共查询到20条相似文献，搜索用时 31 毫秒
1.
Shergottites, Nakhlites, and Chassignites (SNC) are a small group of achondrites with crystallization ages of approximately 1.3 AE. Although it has recently been postulated the these meteorites came from Mars, the dynamical difficulties of ejecting large meteorites from a major planet have caused us to examine the alternative possibility that they crystallized from an impact melt formed on a large asteroid. The kinetic energy necessary to produce a crater of a given size is estimated; it is postulated that 25% of this energy is partitioned into heat, and the heat is distributed in this model in a pattern suggested by the impact melt distribution in Brent Crater and the radioactivity distribution in Cactus nucelear explosion crater. The time evolution of the temperature by heat conduction for several locations around the crater is computed. Crystallization times for the more deeply buried impact melts are form 5 × 104 years for 60-km-diameter craters and increase for larger craters. These times are long enough for the observed cumulate textures to develop. Once solidified, these rocks may be ejected from the asteroid by subsequent cratering events. Since asteroidal escape velocities are low, ejection may be accomplished by shock pressures too low to produce petrologically detectable shock features. The SNC meteorites could thus have originated in the asteroid belt, their young crystallization ages being due to melting induced by impacts occurring on asteroids long after condensation from the solar nebula. This scenario avoids the dynamical difficulties of a major planet origin, but raises questions of how the SNC's acquired their chemical and REE characteristics. To date, there seems to be no internally consistent model for the origin of these strange meteorites. The impact melt hypothesis is offered as a rational alternative to a Martian origin. Neither hypothesis explains all the problems. 相似文献
2.
Studies of the internal structure of asteroids, which are crucial for understanding their impact history and for hazard mitigation, appear to be in conflict for the S-type asteroids, Eros, Gaspra, and Ida. Spacecraft images and geophysical data show that they are fractured, coherent bodies, whereas models of catastrophic asteroidal impacts, family and satellite formation, and studies of asteroid spin rates, and other diverse properties of asteroids and planetary craters suggest that such asteroids are gravitationally bound aggregates of rubble. These conflicting views may be reconciled if 10-50 km S-type asteroids formed as rubble piles, but were later consolidated into coherent bodies. Many meteorites are breccias that testify to a long history of impact fragmentation and consolidation by alteration, metamorphism, igneous and impact processes. Ordinary chondrites, which are the best analogs for S asteroids, are commonly breccias. Some may have formed in cratering events, but many appear to have formed during disruption and reaccretion of their parent asteroids. Some breccias were lithified during metamorphism, and a few were lithified by injected impact melt, but most are regolith and fragmental breccias that were lithified by mild or moderate shock, like their lunar analogs. Shock experiments show that porous chondritic powders can be consolidated during mild shock by small amounts of silicate melt that glues grains together, and by friction and pressure welding of silicate and metallic Fe,Ni grains. We suggest that the same processes that converted impact debris into meteorite breccias also consolidated asteroidal rubble. Internal voids would be partly filled with regolith by impact-induced seismic shaking. Consolidation of this material beneath large craters would lithify asteroidal rubble to form a more coherent body. Fractures on Ida that were created by antipodal impacts and are concentrated in and near large craters, and small positive gravity anomalies associated with the Psyche and Himeros craters on Eros, are consistent with this concept. Spin data suggest that smaller asteroids 0.6-6 km in size are unconsolidated rubble piles. C-type asteroids, which are more porous than S-types, and their analogs, the volatile-rich carbonaceous chondrites, were probably not lithified by shock. 相似文献
3.
