首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
The carbonate platforms of the Wetterstein Formation of the Eastern Alps (Drau Range and Northern Calcareous Alps) show a distinct facies zonation of reefs and lagoons. While some lagoonal areas were episodically emerged and formed lagoonal islands, others remained permanently flooded. The scale of near surface, meteoric or marine diagenesis was related to this lagoonal topography. At shallow burial depth, cementation was dominated by altered marine solutions, which additionally caused recrystallization of metastable constituents of the sediment and earlier marine cements (high magnesian calcite, aragonite) connected with a carbon and oxygen isotopic change to more negative values. Deeper burial cementation shows a succession with two types of saddle dolomite and three types of blocky calcite. Carbon and oxygen isotopic values of these cements show a trend towards more negative values from the first to the last generation, in the following succession: clear saddle dolomite—zoned blocky calcite—cloudy saddle dolomite—post-corrosion blocky calcite—replacive blocky calcite. Fluid inclusion studies of the carbonate cements are interpreted to indicate a deeper burial temperature development that first increases from 175 to 317°C, followed by a temperature decrease to 163–260°C, and subsequent increase up to 316°C, whereby the samples of the Drau Range always show the lowest values. Calculations of the isotopic composition of the water, from which the carbonate cements were precipitated, yielded positive δ18O values from 6.66 to 17.81%o (SMOW), which are characteristic for formation and/or metamorphic waters. Also, the isotopic compositions of the palaeofluids probably changed during deeper burial diagenesis, following the temperature development.  相似文献   

2.
川西南中二叠统中粗晶白云石流体来源分析   总被引：2，自引：1，他引：1  
四川盆地西南地区中二叠统地层在埋藏过程中发生了较高程度的白云岩化。通过野外剖面观察和详细的薄片岩石学研究,在中二叠统白云岩储层中识别出了四种类型的白云石（包括三种基质交代白云石和一种白云石胶结物）:1）粉晶白云石,宏观上主要呈层状发育,晶粒小于50 μm,平直镜面半自形晶-非平直晶面它形晶;2）细晶白云石,晶粒大小为50~250 μm,平直晶面半自形晶-自形晶;3）中粗晶白云石,宏观上可见溶蚀孔洞和裂缝发育,其中充填白色的白云石胶结物、方解石胶结物等,晶粒大小为250 μm~2 mm,非平直晶面它形晶;4）白云石胶结物,以胶结物的形式在裂缝和溶蚀孔洞中发育,晶粒大小变化较大,具有明显的波状消光。利用不同矿物之间的接触和切割关系,结合阴极发光和扫描电镜等手段,确定了几种白云石和相关成岩矿物的形成时序,确立四川盆地西南地区中二叠统白云岩的成岩演化序列。即从成岩早期到晚期,依次形成（或发生成岩作用）了粉晶白云石、早期溶蚀作用、细晶白云石、中粗晶白云石、水力压裂缝、白云石胶结物、石英、方解石脉、缝合线、晚期溶蚀和沥青充填。通过地球化学和包裹体分析,发现中粗晶白云石和白云石胶结物具有相似的地球化学特征,即明显偏负的氧同位素、大于同期海水的Sr同位素,成岩流体具有较高的温度和盐度,表明其成岩流体具有典型的热液性质。原始灰岩和早期白云岩经热液改造,重结晶为中粗晶白云石,并在裂缝和溶蚀孔洞中沉淀鞍形白云石胶结物。  相似文献   

