共查询到18条相似文献，搜索用时 218 毫秒
1.
2.
为了对比不同类型烃源岩样品在不同的热解模拟实验条件下生油和生气的活化能,选取渤中地区多个湖相泥质烃源岩原岩和干酪根样品进行了开放体系无水热解和封闭体系加水热解实验,烃源岩样品取自不同的洼陷和烃源层位,具有不同的有机质丰度、类型和成熟度。对比结果表明,有机质类型和成熟度对烃源岩生油活化能有重要影响,平均生油活化能随有机质类型变差和成熟度增大而增大。不同的洼陷、烃源层位和样品类型对平均生油活化能无明显影响,而样品类型则影响活化能的分布,原岩活化能分布相比干酪根更加集中。处于成熟阶段烃源岩的生气活化能比处于低熟阶段烃源岩的生油活化能高11~17kJ/mol。相对于开放体系无水热解实验,封闭体系加水热解实验活化能分布集中且能够包含初次裂解和二次裂解过程。本研究应用封闭体系加水热解模拟实验,分别选择低熟烃源岩原岩样品和成熟烃源岩干酪根样品进行生油和生气活化能研究,取得了良好的效果。 相似文献
3.
苏单格庙气田煤系烃源岩生烃特征评价 总被引：3，自引：0，他引：3
通过热解法对苏里格庙气田煤系源岩的有机质丰度、生烃潜力及其有机质类型进行了研究。结果表明：苏里格庙气田太原组、本溪组以及山西组的煤和碳质泥岩为非烃源岩，大部分山西组煤系泥岩属于差-中等烃源岩，少部分为非烃源岩，太原组则为非烃源岩。源岩中有机碳含量和生烃潜量不受其成熟度的影响，且有机碳含量和生油潜量呈明显的正相关关系。苏里格庙气田太原组和本溪组源岩为Ⅲ型干酪根；山西组源岩中1个样品为Ⅱ：型干酪根，其余都为Ⅲ型干酪根。 相似文献
4.
《吉林大学学报(地球科学版)》2015,(Z1)
烃源岩的生烃反应是在其限定的孔隙空间中承受高静岩压力和流体压力下进行的。然而受实验装置和条件的限制,传统的高压釜密闭空间生排烃模拟实验都是在一个低流体压力、无静岩压力、较大的生烃空间下进行的,与实际地质情况差异较大。利用无锡石油地质研究所研制的地层孔隙热压生排烃模拟仪,选用泌阳凹陷泌核三段未成熟灰色泥岩分别进行有限空间和常规高压釜方式加水模拟实验,从实验残渣中提取干酪根进行傅里叶变换红外光谱对比研究,选取脂肪度参数、芳香度参数、含氧度参数等作为特征参数,研究表明:1)伴随着脂族结构裂解、含氧基团脱落及芳香结构缩合,干酪根演化明显呈现出缓慢生油→快速生油→结束生油三个阶段;2)脂肪度参数和脂链长度及支链化程度参数表明,常规加水模拟条件下有机质的热裂解反应更为剧烈,在成熟度为0.92%时达到生油高峰,之后大幅衰减,而有限空间热压模拟在成熟度为2.0%时仍伴随有较强的生烃能力;3)烃源岩有限空间热压模拟条件下饱和烃的芳构化程度更低,这可能与其限定空间内较高的流体压力有关;4)含氧度在成熟中期间歇的轻微增大,暗示水对干酪根生烃过程中也许有重要的作用。两种模拟方式下干酪根不同的演化特征说明其在生烃反应机理上存在较大的差异,相对于常规高压釜模拟系统,较高的孔隙流体压力、压实作用、生烃空间与高温高压液态水的共同作用明显延缓了有限空间热压模拟干酪根热演化,更接近地质实际。 相似文献
5.
