首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 26 毫秒
1.
We present a Raman spectroscopic study of the structural modifications of several olivines at high pressures and ambient temperature. At high pressures, the following modifications in the Raman spectra are observed: 1)?in Mn2GeO4, between 6.7 and 8.6?GPa the appearance of weak bands at 560 and 860?cm?1; between 10.6 and 23?GPa, the progressive replacement of the olivine spectrum by the spectrum of a crystalline high pressure phase; upon decompression, the inverse sequence of transformations is observed with some hysteresis in the transformation pressures; this sequence may be interpreted as the progressive transformation of the olivine to a spinelloid where Ge tetrahedra are polymerized, and then to a partially inverse spinel; 2)?in Ca2SiO4, the olivine transforms to larnite between 1.9 and 2.1?GPa; larnite is observed up to the maximum pressure of 24?GPa and it can partially back-transform to olivine during decompression; 3)?in Ca2GeO4, the olivine transforms to a new structure between 6.8 and 8?GPa; the vibrational frequencies of the new phase suggest that the phase transition involves an increase of the Ca coordination number and that Ge tetrahedra are isolated; this high pressure phase is observed up to the maximum pressure of 11?GPa; during decompression, it transforms to a disordered phase below 5?GPa; 4)?in CaMgGeO4, no significant modification of the olivine spectrum is observed up to 15?GPa; between 16 and 26?GPa, broadening of some peaks and the appearance of a weak broad feature at 700–900?cm?1 suggests a progressive amorphization of the structure; near 27?GPa, amorphization is complete and an amorphous phase is quenched down to ambient pressure; this unique behaviour is interpreted as the result of the incompatibilities in the high pressure behaviour of the Ca and Mg sublattices in the olivine structure.  相似文献   

2.
The phase and spin transitions in single-crystal monoclinic ferrosilite, FeSiO3, were investigated using X-ray diffraction and Mössbauer spectroscopy up to lower-mantle pressures and room temperature in a helium pressure medium. Using single-crystal X-ray diffraction, we measured the equation of state of ferrosilite up to about 43 GPa. We observed a P21/c-to-C2/c phase transition between 1.5 and 1.7 GPa and a phase transition from C2/c to a distinct P21/c structure between 30 and 34 GPa. With time-domain Mössbauer spectroscopy, we determined the hyperfine parameters of ferrous iron up to 95 GPa. The phase transitions were correlated with discontinuities in Mössbauer spectral features. We observed the onset of high-spin-to-low-spin transitions in the M1 and M2 sites at ～37 GPa and ～74 GPa, respectively. Understanding the electronic structure of iron in a well-characterized single crystal of ferrosilite may help interpret the behavior of iron in complex dense silicate phases.  相似文献   

3.
The Raman and Cr3+ and V2+ luminescence spectra of beryl and emerald have been characterized up to 15.0 and 16.4 GPa, respectively. The Raman spectra show that an E 1g symmetry mode at 138 cm?1 shifts negatively by ?4.57 (±0.55) cm?1/GPa, and an extrapolation of the pressure dependence of this mode indicates that a soft-mode transition should occur near 12 GPa. Such a transition is in accord with prior theoretical results. Dramatic changes in Raman mode intensities and positions occur between 11.2 and 15.0 GPa. These changes are indicative of a phase transition that primarily involves tilting and mild distortion of the Si6O18 rings. New Raman modes are not observed in the high-pressure phase, which indicates that the local bonding environment is not altered dramatically across the transition (e.g., changes in coordination do not occur). Both sharp line and broadband luminescence are observed for both Cr3+ and V2+ in emerald under compression to 16.4 GPa. The R-lines of both Cr3+ and V2+ shift to lower energy (longer wavelength) under compression. Both R-lines of Cr3+ split at ~13.7 GPa, and the V2+ R1 slope changes at this pressure and shifts more rapidly up to ~16.4 GPa. The Cr3+ R-line splitting and FWHM show more complex behavior, but also shift in behavior at ~13.7 GPa. These changes in the pressure dependency of the Cr3+ and V2+ R-lines and the changes in R-line splitting and FWHM at ~13.7 GPa further demonstrate that a phase transition occurs at this pressure, in good agreement with our Raman results. The high-pressure phase of beryl appears to have two Al sites that become more regular under compression. Hysteresis is not observed in our Raman or luminescence spectra on decompression, suggesting that this transition is second order in nature: The occurrence of a second-order transition near this pressure is also in accord with prior theoretical results. We speculate that the high-pressure phase (beryl-II) might be a mildly modulated structure, and/or that extensive twinning occurs across this transition.  相似文献   

