首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The lunar crust at the Apollo 16 landing site contains substantial amounts of a “primitive component” in which the ferromagnesian group of elements is concentrated. The composition of this component can be retrieved via an analysis of mixing relationships displayed by lunar breccias. It is found to be a komatiite which is compositionally similar to terrestrial komatiites both in major and minor elements. The komatiite component of the lunar crust is believed to have formed by extensive degrees of melting of the lunar interior at depths greater than were involved in the formation of the lunar magma ocean which was parental to the crust. After formation of the anorthositic crust, it was invaded by extensive flows and intrusions of komatiite magma from these deeper source regions. The komatiites became intimately mixed with the anorthosite by intensive meteoroid impacts about 4.5 b.y. ago, thereby accounting for the observed mixing relationships displayed by the crust. The compositional similarity between lunar and terrestrial komatiites strongly implies a corresponding similarity between the compositions of their source regions in the lunar interior and the Earth's upper mantle. The composition of the lunar interior can be modelled more specifically by combining the komatiite composition with its liquidus olivine composition (as determined experimentally) in proportions chosen so as to produce a cosmochemically acceptable range of Mg/Si ratios for the bulk Moon. Except for higher FeO and lower Na2O, the range of compositions thereby obtained for the bulk moon is very similar to the composition of the Earth's upper mantle.The effects of meteoritic contamination on the abundances of cobalt and nickel in lunar highland breccias were subtracted on the assumption that the contaminating projectiles were chondritic. The cobalt and nickel residuals thereby obtained were found to correlate strongly with the (Mg + Fe) content of the breccias, demonstrating that the Co and Ni are associated with the ferromagnesian component of the breccias and are genuinely indigenous to the Moon. The lunar highland Co and Ni residuals also display striking Ni/Co versus Ni correlations which follow a similar trend to those displayed by terrestrial basalts, picrites and komatiites. The lunar trends provide further decisive evidence of the indigenous nature of the Co and Ni residuals and suggest the operation of extensive fractionation controlled by olivine-liquid equilibria in producing the primitive component of the lunar breccias. Indigenous nickel abundances at the Apollo 14, 15 and 17 sites are much lower than at the Apollo 16 site, although rocks from all sites follow the same Ni/Co versus Ni trends. It is suggested that the primitive component at the Apollo 14, 15 and 17 sites was generally of basaltic composition, in contrast to the komatiitic nature of the Apollo 16 primitive component.  相似文献   

2.
A total of 139 breccia and crystalline rock fragments in the size range 2–4 mm from four Apollo 15 soil samples have been examined. Two of the sample stations are on the mare surface (4 and 9A) and two are on the Apennine Front (2 and 6). Approximately 90% of the fragments from the Apennine Front are brown-glass “soil” breccias, but those from the mare surface are 60%–70% basalt. Several textural varieties of mare basalt have been recognized, but within experimental error there is no difference in their40Ar-39Ar ages. The major non-mare (Pre-Imbrian) crystalline rock types in the Apennine Front regolith are KREEP basalt, anorthositic rocks, recrystallized norite (including anorthositic norite) and recrystallized polymict breccias; however, such crystalline rocks are rare in the samples examined. Apparently, the near surface Imbrium ejecta below the regolith has not been thermally recrystallized, and probably there are no outcrops of crystalline rocks upslope from the sample stations.  相似文献   

