共查询到20条相似文献，搜索用时 31 毫秒
1.
渤中坳陷及邻区构造分带变形特征 总被引：1，自引：0，他引：1
根据渤中坳陷及邻区的平面构造分布特征、剖面构造特征和布格重力异常等方面的资料分析,认为渤中坳陷及邻区构造具有分带性,从西向东可分为3个带:(1)西部凸起带:发育大量的凸起和断裂,凸起和凸起之间以小凹陷相隔,布格重力异常呈不规则团块状;(2)中部凹陷带:由渤中凹陷和辽中凹陷组成,很少发育凸起和断裂,布格重力异常呈等轴斑块状、椭圆状;(3)东部凸起带:由大量的凸起和凹陷相间组成,由于郯庐断裂的影响形成大量的断层,主要为走滑断裂及分支断裂,布格重力异常主要呈线状分布。这种构造分带性受郯庐断裂带的多期构造活动控制,对油气分布具有重要的影响,目前西部凸起带和东部凸起带由于长期处于构造的较高部位,已成为有利的油气勘探区。 相似文献
2.
Cenozoic structures in the Bohai Bay basin province can be subdivided into eleven extensional systems and three strike-slip systems. The extensional systems consist of normal faults and transfer faults. The normal faults predominantly trend NNE and NE, and their attitudes vary in different tectonic settings. Paleogene rifting sub-basins were developed in the hanging walls of the normal faults that were most likely growth faults. Neogene–Quaternary sequences were deposited in both the rifting sub-basins and horsts to form a unified basin province. The extensional systems were overprinted by three NNE-trending, right-lateral strike-slip systems (fault zones). Although the principal displacement zones (PDZ) of the strike-slip fault zones are developed only in the basement and lower basin sequences in some cross sections, the structural deformation characteristics of the upper basin sequences also indicate that they are basement-involved, right-lateral strike-slip fault zones. According to the relationships between faults and sedimentary sequences, the extensional systems were mainly developed from the middle Paleocene to the late Oligocene, whereas the strike-slip systems were mainly developed from the Oligocene to the Miocene. Strike-slip deformation was intensified as extensional deformation was weakened. Extensional deformation was derived from horizontal tension induced by upwelling of hot mantle material, whereas strike-slip deformation was probably related to a regional stress field induced by plate movement. 相似文献
3.
《Marine and Petroleum Geology》2012,37(1):140-153
The conventional interpretation of the Jurassic–Lower Cretaceous succession in the Porcupine Basin suggests an extensional setting with progressive deepening of the basin. However, well data show a prominent gap of several million years between the Upper Jurassic and Lower Cretaceous. A data base of 15 key wells and approximately 5,000 km of seismic reflection data were examined in the northern Porcupine Basin, in order to understand the nature, controls and mechanisms of this unconformity. Seven seismic markers, constrained by well data, are mapped. It is shown that during the Late Jurassic (possibly the Oxfordian–Kimmeridgian), the basin experienced extension and synrift deposition. During the latest Jurassic–earliest Cretaceous (possibly the Tithonian–early Berriasian), a series of north-trending structural highs and lows developed and extensive areas in the northern Porcupine Basin experienced folding, uplift and erosion. Evidence from the study suggests that compression, uplift and erosion played an important role in the shaping of the depositional and structural architecture of the basin and caused formation of the regional Base Cretaceous Unconformity in the northern basin. It is suggested that the deformation in the northern Porcupine Basin during the latest Jurassic–earliest Cretaceous may be related to the initial closure of the Alpine Tethys during the late Tithonian. This tectonic event may also have resulted in compressional deformation and formation of the Base Cretaceous Unconformity elsewhere in Western Europe. 相似文献
4.