4.
 The crystal structure of a synthetic Rb analog of tetra-ferri-annite (Rb–TFA) 1M with the composition Rb0.99Fe2+ 3.03(Fe3+ 1.04 Si2.96)O10.0(OH)2.0 was determined by the single-crystal X-ray diffraction method. The structure is homooctahedral (space group C2/m) with M1 and M2 occupied by divalent iron. Its unit cell is larger than that of the common potassium trioctahedral mica, and similar lateral dimensions of the tetrahedral and octahedral sheets allow a small tetrahedral rotation angle α=2.23(6)°. Structure refinements at 0.0001, 1.76, 2.81, 4.75, and 7.2 GPa indicate that in some respects the Rb–TFA behaves like all other micas when pressure increases: the octahedra are more compressible than the tetrahedra and the interlayer is four times more compressible than the 2:1 layer. However, there is a peculiar behavior of the tetrahedral rotation angle α: at lower pressures (0.0001, 1.76, 2.81 GPa), it has positive values that increase with pressure [from 2.23(6)° to 6.3(4)°] as in other micas, but negative values −7.5(5)° and −8.5(9)° appear at higher pressures, 4.75 and 7.2 GPa, respectively. This structural evidence, together with electrostatic energy calculations, shows that Rb–TFA has a Franzini A-type 2:1 layer up to at least 2.81 GPa that at higher pressure yields to a Franzini B-type layer, as shown by the refinements at 4.75 and 7.2 GPa. The inversion of the α angle is interpreted as a consequence of an isosymmetric displacive phase transition from A-type to B-type structure between 2.81 and 4.75 GPa. The compressibility of the Rb–TFA was also investigated by single-crystal X-ray diffraction up to a maximum pressure of 10 GPa. The lattice parameters reveal a sharp discontinuity between 3.36 and 3.84 GPa, which was associated with the phase transition from Franzini-A to Franzini-B structure. Received: 21 October 2002 / Accepted: 25 February 2003  相似文献   

5.
We present an ultrasonic and neutron powder diffraction study of crystalline MgSO4·7H2O (synthetic epsomite) and MgSO4·7D2O under pressure up to ~3 GPa near room temperature and up to ~2 GPa at lower temperatures. Both methods provide complementary data on the phase transitions and elasticity of magnesium sulphate heptahydrate, where protonated and deuterated counterparts exhibit very similar behaviour and properties. Under compression in the declared pressure intervals, we observed three different sequences of phase transitions: between 280 and 295 K, phase transitions occurred at approximately 1.4, 1.6, and 2.5 GPa; between 240 and 280 K, only a single phase transition occurred; below 240 K, there were no phase transformations. Overall, we have identified four new phase fields at high pressure, in addition to that of the room-pressure orthorhombic structure. Of these, we present neutron powder diffraction data obtained in situ in the three phase fields observed near room temperature. We present evidence that these high-pressure phase fields correspond to regions where MgSO4·7H2O decomposes to a lower hydrate by exsolving water. Upon cooling to liquid nitrogen temperatures, the ratio of shear modulus G to bulk modulus B increases and we observe elastic softening of both moduli with pressure, which may be a precursor to pressure-induced amorphization. These observations may have important consequences for modelling the interiors of icy planetary bodies in which hydrated sulphates are important rock-forming minerals, such as the large icy moons of Jupiter, influencing their internal structure, dynamics, and potential for supporting life.  相似文献   

6.
An in situ high pressure powder diffraction study, using high-brilliance synchrotron radiation, on lead feldspar (PbAl2Si2O8) was performed. Two samples, with Q od=0.68 and 0.76, were loaded in a diamond anvil cell and were compressed up to 11 GPa. Up to P=7.1 GPa the only phase present is lead feldspar. In the range 7.1–9.4 GPa sudden changes in the position of the reflections suggest the transformation of lead feldspar to a new phase (probably feldspar-like). The absence of split that would be compatible with triclinic symmetry rules out the monoclinic-triclinic transition, that was reported for the structurally similar strontium feldspar. At P>9.4 GPa some new extra reflections not indexable in the feldspar cell are present as well. During decompression the lead feldspar was the only phase present at P<6 GPa. Peak enlargement was observed with pressure, probably preliminary to amorphization. However almost complete amorphization was observed only after fortuitous shock compression at ∼18 GPa; the crystallinity was recovered at room pressure after decompression. The bulk modulus for lead feldspar was K=71.0(9) and 67.6(1.2) GPa for the two samples, in the range reported for feldspars. The cell parameters show a compression pattern which is similar to that observed in anorthite, with Δa/a 0>Δc/c 0>Δb/b 0; comparison with the high temperature behaviour shows that for lead feldspar the strain tensor with pressure is more isotropic and the deformation along a is less prominent. A turnover in the behaviour of the β angle with pressure suggests a change in the compression behaviour at P∼2 GPa. Rietveld refinement of the Pb coordinates was performed in a series of spectra with pressure ranging from 0.6 to 6.5 GPa. The combined analysis of cell parameters and Pb coordinates with pressure showed that the compression of the structure is mainly achieved by an approach of Pb atoms along a *. Received: 21 July 1998 / Revised, accepted: 13 October 1998  相似文献   

