共查询到20条相似文献，搜索用时 31 毫秒
1.
《Journal of African Earth Sciences》2005,41(1-2):25-39
Ag-ores occur in a specific zone of the Bou Azzer Co–As deposit in the Precambrian basement of the Anti-Atlas belt (Morocco), especially in highly microfractured quartz-depleted diorite. They formed after the main Co–As stage of mineralization, but both ore stages (Co–As and Ag-ore) appear linked to similar immiscible fluids: an hyper-saline Na–Ca brine (5.5–22 wt.%. eq. NaCl and 13.5–18.5 wt.% eq. CaCl2, with Na/Ca ranging from 0.4 to 1.2 during Ag-mineralization) occurring as L + V ± halite fluid inclusions and CH4–(N2) gas dominated fluids. Pressure–temperature estimates for the Ag-stage range from 40 to 80 MPa and 150 to 200 °C e.g. at a temperature slightly lower than that of the preceding Co–As stage (200–220 °C).Chlorinity, cation (Na/Ca ca. 2.2) and halogen ratios (Cl/Br from 300 to 360) are typical of deep basinal brines, especially of surface-evaporated brines that have exceeded halite saturation. The primary brines were modified by fluid–rock interaction during burial and migration through the basement. Ag-deposition was probably favoured by dilution and cooling due to the mixing of brines with less saline fluids. Similarities between the Ag-brines from Bou Azzer, Zgounder and Imiter suggest a regional scale circulation of basinal brines during extension probably later than the Triassic, during the early stages of rifting of the Atlantic. 相似文献
2.
The Wangfeng gold deposit is located in Western Tian Shan and the central section of the Central Asian Orogenic Belt (CAOB). The deposit is mainly hosted in Precambrian metamorphic rocks and Caledonian granites and is structurally controlled by the Shenglidaban ductile shear zone. The gold orebodies consist of gold-bearing quartz veins and altered mylonite. The mineralization can be divided into three stages: quartz–pyrite veins in the early stage, sulfide–quartz veins in the middle stage, and quartz–carbonate veins or veinlets in the late stage. Ore minerals and native gold mainly formed in the middle stage. Four types of fluid inclusions were identified based on petrography and laser Raman spectroscopy: CO2–H2O inclusions (C-type), pure CO2 inclusions (PC-type), NaCl–H2O inclusions (W-type), and daughter mineral-bearing inclusions (S-type). The early-stage quartz contains only primary CO2–H2O fluid inclusions with salinities of 1.62 to 8.03 wt.% NaCl equivalent, bulk densities of 0.73 to 0.89 g/cm3, and homogenization temperatures of 256 °C–390 °C. Vapor bubbles are composed of CO2. The middle-stage quartz contains all four types of fluid inclusions, of which the CO2–H2O and NaCl–H2O types yield homogenization temperatures of 210 °C–340 °C and 230 °C–300 °C, respectively. The CO2–H2O fluid inclusions have salinities of 0.83 to 9.59 wt.% NaCl equivalent and bulk densities of 0.77 to 0.95 g/cm3, with vapor bubbles composed of CO2, CH4, and N2. Fluid inclusions in the late-stage quartz are NaCl–H2O solution with low salinities (0.35–3.87 wt.% NaCl equivalent) and low homogenization temperatures (122 °C–214 °C). The coexistence of inclusions of these four types in middle-stage quartz suggests that fluid boiling occurred in the middle-stage mineralization. Trapping pressures estimated from CO2–H2O inclusions are 110–300 MPa and 90–250 MPa for the early and middle stages, respectively, suggesting that gold mineralization mainly occurred at depths of about 10 km. In general, the Wangfeng gold deposit originated from a metamorphic fluid system characterized by low salinity, low density, and enrichment of CO2. Depressurized fluid boiling caused gold precipitation. Given the regional geology, ore geology, fluid-inclusion features, and ore-forming age, the Wangfeng gold deposit can be classified as a hypozonal orogenic gold deposit. 相似文献
3.
