首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Digital flow networks derived from digital elevation models (DEMs) sensitively react to errors due to measurement, data processing and data representation. Since high‐resolution DEMs are increasingly used in geomorphological and hydrological research, automated and semi‐automated procedures to reduce the impact of such errors on flow networks are required. One such technique is stream‐carving, a hydrological conditioning technique to ensure drainage connectivity in DEMs towards the DEM edges. Here we test and modify a state‐of‐the‐art carving algorithm for flow network derivation in a low‐relief, agricultural landscape characterized by a large number of spurious, topographic depressions. Our results show that the investigated algorithm reconstructs a benchmark network insufficiently in terms of carving energy, distance and a topological network measure. The modification to the algorithm that performed best, combines the least‐cost auxiliary topography (LCAT) carving with a constrained breaching algorithm that explicitly takes automatically identified channel locations into account. We applied our methods to a low relief landscape, but the results can be transferred to flow network derivation of DEMs in moderate to mountainous relief in situations where the valley bottom is broad and flat and precise derivations of the flow networks are needed. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

2.
We derived a high‐resolution, spatially continuous map of erosion and deposition associated with the debris‐laden flows triggered by the 2011 Las Conchas wildfire and subsequent rainstorms over a 197 km2 area in New Mexico, USA. This map was produced using airborne‐LiDAR‐derived bare‐earth digital elevation models (DEMs) acquired approximately one year before and one year after the wildfire. Differencing of the pre‐wildfire and post‐wildfire‐and‐rainstorm bare‐earth DEMs yielded a DEM‐of‐difference (DoD) map that quantifies the magnitude of ground‐surface elevation changes due to erosion/deposition within each 1 m2 pixel. We applied a 0.3 m threshold filter to our DoD to remove changes that could have been due to artifacts and/or imperfect georeferencing. The 0.3 m value for the threshold filter was chosen based on the stated accuracy of the LiDAR as well as a comparison of areas of significant topographic change mapped in aerial photographs with those predicted using a range of candidate threshold values for the DoD filter. We developed an automated procedure that accepts the DoD map as input and computes, for every pixel in the DEM, the net sediment volume exported through each pixel by colluvial and/or fluvial processes using a digital routing algorithm. An analysis of the resulting sediment volume map for the Las Conchas fire demonstrates that sediment volume is proportional to upstream contributing area. After normalized by contributing area, the average sediment yield (defined as the sediment volume divided by the contributing area) increases as a power‐law functions of the average terrain slope and soil burn severity class (SBSC) with exponents equal to approximately 1.5. Our analysis quantifies the relationships among sediment yield, average terrain slope, and average soil burn severity class at the watershed scale and should prove useful for predicting the geomorphic response of wildfire‐affected drainage basins. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

3.
流域水系自动提取的方法和应用   总被引：31，自引：3，他引：28  
李昌峰  冯学智  赵锐 《湖泊科学》2003,15(3):205-212
讨论由栅格数字高程模型(DEM)自动提取流域水系的原理和方法,并以西苕溪中上游流域为研究区进行了河网生成实验. 研究表明:在山地丘陵区和平均地形坡度不小于3°的区域,所生成河网具有很高的可靠性. 为了解决在平均地形坡度小于3°的平坦区域河网生成中产生的虚拟河网与自然水系偏差较大的问题,提出了利用主干河道和平原水系数字化作为约束条件的生成河网的方法,取得了与实际情况比较接近的结果,从而使水文要素的模拟更具有实际意义.  相似文献   

4.
The southern Appalachians represent a landscape characterized by locally high topographic relief, steep slopes, and frequent mass movement in the absence of significant tectonic forcing for at least the last 200 Ma. The fundamental processes responsible for landscape evolution in a post‐orogenic landscape remain enigmatic. The non‐glaciated Cullasaja River basin of south‐western North Carolina, with uniform lithology, frequent debris flows, and the availability of high‐resolution airborne lidar DEMs, is an ideal natural setting to study landscape evolution in a post‐orogenic landscape through the lens of hillslope–channel coupling. This investigation is limited to channels with upslope contributing areas >2.7 km2, a conservative estimate of the transition from fluvial to debris‐flow dominated channel processes. Values of normalized hypsometry, hypsometric integral, and mean slope vs elevation are used for 14 tributary basins and the Cullasaja basin as a whole to characterize landscape evolution following upstream knickpoint migration. Results highlight the existence of a transient spatial relationship between knickpoints present along the fluvial network of the Cullasaja basin and adjacent hillslopes. Metrics of topography (relief, slope gradient) and hillslope activity (landslide frequency) exhibit significant downstream increases below the current position of major knickpoints. The transient effect of knickpoint‐driven channel incision on basin hillslopes is captured by measuring the relief, mean slope steepness, and mass movement frequency of tributary basins and comparing these results with the distance from major knickpoints along the Cullasaja River. A conceptual model of area–elevation and slope distributions is presented that may be representative of post‐orogenic landscape evolution in analogous geologic settings. Importantly, the model explains how knickpoint migration and channel–hillslope coupling is an important factor in tectonically‐inactive (i.e. post‐orogenic) orogens for the maintenance of significant relief, steep slopes, and weathering‐limited hillslopes. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

