共查询到20条相似文献，搜索用时 15 毫秒
1.
双程波方程逆时深度偏移是复杂介质高精度成像的有效技术,但其结果中通常包含成像方法引起的噪音和假象,一般的滤波方法会破坏成像剖面上的振幅,其中的假象也会给后续地质解释带来困扰.将波场进行方向分解然后实现入射波与反射波的相关成像能够有效地消除这类成像噪音,并提高逆时偏移成像质量.波传播方向的分解通常在频率波数域实现,它会占用大量的存储和计算资源,不便于在沿时间外推的逆时深度偏移中应用.本文提出解析时间波场外推方法,可以在时间外推的每个时间片上实现波传播方向的显式分解,逆时深度偏移中利用分解后的炮检波场进行对应的相关运算,实现成像噪音和成像信号的分离.在模型和实际数据上的测试表明,相比于常规互相关逆时偏移成像结果,本文方法能够有效地消除低频成像噪音和特殊地质构造导致的成像假象. 相似文献
2.
随着我国勘探开发难度逐步增大,勘探目标开始向裂缝油气藏、岩性油气藏等复杂探区转移,研究高精度、适应性强的多波多分量深度偏移算法在后续的地震解释、属性分析及储层预测中具有重要意义.针对多波多分量地震数据,本文提出了一种二维弹性波时空域高斯束偏移方法.时空域高斯束沿中心射线传播时能够面向成像目标描述局部波场,且对振幅和频率可调制的Gabor基函数有天然的适应性,因而将基于Gabor分解的子波重构方法应用于震源波场构建,从而得到任意点源函数产生的时空域高斯束波场.该方法由于直接在时间域进行计算,可以避开频率域中出现的假频和边缘截断效应等问题.基于各向同性弹性波动方程的Kirchhoff-Helmholtz积分解,利用矢量时空域高斯束传播算子构建格林函数和格林位移张量,并结合上行射线追踪策略,实现了检波点波场的反向延拓.针对矢量波成像问题,本文借鉴弹性波逆时偏移方法从矢量延拓波场中分离出纯纵波分量和纯横波分量,进而采用修改后的内积成像条件产生具有明确物理意义的PP、PS成像结果,避免了转换波成像的极性反转问题.最后利用简单两层模型和不含盐体构造的部分Sigsbee2a模型的成像结果,并将其与应用近似纵横波成像条件、标量和矢量势成像条件的偏移剖面进行对比,验证了本文方法的正确性和有效性. 相似文献
3.
The τ-p transform is an invertible transformation of seismic shot records expressed as a function of time and offset into the τ (intercept time) and p (ray parameter) domain. The τ-p transform is derived from the solution of the wave equation for a point source in a three-dimensional, vertically non-homogeneous medium and therefore is a true amplitude process for the assumed model. The main advantage of this transformation is to present a point source shot record as a series of plane wave experiments. The asymptotic expansion of this transformation is found to be useful in reflection seismic data processing. The τ-p and frequency-wavenumber (or f-k) processes are closely related. Indeed, the τ-p process embodies the frequency-wavenumber transformation, so the use of this technique suffers the same limitations as the f-k technique. In particular, the wavefield must be sampled with sufficient spatial density to avoid wavenumber aliasing. The computation of this transform and its inverse transform consists of a two-dimensional Fast Fourier Transform followed by an interpolation, then by an inverse-time Fast Fourier Transform. This technique is extended from a vertically inhomogeneous three-dimensional medium to a vertically and laterally inhomogeneous three-dimensional medium. The τ-p transform may create artifacts (truncation and aliasing effects) which can be reduced by a finer spatial density of geophone groups by a balancing of the seismic data and by a tapering of the extremities of the seismic data. The τ-p domain is used as a temporary domain where the attack of coherent noise is well addressed; this technique can be viewed as ‘time-variant f-k filtering’. In addition, the process of deconvolution and multiple suppression in the τ-p domain is at least as well addressed as in the time-offset domain. 相似文献
4.