海相烃源岩二次生烃潜力定量评价新方法 总被引：1，自引：0，他引：1
烃源岩二次生烃的演化过程是残余干酪根热解演化与残留油热裂解转化两个既相互联系又完全不同的物理化学反应过程的叠加。本文利用自制高压釜热压生烃模拟实验装置,采取分阶段连续递进模拟实验方式,以海相烃源岩样品为例分别评价了残余干酪根的生烃潜力与残留可溶有机质转化油气潜力,建立了一套不同起始与终止成熟度海相烃源岩二次生烃潜力的定量评价方法,并首次明确提出了干酪根生油指数KIo、干酪根生气指数KIg、干酪根生烃指数KIh等评价烃源岩生烃潜力的参数,弥补了ROCK EVAL热解评价方法无法分别评价烃源岩在不同生烃演化阶段所生成的“油”或“烃气”潜力的不足。 相似文献
6.
《现代地质》2016,(3)
为准确评价湖相烃源岩的排油量及致密油资源潜力,结合湖相I型有机质的黄金管热模拟实验和青山口组烃源岩的有机地球化学分析,对松辽盆地湖相烃源岩生烃特征、动力学参数和排油效率进行了研究。热模拟实验的产物定量结果表明,松辽盆地青山口组湖相烃源岩具有可观的生油潜力,最大生油量约为600 mg/g·TOC,主要的生油阶段在Easy Ro=0.5%~1.2%。动力学计算结果表明,该烃源岩生油的平均活化能为218.5 k J/mol,重质组分生成活化能要低于轻质组分。结合青山口组烃源岩的生油动力学参数和英X58井热史的地质推演,证实该井湖相烃源岩的当前生油转化率为40%~60%,生油量为240~360 mg/g·TOC;通过残留烃的定量,计算得到该烃源岩的排油量为150~200mg/g·TOC,相对排油效率约为60%。生油量及排油效率结果表明,松辽盆地致密油资源潜力大。 相似文献
7.
不同类型烃源岩气态烃的生成特征研究——来自差热—色谱联机热模拟实验方法的证据 总被引：2，自引：0，他引：2
运用差热—色谱联机分析仪对不同煤阶的标准煤样及泥岩和碳酸盐岩烃源岩的热模拟研究表明,低成熟的煤具有更强的放热反应和较大的失重量,其放热反应第一峰温度和失重温度相对较低。低煤阶煤在热模拟过程中比高煤阶煤具有更强的生烃能力。烃源岩气态烃的生成量和特征不仅受控于烃源岩中有机质的丰度而且与其岩石类型、干酪根类型、成熟度等存在着密切关系。成熟度较高的烃源岩属耗尽了的烃源岩,其生烃能力相对较弱。含Ⅰ、Ⅱ型干酪根烃源岩生成的气态烃中重组分含量普遍较高,含Ⅲ型干酪根烃源岩生成的气态烃中甲、乙烷等轻组分含量普遍较高。碳酸盐岩烃源岩在热模拟的高温阶段往往能生成比较大量的气态烃。 相似文献
8.
湘中坳陷上古生界碳酸盐岩烃源岩特征及生烃模式 总被引：1，自引：0，他引：1
据野外露头观察和采样分析,湘中坳陷上古生界碳酸盐岩烃源岩以泥质灰岩、泥灰岩和石灰岩为主,生油母质以偏泥型为主,烃源岩的沉积厚度大、分布范围广,并具有有机碳丰度高、样品达标率高、热演化程度高的"三高"特点。在对碳酸盐岩烃源岩热演化研究的基础上总结出生烃模式,认为本区的生烃分为原始沥青解聚成烃、干酪根降解成烃、包裹有机质释放成烃和热裂解气共四个成烃阶段。 相似文献
9.