5.
Predicting runoff and erosion from watersheds burned by wildfires requires an understanding of the three-dimensional structure of both hillslope and channel drainage networks. We investigate the small- and large-scale structures of drainage networks using field studies and computer analysis of 30- m digital elevation model. Topologic variables were derived from a composite 30-m DEM, which included 14 order 6 watersheds within the Pikes Peak batholith. Both topologic and hydraulic variables were measured in the field in two smaller burned watersheds （3.7 and 7.0 hectares） located within one of the order 6 watersheds burned by the 1996 Buffalo Creek Fire in Central Colorado. Horton ratios of topologic variables （stream number, drainage area, stream length, and stream slope） for small-scale and large-scale watersheds are shown to scale geometrically with stream order （i.e., to be scale invariant）. However, the ratios derived for the large-scale drainage networks could not be used to predict the rill and gully drainage network structure. Hydraulic variables （width, depth, cross- sectional area, and bed roughness） for small-scale drainage networks were found to be scale invariant across 3 to 4 stream orders. The relation between hydraulic radius and cross-sectional area is similar for fills and gullies, suggesting that their geometry can be treated similarly in hydraulic modeling. Additionally, the rills and gullies have relatively small width-to-depth ratios, implying sidewall friction may be important to the erosion and evolutionary process relative to main stem channels.  相似文献   

6.
Channel morphology of forested, mountain streams in glaciated landscapes is regulated by a complex suite of processes, and remains difficult to predict. Here, we analyze models of channel geometry against a comprehensive field dataset collected in two previously glaciated basins in Haida Gwaii, B.C., to explore the influence of variable hillslope–channel coupling imposed by the glacial legacy on channel form. Our objective is to better understand the relation between hillslope–channel coupling and stream character within glaciated basins. We find that the glacial legacy on landscape structure is characterized by relatively large spatial variation in hillslope–channel coupling. Spatial differences in coupling influence the frequency and magnitude of coarse sediment and woody material delivery to the channel network. Analyses using a model for channel gradient and multiple models for width and depth show that hillslope–channel coupling and high wood loading induce deviations from standard downstream predictions for all three variables in the study basins. Examination of model residuals using Boosted Regression Trees and nine additional channel variables indicates that ~10 to ~40% of residual variance can be explained by logjam variables, ~15–40% by the degree of hillslope–channel coupling, and 10–20% by proximity to slope failures. These results indicate that channel classification systems incorporating hillslope–channel coupling, and, indirectly, the catchment glacial legacy, may present a more complete understanding of mountain channels. From these results, we propose a conceptual framework which describes the linkages between landscape history, hillslope–channel coupling, and channel form. © 2018 John Wiley & Sons, Ltd.  相似文献   

7.
The process of channelization on river floodplains plays an essential role in regulating river sinuosity and creating river avulsions. Most channelization occurs within the channel belt (e.g. chute channels), but growing evidence suggests some channels originate outside of the channel‐belt in the floodplain. To understand the occurrence and prevalence of these floodplain channels we mapped 3064 km2 of floodplain in Indiana, USA using 1.5 m resolution digital elevation models (DEMs) derived from airborne light detection and ranging (LiDAR) data. We find the following range of channelization types on floodplains in Indiana: 6.8% of floodplain area has no evidence of channelization, 55.9% of floodplains show evidence (e.g. oxbow lakes) of chute‐channel activity in the channel belt, and 37.3% of floodplains contain floodplain channels that form long, coherent down‐valley pathways with bifurcations and confluences, and they are active only during overbank discharge. Whereas the first two types of floodplains are relatively well studied, only a few studies have recognized the existence of floodplain channels. To understand why floodplain channels occur, we compared the presence of channelization types with measured floodplain width, floodplain slope, river width, river meander rate, sinuosity, flooding frequency, soil composition, and land cover. Results show floodplain channels occur when the fluvial systems are characterized by large floodplain‐to‐river widths, relatively higher meandering rates, and are dominantly used for agriculture. More detailed reach‐scale mapping reveals that up to 75% of channel reaches within floodplain channels are likely paleo‐meander cutoffs. The meander cutoffs are connected by secondary channels to form floodplain channels. We suggest that secondary channels within floodplains form by differential erosion across the floodplain, linking together pre‐existing topographic lows, such as meander cutoffs. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