3.
金湖凹陷戴南组储层总体为一套中低孔-中低渗碎屑储层,次生孔隙是本区最有效、最重要的孔隙类型,而搞清次生孔隙的分布规律及其成因成为下一步有利储层预测的关键。文中综合利用岩心、普通薄片、铸体薄片、扫描电镜及物性参数等资料,对戴南组储层的岩石类型、物性特征、孔隙类型及次生孔隙分布规律进行了综合分析,并从溶蚀作用的发育条件入手探讨了次生孔隙的成因,以期为下一步有利储层预测和勘探开发提供科学依据。研究认为,金湖凹陷戴南组碎屑岩储层主要发育于三角洲、扇三角洲和滨浅湖,受沉积相带控制,储层类型复杂,以不等粒砂岩、含砾不等粒砂岩、细砂岩及粉砂岩为主,不同地区岩性存在差异。根据岩性三角图,砂岩类型以长石岩屑质石英砂岩为主。砂岩成分成熟度中等偏低,结构成熟度中等。戴南组砂岩孔隙度峰值分布在12.0%~14.0%,渗透率峰值分布在1~10 mD。不同沉积环境和地区储层物性也存在一定差异。三角洲前缘亚相的储层物性最好,平均孔隙度约19.4%,平均渗透率约134.2 mD,岩性以细砂岩为主,主要分布于研究区西部和中部。扇三角洲物性次之,平均孔隙度约12.5%,平均渗透率约6.2 mD,岩性以含砾不等粒砂岩为主,位于桐城断裂带东南部便1井附近。滨浅湖亚相的储层物性最差,岩性以粉砂岩为主,平均孔隙度约8.3%,平均渗透率约2.3 mD。戴南组储层孔隙分为原生孔隙和次生孔隙两大类,以次生粒间溶蚀孔隙为主。溶蚀孔隙包括粒间溶孔、粒内溶孔和铸模孔。粒间溶孔多由粒间碳酸盐胶结物如方解石、白云石、铁方解石等溶蚀后形成,粒内溶孔主要是长石及碳酸盐岩屑被选择性溶解而形成,可见白云石晶粒溶解留下的铸模孔。戴南组储层中的原生孔隙相对较少,主要以石英次生加大后的残余粒间孔的形式存在,发育于埋藏较浅的井如新庄1井、关1-1井。戴南组储层孔隙经历了由原生到次生的演化过程。总体上,在浅于约1 100 m,储层主要处于早成岩A阶段,以原生孔隙为主。在1 100~1 500 m,储层处于早成岩B阶段,形成混合孔隙段。超过1 500 m,储层进入中成岩A阶段,原生孔隙消失殆尽,基本上以次生孔隙为主。戴南组储层存在3个次生孔隙发育带:第一次生孔隙发育带在1 200~1 600 m,分布于埋藏相对较浅-中等的井区;第二次生孔隙发育带分布在1 800~2 800 m;第三次生孔隙发育带在2 900~3 000 m左右。第一、二次生孔隙发育带次生孔隙的绝对值较大,说明溶蚀作用较强。戴南组储层次生孔隙发育与方解石、白云石胶结物的溶蚀及长石碎屑和碳酸盐岩岩屑的溶蚀有关。烃源岩成熟排烃是次生孔隙发育的主控因素;碳酸盐胶结物发育提供了次生孔隙发育的物质基础;长石的溶蚀对次生孔隙发育有一定的贡献;次生孔隙的形成与黏土矿物的相互转化有一定的关系;断裂活动进一步促使了次生孔隙的发育。  相似文献   

4.
二连盆地多个凹陷的下白垩统均发育一套湖相白云岩。它不仅是一个重要的地层对比标志层,还是一套有效的储集层。这套储层孔隙结构复杂,非均质性强。寻找优质储层是油气勘探的关键。研究以二连额仁淖尔凹陷的下白垩统湖相云质岩为研究对象,研究了云质岩储层的储层特征和成因。本次研究采用岩心观察、岩石学、扫描电镜(SEM)、X射线衍射、稳定碳氧同位素地球化学等多种方法,进而了解储层的岩石学、成岩特征及其对储层物性的影响。为了深入分析云质岩的储层特征,将云质岩分为三种类型:云质粉砂岩、云质沉凝灰岩和云质泥岩。云质粉砂岩常与云质/钙质泥岩相邻。白云石的主要特征是微晶结构、填充粒间孔隙或取代基质或方解石胶结物。云质粉砂岩物性较好,平均孔隙度为10.2%,渗透率为1.03 mD,属于低-超低孔特低渗储层。除了白云石化外,方解石胶结作用是降低储层孔隙度和渗透率的主要因素。有机酸的溶蚀作用主要发生在凝灰质矿物中,常见于与云质沉凝灰岩相邻的云质粉砂岩,形成粒内和粒间溶孔。云质沉凝灰岩常与泥岩、粉砂岩互层,主要发育前扇三角洲亚相。白云石以微晶为主,方解石以细晶粗晶为主。它们以团块的形式分布在凝灰质基质中。云质沉凝灰岩的平均孔隙度和渗透率分别为9.85%和0.34 mD,属于特低孔特低渗储层。储层孔隙度和渗透率降低的主要因素与火山物质有关。火山物质的蚀变作用释放出大量的离子进入地层水,不仅加强了早期碳酸盐胶结作用,而且导致了黏土矿物充填孔隙。另外,溶蚀作用是改善储层物性的主要因素,主要溶蚀云质沉凝灰岩中的碳酸盐团块,形成粒内和粒间溶孔。白云石化作用在云质泥岩中较弱,白云石沿纹层以泥晶形式出现。云质泥岩物性差,平均孔隙度为2.5%,渗透率为0.01 mD,储层物性差主要是原始物性差造成的。此外,成岩晚期的强碳酸盐胶结作用导致云质泥岩形成致密储层。该类岩石主要依靠微裂缝来改善储层物性,在断裂带附近的云质泥岩易发育微裂缝,微裂缝富集程度随离主断层距离的增大而减小。  相似文献   