不同类型烃源岩气态烃的生成特征研究--来自差热-色谱联机热模拟实验方法的证据 总被引：2，自引：0，他引：2
运用差热-色谱联机分析仪对不同煤阶的标准煤样及泥岩和碳酸盐岩烃源岩的热模拟研究表明,低成熟的煤具有更强的放热反应和较大的失重量,其放热反应第一峰温度和失重温度相对较低。低煤阶煤在热模拟过程中比高煤阶煤具有更强的生烃能力。烃源岩气态烃的生成量和特征不仅受控于烃源岩中有机质的丰度而且与其岩石类型、干酪根类型、成熟度等存在着密切关系。成熟度较高的烃源岩属耗尽了的烃源岩,其生烃能力相对较弱。含Ⅰ、Ⅱ型干酪根烃源岩生成的气态烃中重组分含量普遍较高,含Ⅲ型干酪根烃源岩生成的气态烃中甲、乙烷等轻组分含量普遍较高。碳酸盐岩烃源岩在热模拟的高温阶段往往能生成比较大量的气态烃。 相似文献
10.
许多研究者认为,烃源岩干酪根C同位素组成主要受干酪根类型的影响,可以作为评价烃源岩类型、沉积环境和进行油气源对比的重要指标,并得到广泛应用.对额济纳旗及邻区典型剖面石炭系-二叠系烃源岩有机碳(TOC)的丰度、地球化学特征、热演化特征和干酪根C同位素分布的研究表明.研究区石炭系-二叠系烃源岩为浅海陆棚相沉积环境形成的泥质岩,TOC含量中等,以Ⅱ类干酪根为主,烃源岩演化进入成熟-过成熟阶段,干酪根C同位素县有显著偏重的特点.并且干酪根C同位素组成明显与热演化程度和有机碳丰度有关,随着烃源岩演化程度的不断提高,重碳同位素不断富集,在成熟-过成熟阶段,对C同位素的影响可达4‰～6‰随着TOC含量的增加,干酪根C同位素显著偏轻,影响值可达4‰以上.由于研究区烃源岩已进入成熟-过成熟阶段,干酪根C同位素的分布在演化过程中已经发生较大变化,干酪根类型的影响相对降低或已不显著,不能再作为评价烃源岩干酪根类型的指标. 相似文献
11.
海相碳酸盐岩烃源岩热解动力学研究:全岩和干酪根的对比 总被引：12，自引：3，他引：9
我国海相碳酸盐岩地层分布广泛,厚度巨大,经历的地质历史较长,特点是有机质丰度低,多处于高过成熟阶段.碳酸盐岩烃源岩评价对我国的油气资源评价与勘探至关重要.用生烃动力学方法来研究碳酸盐岩生油气过程是一个值得探索的研究方向.本文通过生烃动力学热模拟实验,求取了碳酸盐岩全岩和其干酪根不同烃类组分(甲烷、 C2～ C5气态烃)的生成动力学参数并进行对比.结果表明,在生烃动力学热解实验中,全岩和其干酪根具有相似的动力学参数,采用烃源岩应该比干酪根更符合实际,但是干酪根样品可以测得更为详细的实验数据,因此可以根据样品的情况,选择合理且易行的实验条件.在此基础上,以本文得到的参数作为参照指标,用动力学方法外推到地质实际中,可准确地提出适合我国的碳酸盐岩生烃定量模型,能为碳酸盐岩的资源评估等方面给出定量数值,从而为有效烃源岩的定量评价提供一种新的方法和途径. 相似文献
12.
泥页岩热模拟实验及成岩演化模式 总被引：2，自引：1，他引：1
随着泥页岩油气勘探开发的不断推进,对泥页岩的成岩作用研究越来越受到重视。通过对三种不同干酪根类型的泥页岩样品的热模拟实验发现,随着有机质成熟度的增加,干酪根热解生烃产生的有机质孔及不稳定矿物溶蚀孔增加,是泥页岩储集空间增加的主要原因;泥页岩成岩作用类型主要有黏土矿物转化、不稳定矿物溶蚀作用和重结晶作用;结合镜质体反射率,建立了基于热模拟实验的泥页岩综合成岩演化模式。研究表明:不同类型的干酪根在生烃过程中演化特征不同,Ⅰ型干酪根以"解聚型"的途径生烃,以产生有机质边缘孔为主;Ⅲ型干酪根以"平行脱官能团型"的途径生烃,以产生有机质内部孔为主;Ⅱ型干酪根介于两者之间,既可以产生有机质内部孔,也可以产生有机质边缘孔。 相似文献
13.