8.
  相似文献   

9.
An extensive survey and topographic analysis of five watersheds draining the Luquillo Mountains in north‐eastern Puerto Rico was conducted to decouple the relative influences of lithologic and hydraulic forces in shaping the morphology of tropical montane stream channels. The Luquillo Mountains are a steep landscape composed of volcaniclastic and igneous rocks that exert a localized lithologic influence on the stream channels. However, the stream channels also experience strong hydraulic forcing due to high unit discharge in the humid rainforest environment. GIS‐based topographic analysis was used to examine channel profiles, and survey data were used to analyze downstream changes in channel geometry, grain sizes, stream power, and shear stresses. Results indicate that the longitudinal profiles are generally well graded but have concavities that reflect the influence of multiple rock types and colluvial‐alluvial transitions. Non‐fluvial processes, such as landslides, deliver coarse boulder‐sized sediment to the channels and may locally determine channel gradient and geometry. Median grain size is strongly related to drainage area and slope, and coarsens in the headwaters before fining in the downstream reaches; a pattern associated with a mid‐basin transition between colluvial and fluvial processes. Downstream hydraulic geometry relationships between discharge, width and velocity (although not depth) are well developed for all watersheds. Stream power displays a mid‐basin maximum in all basins, although the ratio of stream power to coarse grain size (indicative of hydraulic forcing) increases downstream. Excess dimensionless shear stress at bankfull flow wavers around the threshold for sediment mobility of the median grain size, and does not vary systematically with bankfull discharge; a common characteristic in self‐forming ‘threshold’ alluvial channels. The results suggest that although there is apparent bedrock and lithologic control on local reach‐scale channel morphology, strong fluvial forces acting over time have been sufficient to override boundary resistance and give rise to systematic basin‐scale patterns. Copyright © 2010 John Wiley and Sons, Ltd.  相似文献   

10.
Topographic indices may be used to attempt to approximate the likely distribution of variable source areas within a catchment. One such index has been applied widely using the distribution function catchment model, TOPMODEL, of Beven and Kirkby (1979). Validation of the spatial predictions of TOPMODEL may be affected by the algorithm used to calculate the model's topographic index. A number of digital terrain analysis (DTA) methods are therefore described for use in calculating the TOPMODEL topographic index, In(a/tanβ) (a = upslope contributing area per unit contour; tanβ = local slope angle). The spatial pattern and statistical distribution of the index is shown to be substantially different for different calculation procedures and differing pixel resolutions. It is shown that an interaction between hillslope contributing area accumulation and the analytical definition of the channel network has a major influence on calculated In(a/tanβ) index patterns. A number of DTA tests were performed to explore this interaction. The tests suggested that an ‘optimum’ channel initiation threshold (CIT) may be identified for positioning river headwaters in a raster digital terrain model (DTM). This threshold was found to be dependent on DTM grid resolution. Grid resolution is also suggested to have implications for the validation of spatial model predictions, implying that ‘optimum’ TOPMODEL parameter sets may be unique to the grid scale used in their derivation. Combining existing DTA procedures with an identified CIT, a procedure is described to vary the directional diffusion of contributing area accumulation with distance from the channel network.  相似文献   

11.
Automatically extracting drainage networks from digital elevation models coupled with the constant stream threshold value is a regular method. These extracted networks can be verified by comparing the channel initiation points with those from real networks. From the results analysed, the differences in channel initiation points will affect the network geometries, geomorphological indices and hydrological responses. This paper develops two automatic algorithms, the headwater‐tracing method and the fitness index, to trace the flow paths from headwaters to the outlet and to calculate the reasonable stream threshold. Instead of the method determined by trial and error or field survey, the accurate channel initiation points can be obtained from airborne photographs coupled with high‐resolution SPOT images for suitable drainage network extraction. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