5.
Pervasive dolomites occur preferentially in the stromatoporoid biostromal (or reefal) facies in the basal Devonian (Givetian) carbonate rocks in the Guilin area, South China. The amount of dolomites, however, decreases sharply in the overlying Frasnian carbonate rocks. Dolostones are dominated by replacement dolomites with minor dolomite cements. Replacement dolomites include: (1) fine to medium, planar‐e floating dolomite rhombs (Rd1); (2) medium to coarse, planar‐s patchy/mosaic dolomites (Rd2); and (3) medium to very coarse non‐planar anhedral mosaic dolomites (Rd3). They post‐date early submarine cements and overlap with stylolites. Two types of dolomite cements were identified: planar coarse euhedral dolomite cements (Cd1) and non‐planar (saddle) dolomite cements (Cd2); they post‐date replacement dolomites and predate late‐stage calcite cements that line mouldic vugs and fractures. The replacement dolomites have δ18O values from ?13·7 to ?9·7‰ VPDB, δ13C values from ?2·7 to + 1·5‰ VPDB and 87Sr/86Sr ratios from 0·7082 to 0·7114. Fluid inclusion data of Rd3 dolomites yield homogenization temperatures (Th) of 136–149 °C and salinities of 7·2–11·2 wt% NaCl equivalent. These data suggest that the replacive dolomitization could have occurred from slightly modified sea water and/or saline basinal fluids at relatively high temperatures, probably related to hydrothermal activities during the latest Givetian–middle Fammenian and Early Carboniferous times. Compared with replacement dolomites, Cd2 cements yield lower δ18O values (?14·2 to ?9·3‰ VPDB), lower δ13C values (?3·0 to ?0·7‰ VPDB), higher 87Sr/86Sr ratios (≈ 0·7100) and higher Th values (171–209 °C), which correspond to trapping temperatures (Tr) between 260 and 300 °C after pressure corrections. These data suggest that the dolomite cements precipitated from higher temperature hydrothermal fluids, derived from underlying siliciclastic deposits, and were associated with more intense hydrothermal events during Permian–Early Triassic time, when the host dolostones were deeply buried. The petrographic similarities between some replacement dolomites and Cd2 dolomite cements and the partial overlap in 87Sr/86Sr and δ18O values suggest neomorphism of early formed replacement dolomites that were exposed to later dolomitizing fluids. However, the dolomitization was finally stopped through invasion of meteoric water as a result of basin uplift induced by the Indosinian Orogeny from the early Middle Triassic, as indicated by the decrease in salinities in the dolomite cements in veins (5·1–0·4 wt% NaCl equivalent). Calcite cements generally yield the lowest δ18O values (?18·5 to ?14·3‰ VPDB), variable δ13C values (?11·3 to ?1·2‰ VPDB) and high Th values (145–170 °C) and low salinities (0–0·2 wt% NaCl equivalent), indicating an origin of high‐temperature, dilute fluids recharged by meteoric water in the course of basin uplift during the Indosinian Orogeny. Faults were probably important conduits that channelled dolomitizing fluids from the deeply buried siliciclastic sediments into the basal carbonates, leading to intense dolomitization (i.e. Rd3, Cd1 and Cd2).  相似文献   