7.
?57Fe Mössbauer studies at room temperature and temperature-dependent resistance studies have been performed on a natural specimen of cubanite (CuFe2S3) in a diamond-anvil cell at pressures up to ～10 GPa. An insulator-metal phase transition occurs in the range 3.4–5.8 GPa coinciding with a previously observed structural transition from an orthorhombic to a hexagonal NiAs (B8) structure. The room temperature data shows that the metallization process concurs with a gradual transition from a magnetically ordered phase at low pressure to a nonmagnetic or paramagnetic phase at high-pressure. The change in magnetic behaviour at the structural transition may be attributed to a reduction of the Fe-S-Fe superexchange angle formed by edge-sharing octahedra occurring in the high-pressure phase. The non-magnetic or paramagnetic metallic phase at high pressure is retained upon decompression to ambient pressure-temperature conditions, indicative of substantial hysteresis associated with the pressure driven orthorhombic→hexagonal structural transition. The pressure evolution of both the 57Fe Mössbauer hyperfine interaction parameters and resistance behaviour is consistent with the transition from mixed-valence character in the low pressure orthorhombic structure to that of extended-electron delocalization in the hexagonal phase at high-pressure.  相似文献   

8.
 Germanium dioxide was found to undergo a transition from the tetragonal rutile-type to the orthorhombic CaCl2-type phase above 25 GPa. The detailed structural evolution of both phases at high pressure in a diamond anvil cell has been investigated by Rietveld refinement using angle-dispersive, X-ray powder-diffraction data. The square of the spontaneous strain (a−b)/(a+b) in the orthorhombic phase was found to be a linear function of pressure and no discontinuities in the cell constants and volume were observed, indicating that the transition is second-order and proper ferroelastic. Compression of the GeO6 octahedra was found to be anisotropic, with the apical Ge-O distances decreasing to a greater extent than the equatorial distances and becoming shorter than the latter above 7 GPa. Above this pressure, the GeO6 octahedron exhibits the common type of tetragonal distortion predicted by a simple ionic model and observed for most rutile-type structures such as those of the heavier group-14 dioxides and the metal difluorides. Above the phase transition, the columns of edge-sharing octahedra tilt about their two fold axes parallel to c and the rotation angle reaches 10.2(5)° by 36(1) GPa so as to yield a hexagonal close-packed oxygen sublattice. The compressibility increases at the phase change as is expected for a second-order transition at which an additional compression mechanism becomes available.  相似文献   

9.
 In situ synchrotron X-ray experiments in the system SnO2 were made at pressures of 4–29 GPa and temperatures of 300–1400 K using sintered diamond anvils in a 6–8 type high-pressure apparatus. Orthorhombic phase (α-PbO2 structure) underwent a transition to a cubic phase (Pa3ˉ structure) at 18 GPa. This transition was observed at significantly lower pressures in DAC experiments. We obtained the isothermal bulk modulus of cubic phase K 0 = 252(28) GPa and its pressure derivative K ′=3.5(2.2). The thermal expansion coefficient of cubic phase at 25 GPa up to 1300 K was determined from interpolation of the P-V-T data obtained, and is 1.7(±0.7) × 10−5 K−1 at 25 GPa. Received: 7 December 1999 / Accepted: 27 April 2000  相似文献   

