首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 515 毫秒
1.
This study focuses on the Lower-Middle Miocene syn-orogenic flysch deposits of the Zoumi basin to infer source area paleoclimatic conditions, the intensity of source rocks paleoweathering, and mechanical sorting and recycling effects. The mudrocks are enriched in Al2O3, Fe2O3, CaO, and TiO2 relative to PAAS and depleted in the other mobile major elements. There are high positive correlations between SiO2, Al2O3, and TiO2 and negative correlations between SiO2 and CaO. Geochemically, the mudstones are mainly classified as shales, Fe-shales, and wackes. Various discriminant diagrams were used to reveal the inferred tectonics, source paleoweathering intensity, and paleoclimatic conditions. Chemical index of alteration (CIA) and chemical index of weathering (CIW) values for Lower-Middle Miocene vary from 50 to 80% indicating low to moderate degree of source area weathering compatible with non-steady-state weathering under wet and humid paleoclimatic conditions. Locally (Zoumi mid-section) CIA values are higher (>?80) reflecting intense source area weathering, which may be attributed to high tectonic impulses and more humid conditions during deposition. The combination of ICV-CIA, Al2O3-Zr-TiO2, and Th/Sc-Zr/Sc values suggests the bulk rock is chemically immature and has experienced modest physical sorting and recycling reflecting little transportation until the final deposition.  相似文献   

2.
《International Geology Review》2012,54(10):1196-1214
ABSTRACT

The distinct basin and range tectonics in southeast China were generated in a crustal extension setting during the late Mesozoic. Compared with the adjacent granitoids of the ranges, the redbeds of the basins have not been well characterized. In this article, provenance, source weathering, and tectonic setting of the redbeds are investigated by petrographic and geochemical studies of sandstone samples from the Late Cretaceous Guifeng Group of the Yongchong Basin in the Gan-Hang Belt, southeast China. Detrital grains are commonly subangular to subrounded, poorly sorted, and are rich in lithic fragments. The variable pre-metasomatic Chemical Index of Alternation (CIA* = 62–85), Chemical Index of Weathering (CIW = 70.90–98.76, avg. 85.62), Plagioclase Index of Alteration (PIA = 60.23–98.35, avg. 79.91), and high Index of Compositional Variability (ICV = 0.67–3.08, avg. 1.40) values collectively suggest an overall intermediate degree of chemical weathering and intense physical erosion of the source rocks, but a relatively decreased degree of chemical weathering during the late stage (Lianhe Formation) of the Guifeng Group is observed. Several chemical ratios (e.g. Al2O3/TiO2, La/Th, Cr/Th, Th/Sc, Zr/Sc) also suggest a dominant felsic source nature, significant first-cycle sediment supply, and low sedimentary recycling. Such features are consistent with active extension tectonic setting. Sandstone framework models and geochemical characteristics suggest the provenance is related to passive margin (PM), active continental margin (ACM), and continental island arc (CIA) tectonic settings. Sediment derivation from the Neoproterozoic metamorphic rocks and Silurian–Devonian granites indicates a PM provenance, whereas sediments derived from the Early Cretaceous volcanic-intrusive complexes suggest an ACM and CIA nature. Therefore, the Late Cretaceous redbeds were deposited in a dustpan-like half-graben under the back-arc extension regime when southeast China was possibly influenced by northwestward subduction of the Palaeo-Pacific plate beneath East Asia.  相似文献   

3.
The provenance and tectonic setting of sandstones from the Bombouaka Group of the Voltaian Supergroup, in the northeastern part of Ghana, have been constrained from their petrography and whole-rock geochemistry. Modal analysis carried out by point-counting sandstone samples indicates that they are quartz arenites. The index of compositional variability values and SiO2/Al2O3, Zr/Sc, and Th/Sc values indicates that the sediments are mature. The sandstones are depleted in CaO and Na2O. They are, however, enriched in K2O, Ba, and Rb relative to average Neoproterozoic upper crust. These characteristics reflect intense chemical weathering in the source region as proven by high weathering indices (i.e., CIA, PIA, and CIW). In comparison with average Neoproterozoic upper crust, the sandstones show depletion by transition metals and enrichment by high field strength elements. They generally show chondrite-normalized fractionated light rare-earth element (LREE) patterns (average LaN/SmN = 4.40), negative Eu anomalies (average Eu/Eu* = 0.61), and generally flat heavy rare-earth elements (HREE) (average GdN/YbN = 1.13). The sandstones have La/Sc, Th/Sc, La/Co, Th/Co, Th/Cr, and Eu/Eu* ratios similar to those of sandstones derived from felsic source. Mixing calculations using the rare-earth elements (REE) suggests 48% tonalite–trondhjemite–granodiorite and 52% granite as possible proportions for the source of the sandstones. Both the petrographic and whole-rock geochemical data point to a passive margin setting for the sandstones from the Bombouaka Group.  相似文献   

