首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
A detailed laboratory study of 53 sandstone samples from 23 outcrops and 156 conventional core samples from the Maastrichtian-Paleocene Scollard-age fluvial strata in the Western Canada foredeep was undertaken to investigate the reservoir characteristics and to determine the effect of diagenesis on reservoir quality. The sandstones are predominantly litharenites and sublitharenites, which accumulated in a variety of fluvial environments. The porosity of the sandstones is both syn-depositional and diagenetic in origin. Laboratory analyses indicate that porosity in sandstones from outcrop samples with less than 5% calcite cement averages 14%, with a mean permeability of 16 mD. In contrast, sandstones with greater than 5% calcite cement average 7.9% porosity, with a mean permeability of 6.17 mD. The core porosity averages 17% with 41 mD permeability. Cementation coupled with compaction had an important effect in the destruction of porosity after sedimentation and burial. The reservoir quality of sandstones is also severely reduced where the pore-lining clays are abundant (>15%). The potential of a sandstone to serve as a reservoir for producible hydrocarbons is strongly related to the sandstone’s diagenetic history. Three diagenetic stages are identified: eodiagenesis before effective burial, mesodiagenesis during burial, and telodiagenesis during exposure after burial. Eodiagenesis resulted in mechanical compaction, calcite cementation, kaolinite and smectite formation, and dissolution of chemically unstable grains. Mesodiagenesis resulted in chemical compaction, precipitation of calcite cement, quartz overgrowths, and the formation of authigenic clays such as chlorite, dickite, and illite. Finally, telodiagenesis seems to have had less effect on reservoir properties, even though it resulted in the precipitation of some kaolinite and the partial dissolution of feldspar.  相似文献   

2.
This paper investigates the reservoir potential of deeply-buried Eocene sublacustrine fan sandstones in the Bohai Bay Basin, China by evaluating the link between depositional lithofacies that controlled primary sediment compositions, and diagenetic processes that involved dissolution, precipitation and transformation of minerals. This petrographic, mineralogical, and geochemical study recognizes a complex diagenetic history which reflects both the depositional and burial history of the sandstones. Eogenetic alterations of the sandstones include: 1) mechanical compaction; and 2) partial to extensive non-ferroan carbonate and gypsum cementation. Typical mesogenetic alterations include: (1) dissolution of feldspar, non-ferroan carbonate cements, gypsum and anhydrite; (2) precipitation of quartz, kaolinite and ferroan carbonate cements; (3) transformation of smectite and kaolinite to illite and conversion of gypsum to anhydrite. This study demonstrates that: 1) depositional lithofacies critically influenced diagenesis, which resulted in good reservoir quality of the better-sorted, middle-fan, but poor reservoir quality in the inner- and outer-fan lithofacies; 2) formation of secondary porosity was spatially associated with other mineral reactions that caused precipitation of cements within sandstone reservoirs and did not greatly enhance reservoir quality; and 3) oil emplacement during early mesodiagenesis (temperatures > 70 °C) protected reservoirs from cementation and compaction.  相似文献   

3.
Fine-grained siliciclastic lithologies commonly act as sealing caprocks to both petroleum fields and host reservoirs for carbon capture (CO2 sequestration) projects. Fine-grained lithologies are thus of great importance in controlling fluid flow and storage in the subsurface. However, fine-grained rocks are rarely characterised in terms of primary sedimentary characteristics, diagenesis and how these relate to their flow properties (i.e. sealing or caprock quality). Seventeen samples from Lower Carboniferous estuarine caprock to a gas field (also to be used as a carbon capture site), have been analysed using a range of petrological and petrophysical techniques. The rock unit that represents the caprock to this gas field was found to be predominantly silt grade with porosity values as low as 1.8%. In these rocks, caprock quality (porosity) is controlled by intrinsic and extrinsic factors linked to primary mineralogy and diagenetic processes. Depositional mineralogy was dominated by quartz, detrital mica, detrital clay (likely Fe-rich 7Å clay and illite–smectite) with minor feldspar and oxide phases. Diagenetic processes included compaction, minor feldspar dissolution and kaolinite growth and the more important processes of chlorite, siderite and quartz cementation, as well as the likely transformation of smectite into illite. Caprock quality is controlled by the primary quantity of illite-muscovite in the sediment and also by the localised extent of chlorite and quartz cementation. Deposition in an estuarine environment led to highly heterogeneous distribution of primary and diagenetic minerals, and thus caprock quality, between and within the samples.  相似文献   