The Shapinggou porphyry Mo deposit, one of the largest Mo deposits in Asia, is located in the Dabie Orogen, Central China. Hydrothermal alteration and mineralization at Shapinggou can be divided into four stages, i.e., stage 1 ore-barren quartz veins with intense silicification, followed by stage 2 quartz-molybdenite veins associated with potassic alteration, stage 3 quartz-polymetallic sulfide veins related to phyllic alteration, and stage 4 ore-barren quartz ± calcite ± pyrite veins with weak propylitization. Hydrothermal quartz mainly contains three types of fluid inclusions, namely, two-phase liquid-rich (type I), two- or three-phase gas-rich CO2-bearing (type II) and halite-bearing (type III) inclusions. The last two types of fluid inclusions are absent in stages 1 and 4. Type I inclusions in the silicic zone (stage 1) display homogenization temperatures of 340 to 550 °C, with salinities of 7.9–16.9 wt.% NaCl equivalent. Type II and coexisting type III inclusions in the potassic zone (stage 2), which hosts the main Mo orebodies, have homogenization temperatures of 240–440 °C and 240–450 °C, with salinities of 34.1–50.9 and 0.1–7.4 wt.% NaCl equivalent, respectively. Type II and coexisting type III inclusions in the phyllic zone (stage 3) display homogenization temperatures of 250–345 °C and 220–315 °C, with salinities of 0.2–6.5 and 32.9–39.3 wt.% NaCl equivalent, respectively. Type I inclusions in the propylitization zone (stage 4) display homogenization temperatures of 170 to 330 °C, with salinities lower than 6.5 wt.% NaCl equivalent. The abundant CO2-rich and coexisting halite-bearing fluid inclusion assemblages in the potassic and phyllic zones highlight the significance of intensive fluid boiling of a NaCl–CO2–H2O system in deep environments (up to 2.3 kbar) for giant porphyry Mo mineralization. Hydrogen and oxygen isotopic compositions indicate that ore-fluids were gradually evolved from magmatic to meteoric in origin. Sulfur and lead isotopes suggest that the ore-forming materials at Shapinggou are magmatic in origin. Re–Os dating of molybdenite gives a well-defined 187Re/187Os isochron with an age of 112.7 ± 1.8 Ma, suggesting a post-collisional setting. 相似文献
4.
The Baishan porphyry Mo deposit formed in the Middle Triassic in Eastern Tianshan, Xinjiang, northwestern China. Mo mineralization is associated with the Baishan monzogranite and granite porphyry stocks, mainly presenting as various types of hydrothermal veinlets in alerted wall rocks, with potassic, phyllic, propylitic, and fluorite alteration. The ore-forming process can be divided into four stages: stage I K-feldspar–quartz–pyrite veinlets, stage II quartz–molybdenite ± pyrite veinlets, stage III quartz–polymetallic sulfide veinlets and stage IV barren quartz–calcite veins. Four types of fluid inclusions (FIs) can be distinguished in the Baishan deposit, namely, liquid-rich two-phase (L-type), vapor-rich two-phase (V-type), solid-bearing multi-phase (S-type) and mono-phase vapor (M-type) inclusions, but only the stage I quartz contains all types of FIs. The stages II and III quartz have three types of FIs, with exception of M-type. In stage IV quartz minerals, only the L-type inclusions can be observed. The FIs in quartz of stages I, II, III and IV are mainly homogenized at temperatures of 271–468 °C, 239–349 °C, 201–331 °C and 134–201 °C, with salinities of 2.2–11.6 wt.% NaCl equiv., 1.1–10.2 wt.% NaCl equiv., 0.5–8.9 wt.% NaCl equiv. and 0.2–5.7 wt.% NaCl equiv., respectively. The ore-forming fluids of the Baishan deposit are characterized by high temperature, moderate salinity and relatively reduced condition, belonging to a H2O–NaCl ± CH4 ± CO2 system. Hydrogen and oxygen isotopic compositions of quartz indicate that the ore-forming fluids were gradually evolved from magmatic to meteoric in origin. Sulfur and lead isotopes suggest that the ore-forming materials came predominantly from a deep-seated magma source from the lower continental crust. The Mo mineralization in the Baishan deposit is estimated to have occurred at a depth of no less than 4.7 km, and the decrease in temperature and remarkable transition of the redox condition (from alkalinity to acidity) of ore-forming fluids were critical for the formation of the Baishan Mo deposit. 相似文献
5.
At San Roque in Patagonia's Rio Negro Province, Argentina, an In–Au–Cu–Zn–Pb–Ag mineralization (< 0.24 wt.% In, < 7 ppm Au, < 0.45 wt.% Cu, < 14.1 wt.% Zn, < 0.55 wt.% Pb, < 60 ppm Ag) is bound to lava, and volcaniclastics of Triassic through Jurassic age. The polymetallic sulfidic and non-sulfidic indium mineralization is attributed to the low-sulfidation (LS) to intermediate sulfidation (IS) epithermal type of mineralization. Its vein-type and stockwork mineralization developed at 39.2 bars under hydrostatic conditions, corresponding to a depth of 400 m below the water level of the paleoaquifer. In the redox-controlled hypogene mineralization, the temperature increased from 130 °C up to as much as 250 °C at depth, while the pH regime changed from slightly acidic near surface to more alkaline conditions around pH 8 at a depth of approximately 150 m. The monophase mineral associations composed of sphalerite, Ag–Bi-enriched and inclusion-free galena (< 1.7 wt.