共查询到18条相似文献，搜索用时 140 毫秒
1.
2.
3.
500 m口径球面射电望远镜(Five-hundred-meter Aperture Spherical Radio Telescope,FAST)是一个超大口径的可动望远镜,有三项技术创新,一是选址,二是轻型馈源索支撑,三是主动反射面。在主动反射面上,单元面板的面型和面板的出厂加工精度对电磁波在反射面的汇聚有很大影响。FAST主反射面由4 600块三角形反射面板拼接而成,每块面板为边长11 m三角形,这对FAST反射面面板的测量技术提出了更高的要求。摄影测量直接在影像上进行量测,无需接触物体本身;所摄影像信息丰富,可以从中获得所研究物体的大量几何信息和物理信息;适用于大范围、多目标测量,效率高。目前世界上最大的射电望远镜,如GBT和ARECIBO都是采用摄影测量技术进行反射面面形检测。在对现有的面型检测技术调研并试验后,提出基于数字近景摄影测量的方法,对FAST反射面11 m单元面板的面型进行检测,数分钟完成反射面板面型的一次检测,测量精度达到2.5 mm,经过调整后的单元面板的面型精度达到了3.0 mm,结果表明摄影测量应用于FAST反射面单元面板面型检测是可行的。 相似文献
4.
把抛物面天线的偏焦理论应用于FASTL波段多波束馈源系统的设计,分析了馈源喇叭横向偏焦距离与相应波束偏离角之间的关系,结合多波束射电望远镜扫描方式的要求,给出了FASTL波段多波束馈源的工作带宽、多波束馈源中相邻喇叭的间距以及喇叭口径大小的限制,并对正六边形阵列中处于不同位置的喇叭对应的波束的主瓣情况作了详细计算和分析。由此说明了FASTL波段多波束馈源采用19波束的可行性。另一方面,根据得到的工作频率带宽和喇叭口径大小的情况,对OMT和喇叭类型的选择进行了探讨。本文给出了FASTL波段多波束系统的大概轮廓,为进一步精确设计指明了方向。 相似文献
5.
6.
一种扩大FAST视场的方法 总被引：1，自引：0，他引：1
所有的大口径射电望远镜都存在这样一个问题：在其分辨率和灵敏度提高的同时，视场变小．而且口径越大，视场越小．这成为大口径望远镜不可回避的矛盾．要解决这个矛盾，可以在望远镜的焦平面上放置Ⅳ个分立馈源．让它们同时工作，这样可以看作把视场扩大了Ⅳ倍．望远镜的工作效率提高Ⅳ倍．但是这样做的缺点是——视场不连续．且馈源数目Ⅳ受到望远镜焦比(F／D)的限制．采用致密焦面阵(dense focal plane array)就可以很好地解决这个问题．致密焦面阵的单元不是喇叭口天线，而是无方向性的Vivaldi天线(Vivaldi antenna)．要把Vivaldi阵列应用到望远镜上，需要对单个Vivaldi天线和Vivaldi阵列的电性能有清楚的认识，并能根据需要来设计照明方向图．还要知道大望远镜的焦面上电磁场的分布情况，借此判断能否应用Vivaldi阵列，以及给出Vivaldi单元的分路赋权网络．主要给出了FAST的焦面场的分布情况．并说明应用Vivaldi阵列的可能性． 相似文献
7.
FAST在深空探测中的应用前景 总被引：4，自引：0，他引：4
FAST（Five hundred meters Aperture Spherical Telescope)拟利用贵州省的喀斯特洼地，建立世界上最大的500米口径的球面射电望远镜。主动反射面新概念的提出，实现了望远镜的宽频带和全偏振能力；馈源及支撑系统简化的方案，使FAST对天体和航天器的跟踪范围得到很大的补充。分析预研中的FAST的测控功能，并论证其在未来深空网（DSN）中的重要作用和地位及开展国际合作的可能性。 相似文献
8.
9.
10.
《中国科学院上海天文台年刊》2014,(0)
上海65米射电望远镜是亚洲最大、全方位可转动的大型射电望远镜,在国内首次配备主动面系统。对主动面系统应用的关键技术——偏焦全息测量技术在上海65米射电望远镜中的初步应用情况进行介绍。首先,介绍常用的天线主反射面面型测量方法。接着,介绍偏焦全息测量技术的应用方法。采用飞行扫描,利用X波段致冷接收机和连续谱终端,将射电源3C84作为信号源,通过移动副反射面测量得到一幅聚焦天线方向图和两幅偏焦天线方向图。将三幅天线方向图作为偏焦全息测量算法的输入,获得天线口径面相位分布的Zernike系数。依据Zernike系数计算得到天线主反射面型面误差的均方根值(root mean square,RMS),该均方根值与前期照相测量的结果基本相符。最后,对今后的改进工作进行展望。 相似文献
11.
Shu-Mo Gong 《Astrophysics and Space Science》1986,118(1-2):15-20
This paper covers the main aspects of three new optical telescopes: a 1.26 m aperture one for use in the infrared, a 1.56 m aperture one for astrometry, and a 2.16 m reflector for general astrophysical work. It also briefly mentions the 13.7 m telescope designed for the mm wavelength band, the first VLBI in China and the meter wavelength aperture synthesis telescope. All these telescopes, optical and radio, are now being built in China.Paper presented at the IAU Third Asian-Pacific Regional Meeting, held in Kyoto, Japan, between 30 September–6 October, 1984. 相似文献
12.
