共查询到20条相似文献，搜索用时 62 毫秒
1.
DUAN Menglan GAO Zhaojie LIU Chuntu Senior Engineer China Classification Society Beijing China. Research Professor 《中国海洋工程》1998,(3)
To investigate the low temperature fatigue crack propagation behavior of offshore structuralsteel A131 under random ice loading,three ice failure modes that are commonly present in the Bohai Gulfare simulated according to the vibration stress responses induced by real ice loading.The test data are pro-cessed by a universal software FCPUSL developed on the basis of the theory of fatigue crack propagationand statistics.The fundamental parameter controlling the fatigue crack propagation induced by randomice loading is determined to be the amplitude root mean square stress intensity factor K_(arm).The test resultsare presented on the crack propagation diagram where the crack growth rate da/dN is described as thefunction of K_(arm).It is evident that the ice failure modes have great influence on the fatigue crack propaga-tion behavior of the steel in ice-induced vibration.However,some of the experimental phenomena and testresults are hard to be physically explained at present.The work in this paper is an init 相似文献
2.
Three types of ice loading, which are most commonly present when ice acts on structures, are chosen and simulated for use of fatigue crack propagation tests on offshore structural steel A131. The three types of ice categorized in accordance with the failure modes when acting on structures called crushing ice, bending ice, and buckling ice, respectively. This paper presents an experimental investigation on the fatigue crack propagation behavior of widely used high strength steel A131 for offshore jackets in the loading environment of ice crushing, bending, and buckling. The test results of fatigue crack propagation in steel A131 under these simulated ice loading at temperature 292K. are presented and analyzed in detail in this paper. The amplitude root mean square stress intensity factor is optimized to be the fundamental parameter of fatigue crack propagation for all types of ice loading histories. The results are also compared with constant amplitude fatigue crack propagation conclusions as in wave loa 相似文献
3.
DING Keqin DUAN Menglan FU Pinsheng LIU Chuntu
Ph. D. Associate Professor Research Department Center of Boiler Pressure Vessel Inspection Research Beijing P. R. China
Ph. D. Research Professor CCS Research Development Center China Classification Society Beijing P. R. China
Lecturer Yumen Petroleum School of Technique Technology Yumen P. R. China Research Professor 《中国海洋工程》1999,(4)
A simple probabilistic model for predicting crack growth behavior under random loading is pre-sented.In the model,the parameters c and m in the Paris-Erdogan Equation are taken as random variables,and their stochastic characteristic values are obtained through fatigue crack propagation tests on an offshorestructural steel under constant amplitude loading.Furthermore,by using the Monte Carlo simulation tech-nique,the fatigue crack propagation life to reach a given crack length is predicted.The tests are conducted toverify the applicability of the theoretical prediction of the fatigue crack propagation. 相似文献
4.
Corrosion and fatigue cracks are major threats to the structural integrity of aging offshore platforms.For the rational estimation of the safety levels of aging platforms,a global reliability assessment approach for aging offshore platforms with corrosion and fatigue cracks is presented in this paper.The base shear capacity is taken as the global ultimate strength of the offshore plaffoms,it is modeled as a random process that decreases with time in the presence of corrosion and fatigue crack propagation.And the corrosion and fatigue crack growth rates in the main members and key joints are modeled as random variables.A simulation method of the extreme wave loads which are applied to the structures of offshore platforms is proposed too.Furthermore,the statistics of global base shear capacity and extreme wave loads are obtained by Monte Carlo simulation method.On the basis of the limit state equation of global failure mode,the instantaneous reliability and time dependent reliability assessment methods are both presented in this paper.Finally the instantaueous reliability index and time dependent failure probability of a jacket platform are estimated with different ages in the demonstration example. 相似文献
5.
采用侧壁开槽型CT试样,分别在空气和3.5%NaCl溶液中进行腐蚀疲劳裂纹扩展试验,研究海底管道用钢X65在海水腐蚀环境下的腐蚀疲劳裂纹扩展特性。为保证试样既能满足腐蚀疲劳试验机的夹具要求,又可控制裂纹沿直线方向扩展,采用侧壁开槽技术对CT试样进行改进;利用有限元软件ABAQUS,建立三维模型,验证了对于侧壁开槽型CT试样,可以采用ASTM标准推荐的应力强度因子表达式对改进后CT试样开展数值计算。利用YYF-50腐蚀疲劳试验装置开展试验,试验结果表明:和惰性环境相比,腐蚀环境不仅会加速X65钢的裂纹扩展速率,还会降低腐蚀疲劳体系下裂纹扩展的门槛值;在腐蚀体系下存在裂纹扩展的稳定阶段,可采用Paris公式对其腐蚀疲劳裂纹扩展速率进行预测。 相似文献
6.
