首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 359 毫秒
1.
Based on the study of lithology, sedimentology and paleontology at the Permian-Triassic boundary in Liaotian, Northwestern Jiangxi Province, the sequence stratigraphy and depositional environments across the boundary are reconstructed. The top part of the Upper Permian Changxing Formation is composed of very thick-bedded ligh-colored dolomitic limestone formed in high deposition rate on carbonate ramp,which indacates a transgression systems tract (TST). The Lower Triassic Qinglong Formation shows continuous deposition with the underlying Upper Permian. The lower member of Qinglong Formation consists of calcareous shale, shelly limestome and dolomitic limestone with abundant bivalves (Claraia sp.) and trace fossills (Chondrites). The calcareous shale at the bottom of Lower Triassic indicates a calm deep water environment to form the condensed section (CS). The shelly limestome and dolomitic limeston with shell fossils, intraclast, algal ooide show clean but turbulent environment of carbonate ramp, which produce the deposition of highstand systems tract (TST).  相似文献   

2.
The Mobarak Formation is near the town of Kiyasar in the south-east of Sari city, northern Iran. This formation conformably overlies the Geirud Formation (Upper Devonian). The lower part of the Mobarak Formation consisting of shales and thin- to medium-bedded limestone toward the top of these sequences changes into alternations of dark limestone and interbedded gray to black shales. Weathered yellow thick-bedded shales are observed at the top of the section. This formation is covered unconformably by sandstones attributed to the Dorud Formation (Lower Permian). The thickness of the formation in this region is 250 m. Four rock units have been recognized in this section. Foraminiferal biostratigraphy shows that the age of the Mobarak Formation in the Kiaysar region ranges from Lower Tournaisian to Early Middle Visean. The foraminifer Zones FAZ1 and FAZ2 are correlated with the Lower Tournaisian and Upper Tournaisian, whereas Zones FAZ3 and FAZ4 correlate with the Visean. Affinities exist between specimens recorded in the Kiyasar section with species known from other regions in eastern and Central Alborz, but there are important differences in their appearance.  相似文献   

3.
The stratigraphic sequence, framework and thickness of the abyssal-bathyal Cretaceous in Gyangze, the northern Tethyan Himalayas, South Xizang(Tibet), are revised in this paper. It is proposed that the Jiabula Formations: Chuangde Formation and Zongzhuo Formation constitute the Cretaceous in this area, in which their sequences, ages and thicknesses are distinctively different from the previous ones. The Jiabula Formation, aged from Berriasian to Santonian, is composed of black shale with intercalated turbiditic sandstone, lenticular limestone and pyrite  相似文献   

4.
Previous studies have shown that the oxidizing brines from the Early Permian Rotliegende sequence have influences on the organic matter of Kupferschiefer. However, inside the Rotliegende sequence there are two other black shales: the Lower and Upper Antracosia shales, which have not been studied as much in detail as in Kupferschiefer. In the present study 12 samples from the Lower and Upper Antracosia shales were analyzed by organic geochemical methods in order to clarify the influences of the oxidizing brines on organic matter. The results indicate that the organic matter of the samples from the Upper Antracosia shale and the bottom of the Lower Antracosia shale was oxidized under the influences of the oxidizing brines. The oxidation resulted in a depletion of saturated hydrocarbons and the alky Is of the aromatic compounds.  相似文献   