10.
Calcium sulfate (CaSO4), one of the major sulfate minerals in the Earth’s crust, is expected to play a major role in sulfur recycling into the deep mantle. Here, we investigated the crystal structure and phase relation of CaSO4 up to ~90 GPa and 2300 K through a series of high-pressure experiments combined with in situ X-ray diffraction. CaSO4 forms three thermodynamically stable polymorphs: anhydrite (stable below 3 GPa), monazite-type phase (stable between 3 and ~13 GPa) and barite-type phase (stable up to at least 93 GPa). Anhydrite to monazite-type phase transition is induced by pressure even at room temperature, while monazite- to barite-type transition requires heating at least to 1500 K at ~20 GPa. The barite-type phase cannot always be quenched from high temperature and is distorted to metastable AgMnO4-type structure or another modified barite structure depending on pressure. We obtained the pressure–volume data and density of anhydrite, monazite- and barite-type phases and found that their densities are lower than those calculated from the PREM model in the studied P–T conditions. This suggests that CaSO4 is gravitationally unstable in the mantle and fluid/melt phase into which sulfur dissolves and/or sulfate–sulfide speciation may play a major role in the sulfur recycling into the deep Earth.  相似文献   

11.
We have measured the infrared spectrum of aragonite-structured PbCO3-cerussite to 41 GPa at 300 K in the diamond anvil cell. We observed a phase transition from an orthorhombic to a trigonal structure beginning at ~15 GPa, manifested by a splitting of the ν2-out-of-plane bending vibration and a broadening and dramatic decrease in amplitude of the ν1-symmetric stretching vibration of the carbonate group. While the locations of the ν1-symmetric stretching and ν4-in-plane bending bands are similar between the low- and high-pressure phases, their mode shifts and peak shapes change markedly near the transition. In particular, the ν1 symmetric stretch has an essentially zero pressure shift in the high pressure phase, and its dramatically enhanced peak width indicates that it may be symmetry forbidden. The decreased mode shifts of the carbonate vibrations after the phase transition suggest that the carbonate group is less compressible in the new structure. The spectral changes observed are consistent with a small, trigonal unit cell, with space group ${P\bar{3}{1c}}$ and two formula units, instead of a previously proposed orthorhombic cell with sixteen formula units. This structure is identical to that of the high-pressure phase of BaCO3, and likely CaCO3 as well. Our results thus indicate that the post-aragonite, high-pressure phase of divalent-cation carbonates may be a comparatively high-symmetry trigonal structure.  相似文献   

12.
 In-situ X-ray diffraction measurements of CaGeO3-wollastonite at high pressure at room temperature have been performed using a diamond anvil cell with an X-ray source. A new structural modification of CaGeO3-wollastonite is observed at about 6GPa and the characteristic reflections of the high pressure form are preserved on decompression to an ambient pressure. A rhodonite-like structure is proposed as a high pressure form from the crystal chemical consideration. The rhodonite-like phase is further transformed into a perovskite-form at about 15 GPa. The rhodonite-like-form of CaGeO3 seems not to be a stable phase from the heating experiments under high pressures. The metastable transition path from the wollastonite to the perovskite polymorph through the rhodonite-like structure is kinetically favored under room temperature pressurization. No pressure-induced amorphization is observed during the transition into the perovskite-form, although the transition is accompanied by the coordination change of Ge atoms from fourfold to sixfold. Received: July 19, 1995 / Revised, accepted: August 1996  相似文献   

13.
In situ time-resolved measurements of shock wave profiles for anisotropic fluorite crystals with two different crystal orientations were carried out up to a pressure of 34 GPa that is above the transition pressure for the fluorite to cotunnite phase. They indicate that the Hugoniot elastic limit varies with the crystal orientation and final pressure and that high-pressure phase transition from fluorite to a cotunnite-type structure occurs at 13 GPa in 10–20 ns for CaF2 [100]-oriented crystals and at 17 GPa in more than 50 ns for CaF2 [111]-oriented crystals, respectively. These results are in disagreement with those from static compression. The phase transition at static pressures has been known to be very sluggish, but the present results indicate a large sensitivity of kinetics to the relationship between crystallographic orientation and shock direction, supporting a martensitic mechanism for the fluorite to cotunnite phase transition that is enhanced by the effect of shock-induced shear. It is also helpful to explain the observation that the in situ emission spectra for shocked Eu-doped fluorite became weak and had no shift above ~15 GPa.  相似文献   

