accepted “best” method. This paper gives an assessment of the current status of two methods for deriving sea-state information from HF radar observations of the sea surface. The methods are applied to simulated data and to an experimental data set with sea-truth being provided by a directional wave buoy 相似文献
10.
This paper describes the results of an experimental investigation of the microwave backscatter from several laboratory generated transient breaking waves. The breaking waves were generated mechanically in a 35 m×0.7 m×1.14 m deep wave tank, utilizing chirped wave packets spanning the frequency range 0.8-2.0 Hz. Backscatter measurements, were taken by a X/K-band (10.525 GHz, 24.125 GHz) continuous wave Doppler radar at 30°, 45°, and 60° angles of incidence, and at azimuth angles of 0° and 180° relative to the direction of wave propagation. Surface profiles were measured with a high-speed video camera and laser sheet technique. Specular facets were detected by imaging the surface from the perspective of the radar. The maximum radar backscatter occurred in the upwave direction prior to wave breaking, was nearly polarization independent and corresponded to the detection of specular facets on the steepened wave face. This peak radar backscatter was predicted through a finite conductivity corrected physical optics technique over the measured surface wave profiles. Post break backscatter was predicted using a roughness corrected physical optics technique and the small perturbation method, which was found to predict the returns for vertical polarization, but to under predict the horizontal returns 相似文献
11.
The sediment backscatter strength measured by multibeam echosounders is a key feature for seafloor mapping either qualitative (image mosaics) or quantitative (extraction of classifying features). An important phenomenon, often underestimated, is the dependence of the backscatter level on the azimuth angle imposed by the survey line directions: strong level differences at varying azimuth can be observed in case of organized roughness of the seabed, usually caused by tide currents over sandy sediments. This paper presents a number of experimental results obtained from shallow-water cruises using a 300-kHz multibeam echosounder and specially dedicated to the study of this azimuthal effect, with a specific configuration of the survey strategy involving a systematic coverage of reference areas following “compass rose” patterns. The results show for some areas a very strong dependence of the backscatter level, up to about 10-dB differences at intermediate oblique angles, although the presence of these ripples cannot be observed directly—neither from the bathymetry data nor from the sonar image, due to the insufficient resolution capability of the sonar. An elementary modeling of backscattering from rippled interfaces explains and comforts these observations. The consequences of this backscatter dependence upon survey azimuth on the current strategies of backscatter data acquisition and exploitation are discussed. 相似文献
12.
Remote estimation of surficial seafloor properties through the application Angular Range Analysis to multibeam sonar data 总被引：2，自引：2，他引：2
The variation of the backscatter strength with the angle of incidence is an intrinsic property of the seafloor, which can
be used in methods for acoustic seafloor characterization. Although multibeam sonars acquire backscatter over a wide range
of incidence angles, the angular information is normally neglected during standard backscatter processing and mosaicking.
An approach called Angular Range Analysis has been developed to preserve the backscatter angular information, and use it for
remote estimation of seafloor properties. Angular Range Analysis starts with the beam-by-beam time-series of acoustic backscatter
provided by the multibeam sonar and then corrects the backscatter for seafloor slope, beam pattern, time varying and angle
varying gains, and area of insonification. Subsequently a series of parameters are calculated from the stacking of consecutive
time series over a spatial scale that approximates half of the swath width. Based on these calculated parameters and the inversion
of an acoustic backscatter model, we estimate the acoustic impedance and the roughness of the insonified area on the seafloor.
In the process of this inversion, the behavior of the model parameters is constrained by established inter-property relationships.
The approach has been tested using a 300 kHz Simrad EM3000 multibeam sonar in Little Bay, NH. Impedance estimates are compared
to in situ measurements of sound speed. The comparison shows a very good correlation, indicating the potential of this approach for
robust seafloor characterization. 相似文献
13.
An analysis of the radar backscattering from the ocean surface covered by oil spill is presented using a microwave scattering model and Monte-Carlo simulation. In the analysis, a one-dimensional rough sea surface is numerically generated with an ocean waveheight spectrum for a given wind velocity. A two-layered medium is then generated by adding a thin oil layer on the simulated rough sea surface. The electric fields backscattered from the sea surface with two-layered medium are computed with the method of moments (MoM), and the backscattering coefficients are statistically obtained with N independent samples for each oil-spilled surface using the Monte-Carlo technique for various conditions of surface roughness, oil-layer thickness, frequency, polarization and incidence angle. The numerical simulation results are compared with theoretical models for clean sea surfaces and SAR images of an oil-spilled sea surface caused by the Hebei (Hebei province, China) Spirit oil tanker in 2007. Further, conditions for better oil spill extraction are sought by the numerical simulation on the effects of wind speed and oil-layer thickness at different incidence angles on the backscattering coefficients. 相似文献
14.
