共查询到20条相似文献，搜索用时 62 毫秒
1.
The main objective of this work is to establish the applicability of shallow surface‐seismic traveltime tomography in basalt‐covered areas. A densely sampled ～1300‐m long surface seismic profile, acquired as part of the SeiFaBa project in 2003 ( Japsen et al. 2006 ) at Glyvursnes in the Faroe Islands, served as the basis to evaluate the performance of the tomographic method in basalt‐covered areas. The profile is centred at a ～700‐m deep well. VP, VS and density logs, a zero‐offset VSP, downhole‐geophone recordings and geological mapping in the area provided good means of control. The inversion was performed with facilities of the Wide Angle Reflection/Refraction Profiling program package ( Ditmar et al. 1999 ). We tested many inversion sequences while varying the inversion parameters. Modelled traveltimes were verified by full‐waveform modelling. Typically an inversion sequence consists in several iterations that proceed until a satisfactory solution is reached. However, in the present case with high velocity contrasts in the subsurface we obtained the best result with two iterations: first obtaining a smooth starting model with small traveltime residuals by inverting with a high smoothing constraint and then inverting with the lowest possible smoothing constraint to allow the inversion to have the full benefit of the traveltime residuals. The tomogram gives usable velocity information for the near‐surface geology in the area but fails to reproduce the expected velocity distribution of the layered basalt flows. Based on the analysis of the tomogram and geological mapping in the area, a model was defined that correctly models first arrivals from both surface seismic data and downhole‐geophone data. 相似文献
2.
地震波的运动学信息(走时、斜率等)通常用于宏观速度建模.针对走时反演方法,一个基本问题是走时拾取或反射时差的估计.对于成像域反演方法,可以通过成像道集的剩余深度差近似计算反射波时差.在数据域中,反射地震观测数据是有限频带信号,如果不能准确地确定子波的起跳时间,难以精确地确定反射波的到达时间.另一方面,如果缺乏关于模型的先验信息,则很难精确测量自地下同一个反射界面的观测数据同相轴和模拟数据同相轴之间的时差.针对走时定义及时差测量问题,首先从叠前地震数据的稀疏表达出发,利用特征波场分解方法,提取反射子波并估计局部平面波的入射和出射射线参数.进一步,为了实现自动和稳定的走时拾取,用震相的包络极值对应的时间定义反射波的到达时,实现了立体数据中间的自动生成.理论上讲,利用包络极值定义的走时大于真实的反射波走时,除非观测信号具有无限带宽(即delta脉冲).然而,走时反演的目的是估计中-大尺度的背景速度结构,因此走时误差导致的速度误差仍然在可以接受的误差范围内.利用局部化传播算子及特征波聚焦成像条件将特征波数据直接投影到地下虚拟反射点,提出了一种新的反射时差估计方法.既避免了周期跳跃现象以及串层等可能性,又消除了振幅因素对时差测量的影响.最后,在上述工作基础之上,提出了一种基于特征波场分解的新型全自动反射走时反演方法(CWRTI).通过对泛函梯度的线性化近似,并用全变差正则化方法提取梯度的低波数部分,实现了背景速度迭代反演.在理论上,无需长偏移距观测数据或低频信息、对初始模型依赖性低且计算效率高,可以为后续的全波形反演提供可靠的初始速度模型.理论和实际资料的测试结果证明了本文方法的有效性. 相似文献
3.
In areas of complex geology such as the Canadian Foothills, the effects of anisotropy are apparent in seismic data and estimation of anisotropic parameters for use in seismic imaging is not a trivial task. Here we explore the applicability of common‐focus point (CFP)‐based velocity analysis to estimate anisotropic parameters for the variably tilted shale thrust sheet in the Canadian Foothills model. To avoid the inherent velocity‐depth ambiguity, we assume that the elastic properties of thrust‐sheet with respect to transverse isotropy symmetry axis are homogeneous, the reflector below the thrust‐sheet is flat, and that the anisotropy is weak. In our CFP approach to velocity analysis, for a poorly imaged reflection point, a traveltime residual is obtained as the time difference between the focusing operator for an assumed subsurface velocity model and the corresponding CFP response obtained from the reflection data. We assume that this residual is due to unknown values for anisotropy, and we perform an iterative linear inversion to obtain new model parameters that minimize the residuals. Migration of the data using parameters obtained from our inversion results in a correctly positioned and better focused reflector below the thrust sheet. For traveltime computation we use a brute force mapping scheme that takes into account weakly tilted transverse isotropy media. For inversion, the problem is set up as a generalized Newton's equation where traveltime error (differential time shift) is linearly dependent on the parameter updates. The iterative updates of parameters are obtained by a least‐squares solution of Newton's equations. The significance of this work lies in its applicability to areas where transverse isotropy layers are heterogeneous laterally, and where transverse isotropy layers are overlain by complex structures that preclude a moveout curve fitting. 相似文献
4.