% Ag, < 3.7 wt.% Bi), chalcopyrite, pyrite, gold, silver, digenite, various In–Cu- and Pb–Zn–Ag “intermediate products”, wittichenite, roquesite, sakuraiite, dzhalindite, brochantite, antlerite, cerussite, and “manganomelane” in a quartz and muscovite-rich gangue have been subdivided into three different stages: (1) Stockwork mineralization of LS to IS epithermal type (hypogene), (2) quartz vein mineralization (hypogene), and (3) salar mineralization (supergene–hypogene).Salt–mud flats controlled the youngest mineralization with Mn, Li, Ca, Mg, V, Sr, Cu, Ag and In bound to oxides, hydroxides, sulfates and subordinate carbonates. The quartz vein mineralization is made up of oxides, hydroxides prevailing over sulfides and containing W, Fe, Au, As, Pb, In, and Cu. It formed at the passage from the vadose into the phreatic zones under oxidizing to slightly reducing conditions. The level marks the boiling level of the hydrothermal solutions involved in the mineralizing process. The hypogene stockwork mineralization is exclusively made up of sulfides containing Zn, Pb, Cu, In, Ag and Bi in the phreatic zones. It developed under reducing conditions. Indium is present at all levels within the volcanic rocks and has been derived from sphalerite rich in Cd (< 1.6 wt.% Cd), In (< 7.3 wt.% In) and Cu (< 7.2 wt.% Cu) while the Fe contents are moderate in sphalerite (< 6.8 wt.% Fe). Indium reached economic grade only through the segregation of a Cu–In–S phase in the “indium window” which is defined by a Cd content of sphalerite in the range 0.2–0.6 wt.% Cd. This concentration of In is controlled by the crystal morphology and the lattice parameters of the minerals involved. It is described as a two-stage process with interdiffusion processes in an Fe-enriched system (stage I) and zoned replacement in an Fe-poor system enriched in indium (stage II). Cu-bearing sphalerite decomposed into sphalerite poor in trace elements and into Cu–In-bearing sphalerite. Further indium concentration took place, when roquesite and sakuraiite decomposed along with an increase in oxygen pressure under hypogene and supergene conditions into dzhalindite. The physical–chemical conditions of the mineralogy and chemical changes in the system In–Cu–Zn–Cd observed in nature have been approximated based upon the results obtained during laboratory studies in material sciences that were focused on solar energy. 相似文献
6.
Porphyry systems are known to form in magmatic arc environment and commonly include porphyry Cu, epithermal Pb–Zn–Au–Ag, skarn polymetallic mineralization, etc. The systems are rarely reported in collisional zones, such as the Gangdese belt in southern Tibet where many postcollisional porphyry copper deposits occurred. In addition, other types of mineral systems are rarely present except porphyry copper mineralization in the Gangdese belt. In this study, we present Pb–Zn-bearing quartz veins at Luobuzhen in the western Gangdese belt. The Luobuzhen Pb–Zn veins cross-cut dacite of the Linzizong Group with zircon U–Pb age of 50.1 ± 0.2 Ma and monzogranite with zircon U–Pb age of 17.1 ± 0.1 Ma. Ore minerals include sphalerite, galena, chalcopyrite, and pyrite; gangue minerals are quartz with minor chlorite and sericite. Primary fluid inclusions of quartz are liquid-rich, aqueous, and two-phase inclusions. The homogenization temperatures of these primary inclusions are moderate to high (267–400 °C), and salinities range from 8.9 to 18.4 wt.% NaCl equiv. Quartz has δ18OSMOW values of 6.2–9.3‰, while sulfides have δ34SV-CDT values of −5.1‰ to 0.1‰, 206Pb/204Pb of 18.722–18.849, 207Pb/204Pb of 15.640–15.785, and 208Pb/204Pb of 39.068–39.560. These data suggest that magmatic fluids with contribution from meteoric water, magmatic sulfur, and lead derived from upper crust and metasomatized mantle by Indian continental materials would be critical for the Luobuzhen base metal mineralization.The Dongshibu area, located at ∼2 km east of the Luobuzhen, is characterized by high concentrations of Cu (up to 1450 ppm) and Mo (up to 130 ppm) of stream sediments, which is quite different from high concentrations in Pb, Zn, Ag, and Au shown in the Luobuzhen area. In addition, porphyry copper mineralization-related alteration and veins/veinlets occur in the Miocene monzogranite at Dongshibu. The monzogranite is characterized by high Sr/Y ratios, which are also shown on ore-forming intrusions in the Gangdese postcollisional porphyry copper deposits, and shows similar zircon Hf isotopes to the ore-related high Sr/Y intrusions from the Zhunuo porphyry copper deposit which is located ∼20 km northeast of the Luobuzhen-Dongshibu. A comprehensive analysis allows us to infer that the base metal veins at Luobuzhen are components of a porphyry Cu system with porphyry Cu mineralization likely present at Dongshibu and epithermal Au–Ag veins possibly occurring at Luobuzhen, which are indicative of the existence of porphyry copper systems in collisional zones. The potential porphyry Cu mineralization and epithermal Au–Ag veins should be targeted in future exploration at Luobuzhen-Dongshibu. 相似文献
7.