Baskakov A. Gagarin S. Kalinkevitch A. Kutuza B. Terekhov V. 《Oceanic Engineering, IEEE Journal of》1984,9(5):325-328
We discuss the advantages provided by the combined use of a polarization microwave radiometer and a short-pulse radar altimeter for sea roughness monitoring. A brief analysis of the potential of each device taken separately is carried out, which shows the advisability of their combination. The method and the results of the experiment performed with an airborneK -band radiometer and an altimeter are described. It is shown that, in regions of fully developed roughness, a correlation exists between the polarization characteristics of the microwave radiation by the sea surface and the rms sea waveheight as measured by the altimeter. Correlation is not found in regions where the roughness is not developed. Therefore, the combination of the two instruments makes it possible to sense the regions of fully developed sea roughness. 相似文献
15.
16.
Distinct side-scan sonar, RADARSAT SAR, and acoustic profiler signatures of gas and oil seeps on the Gulf of Mexico slope 总被引：4，自引：0，他引：4
S. M. De Beukelaer I. R. MacDonald N. L. Guinnasso Jr. J. A. Murray 《Geo-Marine Letters》2003,23(3-4):177-186
We examined bubble streams from four natural seep sites on the upper continental slope of the Gulf of Mexico. Synthetic aperture radar images verified surface oil slicks over sites with oily bubbles but not over those with non-oily bubbles. Non-oily bubbles produced high backscatter on side-scan sonar records, but were difficult to detect with acoustic profilers. Oily bubbles produced clear signatures extending from the seafloor to the near-surface on acoustic profiles and produced acoustic shadows on side-scan sonar records. We hypothesize that the bubbles oily coating causes the different signatures, since all bubbles were resonant at the tested frequencies. 相似文献
17.
A number of models exist that attempt to explain wave imagery obtained with a synthetic aperture radar (SAR). These models are of two types; static models that depend on instantaneous surface features and dynamic models that employ surface velocities. Radar backscatter values (sigma_{0} ) were calculated from 1.3- and 9.4-GHz SAR data collected off Marineland, FL. Thesigma_{0} data (averaged over many wave trains) collected at Marineland can best be modeled by the Bragg-Rice-Phillips model which is based on roughness variation and the complex dielectric constant of oceans. This result suggests that capillaries on the surface of oceanic waves are the primary cause for the surface return observed by a SAR. Salinity and temperature of the sea at small and medium incidence angles produce little effect upon sea-surface reflection coefficients atX -band, for either of the linear polarizations. The authors' observation of moving ocean, imaged by the SAR and studied in the SAR optical correlator, support a theory that the ocean surface appears relatively stationary in the absence of currents. The reflecting surface is most likely moving slowly (i.e., capillaries) relative to the phase velocity of the large gravity waves. 相似文献
18.
The ability to use radar to discriminate Arctic Sea ice types has been investigated using surface-based and helicopter-borne scatterometer systems. The surface-based FM/CW radar operated at 1.5 GHz and at multiple frequencies in the 8-18-GHz region. Measurements were made at angles of10deg to70deg from nadir. The helicopter-based radar operated at the 8-18-GHz frequencies with incidence angles of0deg to60deg . Extensive surface-truth measurements were made at or near the time of backscattar measurement to describe the physical and electrical properties of the polar scene. Measurements in the 8-18-GHz region verify the ability to discriminate multiyear, thick first-year, thin first-year, and pressure-ridged sea ice and lake ice. The lowest frequency, 9 GHz, was found to provide the greatest contrast between these ice categories, with significant levels of separation existing between angles from15deg to70deg . The radar cross sections for like antenna polarizations, VV and HH, were very similar in absolute level and angular response. Cross-polarization, VH and HV, provided the greatest contrast between ice types, The 1.5-GHz measurements showed that thick first-year, thin first-year, and multiyear sea ice cannot be distinguished at10deg to60deg incidence angles with like polarization, VV, by backscatter alone; but that undeformed sea ice can be discriminated from pressure-ridged ice and lake ice. The effect of snow cover on the backscatter from thick first-year ice was also investigated. It contributes on the order of 0 to 4 dB, depending on frequency and incidence angle; the contribution of the snow layer increased with increasing frequency. Snow cover on smooth lake ice was found to be a major backscatter mechanism. Summer measurements demonstrate the inability to extend the knowledge of the backscatter from sea ice under spring conditions to all seasons. 相似文献
19.
Histograms of echo peaks from three different topographic regions in the outer beams of a Sea Beam sonar show distinct variation as the topography changes from the North Cleft ridge to the Cascadia abyssal plain in the Pacific Ocean. Parameter estimation of probability density functions (pdfs) shows significant departure from Rayleigh pdf for the nonabyssal plain sites. The spectral character of the sea-floor roughness from an acoustic backscatter model suggests that the ridge area is dominated by large-scale roughness and the abyssal plain by small scale. It appears that change in roughness magnitude effects the observed histogram characteristics. 相似文献