4.
An integrated petrographic and geochemical study of the sandstones of the Maastrichtian-aged in the Orhaniye (Kazan-Ankara-Turkey) was carried out to obtain more information on their provenance, sedimentological history and tectonic setting. Depending on their matrix and mineralogical content, the Maastrichtian sandstones are identified as lithic arenite/wacke. The Dikmendede sandstones derived from types of provenances, the recycled orogen and recycled transitional. The chemical characteristics of the Dikmendede sandstones, i.e., fairly uniform compositions, high Th/U ratios (>3.0), negative Eu anomalies (Eu/Eu* 0.72–0.99) and Th/Sc ratios (mostly less than 1.0), favor the OUC (old upper continental crust) provenance for the Dikmendede sandstones. The SiO2/Al2O3, Th/Sc (mostly <1.0) and La/Sc (<4.0) ratios are; however, slightly lower than typical OUC, and these ratios may suggest a minor contribution of young arc-derived material. The rare earth element (REE) pattern, and La/Sc versus Th/Co plot suggests that these sediments were mainly derived from felsic source rocks. The Dikmendede sandstones have high Cr (123–294 ppm) and Ni (52–212 ppm) concentrations, Cr/Ni ratio of 1.93, and a medium correlation coefficient between Cr and Ni and corresponding medium to high correlation of both (Cr and Ni, respectively) elements with Co. These relationships indicate a significant contribution of detritus from ophiolitic rocks. As rare earth element data are available for the Dikmendede sandstones, the Eu/Eu* is compared with LaN/YbN. Samples plot in the area of overlapping between continental collision, strike-slip and continental arc basins. The predominantly felsic composition of the Dikmendede sandstones is supported by the REE plots, which show enriched light REE, negative Eu anomaly and flat or uniform heavy REE. The Dikmendede sandstones have compositions similar to those of the average upper continental crust and post-Archean Australian shales. This feature indicates that the sediments were derived mainly from the upper continental crust. The Dikmendede sandstones have chemical index of alteration (CIA) values of 28–49, with an average of 40 indicating a low degree of chemical weathering in the source area. The compositional immaturity of the analyzed sandstone samples is typical of subduction-related environments, and their SiO2/Al2O3 and K2O/Na2O ratios and Co, Sc, Th and Zr contents reflect their oceanic and continental-arc settings. The Dikmendede sandstones were developed as flysch deposits derived from mixed provenance in a collision belt.  相似文献   

5.
ABSTRACT

The distinct basin and range tectonics in Southeast China were generated by crustal extension associated with subduction of the Palaeo-Pacific plate during the late Mesozoic. Compared with adjacent granitoids of the ranges, the redbeds of the basins have not been well characterized. In this article, provenance, source weathering, and tectonic setting of the redbeds are investigated by petrographic and geochemical studies of sandstones from the Late Cretaceous Guifeng Group in the Yongchong Basin, Southeast China. Detrital grains are subangular to subrounded, poorly sorted, and rich in lithic fragments. Variable Chemical Index of Alternation values (59.55–79.82, avg. 66.79) and high Index of Compositional Variability (ICV) values (0.67–3.08, avg. 1.40) indicate an overall low degree of chemical weathering and rapid physical erosion of source rocks. Such features are consistent with an active extension tectonic setting. Other chemical indices (e.g. Al2O3/TiO2, Th/U, Cr/Th, Th/Sc, Zr/Sc) also suggest significant first-cycle sediment input to the basin and a dominant felsic source nature. Thus, the Guifeng Group possibly underwent moderate to low degrees of weathering upwards. Sandstone framework models and geochemical characteristics suggest the provenance was likely a combination of passive margin (PM) and active continental margin (ACM) with minor continental island arc (CIA) tectonic settings. Sediment derivation from Neoproterozoic metamorphic rocks and Cambrian to Triassic granitoids indicates PM provenance, whereas sediments derived from Jurassic to Cretaceous granitoids suggest ACM and CIA nature. Therefore, the Late Cretaceous redbeds were deposited in a dustpan-like half-graben basin under the back-arc extension regime when Southeast China was possibly influenced by northwestward subduction of the Palaeo-Pacific plate beneath East Asia.  相似文献   