The Cumuruxatiba basin is located in the central portion of the eastern Brazilian margin surrounded by Cenozoic magmatic highs that belong to the Abrolhos Magmatic Complex. This basin was formed by rifting, in the Neocomian followed by thermal subsidence during late Cretaceous like other basins along the Eastern Brazilian margin. In the Cenozoic, the Abrolhos magmatism took place as sills and dykes intruded the sedimentary section, primarily during the Paleogene. In that time, there was a strong NS contractional deformation in the basin represented by folds related to reverse faults coeval with Abrolhos magmatism activity. The structural restorations of regional 2D seismic sections revealed that most of the contractional deformation was concentrated at the beginning of the Cenozoic with maximum peak at the Eocene (up to 33% of total shortening and rate of 6 km/Ma). The Post-Eocene period was marked by a decrease in the strain rate that continues to the present day (around 4 km/Ma to less than 1). 3D structural modelling exhibited a major, well-developed E–W to NE–SW fold belt that accommodated most of the contractional Cenozoic deformation between Royal Charlotte and Sulphur Minerva magmatic highs. Volcanic eruptions and magmatic flows from the Abrolhos complex resulted in differential overburden on edge of the basin, acting as a trigger for halokinesis and the subsequent formation of fault-related folds. In general, such structures were developed close to adjacent magmatic highs, commonly exhibiting vergence towards the centre of the basin. Some magmatic features formed coeval with Cenozoic syn-deformation sediments clearly indicate that Abrolhos magmatism activity and contractional deformation development were associated. The study of the thickness variation of the syn-deformation section in relation to fault-related folds on deformation maps and maximum strain diagrams revealed that most folds were activated and re-activated several times during the Cenozoic without a systematic kinematic pattern. This lack of systematic deformation might be related to the variation of the magmatic pulse activity of adjacent magmatic highs resulting in a complex interference pattern of Cenozoic folds. These structural interpretations of the timing of fault-related folds that are potential Cenozoic traps in the Cumuruxatiba basin play a fundamental role in petroleum systems and exploration of low-risk hydrocarbon prospects. 相似文献
5.
Monika Hölzel Kurt Decker András Zámolyi Philipp Strauss Michael Wagreich 《Marine and Petroleum Geology》2010
The tectonic evolution of the Vienna Basin overlying the Alpine-Carpathian fold and thrust belt includes two stages of distinct basin subsidence and deformation. The earlier phase contemporaneous with thrusting of the Alpine-Carpathian floor thrust is related to the formation of a wedge-top basin (“piggy-back”), which was connected to the evolving foreland basin (Lower Miocene; c. 18.5–16 Ma). This stage is followed by the formation of a pull-apart basin (Middle to Upper Miocene; c. 16–8 Ma). Sediments of the latter unconformably overly wedge-top basin strata and protected them against erosion. 相似文献
6.
The Wilkes fracture zone offsets the East Pacific Rise about 200 km right-laterally near 9°S. The bathymetric expression of the fracture zone ranges from a simple slope or step along its inactive extension to a 100 km wide zone of oblique structural features in the active portion. A low ridge 200 to 300 m high, 5 to 15 km wide and 185 km long is the dominant oblique structure; it trends 23° north of the main transform trend. A high-amplitude magnetic anomaly trends 097° along the southern part of the active portion and apparently marks the main transform direction. The structurally simple, inactive portions of the Wilkes fracture zone trend 105°. Plots of epicenter locations reveal two groupings of earthquakes, one along an 082° trend in the central part of the fracture zone, and a cluster near the southwestern fracture zone — spreading center intersection.Taken together the data suggest that some event, other than a shift in the Nazca-Pacific pole of rotation, occurred 0.9 m.y. ago to change the Wilkes fracture zone from a simple fault to a complex zone of shearing. Since that time the long oblique ridge, probably the surface expression of a Riedel shear, was formed. At present the entire 200 km long, 100 km wide region between the offset axes is seismically active, but transform motion may be largely confined to the southern margin of the active zone, coincident with the high-amplitude magnetic anomaly there. 相似文献
7.