A detailed investigation of kerogen oxidation products remaining in aqueous solutions after the usual isolation of degradation products by extraction with ether or precipitation, was carried out for the first time in kerogen structural studies. Three shale samples were investigated: Green River shale (type I kerogen), Toarcian shale, Paris Basin (type II), and Mannville shale, Canada (type III). The yields of acids from aqueous solutions were noticeable: 12.98, 15.32 and 22.32%, respectively, based on initial kerogens. Qualitative and quantitative capillary GC/MS analysis showed that the ratios of different kinds of identified acids depended much on the type of precursor kerogen. Some of the acids identified in aqueous solutions have not been found earlier among the degradation products of the same kerogen samples, or were obtained in different ranges and yields. Consequently, slight modifications were suggested of the image on the nature of various types of kerogens based on examination of ether-soluble acids only. Namely, slightly higher proportions of aromatic and alkane-polycarboxylic acids in the total oxidation products of both type I and type II kerogens indicated larger participation of aromatic and alicyclic and/or heterocyclic structures in these two kerogens. On the other hand, for type III Mannville shale kerogen, a somewhat larger share of aliphatic type structures was demonstrated. 相似文献
14.
In this paper a thermogravimetry-differential thermal analysis method coupled with chromatography （TG-DTA-GC） has been adopted to simulate the generation of gaseous hydrocarbons from different hydrocarbon source rocks such as coals, mudstones, and carbonate rocks with different maturities. The temperature programming for thermal simulation experiment is 20℃/min from ambient temperature to 700℃. As viewed from the quantities and composition of generated gaseous hydrocarbons at different temperatures, it is shown that low-mature coal has experienced the strongest exothermic reaction and the highest loss of weight in which the first exothermic peak is relatively low. Low-mature coal samples have stronger capability of generating gaseous hydrocarbons than high-mature samples. The amounts and composition of gaseous hydrocarbons generated are closely related not only to the abundance of organic carbon in source rocks, but also to the type of kerogen in the source rocks, and their thermal maturity. In the present highly mature and over-mature rock samples organic carbon, probably, has already been exhausted, so the production of gaseous hydrocarbons in large amounts is impossible. The contents of heavy components in gaseous hydrocarbons from the source rocks containing type- Ⅰ and - Ⅱ kerogens are generally high ; those of light components such as methane and ethane in gaseous hydrocarbons from the source rocks with Ⅲ-type kerogens are high as well. In the course of thermal simulation of carbonate rock samples, large amounts of gaseous hydrocarbons were produced in a high temperature range. 相似文献
15.
Pyrolysis kinetics are determined for a series of asphaltene samples associated with different types of kerogens. The activation energy distributions obtained for asphaltenes related to type I kerogens cover a wide range, with significant hydrocarbon generation with activation energies above 350 kJ/mol. The ranges of activation energy distributions are relatively narrow for asphaltenes associated with type II and III kerogens, with little hydrocarbons generated with activation energies above 350 kJ/mol. If the type of associated kerogen can be reasonably constrained, the pyrolysis kinetics of the asphaltenes is potentially a very useful tool for assessing the maturity levels of reservoired oils. The results of pyrolysis kinetics indicate that there is still significant potential for asphaltenes to regenerate hydrocarbons. 相似文献
16.