《Ore Geology Reviews》2010,37(4):333-349
Gold mineralization at Jonnagiri, Dharwar Craton, southern India, is hosted in laminated quartz veins within sheared granodiorite that occur with other rock units, typical of Archean greenstone–granite ensembles. The proximal alteration assemblage comprises of muscovite, plagioclase, and chlorite with minor biotite (and carbonate), which is distinctive of low- to mid-greenschist facies. The laminated quartz veins that constitute the inner alteration zone, contain muscovite, chlorite, albite and calcite. Using various calibrations, chlorite compositions in the inner and proximal zones yielded comparable temperature ranges of 263 to 323 °C and 268 to 324 °C, respectively. Gold occurs in the laminated quartz veins both as free-milling native metal and enclosed within sulfides. Fluid inclusion microthermometry and Raman spectroscopy in quartz veins within the sheared granodiorite in the proximal zone and laminated auriferous quartz veins in inner zone reveal the existence of a metamorphogenic aqueous–gaseous (H2O–CO2–CH4 + salt) fluid that underwent phase separation and gave rise to gaseous (CO2–CH4), low saline (~ 5 wt.% NaCl equiv.) aqueous fluids. Quartz veins within the mylonitized granodiorites and the laminated veins show broad similarity in fluid compositions and P–T regime. Although the estimated P–T range (1.39 to 2.57 kbar at 263 to 323 °C) compare well with the published P–T values of other orogenic gold deposits in general, considerable pressure fluctuation characterize gold mineralization at Jonnagiri. Factors such as fluid phase separation and fluid–rock interaction, along with a decrease in f(O2), were collectively responsible for gold precipitation, from an initial low-saline metamorphogenic fluid. Comparison of the Jonnagiri ore fluid with other lode gold deposits in the Dharwar Craton and major granitoid-hosted gold deposits in Australia and Canada confirms that fluids of low saline aqueous–carbonic composition with metamorphic parentage played the most dominant role in the formation of the Archean lode gold systems. 相似文献
8.
Numerous magnetite–apatite deposits occur in the Ningwu and Luzong sedimentary basins along the Middle and Lower Yangtze River, China. These deposits are located in the contact zone of (gabbro)-dioritic porphyries with surrounding volcanic or sedimentary rocks and are characterized by massive, vein and disseminated magnetite–apatite ± anhydrite mineralization associated with voluminous sodic–calcic alteration. Petrologic and microthermometric studies on multiphase inclusions in pre- to syn-mineralization pyroxene and garnet from the deposits at Meishan (Ningwu basin), Luohe and Nihe (both in Luzong basin) demonstrate that they represent extremely saline brines (~ 90 wt.% NaClequiv) that were trapped at temperatures of about 780 °C. Laser ablation ICP-MS analyses and Raman spectroscopic studies on the natural fluid inclusions and synthetic fluid inclusions manufactured at similar P–T conditions reveal that the brines are composed mainly of Na (13–24 wt.%), K (7–11 wt.%), Ca (~ 7 wt.%), Fe (~ 2 wt.%), Cl (19–47 wt.%) and variable amounts of SO4 (3–39 wt.%). Their Cl/Br, Na/K and Na/B ratios are markedly different from those of seawater evaporation brines and lie between those of magmatic fluids and sedimentary halite, suggesting a significant contribution from halite-bearing evaporites. High S/B and Ca/Na ratios in the fluid inclusions and heavy sulfur isotopic signatures of syn- to post-mineralization anhydrite (δ34SAnh = + 15.2 to + 16.9‰) and pyrite (δ34SPy = + 4.6‰ to + 12.1‰) further suggest a significant contribution from sedimentary anhydrite. These interpretations are in line with the presence of evaporite sequences in the lower parts of the sedimentary basins.The combined evidence thus suggests that the magnetite–apatite deposits along the Middle and Lower Yangtze River formed by fluids that exsolved from magmas that assimilated substantial amounts of Triassic evaporites during their ascent. Due to their Fe-oxide dominated mineralogy, their association with large-scale sodic–calcic alteration and their spatial and temporal associations with subvolcanic intrusions we interpret them as a special type of IOCG deposits that is characterized by unusually high contents of Na, Ca, Cl and SO4 in the ore-forming fluids. Evaporite assimilation apparently led to the production of large amounts of high-salinity brine and thus to an enhanced capacity to extract iron from the (gabbro)-dioritic intrusions and to concentrate it in the form of ore bodies. Hence, we believe that evaporite-bearing sedimentary basins are more prospective for magnetite–apatite deposits than evaporite-free basins. 相似文献
9.