1Intraduction Foldsinconsolidatedstrataareoftendocumen ted.Butfoldsinloosely consolidatedsedimentsare rarelydiscussed,probablybecauseofthefollowings:(1)folddeformationsinloosely consolidatedsedi mentsareweakortheyhavebeendestroyed;(2)tectonicactivityhasbe… 相似文献
8.
Structural controls on the formation of BSR over a diapiric anticline from a dense MCS survey offshore southwestern Taiwan 总被引：1，自引：0，他引：1
Philippe Schnürle Char-Shine Liu Andrew T. Lin Saulwood Lin 《Marine and Petroleum Geology》2011,28(10):1932-1942
A dense seismic reflection survey with up to 250-m line-spacing has been conducted in a 15 × 15 km wide area offshore southwestern Taiwan where Bottom Simulating Reflector is highly concentrated and geochemical signals for the presence of gas hydrate are strong. A complex interplay between north–south trending thrust faults and northwest–southeast oblique ramps exists in this region, leading to the formation of 3 plunging anticlines arranged in a relay pattern. Landward in the slope basin, a north–south trending diapiric fold, accompanied by bright reflections and numerous diffractions on the seismic profiles, extends across the entire survey area. This fold is bounded to the west by a minor east-verging back-thrust and assumes a symmetric shape, except at the northern and southern edges of this area, where it actively overrides the anticlines along a west-verging thrust, forming a duplex structure. A clear BSR is observed along 67% of the acquired profiles. The BSR is almost continuous in the slope basin but poorly imaged near the crest of the anticlines. Local geothermal gradient values estimated from BSR sub-bottom depths are low along the western limb and crest of the anticlines ranging from 40 to 50 °C/km, increase toward 50–60 °C/km in the slope basin and 55–65 °C/km along the diapiric fold, and reach maximum values of 70 °C/km at the southern tip of the Good Weather Ridge. Furthermore, the local dips of BSR and sedimentary strata that crosscut the BSR at intersections of any 2 seismic profiles have been computed. The stratigraphic dips indicated a dominant east–west shortening in the study area, but strata near the crest of the plunging anticlines generally strike to southwest almost perpendicular to the direction of plate convergence. The intensity of the estimated bedding-guided fluid and gas flux into the hydrate stability zone is weaker than 2 in the slope basin and the south-central half of the diapiric fold, increases to 7 in the northern half of the diapiric fold and plunging anticlines, and reaches a maximum of 16 at the western frontal thrust system. Rapid sedimentation, active tectonics and fluid migration paths with significant dissolved gas content impact on the mechanism for BSR formation and gas hydrate accumulation. As we begin to integrate the results from these studies, we are able to outline the regional variations, and discuss the importance of structural controls in the mechanisms leading to the gas hydrate emplacements. 相似文献
9.
A numerical study of transport dynamics and seasonal variability of the Yellow River sediment in the Bohai and Yellow seas 总被引：3，自引：0，他引：3
A sediment numerical model was embedded into a wave-tide-circulation coupled model to simulate the transport processes of the Yellow River-derived sediment considering the wave-induced vertical mixing (Bv) and the wave-current coupled bottom shear stress (BSS). Numerical results show that the main stream of the Yellow River-derived sediment moves first eastward off the northern Shandong Peninsula and then southward into the South Yellow Sea all year round. In spring, the sediment moves northeastward in the Bohai Sea. In summer, there is a northeastward branch of sediment in the Bohai Sea off the west coast of the Liaodong Peninsula, while the main part goes eastward to the Yellow Sea. The Yellow River-derived sediment transport from the Bohai Sea to the North Yellow Sea across the Bohai Strait is mainly limited to the top 10 m, and with a maximum centered at 37.9°N in summer. The transport from the North Yellow Sea to the South Yellow Sea across the transect of 37°N is mainly in the 0–30 m layer with a maximum around 123.7°E in autumn. The simulated Yellow River-discharged sediment deposits along the Shandong Peninsula and between 20 and 30 m isobaths in the Yellow Sea, which is consistent with observation. If surface waves are not considered in the model, the sediment deposits westward to the nearshore area in the South Yellow Sea. The sediment would deposit further southward in the numerical experiment results without wind influence. In the numerical experiment of no tide, there is hardly any sediment deposited on the Yellow Sea floor, while in the Bohai Sea most of the sediment is transported southward and northwestward around the river mouth instead of eastward as in the Control Run, indicating the tides play a key role in forming the deposition pattern. 相似文献
10.