12.
This paper addresses the effect of accurately mapping spatially heterogeneous drainage densities in high‐altitude alpine basins on Rescaled Width Functions (RWFs), used in some applications as a minimalist model of the hydrologic response. The channel network and 373 of its channel heads were mapped in the field in a high mountain catchment in the Swiss Alps. The mapped channel network is characterized by highly uneven drainage density, here described by the distribution of the length to the first channelized site computed along steepest descent from any unchannelled site. Various channel networks were extracted from a 1 m lidar‐derived digital terrain model and compared with the field‐mapped channel network using geomorphologic parameters, hillslope‐to‐channel distance and RWFs. Our results show that the channel network derived by statistical analysis of surface morphology is consistent with the field‐mapped network. Larger discrepancies were observed when the channel network was obtained with classical threshold‐based approaches relying on cumulative drainage area and local slope. The actual arrangement of the drainage densities has a significant impact on the RWFs. The discrepancy was largest between RWFs derived from classical extraction methods and RWFs derived with the field‐mapped network, indicating an inappropriate extraction of the channelled portion of the high‐altitude catchment that is a reflection of the variety of channel initiation processes. Our results suggest that spatial heterogeneity of the drainage density might play an important role in modelling streamflow generation. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

13.
Despite decades of research on the ecological consequences of stream network expansion, contraction and fragmentation, surprisingly little is known about the hydrological mechanisms that shape these processes. Here, we present field surveys of the active drainage networks of four California headwater streams (4–27 km2) spanning diverse topographic, geologic and climatic settings. We show that these stream networks dynamically expand, contract, disconnect and reconnect across all the sites we studied. Stream networks at all four sites contract and disconnect during seasonal flow recessions, with their total active network length, and thus their active drainage densities, decreasing by factors of two to three across the range of flows captured in our field surveys. The total flowing lengths of the active stream networks are approximate power‐law functions of unit discharge, with scaling exponents averaging 0.27 ± 0.04 (range: 0.18–0.40). The number of points where surface flow originates obey similar power‐law relationships, as do the lengths and origination points of flowing networks that are continuously connected to the outlet, with scaling exponents averaging 0.36–0.48. Even stream order shifts seasonally by up to two Strahler orders in our study catchments. Broadly, similar stream length scaling has been observed in catchments spanning widely varying geologic, topographic and climatic settings and spanning more than two orders of magnitude in size, suggesting that network extension/contraction is a general phenomenon that may have a general explanation. Points of emergence or disappearance of surface flow represent the balance between subsurface transmissivity in the hyporheic zone and the delivery of water from upstream. Thus the dynamics of stream network expansion and contraction, and connection and disconnection, may offer important clues to the spatial structure of the hyporheic zone, and to patterns and processes of runoff generation. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

14.
The dispersive nature of the highly sodic silts of the Triassic‐rich unit of the Góchar formation plays a fundamental role in the erosion of the Mocatán catchment badlands in Almería, where a rejuvenating pipe and incised channel network is rapidly evacuating slope materials. Referring to concepts of medium‐ and long‐term landscape evolution, and incorporating contemporary thoughts on the role of connectivity in system evolution from the geomorphological literature, this paper attempts to develop a conceptual model of the way geologic, topographic, material property and ecological factors combine to explain the complex geomorphological evolution of the site. An electronic distance measurement (EDM) survey was undertaken using a Leica TC3100, to produce a detailed topographic map. This database was supplemented by geomorphological, geological and ecological data derived from ground survey and remote sensing, and further morphometric analysis undertaken. Preferred orientations of channel segments, and the topographic distribution of pipe‐roof‐collapse features and outfalls in relation to known stratigraphic controls, suggests that, once coupled to the slope‐base channel, pipe networks develop in a systematic, sequential way. A wave of incision moving up the main channel reconnects channels with slopes, and the resulting increased hydraulic gradients on sideslopes encourage extensive deep pipe development for the first time in these materials. Once major pipe development is possible, three‐dimensional pipe networks enlarge and then collapse to form an extensive, partially coupled steep‐sided gully network. From this perspective, the coupling of the pipe to a rejuvenating channel is a significant intrinsic threshold event and the main reason that badlands have developed locally in these dispersive materials. It is concluded that erosion in this landscape will only be suppressed after a considerable period of slope‐base stability, which could allow a gradual loss of sodium from the surface by leaching or organic exchanges. Both theoretical and management implications are explored. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