6.
Sandstones of Jhuran Formation from Jara dome, western Kachchh, Gujarat, India were studied for major, trace and rare earth element (REE) geochemistry to deduce their paleo-weathering, tectonic setting, source rock characteristics and provenance. Petrographic analysis shows that sandstones are having quartz grains with minor amount of K-feldspar and lithic fragments in the modal ratio of Q 89:F 7:L 4. On the basis of geochemical results, sandstones are classified into arkose, sub-litharenite, wacke and quartz arenite. The corrected CIA values indicate that the weathering at source region was moderate to intense. The distribution of major and REE elements in the samples normalized to upper continental crust (UCC) and chondrite values indicate similar pattern of UCC. The tectonic discrimination diagram based on the elemental concentrations and elemental ratios of Fe2O3 + MgOvs. TiO2, SiO2 vs. log(K2O/Na2O), Sc/Cr vs. La/Y, Th–Sc–Zr/10, La–Th–Sc plots Jhuran Formation samples in continental rift and collision settings. The plots of Ni against TiO2, La/Sc vs. Th/Co and V–Ni–Th ?10 reveals that the sediments of Jhuran Formation were derived from felsic rock sources. Additionally, the diagram of (Gd/Yb) N against Eu/Eu ? suggest the post-Archean provenance as source possibly Nagar Parkar complex for the studied samples.  相似文献   

7.
Geochemical compositions of the Lower Cambrian Niutitang Formation shales in the southeastern Yangtze Platform margin were investigated for provenance, tectonic setting, and depositional environment. The shale samples are characterized by higher abundances of large ion lithophile elements (Cs, Ba, and Pb), lower abundances of high field strength elements (Cr, Sc, and Co) and transition elements (Th, Zr, Hf, Nb, and Ta) relative to average shale. North American shale composition (NASC) -normalized rare earth element (REE) patterns are observed, with negative Ce anomalies, negative Eu anomalies, and positive Y anomalies. The chemical index of alteration (CIA) varies from 68.67–74.93. Alkali and alkaline element contents and CIA values suggest that the source rocks have undergone moderate weathering. The index of compositional variability (ICV), Zr/Sc and Th/Sc ratios vary from 0.53 to 1.07, 5.31 to 8.18 and 0.52–1.02, respectively. ICV values and relationships between Zr/Sc and Th/Sc ratios indicate negligible sedimentary recycling. The Al2O3/TiO2 (14–26) and TiO2/Zr (56–77) ratios imply that the source rocks of the investigated shales had intermediate igneous compositions. However, Cr/V ratios and a La/Th–Hf discrimination diagram suggest that the intermediate compositional signal of the source rocks was derived from a mixture of 75% mafic and 25% felsic igneous rocks rather than intermediate igneous rocks. The major source was the Jiangnan continental island arc with bimodal igneous rocks, lying to the south of the study area, together with a contribution from granites and gneisses uplifted and eroded in the Yangtze Block. Discrimination of tectonic setting using major and trace elements indicates that the source rocks originated in a transitional setting from active continental to passive margin, consistent with the failed intracontinental rift model for the evolution of the South China plate. The Niutitang Formation shales were deposited in a rift basin setting under conditions of anoxic bottom water in a redox-stratified water column, with organic-rich shales prospective for shale-gas production being found in deep-water downslope and basin environments rather than the shallow-water shelf.  相似文献   

8.
Petrological and geochemical studies have been carried out on Pulivendla and Gandikota Quartzite from Chitravati Group of Cuddapah Supergroup to decipher the provenance and depositional environment. Both the units are texturally mature with sub-rounded to well-rounded and moderately to well-sorted grains. Majority of the framework grains are quartz, in the form of monocrystalline quartz, followed by feldspars (K-feldspar and plagioclase), mica, rock fragments, heavy minerals, with minor proportion of the matrix and cement. Based on major element geochemical classification diagram, Pulivendla Quartzite is considered as quartz-arenite and arkose to sub-arkose, whereas Gandikota Quartzite falls in the field of lith-arenite and arkose to sub-arkose. Weathering indices like CIA, PIA, CIW, ICV, Th/U ratio and A–CN–K ternary diagram suggest moderate to intense chemical weathering of the source rocks of these quartzites. Whole rock geochemistry of quartzites indicate that they are primarily from the first-cycle sediments, along with some minor recycled components. Also their sources were mostly intermediate-felsic igneous rocks of Archean age. The tectonic discrimination plots, Th–Sc–Zr/10 of both these formations reflect active to passive continental margin setting. Chondrite-normalized rare earth element (REE) patterns, and various trace element ratios like Cr/Th, Th/Co, La/Sc and Th/Cr indicate dominantly felsic source with minor contribution from mafic source. Th/Sc ratios of Pulivendla and Gandikota Quartzite are in close proximity with average values of 2.83, 3.45 respectively, which is higher than AUCC (\(\hbox {Th/Sc}=0.97\)), demonstrating that the contributions from more alkali source rocks than those that contributed to AUCC.  相似文献   