3.
The Apollo 11 soil breccias are samplers of the ancient lunar environment due to their history in the regolith and their efficient closure to addition of recent solar wind upon compaction. These breccias contain the lowest15N/14N isotopic ratio yet reported for any lunar sample (in fact, for any natural sample). This extends the range of variation of15N/14N of the solar wind to greater than 30%, from a δ15N of ?190‰ in the past to +120‰ at present. No mechanism is yet known that is capable of accounting for such a large change in the15N/14N ratio without producing a substantial concomitant change in the13C/12C ratio, although some sort of nuclear reaction in the sun appears to be required. Apollo 11 soil breccias and 15086 are all formed by meteoritic impacts which compact the lower regolith against the basement rock without much heating. Rock 15086 formed from the layer of regolith between 100 and 200 cm depth, as shown by the close agreement between the nitrogen content and isotopic ratios of 15086 and those of the Apollo 15 deep drill core. Cosmic ray exposure ages, based on spallation-produced15N, are 2.3 ± 0.4 b.y. for Apollo 11 breccias. This age is much greater than the estimate from cosmogenic21Ne, presumably due to diffusive loss of neon.  相似文献   

4.
Highly siderophile element compositions of lunar impact melt breccias provide a unique record of the asteroid population responsible for large cratering events in the inner Solar System. Melt breccias associated with the 3.89 Ga Serenitatis impact basin resolve at least two separate impact events. KREEP-rich melt breccias representing the Apollo 17 poikilitic suite are enriched in highly siderophile elements (3.6-15.8 ppb Ir) with CI-normalized patterns that are elevated in Re, Ru and Pd relative to Ir and Pt. The restricted range of lithophile element compositions combined with the coherent siderophile element signatures indicate formation of these breccias in a single impact event involving an EH chondrite asteroid, probably as melt sheet deposits from the Serenitatis Basin. One exceptional sample, a split from melt breccia 77035, has a distinctive lithophile element composition and a siderophile element signature more like that of ordinary chondrites, indicating a discrete impact event. The recognition of multiple impact events, and the clear signatures of specific types of meteoritic impactors in the Apollo 17 melt breccias, shows that the lunar crust was not comprehensively reworked by prior impacts from 3.9 to 4.5 Ga, an observation more consistent with a late cataclysm than a smoothly declining accretionary flux. Late accretion of enstatite chondrites during a 3.8-4.0 Ga cataclysm may have contributed to siderophile element heterogeneity on the Earth, but would not have made a significant contribution to the volatile budget of the Earth or oxidation of the terrestrial mantle. Siderophile element patterns of Apollo 17 poikilitic breccias become more fractionated with decreasing concentrations, trending away from known meteorite compositions to higher Re/Ir and Pd/Pt ratios. The compositions of these breccias may be explained by a two-stage impact melting process involving: (1) deep penetration of the Serenitatis impactor into meteorite-free lower crust, followed by (2) incorporation of upper crustal lithologies moderately contaminated by prior meteoritic infall into the melt sheet. Trends to higher Re/Ir with decreasing siderophile element concentrations may indicate an endogenous lunar crustal component, or a non-chondritic late accretionary veneer in the pre-Serenitatis upper crust.  相似文献   

5.
The Luna 16 regolith sample differs from Apollo 11, 12 and 14 regolith and basalt samples by having smaller negative Eu and Sr anomalies and nearly chondritic Eu/Sm and Eu/Sr ratios although the overall REE, Ba, Sr and U concentrations are 25 to 45 times chondrites. Major element data, in particular FeO vs. Al2O3, show that the Luna 16 regolith sample is composed of materials that follow a quantitatively different Fe/Al variation than do Apollo 11, 12, 14 and 15 samples. The small Eu and Sr anomalies and the displaced Fe/Al variation are two chemical features unique to the Luna 16 regolith sample. The Luna 16 regolith sample can contain little if any of the rock types abundant at Apollo sites, thus indicating that the unique chemical features are typical of local or nearby materials and indicate a separate petrogenetic province for major component rock types of the Luna 16 regolith.  相似文献   

6.
Experimental data have been used to establish the temperature coordinates for Warner's [1] scale of lunar metamorphic grades. A model of an ejecta blanket with a hot base layer overlain by a cold top layer can produce the observed features of the Apollo 14 breccias. The breccia formation process probably encompassed temperatures between 700°C and at least 1100°C and was a reasonably rapid process (hours to days).  相似文献   