6.
羌塘盆地中侏罗统布曲组白云岩为非均质性强的低孔、低渗储层,孔喉结构评价难度较大。选取南羌塘坳陷布曲组20件白云岩岩心样品,通过铸体薄片、扫描电镜观察,结合物性分析和常规压汞实验,研究其孔喉分布和分形特征,探索分形维数与白云岩储层物性参数、孔喉结构参数、孔隙成因之间的关系。结果表明：（1）研究区布曲组白云岩储集空间类型包括组构选择性孔隙、非组构选择性孔隙、裂缝3类,依据毛管压力曲线特征将其孔喉结构分为5种类型,其分形曲线具有明显的转折点,转折点为孔喉分布峰值,代表连通性好的大尺度孔喉向连通性差的小尺度孔喉的转变;（2）小尺度孔喉的层内非均质性较弱、层间非均质性强,大尺度孔喉的分形维数比小尺度孔喉小,但分布区间较宽,样品间差异明显,表明大尺度孔喉复杂多样,层间（整体）非均质性比小尺度强;（3）大尺度孔喉的分形维数与储层参数、孔喉结构参数相关性较好,可用于布曲组白云岩储层的孔喉结构定量表征,大尺度孔喉分形维数越小,储层物性越好,大尺度孔喉占比越多对储层整体渗透能力的贡献越大;（4）该套储层的储集空间与孔喉结构以沉积形成的碳酸盐沉积物孔隙为基础,白云石化作用和溶蚀作用共同控制了孔喉结构的差异性。  相似文献   

7.
渤海湾盆地是我国重要的含油气盆地,其中古近系沙河街组发育储集性较好的砾岩储层。通过对储层岩石薄片显微鉴定、物性分析、扫描电镜分析、阴极发光分析等,明确了沙河街组有利的砾岩储层的岩石学、储集性和成岩作用特征。砾岩类型多样,其中云质砾岩的储集性最好。砾岩储层物性较好,平均孔隙度为16.1%,平均渗透率为217.93m D。主要孔隙类型为原生孔,原生孔类型主要为砾石间残余原生孔和生物碎屑体腔孔,其次是溶蚀孔。砾岩储层成岩作用类型与砾岩填隙物成分关系密切,以砂岩为主要填隙物的成岩作用中有显著的长石溶蚀作用,以碳酸盐岩为主要填隙物的则具有多期白云石和方解石等胶结物,最有利的成岩作用是早期白云石衬垫和长石的溶蚀作用。  相似文献   

8.
In the northeast of Zakho City, Northern Iraq, the host rocks of Pb–Zn deposits are composed predominantly of dolomites with subordinate dolomitic limestone intervals. This study is focused on the dolomites of the Bekhme Formation (Upper Campanian) carbonate-hosted Pb–Zn deposits. The amount of dolomites, however, increases toward the mineralized zone. Dolomites are dominated by replacement dolomite with minor dolomite cements. Petrography study allowed identification of six different dolomite textures. These are (1) fine crystalline, planar-s (subhedral) dolomite, RD1; (2) medium to coarse crystalline, planar-e (euhedral) to planar-s (subhedral) dolomites, RD2; (3) medium crystalline, planar-s (subhedral) to nonplanar-a (anhedral) dolomites, RD3; (4) coarse crystalline, planar-s (subhedral) to nonplanar-a (anhedral) dolomites, RD4; (5) planar (subhedral) void-filling dolomite cements, CD1; and (6) nonplanar (saddle) void-filling dolomite, CD2. The RD1, RD2, RD3, and RD4 dolomite textures are replacive in origin and are volumetrically the most important types, whereas CD1 and CD2 dolomites with sparry calcite are commonly cements that fill the open spaces. Although the dolomites of the Bekhme Formation are not macroscopically observed in the field, their different types are easily distinguished by petrographic examination and scanning electron microscopy. It was observed that the dolomites of the Bekhme Formation are formed in two different diagenetic stages: the early diagenetic from mixing zone fluids at the tidal–subtidal (reef) environments and the late diagenetic from basinal brines which partially mixed with hydrothermal fluids at the shallow-deep burial depths. The latter occurs often with sphalerite, galena, and pyrite within mineralized zone. These dolomite types are associated base-metal mineralization (Mississippi Valley type).  相似文献   