9.
Tertiary sandstones collected from southwest Sarawak, Malaysia, were analyzed to decipher their provenance, weathering, and tectonic setting. The studied sandstones have a sublitharenite composition and are dominantly composed quartz with little mica and feldspar, and a small amount of volcanic fragments. These sandstones were generally derived from quartz-rich recycled orogenic sources. They have relatively high SiO2 content with low Na2O, CaO, MnO, and MgO contents. Values of Chemical Index of Alteration (CIA) of these rock samples vary from 71 to 93, with an average of 81, implying intense chemical alteration during weathering. A felsic igneous source is suggested by a low concentration of TiO2 compared to CIA, enrichment of Light Rare Earth Elements, depletion of Heavy Rare Earth Elements, and negative Eu anomalies. A felsic origin is further supported by a Eu/Eu* range of 0.65–0.85 and high Th/Sc, La/Sc, La/Co, and Th/Co ratios. This work presents the first reported geochemical data of Tertiary sandstones of the Sarawak Basin. These data led us to conclude that the sandstones were dislodged from recycled orogenic sources and deposited in a slowly subsiding rifted basin in a passive continental tectonic setting.  相似文献   

10.
敦煌造山带南部红柳峡混杂带基质的研究,为认识敦煌造山带的形成和演化提供了新的依据。本文从沉积学、地球化学和年代学等方面系统讨论了该混杂带基质的特征和形成环境。结果显示,基质的岩石类型主要包括变泥质岩(云母石英片岩)和变质砂岩,普遍发生强烈变形。局部弱变形变质的基质仍保留有原生沉积构造(如T_(ab)、T_(de)、T_(bde)组合的鲍马序列),反映原岩是一套浊积岩复理石。显微岩相学特征显示,基质碎屑组分以长石、石英和岩屑为主,长石和岩屑含量较高,分别为47%和27%,反映大量火成岩物质的加入,且碎屑颗粒的分选性和磨圆度较差,说明搬运距离较近。地球化学方面,低的化学蚀变指数(CIA=49~67),反映复理石基质物源区母岩经历的风化程度较低。高的成分变化指数(ICV0.8)以及Zr/Sc-Th/Sc投图结果显示,沉积物再循环程度低,为近物源区的初次沉积。基质Sc、Cr、Co、Ni含量低,Eu/Eu*、La/Sc、Th/Sc、La/Co、Th/Co和Cr/Th等元素比值类似于来自长英质源区的沉积物,暗示其物源区母岩以中-酸性岩石为主。La/Sc-Ti/Zr和Th-ScZr/10投图结果显示,复理石基质形成于陆缘弧或活动大陆边缘构造背景。弱变形浅变质砂岩的碎屑模式表明,基质的物源来自"切割型弧-过渡型弧"源区。综上,红柳峡混杂带基质在碎屑组成方面,以再循环程度低、近物源堆积的"切割型弧-过渡型弧"源区长英质碎屑组分为主,在沉积构造方面,发育鲍马序列和深水块体搬运沉积(MTD)构造,表明基质形成于陆缘弧或活动大陆边缘的俯冲带海沟环境。碎屑锆石年代学显示三组年龄:2300Ma、1850Ma和423Ma,结合区域地质背景分析,初步认为物源碎屑可能来自混杂带北侧的三危山弧和东巴兔-蘑菇台弧的古生代花岗岩类以及俯冲折返的变质基性岩岩块。复理石基质的变质砂岩中获得的最年轻的岩浆碎屑锆石年龄为389Ma,说明该砂岩形成于中泥盆世之后,暗示敦煌造山带南部红柳峡地区洋盆尚未俯冲完毕,碰撞作用尚未开始。  相似文献   