7.
207Pb/206Pb of “low temperature sited” (LTS) lead as reported by Silver (1975) increases with40Ar/36Ar of trapped argon in thirteen samples from lunar maria. This strongly supports an earlier conclusion by (1972) that large (40Ar/36Ar)T ratios represent ancient regolith records, and provides a rough (40Ar/36Ar)T timescale.The erasure of (40Ar/36Ar)T records in surface soils by the excavation of deep-seated, “fresh” bedrock and by erosion of particle surfaces via ion sputtering must have been counteracted by conserving processes in the regolith. Two such processes are relatively well understood: agglutinate formation and the excavation and comminution of soil breccias which have preserved an ancient (40Ar/36Ar)T record. The frequency distribution of (40Ar/36Ar)T in 82 “soils” from all Apollo missions suggests a third process, which requires that sizeable “pockets” of ancient regolith materials including soils have survived deep turnover for billions of years.Large-scale mobility of LTS lead throughout all of the regolith does not appear to occur.Inert gas ions with sufficient energy for trapping may have reached the lunar surface more than 3 b.y. ago.The Apollo 11 microbreccias appear to have been formed more than 3 b.y. ago from regoliththen extant on the surface.  相似文献   

8.
Eight of eleven Apollo 16 rake-sample anorthosites are very similar to each other, to hand-specimen Apollo 16 anorthosites, and to Apollo 15 anorthosites. They have feldspar An96.6, both high- and low-Ca pyroxene with a restricted range of (low-magnesium) composition, minor olivine (～ Fo60), traces of ilmenite and chromite, and originally coarse-grained, but now cataclastic texture. Such ferroan anorthosite is evidently a coherent, distinctive and widespread lunar rock type of cumulate origin which may not necessarily be very closely related genetically to other highland rock types.  相似文献   

9.
Metallic iron has been precipitated from a synthetic high-iron, high-titanium Apollo 11 composition glass powder in a furnace with the oxygen fugacity controlled by gas mixing techniques. Measurable quantities of iron, as determined with a vibrating sample magnetometer capable of detecting 0.01 wt% iron in the absence of ferromagnetic minerals, were produced in experiments at temperatures between 700°C and 1045°C, with run times between 3 hr and 95 hr, and oxygen fugacities between 1 and 2 orders of magnitude below the iron-wustite (IW) buffer curve. Such conditions of ?O2 and T are probably not greatly different from those occurring in a large lunar ejecta blanket. The oxygen fugacity determines the amount of iron produced for a given time and temperature, with about 1% produced if log ?O2 is 1.4 units below the IW buffer curve and about 3.5% produced if log ?O2 is 1.7 units below at 990°C. Above 950°C essentially all the iron is multidomain (>300Å) while below 950°C as much as 15% is single domain (150Å–300Å) and an appreciable quantity remains even smaller. Compaction of the sample slows the rate of reduction but does not influence the grain size of metal. The quantities and size distribution of the reduced iron in a number of the experimental runs are strongly analogous to certain lunar soils and breccias and indicate that reduction in an ejected blanket could partly account for the excess iron of lunar soils and breccias relative to the igneous rocks.  相似文献   

10.
One of the essential controls on the microwave thermal emissions (MTE) of the lunar regolith is the abundance of FeO and TiO2, known as the (FeO+TiO2) abundance (FTA). In this paper, a radiative transfer simulation is employed first to study the change in the brightness temperature (TB) with FTA under a range of frequencies and surface temperatures. Then, we analyze the influence of FTA on the MTE of the lunar regolith using microwave sounder (CELMS) data from the Chang’E-2 lunar orbiter, Clementine UV-VIS data, and lunar samples recovered from the Apollo and Surveyor projects. We conclude that: (1) FTA strongly influences the MTE of the lunar regolith, but it is not the decisive control, and (2) FTA decreases slightly with depth. This research plays an essential role in appropriately inverting CELMS data to obtain lunar regolith parameters.  相似文献   