The several-hundred-m-thick Miocene Upper Red Formation in northwestern Iran hosts stratiform and fault-controlled copper mineralization. Copper enrichment in the percent range occurs in dm-thick carbonaceous sandstone and shale units within the clastic redbed sequence and consists of fine-grained disseminated copper sulfides (chalcopyrite, bornite, chalcocite) and supergene alteration minerals (covellite, malachite and azurite). The copper mineralization formed after calcite cementation of the primary rock permeability. Copper sulfides occur mainly as replacement of diagenetic pyrite, which, in turn, replaced organic matter. Electron microprobe analysis on bornite, chalcocite and covellite identifies elevated silver contents in these minerals (up to 0.12, 0.72 and 1.21 wt%, respectively), whereas chalcopyrite and pyrite have only trace amounts of silver (<0.26 and 0.06 wt%, respectively). Microthermometric data on fluid inclusions in authigenic quartz and calcite indicate that the Cu mineralization is related to a diagenetic fluid of moderate-to low temperature (Th = 96–160 °C) but high salinity (25–38 wt% CaCl2 equiv.). The range of δ34S in pyrite is −41.9 to −16.4‰ (average −31.4‰), where framboidal pyrite shows the most negative values between −41.9 and −31.8‰, and fine-grained pyrite has relatively heavier δ34S values (−29.2 to −16.4‰), consistent with a bacteriogenic derivation of the sulfur. The Cu-sulfides (chalcopyrite, bornite and chalcocite) show slightly heavier values from −14.6 to −9.0‰, and their sulfur sources may be both the precursor pyrite-S and the bacterial reduction of sulfate-bearing basinal brines. Carbonates related to the ore stage show isotopically light values of δ13CV-PDB from −8.2 to −5.1‰ and δ18OV-PDB from −10.3 to −7.2‰, indicating a mixed source of oxidation of organic carbon (ca. −20‰) and HCO3− from seawater/porewater (ca. 0‰). The copper mineralization is mainly controlled by organic matter content and paleopermeability (intragranular space to large fracture patterns), enhanced by feldspar and calcite dissolution. The Cheshmeh-Konan deposit can be classified as a redbed-type sediment-hosted stratiform copper (SSC) deposit. 相似文献
10.
Crnac is an intermediate sulfidation Pb–Zn–Ag epithermal deposit located within the Vardar suture zone of the Central Balkan Peninsula. The epithermal Pb–Zn–Ag mineralization consists of (i) a series of steeply-dipping veins hosted within the Jurassic amphibolites, and (ii) overlying hydrothermal-explosive breccia with angular (level IV) or rounded fragments of listwanite (surface) cemented by epithermal mineralization. The mineralization is related to the Oligocene quartz latite dykes that crosscut the Crnac antiform. Quartz latite rocks predominantly display a shoshonitic character. The obtained 40Ar/39Ar age of fresh quartz latite is 28.9 ± 0.3 Ma. Fine-grained sericite from altered quartz latite is dated at 28.6 ± 0.5 Ma. Early, alteration related fluid inclusions within quartz latite show coexistence of high-density brine and a low-density vapor-saturated phase that homogenized at 280–405 °C. Phase separation occurs at a paleodepth of 0.6 to 0.9 km.Epithermal mineralization developed in three stages: (i) early pyrite–arsenopyrite–pyrrhotite–quartz–kaolinite; (ii) main sphalerite–galena–tetrahedrite–chalcopyrite and (iii) late carbonate–pyrite–arsenopyrite assemblage. The onset of mineral deposition within epithermal veins was initiated by boiling of Na–Cl ± K ± Ca ± Mg fluid at a paleodepth of 0.6 to 0.9 km. Coexisting vapor and liquid-rich inclusions display salinities and trapping temperatures of 4 wt.% NaCl equiv., 280–370 °C and 2–27 wt.% NaCl equiv., 230–375 °C, respectively. Boiling continued throughout the deposition of the sphalerite-galena-tetrahedrite-chalcopyrite assemblage. Late stage carbonate was deposited from diluted, non-boiling, low-temperature Na–Ca–Mg–Cl ± CO2 fluid (0.2 to 4.8 wt.% NaCl equiv., 115–280 °C).About 100–150 m higher in the system, precipitation of listwanite breccia cement began as a result of boiling Na–Cl ± Ca ± Mg ± K fluid of medium salinities (2.6 to 12.1 wt.% NaCl equiv.) at temperatures of 245–370 °C. Boiling and dilution of fluids continue throughout the precipitation of the main sphalerite-galena-tetrahedrite and late, mainly carbonate assemblage. Surface listwanite breccia contain quartz phenocrysts deposited from a homogeneous fluid with a medium salinity (8–10 wt.% NaCl equiv.) and high temperatures (Th = 295–315 °C), whereas the early and main stage of a surface listwanite breccia cement precipitated from a boiling fluid of decreasing salinity and temperature. Aqueous ± CO2, high salinity (16 to 18 wt.% NaCl equiv.), low temperature (120 °C), homogeneously trapped fluid that precipitated late stage carbonates, is most likely a remnant of boiled off fluid. The epithermal assemblage of the surface listwanites precipitated at a paleodepth of 0.4 to 0.6 km.The δ13C values of the late stage ankerite range from − 4.2 to 4.1‰, whereas δ18O range from 9.6 to 17.5‰. The calculated δ18O of fluid that precipitated carbonates within epithermal veins, and listwanite breccia cement range from 6.3 to 11.3‰, indicating a contribution of magmatic water.Deposition of all mineralization types was initiated by neutralization of primary acidic magmatic fluid by water-rock reactions that caused widespread propylitization and sericitization. Extensive and long-lasting boiling combined with dilution by meteoric water increased the pH towards the final stage of hydrothermal activity. 相似文献
11.