Role of the shale tectonics on the evolution of the Eastern Venezuelan Cenozoic thrust and fold belt
This paper presents a structural and stratigraphic analysis of the foreland-fold-belt of the Eastern Venezuelan Basin and the main conclusions about shale tectonic mechanisms in the area. The deformation of the foreland-fold-belt has been investigated analyzing the growth strata architecture preserved on the structure fold limbs. Three contractional episodes are proposed for the Eastern Venezuelan Basin: 1) Oligocene to middle Miocene, 2) late Miocene to Pliocene and 3) Pleistocene. The first episode produced contractional listric faults inside the shale and long displacement blind thrusts in the underlying Cretaceous units. The second episode produced the deformation of the Cenozoic strata into overlapping east-west-trending, convex northward anticlines that covers more than 200 kilometers in length and 40 kilometers wide, break-through normal faults product of a high sedimentary load that overcomes contraction and the formation of short-displacement blind thrusts in the underlying Cretaceous units. The last episode is related to an oblique compression and the formation of high angle extensional faults with dextral movement and NW-SE strike. The role of the shale tectonics in the evolution implies that shale deforms in two stages: 1) folding and 2) normal faulting of the crest of the anticline (Break through normal faulting). Folding controlled the sediment distribution during most of the Neogene strata, while the normal faulting of the anticlines represent basin potential for hydrocarbon. The best potential hydrocarbon plays in the basin are related to oblique-collision restricted basins and controlled by break-through normal faults and the presence of NW-SE strike faults that connect the HC source with the reservoirs. Results from this research imply that the role of sedimentation is fundamental for the overburden sand distribution and tectonic constrain of the folds. 相似文献
11.
ANGUS photographs and ALVIN observational data from Fracture Zones A and B on the Mid-Atlantic Ridge near 37°N were examined for structural and sedimentological indications of the area's tectonics. Both transform fault zones are characterized by volcanic rubble, breccias, chalks, and undisturbed sediments typical of slow-slipping transforms.The photographic data consist of 16 camera-sled traverses from the FAMOUS Expedition using the ANGUS deep-towed camera system. These data cover several different morphotectonic provinces along the strike of both slow-slipping (2 cm yr-1) fracture zones. ALVIN data come from two dives in the central part of Fracture Zone B. The two fracture zones differ in their distribution of fractured and sheared chalks which indicate regions of strike-slip deformation along the transform. Evidence of shearing is confined to a very narrow region in the center of FZ A, whereas the zone of shear deformation is as much as 6 km wide across FZ B. Other differences include the morphology and depth of the transform valleys and their contiguous nodal basins and the extent of exposures of fresh-looking volcanic ridges in the nodal basin. 相似文献
12.
Detailed structural interpretation of the recently acquired deep seismic multichannel profiles along the Iberian Atlantic Margins (IAM Project) provides new results on the geodynamic evolution of the eastern part of the Azores-Gibraltar plate boundary. Thrusting and folding of the oceanic basement and of Mesozoic and Cenozoic sedimentary cover of the Gorringe Bank region are consistent with the N–S convergence of Iberia and Africa. Compressive structures in the Gorringe Bank region are spread over a wide area. Deformation under compression took place mainly in Tertiary times, as is evidenced by a basal unconformity and several discontinuities in Tertiary sediments, although some deformation has also been recorded in Quaternary sediments. The compressive structures in the Gulf of Cadiz are E–W oriented thrusts, folds and related diapiric structures. N–S oriented transpressive deformation is likely to occur in the western Portuguese platform. There is no continuity of structures from the oceanic to the continental domain, suggesting that deformation transfers from one side to the other through a transcurrent fault zone. The fault contact between the two domains is located in the ocean-continent transition zone. 相似文献
13.