将多次波转换成反射波并按传统反射波偏移算法成像,是多次波成像的一种方法.聚焦变换能准确的将多次波转换为纵向分辨率更高的新波场记录,其中一阶多次波转换为反射波.本文对聚焦变换提出了两点改进:1)提出局部聚焦变换,以减小存储量和计算量,增强该方法对检波点随炮点移动的采集数据的适应性;2)引入加权矩阵,理论上证明原始记录的炮点比检波点稀疏时,共检波点道集域的局部聚焦变换可以将多次波准确转换成炮点与检波点有相同采样频率的新波场记录.本文在第一个数值实验中对比了对包含反射波与多次波的原始记录做局部聚焦变换和直接对预测的多次波做局部聚焦变换两种方案,验证了第二种方案转换得到的波场记录信噪比更高且避免了第一个方案中切聚焦点这项比较繁杂的工作.第二个数值实验表明:在炮点采样较为稀疏时,该方法能有效的将一阶多次波转换成反射波;转换的反射波能提供更丰富的波场信息,成像结果更均衡、在局部有更高的信噪比,以及较高的纵向分辨率. 相似文献
5.
现有的微震记录直接成像方法是将微震记录既当作入射记录,也当作散射记录,从而实现偏移成像.但此方法并不能突出透射波所携带的来自震源下方的深层散射波信息.本文在假设已知微震位置与子波的前提下,提出了对微震下方构造进行逆时偏移的成像方法.该方法类似于常规的逆时偏移,只是震源位置在地下.这使得在成像时,地下更深部的入射波场相比震源在地表时会更为精确,因此能够获得更加准确的成像结果.该方法会给成像结果带来一种尾波高频干扰：地下的震源发出的上行波与上方介质作用后,所产生的多级散射波会干扰反传波场.对此,在成像过程中,对入射场和散射场都进行左右行波分离,以压制该噪声.而在子波信息未知,无法重构入射场时,使用了激发时间成像条件,也能够实现同等效果的偏移成像,且不会出现尾波高频干扰.利用数值实验验证了本文方法的有效性. 相似文献
6.
按照井间地震的观测系统,用改进的突变点加插值射线追踪方法,追踪每炮每道的射线路径,计算几种主要类型的波沿射线路径的波至时间和射线振幅,制作井间地震多炮多道水平分量和垂直分量的合成记录.并将合成记录选排为井间共炮点道集、共接收点道集、共偏移距道集和共中心深度点道集,系统地分析了不同道集内几种主要类型的地震波的传播特征.对野外观测的实际井间地震记录进行了模拟,从复杂的井间地震记录中,识别出井间地震实际观测到的不同类型的波场,为随后的井间地震资料处理和应用提供了依据. 相似文献
7.
Zi-Shun Li 《应用地球物理》2012,9(3):286-292
To avoid spatial aliasing problems in broad band high resolution seismic sections, I present a high density migration processing solution. I first analyze the spatial aliasing definition for stack and migration seismic sections and point out the differences between the two. We recognize that migration sections more often show spatial aliasing than stacked sections. Second, from wave propagation theory, I know that migration output is a new spatial sampling process and seismic prestack time migration can provide the high density sampling to prevent spatial aliasing on high resolution migration sections. Using a 2D seismic forward modeling analysis, I have found that seismic spatial aliasing noise can be eliminated by high density spatial sampling in prestack migration. In a 3D seismic data study for Daqing Oilfield in the Songliao Basin, I have also found that seismic sections obtained by high-density spatial sampling (10 × 10 m) in prestack migration have less spatial aliasing noise than those obtained by conventional low density spatial sampling (20 × 40 m) in prestack migration. 相似文献
8.
A crucial point in the processing of 3D seismic data is the migration step, both because of its 3D nature and the computational cost involved. The efficiency and accuracy of 3D migration are determined by the wavefield extrapolation technique employed. Wavefield extrapolation based on second-order differential operators of variable-length is very efficient and accurate at the same time. Compared to migration based on the McClellan transform and operator splitting, the use of variable-length second-order differential operators offers significant advantages. The 3D migration operator has an almost perfect circular symmetry. No positioning errors in the 45° azimuth between the in-line and cross-line directions are evident. The method is, in practice, only limited by spatial aliasing and does not require expensive interpolation of data to reduce numerical artifacts. This reduces the computational cost of 3D one-pass depth migration by a large factor. 相似文献
9.