Geostatistical seismic inversion for non‐stationary patterns using direct sequential simulation and co‐simulation 
下载免费PDF全文
下载免费PDF全文 Hamid Sabeti Ali Moradzadeh Faramarz Doulati Ardejani Leonardo Azevedo Amilcar Soares Pedro Pereira Ruben Nunes 《Geophysical Prospecting》2017,65(Z1):25-48
Geostatistical seismic inversion methods are routinely used in reservoir characterisation studies because of their potential to infer the spatial distribution of the petro‐elastic properties of interest (e.g., density, elastic, and acoustic impedance) along with the associated spatial uncertainty. Within the geostatistical seismic inversion framework, the retrieved inverse elastic models are conditioned by a global probability distribution function and a global spatial continuity model as estimated from the available well‐log data for the entire inversion grid. However, the spatial distribution of the real subsurface elastic properties is complex, heterogeneous, and, in many cases, non‐stationary since they directly depend on the subsurface geology, i.e., the spatial distribution of the facies of interest. In these complex geological settings, the application of a single distribution function and a spatial continuity model is not enough to properly model the natural variability of the elastic properties of interest. In this study, we propose a three‐dimensional geostatistical inversion technique that is able to incorporate the reservoir's heterogeneities. This method uses a traditional geostatistical seismic inversion conditioned by local multi‐distribution functions and spatial continuity models under non‐stationary conditions. The procedure of the proposed methodology is based on a zonation criterion along the vertical direction of the reservoir grid. Each zone can be defined by conventional seismic interpretation, with the identification of the main seismic units and significant variations of seismic amplitudes. The proposed method was applied to a highly non‐stationary synthetic seismic dataset with different levels of noise. The results of this work clearly show the advantages of the proposed method against conventional geostatistical seismic inversion procedures. It is important to highlight the impact of this technique in terms of higher convergence between real and inverted reflection seismic data and the more realistic approximation towards the real subsurface geology comparing with traditional techniques. 相似文献
5.
初至波走时层析反演技术作为建立近地表速度模型的重要手段,是解决陆地资料复杂静校正问题的关键技术。而折射波广泛发育的海洋地震资料,对折射波信息的关注与运用并没有得到广泛的重视。本文首次将层析反演方法应用于海洋拖缆地震数据的近海底速度模型的建立。本文方法与陆地资料层析反演的主要区别在于:①在震源信号的最小相位化处理后进行初至时间的拾取,避免了混合相位子波初至拾取不准带来的误差;②以海水深度与海水速度作为反演约束条件,减小了迭代误差。实测二维资料的层析反演结果表明,本文方法可反演出较为精确的海洋地层速度结构。 相似文献
6.
Guido Baeten Jan Willem de Maag René‐Edouard Plessix Rini Klaassen Tahira Qureshi Maren Kleemeyer Fons ten Kroode Zhang Rujie 《Geophysical Prospecting》2013,61(4):701-711
Velocity model building and impedance inversion generally suffer from a lack of intermediate wavenumber content in seismic data. Intermediate wavenumbers may be retrieved directly from seismic data sets if enough low frequencies are recorded. Over the past years, improvements in acquisition have allowed us to obtain seismic data with a broader frequency spectrum. To illustrate the benefits of broadband acquisition, notably the recording of low frequencies, we discuss the inversion of land seismic data acquired in Inner Mongolia, China. This data set contains frequencies from 1.5–80 Hz. We show that the velocity estimate based on an acoustic full‐waveform inversion approach is superior to one obtained from reflection traveltime inversion because after full‐waveform inversion the background velocity conforms to geology. We also illustrate the added value of low frequencies in an impedance estimate. 相似文献
7.