《天文和天体物理学研究(英文版)》2021,(10)
The self-weight of a large fully-steerable radio telescope is one of the important factors affecting its performance. In the existing reflector system scheme, the problem of surface accuracy caused by its large and heavy structure has seriously restricted the application and implementation of large radio telescopes.Therefore, a new mesh structure scheme for a large fully-steerable radio telescope reflector is proposed in this paper. This scheme is based on a homogenized mesh back-up structure in the form of a quasi-geodesic grid and regular quasi-tri-prism or tetrahedron, which can significantly reduce the structural complexity and self-weight of the reflector under the condition that the reflector can meet the desired performance requirements. Finally, the feasibility and rationality of the scheme are evaluated by numerical simulation analysis, which has significant advantages and provides a new design for the reflector of a large fullysteerable radio telescope. 相似文献
13.
射电望远镜的发展和前景 总被引：1，自引：0，他引：1
在近代科学技术发展的基础上诞生和成长起来的射电天文学已经走过了66年的历程,作为射电天文学主要探测工具的射电望远镜有了长足的进步,面临21世纪人类社会和自然科学技术包括天文学发展的挑战,射电望远镜及射电天文学将迈出新的步伐．从射电天文学和射电望远镜发展的关系、射电望远镜几个主要发展方向和目前水平、自90年代以来逐步勾画而明确起来的未来发展方向等方面阐明了射电望远镜的发展和前景,以作为我国发展新一代射电望远镜的参考． 相似文献
14.
《天文和天体物理学研究(英文版)》2020,(1)
This paper proposes an active sub-reflector suitable for large radio telescopes, which can compensate both of the deformation of the main reflector and sub-reflector position offsets. The mathematical formula of the main reflector deformation compensated by the sub-reflector is deduced based on Cassegrain and Gregory antenna structures. The position of the sub-reflector is adjustable to compensate for defocusing errors on high and low elevations, which are mainly caused by the deformation of the sub-reflector supporting legs. In this paper, the method of obtaining the optimum position of the sub-reflector from the aperture phase by the interferometric method is introduced. The actual measurement is verified on the Tianma 65 m radio telescope, which provides a new way to diagnose the position error of the sub-reflector. 相似文献
15.
16.
随着毫米波天文学和空间通信的重要性日益提高, 对天线性能提出了越来越高的要求, 而天线性能往往受到其反射器表面精度的限制. 微波全息技术是一种快速有效的检测反射面天线表面轮廓的测量技术. 通过微波全息测量得到天线口径场, 计算天马65m射电望远镜反射面与理想抛物面的偏差. 天马65m射电望远镜的主反射面板是放射状的, 有14圈. 面板的每个角都固定在面板下方促动器的螺栓上进行上下移动, 且相邻面板交点处的拐角共用一个促动器. 采用平面拟合的方法可以计算各块面板拐角处的调整值, 但是同一个促动器会得到4个不同的调整量. 通过平面拟合, 同时以天线照明函数为权重的平差计算方法得到相邻面板拐角的一个平差值, 即天马65m射电望远镜1104个促动器的最佳调整值. 通过多次调整和新算法的应用, 天马65m射电望远镜反射面的面形精度逐渐提高到了0.24mm. 相似文献
17.
Hai-Yan Zhang Ming-Chang Wu You-Ling Yue Heng-Qian Gan Hao Hu Shi-Jie Huang 《天文和天体物理学研究(英文版)》2018,(4)
An active reflector is one of the three main innovations incorporated in the Five-hundredmeter Aperture Spherical radio Telescope(FAST).The deformation of such a huge spherically shaped reflector into different transient parabolic shapes is achieved by using 2225 hydraulic actuators which change the position of the 2225 nodes through the connected down tied cables.For each different tracking process of the telescope,more than 1/3 of these 2225 actuators must be in operation to tune the parabolic aperture accurately and meet the surface error restriction.This means that some of these actuators are inevitably located within the main beam of the receiver,and Electromagnetic Interference(EMI)from the actuators must be mitigated to ensure the scientific output of the telescope.Based on the threshold level of interference detrimental to radio astronomy described in ITU-R Recommendation RA.769 and EMI measurements,the shielding efficiency(SE)requirement for each actuator is set to be 80 d B in the frequency range from 70 MHz to 3 GHz.Therefore,Electromagnetic Compatibility(EMC)was taken into account in the actuator design by measures such as power line filters,optical fibers,shielding enclosures and other structural measures.In 2015,all the actuators had been installed at the FAST site.Till now,no apparent EMI from the actuators has been detected by the receiver,which demonstrates the effectiveness of these EMC measures. 相似文献
18.
《天文和天体物理学研究(英文版)》2020,(1)
FAST, the largest single-dish radio telescope in the world, has a 500-meter diameter main reflector and a 300-meter diameter illuminated area. It has a main reflector that can vary its shape, which continuously changes the shape of the illuminated area in reflector into a paraboloid. In this article, we propose a quasiCassegrain system for FAST. The detailed design results are provided. Such a quasi-Cassegrain system only needs to add a 14.6-meter diameter secondary reflector, which is close to the size of the feed cabin. The distance from the secondary reflector to the focus is only 5.08 m, and it has excellent image quality. In this quasi-Cassegrain system, the shape of the illuminated area in the main reflector continuously changes into an optimized hyperboloid. Using this quasi-Cassegrain system from frequency 0.5 GHz to 8 GHz, the multi-beam system can include 7 to 217 feeds. If this system is used in combination with Phased Array Feed(PAF) technology, more multi-beam feeds or a higher working frequency can be used. 相似文献