Multichannel seismic reflection profiles across the Sunda Trench slope off central Sumatra reveal details of subduction zone structure. Normal faults formed on the outer ridge of the trench offset deep strate and the oceanic crust, but die out upsection under the trench sediments. At the base of the inner trench slope, shallow reflectors are tilted seaward, while deeper reflectors dip landward parallel to the underlying oceanic crustal reflector. Intermediate depth reflectors can be traced landward through a seaward-dipping monocline. We interpret this fold as the shallow expression of a landward-dipping thrust fault at depth. Landward of this flexure, relatively undeformed strata have been stripped off the oceanic plate, uplifted 700 meters, and accreted to the base of the slope. The oceanic crust is not involved in the deformation at the toe of the slope, and it can be observed dipping landward about 25 km under the toe of the accretionary prism.The middle portion of the trench slope is underlain by deformed accreted strata. Shallow reflectors define anticlinal structures, but coherent deep reflectors are lacking. Reflectors 45 to 55 km landward of the base of the slope dip 4°-5° landward beneath a steep slope, suggesting structural imbrication.A significant sediment apron is absent from the trench slope. Instead, slope basins are developed in 375–1500 m water depths, with an especially large one at about 1500 m water depth that is filled with more than 1.1 seconds of relatively undeformed sediments. The seaward flank of the basin has recently been uplifted, as indicated by shallow landward-dipping reflectors. Earlier periods of uplift also appear to have coincided with sedimentation in this basin, as indicated by numerous angular unconformities in the basin strata.Contribution of the Scripps Institution of Oceanography, new series. 相似文献
14.
The Malay Basin is located offshore West Malaysia in the South China Sea, within north central region of 1st order Sunda Block. The basin developed partly as a result of tectonic collisions and strike-slip shear of the Southeast Asia continental slabs, as the Indian Plate collided into Eurasia, and subsequent extrusion of lithospheric blocks towards Indochina. The Sunda Block epicontinental earliest rift margins were manifested by the Palaeogene W–E rift valleys, which formed during NW–SE sinistral shear of the region. Later Eocene NW–SE dextral shear of (2nd order) Indochina Block against East Malaya Block rifted open a 3rd order Malay Basin. Developed within it is a series of 4th order N–S en-echelon ridges and grabens. The grabens and some ridges, sequentially, host W–E trending 5th order folds of later compressional episodes. The Malay Basin Ridge and Graben Model explains the multi-phased structural deformation which started with, the a) Pre-Rift Palaeo/Mesozoic crystalline/metamorphic Basement, b) Synrift phase during Paleogene, c) Fast Subsidence from Late Oligocene to Middle Miocene, d) Compressional inversion of first Sunda fold during Late Miocene, and e) Basin Sag during Plio-Pleistocene with mild compressional episodes. The subsequent Mio-Pliocene folding history of Malay Basin is connected to the collision of Sunda Block against subducting Indian–Australian Plate. This Neogene Sunda tectonics, to some degree after the cessation of South China Sea spreading, is due to the diachronous collision along the 1st order plate margins between SE Asia and Australia. 相似文献
15.