11.
The mineralogical and geochemical characteristics of the Upper Triassic Baluti shale from the Northern Thrust Zone (Sararu section) and High Folded Zone (Sarki section) Kurdistan Region, Iraq, have been investigated to constrain their paleoweathering, provenance, tectonic setting, and depositional redox conditions. The clay mineral assemblages are dominated by kaolinite, illite, mixed layers illite/smectite at Sararu section, and illite > smectite with traces of kaolinite at Sarki. Illite, to be noted, is within the zone of diagenesis. The non-clay minerals are dominated by calcite with minor amounts of quartz and muscovite in Sararu shale; and are dominated by dolomite with amounts of calcite and quartz in Sarki shale. Baluti shale is classified as Al-rich based on major and minor elements. The chemical index of alteration (CIA) is significantly higher in the Sararu than the Sarki shales, suggesting more intense weathering of the Sararu than the Sarki shales. The index of compositional variability (ICV) of the Sararu shale is less than 1 (suggesting it is compositionally mature and was deposited in a tectonically quiescent setting). More than 1 for Sarki shales (suggest it is less mature and deposited in a tectonically active setting). Most shale of the Baluti plot parallel and along the A-K line in A-CN-K plots suggest intense chemical weathering (high CIA) without any clear-cut evidence of K-metasomatism. Clay mineral data, Al enrichment, CIA values, and A-CN-K plot suggest that the source area experienced high degree of chemical weathering under warm and humid conditions, especially in Sararu. Elemental ratios critical of provenance (La/Sc, Th/Sc, Th/Cr, Th/Co, Ce/Ce*PN, Eu/Eu*PN, and Eu/Eu*CN) shows slight difference between the Sararu and Sarki shales; and the ratios are similar to fine fractions derived from the weathering of mostly felsic rocks. The Eu/Eu* CN, Th/Sc, and low K2O/Al2O3 ratios of most shales suggest weathering from mostly a granodiorite source rather than a granite source, consistent with a source from old upper continental crust. Discrimination diagrams based on major and trace element content point to a role of the felsic-intermediate sources for the deposition of Baluti Formation, and probably mixed with mafic source rocks at Sararu section. The chondrite-normalized rare earth elements (REE) patterns are similar to those of PAAS, with light REE enrichment, a negative Eu anomaly, and almost flat heavy REE pattern similar to those of a source rock with felsic components. The source of sediments for the Baluti Formation was likely the Rutba Uplift and/or the plutonic-metamorphic complexes of the Arabian Shield located to the southwest of the basin; whereas the Sararu shale was affected by the mafic rocks of the Bitlis-Avroman-Bisitoun Ridge to the northeast of Arabian Plate. The tectonic discrimination diagrams, as well as critical trace and REE characteristic parameters imply rift and active setting for the depositional basin of the shale of Baluti Formation. The geochemical parameters such as U/Th, V/Cr, V/Sc, and Cu/Zn ratios indicate that these shales were deposited under oxic environment and also show that Sarki shale was deposited under more oxic environment than Sararu.  相似文献   

12.
Major element and some trace element compositions (including the REE) of shales, carbonate-rich shales, and limestones of Late Cretaceous age have been analyzed at two outcrops near Pueblo, CO. Elemental ratios that are characteristic of the provenance of terrigenous debris that are the least variable with changing percent acid insoluble residue vs. percent calcite are Th/Cr, La/Co, (La/Lu)cn, and Eu/Eu*. The Ce/Ce*, La/Sc, and La/Cr ratios, however, are only constant when greater than 30% of a sample is composed of acid insoluble residue. At less than 30% acid insoluble residue, these elemental ratios increase markedly. The Th/Co and Th/Sc ratios are fairly constant from nearly 0% to about 60% acid-insoluble residue. Above 60% residue, these ratios increase due to the high concentration of Th in the Graneros to Hartland shales at Everhart Ranch. The average of the Th/Co, Th/Sc, Th/Cr, La/Co, La/Sc, and La/Cr ratios are similar to those of the MCS (mid-continent shales) and PAAS (Post-Archean Australian shales). Thus, these carbonate-rich to carbonate poor rocks analyzed in this study contain terrigenous debris that has been derived from granitoids similar to those that supplied debris to the MCS and PAAS. The Ce/Ce* ratios are lower and the Mn* (Mn*=log[(Mnsample/Mnshales)/(Fesample/Feshales)]) values are more positive in the more calcite-rich Bridge Creek and Ft. Hays limestones than in the other units, suggesting that they formed in an oxidizing environment. The Ce/Ce* are the highest and the Mn* values are the most negative in the Graneros to Hartland shales, suggesting that they formed under more reducing conditions.The elemental concentration of one sample relative to that of another sample over a few meters distance usually vary in small amounts (e.g., medians of the ratios of the same elements between adjacent samples ranges from 1.06 to 1.70). However, the ratio of elemental concentrations between adjacent samples can sometimes be quite large. The least variation of elemental ratios between adjacent samples often occurs within the more carbonate-poor shales; the greatest variation occurs within the limestones. Thus, trying to decipher local movement of elements due to metamorphism in similar carbonate shale-limestone sequences should be done cautiously since local elemental variation due to sedimentary processes can be large.  相似文献   