Abstract— Impact-induced comminution of planetary surfaces is pervasive throughout the solar system and occurs on submillimeter to global scales, resulting in comminution products that range from fine-grained surface soils, to massive, polymict ejecta deposits, to collisionally fragmented objects. Within this wide range of comminution products, we define regoliths in a narrow sense as materials that were processed by repetitive impacts to dimensional scales comparable to or smaller than that of component minerals of the progenitor rock(s). In this paper, we summarize a wide variety of impact experiments and other observations that were primarily intended to understand the evolution of regoliths on lunar basalt flows, and we discuss some of their implications for asteroidal surfaces. Cratering experiments in both rock and noncohesive materials, combined with photogeologic observations of the lunar surface, demonstrate that craters <500 m in diameter contribute most to the excavation of local bedrock for subsequent processing by micrometeorites. The overall excavation rate and, thus, growth rate of the debris layer decreases with time, because the increasingly thicker fragmental layer will prevent progressively larger projectiles from reaching bedrock. Typical growth rates for a 5 m thick lunar soil layer are initially (～≥3 Ga ago) a few mm/Ma and slowed to <1 mm/Ma at present. The coarse-grained crater ejecta are efficiently comminuted by collisional fragmentation processes, and the mean residence time of a 1 kg rock is typically 10 Ma. The actual comminution of either lithic or monomineralic detritus is highly mineral specific, with feldspar and mesostasis comminuting preferentially over pyroxene and olivine, thus resulting in mechanically fractionated fines, especially at grain sizes <20 μm. Such fractionated fines also participate preferentially in the shock melting of lunar soils, thus giving rise to “agglutinate” melts. As a consequence, agglutinate melts are systematically enriched in feldspar components relative to the bulk composition of their respective host soil(s). Compositionally homogeneous, impact derived glass beads in lunar soils seem to result from micrometeorite impacts on rock surfaces, reflecting lithic regolith components and associated mineral mixtures. Cumulatively, experimental and observational evidence from lunar mare soils suggests that regoliths derive substantially from the comminution of local bedrock; the addition of foreign, exotic components is not necessary to explain the modal and chemical compositions of diverse grain size fractions from typical lunar soils. Regoliths on asteroids are qualitatively different from those of the Moon. The modest impact velocities in the asteroid belt, some 5 km s?1, are barely sufficient to produce impact melts. Also, substantially more crater mass is being displaced on low-gravity asteroids compared to the Moon; collisional processing of surface boulders should therefore be more prominent in producing comminuted asteroid surfaces. These processes combine into asteroidal surface deposits that have suffered modest levels of shock metamorphism compared to the Moon. Impact melting does not seem to be a significant process under these conditions. However, the role of cometary particles encountering asteroid surfaces at presumably higher velocities has not been addressed in the past. Unfortunately, the asteroidal surface processes that seemingly modify the spectral properties of ordinary chondrites to match telescopically obtained spectra of S-type asteroids remain poorly understood at present, despite the extensive experimental and theoretical insights summarized in this report and our fairly mature understanding of lunar surface processes and regolith evolution. 相似文献
4.
William K. Hartmann 《Meteoritics & planetary science》2003,38(4):579-593
Abstract— The hypothesis of a lunar cataclysmic cratering episode between 3.8 and 3.9 Gyr ago lacks proof. Its strongest form proposes no cratering before about 4.0 Gyr, followed by catastrophic formation of most lunar craters and basins in >200 Myr. The premise that “zero impact melts implies zero impacts” is disproved by data from asteroids, on which early collisions clearly occurred, but from which early impact melts are scarce. Plausible cataclysm models imply that any cataclysm should have affected the whole inner solar system, but among available lunar and asteroid impact melt and impact age resetting data, a narrow, strong 3.8–3.9 Gyr spike in ages is seen only in the region sampled by Apollo/Luna. Reported lunar meteorite data do not show the spike. Asteroid data show a broader, milder peak, spreading from about 4.2 to 3.5 Gyr. These data suggest either that the spike in Apollo impact melt ages is associated with unique lunar front side events, or that the lunar meteorites data represent different kinds of events than the Apollo/Luna data. Here, we develop an alternate “megaregolith evolution” hypothesis to explain these data. In this hypothesis, early impact melts are absent not because there were no impacts, but because the high rate of early impacts led to their pulverization. The model estimates survival halflives of most lunar impact melts prior to 4.1 Gyr at >100 Myr. After a certain time, Tcritical ?4.0 Gyr, impact melts began to survive to the present. The age distribution differences among impact melts and plutonic rocks are controlled by, and hold clues to, the history of regolith evolution and the relative depths of sequestration of impact melts versus plutonic rocks, both among lunar and asteroidal samples. Both the “zero cratering, then cataclysm” hypothesis and the “megaregolith evolution” hypothesis require further testing, especially with lunar meteorite impact melt studies. 相似文献
5.