4.
Reservoir quality is a critical risk factor in deep to ultradeep reservoirs at depths >4.5 km. Analysis of Paleogene Wilcox sandstones on the upper Texas Gulf Coast provides insight into the evolution of reservoir quality during shallow to ultradeep burial diagenesis. Reduction of porosity and permeability with burial in Wilcox sandstones was evaluated using subsurface samples from 200 to 6700 m, at temperatures of 25–230 °C. Diagenesis and petrophysical properties were interpreted from petrographic data and core analyses. Wilcox sandstones are mostly lithic arkoses and feldspathic litharenites having an average composition of Q59F22R19. Provenance did not change significantly during Wilcox deposition in this area, nor does average sandstone composition vary among lower, middle, and upper Wilcox sandstones. However, composition does vary with sequence-stratigraphic position; lowstand slope-fan deposits contain more rock fragments than do deposits from highstand or transgressive systems tracts. Given observations from this onshore dataset, Wilcox sandstones deposited in deepwater environments in the Gulf of Mexico are likely to contain more rock fragments than their linked highstand equivalents.  相似文献   

5.
Reservoir quality is a critical risk factor in deep to ultradeep reservoirs at depths >4.5 km. Analysis of Paleogene Wilcox sandstones on the upper Texas Gulf Coast provides insight into the evolution of reservoir quality during shallow to ultradeep burial diagenesis. Reduction of porosity and permeability with burial in Wilcox sandstones was evaluated using subsurface samples from 200 to 6700 m, at temperatures of 25–230 °C. Diagenesis and petrophysical properties were interpreted from petrographic data and core analyses. Wilcox sandstones are mostly lithic arkoses and feldspathic litharenites having an average composition of Q59F22R19. Provenance did not change significantly during Wilcox deposition in this area, nor does average sandstone composition vary among lower, middle, and upper Wilcox sandstones. However, composition does vary with sequence-stratigraphic position; lowstand slope-fan deposits contain more rock fragments than do deposits from highstand or transgressive systems tracts. Given observations from this onshore dataset, Wilcox sandstones deposited in deepwater environments in the Gulf of Mexico are likely to contain more rock fragments than their linked highstand equivalents.  相似文献   

6.
  相似文献   

7.
Bacterial productivity (BP) and respiration (BR) were examined in relation to primary productivity (PP) for the first time in a shallow tropical ecosystem (Cochin Estuary), India. The degree of dependence of BP (6.3–199.7 μg C L−1 d−1) and BR (6.6–430.4 μg C L−1 d−1) on PP (2.1–608.0 μg C L−1 d−1) was found to be extremely weak. The BP/PP (0.05–8.5) and PP/BR (0.02–7.9) ratios widely varied in the estuary depending on the season and location. There was a seasonal shift in net pelagic production from autotrophy to heterotrophy due to terrestrial organic matter input through rivers which enhanced the bacterial heterotrophic activity and very high pCO2 (106–6001 μatm) levels. The heterotrophic zones were characterized by low PP but high bacterial production and respiration leading to oxygen undersaturation and exceptionally high pCO2. We propose that the CO2 supersaturation caused by increased bacterial respiration (in excess of PP) was a result of bacterial degradation of allochthonous organic matter. This indicates that sources other than planktonic compartment need to be explored to understand the C-cycling in this estuary. These results are of particular relevance to tropical ecosystems in general, where the bulk of world's river discharges occur.  相似文献   