The Mangabeira deposit is the only known Brazilian tin mineralization with indium. It is hosted in the Paleo- to Mesoproterozoic Mangabeira within-plate granitic massif, which has geochemical characteristics of NYF fertile granites. The granitic massif is hosted in Archean to Paleoproterozoic metasedimentary rocks (Ticunzal formation), Paleoproterozoic peraluminous granites (Aurumina suite) and a granite–gneiss complex. The mineralized area comprises evolved Li-siderophyllite granite, topaz–albite granite, Li–F-rich mica greisens and a quartz–topaz rock, similar to topazite. Two types of greisens are recognized in the mineralized area: zinnwaldite greisen and Li-rich muscovite greisen, formed by metasomatism of topaz–albite granite and Li-siderophyllite granite, respectively. Cassiterite occurs in the quartz–topaz rock and in the greisens. Indium minerals, such as roquesite (CuInS2), yanomamite (InAsO4·2H2O) and dzhalindite (In(OH3)), and In-rich cassiterite, sphalerite, stannite group minerals and scorodite are more abundant in the quartz–topaz rock, and are also recognized in albitized biotite granite and in Li-rich muscovite greisen. The host rocks and mineralized zones were subsequently overprinted by the Brasiliano orogenic event.Primary widespread two-phase aqueous and rare coeval aqueous-carbonic fluid inclusions are preserved in quartz from the topaz–albite granite, in quartz and topaz from the quartz–topaz rock and in cassiterite from the Li-rich muscovite greisen. Eutectic temperatures are − 25 °C to − 23 °C, allowing modeling of the aqueous fluids in the system H2O–NaCl(–KCl). Rare three-phase H2O–NaCl fluid inclusions (45–50 wt.% NaCl equiv.) are restricted to the topaz–albite granite. Salinities and homogenization temperatures of the aqueous and aqueous-carbonic fluid inclusions decrease from the topaz–albite granite (15–20 wt.% NaCl equiv.; 400 °C–450 °C), to the quartz–topaz rock (10–15 wt.% NaCl equiv.; 250 °C–350 °C) and to the greisen (0–5 wt.% NaCl equiv.; 200 °C–250 °C). Secondary fluid inclusions have the same range of salinities as the primary fluid inclusions, and homogenize between 150 and 210 °C.The estimated equilibrium temperatures based on δ18O of quartz–mica pairs are 610–680 °C for the topaz–albite granite and 285–370 °C for the Li-rich muscovite greisens. These data are coherent with measured fluid inclusion homogenization temperatures. Temperatures estimated using arsenopyrite geothermometry yield crystallization temperatures of 490–530 °C for the quartz–topaz rock and 415–505 °C for the zinnwaldite greisens. The fluids in equilibrium with the topaz–albite granite have calculated δ18O and δD values of 5.6–7.5‰ and − 67 to − 58‰, respectively. Estimated δ18O and δD values are mainly 4.8–7.9‰ and − 60 to − 30‰, respectively, for the fluids in equilibrium with the quartz–topaz rock and zinnwaldite greisen; and 3.4–3.9‰ and − 25 to − 17‰, respectively, for the Li-rich muscovite greisen fluid. δ34S data on arsenopyrite from the quartz–topaz rock vary from − 1.74 to − 0.74‰, consistent with a magmatic origin for the sulfur. The integration of fluid inclusion with oxygen isotopic data allows for estimation of the minimum crystallization pressure at ca. 770 bar for the host topaz–albite granite, which is consistent with its evolved signature.Based on petrological, fluid inclusion and isotope data it is proposed that the greisens and related Mangabeira Sn–In mineralization had a similar hydrothermal genesis, which involved exsolution of F-rich, Sn–In-bearing magmatic fluids from the topaz–albite granite, early formation of the quartz–topaz rock and zinnwaldite greisen, progressive cooling and Li-rich muscovite greisen formation due to interaction with meteoric water. The quartz–topaz rock is considered to have formed in the magmatic-hydrothermal transition. The mineralizing saline and CO2-bearing fluids are interpreted to be of magmatic origin, based on the isotopic data and paragenesis, which has been documented as characteristic of the tin mineralization genetically related to Proterozoic within-plate granitic magmatism in the Goias Tin Province, Central Brazil. 相似文献
12.