Friedrich Hrz Mark J. Cintala Thomas H. See Loan Le 《Meteoritics & planetary science》2005,40(9-10):1329-1346
Abstract— A series of 59 impacts in the laboratory reduced a coherent 460 g piece of the L6 ordinary chondrite ALH 85017 to a coarse‐grained “regolith.” We then subjected the 125–250 μm fines from this sample to reverberation shock stresses of 14.5–67 GPa in order to delineate the melting behavior of porous, unconsolidated, chondritic asteroid surfaces during meteorite impact. The initial pore space (40–50%) was completely closed at 14.5 GPa and a dense aggregate of interlocking grains resulted. Grain‐boundary melting commenced at <27 GPa and ?50% of the total charge was molten at 67 GPa; this stress corresponds to typical asteroid impacts at ?5 km/sec. Melting of the entire sample most likely mandates >80 GPa, which is associated with impact velocities >8 km/sec. The Fe‐Ni and troilite clasts of the original meteorite melted with particular ease, forming immiscible melts that are finely disseminated throughout the silicate glass. These metal droplets are highly variable in size, extending to <100 nm and most likely to superparamagnetic domains; such opaques are also observed in the natural melt veins of ordinary chondrites. It follows that melting and dissemination of pre‐existing, Fe‐rich phases may substantially affect the optical properties of asteroidal surfaces. It seems unnecessary to invoke reduction of Fe2+ (or Fe3+) by sputtering or impact‐processes—in analogy to the lunar surface—to produce “space weathering” effects on S‐type asteroids. We note that HED meteorites contain ample FeO (comparable to that in lunar basalts) for reduction processes to take place, yet their probable parent object(s), Vesta and its collisional fragments, display substantially unweathered surfaces. Howardites, eucrites, and diogenites (HEDs), however, contain little native metal (typically <0.5%), in contrast to ordinary chondrites (commonly 10–15%) and their S‐type parent objects. These considerations suggest that the modal content of native metal and sulfides is more important for space weathering on asteroids than total FeO. 相似文献
6.
Impact cratering on porous asteroids 总被引：1，自引：0，他引：1
The increasing evidence that many or even most asteroids are rubble piles underscores the need to understand how porous structures respond to impact. Experiments are reported in which craters are formed in porous, crushable, silicate materials by impacts at 2 km/s. Target porosity ranged from 34 to 96%. The experiments were performed at elevated acceleration on a centrifuge to provide similarity conditions that reproduce the physics of the formation of asteroid craters as large as several tens of kilometers in diameter.Crater and ejecta blanket formation in these highly porous materials is found to be markedly different from that observed in typical dry soils of low or moderate porosity. In highly porous materials, the compaction of the target material introduces a new cratering mechanism. The ejection velocities are substantially lower than those for impacts in less porous materials. The experiments imply that, while small craters on porous asteroids should produce ejecta blankets in the usual fashion, large craters form without ejecta blankets. In large impacts, most of the ejected material never escapes the crater. However, a significant crater bowl remains because of the volume created by permanent compaction of the target material. Over time, multiple cratering events can significantly increase the global density of an asteroid. 相似文献
7.
Shock metamorphism of planetary silicate rocks and sediments: Proposal for an updated classification system 
下载免费PDF全文
下载免费PDF全文 We reevaluate the systematics and geologic setting of terrestrial, lunar, Martian, and asteroidal “impactites” resulting from single or multiple impacts. For impactites derived from silicate rocks and sediments, we propose a unified and updated system of progressive shock metamorphism. “Shock-metamorphosed rocks” occur as lithic clasts or melt particles in proximal impactites at impact craters, and rarely in distal impactites. They represent a wide range of metamorphism, typically ranging from unshocked to shock melted. As the degree of shock metamorphism, at a given shock pressure, depends primarily on the mineralogical composition and the porosity of a rock or sediment sample, different shock classification systems are required for different types of planetary rocks and sediments. We define shock classification systems for eight rock and sediment classes which are assigned to three major groups of rocks and sediments (1) crystalline rocks with classes F, M, A, and U; (2) chondritic rocks (class C); and (3) sedimentary rocks and sediments with classes SR, SE, and RE. The abbreviations stand for felsic (F), mafic (M), anorthositic (A), ultramafic (U), sedimentary rocks (SR), unconsolidated sediments (SE), and regoliths (RE). In each class, the progressive stages of shock metamorphism are denominated S1 to Sx. These progressive shock stages are introduced as: S1–S7 for F , S1–S7 for M, S1–S6 for A , S1–S7 for U , S1–S7 for C , S1–S7 for SR , S1–S5 for SE , and S1–S6 for RE . S1 stands for “unshocked” and Sx (variable between S5 and S7) stands for “whole rock melting.” We propose a sequence of symbols characterizing the degree of shock metamorphism of a sample, i.e., F-S1 to F-S7 with the option to add the tabulated pressure ranges (in GPa) in parentheses. 相似文献
8.