Stian Hegna Tilman Klüver Jostein Lima Jens F. Wisløff 《Geophysical Prospecting》2019,67(6):1472-1485
A marine seismic method based on continuous source and receiver wavefields has been developed. The method requires continuous recording of the seismic data. The source that may consist of multiple source elements can emit signals continuously while moving. The ideal source wavefield to be used with this method should be as white as possible both in a temporal and a spatial sense to avoid deep notches in the spectrum enabling a stable multi-dimensional deconvolution. White noise has such properties. However, equipment that can generate white noise does not exist. In order to generate a continuous source wavefield that is approaching the properties of white noise using existing equipment onboard marine seismic vessels, individual air-guns can be triggered with short randomized time intervals in a near-continuous fashion. The main potential benefits with the method are to reduce the environmental impact of marine seismic surveys and to improve acquisition efficiency. The peak sound pressure levels are significantly reduced by triggering one air-gun at a time compared to conventional marine seismic sources. Sound exposure levels are also reduced in most directions. Since the method is based on continuous recording of seismic data and the air-guns are triggered based on time and not based on position, there are less vessel speed limitations compared to conventional marine seismic data acquisition. Also, because the source wavefield is spread out in time, the wavefields emitted from source elements in different cross-line positions can be designed such that the emitted wavefield is spatially white in this direction. This means that source elements in multiple cross-line positions can be operated simultaneously, potentially improving the cross-line sampling and/or the acquisition efficiency. 相似文献
10.
反射波场分离是井孔地震资料处理中极其重要的一个环节,波场分离的质量直接影响成像结果的精度.不管是VSP还是井间地震资料,其反射波时距曲线都近似直线型,根据这一特征,本文提出一种改进的线性Radon变换方法来进行井孔资料的反射波上下行波场分离.该方法基于频率域线性Radon变换,通过引入一个新的变量λ来消除变换算子对频率的依赖性,避免了求取每一频率分量对应的不同变换算子,显著降低了计算成本;文中在求解该方法对应的最小二乘问题时,引入了发展较为成熟的高分辨率Radon变换技术来进一步提高波场分离的精度.采用本文方法进行井孔地震资料的上下行波场分离可以在保证分离精度的前提下有效地提高计算效率.根据上下行波在λ-f域内分布的特殊性,设计简单的滤波算子就可实现上下行波场的分离.最后通过合成数据试算以及实际资料处理（VSP数据和井间地震数据）验证了该方法的可行性和有效性. 相似文献
11.
Fabio Ciabarri Alfredo Mazzotti Eusebio Stucchi Nicola Bienati 《Geophysical Prospecting》2015,63(2):296-314
Least squares Fourier reconstruction is basically a solution to a discrete linear inverse problem that attempts to recover the Fourier spectrum of the seismic wavefield from irregularly sampled data along the spatial coordinates. The estimated Fourier coefficients are then used to reconstruct the data in a regular grid via a standard inverse Fourier transform (inverse discrete Fourier transform or inverse fast Fourier transform). Unfortunately, this kind of inverse problem is usually under‐determined and ill‐conditioned. For this reason, the least squares Fourier reconstruction with minimum norm adopts a damped least squares inversion to retrieve a unique and stable solution. In this work, we show how the damping can introduce artefacts on the reconstructed 3D data. To quantitatively describe this issue, we introduce the concept of “extended” model resolution matrix, and we formulate the reconstruction problem as an appraisal problem. Through the simultaneous analysis of the extended model resolution matrix and of the noise term, we discuss the limits of the Fourier reconstruction with minimum norm reconstruction and assess the validity of the reconstructed data and the possible bias introduced by the inversion process. Also, we can guide the parameterization of the forward problem to minimize the occurrence of unwanted artefacts. A simple synthetic example and real data from a 3D marine common shot gather are used to discuss our approach and to show the results of Fourier reconstruction with minimum norm reconstruction. 相似文献
12.
地震数据规则化重构是地震资料处理十分重要的基础性工作.压缩感知理论打破了香农采样定理的制约,利用信号在某个变换域的稀疏特性重构出完整的信号,在地震数据重构领域得到了很好的应用.深反射地震剖面大都布置在地质构造比较复杂的区段,复杂的地质构造使深反射地震剖面上的波阻特征复杂,采用单一稀疏变换不能最有效地表征数据的内部结构特征.MCA(形态成分分析)方法将信号分解为几种形态特征区别明显的分量来逼近数据的内部复杂结构,但是对各成分简单的叠加仍然无法有效地描述复杂构造数据的各种特征.结合两种方法的优点,本文提出了一种新的基于压缩感知的重构算法框架,在MCA方法的基础上对各稀疏字典进行加权,在迭代中不断更新各个稀疏字典的权值系数,对信号内部的各种特征进行最优描述,从而实现对信号的高质量重构.模型测试和实际资料处理结果表明:基于压缩感知的加权MCA方法不仅可以对地质构造复杂的地震数据进行高效的插值重建,而且可以很好的消除空间假频. 相似文献
13.