9.
贵州紫云县猴场镇扁平村的上石炭统叶状藻礁及其周边灰岩中广泛发育大量的各类胶结物。通过对胶结物的形态、结构和阴极发光特征以及胶结物间的接触关系的研究,可以确定成岩作用的先后并识别成岩环境。浅海海底同生成岩阶段大的孔隙中形成等厚环边针状胶结物、葡萄状胶结物,小的孔隙里形成微晶胶结物。早成岩阶段形成微亮晶和斑块状亮晶方解石胶结物和放射纤维扇状胶结物,表生成岩阶段的溶蚀作用和胶结作用强烈,胶结物类型有斑块状或等粒的方解石胶结物和等厚环壁柱状胶结物,等厚环壁柱状胶结物在所有胶结物中体积是较大的。早期胶结作用使叶状藻礁灰岩孔隙度大为降低。中、晚成岩阶段,孔隙被等厚环壁刃状胶结物和晶簇或斑块状亮晶方解石所充填,有些先成的胶结物被热液改造。后生作用阶段发生的主要是构造破裂作用,其中少数裂隙被红褐色含Fe2O3微晶层和晶体粉砂及渗流豆粒充填。叶状藻礁灰岩的孔隙在晚成岩阶段前或中被胶结而之后没有创造出大且连通的孔隙,是它没能成为油气储集层的原因之一。  相似文献   

10.
The Middle Jurassic Khatatba Formation acts as a hydrocarbon reservoir in the subsurface in the Western Desert, Egypt. This study, which is based on core samples from two exploration boreholes, describes the lithological and diagenetic characteristics of the Khatatba Formation sandstones. The sandstones are fine‐ to coarse‐grained, moderately to well‐sorted quartz arenites, deposited in fluvial channels and in a shallow‐marine setting. Diagenetic components include mechanical and chemical compaction, cementation (calcite, clay minerals, quartz overgrowths, and a minor amount of pyrite), and dissolution of calcite cements and feldspar grains. The widespread occurrence of an early calcite cement suggests that the Khatatba sandstones lost a significant amount of primary porosity at an early stage of its diagenetic history. In addition to calcite, several different cements including kaolinite and syntaxial quartz overgrowth occur as pore‐filling and pore‐lining cements. Kaolinite (largely vermicular) fills pore spaces and causes reduction in the permeability of the reservoir. Based on framework grain–cement relationships, precipitation of the early calcite cement was either accompanied by or followed the development of part of the pore‐lining and pore‐filling cements. Secondary porosity development occurred due to partial to complete dissolution of early calcite cements and feldspar. Late kaolinite clay cement occurs due to dissolved feldspar and has an impact on the reservoir quality of the Khatatba sandstones. Open hydraulic fractures also generated significant secondary porosity in sandstone reservoirs, where both fractures and dissolution took place in multiple phases during late diagenetic stages. The diagenesis and sedimentary facies help control the reservoir quality of the Khatatba sandstones. Fluvial channel sandstones have the highest porosities and permeabilities, in part because of calcite cementation, which inhibited authigenic clays or was later dissolved, creating intergranular secondary porosity. Fluvial crevasse‐splay and marine sandstones have the lowest reservoir quality because of an abundance of depositional kaolinite matrix and pervasive, shallow‐burial calcite and quartz overgrowth cements, respectively. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