13.
The Trichinopoly Group (later redesignated as Garudamangalam) has unconformable relationship with underlying Uttatur Group and is divided into lower Kulakanattam Formation and upper Anaipadi Formation. These calcareous sandstones are analysed major, trace and rare earth elements (REEs) to find out CIA, CIW, provenance and tectonic setting. The silica content of fossiliferous calcareous sandstone show wide variation ranging from 12.93 to 42.56%. Alumina content ranged from 3.49 to 8.47%. Higher values of Fe2O3 (2.29–22.02%) and low MgO content (0.75–2.44%) are observed in the Garudamangalam Formation. CaO (23.53–45.90) is high in these sandstones due to the presence of calcite as cementing material. Major element geochemistry of clastic rocks (Al2O3 vs. Na2O) plot and trace elemental ratio (Th/U) reveal the moderate to intense weathering of the source rocks. The Cr/Zr ratio of clastic rocks reveal with an average of 1.74 suggesting of felsic provenance. In clastic rocks, high ratios of \(\sum \)LREE/\(\sum \)HREE, La/Sc, Th/Sc, Th/Co, La/Co and low ratios of Cr/Zr, and positive Eu anomaly ranges from (Eu/Eu* = 1.87–5.30) reveal felsic nature of the source rocks.  相似文献   

14.
Lenses of radioactive Quartz Pebble Conglomerates (QPC) and associated quartzites are exposed along western margin of Archean Bonai Granite in Singhbhum-Orissa Craton, eastern India intermittently spreading over a strike length of 8–10 km. QPCs are radioactive while quartzites are mostly non-radioactive in nature. The purpose of the research is to investigate and characterize the radioactive QPC and quartzites geochemically to decipher their paleo-weathering conditions, provenance characteristics and possible tectonic setting of deposition. Geochemical data suggest moderate to high chemical weathering conditions in the provenance areas of QPC and quartzites. Major, trace and REE data indicate predominantly felsic to partly mafic-ultramafic sources for the deposition of radioactive Quartz Pebble Conglomerates from the surrounding Archean terrain.Elevated values of Th, U, Pb, La, Ce, Y and low Sc with high critical trace elemental ratios of Th/Sc, La/Sc, Th/Cr and Zr/Sc in radioactive QPC indicate their derivation from felsic igneous source. Low concentration of Th and Sc in quartzites compared to QPC and their variable Th/Sc ratios indicate both felsic and mafic sources for quartzites, albeit their preferential felsic affiliation. Higher Cr/Th ratios in quartzites (18.4), moderate Cr/Th in QPC (5.42), low to moderate Y/Ni in QPC (0.36–12.4) and quartzite (0.29–1.88), along with Au ranging from 30 to 1527 ppb, Pt up to 188 ppb and 682 ppb in QPC and quartzites respectively point towards some contribution from mafic-ultramafic source as well. REE patterns and in particular negative Eu anomalies for both QPC and quartzites further support their derivation from felsic rocks and could possibly linked to some of the phases of Archean Singhbhum Granite and Bonai Granite. Granitic to pegmatitic source for QPC is also revealed by the presence of rounded to sub-rounded monazite, zircon and thorian-uraninite grains in their matrix. Study indicates that QPC and quartzites were deposited in a passive margin tectonic setting developed during Archean between a span of 3.3 and 3.16 Ga along the western margin of Bonai Granite when the reducing condition was prevalent as indicated by their low Th/U ratios (<4.0) and presence of detrital grains of uraninite and pyrite in QPC. Radioactive QPC from western margin of Archean Singhbhum-Orissa Craton bears broad resemblance with QPC from Witwatersrand basin of South Africa and Elliot Lake, Canada and thus appears to be ideal sites for exploring QPC hosted U (+Au-PGE) mineralization in the analogous areas.  相似文献   