15.
The increasing popularity of remote sensing techniques has created numerous options for researchers seeking spatial datasets, especially digital elevation models (DEMs), for geomorphic investigations. This yields an important question regarding what DEM resolution is most appropriate when answering questions of geomorphic significance. The highest possible resolution is not always the best choice for a particular research aim, and DEM resolution should be tailored to fit both the scale of investigation and the simplicity/complexity of modelling processes applied to the dataset. We find that DEM resolution has a significant effect on a simple model of bed load sediment connectivity in the Lockyer Valley, Queensland. We apply a simple bed load transport threshold to catchment DEMs at three different resolutions – 1 m, 5 m, and 25 m. We find that using a 1 m resolution DEM generates numerous disconnections along tributary channel networks that underestimates the sediment contributing area, i.e. effective catchment area (ECA), of seven tributary basins of Lockyer Creek. Utilizing a coarser (lower‐resolution) DEM helps eliminate erroneous disconnections, but can reduce the detail of stream network definition. We find that the 25 m resolution DEM provides the best measure of ECA for comparing sediment connectivity between tributary catchments. The utility of simple models and coarse‐resolution datasets is important for undertaking large, catchment‐scale geomorphic investigations. As catchment‐scale investigations are becoming increasingly entwined with river management and rehabilitation efforts, scientists need not embrace an ‘out with the old’ philosophy. Simple models and coarse‐resolution datasets can help better integrate geomorphic research with management strategies and provide inexpensive and quick first‐order insights into catchment‐scale processes that can help focus future management efforts. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

16.
Intensive agricultural land use in the 18th to early 20th centuries on the southeastern Piedmont resulted in substantial soil erosion and gully development. Today, many historically farmed areas have been abandoned and afforested, and such landscapes are an opportunity to study channel network recovery from disturbance by gullying. Channel initiation mapping, watershed area–slope relationships, and field monitoring of flow generation processes are used to identify channel network extent and place it in hydrologic, historical and landscape evolution context. In six study areas in the North Carolina Piedmont, 100 channel heads were mapped in fully‐forested watersheds, revealing a channel initiation relationship of 380 = AS1.27, where A is contributing area (m2) and S is local slope (m/m). Flow in these channels is generated by subsurface and overland flow. The measured relative slope exponent is lower than expected based on literature values of ~2 for forested watersheds with subsurface and overland flow, suggesting that the channel network extent may reflect a former hydrological regime. However, geomorphic evidence of recovery in channel heads within fully forested watersheds is greater than those with present day pasture. Present day channel heads lie within hollows or downslope of unchanneled valleys, which may be remnants of historical gullies, and area–slope relationships provide evidence of colluvial aggradation within the valleys. Channel network extent appears to be sensitive to land use change, with recovery beginning within decades of afforestation. Channel initiation mapping and area–slope relationships are shown to be useful tools for interpreting geomorphic effects of land use change. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

17.
Mountainous headwater streams represent a substantial proportion of the global stream network. These small streams may flow episodically, seasonally, or perennially, providing diverse values and services. Given their broad importance and growing pressures on terrestrial and aquatic resources, we must improve our understanding of the drivers of flow permanence to facilitate informed land and water management decisions. We used field observations from >10 cross-sections in each of 101 non-fish bearing, headwater streams across four geomorphic provinces in Northern California to quantify flow permanence and network connectivity during the summer low flow period in 2018. At each stream cross-section, we noted the presence or absence of streamflow and used this information to classify streams as perennial (continuous streamflow in all cross-sections) or non-perennial and connected (surface water in the most downstream cross-section) or disconnected. At each cross-section, we also quantified channel size (width and depth) and grain size. We coupled field observations with geospatial data of catchment physiography, hydrology, and climate in random forest models to investigate controls of flow permanence and network connectivity. Potential drivers of flow permanence or network connectivity included in our models were channel geometry, grain size, slope, aspect, elevation, annual and seasonal precipitation, air temperature, and topographic wetness index. We found more perennial streams in the Klamath Mountains and Sierra Nevada than in the Cascades and N. Coast regions. Streams in the Klamath were the most connected followed by streams in the N. Coast, Sierra Nevada, and Cascades. The most important variables for predicting flow permanence were channel grain size, winter 2018 precipitation, and drainage area. Comparatively, the most important variables for predicting network connectivity were winter and spring 2018 precipitation, grain size, and bankfull depth. Our study illustrated the complexity of the processes that drive flow permanence and highlighted the uncertainty in projecting the precense of water in streams across diverse regions.  相似文献   