14.
The high-pressure behavior of the lattice elasticity of spodumene, LiAlSi2O6, was studied by static compression in a diamond-anvil cell up to 9.3 GPa. Investigations by means of single-crystal XRD and Raman spectroscopy within the hydrostatic limits of the pressure medium focus on the pressure ranges around ~3.2 and ~7.7 GPa, which have been reported previously to comprise two independent structural phase transitions. While our measurements confirm the well-established first-order C2/c–P21/c transformation at 3.19 GPa (with 1.2% volume discontinuity and a hysteresis between 0.02 and 0.06 GPa), both unit-cell dimensions and the spectral changes observed in high-pressure Raman spectra give no evidence for structural changes related to a second phase transition. Monoclinic lattice parameters and unit-cell volumes at in total 59 different pressure points have been used to re-calculate the lattice-related properties of spontaneous strain, volume strain, and the bulk moduli as a function of pressure across the transition. A modified Landau free energy expansion in terms of a one component order parameter has been developed and tested against these experimentally determined data. The Landau solution provides a much better reproduction of the observed anomalies than any equation-of-state fit to data sets truncated below and above P tr, thus giving Landau parameters of K 0 = 138.3(2) GPa, K′ = 7.46(5), λ V  = 33.6(2) GPa, a = 0.486(3), b = −29.4(6) GPa and c = 551(11) GPa.  相似文献   

15.
The stability and high-pressure behavior of perovskite structure in MnGeO3 and CdGeO3 were examined on the basis of in situ synchrotron X-ray diffraction measurements at high pressure and temperature in a laser-heated diamond-anvil cell. Results demonstrate that the structural distortion of orthorhombic MnGeO3 perovskite is enhanced with increasing pressure and it undergoes phase transition to a CaIrO3-type post-perovskite structure above 60 GPa at 1,800 K. A molar volume of the post-perovskite phase is smaller by 1.6% than that of perovskite at equivalent pressure. In contrast, the structure of CdGeO3 perovskite becomes less distorted from the ideal cubic perovskite structure with increasing pressure, and it is stable even at 110 GPa and 2,000 K. These results suggest that the phase transition to post-perovskite is induced by a large distortion of perovskite structure with increasing pressure.  相似文献   

16.
We used an in situ measurement method to investigate the phase transition of CaGeO3 polymorphs under high pressures and temperatures. A multi-anvil high-pressure apparatus combined with intense synchrotron X-ray radiation was used. The transition boundary between a garnet and a perovskite phase at T = 900–1,650 K and P = 3–8 GPa was determined as occurring at P (GPa) = 9.0−0.0023 × T (K). The transition pressure determined in our study is in general agreement with that observed in previous high-pressure experiments. The slope, dP/dT, of the transition determined in our study is consistent with that calculated from calorimetry data.  相似文献   

17.
The effects of pressure on the dehydration of gypsum materials were investigated up to 633 K and 25 GPa by using Raman spectroscopy and synchrotron X-ray diffraction with an externally heated diamond anvil cell. At 2.5 GPa, gypsum starts to dehydrate around 428 K, by forming bassanite, CaSO4 hemihydrate, which completely dehydrates to γ-anhydrite at 488 K. All the sulphate modes decrease linearly between 293 and 427 K with temperature coefficients ranging from −0.119 to −0.021 cm−1 K−1, where an abrupt change in the ν3 mode and in the OH-stretching region indicates the beginning of dehydration. Increasing the temperature to 488 K, the OH-stretching modes completely disappear, marking the complete dehydration and formation of γ-anhydrite. Moreover, the sample changes from transparent to opaque to transparent again during the dehydration sequence gypsum-bassanite-γ-anhydrite, which irreversibly transforms to β-anhydrite form at 593 K. These data compared with the dehydration temperature at room pressure indicate that the dehydration temperature increases with pressure with a ΔP/ΔT slope equal to 230 bar/K. Synchrotron X-ray diffraction experiments show similar values of temperature and pressure for the first appearance of bassanite. Evidence of phase transition from β-anhydrite structure to the monazite type was observed at about 2 GPa under cold compression. On the other hand at the same pressure (2 GPa and 633 K), β-anhydrite was found, indicating a positive Clausis-Clayperon slope of the transition. This transformation is completely reversible as showed by the Raman spectra on the sample recovered after phase transition.  相似文献   