11.
上扬子北缘震旦纪-早古生代沉积演化与储层分布特征   总被引：6，自引：2，他引：4  
上扬子北缘地层沉积演化既受北部南秦岭构造、西部龙门山构造、同时也受北部汉南古陆的长期继承性隆起影响。震旦纪-早古生代,其北部为秦岭洋、西部为巴颜喀拉洋,沉积充填演化序列有别于扬子地台东南边缘。在铁船山组-西乡组火山-沉积岩系和南华系冰碛岩之上,主要经历了震旦纪初始碳酸盐台地、早中寒武世陆棚、晚末寒武世-早奥陶世碳酸盐台地及克拉通边缘隆升、中晚奥陶世台地淹没、晚奥陶-早志留世滞留陆棚沉积等阶段。沉积演化过程中,上扬子北缘地区形成了多套区域性烃源岩,也形成了多套有利的储层,主要包括灯影组藻礁-白云岩储层、仙女洞组鲕粒灰岩储层、沧浪铺组砂体储层、石龙洞组白云岩储层。储层分布广泛,尽管总体以低孔低渗为主,但部分地区白云岩、灰岩储层溶蚀作用发育,储集性较好,灯影组与石龙洞组是主要的储层与潜在勘探目的层,具有较好的油气勘探潜力。  相似文献   

12.
张云峰  王清晨  李忠 《地质科学》2006,41(1):143-151
应用薄片、铸体和阴极发光等室内分析技术,对鲁西隆起奥陶系碳酸盐岩及济阳坳陷潜山奥陶系钻井岩心样品进行了成岩作用及储集特征详细研究。奥陶系碳酸盐岩原生孔隙消失殆尽,次生成因的孔、洞和缝是主要储集空间。其中裂缝储集层在各层段均有发育,但白云岩段优于其它岩性段;构造缝主要分布在构造轴部和断裂带附近,溶蚀缝在不整合面附近较为发育。孔洞型储集层主要发育在白云岩层段,以晶间孔、晶间溶孔和晶内溶孔为主要储集空间;有少量有效孔隙分布在灰岩段,以铸模孔、粒内溶孔和粒内孔为主。马家沟组八陡段顶部发育溶蚀角砾岩、纹层状结晶灰岩,砾间缝、晶间缝和溶洞为主要储集空间。白云岩段是奥陶系碳酸盐岩主要储集层段,构造因素、岩性和成岩作用(尤其是胶结作用和溶蚀作用)是造成奥陶系碳酸盐岩储集层剖面分布差异性的主要控制因素。  相似文献   

13.
Marine calcite cementation and lithification of Carboniferous carbonate sediments hosting Zn-Pb mineralisation in the Irish orefield occurred at or near the seafloor. A relatively early, fine-grained, grey replacive dolomite, preferentially developed in micrite, is widely developed in the Waulsortian Limestone Formation, the main host to mineralisation, and is pervasive in the southeastern Midlands in proximity to the Leinster Massif. This dolomite formed after the first four main stages of calcite cementation but probably also developed within tens of metres of the seafloor as evidenced by incorporation of clasts of dolomite in intraformational sedimentary breccias. Later, coarse-grained white dolomite preferentially replaced coarser components of the Waulsortian Limestone and infilled residual vuggy porosity. Whilst some of this coarse dolomite may be related to the fine replacive dolomite event, a common spatial association with fault zones, coupled with primary fluid inclusion data, suggest that a significant proportion of this phase precipitated during the onset of fault-controlled subsidence and widespread hydrothermal circulation within the Irish Midlands area. Fluids up to ~250 °C and 10–15 wt% NaCl equivalent, sourced from a Lower Palaeozoic basement-equilibrated fluid reservoir, infiltrated the carbonate sequence via faults and fractures. The more localised development of dolomite-cemented breccias (white matrix breccias) that are frequently associated spatially with mineralisation was a consequence of the increased focusing of these hydrothermal fluids. Ore formation was broadly synchronous with development of the white dolomite breccias but only happened where mixing occurred between the hydrothermal ore-fluids and localised, near-surface reservoirs of low-temperature, H2S-rich brine. In the Waulsortian, this process led to the precipitation of a distinctive black dolomite that forms a broad halo to massive sulphides. Although ore-stage sulphides postdate significant diagenesis of the host rocks, and often display "epigenetic" textures, the fact that much of the cementation occurred soon after carbonate deposition means that mineralisation does not have to have formed after significant burial. In fact, the occurrence of clasts of hydrothermal dolomite and sulphides in intraformational debris-flow breccias is only consistent with mineralising processes occurring in the near-seafloor environment, relatively soon after host-rock deposition. The regional development of a distinctive pink dolomite associated with faults and fractures was a post-ore event, and is considered to mark a regional brine migration linked to the onset of the Variscan orogeny. The development of this new tectonic and flow regime may have been responsible for the cessation of economic mineralisation in Ireland.Editorial handling: J. Menuge  相似文献   