11.
The concentrations of the rare earth elements (REE), K, Rb, Sr, Ba, U, Zr and Cr for the Luna 20 soil and four different Apollo 16 soils are reported. These trace element abundances imply: (1) that the lunar highlands consist of a mixture of rocks rich in large ion lithophile (LIL) elements and LIL-element impoverished anorthosites; or (2) that the bulk of the aluminum-rich crust did not originate by upward segregation of plagioclase in a primitive liquid shell. The Luna 20 soil is distinguished from the Apollo 16 soil by lower aluminum and LIL element abundances.  相似文献   

12.
Apollo 15 breccia 15427 and soils 15101, 15261 and 15301 contain abundant spheres and fragments of a green glass that is remarkably constant in composition. The glass is rich in Fe and Mg, and low in Ti, unlike any known lunar basalt, and may be derived from material of pyroxenitic composition in the Apennine Front.  相似文献   

13.
The thermal conductivity of a simulated Apollo 12 lunar soil sample was measured with a needle probe under vacuum. The result showed that the sample, with bulk densities of 1.70–1.85 g cm?3 held in a vertical cylinder (2.54 cm in diameter and 6.99 cm long) has a thermal conductivity ranging from 8.8 to 10.9 mW m?1 K?1. This is comparable to the lunar regolith's thermal conductivity as determined in situ. Besides the dense packing of the soil particles, an enhanced intergranular thermal contact, due to the self-compression of the sample, is necessary to raise the sample's thermal conductivity from the level of loose soil (< 5 mW m?1 K?1) to that of the lunar regolith deeper than 35 cm (～ 10 mW m?1 K?1). A model of the lunar regolith, a thin layer of loose soil resting on a compacted self-compressed substratum, is consistent with the lunar regolith's surface structure as deduced from an observation of the lunar surface's brightness temperature. Martian regolith surface structure is similar, except that its surface layer may be missing in places because of aeolian activity. Measurements of thermal conductivity under simulated martian surface conditions showed that the thermal properties of loose and compacted soils agreed with the two peak values of the martian surface's thermal inertia as observed from “Viking” orbiters, suggesting that drifted loose soil and exposed compacted soil are responsible for the bimodal distribution of the martian surface's thermal inertia near zero elevation. For compacted soil exposed to the martian surface to have the same thermal conductivity as that buried under the surface layer, a cohesion of the soil particles must be assumed.  相似文献   

14.
Twenty six samples from seven hand specimens, collected from the station 6 boulder at the Apollo 17 landing site, were studied magnetically. The boulder is a breccia consisting of three lithologic units distinguished by their clast population. The direction of magnetization of samples from unit B which is almost devoid of large clasts cluster fairly well after alternating field demagnetization. Samples from unit C which is characterized by abundant large clasts up to 1 m in size do not contain a uniform direction of magnetization but the distribution is not random. Based on these data we propose that the natural remanent magnetization (NRM) in these breccias is the vector sum of two magnetizations, a pre-impact magnetization and a partial thermoremanence acquired during breccia formation. The relative contribution of the two components is controlled by the thermal history of the ejecta, which in turn is determined by its clast population. Depending on the clast population, the NRM can be a total thermoremanence, a partial thermoremanence plus a pre-impact magnetization, or a pre-impact magnetization. This model of thermal overprinting might be applicable to all lunar breccias of medium and higher metamorphic grade.  相似文献   