Source side seismic tomography(3STomo):A novelmethod to image the subsurface structure beneath seismically active region 下载免费PDF全文
下载免费PDF全文 We propose a novel seismic tomography method,Source Side Seismic Tomography(3STomo),which is designed particularly to image the subsurface structure beneath seismically active regions.Unlike the teleseismic tomography,in which the data are relative traveltime residuals between closely spaced stations for each teleseismic event,3STomo uses relative traveltime shifts between earthquakes within the study region for each distant station.Given the relatively evener distribution of global seismic stations,this method has unique advantages for imaging the structure beneath regions that have numerous earthquakes but lack of dense seismic stations,for example,some subduction zones and spreading ridges in the ocean.In addition,3STomo has potentially better vertical resolution at shallow depths than the traditional teleseismic tomography.The effect of the inaccurate source parameters on its resolution can be minimized by using depth phases and the technique of joint source and structure inversion.Numerical experiments and application to Luzon Island,Philippines show that 3STomo can be a valuable tool to investigate the subsurface structure beneath some areas where the traditional method cannot be applied to,or at least it can be used as a complementary component of conventional teleseismic tomography to obtain better back-azimuth coverage and achieve higher resolution at shallow depths in the inversion. 相似文献
8.
We estimate velocity anisotropy factors from seismic traveltime tomographic data and apply a correction for anisotropy in the inversion procedure to test possible improvements on the traveltime fit and the quality of the resulting tomographic images. We applied the anisotropy correction on a traveltime data set obtained from the investigation of the foundation structure of a monumental building: a Byzantine church from the 11th century AD, in Athens, Greece. Vertical transverse isotropy is represented by one axis of symmetry and one anisotropy magnitude for the entire tomographic inversion grid. We choose the vertical direction for the symmetry axis by analysing the available data set and taking into account information on the character of the foundations of the church from the literature and past excavations. The anisotropy magnitude is determined by testing a series of values of anisotropy and examining their effect on the tomographic inversion results. The best traveltime fit and image quality are obtained with an anisotropy value (Vmax/Vmin) of 1.6, restricted to the high velocity structures in the subsurface. We believe that this anisotropy value, which is significantly higher than the usual values reported for near‐surface geological material, is related to the fabric of the church foundations, due to the shape of the individual stone blocks and the layout of the stonework. Inversion results obtained with the correction for anisotropy indicate that both the traveltime fit and the image quality are improved, providing an enhanced reconstruction of the velocity field, especially for the high‐velocity features. Based on this enhanced and more reliable reconstruction of velocity distribution, an improved image of the subsurface material character was made possible. In particular, the pattern and state of the church foundations and possible weak ground material areas were revealed more clearly. This improved subsurface knowledge may assist in a better design of restoration measures for monumental buildings such as Byzantine churches. 相似文献
9.
3-D simultaneous inversion for velocity and reflector geometry using multiple classes of arrivals in a spherical coordinate frame 总被引：1，自引：0，他引：1
Guo-jiao Huang Chao-ying Bai Xing-wang Li Stewart Greenhalgh 《Journal of Seismology》2014,18(1):123-135
The two key requirements in conducting 3-D simultaneous traveltime tomography on real data at the regional and global scale with multiple classes of arrival time information are (1) it needs an efficient and accurate arrival tracking algorithm for multiply transmitted, reflected (or refracted) and converted waves in a 3-D variable velocity model with embedded velocity discontinuities (or subsurface interfaces), and (2) a subdimensional inversion solver is required which can easily search for different types of model parameters to balance the trade-off between the different types of model parameter updated in the simultaneous inversion process. For these purposes, we first extend a popular grid/cell-based wavefront expanding ray tracing algorithm (the multistage irregular shortest-path ray tracing method), which previously worked only in Cartesian coordinate at the local scale, to spherical coordinates appropriate to the regional or global scale. We then incorporated a fashionable inversion solver (the subspace method) to formulate a simultaneous inversion algorithm, in which the multiple classes of arrivals (including direct and reflected arrivals from different velocity discontinuities) can be used to simultaneously update both the velocity fields and the reflector geometries. Numerical tests indicate that the new inversion method is both applicable and flexible in terms of computational efficiency and solution accuracy, and is not sensitive to a modest level of noise in the traveltime data. It offers several potential benefits over existing schemes for real data seismic imaging. 相似文献
10.
地震走时层析成像方法是解决复杂近地表模型速度建模问题的重要技术.该方法是一种迭代反演方法,在反演过程中需要反复计算地震射线走时.故而,高效高精度且能适应复杂模型的走时计算方法是地震走时层析成像实用化的关键技术之一.本文引入医学成像领域研究的MSFM(Multi-stencils Fast Marching Methods)用于地震层析反演中的走时计算.该方法在标准FMM(Fast Marching Methods)基础上利用坐标旋转生成新的FMM计算模板,使计算网格点对角方向邻点参与计算,改善了标准FMM存在对角方向误差大的缺陷.本文分析对比了MSFM和标准FMM的计算精度和计算效率;针对地震层析成像技术解决的起伏地表模型建模问题,研究了起伏地表模型地震走时计算的MSFM实现方法;采用炮点邻近区域局部细分网格技术只需增加很少的计算量即可大幅提高计算精度.理论分析和模型试算表明MSFM算法明显改善了FMM的计算精度,同时保持了FMM算法的高效性.文章通过对崎岖地表模型的正演和层析反演试算,验证了基于MSFM的地震走时计算方法对复杂模型有很强的适应能力.研究表明该方法作为地震走时层析反演中高效高精度的正演算法,有很好的应用价值. 相似文献
11.