15.
The Upper Jurassic Tordillo Formation is exposed along the western edge of the Neuquén Basin (west central Argentina) and consists of fluvial strata deposited under arid/semiarid conditions. The pebble composition of conglomerates, mineralogical composition of sandstones and pelitic rocks, and major- and trace-element geochemistry of sandstones, mudstones, and primary pyroclastic deposits are evaluated to determine the provenance and tectonic setting of the sedimentary basin. Conglomerates and sandstones derived almost exclusively from volcanic sources. The stratigraphic sections to the south show a clast population of conglomerates dominated by silicic volcanic fragments and a predominance of feldspathic litharenites. This framework composition records erosion of Triassic–Jurassic synrift volcaniclastic rocks and basement rocks from the Huincul arch, which was exhumed as a result of Late Jurassic inversion. In the northwestern part of the study area, conglomerates show a large proportion of mafic and acidic volcanic rock fragments, and sandstones are characterised by a high content of mafic volcanic rock fragments and plagioclase. These data suggest that the source of the sandstones and conglomerates was primarily the Andean magmatic arc, located west of the Neuquén Basin. The clay mineral assemblage is interpreted as the result of a complex set of factors, including source rock, climate, transport, and diagenesis. Postdepositional processes produced significant variations in the original compositions, especially the fine-grained deposits. The Tordillo sediments are characterised by moderate SiO2 contents, variable abundances of K2O and Na2O, and a relatively high proportion of ferromagnesian elements. The degree of chemical weathering in the source area, expressed as the chemical index of alteration, is low to moderate. The major element geochemistry and Th/Sc, K/Rb, Co/Th, La/Sc, and Cr/Th values point to a significant input of detrital volcanic material of calcalkaline felsic and intermediate composition. However, major element geochemistry is not useful for interpreting the tectonic setting. Discrimination plots based on immobile trace elements, such as Ti, Zr, La, Sc, and Th, show that most data lie in the active continental margin field. Geochemical information is not sufficiently sensitive to differentiate the two different source areas recognized by petrographic and modal analyses of conglomerates and sandstones.  相似文献   

16.
We present a modified model for the paleogeographic evolution of Mexico during Early and Late Jurassic time that is constrained by the tectonic setting and the weathering conditions of the Early Jurassic Huayacocotla Formation and Late Jurassic Alamitos Sandstone basins in state San Luis Potosí in central Mexico. Framework petrography constrains feldspato-quartzose sandstone (mean of Q68F22L10) and litho-quartzose (mean of Q75F6L19) sandstone compositions for the two units, respectively. The abundant lithic fragments are totally dominated by volcanic fragments. Quartz cathodoluminescence colours and textures from the Alamitos Sandstone supports a large input of volcanic material, but also indicates the presence of metamorphic quartz. Similarly, the geochemical composition is more mafic for the Huayacocotla Formation (Th/Sc: ˜0.6 and Cr/Th: ˜10) than for the Alamitos Sandstone (Th/Sc: ˜1.1 and Cr/Th: ˜48). Also the weathering conditions were less intense during the Early (CIA: ˜60, PIA: ˜61) than the Late Jurassic (CIA ˜85, PIA ˜97). Well preserved lithic fragments and feldspar grains, particularly in the Huayacocotla Formation, indicate that weathering indeed was minor for this unit. We interpret the difference between the two units as a combined result of climate change and tectonic setting. During the Early Jurassic, transport of volcanic detritus probably dominated from the active Nazas arc in the west. Later, additional sources from the metamorphic basement of Mexico were included. During Late Jurassic time strike-slip faulting related to the opening of the Gulf of Mexico may have re-directed the sediment-transport systems. Finally, the degree of weathering was affected by drastic climatic change from arid to humid tropical conditions during the Middle to Upper Jurassic, possibly related to the first incursions of Gulf of Mexico marine environments linked to the rotation of the Yucatan block.  相似文献   

17.
Petrographical and geochemical studies of Silurian Niur sandstones, Derenjal Mountains, Central Iran, were carried out to infer their provenance and tectonic setting. Modal analysis data of 37 medium sand size and well-sorted samples revealed that most quartz is composed of monocrystalline grains with straight to slightly undulos extinction and about 3 % polycrystalline quartz has inclusions, such as rutile needles. The sandstones are classified as quartzarenite, sublitharenite, and subarkose types based on framework composition and geochemistry. Petrographic studies reveal that these sandstones contain quartz, feldspars, and fragments of sedimentary rocks. The detrital modes of these sandstones indicate that they were derived from recycled orogen and stable cratonic source. Major and trace element contents of them are generally depleted (except SiO2) relative to upper continental crust which is mainly due to the presence of quartz and absence of Al-bearing minerals. Modal composition (e.g., quartz, feldspar, and lithic fragments) and discrimination diagrams based on major elements, trace elements (Ti, La, Th, Sc, and Zr), and also such ratios as La/Sc, Th/Sc, La/Co, and Th/Co, in sandstones suggest a felsic igneous source rock and quartzose polycyclic sedimentary provenance in a passive continental margin setting. Furthermore, high Zr/Sc values in these sandstones are considered as a sign of recycling. We indicated paleo-weathering conditions by modal compositions, the CIA index and Al2O3?+?K2O?+?Na2O% vs. SiO2% bivariate for these sandstones. Based on these results, although recycling is important to increase the maturity of the Niur sandstones, humid climate conditions in the source area have played a decisive role.  相似文献   