5.
The pores in shales are mainly of nanometer-scale, and their pore size distribution is very important for the preservation and exploitation of shale gas. This study focused on the organic-rich Lower Silurian black shale from four wells in the Upper Yangtze Platform, and their TOC, mineralogical composition and pore characterization were investigated. Low pressure N2 and CO2 adsorption were conducted at 77.35 K and 273.15 K, respectively, and the pore structures were characterized by modified Brunauer-Emmett-Teller (BET), Dubinin-Radushkevich (DR), t-plot, Barrett-Joyner-Halenda (BJH) and density functional theory (DFT) methods and then the relationship between pore structure and shale gas sorption capacity was discussed. The results indicate that (1) The Lower Silurian shale has high TOC content of 0.92%–4.96%, high quartz content of 30.6%–69.5%, and high clays content of 24.1%–51.2%. The total specific surface area varies from 7.56 m2/g to 25.86 m2/g. Both the total specific surface area and quartz content are positively associated with the TOC content. (2) Shale samples with higher TOC content have more micropores, which results in more complex nanopore structure. Micropore volumes/surface areas and non-micropore surface areas all increase with the increasing TOC content. (3) A combination of N2 and CO2 adsorption provides the most suitable detection range (~0.3–60 nm) and has high reliability and accuracy for nanopore structure characterization. (4) The TOC content is the key factor to control the gas sorption capacity of the Lower Silurian shale in the Upper Yangtze Platform.  相似文献   

6.
The Upper Ordovician Wufeng-Lower Silurian Longmaxi shale is widely distributed in the Sichuan Basin and its periphery, which is the key stratum for marine shale gas exploration and development(ED) in China. Based on sedimentary environment, material basis, storage space, fracability and reservoir evolution data, the reservoir characteristics of the Wufeng-Longmaxi shale and their significance for shale gas ED are systematically compared and analyzed in this paper. The results show that(1) the depocenter of the Wufeng(WF)-Longmaxi(LM) shale gradually migrates from east to west. The high-quality shale reservoirs in the eastern Sichuan Basin are mainly siliceous shales, which are primarily distributed in the graptolite shale interval of WF2-LM5. The high-quality reservoirs in the southern Sichuan Basin are mainly calcareous-siliceous and organic-rich argillaceous shales, which are distributed in the graptolite shale interval of WF2-LM7.(2) Deep shale gas(the burial depth 3500 m) in the Sichuan Basin has high-ultrahigh pressure and superior physical properties. The organic-rich siliceous, calcareous-siliceous and organic-rich argillaceous shales have suitable reservoir properties. The marginal area of the Sichuan Basin has a higher degree of pressure relief, which leads to the argillaceous and silty shales evolving into direct cap rocks with poor reservoir/good sealing capacity.(3) Combining shale gas exploration practices and impacts of lithofacies, depth, pressure coefficient and brittle-ductile transition on the reservoir properties, it is concluded that the favorable depth interval of the Wufeng-Longmaxi shale gas is 2200～4000 m under current technical conditions.(4) Aiming at the differential reservoir properties of the Wufeng-Longmaxi shale in the Sichuan Basin and its periphery, several suggestions for future research directions and ED of shale gas are formulated.  相似文献   

7.
The paper presents results of a laboratory experimental program performed on limestone rock samples, using both physical and mechanical methods. The studied rocks (Simsima Formation, Upper Cretaceous) can be classified as highly ferruginous and highly fossilliferous limestone. The lower part of the Simsima Formation contains common fauna such as Orbittoids, rhodolithic and rudists, whereas the upper part of the limestone is interbedded with conglomerates. Detailed geological, petrographic in addition to physical and mechanical tests were carried out on some representative samples from the Faiyah area, aiming at getting a better understanding of the important properties of these rocks. It is shown that the uniaxial unconfined compressive stress is the controlling factor of classification of the Faiyah limestone.  相似文献   

8.
The successful exploration and production of shale-gas resources in the United States and Canada sets a new possible solution towards the energy crisis presently affecting most countries of Asia. This study focuses on the use of well log and 2D seismic data for the characterization of the shale oil/gas potential of a Paleocene–Eocene succession — the Meyal area in the Potwar Basin of Pakistan. Two shaly plays are identified in Paleocene–Eocene strata in well logs using ΔLogR and modified ΔLogR cross-plot techniques. The results indicate that Paleocene shale(the Patala Formation) and the lower shaly part of Eocene limestone(Sakesar Formation) can be potentially mature source rocks. However, the thermal maturity modelling proves that only the Paleocene shale is mature. Our results also suggest that the maturity responses on ΔLogR models for the lower shaly part of the Eocene limestone are due to trapped hydrocarbons in the intra-formational fractures. Petroelastic/petrophysical analysis of the Patala Formation reveals two potential shale oil/gas zones on the basis of Young's modulus, Poisson's ratio, Brittleness index and Total Organic Content at an exploitation depth of 3980–3988 m. This work can provide valuable insight for estimating shale oil/gas potential in highly deformed basins not only in Asia but in other parts of the world.  相似文献   