J.F.B. Bolte 《Geophysical Prospecting》2004,52(6):523-534
The common focal point (CFP) method and the common reflection surface (CRS) stack method are compared. The CRS method is a fast, highly automated procedure that provides high S/N ratio simulation of zero‐offset (ZO) images by combining, per image point, the reflection energy of an arc segment that is tangential to the reflector. It uses smooth parametrized two‐way stacking operators, based on a data‐driven triplet of attributes in 2D (eight parameters in 3D). As a spin‐off, the attributes can be used for several applications, such as the determination of the geometrical spreading factor, multiple prediction, and tomographic inversion into a smooth background velocity model. The CFP method aims at decomposing two‐way seismic reflection data into two full‐aperture one‐way propagation operators. By applying an iterative updating procedure in a half‐migrated domain, it provides non‐smooth focusing operators for prestack imaging using only the energy from one focal point at the reflector. The data‐driven operators inhibit all propagation effects of the overburden. The CFP method provides several spin‐offs, amongst which is the CFP matrix related to one focal point, which displays the reflection amplitudes as measured at the surface for each source–receiver pair. The CFP matrix can be used to determine the specular reflection source–receiver pairs and the Fresnel zone at the surface for reflection in one single focal point. Other spin‐offs are the prediction of internal multiples, the determination of reflectivity effects, velocity‐independent redatuming and tomographic inversion to obtain a velocity–depth model. The CFP method is less fast and less automated than the CRS method. From a pointwise comparison of features it is concluded that one method is not a subset of the other, but that both methods can be regarded as being to some extent complementary. 相似文献
14.
为达到更加有效地表示地震数据的目的,仅仅将地震数据当作普通的图像数据处理是远远不够的,地震数据中蕴含的地震波的运动学特性也应作为重要因素而被考虑到.本文讨论了利用Dreamlet变换方法实现地震数据压缩的方法,并针对地震数据本身所蕴含的频散关系特性进一步提出了多尺度Dreamlet变换压缩方法.Dreamlet变换由2个一维局部谐波变换的张量积构成,它在提供地震波场时间-空间局部化性质的同时可以保留波场的运动学特性.通过对二维SEG/EAGE叠前、叠后数据的算例说明了Dreamlet变换用于地震数据压缩的有效性.利用压缩后的数据进行成像的结果更表明,与Curvelet变换方法相比,Dreamlet与多尺度Dreamlet方法可以提供更高的压缩比;在相同压缩比的条件下,使用Dreamlet与多尺度Dreamlet方法压缩重建后的数据进行成像能更好地保留成像结果中的重要结构. 相似文献
15.
当前的三维VSP地震数据偏移成像实现都是在共炮点道集或共检波点道集中逐个道集循环进行的,计算效率相对较低.根据三维VSP观测系统中炮点和检波点布置的特殊性和地震波场满足线性叠加的特性,本文提出了一种三维VSP数据的高效偏移成像方法,即首先通过对三维VSP共接收点道集进行地震数据的广义合成得到一种超道集,然后在共接收点道集的波场深度外推过程中逐步应用多震源波场对超道集进行偏移成像,即利用一次波场深度外推循环完成对所有共检波点道集数据的偏移成像.通过三维VSP模型数据与实际地震数据的偏移成像试验验证了这种高效的超道集偏移成像方法可取得与常规共检波点道集相当的偏移成像效果,还具有极高的计算效率,其计算量与单个共检波点道集的偏移成像计算量相当. 相似文献
16.
Directional‐oriented wavefield imaging: a new wave‐based subsurface illumination imaging condition for reverse time migration 
下载免费PDF全文
下载免费PDF全文 The key objective of an imaging algorithm is to produce accurate and high‐resolution images of the subsurface geology. However, significant wavefield distortions occur due to wave propagation through complex structures and irregular acquisition geometries causing uneven wavefield illumination at the target. Therefore, conventional imaging conditions are unable to correctly compensate for variable illumination effects. We propose a generalised wave‐based imaging condition, which incorporates a weighting function based on energy illumination at each subsurface reflection and azimuth angles. Our proposed imaging kernel, named as the directional‐oriented wavefield imaging, compensates for illumination effects produced by possible surface obstructions during acquisition, sparse geometries employed in the field, and complex velocity models. An integral part of the directional‐oriented wavefield imaging condition is a methodology for applying down‐going/up‐going wavefield decomposition to both source and receiver extrapolated wavefields. This type of wavefield decomposition eliminates low‐frequency artefacts and scattering noise caused by the two‐way wave equation and can facilitate the robust estimation for energy fluxes of wavefields required for the seismic illumination analysis. Then, based on the estimation of the respective wavefield propagation vectors and associated directions, we evaluate the illumination energy for each subsurface location as a function of image depth point and subsurface azimuth and reflection angles. Thus, the final directional‐oriented wavefield imaging kernel is a cross‐correlation of the decomposed source and receiver wavefields weighted by the illuminated energy estimated at each depth location. The application of the directional‐oriented wavefield imaging condition can be employed during the generation of both depth‐stacked images and azimuth–reflection angle‐domain common image gathers. Numerical examples using synthetic and real data demonstrate that the new imaging condition can properly image complex wave paths and produce high‐fidelity depth sections. 相似文献
17.