Impact-induced seismic vibrations have long been suspected of being an important surface modification process on small satellites and asteroids. In this study, we use a series of linked seismic and geomorphic models to investigate the process in detail. We begin by developing a basic theory for the propagation of seismic energy in a highly fractured asteroid, and we use this theory to model the global vibrations experienced on the surface of an asteroid following an impact. These synthetic seismograms are then applied to a model of regolith resting on a slope, and the resulting downslope motion is computed for a full range of impactor sizes. Next, this computed downslope regolith flow is used in a morphological model of impact crater degradation and erasure, showing how topographic erosion accumulates as a function of time and the number of impacts. Finally, these results are applied in a stochastic cratering model for the surface of an Eros-like body (same volume and surface area as the asteroid), with craters formed by impacts and then erased by the effects of superposing craters, ejecta coverage, and seismic shakedown. This simulation shows good agreement with the observed 433 Eros cratering record at a Main Belt exposure age of 400±200 Myr, including the observed paucity of small craters. The lowered equilibrium numbers (loss rate = production rate) for craters less than ∼100 m in diameter is a direct result of seismic erasure, which requires less than a meter of mobilized regolith to reproduce the NEAR observations. This study also points to an upper limit on asteroid size for experiencing global, surface-modifying, seismic effects from individual impacts of about 70-100 km (depending upon asteroid seismic properties). Larger asteroids will experience only localized (regional) seismic effects from individual impacts. 相似文献
9.
Analytical estimates of melt volumes produced by a given projectile and contained in a given impact crater are derived as a function of impact velocity, impact angle, planetary gravity, target and projectile densities, and specific internal energy of melting. Applications to impact events and impact craters on the Earth, Moon, and Mars are demonstrated and discussed. The most probable oblique impact (45°) produces ～1.6 times less melt volume than a vertical impact, and ～1.6 and 3.7 times more melt volume than impacts with 30° and 15° trajectories, respectively. The melt volume for a particular crater diameter increases with planetary gravity, so a crater on Earth should have more melt than similar-size craters on Mars and the Moon. The melt volume for a particular projectile diameter does not depend on gravity, but has a strong dependence on impact velocity, so the melt generated by a given projectile on the Moon is significantly larger than on Mars. Higher surface temperatures and geothermal gradients increase melt production, as do lower energies of melting. Collectively, the results imply thinner central melt sheets and a smaller proportion of melt particles in impact breccias on the Moon and Mars than on Earth. These effects are illustrated in a comparison of the Chicxulub crater on Earth, linked to the Cretaceous–Tertiary mass extinction, Gusev crater on Mars, where the Mars Exploration Rover Spirit landed, and Tsiolkovsky crater on the Moon. The results are comparable to those obtained from field and spacecraft observations, other analytical expressions, and hydrocode simulations. 相似文献
10.
The maximum size of impact craters on finite bodies marks the largest impact that can occur short of impact induced disruption of the body. Recently attention has started to focus on large craters on small bodies such as asteroids and rocky and icy satellites. Here the large crater on the recently imaged Asteroid (2867) Steins (with crater diameter to mean asteroid radius ratio of 0.79) is shown to follow a limit set by other similar sized bodies with moderate macroporosity (i.e. fractured asteroids). Thus whilst large, the crater size is not novel, nor does it require Steins to possess an extremely large porosity. In one of the components of the binary Asteroid (90) Antiope there is the recently reported presence of an extremely large depression, possibly a crater, with depression diameter to mean asteroid radius ratio of ∼(1.4–1.62). This is consistent with the maximum size of a crater expected from previous observations of very porous rocky bodies (i.e. rubble-pile asteroids). Finally, a relationship between crater diameter (normalised to body radius) is proposed as a function of body porosity which suggests that the doubling of porosity between fractured asteroids and rubble-pile asteroids, nearly doubles the size (D/R value) of the largest crater sustainable on a rocky body. 相似文献
11.