8.
A great difference exists between the hydrocarbon charging characteristics of different Tertiary lacustrine turbidites in the Jiyang Super-depression of the Bohai Bay Basin, east China. Based on wireline log data, core observation and thin-section analyses, this study presents detailed reservoir property data and their controlling effects from several case studies and discusses the geological factors that govern the hydrocarbon accumulation in turbidite reservoirs. The lacustrine fluxoturbidite bodies investigated are typically distributed in an area of 0.5–10 km2, with a thickness of 5–20 m. The sandstones of the Tertiary turbidites in the Jiyang Super-depression have been strongly altered diagenetically by mechanical compaction, cementation and mineral dissolution. The effect of compaction caused the porosity to decrease drastically with the burial depths, especially during the early diagenesis when the porosity was reduced by over 15%. The effect of cementation and mineral dissolution during the late-stage diagenesis is dominated by carbonate cementation in sandstones. High carbonate cement content is usually associated with low porosity and permeability. Carbonate dissolution (secondary porosity zone) and primary calcite dissolution is believed to be related to thermal maturation of organic matter and clay mineral reactions in the surrounding shales and mudstone. Two stages of carbonate cementation were identified: the precipitation from pore-water during sedimentation and secondary precipitation in sandstones from the organic acid-dissolved carbonate minerals from source rocks. Petrophysical properties have controlled hydrocarbon accumulation in turbidite sandstones: high porosity and permeability sandstones have high oil saturation and are excellent producing reservoirs. It is also noticed that interstitial matter content affects the oil-bearing property to some degree. There are three essential elements for high oil-bearing turbidite reservoirs: excellent pore types, low carbonate cement (<5%) and good petrophysical properties with average porosity >15% and average permeability >10 mD.  相似文献   

9.
GSWA Harvey 1 was drilled as part of the South West CO2 Geosequestration Hub carbon capture and storage project (South West Hub) to evaluate storage volume, injectivity potential and carbon dioxide retention capacity in the south-western Perth Basin. Six cored intervals from the Triassic Lesueur Sandstone contain nine lithofacies consistent with fluvial depositional environments: the lower Wonnerup Member is dominated by fluvial lithofacies consisting of stacked beds of porous, permeable sandstone deposited as high-energy fill and barforms, with rare finer-grained swampy/overbank deposits. The overlying Yalgorup Member contains mainly floodplain palaeosols with low- to moderate-energy barforms. The high- to moderate-energy fluvial facies typically have a low gamma response and contain clean, medium to very coarse-grained quartz-dominated sandstones. Other clastic components include K-feldspar (8–25%) with trace muscovite, garnet and zircon, and interstitial diagenetic kaolinite (up to 15%) and Fe-rich chlorite (up to 13%). The low-energy facies contain variably interbedded mudstone and thin, moderate to well sorted fine-grained sandstone, typically with a high gamma response, and are consistent with deposition under swampy, overbank and palaeosol conditions. These facies have significantly higher proportions of mica and diagenetic clays, including smectite (up to 8%) and illite (up to 10%), and detrital plagioclase (up to 21%) and trace carbonate bioclasts. High porosity and permeability in the cored intervals of the Wonnerup Member indicate good reservoir characteristics in terms of storage capacity and injectivity at depths relevant to CO2 injection (>1500 m). High porosity and extremely variable permeability values in the Yalgorup Member were measured. The variation is due to permeable vertical sandstone features in low permeability sandy mudstone and indicate limited sealing potential, although the spatial connectivity of the vertical features cannot be resolved from the available core. A preliminary assessment of the area as a CCS site seems favourable; however, the project is only in the early stages of its characterization and far more regional and site-specific data are needed to evaluate how injected CO2 may behave in the subsurface.  相似文献   