The Tongshan copper deposit in Anhui Province is a typical mid-sized skarn and porphyry type deposit in the Anqing–Guichi district along the Middle–Lower Yangtze River Valley, eastern China. The Tongshan intrusion is closely related to this mineralization. The intrusion mainly comprises rocks that are quartz diorite porphyry, quartz monzonite porphyry, and granodiorite porphyry. Plagioclase in these rocks is mostly andesine (An = 31.0–42.9), along with minor oligoclase. Biotite is magnesium-rich [Mg/(Mg + Fe) = 0.52–0.67] and aluminum-poor (Al2O3 = 12.32–14.09 wt.%), and can be classified as magnesio-biotite. Hornblende is TiO2-poor (<1.96 wt.%) and magnesium-rich [Mg/(Mg + Fe) > 0.60], and is magnesio-hornblende or edenite. The SHRIMP zircon U–Pb age of the quartz monzonite porphyry is 145.1 ± 1.2 Ma, which corresponds to the middle Yanshanian period. Whole-rock geochemical results show that the rocks are silica-rich (SiO2 = 60.23–66.23 wt.%) and alkali-rich (K2O + Na2O = 4.97–8.72 wt.%), and low in calcium (CaO = 2.61–5.66 wt.%). Trace element results show enrichments in large ion lithophile element (e.g., K, Rb, and Ba) and depletions in some high field strength elements (e.g., Nb, Ta, P, and Ti). The total rare earth element (REE) content of the rocks is low (ΣREE < 200 μg/g), and they exhibit light REE enrichment [(La/Yb)N > 10] and small positive Eu anomalies (average δEu = 1.16). These mineralogical, geochronological, and geochemical results show that the intrusion has a mixed crust–mantle source. The Tongshan intrusion was formed by multiple emplacements of crustally contaminated basaltic magma generated by varying degrees of partial melting of enriched lithospheric mantle and lower crust. Hornblende thermobarometry yielded magmatic crystallization temperatures of 652–788 °C and an average crystallization pressure of 1.4 kbar, which corresponds to a depth of approx. 4.7 km. Biotite thermobarometry yielded similar temperatures and lower pressures of 735–775 °C and 0.6 kbar (depth 2.1 km), respectively. The parental magma had a high oxygen fugacity and was produced in a volcanic arc setting related to subduction of the paleo-Pacific plate. 相似文献
13.
The Shilu deposit is a world-class Fe–Co–Cu orebody located in the Changjiang area of the western part of Hainan Island, South China. The distribution of Fe, Co, and Cu orebodies is controlled by strata of the No. 6 Formation in the Shilu Group and the Beiyi synclinorium. Based on a petrological study of the host rocks and their alteration assemblages, and textural and structural features of the ores, four mineralization stages have been identified: (1) the sedimentary ore-forming period; (2) the metamorphic ore-forming period; (3) the hydrothermal mineralization comprising the skarn and quartz–sulfide stage; and (4) the supergene period. The fluid inclusions in sedimentary quartz and/or chert indicate low temperatures (ca. 160 °C) and low salinities from 0.7 to 3.1 wt.% NaCleq, which corresponds to densities of 0.77 to 0.93 g/cm3. CO2-bearing or carbonic inclusions have been interpreted to result from regional metamorphism. Homogenization temperatures of fluid inclusions for the skarn stage have a wide range from 148 °C to 497 °C and the salinities of the fluid inclusions range from 1.2 to 22.3 wt.% NaCleq, which corresponds to densities from 0.56 to 0.94 g/cm3. Fluid inclusions of the quartz–sulfide stage yield homogenization temperatures of 151–356 °C and salinities from 0.9 to 8.1 wt.% NaCleq, which equates to fluid densities from 0.63 to 0.96 g/cm3.Sulfur isotopic compositions indicate that sulfur of the sedimentary anhydrite and Co-bearing pyrite, and the quartz–sulfide stage, was derived from seawater sulfate and thermochemical sulfate reduction of dissolved anhydrite at temperatures of 200 °C and 300 °C, respectively. H and O isotopic compositions of the skarn and quartz–sulfide stage demonstrate that the ore-forming fluids were largely derived from magmatic water, with minor inputs from metamorphic or meteoric water. The Shilu iron ore deposit has an exhalative sedimentary origin, but has been overprinted by regional deformation and metamorphism. The Shilu Co–Cu deposit has a hydrothermal origin and is temporally and genetically associated with Indosinian granitoid rocks. 相似文献
14.