18.
The crystal structure of chromite FeCr2O4 was investigated to 13.7 GPa and ambient temperature with single-crystal X-ray diffraction techniques. The unit-cell parameter decreases continuously from 8.3832 (5) to 8.2398 (11) Å up to 11.8 GPa. A fit to the Birch–Murnaghan equation of state (EoS) based on the P–V data gives: K 0 = 209 (13) GPa, K′ = 4.0 (fixed), and V 0 = 588 (1) Å3. The FeO4 tetrahedra and CrO6 octahedra are compressed isotropically with pressure with their Fe–O and Cr–O bond distances decreasing from 1.996 (6) to 1.949 (7) Å and from 1.997 (3) to 1.969 (7) Å, respectively. The tetrahedral site occupied by the Fe2+ cation is more compressible than the octahedral site occupied by the Cr3+ cation. The resulting EoS parameters for the tetrahedral and the octahedral sites are K 0 = 147 (9) GPa, K′ = 4.0 (fixed), V 0 = 4.07 (1) Å3 and K 0 = 275 (24) GPa, K′ = 4.0 (fixed), V 0 = 10.42 (2) Å3, respectively. A discontinuous volume change is observed between 11.8 and 12.6 GPa. This change indicates a phase transition from a cubic (space group Fd-[`3]{\overline{3}} m) to a tetragonal structure (space group I41 /amd). At the phase transition boundary, the two Cr–O bonds parallel to the c-axis shorten from 1.969 (7) to 1.922 (17) Å and the other four Cr–O bonds parallel to the ab plane elongate from 1.969 (7) to 1.987 (9) Å. This anisotropic deformation of the octahedra leads to tetragonal compression of the unit cell along the c-axis. The angular distortion in the octahedron decreases continuously up to 13.7 GPa, whereas the distortion in the tetrahedron rises dramatically after the phase transition. At the pressure of the phase transition, the tetrahedral bond angles along the c-axis direction of the unit cell begin decreasing from 109.5° to 106.6 (7)°, which generates a “stretched” tetrahedral geometry. It is proposed that the Jahn–Teller effect at the tetrahedrally coordinated Fe2+ cation becomes active with compression and gives rise to the tetrahedral angular distortion, which in turn induces the cubic-to-tetragonal transition. A qualitative molecular orbital model is proposed to explain the origin and nature of the Jahn–Teller effect observed in this structure and its role in the pressure-induced phase transition.  相似文献   

19.
Shock recovery experiments for single crystal and powdered specimens of TiO2 with the rutile structure were performed in the pressure range up to 72 GPa. Single crystal specimens were shocked parallel to [100], [110] and [001] directions. X-ray powder diffraction analysis showed that the amount of -PbO2 type TiO2 produced by shock-loading depended strongly on the shock propagation direction. The maximum yield (about 70%) was observed for shock loading to 36 GPa parallel to the [100] direction. In the [001] shock direction, the yield is much smaller than that of the [100] direction. This anisotropic yield was consistent with the observed anisotropy of the phase transition pressure in shock compression measurements. However, transformation to the -PbO2 type cannot explain the large volume change observed above about 20 GPa. On the basis of the high pressure behavior of MnF2, we assumed that the high pressure phase was either fluorite or distorted fluorite type and that the phase conversion to the -PbO2 type was induced spontaneously in the pressure reduction process.We present a displacive mechanism of phase transition under shock compression from the rutile structure to the fluorite structure, in which the rutile [100] is shown to correspond to the fluorite [001] or [110] and the rutile [001] to the fluorite [110]. Direct evidence is obtained by examining the [100] shocked specimen by high resolution electron microscopy.  相似文献   

20.
The equation of state and crystal structure of pyrope were determined by single crystal X-ray diffraction under hydrostatic conditions to 33 GPa, a pressure that corresponds to a depth of about 900 km in the lower mantle. The bulk modulus K T0 and its pressure derivative K ' T0 were determined simultaneously from an unweighted fit of the volume data at different pressures to a third order Birch-Murnaghan equation of state. They are 171(2) GPa and 4.4(2), respectively. Over the whole pressure range, MgO8 polyhedra showed the largest compression of 18.10(8)%, followed by AlO6 and SiO4 polyhedra, with compression of 11.7(1)% and 4.6(1)%, respectively. The polyhedral bulk moduli for MgO8, AlO6 and SiO4 are 107(1), 211(11) and 580(24) GPa, respectively, with K ' T0 fixed to 4. Significant compression of up to 1.8(1)% in the very rigid Si−O bonding in pyrope could be detected to 33 GPa. Changes in the degree of polyhedral distortion for all three types of polyhedra could also be observed. These changes could be found for the first time for AlO6 and SiO4 in pyrope. It seems that the compression of pyrope crystal structure is governed by the kinking of the Al−O−Si angle between the octahedra and tetrahedra. No phase transition could be detected to 33 GPa. Received: 24 March 1997 / Revised, accepted: 29 July 1997  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号