18.
During the melting of a snowpack, snow water equivalent (SWE) can be correlated to snow‐covered area (SCA) once snow‐free areas appear, which is when SCA begins to decrease below 100%. This amount of SWE is called the threshold SWE. Daily SWE data from snow telemetry stations were related to SCA derived from moderate‐resolution imaging spectroradiometer images to produce snow‐cover depletion curves. The snow depletion curves were created for an 80 000 km2 domain across southern Wyoming and northern Colorado encompassing 54 snow telemetry stations. Eight yearly snow depletion curves were compared, and it is shown that the slope of each is a function of the amount of snow received. Snow‐cover depletion curves were also derived for all the individual stations, for which the threshold SWE could be estimated from peak SWE and the topography around each station. A station's peak SWE was much more important than the main topographic variables that included location, elevation, slope, and modelled clear sky solar radiation. The threshold SWE mostly illustrated inter‐annual consistency. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

19.
Hillslopes are thought to poorly record tectonic signals in threshold landscapes. Numerous previous studies of steep landscapes suggest that large changes in long‐term erosion rate lead to little change in mean hillslope angle, measured at coarse resolution. New LiDAR‐derived topography data enables a finer examination of threshold hillslopes. Here we quantify hillslope response to tectonic forcing in a threshold landscape. To do so, we use an extensive cosmogenic beryllium‐10 (10Be)‐based dataset of catchment‐averaged erosion rates combined with a 500 km2 LiDAR‐derived 1 m digital elevation model to exploit a gradient of tectonic forcing and topographic relief in the San Gabriel Mountains, California. We also calibrate a new method of quantifying rock exposure from LiDAR‐derived slope measurements using high‐resolution panoramic photographs. Two distinct trends in hillslope behavior emerge: below catchment‐mean slopes of 30°, modal slopes increase with mean slopes, slope distribution skewness decreases with increasing mean slope, and bedrock exposure is limited; above mean slopes of 30°, our rock exposure index increases strongly with mean slope, and the prevalence of angle‐of‐repose debris wedges keeps modal slopes near 37°, resulting in a positive relationship between slope distribution skewness and mean slope. We find that both mean slopes and rock exposure increase with erosion rate up to 1 mm/a, in contrast to previous work based on coarser topographic data. We also find that as erosion rates increase, the extent of the fluvial network decreases, while colluvial channels extend downstream, keeping the total drainage density similar across the range. Our results reveal important textural details lost in 10 or 30 m resolution digital elevation models of steep landscapes, and highlight the need for process‐based studies of threshold hillslopes and colluvial channels. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

20.
Stream network morphometrics have been used frequently in environmental applications and are embedded in several hydrological models. This is because channel network geometry partly controls the runoff response of a basin. Network indices are often measured from channels that are mapped from digital elevation models (DEMs) using automated procedures. Simulations were used in this paper to study the influence of elevation error on the reliability of estimates of several common morphometrics, including stream order, the bifurcation, length, area and slope ratios, stream magnitude, network diameter, the flood magnitude and timing parameters of the geomorphological instantaneous unit hydrograph (GIUH) and the network width function. DEMs of three UK basins, ranging from high to low relief, were used for the analyses. The findings showed that moderate elevation error (RMSE of 1·8 m) can result in significant uncertainty in DEM‐mapped network morphometrics and that this uncertainty can be expressed in complex ways. For example, estimates of the bifurcation, length and area ratios and the flood magnitude and timing parameters of the GIUH each displayed multimodal frequency distributions, i.e. two or more estimated values were highly likely. Furthermore, these preferential estimates were wide ranging relative to the ranges typically observed for these indices. The wide‐ranging estimates of the two GIUH parameters represented significant uncertainty in the shape of the unit hydrograph. Stream magnitude, network diameter and the network width function were found to be highly sensitive to elevation error because of the difficulty in mapping low‐magnitude links. Uncertainties in the width function were found to increase with distance from outlet, implying that hydrological models that use network width contain greater uncertainty in the shape of the falling limb of the hydrograph. In light of these findings, care should be exercised when interpreting the results of analyses based on DEM‐mapped stream networks. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号