Noriyuki Suzuki 《Geochimica et cosmochimica acta》1984,48(2):243-249
A preliminary attempt to fractionate amorphous kerogens from terrigenous bulk kerogen by a benzene-water two phase partition method under acidic condition was made. Microscopic observation revealed that amorphous kerogens and structured kerogens were fractionated effectively by this method. Characteristics of the amorphous and structured kerogens fractionated by this method were examined by some chemical analyses and compared with those of the bulk kerogen and humic acid isolated from the same rock sample (Haizume Formation, Pleistocene, Japan). The elemental and infrared (IR) analyses showed that the amorphous kerogen fraction had the highest atomic ratio and the lowest atomic ratio and was the richest in aliphatic structures and carbonyl and carboxyl functional groups. Quantities of fatty acids from the saponification products of each geopolymer were in agreement with the results of elemental and IR analyses. Distribution of the fatty acids was suggestive that more animal lipids participate in the formation of amorphous kerogens because of the abundance of relatively lower molecular weight fatty acids (such as C16 and C18 acids) in saponification products of amorphous kerogens. On the other hand, although the amorphous kerogen fraction tends to be rich in aliphatic structures compared with bulk kerogen of the same rock samples, van Krevelen plots of elemental compositions of kerogens from the core samples (Nishiyama Oil Field, Tertiary, Japan) reveal that the amorphous kerogen fraction is not necessarily characterized by markedly high atomic ratio. This was attributed to the oxic environment of deposition and the abundance of biodegraded terrestrial amorphous organic matter in the amorphous kerogen fraction used in this work. 相似文献
17.
《Applied Geochemistry》1993,8(3):245-254
The Porphyrin Maturity Parameter (PMP), which is derived from the vanadyl porphyrin distribution, is an excellent parameter for: (1) identifying the zone of hydrocarbon generation from marine source rock extracts; and (2) determining from oils the thermal maturity of their source rocks at expulsion.The PMP is measured using a methodology which is inexpensive, reliable and faster than earlier methods, allowing it to be used as a routine exploration tool. The PMP may be a more reliable maturity indicator for marine organic matter than some conventional methods such as vitrinite reflectance. Unlike most conventional maturity parameters guided by processes other than kerogen conversion, the reactions causing PMP evolution directly monitor the generation of bitumen and the concurrent thermal degradation of kerogen.Measurements on hydrous pyrolyzates from the Monterey Formation (offshore California), source rock bitumens from the Devonian-Mississippian Bakken Shale (Williston Basin), and Miocene Monterey equivalent source strata (San Joaquin Basin, California) illustrate the method. In all cases reviewed so far, PMP begins increasing at the onset of hydrocarbon generation and increases systematically and predictably as kerogen decomposition proceeds.In oils generated from high-S marine kerogens, PMP reflects the maturity of the source rock at the time of oil expulsion, provided that the oil does not undergo subsequent reservoior maturation or mixing with in-situ bitumen. 相似文献
18.
准噶尔盆地陆东-五彩湾地区石炭系具有良好的勘探前景,该地区石炭系烃源岩有机质丰度较高,成熟度范围宽,主要处于成熟-高成熟演化阶段,主要由Ⅲ型有机质组成。在对烃源岩样品进行常规评价的基础上,用开放体系进行了热解实验和动力学模拟,对陆东-五彩湾地区的生烃特征进行了研究,尝试了高成熟烃源岩生烃过程研究及Ⅲ型干酪根液态烃排烃时间的估计,并对石炭系地层产烃率进行了计算。结果显示,陆东-五彩湾地区石炭系最早在二叠纪（距今264 Ma左右）开始生烃,后期由于地层抬升,在古近纪早期（距今61 Ma左右）结束生烃。下石炭统产烃率大,液态烃排出时间估计在距今232~196 Ma之间;上石炭统产烃率较小,液态烃排出时间估计在距今196~178 Ma 之间,但天然气生成相对较晚,有利于天然气的保存。天然气可能主要来源于上石炭统烃源岩。 相似文献