9.
Upper Cretaceous phosphorite beds of the Duwi Formation, Upper Egypt, are intercalated with limestone, sandy limestone, marl, calcareous shales, and calcareous sandstone. Calcareous intercalations were subjected to field and detailed petrographic, mineralogical and geochemical investigations in order to constrain their rock composition and origin. Mineralogically, dolomite, calcite, quartz, francolite and feldspars are the non-clay minerals. Smectite, kaolinite and illite represent the clay minerals. Major and trace elements can be classified as the detrital and carbonate fractions based on their sources. The detrital fraction includes the elements that are derived from detrital sources, mainly clay minerals and quartz, such as Si, Al, Fe, Ti, K, Ba, V, Ni, Co, Cr, Zn, Cu, Zr, and Mo. The carbonate fraction includes the elements that are derived from carbonates, maily calcite and dolomite, such as Ca, Mg and Sr. Dolomite occurs as being dense, uniform, mosaic, very fine-to-fine, non-ferroan, and non-stoichiometrical, suggesting its early diagenetic formation in a near-shore oxidizing shallow marine environment. The close association and positive correlation between dolomite and smectite indicates the role of clay minerals in the formation of dolomite as a source of Mg^2＋ -rich solutions. Calcareous rocks were deposited in marine, oxidizing and weakly alkaline conditions, marking a semi-arid climatic period. The calcareous/argillaceous alternations are due to oscillations in clay/carbonate ratio.  相似文献   

10.
《地质学报》1958,37(3)
  相似文献   

11.
The Upper Ordovician Wufeng-Lower Silurian Longmaxi and the Lower Cambrian Qiongzhusi shales are the major targets for shale gas exploration and development in China. Although the two organic-rich shales share similar distribution ranges and thicknesses, they exhibit substantially different exploration and development results. This work analyzed the nanopore structures of the shale reservoirs in this region. Pore development of 51 shale samples collected from various formations and locations was compared using the petromineralogical, geochemical, structural geological and reservoir geological methods. The results indicate that the reservoir space in these shales is dominated by organic pores and the total pore volume of micropores, mesopores, macropores in different tectonic areas and formations show different trends with the increase of TOC. It is suggested that organic pores of shale can be well preserved in areas with simple structure and suitable preservation conditions, and the shale with smaller maximum ancient burial depth and later hydrocarbon-generation-end-time is also more conducive to pore preservation. Organic pore evolution models are established, and they are as follows: ① Organic matter pore development stage, ② Early stage of organic matter pore destruction, and ③ late stage of organic matter pore destruction. The areas conducive to pore development are favorable for shale gas development. Research results can effectively guide the optimization and evaluation of favorable areas of shale gas.  相似文献   

12.
Three-dimensional(3 D)static modelling techniques are applied to the characterization of the Qishn Formation(Fm.)in the Sharyoof oil field locating within the Masila basin,southeastern Yemen.The present study was initiated by the seismic structural interpretation,followed by building a 3 D structural framework,in addition to analysing well log data and from these,3 D facies and petrophysical models are constructed.In the Sharyoof oil field,the Qishn Fm.exhibits depth values within the range of 400-780 m below sea level,with a general increase towards the SSE.A set of high dip angle normal faults with a general ENE-WSW trend dissect the rocks.The strata are also folded as a main anticline with an axis that is parallel to the fault trend,formed as a result of basement uplift.According to the facies models,the Qishn Fm.comprises 43.83% limestone,21.53% shale,21.26% sandstone,13.21% siltstone and 0.17% dolomite.The Qishn Carbonates Member has low porosity values making it a potential seal for the underlying reservoirs whereas the Upper Qishn Clastics SI A and C have good reservoir quality and SIB has fair reservoir quality.The Upper Qishn Clastics S2 and S3 also have fair reservoir quality,while the Lower Qishn Clastics zone has good reservoir quality.The water saturation decreases towards the west and east and increases towards north and south.The total original oil in-place(OOIP)of the Upper Qishn clastics is 106 million STB within the SI A,SIC and S2 zones.Drilling of development wells is recommended in the eastern study area,where good trapping configuration is exhibited in addition to the presence of a potential seal(Upper Qishn Carbonates Member)and reservoir(Qishn Clastics Member)with high porosity and low water saturation.  相似文献   