渤海海域构造应力场演化及其在油气聚集中的作用 总被引：3，自引：0，他引：3
渤海海域位于渤海湾盆地东部,在盆地区域动力学背景下,形成了渤海海域特征的沉积和构造环境。渤海海域新生代具有早期断陷、后期拗陷的特点,断裂以NE—NNE走向为主,其次是EW走向,再次是NW走向。通过区域构造演化和沉积体系的深入研究,将海域新生代地质构造活动按构造应力的方向、大小和其他构造形变参数划分为4个期次:①古新世;②始新世—渐新世;③中新世—早更新世;④晚更新世至今。在一系列构造演化过程中,构造应力场的变化对海域内的3组主要断裂具有重要的影响。不同方向的断裂在不同阶段应力场的作用下,所表现的特征和对油气的控制作用是不同的,尤其是NNE—NE向断裂在构造演化过程中多次具有走滑活动,油气主要聚集在走滑作用所派生的局部圈闭或附近存在的构造弱化带中。 相似文献
16.
Regional structure and tectonic history of the obliquely colliding Columbus foreland basin, offshore Trinidad and Venezuela 总被引：1，自引：0，他引：1
Emilio Garciacaro 《Marine and Petroleum Geology》2011,28(1):126-148
Cenozoic eastward migration of the Caribbean plate relative to the South American plate is recorded by an 1100-km-long Venezuela-Trinidad foreland basin which is oldest in western Venezuela (65-55 Ma), of intermediate age in eastern Venezuela (34-20 Ma) and youngest beneath the shelf and slope area of eastern offshore Trinidad (submarine Columbus basin, 15.0 Ma-Recent). In this study of the regional structure, fault families, and chronology of faulting and tectonic events affecting the hydrocarbon-rich Columbus foreland basin of eastern offshore Trinidad, we have integrated approximately 775 km of deep-penetration 2D seismic lines acquired by the 2004 Broadband Ocean-Land Investigations of Venezuela and the Antilles arc Region (BOLIVAR) survey, 325 km of vintage GULFREX seismic data collected by Gulf Oil Company in 1974, and published industry well data that can be tied to some of the seismic reflection lines. Top Cretaceous depth structure maps in the Columbus basin made from integration of all available seismic and well data define for the first time the elongate subsurface geometry of the 11-15 km thick and highly asymmetrical middle Miocene-Recent depocenter of the Columbus basin. The main depocenter located 150-200 km east of Trinidad and now the object of deepwater hydrocarbon exploration is completely filled by shelf and deepwater sediments derived mainly from the Orinoco delta. The submarine Darien ridge exhibits moderate (20-140 m) seafloor relief, forms the steep (12°-24°), northern structural boundary of the Columbus basin, and is known from industry wells to be composed of 0.5-4.5 km thick, folded and thrust-imbricated, hydrocarbon-bearing section of Cretaceous and early Tertiary limestones and clastic rocks. The eastern and southern boundaries of the basin are formed by the gently (1.7°-4.5°), northward-dipping Cretaceous-Paleogene passive margin of South America that is in turn underlain by Precambrian rocks of the Guyana shield.Interpretation of seismic sections tied to wells reveals the following fault chronology: (1) middle Miocene thrusting along the Darien ridge related to highly oblique convergence between the Caribbean plate and the passive margin of northern South America; continuing thrusting and transpression in an oblique foreland basin setting through the early Pleistocene; (2) early Pliocene-recent low-angle normal faults along the top of the Cretaceous passive margin; these faults were triggered by oversteepening related to formation of the downdip, structurally and bathymetrically deeper, and more seaward Columbus basin; large transfer faults with dominantly strike-slip displacements connect gravity-driven normal faults that cluster near the modern shelf-slope break and trend in the downslope direction; to the south no normal faults are present because the top Cretaceous horizon has not been oversteepened as it is adjacent to the foreland basin; (3) early Pliocene-Recent strike-slip faults parallel the trend of the Darien ridge and accommodate present-day plate motions. 相似文献
17.