14.
The Silurian Kepingtage Formation in Tazhong area is regarded as an acid-sensitive hydrocarbon reservoir. However, formation mechanism of acid-sensitive of the reservoir cannot be interpreted by the existing acid-sensitive evaluation criterion based on damage rate. The contents of acid-sensitive minerals illustrated by bulk-rock XRD, scanning electron microscopy and clay mineral composition analysis exert the dominant control on acid-sensitive flow testing of the reservoir. The iron-bearing minerals (including pyrite cements and chlorite cements) mainly deteriorate reservoir quality, while the iron-free minerals (including calcite cements and dolomite cements) mainly improve permeability. The permeability variation of the tested samples is controlled by the relative content of two acid-sensitive minerals. On the basis of newly established sensitivity mechanism and its influence on permeability, the corresponding ion (Fe2+) stabilizer was added to the acidizing fluids during the acidification reconstruction, which inhibited the negative factors of acid-sensitive minerals and improved the target layer quality effectively.  相似文献   

15.
The Cambrian Bonneterre Dolomite of south-eastern Missouri, USA, hosts the large Mississippi Valley type (MVT) lead-zinc-copper ore deposits of the region. The Bonneterre Dolomite consists of dolomitized algal bioherms, oolitic grainstone and associated lithologies that were deposited on a carbonate platform surrounding the Precambrian age St Francois Mountains. Porosity was determined by point counting thin sections from cores and mines in the Bonneterre Dolomite and by gas porosimetry. Volumes of epigenetic cements were estimated by point counting cement filling micro- and mesoporosity using cathodoluminescence. Cement volumes were added to present porosity to estimate porosities during various stages of mineralization. Prior to the onset of mineralization, micro- and mesoporosity in the Bonneterre Dolomite averaged approximately 19%. Precipitation of early dolomite cement (roughly concurrent with the main period of sulphide deposition) reduced average porosity to approximately 7% and closed off much of the intercrystalline pore space. Later cementation by dolomite (prior to late stage sulphides) reduced porosity to approximately 5%, and late cementation by quartz further reduced porosity to the present average value of <4%. Periods of carbonate dissolution during MVT mineralization enhanced large scale megaporosity associated with fractures and breccias but did not significantly increase smaller scale porosity. Dolomite cementation associated with MVT mineralization, porosity and permeability were facies controlled. Today, as a result of mineralization, large scale fractures and breccias control porosity and permeability. This study indicates that dolomite porosity may undergo significant change during basinal brine migrations associated with MVT mineralization.  相似文献   

16.
Kuh-I-Mond field in the Zagros foreland basin is a conventional heavy oil resource and is composed of fractured carbonates whose fractures were filled by calcite, dolomite, and anhydrite cements. Oil inclusions occurred within the fracture-fill cements indicate that fractures were open and played an active role during oil migration and charge. The highest measured values for secondary porosities belong to fractures in Asmari Formation, which is characterized by significant amounts of vug- and fracture-filling cements. Fractures facilitated fluid circulation and subsequently dissolution of allochems and high Mg carbonates. In contrast, fine-grained carbonate facies were less cemented, and thus, porosity enhancement by cement dissolution was insignificant. Temperature profiles of oil inclusions in the dolomite, calcite, and anhydrite minerals characterized by distinct variations in the homogenization temperatures (Th) that are divided into two ranges below 50°C in anhydrites and from 45°C to 125°C in dolomites and calcites. The lower Th ranges for anhydrite suggests that it may have formed at shallower burial depths during early to middle diagenesis. The oil inclusions display trend for increasing temperature downward which conform to Formation geothermal gradient. In other word, the decreasing trend of Th temperatures upward within Asmari Formation that can be observed in Th versus depth plot is consistent with the uplift events at Late Miocene time and later that caused removal of about 1,300 m of the crest of the Kuh-I-Mond anticline. Vitrinite reflectance data from source rock intervals in the field area do not support vertical migration of locally generated hydrocarbons into the Kuh-I-Mond accumulation, and long-distance lateral oil migration and charge from a source kitchen to the southwest is proposed. Vitrinite reflectance data from this dolomite and limestone reservoir suggest low maturation levels corresponding to paleotemperatures less than 50°C. The observed maturation level (<0.5% Ro) does not exceed values for simple burial maturation based on the estimated burial history. Also, homogenization temperatures from fluid inclusion populations in calcite and dolomites show expected good correlation with reflectance-derived temperatures. The Th data represent pore fluids became warmer and more saline during burial. As aqueous fluid inclusions in calcite veins were homogenized between 22°C and 90°C with a decrease in salinity from 22 to 18 eq.?wt.% NaCl. The Th values suggest a change in water composition and that dolomite and calcite cements might have precipitated from petroleum-derived fluids. The hydrocarbon fluid inclusions microthermometry data suggest that the reservoir was being filled by heavy black oils in reservoir during Cenozoic. Aqueous fluid inclusions hosted by calcite equant sparry/fossil cavity fills suggest low cementation temperatures (<45°C) and high salinities (19 eq.?wt.% NaCl), while those in dolostones are characterized by highly variable homogenization temperature (52°C to 125°C) and salinities (6.5 to 20 eq.?wt.% NaCl).  相似文献   