13.
Shale gas is a resource of emerging importance in the energy field. Many countries in the world have been making big financial investments in this area. Carboniferous shale in the eastern Qaidam Basin shows good exploration prospects, but limited research and exploration work for shale oil and gas resources has been undertaken. Geochemical analyses were performed on shale derived from the Upper Carboniferous Hurleg Formation in the eastern Qaidam Basin, Qinghai Province, and secondary electron imaging capability of a Field Emission scanning electron microscope(FE-SEM) was used to characterize the microstructure of the shale. The reservoir and exploitation potential of the studied shale was assessed by comparison with research results obtained from the Barnett Formation shale in Fort Worth Basin, North America and the Basin shale of Sichuan province. The results indicate that the eastern Qaidam Basin Carboniferous shale is high-quality source rock. There are four major microstructural types in the study area: matrix intergranular pores, dissolution pores, intergranular pores, and micro-fractures. The size of the micropores varies from 6–633 nm, the majority of which is between 39–200 nm, with a relatively small number of micro-scale pores ranging from 0.13–1 μm. The pore characteristics of the studied shales are similar to the North American and Sichuanese shales, indicating that they have good reservoir potential. No micropores are present in the organic matter, which is induced by its composition; instead we found an important lamellar structure in the organic matter. These micropores and microfractures are abundant, and are connected to natural visible cracks that form the network pore system, which controls the storage and migration of shale gas. This connectivity is favorable for shale gas exploitation, providing great scientific potential and practical value.  相似文献   

14.
A low grade siliceous limestone sample from the Jayantipuram mine of Andhra Pradesh, India, has been investigated for its suitability for cement making. Petrological as well as X-ray diffraction pattern studies indicated that the limestone sample was crystalline and dominantly composed of calcite and quartz. They are simple in mineralogy, and yet they have variable silica and lime contents. Geochemical analysis results of twenty five hand picked samples indicated that the limestone from the Jayantipuram mine shows a wide range of variations in LOI (29.94% to 40.64%), SiO2 (6.14% to 27.18%), CaO (37.93% to 50.78%), Al2O3 (0.49% to 2.27%) and Fe2O3 (0.28% to 2.4%). MgO, K2O, Na2O, TiO2 and MnO2 are present in traces. CaO with LOI shows a strong positive correlation where as CaO with SiO2 shows a strong negative correlation because of mineralogical factors. The chemical composition of the limestone reflects its mineralogical composition. The distribution of various elements in the acid-soluble fraction has been studied by the factor analysis method in order to interpret in terms of their mineralogy, sedimentary environment and diagenesis. Mineralogy, recrystallization and other diagenetic changes are the main factors affecting the distribution of the elements and their mutual relationships in the limestone. The aim of this paper is also to analyze how significantly the two parameters, silica modulus and lime saturation factor, influence this low grade siliceous limestone sample from the Jayantipuram mine of Andhra Pradesh, India, for the cement making process from the geochemical data.  相似文献   