Erik ASPHAUG 《Meteoritics & planetary science》2008,43(6):1075-1084
Abstract— If impact stress reverberation is the primary gradational process on an asteroid at global scales, then the largest undegraded crater records an asteroid's seismological response. The critical crater diameter Dcrit is defined as the smallest crater whose formation disrupts all previous craters globally up to its size; it is solved for by combining relationships for crater growth and for stress attenuation. The computation for Dcrit gives a simple explanation for the curious observation that small asteroids have only modest undegraded craters, in comparison to their size, whereas large asteroids have giant undegraded craters. Dcrit can even exceed the asteroid diameter, in which case all craters are “local” and the asteroid becomes crowded with giant craters. Dcrit is the most recent crater to have formed on a blank slate; when it is equated to the measured diameter of the largest undegraded crater on known asteroids, peak particle velocities are found to attenuate with the 1.2–1.3 power of distance—less attenuative than strong shocks, and more characteristic of powerful seismic disturbances. This is to be expected, since global degradation can result from seismic (cm s?1) particle velocities on small asteroids. Attenuation, as modeled, appears to be higher on asteroids known to be porous, although these are also bodies for which different crater scaling rules might apply. 相似文献
12.
A large number of shock recovery experiments that address the ease of impact melt formation as a function of peak shock pressure lead to the conclusion that impacts at 5 km/sec into fragmental, porous surfaces will produce agglutinate-type glasses; no shock melts are produced at these velocities in dense silicate target rocks. While agglutinitic glasses dominate lunar surface soils, they are virtually absent in gas-rich, brecciated meteorites. This apparent paucity—if not complete lack—of agglutinate-type glasses is also inferred from remote IR-reflectance spectroscopy. The need to identify mechanisms that inhibit agglutinate formation on asteroidal sufaces was recognized previously and was predominantly attributed to lower projectile velocities and different gravitational environments.We will argue in this paper that additional mechanisms may be required. Specifically we propose that spall processes at a target's free surface play a major role in asteroidal surface evolution. At 5 km/sec collision velocity, a target (RT) to projectile (RP radius ratio of delineates the boundary between an “infinite half-space” and a “finite”-sized target. In the first case, collisional energy is expended in a pure cratering regime; in the latter, additional displacement of target material in the form of spallation products occurs. The spall volume may exceed the crater volume by an order of magnitude. Therefore fragmental impact deposits on small planetary bodies may be entirely controlled by spall products, rather than crater ejecta. Because tensile failure occurs at <0.2 GPa stress, spall velocities are measured in meters per second (contrary to crater ejecta) and therefore spallation products are efficiently retained even in low gravitational environments. Spall products are also more coarse grained than crater ejecta; they are also highly biased toward petrographically “unshocked” (<0.2 GPa) rocks.Thus asteroidal surface deposits should be more coarse grained and less shocked than lunar ones—consistent with meteorite evidence and remote-sensing observations. Because spall volume exceeds crater ejecta volume, the total growth rate of asteroidal surface deposits is accelerated, leading to relatively short surface residence times of individual meteorite components, another significant difference between lunar and asteroidal surface materials. 相似文献
13.