10.
The tight sandstones of the Cretaceous Quantou formation are the main exploration target for hydrocarbons in the southern Songliao basin. Authigenic quartz is a significant cementing material in these sandstones, significantly reducing porosity and permeability. For efficient predicting and extrapolating the petrophysical properties within these tight sandstones, the quartz cement and its origin need to be better understood. The tight sandstones have been examined by a variety of methods. The sandstones are mostly lithic arkoses and feldspathic litharenites, compositionally immature with an average framework composition of Q43F26L31, which are characterized by abundant volcanic rock fragments. Mixed-layer illite/smectite (I/S) ordered interstratified with R = 1 and R = 3 is the dominating clay mineral in the studied sandstone reservoirs. Two different types of quartz cementation modes, namely quartz grain overgrowth and pore-filling authigenic quartz, have been identified through petrographic observations, CL and SEM analysis. Homogenization temperatures of the aqueous fluid inclusions indicate that both quartz overgrowths and pore-filling authigenic quartz formed with a continuous process from about 70 °C to 130 °C. Sources for quartz cement produced are the conversion of volcanic fragments, smectite to illite reaction and pressure solution at micro stylolites. Potassium for the illitization of smectite has been sourced from K-feldspar dissolution and albitization. Silica sourced from K-feldspars dissolution and kaolinite to illite conversion is probably only minor amount and volumetrically insignificant. The internal supplied silica precipitate within a closed system where the transport mechanism is diffusion. The quartz cementation can destroy both porosity and permeability, but strengthen the rock framework and increase the rock brittleness effectively at the same time.  相似文献   

11.
Primary production was studied at nine sites distributed within the Strait of Gibraltar (Southern Spain) and North-Western (NW) Alboran Sea by analyzing photosynthesis-irradiance (P–I) relationships and integrated primary production rates in relation to the different types of Deep Chlorophyll Maxima (DCM) detected in the area. The characteristics of the DCM were examined by several methods, including flow cytometry, quantification of transparent expolymer particles and fluorimetric measurements that were applied in order to assess the photo-physiological state of the phytoplankton assemblages with respect to their species composition and water column structure (hydrology). The photosynthetic parameters (derived from P–I relationships) and integrated primary production (range 6–644 mg m−2 d−1) responded greatly to the diverse DCM identified and thereby the spatial variability of the primary production observed in the region was found to depend upon the occurrence of the different types of phytoplankton accumulations, which were themselves indicative of the previous history of the water column. The net contribution of the primary production to the air–sea CO2 exchange process was also evaluated in the area. Results indicated that this region behaved as a net sink for the atmospheric CO2, with the intensity of the flux being strongly modulated by the wind intensity.  相似文献   

12.
The discovery of deep (20,000 ft) gas reservoirs in eolian sandstone of the Upper Jurassic Norphlet Formation in Mobile Bay and offshore Alabama in the late 1970s represents one of the most significant hydrocarbon discoveries in the nation during the past several decades. Estimated original proved gas from Norphlet reservoirs in the Alabama coastal waters and adjacent federal waters is 7.462 trillion ft3 (Tcf) (75% recovery factor). Fifteen fields have been established in the offshore Alabama area. Norphlet sediment was deposited in an arid environment in alluvial fans, alluvial plains, and wadis in updip areas. In downdip areas, the Norphlet was deposited in a broad desert plain, with erg development in some areas. Marine transgression, near the end of Norphlet deposition, resulted in reworking of the upper part of the Norphlet Formation. Norphlet reservoir sandstone is arkose and subarkose, consisting of a simple assemblage of three minerals, quartz, albite, and K-feldspar. The present framework grain assemblage of the Norphlet is dominantly diagenetic, owing to albitization and dissolution of feldspar. Despite the simple framework composition, the diagenetic character of the Norphlet is complex. Important authigenic minerals include carbon ate phases (calcite, dolomite, Fe-dolomite, and breunnerite), feldspar (albite and K-feldspar), evaporite minerals (anhydrite and halite), clay minerals (illite and chlorite), quartz, and pyrobitumen. The abundance and distribution of these miner als varies significantly between onshore and offshore regions of Norphlet production. The lack of sufficient internal sources of components for authigenic minerals, combined with unusual chemical compositions of chlorite (Mg-rich), breunnerite, and some minor authigenic minerals, suggests that Louann-derived fluids influenced Norphlet diagenesis. In offshore Alabama reservoirs, porosity is dominantly modified primary poros ity. Preservation of porosity in deep Norphlet reservoirs is due to a combination of factors, including a lack of sources of cement components and lack of pervasive early cement, so that fluid-flow pathways remained open during burial. Below the dominantly quartz-cemented tight zone near the top of the Norphlet, pyrobitumen is a major contributor to reduction in reservoir quality in offshore Alabama. The highest reservoir quality occurs in those wells where the present gas water contact is below the paleohydrocarbon water contact. This zone of highest reservoir quality is between the lowermost occurrence of pyrobitumen and the present gas water contact.  相似文献   