During compressive events, deformation in sedimentary basins is mainly accommodated by thrust faulting and related fold growth. Thrust faults are generally rooted in the basement and may act as conduits or barriers for crustal fluid flow. Most of recent studies suggest that fluid flow through such discontinuities is not apparent and depends on the structural levels of the thrust within the fold-and-thrust belt.In order to constrain the paleofluid flow through the Jaca thrust-sheet-top basin (Paleogene southwest-Pyrenean fold-and-thrust belt) this study compares on different thrust faults located at different structural levels. The microstructures in the different fault zones studied are similar and consist of pervasive cleavage, calcite shear veins (SV1), extension veins (EV1) and late dilatation veins (EV3). In order to constrain the nature and the source of fluids involved in fluid-rock interactions within fault zones, a geochemical approach, based on oxygen and carbon stable isotope and trace element compositions of calcite from different vein generations and host rocks was adopted. The results suggest a high complexity in the paleohydrological behaviors of thrust faults providing evidence for a fluid-flow compartmentalization within the basin. Previous studies in the southern part of the Axial Zone (North of the Jaca basin) indicates a circulation of deep metamorphic water, probably derived from the Paleozoic basement, along fault zones related to the major basement Gavarnie thrust. In contrast, in northern part of the Jaca basin, the Monte Perdido thrust fault is affected by a closed hydrological fluid system involving formation water during its activity. The Jaca and Cotiella thrust faults, in turn, both located more to the south in the basin, are characterized by a composite fluid flow system. Indeed, stable isotope and trace element compositions of the first generations of calcite veins suggest a relatively closed paleohydrological system, whereas the late calcite vein generations, which are probably associated with the late tectonic activity of the basin, support a contribution of both meteoric and marine waters. Based on these results, a schematic fluid-flow model is presented. This model allows visualization of three main fluid flow compartments along a N–S transect. 相似文献
18.
H. L. Davies J. B. Keene K. Hashimoto M. Joshima J. E. Stuart D. L. Tiffin 《Geo-Marine Letters》1987,6(4):181-191
The floor of the western Solomon Sea (for new bathymetric map see inside back cover of this issue) is dominated by the arched and ridged basement of the Solomon Sea Basin, the partly-sediment-filled New Britain Trench, and a more completely filled trench, the Trobriand Trough. There is a deep basin where the trenches join (149° Embayment), and a silled basin west of the New Britain Trench (Finsch Deep). Submarine canyons descend from the west and south to the 149° Embayment. Abyssal fans and plains are structurally defined and locally disturbed by young faults. Probable submerged pinnacle reefs stand in water depths as great as 1,200 m. 相似文献
19.
Ho-Shing Yu 《Marine Geophysical Researches》2004,25(1-2):109-122
Marine seismic reflection profiles from offshore SW Taiwan combined with onland geological data are used to investigate the distribution and nature of the deformation front west of Taiwan. Locations of the frontal structure west of Taiwan are generally connected in a linear fashion, although the alignment of frontal structures is offset by strike-slip faults. The deformation front begins from the northern Manila Trench near 21°N and continues northward along the course of the Penghu Submarine Canyon in a nearly N–S direction north of 21°N until it reaches the upper reaches of Penghu Canyon at about 22°15′N. The deformation front then changes direction sharply to the northeast. It connects to the Chungchou thrust fault or the Tainan anticline in the coastal plain and continues northwards along the outer Western Foothills to the northern coast of Taiwan near 25°N. Characteristics of structural style, strain regime, sedimentation and tectonics vary along the trend of the deformation front. Ramp anticlines, diapiric intrusion and incipient thrust faults are commonly associated with the deformation front. Variations in structural style along strike can be related to different stages of oblique collision in Taiwan. The deformation front (collision front) west of Taiwan can be considered as a boundary between contraction in the Taiwan orogen and extension west of the collision zone. The deformation front east of the Tainan Basin and its northward extension along the outer limit of the Western Foothills is the surface trace separating the foreland thrust belt from the nearby foredeep, not a boundary between the Chinese and Taiwan margins. The submarine deformation front off SW Taiwan is the surface trace separating the submerged Taiwan orogenic wedge from the Chinese passive continental margin, not a surface trace of the plate boundary between the Eurasian and Philippine Sea plates. 相似文献
20.