Dieter Stffler Natalia A. Artemieva Elisabetta Pierazzo 《Meteoritics & planetary science》2002,37(12):1893-1907
Abstract— Using detailed geological, petrographic, geochemical, and geographical constraints we have performed numerical modeling studies that relate the Steinheim crater (apparent diameter Da = 3.8 km), the Ries crater (Da = 24 km) in southern Germany, and the moldavite (tektite) strewn field in Bohemia and Moravia (Czech Republic), Lusatia (East Germany), and Lower Austria. The moldavite strewn field extends from ～200 to 450 km from the center of the Ries to the east‐northeast forming a fan with an angle of ～57°. An oblique impact of a binary asteroid from a west‐southwest direction appears to explain the locations of the craters and the formation and distribution of the moldavites. The impactor must have been a binary asteroid with two widely separated components (some 1.5 and 0.15 km in diameter, respectively). We carried out a series of three‐dimensional hydrocode simulations of a Ries‐type impact. The results confirm previous results suggesting that impacts around 30–50° (from the horizontal) are the most favorable angles for near‐surface melting, and, consequently for the formation of tektites. Finally, modeling of the motion of impact‐produced tektite particles through the atmosphere produces, in the downrange direction, a narrow‐angle distribution of the moldavites tektites in a fan like field with an angle of ～75°. An additional result of modeling the motion of melt inside and outside the crater is the preferred flow of melt from the main melt zone of the crystalline basement downrange towards the east‐northeast rim. This explains perfectly the occurrence of coherent impact melt bodies (some tens of meters in size) in a restricted zone of the downrange rim of the Ries crater. The origin of these melt bodies, which represent chemically a mixture of crystalline basement rocks similar to the main melt mass contained (as melt particles <0.5 m in size) in the suevite, do not occur at any other portion of the Ries crater rim and remained enigmatic until now. Although the calculated distribution of moldavites still deviates to some degree from the known distribution, our results represent an important step toward a better understanding of the origin and distribution of the high‐velocity surface melts and the low‐velocity, deep‐seated melt resulting from an oblique impact on a stratified target. 相似文献
14.
G. R. OSINSKI R. A. F. GRIEVE G. S. COLLINS C. MARION P. SYLVESTER 《Meteoritics & planetary science》2008,43(12):1939-1954
Abstract— Impact cratering is an important geological process on the terrestrial planets and rocky and icy moons of the outer solar system. Impact events generate pressures and temperatures that can melt a substantial volume of the target; however, there remains considerable discussion as to the effect of target lithology on the generation of impact melts. Early studies showed that for impacts into crystalline targets, coherent impact melt rocks or “sheets” are formed with these rocks often displaying classic igneous structures (e.g., columnar jointing) and textures. For impact structures containing some amount of sedimentary rocks in the target sequence, a wide range of impact‐generated lithologies have been described, although it has generally been suggested that impact melt is either lacking or is volumetrically minor. This is surprising given theoretical constraints, which show that as much melt should be produced during impacts into sedimentary targets. The question then arises: where has all the melt gone? The goal of this synthesis is to explore the effect of target lithology on the products of impact melting. A comparative study of the similarly sized Haughton, Mistastin, and Ries impact structures, suggests that the fundamental processes of impact melting are basically the same in sedimentary and crystalline targets, regardless of target properties. Furthermore, using advanced microbeam analytical techniques, it is apparent that, for the structures under consideration here, a large proportion of the melt is retained within the crater (as crater‐fill impactites) for impacts into sedimentary‐bearing target rocks. Thus, it is suggested that the basic products are genetically equivalent but they just appear different. That is, it is the textural, chemical and physical properties of the products that vary. 相似文献
15.
Abstract— Chicxulub and Sudbury are 2 of the largest impact structures on Earth. Research at the buried but well‐preserved Chicxulub crater in Mexico has identified 6 concentric structural rings. In an analysis of the preserved structural elements in the eroded and tectonically deformed Sudbury structure in Canada, we identified ring‐like structures corresponding in both radius and nature to 5 out of the 6 rings at Chicxulub. At Sudbury, the inner topographic peak ring is missing, which if it existed, has been eroded. Reconstructions of the transient cavities for each crater produce the same range of possible diameters: 80–110 km. The close correspondence of structural elements between Chicxulub and Sudbury suggests that these 2 impact structures are approximately the same size, both having a main structural basin diameter of ?150 km and outer ring diameters of ?200 km and ?260 km. This similarity in size and structure allows us to combine information from the 2 structures to assess the production of shock melt (melt produced directly upon decompression from high pressure impact) and impact melt (shock melt and melt derived from the digestion of entrained clasts and erosion of the crater wall) in large impacts. Our empirical comparisons suggest that Sudbury has ?70% more impact melt than does Chicxulub (?31,000 versus ?18,000 km3) and 85% more shock melt (27,000 km3 versus 14,500 km3). To examine possible causes for this difference, we develop an empirical method for estimating the amount of shock melt at each crater and then model the formation of shock melt in both comet and asteroid impacts. We use an analytical model that gives energy scaling of shock melt production in close agreement with more computationally intense numerical models. The results demonstrate that the differences in melt volumes can be readily explained if Chicxulub was an asteroid impact and Sudbury was a comet impact. The estimated 70% difference in melt volumes can be explained by crater size differences only if the extremes in the possible range of melt volumes and crater sizes are invoked. Preheating of the target rocks at Sudbury by the Penokean Orogeny cannot explain the excess melt at Sudbury, the majority of which resides in the suevite. The greater amount of suevite at Sudbury compared to Chicxulub may be due to the dispersal of shock melt by cometary volatiles at Sudbury. 相似文献
16.