13.
Rapid supply and deposition of 1000's of meters of Miocene and Pliocene sediment tend to lead to a different set of controls on reservoir quality than older, more slowly buried sandstones. Here we have studied Miocene fluvial-deltaic Bhuban Formation sandstones, from the Surma Group, Bengal Basin, buried to >3,000 m and >110 °C, using a combination of petrographic, geochemical and petrophysical methods in order to understand the controls on Miocene sandstone reservoir quality to facilitate improved prediction of porosity and permeability. The main conclusions of the study are that mechanical compaction processes are the dominant control on porosity-loss although early calcite growth has led to locally-negligible porosity in some sandstones. Mechanical compaction occurred by grain rearrangement, ductile grain compaction and brittle grain fracturing. Calcite cement, occupying up to 41% intergranular volume, was derived from a combination of dissolved and recrystallized bioclasts, an influx of organic-derived carbon dioxide and plagioclase alteration. Clay minerals present include smectite-illite, kaolinite and chlorite. The smectitic clay was probably restricted to low energy depositional environments and it locally diminishes permeability disproportionate to the degree of porosity-loss. Kaolinite is probably the result of feldspar alteration resulting from the influx of organic-derived carbon dioxide. Quartz cement is present in small amounts, despite the relatively high temperature, due to a combination of limited time available in these young sandstones, grain-coating chlorite and low water saturations in these gas-bearing reservoir sandstones. Reservoir quality can now be predicted by considering primary sediment supply and primary depositional environment, the magnitude of the detrital bioclast fraction and the influx of organic-derived carbon dioxide.  相似文献   

14.
The role of coastal lagoons and estuaries as sources or sinks of inorganic carbon in upwelling areas has not been fully understood. During the months of May–July, 2005, we studied the dissolved inorganic carbon system in a coastal lagoon of northwestern Mexico during the strongest period of upwelling events. Along the bay, different scenarios were observed for the distributions of pH, dissolved inorganic carbon (DIC) and apparent oxygen utilization (AOU) as a result of different combinations of upwelling intensity and tidal amplitude. DIC concentrations in the outer part of the bay were controlled by mixing processes. At the inner part of the bay DIC was as low as 1800 μmol kg−1, most likely due to high water residence times and seagrass CO2 uptake. It is estimated that 85% of San Quintín Bay, at the oceanic end, acted as a source of CO2 to the atmosphere due to the inflow of CO2-rich upwelled waters from the neighboring ocean with high positive fluxes higher than 30 mmol C m−2 d−1. In contrast, there was a net uptake of CO2 and HCO3− by the seagrass bed Zostera marina in the inner part of the bay, so the pCO2 in this zone was below the equilibrium value and slightly negative CO2 fluxes of −6 mmol C m−2 d−1. Our positive NEP and ΔDIC values indicate that Bahía San Quintín was a net autotrophic system during the upwelling season during 2005.  相似文献   

15.
The Upper Cretaceous Mesaverde Group in the Piceance Basin, western Colorado, contains thick sections of low porosity, low permeability sandstones that are reservoirs for large accumulations of hydrocarbon gas. The Mesaverde sandstones are lithic arkoses and feldspathic litharenites, containing quartz, plagioclase, variable K-feldspar, chert, and volcanic rock fragments. Important diagenetic processes that have affected the sandstones include compaction, dissolution of feldspar and/or alteration to clay, precipitation of carbonate and quartz cements, precipitation of illite, and alteration of detrital clays (mixed-layer illite–smectite). Porosity is relatively constant; a decrease in primary porosity downward is approximately balanced by an increase in secondary porosity, with significant microporosity in authigenic and diagenetic clays. K-feldspar is almost completely absent below 5500 feet (1675 m). Fibrous illite is relatively abundant above this depth and variable in abundance below. The K–Ar ages of the clays increase with depth, from 40 m.y. at the top of the sampled section to 55 m.y. at the base, indicating illitization of a precursor smectite at approximately the 100 °C isotherm. Samples with abundant fibrous illite have relatively smaller age values. Mass balance calculations indicate that dissolution of K-feldspar, illitization of smectite and precipitation of fibrous illite were coupled. These reactions suggest the transport of dissolved potassium upward hundreds of feet (100–300 m) in the section, possibly associated with water driven vertically by the migration of gas.  相似文献   