基于反射波动方程,本文提出了一种估计地下反射率分布的地震数据最小二乘偏移方法.高频近似下,非齐次的一次反射波动方程的源项是由反射率与入射波场的时间一阶导数相互作用产生的.根据反射波动方程,利用线性最小二乘反演方法由地震反射数据重建出地下产生反射波的反射源,再结合波场正演计算出的地下入射波场,得到地下反射率分布的估计.在地下反射源的线性最小二乘反演重建中,我们采用迭代求解方法,并以地震波的检波器单向地下照明强度作为最小二乘优化问题中Hessian矩阵的近似. 相似文献
18.
因为在逆时偏移中基于双程波动方程构建震源波场和检波器波场,所以在波场延拓过程中地震波遇到波阻抗界面时,背向发育的反射波会与正常传播的波场互相关产生较强振幅的低频噪声.这一特点使得以逆时偏移为基础的最小二乘偏移方法在梯度计算时同样存在着低频噪声的干扰,从而导致反演收敛的速度减慢.考虑到计算量和存储成本的因素,本文借助Poynting矢量良好的方向指示性实现波场的上下行波分离,并在早期迭代的梯度计算中只保留震源波场和检波器波场沿不同垂直方向传播的组分之间的互相关,有效避免了成像噪声的干扰,提高了算法收敛的速率.数值算例验证了方案的有效性. 相似文献
19.
Multichannel filtering to obtain wavefield separation has been used in seismic processing for decades and has become an essential component in VSP and cross-well reflection imaging. The need for good multichannel wavefield separation filters is acute in borehole seismic imaging techniques such as VSP and cross-well reflection imaging, where strong interfering arrivals such as tube waves, shear conversions, multiples, direct arrivals and guided waves can overlap temporally with desired arrivals. We investigate the effects of preprocessing (alignment and equalization) on the quality of cross-well reflection imaging wavefield separation and we show that the choice of the multichannel filter and filter parameters is critical to the wavefield separation of cross-well data (median filters, f–k pie-slice filters, eigenvector filters). We show that spatial aliasing creates situations where the application of purely spatial filters (median filters) will create notches in the frequency spectrum of the desired reflection arrival. Eigenvector filters allow us to work past the limits of aliasing, but these kinds of filter are strongly dependent on the ratio of undesired to desired signal amplitude. On the basis of these observations, we developed a new type of multichannel filter that combined the best characteristics of spatial filters and eigenvector filters. We call this filter a ‘constrained eigenvector filter’. We use two real data sets of cross-well seismic experiments with small and large well spacing to evaluate the effects of these factors on the quality of cross-well wavefield separation. We apply median filters, f–k pie-slice filters and constrained eigenvector filters in multiple domains available for these data sets (common-source, common-receiver, common-offset and common-midpoint gathers). We show that the results of applying the constrained eigenvector filter to the entire cross-well data set are superior to both the spatial and standard eigenvector filter results. 相似文献
20.
提出了一种在时间和空间上完全局域化的波场分解和传播算法─dreamlet偏移方法.Dreamlet是一种脉冲-小波束形式的波场分解原子,它利用多维局部分解变换,把时空域波场映射到局部时间-频率-空间-波数相空间,并用局部相空间的传播算子(dreamlet算子)沿深度延拓.本文利用多维局部余弦变换实现dreamlet算法,分解后的波场系数和传播算子不仅有很好的稀疏性,且均为实数,也即波的传播和成像过程完全在实数域实现.文中推导了局部余弦基dreamlet波场分解和传播算子理论公式并将其应用于叠前深度偏移.在dreamlet相空间波的传播过程为稀疏矩阵相乘,而且延拓后的地表数据波场的有效时间长度随深度的增加不断减小,从而可以减少需要传播的波场系数.二维SEG/EAGE盐丘和SIGSBEE模型算例验证了理论推导的正确性,成像结果显示该方法在横向速度变化剧烈情况下有很好的精度. 相似文献