18.
The Upper Miocene shales of the Samh Formation, North Marsa Alam along the Egyptian Red Sea coastal plain were analyzed for major and selected trace elements to infer their provenance, weathering intensity, and tectonic setting. The Samh Formation consists of sandstone underlies by shale and marl intercalations. The Samh shales are texturally classified as mudstones. Mineralogically, these shales consist mainly of smectite and kaolinite, associated with non clay minerals (abundant quartz and trace of plagioclase, microcline, and halite). Compared to post-Archaean Australian shales (PAAS), the Samh shales are highly enriched in SiO2, Al2O3, and Fe2O3 and depleted in TiO2, P2O5, Na2O, MgO, and K2O contents. The K2O/Al2O3 ratio values indicate predominance of clay minerals over K-bearing minerals. Trace elements like zirconium (Zr), Cr, Pb, Sc, Rb, and Cs are positively correlated with Al2O3 indicating that these elements are likely fixed in K-feldspars and clays. The Chemical Index of Alteration (CIA), Plagioclase Index of Alteration (PIA), and Chemical Index of Weathering (CIW) values indicate moderate to intense weathering of the source material in a semiarid climate. The geochemistry results suggest that the Samh shales were deposited in a passive margin of a synrift basin and derived from felsic (granitic) source rocks. The inferred tectonic setting for the Upper Miocene Samh shales in Marsa Alam is in agreement with the tectonic evolutionary history of the Eastern Desert of Egypt during the Upper Miocene.  相似文献   

19.
The sediment geochemistry, including REE, of surface and core samples from Mansar Lake, along with mineralogical investigations, have been carried out in order to understand the provenance, source area weathering, hydrolic sorting and tectonic setting of the basin. The geochemical signatures preserved in these sediments have been exploited as proxies in order to delineate these different parameters.The major element log values (Fe2O3/K2O) vs (SiO2/Al2O3) and (Na2O/K2O) vs (SiO2/Al2O3) demarcate a lithology remarkably similar to that exposed in the catchment area. The chondrite normalized REE patterns of lake samples are similar to Post Archaean Australian Shale (PAAS) with LREE enrichment, a negative Eu anomaly and almost flat HREE pattern similar to a felsic and/or cratonic sedimentary source. However, the La–Th–Sc plot of samples fall in a mixed sedimentary domain, close to Upper Continental Crust (UCC) and PAAS, suggesting sedimentary source rocks for the Mansar detritus. It also indicates that these elements remained immobile during weathering and transportation. The mineralogical characteristic, REEs, and high field strength elements (HFSE), together with the high percentage of metamorphic rock fragments in the Siwalik sandstone, support a metamorphic source for lower Siwalik sediments. A very weak positive correlation between Zr and SiO2, poor negative correlation with Al2O3, negative correlation of (La/Yb)N and (Gd/Yb)N ratios with SiO2 and positive correlation with Al2O3, suggest that Zr does not dominantly control the REE distribution in Mansar sediments. The petrographic character and textural immaturity indicate a short distance transport for the detritus. The distribution of elements in core samples reflect fractionation. The higher Zr/Th and Zr/Yb ratios in coarse sediments and PAAS compared to finer grained detritus indicate sedimentary sorting. Plots of the geochemical data on tectonic discrimination diagrams suggest that the sediments derived from the lower Siwalik were originated within a cratonic interior and later deposited along a passive margin basinal setting. It therefore reveals lower Siwalik depositional history.  相似文献   

20.
Geochemical characteristics of the Middle Permian mudstones from the Longge Formation in the Jiaomuri area, central uplift zone of Qiangtang Basin have been analysed to constrain their provenance, tectonic setting, depositional redox condition and palaeoclimate. Based on the geochemical parameters like CIA, PIA, ICV values and Th/U, K/Rb ratios indicate that the source rocks were affected by low degree weathering conditions. The U/Th, V/Cr, Ni/Co, V/Sc ratios and Uau, C‐values of samples suggest that the mudstones were formed in an oxic environment, with arid palaeoclimate. Bulk‐rock geochemistry analysis indicates that they are mainly arkose and subarkose, derived from dominantly andesitic rocks, probably a mixing of felsic and mafic provenance. The CIA, PIA and ICV values of these samples suggest that the Longge mudstones are compositionally immature and related to moderate weathering. The tectonic discrimination diagrams, as well as critical trace and REE characteristic parameters imply an oceanic arc or continental arc setting for the depositional basin of mudstones from the Longge Formation, probably back‐arc basin. This study supports an occurrence of archipelagic oceanic basins in the Jiaomuri area in the Middle Permian, which provides evidence for the research of the Longmu Co–Shuanghu–Lancangjiang Suture. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号