16.
Tight-gas reservoirs, characterized by low porosity and low permeability, are widely considered to be the product of post-depositional, diagenetic processes associated with progressive burial. This study utilizes a combination of thin section petrography, scanning electron microscopy, microprobe and back scatter electron analysis, stable isotope geochemistry and fluid inclusion analysis to compare the diagenetic history, including porosity formation, within sandstones of the second member of Carboniferous Taiyuan Formation (C3t2) and the first member of Permian Xiashihezi Formation (P1x1) in the Ordos Basin in central China.In the P1x1 member, relatively high abundances of metamorphic rock fragments coupled with a braided river and lacustrine delta environment of deposition, produced more smectite for transformation to illite (50–120 °C). This reaction was driven by dissolution of unstable minerals (K-feldspar and rock fragments) during the early to middle stages of mesodiagenesis and consumed all K-feldspar. Abundant intragranular porosity (average values of 2.8%) and microporosity in kaolinite (average values of 1.5%) formed at these burial depths with chlorite and calcite developed as by-products.In the C3t2 member, relatively low abundances of metamorphic rock fragments coupled with an incised valley-coastal plain environment of deposition resulted in less smectite for transformation to illite. High K+/H+ ratios in the early pore waters related to a marine sedimentary environment of deposition promoted this reaction. Under these conditions, K-feldspar was partially preserved. During the middle to late stages of mesodiagenesis, K-feldspar breakdown produced secondary intragranular (average values of 1.4%) and intergranular pores (average values of 1.2%). Release of K+ ions promoted illitization of kaolinite with quartz overgrowths and ferrous carbonates developed as by-products.This study has demonstrated that whereas both members are typical tight-gas sandstones, they are characterized by quite different diagenetic histories controlled by the primary detrital composition, especially during mesodiagenesis. Types of secondary porosity vary between the two members and developed at different stages of progressive burial. The content of unstable detrital components, notably feldspar, was the key factor that determined the abundance of secondary porosity.  相似文献   

17.
The assessment of gas origin in mud volcanoes and related petroleum systems must consider post-genetic processes which may alter the original molecular and isotopic composition of reservoir gas. Beyond eventual molecular and isotopic fractionation due to gas migration and microbial oxidation, investigated in previous studies, we now demonstrate that mud volcanoes can show signals of anaerobic biodegradation of natural gas and oil in the subsurface. A large set of gas geochemical data from more than 150 terrestrial mud volcanoes worldwide has been examined. Due to the very low amount of C2+ in mud volcanoes, isotopic ratios of ethane, propane and butane (generally the best tracers of anaerobic biodegradation) are only available in a few cases. However, it is observed that 13C-enriched propane is always associated with positive δ13CCO2 values, which are known indicators of secondary methanogenesis following anaerobic biodegradation of petroleum. Data from carbon isotopic ratio of CO2 are available for 134 onshore mud volcanoes from 9 countries (Azerbaijan, Georgia, Ukraine, Russia, Turkmenistan, Trinidad, Italy, Japan and Taiwan). Exactly 50% of mud volcanoes, all releasing thermogenic or mixed methane, show at least one sample with δ13CCO2 > +5‰ (PDB). Thermogenic CH4 associated with positive carbon isotopic ratio of CO2 generally maintains its δ13C-enriched signature, which is therefore not perturbed by the lighter secondary microbial gas. There is, however, high variability in the δ13CCO2 values within the same mud volcanoes, so that positive δ13CCO2 values can be found in some vents and not in others, or not continuously in the same vent. This can be due to high sensitivity of δ13CCO2 to gas–water–rock interactions or to the presence of differently biodegraded seepage systems in the same mud volcano. However, finding a positive δ13CCO2 value should be considered highly indicative of anaerobic biodegradation and further analyses should be made, especially if mud volcanoes are to be used as pathfinders of the conditions indicative of subsurface hydrocarbon accumulations in unexplored areas.  相似文献   