Derecke Palmer 《Geophysical Prospecting》2010,58(2):203-218
Non‐uniqueness occurs with the 1D parametrization of refraction traveltime graphs in the vertical dimension and with the 2D lateral resolution of individual layers in the horizontal dimension. The most common source of non‐uniqueness is the inversion algorithm used to generate the starting model. This study applies 1D, 1.5D and 2D inversion algorithms to traveltime data for a syncline (2D) model, in order to generate starting models for wave path eikonal traveltime tomography. The 1D tau‐p algorithm produced a tomogram with an anticline rather than a syncline and an artefact with a high seismic velocity. The 2D generalized reciprocal method generated tomograms that accurately reproduced the syncline, together with narrow regions at the thalweg with seismic velocities that are less than and greater than the true seismic velocities as well as the true values. It is concluded that 2D inversion algorithms, which explicitly identify forward and reverse traveltime data, are required to generate useful starting models in the near‐surface where irregular refractors are common. The most likely tomogram can be selected as either the simplest model or with a priori information, such as head wave amplitudes. The determination of vertical velocity functions within individual layers is also subject to non‐uniqueness. Depths computed with vertical velocity gradients, which are the default with many tomography programs, are generally 50% greater than those computed with constant velocities for the same traveltime data. The average vertical velocity provides a more accurate measure of depth estimates, where it can be derived. Non‐uniqueness is a fundamental reality with the inversion of all near‐surface seismic refraction data. Unless specific measures are taken to explicitly address non‐uniqueness, then the production of a single refraction tomogram, which fits the traveltime data to sufficient accuracy, does not necessarily demonstrate that the result is either ‘correct’ or the most probable. 相似文献
12.
A transmission + reflection wave-equation traveltime and waveform inversion method is presented that inverts the seismic data for the anisotropic parameters in a vertical transverse isotropic medium. The simultaneous inversion of anisotropic parameters and ε is initially performed using transmission wave-equation traveltime inversion method. Transmission wave-equation traveltime only provides the low-intermediate wavenumbers for the shallow part of the anisotropic model; in contrast, reflection wave-equation traveltime estimates the anisotropic parameters in the deeper section of the model. By incorporating a layer-stripping method with reflection wave-equation traveltime, the ambiguity between the background-velocity model and the depths of reflectors can be greatly mitigated. In the final step, multi-scale full-waveform inversion is performed to recover the high-wavenumber component of the model. We use a synthetic model to illustrate the local minima problem of full-waveform inversion and how transmission and reflection wave-equation traveltime can mitigate this problem. We demonstrate the efficacy of our new method using field data from the Gulf of Mexico. 相似文献
13.
通过地震海洋学联合调查航次,获得了同时采集的高分辨率多道地震数据与水文数据（XBT）联合调查数据.通过针对性处理获得了清晰的海洋水体反射地震剖面,捕捉到南海东北部次表层涡旋,证明了该调查方法的有效性.利用背景场约束反演方法得到海水的波阻抗、声速、密度、温度和盐度剖面,揭示了涡旋具有相对低速、高密、低温与高盐特征.处理和反演结果表明,在浅部和部分噪声较强和无约束反演区域,结果误差较大,可靠性较低.调查结果说明,获得较高信噪比的原始高分辨率地震资料采集技术方法、联合约束数据的获取、针对性的特殊处理方法和有效的反演方法是地震海洋学资料有效分析利用的重要保证. 相似文献
14.
15.
We describe an integrated method for solving the complex near‐surface problem in land seismic imaging. This solution is based on an imaging approach and is obtained without deriving a complex near‐surface velocity model. We start by obtaining from the data the kinematics of the one‐way focusing operators (i.e. time‐reversed Green's functions) that describe propagation between the acquisition surface and a chosen datum reflector using the common‐focus‐point technology. The conventional statics solutions obtained from prior information about the near surface are integrated in the initial estimates of the focusing operators. The focusing operators are updated iteratively until the imaging principle of equal traveltime is fulfilled for each subsurface gridpoint of the datum reflector. Therefore, the seismic data is left intact without any application of time shifts, which makes this method an uncommitted statics solution. The focusing operators can be used directly for wave‐equation redatuming to the respective reflector or for prestack imaging if determined for multiple reflecting boundaries. The underlying velocity model is determined by tomographic inversion of the focusing operators while also integrating any hard prior information (e.g. well information). This velocity model can be used to perform prestack depth imaging or to calculate the depth of the new datum level. We demonstrate this approach on 2D seismic data acquired in Saudi Arabia in an area characterized by rugged topography and complex near‐surface geology. 相似文献
16.