15.
We report on a40Ar-39Ar study of the Apollo 16 breccia 67435 and present ages of five samples representing matrix, lithic clasts and plagioclase clasts. While the matrix age spectrum does not have a well-defined plateau, the two lithic clasts gave plateau ages of 3.96 and 4.04 AE. Since all samples had apparent ages of ～1 AE in the fractions ≤600°C extraction temperature, the breccia might have been assembled in a rather mild process at about that time or even more recently out of material with different metamorphic ages. The two plagioclase samples, of which one was a single 9-mg mineral clast and the other a 15-mg composite of several clasts, also have ages of ～1 AE in the low-temperature release fractions, but are apparently undisturbed by any ～4-AE events since they both have well-defined plateaux at 4.42 AE. The age of these strongly calcic plagioclase clasts, believed to be remnants of the anorthositic lunar crust, establishes a lower age limit to the end of the early lunar differentiation and thus places a strong constraint to the lunar evolution.  相似文献   

16.
Bulk compositions of igneous and microbreccia lithic fragments, glasses, and chondrules from Luna 16 fines as well as compositions of minerals in basaltic lithic fragments were determined with the electron microprobe. Igneous lithic fragments and glasses are divided into two groups, the anorthositic-noritic-troctolitic (hereafter referred to as ANT) and basaltic groups. Chondrules are always of ANT composition and microbreccia lithic fragments are divided into groups 1 and 2. The conclusions reached may be summarized as follows: (1) Luna 16 fines are more similar in composition to Apollo 11 than to Apollo 12 and 14 materials (e.g. Apollo 11 igneous lithic fragments and glasses fall into similar ANT and basaltic groups; abundant norites in Luna 16 and Apollo 11 are not KREEP as in Apollo 12 and 14; Luna 16 basaltic lithic fragments may represent high-K and low-K suites as is the case for Apollo 11; rare colorless to greenish, FeO-rich and TiO2-poor glasses were found in both Apollo 11 and Luna 16; Luna 16 spinels are similar to Apollo 11 spinels but unlike those from Apollo 12). (2) No difference was noted in the composition of lithic fragments, glasses and chondrules from Luna 16 core tube layers A and D. (3) Microbreccia lithic fragments of group 1 originated locally by mixing of high proportions of basaltic with small proportions of ANT materials. (4) Glasses are the compositional analogs to the lithic fragments and not to the microbreccias; most glasses were produced directly from igneous rocks. (5) Glasses show partial loss of Na and K due to vaporization in the vitrification process. (6) Luna 16 chondrules have ANT but not basaltic composition. It is suggested that either liquid droplets of ANT composition are more apt to nucleate from the supercooled state; or basaltic droplets have largely been formed in small and ANT droplets in large impact events (in the latter case, probability for homogeneous and inhomogeneous nucleation is larger. (7) No evidence for ferric iron and water-bearing minerals was found. (8) Occurrence of a great variety of igneous rocks in Luna 16 samples (anorthosite, noritic anorthosite, anorthositic norite, olivine norite, troctolite, and basalt) confirm our earlier conclusion that large-scale melting or partial melting to considerable depth and extensive igneous differentiation must have occurred on the moon.  相似文献   

17.
SmNd isotopic data for mineral separates from the ferroan anorthosite 60025 define a precise isochron of 4.44 ± 0.02Ga age. This age is roughly 110 m.y. younger than the formation of the first large solid objects in the solar nebula, as recorded by the radiometric ages of the differentiated meteorites. In the magma ocean model for early lunar differentiation, ferroan anorthosites are the first crustal rocks to form on the Moon. If the Moon is as old as the oldest meteorites, the relatively young age determined for 60025 implies either that the magma ocean did not form synchronously with lunar formation, or that the magma ocean required over 100 m.y. before reaching the stage of ferroan anorthosite crystallization. Alternatively, we propose that the accumulated body of radiogenic isotope data for lunar rocks permit the Moon to be as young as 4.44–4.51 Ga. If so, isotopic evidence for chemical differentiation on the Earth at about this same time suggests that the formation of the Moon is reflected in the chemical evolution of the Earth. This, in turn, is consistent with the idea that the materials that now make up the Moon were derived from the Earth, perhaps ejected by collision between the Earth and another very large planetesimal during the final stages of accumulation of the terrestrial planets. Terrestrial origin models for the Moon lessen the requirement that the Earth and Moon each have near chondritic relative abundances of the refractory elements and could require that certain chemical and isotopic characteristics of both bodies be considered in the framework of the chemical mass-balance of the combined Earth-Moon system.  相似文献   