18.
Measurements of pCO2, pH and alkalinity in the surface waters of an iron fertilised patch of sub-Antarctic water were made during SAGE (SOLAS SAGE: Surface-Ocean Lower Atmosphere Studies Air-Sea Gas Experiment). The iron addition induced a minor phytoplankton bloom, however the patch dynamics were dominated by physical processes which suppressed and masked the biological effects. The Lagrangian nature of the experiment allowed the carbonate chemistry in the patch to be followed for 15.5 days, and the relative importance of the biological and physical factors influencing the surface water pCO2 was estimated. The pCO2 of the surface waters of the patch increased from 327 ??atm prior to iron addition to 338 ??atm on Day 14, effects of vertical and horizontal mixing offset the 15 ??atm drawdown that would have occurred had the induced biological uptake been the sole factor to influence the pCO2. The air-sea carbon flux calculated using the measured skin temperature and a piston velocity parameterisation determined during SAGE (Ho et al., 2006) was 98.5% of the flux determined using conventional bulk temperature measurement and the Wanninkhof (1992) piston velocity parameterisation. The skin temperature alone contributed to an 8% increase in the flux compared with that determined using bulk temperature.  相似文献   

19.
盐城凹陷天然气储层为成分成熟度很低的砂砾岩、砾状砂岩、砂岩和少量粉砂岩,砂岩类型主要为长石岩屑砂岩和少量岩屑长石砂岩。成岩矿物主要类型有粘土矿物、石英、钠长石、碳酸盐、硬石膏和石膏等。储层以次生孔隙发育为特点,以粒间孔隙和骨架颗粒溶孔最为发育,溶解作用发育程度与泥质岩在成岩过程中粘土矿物和有机质的演化关系极其密切。盐城天然气进入储层发生在始新世———新近纪,主要成藏期发生在4.5~10Ma。天然气储层成岩演化阶段处于晚成岩A亚期。储层性质明显地受到沉积相和成岩作用的影响。沉积物粒度较粗、厚度较大的河道砂的储集物性明显优于各种粒度较细、厚度较薄的席状砂体。  相似文献   

20.
An improved model is presented for the calculation of the solubility of carbon dioxide in aqueous solutions containing Na+, K+, Ca2+, Mg2+, Cl−, and SO42− in a wide temperature–pressure–ionic strength range (from 273 to 533 K, from 0 to 2000 bar, and from 0 to 4.5 molality of salts) with experimental accuracy. The improvements over the previous model [Duan, Z. and Sun, R., 2003. An improved model calculating CO2 solubility in pure water and aqueous NaCl solutions from 273 to 533K and from 0 to 2000 bar. Chemical Geology, 193: 257–271] include: (1) By developing a non-iterative equation to replace the original equation of state in the calculation of CO2 fugacity coefficients, the new model is at least twenty times computationally faster and can be easily adapted to numerical reaction-flow simulator for such applications as CO2 sequestration and (2) By fitting to the new solubility data, the new model improved the accuracy below 288 K from 6% to about 3% of uncertainty but still retains the high accuracy of the original model above 288 K. We comprehensively evaluate all experimental CO2 solubility data. Compared with these data, this model not only reproduces all the reliable data used for the parameterization but also predicts the data that were not used in the parameterization. In order to facilitate the application to CO2 sequestration, we also predicted CO2 solubility in seawater at two-phase coexistence (vapor–liquid or liquid–liquid) and at three-phase coexistence (CO2 hydrate–liquid water–vapor CO2 [or liquid CO2]). The improved model is programmed and can be downloaded from the website http://www.geochem-model.org/programs.htm.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号