17.
Exploring seismic inversion methodologies for non‐stationary geological environments: a benchmark study between deterministic and geostatistical seismic inversion 下载免费PDF全文
下载免费PDF全文 This paper presents a comparison between subsurface impedance models derived from different deterministic and geostatistical seismic inversion methodologies applied to a challenging synthetic dataset. Geostatistical seismic inversion methodologies nowadays are common place in both industry and academia, contrasting with traditional deterministic seismic inversion methodologies that are becoming less used as part of the geo‐modelling workflow. While the first set of techniques allows the simultaneous inference of the best‐fit inverse model along with the spatial uncertainty of the subsurface elastic property of interest, the second family of inverse methodology has proven results in correctly predicting the subsurface elastic properties of interest with comparatively less computational cost. We present herein the results of a benchmark study performed over a realistic three‐dimensional non‐stationary synthetic dataset in order to assess the performance and convergence of different deterministic and geostatistical seismic inverse methodologies. We also compare and discuss the impact of the inversion parameterisation over the exploration of the model parameter space. The results show that the chosen seismic inversion methodology should always be dependent on the type and quantity of the available data, both seismic and well‐log, and the complexity of the geological environment versus the assumptions behind each inversion technique. The assessment of the model parameter space shows that the initial guess of traditional deterministic seismic inversion methodologies is of high importance since it will determine the location of the best‐fit inverse solution. 相似文献
18.
三维地质模型中地震波共轭梯度非线性走时反演 总被引：2，自引：0，他引：2
地震体波走时层析成像是探测地球内部速度结构的重要方法之一。基于三维块状建模以及三角形拼接的界面描述方式,结合快速高效的逐段迭代射线追踪方法,获得三维复杂地质模型中的地震射线路径与走时信息,采用共轭梯度非线性反演算法,进行地震波走时反演。实验结果表明共轭梯度反演算法在三维层状模型中具有较高的有效性。 相似文献
19.
Field static corrections in general need be applied to all onshore seismic reflection data to eliminate the disturbing effects a weathering layer or near-surface low velocity zone has on the continuity of deep seismic reflections. The traveltimes of waves refracted at the bottom of the low velocity zone (or intermediate refracting interfaces) can often be observed as first breaks on shot records and used to develop a laterally inhomogeneous velocity model for this layer, from which the field static corrections can then be obtained. A simple method is described for computing accurate field statics from first breaks. It is based on a linearization principal for traveltimes and leads to the algorithms that are widely and successfully applied within the framework of seismic tomography. We refine an initial model for the low velocity layer (estimated by a standard traveltime inversion technique) by minimizing the errors between the observed first arrivals on field records and those computed by ray theory through an initial model of the low velocity layer. Thus, one can include more lateral velocity variations within the low velocity layers, which are important to obtain good field static corrections. Traditional first break traveltime inversion methods cannot, in general, provide such refined velocity values. The technique is successfully applied to seismic data from the Amazon Basin. It is based on a simple model for the low velocity layer that consists of an undulating earth surface and one planar horizontal refractor overlain by a laterally changing velocity field. 相似文献
20.
A new algorithm for tomographic inversion of traveltimes of reflected and refracted seismic waves is developed. The inversion gives interface configurations and velocity distributions in layers. The important features of the algorithm are: (a) the inclusion of shot time delays in the list of unknown parameters; (b) the regularization is applied in such a way that the most probable model is characterized by the similarity of neighbouring interfaces. As the problem under consideration is non-linear, several iterations are necessary in order to obtain the final model. In the case of a very inexact initial model, a 'layer-by-layer' inversion strategy is recommended as a first inversion step. The inversion program is supplied with a user interface, thanks to which one can: (a) pick interactively and identify seismic traveltimes; (b) build and edit depth/velocity models; and (c) display calculated traveltime curves and compare them with picked traveltimes as well as with the original seismic sections. The efficiency of the inversion software developed is illustrated by a numerical example and a field example in which shallow seismic data are considered. Application to wide-aperture reflection/refraction profiling (WARRP) data is also possible. 相似文献