18.
Abundances and isotopic compositions of all the stable noble gases have been measured in 19 different depths of the Apollo 15 deep drill core, 7 different depths of the Apollo 16 deep drill core, and in several surface fines and breccias. All samples analyzed from both drill cores contain large concentrations of solar wind implanted gases, which demonstrates that even the deepest layers of both cores have experienced a lunar surface history. For the Apollo 15 core samples, trapped4He concentrations are constant to within a factor of two; elemental ratios show even greater similarities with mean values of4He/22Ne= 683±44,22Ne/36Ar= 0.439±0.057,36Ar/84Kr= 1.60±0.11·103, and84Kr/132Xe= 5.92±0.74. Apollo 16 core samples show distinctly lower4He contents,4He/22Ne(567±74), and22Ne/36Ar(0.229±0.024), but their heavy-element ratios are essentially identical to Apollo 15 core samples. Apollo 16 surface fines also show lower values of4He/22Ne and22Ne/36Ar. This phenomenon is attributed to greater fractionation during gas loss because of the higher plagioclase contents of Apollo 16 fines. Of these four elemental ratios as measured in both cores, only the22Ne/36Ar for the Apollo 15 core shows an apparent depth dependance. No unambiguous evidence was seen in these core materials of appreciable variations in the composition of the solar wind. Calculated concentrations of cosmic ray-produced21Ne,80Kr, and126Xe for the Apollo 15 core showed nearly flat (within a factor of two) depth profiles, but with smaller random concentration variations over depths of a few cm. These data are not consistent with a short-term core accretion model from non-irradiated regolith. The Apollo 15 core data are consistent with a combined accretion plus static time of a few hundred million years, and also indicate variable pre-accretion irradiation of core material. The lack of large variations in solar wind gas contents across core layers is also consistent with appreciable pre-accretion irradiation. Depth profiles of cosmogenic gases in the Apollo 16 core show considerably larger concentrations of cosmogenic gases below ～65 cm depth than above. This pattern may be interpreted either as an accretionary process, or by a more recent deposition of regolith to the upper ～70 cm of the core. Cosmogenic gas concentrations of several Apollo 16 fines and breccias are consistent with ages of North Ray Crater and South Ray Crater of ～50·106 and ～2·106 yr, respectively.  相似文献   

19.
Olivine clasts, which have mantles formed by reaction of the olivine with the breccia matrix, are present in the high-grade thermally metamorphosed Apollo 14 breccias. The mantled olivine clasts are most abundant in 14311, but they are also present in 14304 and 14319. Typically the mantles consist of two zones: an inner corona containing pyroxene, ilmenite and commonly plagioclase, and an outer light-colored halo where the matrix is depleted in ilmenite. The growth of the coronas involved matrix-to-corona diffusion of TiO2 and corona-to-matrix diffusion of MgO and FeO. These diffusive fluxes can be attributed to chemical potential gradients developed between mineral assemblages in local equilibrium at the olivine-corona boundary and the matrix.  相似文献   

20.
Approximately 500 glasses between 1 mm and 125 μm in size have been analyzed from fourteen samples from the Apollo 16 core sections 60002 and 60004. The majority of glasses have compositions comparable to those found in previous studies of lunar surface soils; however, two new and distinct glass compositions that are probably derived in part from mare material occur in the core samples. The major glass composition in all samples is that of Highland Basalt glass, but it also appears that high-K Fra Mauro Basalt (KREEP) glass is more common at the Apollo 16 site than was previously thought. The relative abundance of glasses within the core samples is random in distribution: each sample is characterized by a particular assemblage and distribution of the constituent glass compositions.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号