15.
The Carboniferous system in the Xiaohaizi area, Bachu County, Xinjiang Uygur Autonomous Region, composed of typical mixed terrigenous clastic, carbonate and sulphate sediments, was mainly deposited in the tidal flat and lagoon environments. The mixed sediments occur as the following eleven types: 1. limestone intercalated with siltstone; 2. interbeds of shale and limestone; 3. gypsolyte interbedded with limestone; 4. gypsolyte intercalated with siltstone; 5. gypsolyte interbedded with shale; 6. gypsolyte intercalated with siltstone, limestone and dolomite; 7. siltstone interbedded with gypsolyte and limestone; 8. terrigenous detritus scattered in carbonate matrix; 9. carbonate as cement in clastic rocks; 10. mixed sediments of carbonate and terrigenous mud; 11. mixed sediments of carbonate grains with terrigenous sand. Based on the analysis of the dynamic mechanism of mixed sediments, it is believed that these types of mixed sediments in the study area were controlled by climate, sea level change and so  相似文献   

16.
Spontaneous combustion of oil shale is very common as a result of long-time exposure to the air in the Fushun West Open-Pit Mine and West Dump. The PAHs in the high-grade off shale and its spontaneous combustion product were analyzed semiquantitatively by GC-MS in order to investigate their distribution in different states and their potential negative effects on the environment. Totally 57 and 60 PAHs and their alkyl homologues were identified in the two analyzed samples, among which the alkyl derivatives were predominant, taking up to about 65% in the total PAHs. Those low-molecular mass PAHs （3- or 4-ring） were the main compounds in the two samples. Ten of sixteen USEPA priority pollutant PAHs were detected in two samples, of which phenanthrene was the richest whose contents were 6.93% and 15.03%. Based on comparison of analysis results, the amount and contents of PAHs, except for triaromatic steroid group, were higher in the burning oil shale. So it can be determined that the effects caused by spontaneous combustion of oil shale would be more serious and that the effects of the Fushun oil shale and its spontaneous combustion on the environment should not be ignored in the future work.  相似文献   

17.
X-ray diffraction analysis of black shale of Upper Triassic Member Chang 7 of the Yanchang Formation in southeastern Ordos Basin showed that black shales were deposited in brackish, strongly reducing, semi-deep-deep lacustrine facies, and mainly composed of quartz, feldspar, carbonate （dolomite）, clay minerals （illite and il- lite/smectite） and a certain amount of pyrite. The mineral composition characteristics of this set of black shales are similar to those of highly productive shale gas in North America, for example shallow burial, low clay mineral and abundant brittle mineral, so the strata are conducive to the development of cracks and fractures. Thus, this area is favorable for shale oil/gas exploration and development.  相似文献   

18.
The compressibility of shale matrix reflects the effects of reservoir lithology, material composition, pore structure and tectonic deformation. It is important to understand the factors that influence shale matrix compressibility (SMC) and their effects on pore size distribution (PSD) heterogeneity in order to evaluate the properties of unconventional reservoirs. In this study, the volumes of pores whose diameters were in the range 6–100 nm were corrected for SMC for 17 shale samples from basins in China using high-pressure mercury intrusion and low-temperature nitrogen gas adsorption analyses, in order to investigate the factors influencing the SMC values. In addition, the variations in fractal dimensions before and after pore volume correction were determined, using single and multifractal models to explain the effects of SMC on PSD heterogeneity. In this process, the applicability of each fractal model for characterizing PSD heterogeneity was determined using statistical analyses. The Menger and Sierpinski single fractal models, the thermodynamic fractal model and a multi-fractal model were all used in this study. The results showed the following. The matrix compression restricts the segmentation of the fractal dimension curves for the single fractal Menger and Sierpinski models, which leads to a uniformity of PSD heterogeneity for different pore diameters. However, matrix compression has only a weak influence on the results calculated using a thermodynamic model. The SMC clearly affects the multifractal value variations, showing that the fractal dimension values of shale samples under matrix compression are small. Overall PSD heterogeneity becomes small for pores with diameters below 100 nm and the SMC primarily affects the PSD heterogeneity of higher pore volume areas. The comparison of fractal curves before and after correction and the variance analysis indicate that the thermodynamic model is applicable to quantitatively characterize PSD heterogeneity of shale collected from this sampling area. The results show that PSD heterogeneity increases gradually as micro-pore volumes increase.  相似文献   