Gao Renliang Huang Chengkui Yang Guoxian Associate Professor Dalian University of Technology Dalian Senior Engineer Dalian University of Technology Dalian Professor Dalian University of Technology Dalian 《中国海洋工程》1993,(2)
This paper introduces the process and result of fatigue test of steel (Z direction steel) welded T tubular joints used in offshore engineering. Detailed measurement of stress concentration factor, stress distribution, fatigue life and crack development has been performed. Through analysis, an empirical formula of stress concentration factor for T tubular joints, fatigue S-N curve and crack propagation rule are obtained. 相似文献
7.
Corrosion and fatigue cracks are major threats to the structural integrity of aging offshore platforms. For the rational estimation of the safety levels of aging platforms, a global reliability assessment approach for aging offshore platforms with corrosion and fatigue cracks is presented in this paper. The base shear capacity is taken as the global ultimate strength of the offshore platforms. It is modeled as a random process that decreases with time in the presence of corrosion and fatigue crack propagati... 相似文献
8.
线性断裂力学中研究裂纹的扩展通常用应力强度因子的断裂准则，但是对复合型裂纹，应力强度因子理论就发生了困难。本文用光弹性方法求得裂纹前缘的应力强度因子，然后用应变能密度因子理论研究了船舶大开口舱口角隅处疲劳裂纹和Ｔ型管节点热点处表面裂纹的扩展规律和方向，得到较好的结果 相似文献
9.
提出了一种确定海洋平台钢裂纹扩展曲线的快速方法。该方法可以综合利用以往的经验数据和当前试验数据确定表面疲劳裂纹扩展速率曲线。与传统的只能利用当前试验数据确定表面疲劳裂纹扩展速率曲线相比。其可利用信息量大幅度增加,所以在精度相同的情况下,可以节省大量试件;而且在试样数一定的情况下。又可大大提高预测精度。文中还给出了海洋平台钢试验对比实例。 相似文献
10.
11.
海洋等工程结构物在服役过程中的受载历程是一个随机过程。研究裂纹在谱载荷作用下的扩展规律对可靠预报平台等结构物的疲劳寿命具有十分重要的意义。提出了一个由应力比和裂纹尖端约束及塑性区尺寸为主要参数计算裂纹张开比,来考查载荷相互作用下疲劳裂纹扩展寿命的计算模型。用该模型对几种谱载荷作用下疲劳实验结果进行了预测,将预测结果与不考虑裂纹闭合的线性损伤模型及疲劳计算程序FASTRAN的预测结果进行了比较,表明本模型能较好地预测谱载荷作用下的疲劳裂纹扩展。 相似文献
12.
为了拓展主S-N曲线法,使之更好地适用于低温、极地环境下船舶与海洋工程结构物的疲劳评估,进行了EH36材料T型焊接接头的低温疲劳性能试验,收集了国内外多个焊接节点低温疲劳数据,建立了疲劳试验试件的有限元模型,运用等效结构应力法,计算焊接节点的等效结构应力,构建低温环境下焊接节点的主S-N曲线。使用该曲线,预测低温疲劳试验的寿命,并与疲劳试验结果、常温主S-N曲线、常温中值D曲线的预测结果进行了比较,结果表明,所提低温主S-N曲线预测方法具有较高精度,可用于低温环境下船舶与海洋结构物疲劳寿命的预测。 相似文献
13.
基于EIFS和P-M的海底管道腐蚀疲劳寿命预测 总被引：1，自引：1，他引：0
鉴于腐蚀疲劳损伤的特殊性,研究了点蚀过程和腐蚀疲劳裂纹扩展过程。基于等效初始缺陷尺寸(EIFS)和线性累积损伤理论(P-M)方法,消除了点蚀形核、蚀坑生长及腐蚀疲劳短裂纹扩展对腐蚀疲劳寿命预测的影响;避免了基于单点蚀坑建立的腐蚀疲劳寿命预测表达式的弊端;合理地简化了随机荷载下腐蚀疲劳寿命的预测流程。利用现有试验数据,对基于EIFS和P-M方法建立的腐蚀疲劳寿命预测表达式进行了模型验证。结果显示,所提模型的有效性和合理性得到了验证,为工程实际中海底管道的腐蚀疲劳寿命预测提供了一种可行方法。 相似文献
14.
1 .IntroductionTheBohaiGulfisinfestedbyiceinthewholewinter,andoffshorestructuresthereexperiencenotonlywind ,waves ,currentsandearthquake ,butalsoiceloadswhicharecomplicatedbecauseofthedynamicinteractionbetweenicesheetsandstructures.Duanetal.( 2 0 0 0 )hadacomprehensivere viewofthelatestadvancesonice inducedvibration ,fatigueandfractureofoffshorestructures ,payingmuchattentiontothedifferencesinicebreakingmodeanddynamicsofstructuresindifferentice in festedwaters .Theypresentedcriticallythelates… 相似文献
15.