This paper considers the extent to which Martian craters can be explained by considering asteroidal impact. Sections I, II, and III of this paper derive the diameter distribution of hypothetical asteroidal craters on Mars from recent Palomar-Leiden asteroid statistics and show that the observed Martian craters correspond to a bombardment by roughly 100 times the present number of Mars-crossing asteroids. Section IV discusses the early bombardment history of Mars, based on the capture theory of Öpik and probable orbital parameters of early planetesimals. These results show that the visible craters and surface of Mars should not be identified with the initial, accreted surface. A backward extrapolation of the impact rates based on surviving Mars-crossing asteroids can account for the majority of Mars craters over an interval of several aeons, indicating that we see back in time no further than part-way into a period of intense bombardment. An early period of erosion and deposition is thus suggested. Section V presents a comparison with results and terminology of other authors. 相似文献
17.
Laser‐induced melting experiments: Simulation of short‐term high‐temperature impact processes 下载免费PDF全文
下载免费PDF全文 This study introduces an experimental approach using direct laser irradiation to simulate the virtually instantaneous melting of target rocks during meteorite impacts. We aim at investigating the melting and mixing processes of projectile (iron meteorite; steel) and target material (sandstone) under idealized conditions. The laser experiments (LE) were able to produce features very similar to those of impactites from meteorite craters and cratering experiments, i.e., formation of lechatelierite, partial to complete melting of sandstone, and injection of projectile droplets into target melts. The target and projectile melts have experienced significant chemical modifications during interaction of these coexisting melts. Emulsion textures, observed within projectile‐contaminated target melts, indicate phase separation of silicate melts with different chemical compositions during quenching. Reaction times of 0.6 to 1.4 s could be derived for element partitioning and phase‐separation processes by measuring time‐depended temperature profiles with a bolometric detector. Our LE allow (i) separate melting at high temperatures to constrain primary melt heterogeneities before mixing of projectile and target, (ii) quantification of element partitioning processes between coexisting projectile and target melts, (iii) determination of cooling rates, and (iv) estimation of reaction times. Moreover, we used a thermodynamic approach to calculate the entropy gain during laser melting. The entropy changes for laser‐melting of sandstone and iron meteorite correspond to shock pressures and particle velocities produced during the impact of an iron projectile striking a quartz target at a minimum impact velocity of ~6 km s?1, inducing peak shock pressures of ~100 GPa in the target. 相似文献
18.