17.
通过铸体薄片、物性测试、扫描电镜等资料,对黔南坳陷平塘甘寨二叠系茅口组沉积相与储层特征进行深入分析,认为贵州平塘甘寨茅口组主要的岩石类型为亮晶-微晶生屑灰岩、生物灰岩、微晶灰岩、内碎屑亮晶灰岩、硅质岩、瘤状灰岩和含燧石灰岩等。茅口组生物种类较多,有介形虫、腹足、腕足、三叶虫、藻类、棘屑、蜒、珊瑚、海百合茎等。上述岩石学特征和生物组合指示平塘甘寨地区中二叠统茅口组为开阔碳酸盐台地沉积环境,包括台内滩和滩间两个亚相。储层特征分析结果表明,茅口组储集空间以晶间溶孔和晶间孔为主,具有明显的低孔低渗特征。局部溶蚀孔、构造裂缝相对较发育,对改造储层的孔渗性有重要的贡献。储层类型为碳酸盐岩裂缝-孔隙型储层,储层质量及发育部位受沉积相、成岩作用和构造活动多因素的控制。  相似文献   

18.
  相似文献   

19.
塔里木盆地下寒武统肖尔布拉克组白云岩储层特征及成因   总被引：2，自引：0，他引：2  
利用钻遇肖尔布拉克组的13口井和2条露头剖面的资料,分析了白云岩储层的宏观和微观特征,认为塔里木盆地下寒武统肖尔布拉克组主要发育9类岩性,孔隙的发育具有明显的岩相选择性,指出粉—细晶白云岩、砂屑白云岩、藻格架白云岩、泡沫绵层石白云岩、叠层石白云岩、凝块石白云岩和粘结(颗粒)白云岩是储层的主要载体。通过岩石学特征、多参数地球化学特征分析,结合地质背景,研究了肖尔布拉克组白云岩储层的成岩作用序列和孔隙演化史,明确了高能丘滩相的多孔沉积物是储层发育的物质基础,早表生期大气淡水溶蚀作用是储层形成的关键,埋藏(热液)溶蚀作用使储层得到了改善。  相似文献   

20.
四川盆地西南部中三叠统雷口坡组气藏主要的储层类型为碳酸盐颗粒滩储层。其主要发育两种储渗形式：砂屑云岩储层以残余粒间孔和粒间溶孔为储集空间,喉道以缩颈喉道和管束状喉道为主,孔喉配置关系较好,储层多表现为中孔中渗的特征;鲕粒灰岩储层和残余生屑云岩储层以粒内溶孔、铸模孔和生物体腔孔为储集空间,喉道欠发育,储层多表现为中孔、渗透率偏低的特征。进一步对储层的控制因素分析表明,颗粒滩为储层提供了早期的物质来源;单滩体的厚薄控制着储层的储渗形式;原生粒间孔的保存和同生期大气淡水淋溶作用分别是形成这两种储渗形式的颗粒滩储层的关键。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号