开展了5根锈胀开裂钢筋混凝土梁疲劳试验并实时记录了梁表面的钢筋压磁信号,研究锈胀开裂混凝土梁的疲劳特性和压磁信号演化规律。结果表明梁疲劳寿命随钢筋锈蚀率增大而急剧减小,梁破坏时混凝土剥落,纵筋发生疲劳断裂;磁信号时变曲线随疲劳进程不断演化,在临近疲劳破坏时曲线形态发生明显畸变,能够反映梁疲劳损伤信息;磁感应强度变化幅值的发展符合三阶段特性,在疲劳初期和破坏前增长明显;磁感应强度变化幅值对钢筋锈蚀敏感,随锈蚀率增加而增大,因此建立了疲劳作用不同阶段磁信号幅值和梁内钢筋锈蚀率的相关关系。 相似文献
16.
旨在了解箱型梁在极端循环载荷下的极限强度特性。利用非线性有限元方法来研究裂纹箱型梁的极限弯矩,分析了5种裂纹模型,探讨了裂纹类型、裂纹位置和裂纹长度的影响。考虑了两种载荷形式应用生死单元法对双向循环弯曲下裂纹扩展进行了模拟;并将由循环载荷引起的累积塑性损伤和疲劳裂纹损伤均考虑在内。无论单向循环还是双向循环,单裂纹模型的极限弯矩均小于双裂纹模型的极限弯矩;单边裂纹是最危险的裂纹类型。进一步分析了极端循环载荷下裂纹箱型梁的极限强度折减机理,得出了极限强度折减归因于这两种损伤的耦合作用的结论,并通过其他箱型梁验证了其适用性。 相似文献
17.
When studying the low-cycle fatigue crack initiation life of notched plates, the effects of fatigue short crack and accumulative plastic damage in the vicinity of the notch should be considered. The low-cycle fatigue crack initiation life of notched plates has been revised in the analysis process by considering the short crack initiation and expansion of notch stress concentration area. By determining the accumulative plastic deformation in the vicinity of a notch under low-cycle fatigue loads, a predictive model of low-cycle fatigue crack initiation life was presented for notched plates, and the relative influence factors were quantitatively analyzed. A comparison study verified that the results obtained from the presented calculation model correlate quite well with those from the existing experiments. Some important conclusions were drawn from the study on considering the effects of short crack and accumulative plastic damage. The presented method may be used for predicting the low-cycle fatigue crack initiation life of ship plate. 相似文献
18.
In this paper, results of comprehensive finite element (FE) analyses carried out on 81 generated models of tubular K-joints are presented. Results of FE models were verified against experimental data and parametric equations. The fatigue life of a tubular joint, which is commonly found in offshore industry, is not only dependent on the value of hot-spot stress (HSS), but is also significantly influenced by the through-the-thickness stress distribution characterized by the degree of bending (DoB). Data extracted from FE analyses was used to study the effects of geometrical parameters on the DoB values in tubular K-joints subjected to two types of out-of-plane bending (OPB) moment loads. The determination of DoB values in a tubular joint is essential for improving the accuracy of fatigue life estimation using the stress-life (S–N) method and particularly for predicting the fatigue crack growth based on the fracture mechanics (FM) approach. Geometrically parametric investigation was followed by a set of nonlinear regression analyses to develop DoB parametric formulas for the fatigue analysis of K-joints under OPB loadings. 相似文献
19.
An Integrated Approach to Fatigue Life Prediction of Whole System for Offshore Platforms 总被引：3，自引：0，他引：3
FANG Huacan 《中国海洋工程》2001,(2):177-184
The failure of one or even more components usually does not lead to the collapse of the whole structure. Most of the analysis of fatigue is centered on only a single component which the researchers are interested in or much attention should be paid to. However, the collapse of a structure is the result of failure of a series of components in a specific order or path. This paper proposes an integrated approach to fatigue life prediction of whole structural system for offshore platforms, mainly describing the basic principles and prediction method. A method is presented for determining the failure path of the whole structure system and calculating the fatigue life in the determined failure path. The corresponding final collapse criteria for the whole structure system are discussed. A simple method of equivalent fatigue stress range calculation and a mathematical model of structural component fatigue life estimation in consideration of sea wave and sea ice loads are provided. As an application of the propo 相似文献
20.
疲劳破坏是海洋结构物发生破坏的一种主要形式,深水半潜平台在海上运输、作业、停滞时会受到交变的风、浪、流载荷作用,进而引起结构关键节点处的疲劳损伤,影响平台安全性。以"海洋石油981"半潜钻井平台为研究对象,利用光纤光栅应变传感器对结构高应力区进行应力监测,获取测点处应力时历数据。将监测位置划分为四个监测板块,采用四点雨流计数法对测点应力进行处理,得到以离散形式给出的应力循环幅度与相应循环周次。参照DNV《海上钢结构疲劳设计规范》推荐的S-N曲线,基于Miner线性疲劳累计损伤原则,得到各个测点处的总体疲劳损伤度。选取具有最大疲劳损伤度的危险测点,并结合海上实测总时长,预测半潜平台的总体疲劳寿命。 相似文献