We develop a physical model for the evolution of regoliths on small bodies and apply it to the asteroids and meteorite parent bodies. The model considers global deposition of that fraction of cratering ejecta that is not lost to space. It follows the build up of regolith on a typical region, removed from the larger craters which are the source of most regolith blankets. Later in the evolution, larger craters saturate the surface and are incorporated into the typical region; their net ejection of materials to space causes the elevation of the typical region to decrease and once-buried regolith becomes susceptible to ejection or gardening. The model is applied to cases of both strong, cohesive bodies and to bodies of weak, unconsolidated materials. Evolution of regolith depths and gardening rates are followed until a sufficiently large impact occurs that fractures the entire asteroid. (Larger asteroids are not dispersed, however, and evolve mergaregoliths from multiple generations of surficial regoliths mixed into their interiors.) We find that large, strong asteroids generate surficial regoliths of a few kilometers depth while strong asteroids smaller than 10-km diameter generate negligible regoliths. Our model does not treat large, weak asteroids, because their cratering ejecta fail to surround such bodies; regolith evolution is probably similar to that of the Moon. Small, weak asteroids of 1- to 10-km diameter generate centimeter- to meter-scale regoliths. In all cases studied, blanketing rates exceed excavation rates, so asteroid regoliths are rarely, if ever, gardened and should be very immature measured by lunar standards. They should exhibit many of the characteristics of the brecciated, gas-rich meteorites; intact foreign clasts, relatively low-exposure durations to galactic and solar cosmic rays low solar gas contents, minimal evidence for vitrification and agglutinate formation, etc. Both large, strong asteroids and small, weak ones provide regolith environments compatible with those inferred for the parent bodies of brecciated meteorites. But from volumetric calculations, we conclude that most brecciated meteorites formed on the surfaces of, and were recycled through the interiors of, parent bodies at least several tens of kilometers in diameter. The implications of our regolith model are consistent with properties inferred for asteroid regoliths from a variety of astronomical measurements of asteroids, although such data do not constrain regolith properties nearly as strongly as meteoritical evidence Our picture of substantial asteroidal regoliths produced predominantly by blanketing differs from earlier hypotheses that asteroidal regoliths might be thin or absent and that short surface exposure of asteroidal materials is due chiefly to erosion rather than blanketing. 相似文献
19.
Abstract— It has been known for some time that the volume of impact melt (Vm) relative to that of the transient cavity (Vtc) increases with the magnitude of the impact event. This paper investigates the influence that this phenomenon has on the nature of terrestrial impact craters. A model of impact melting is used to estimate the volume of melt produced during the impact of chondritic projectiles into granite targets at velocities of 15, 25, and 50 km S?1. The dimensions of transient cavities formed under the same impact conditions are calculated from current crater-scaling relationships, which are derived from dimensional analysis of data from cratering experiments. Observed melt volumes at terrestrial craters are collated from the literature and are paired with the transient-cavity diameters (Dtc) of their respective craters; these diameters were determined through an established empirical relationship. The model and observed melt volumes have very similar trends with increasing transient-cavity diameter. This Vm-Dtc relationship is then used to make predictions regarding the nature of the terrestrial cratering record. In particular, with increasing size of the impact event, the depth of melting approaches the depth of the transient cavity. As a consequence, the base of the cavity, which ultimately would appear as an uplifted central structure in a complex crater, will record shock stresses that will increase up to a maximum of partial melting. Examination of the terrestrial record indicates a general trend for higher recorded shock levels in central structures at larger diameters; impact structures in the 100-km size range record partially melted and vesiculated parautochthonous target rocks in their centers. In addition, as the depth of melting approaches a depth equivalent to that attained by the base of the transient cavity, the floor of the transient cavity will have progressively less strength, with the result that cavity modification and uplift will not produce topographic central peaks. Again, the observed terrestrial record is not inconsistent with this prediction, and we offer differential melt scaling as a possible mechanism for the transition from central topographic peaks to rings with increasing crater diameter. Among other implications is the likelihood that impact basins in the 1000-km size range on the early Earth would not have the same multi-ring form as observed on the moon. 相似文献
20.
Abstract— Keil and Wilson (1993) proposed that, during partial melting of some asteroidal meteorite parent bodies, explosive pyroclastic volcanism accelerated S-rich Fe, Ni-FeS cotectic partial melts into space. These authors argued that this process was responsible for the S-depletion of many of the magmas from which the magmatic iron meteorites formed. This process only requires the presence of a few hundred to thousand ppm of volatiles in asteroids < ～100 km in radius. If the precursor materials of these magmatic iron meteorite groups were similar in composition to unequilibrated ordinary chondrites, then the volatile contents of the latter may be a measure of the potential effectiveness of the process. Analysis of volatile contents of seven unequilibrated ordinary chondrite falls by dynamic high-temperature mass spectrometry revealed that thousands of ppm of indigeneous volatiles, mostly CO, Cl, Na and S, are released at temperatures near the Fe, Ni-FeS cotectic melting temperature of ～980 °C. If these volatiles are largely retained in the asteroidal parent bodies until onset of partial melting, S depletion of the residual melt might have been achieved by ejection of S-rich partial Fe, Ni-FeS melts by pyroclastic volcanism. 相似文献