19.
The Songliao Basin is one of the most important petroliferous basins in northern China. With a recent gradual decline in conventional oil production in the basin, the exploration and development of unconventional resources are becoming increasingly urgent. The Qingshankou Formation consists of typical Upper Cretaceous continental strata, and represents a promising and practical replacement resource for shale oil in the Songliao Basin. Previous studies have shown that low-mature to mature Qingshankou shale mainly preserves type Ⅰ and type Ⅱ1 organic matter, with relatively high total organic carbon(TOC) content. It is estimated that there is a great potential to explore for shale oil resources in the Qingshankou Formation in this basin. However, not enough systematic research has been conducted on pore characteristics and their main controlling factors in this lacustrine shale reservoir. In this study, 19 Qingshankou shales from two wells drilled in the study area were tested and analyzed for mineral composition, pore distribution and feature evolution using Xray diffraction(XRD), scanning electron microscopy(SEM), low-pressure nitrogen gas adsorption(N2-GA), and thermal simulation experiments. The XRD results show that clay, quartz, and feldspar are the dominant mineral constituents of Qingshankou shale. The clay minerals are mostly illite/smectite mixed layers with a mean content of 83.5%, followed by illite, chlorite, and kaolinite. There are abundant deposits of clay-rich shale in the Qingshankou Formation in the study area, within which many mineral and organic matter pores were observed using SEM. Mineral pores contribute the most to shale porosity;specifically, clay mineral pores and carbonate pores comprise most of the mineral pores in the shale. Among the three types of organic matter pores, type B is more dominant the other two. Pores with diameters greater than 10 nm supply the main pore volume;most are half-open slits and wedge-shaped pores. The total pore volume had no obvious linear relationship with TOC content, but had some degree of positive correlation with the content of quartz + feldspar and clay minerals respectively. However, it was negatively correlated with carbonate mineral content. The specific surface area of the pores is negatively related to TOC content, average pore diameter, and carbonate mineral content. Moreover, it had a somewhat positive correlation with clay mineral content and no clear linear relationship with the content of quartz + feldspar. With increases in maturity, there was also an increase in the number of carbonate mineral dissolution pores and organic matter pores, average pore diameter, and pore volume, whereas there was a decrease in specific surface area of the pores. Generally, the Qingshankou shale is at a low-mature to mature stage with a TOC content of more than 1.0%, and could be as thick as 250 m in the study area. Pores with diameters of more than 10 nm are well-developed in the shale. This research illustrates that there are favorable conditions for shale oil occurrence and enrichment in the Qingshankou shale in the study area.  相似文献   

20.
The study area, Nan Province, northern Thailand is geotectonically situated within the Nan-Uttaradit Suture, the once back-arc basin between the Sukhothai Zone and Indochina Block. Permian Fusulinacean fauna from limestone blocks within the suture has been investigated and the Nan area has been mapped in detail. These may provide the useful information for understanding the faunal assemblage and overall ge-ometry of stratigraphic successions in the basin. The strata were intensely folded and thrust. Scattered Per-mian limestones found in Nan area are blocks within shale interbedded with tuffaceous rock. The contact between this unit and the adjacent units, the strongly foliated shale and tuffaceous sedimentary strata that are mildly metamorphosed and giving phyllitic tex-tures, has been interpreted as a west-dipping normal fault, namely the Pha Sing Fault. This fault runs par-allel to the Highway no.1080 (Nan-Tha Wang Pha). Middle and early Late Permian fusulinacean fauna found in the Nan area contains Neoschwagerina, Pseudodoliolina, Colania, Lepidolina, and Colaniella. Additionally, late Early Permian fusulinacean and Middle Triassic radiolarian fauna have been reported in this area (e.g., Fontaine, 2002; Saesaengseerung et al. 2008). These paleontological data show the existence of Nan Back-arc Basin during late Early Permian (Artin-skian) to Middle Triassic. Moreover, the similarity of fusulinacean assemblage yielding Permian limestone blocks of the Nan Back-arc Basin and the ones of the Indochina Block has been interpreted that the Permian limestone blocks in the Nan Back-arc Basin were part of the continental shelf within the Indochina Block.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号