The giant Jianchaling gold deposit is located in the Shaanxi Province, China. The mineralization is hosted by WNW-trending faults in the Mianxian-Lueyang-Yangpingguan (MLY) area. The mineralization can be divided into three stages based on mineralogical assemblages and crosscutting relationships of mineralized quartz veins. These stages, from early to late, are characterized by the mineral assemblage of: (1) quartz – coarse-grained pyrite – pyrrhotite – pentlandite – dolomite; (2) quartz – pyrite – gold – sphalerite – galena – carbonate – arsenopyrite – fuchsite; and (3) dolomite – calcite – quartz – fine-grained pyrite – realgar – orpiment.Three types of fluid inclusions have been recognized in this study based on petrographic and microthermometric measurements, including pure CO2 and/or CH4 (PC-type), NaCl-H2O (W-type), and NaCl-CO2-H2O (C-type) fluid inclusions. These fluid inclusion types are present in quartz from the Stage 1 and 2 assemblages, whereas the Stage 3 quartz only contains W-type fluid inclusions. The Stage 2 assemblage is associated with the mineralization at the Jianchaling deposit. Fluid inclusions of Stage 1 quartz homogenize mainly between 250° and 360 °C, with salinities up to 15.6 wt.% NaCl equiv., whereas the Stage 3 dolomite with homogenization temperatures of 160° – 220 °C and salinities of 1.1–7.4 wt.% NaCl equiv. This indicates that the ore fluid system evolved from CO2-rich, probably metamorphic hydrothermal to CO2-poor, meteoric fluid. All three types of fluid inclusions can be observed in the Stage 2 quartz, suggesting that this heterogeneous association was trapped from a boiling fluid system. These inclusions homogenized at temperatures of 200°–250 °C and salinities of 1.2–12.4 wt.% NaCl equiv. The estimated trapping pressures of the fluid inclusions are between 117 and 354 MPa in Stage 1, suggesting an alternating lithostatic–hydrostatic fluid system, which was controlled by a fault-valve at the depth of ~ 12 km.Two fuchsite samples collected from the Stage 2 polymetallic-quartz veins yielded well-defined 40Ar/39Ar isotopic plateau ages of 197 ± 2 and 194 ± 2 Ma, and 39Ar/36Ar-40Ar/36Ar normal isochrones of 198 ± 2 and 199 ± 2 Ma. This indicates that the mineralization at Jianchaling is Early Jurassic (ca. 198 Ma) in age. We propose that Jianchaling is an orogenic gold deposit, and formed during continental collision related to the northward subduction of the Mian-Lue oceanic plate during the Early Jurassic. We also conclude that the beginning of the continental collision between the Yangtze and the North China Cratons took place around 200 Ma. 相似文献
15.
The Baoshan Cu-polymetallic deposit is a recently discovered skarn deposit in the northern Lesser Xing’an Range, NE China. The orebodies are mainly hosted in the contact zone between granitic intrusions and Lower Cambrian dolomitic crystalline limestones or skarns. We present here zircon U–Pb and molybdenite Re–Os age data, whole-rock geochemistry, and zircon Hf isotopic data to constrain the geodynamic mechanisms of igneous activity and metallogenesis within the Baoshan Cu–polymetallic deposit. LA–ICP–MS zircon U–Pb dating suggests that a hornblende–quartz monzonite and porphyritic biotite granite were emplaced at 252.45 ± 0.70 Ma and 251.10 ± 0.98 Ma, respectively. Molybdenite separated from ore-bearing quartz veins or skarn-type ores yields a weighted mean model age of 250.3 ± 3.4 Ma, which coincide with the emplacement of the igneous rocks. These data suggest that the Late Permian-Early Triassic magmatic and mineralization event led to the formation of the Baoshan Cu–polymetallic deposit. Granitic intrusions are closely associated with this mineralization and have high contents of SiO2 (60.90–68.98 wt.%), Al2O3 (15.15–16.98 wt.%) and K2O (2.77–4.17 wt.%), with A/CNK ratios of 0.86–0.96. These granites are classified as metaluminous and high-K calc-alkaline I-type granites, and are enriched in Rb, Th, U, and K, and depleted in Nb, Ta, P, and Ti. Moreover, Moreover, the hornblende–quartz monzonite and porphyritic biotite granite have geochemical characteristics similar to adakites and island arc calc-alkaline rocks, respectively. In situ zircon Hf isotope data on the hornblende–quartz monzonite samples show εHf(t) values from +0.1 to +3.1, and porphyritic biotite granite samples exhibit heterogeneous εHf(t) values from −5.4 to +1.1. The geochemical and isotopic data for the Baoshan intrusions indicate that the Late Permian–Early Triassic continental–continental collision caused over thickening and delamination of the lower crust. Partial melting of delaminated lower crust formed the primary adakitic magmas, which may have reacted with surrounding mantle peridotite during ascent. Hornblende–quartz monzonite was formed by the emplacement of the adakitic magmas, whereas the formation of the porphyritic biotite granite was caused by the mixing of adakitic magmas with ancient crustal materials during ascent. Moreover, ore-forming materials were typically derived from the adakitic magmas with high oxygen fugacity, which incorporated significant amounts of ore-forming elements. Based on the regional geological history and the new geochemical and isotopic data from intrusions, we suggest that diagenesis and mineralization of the Baoshan Cu–polymetallic deposit took place in a transitional tectonic setting from collisional orogeny to extension, after collision of the North China Plate and Songnen Block, during the latter stages of the Xingmeng orogeny. 相似文献
16.
The newly discovered Handagai skarn Fe–Cu deposit is located in the northern Great Xing'an Range of NE China and is hosted by the Ordovician Luohe Formation. The orebodies that form the deposit are generally concordant with the bedding within these sediments, and are spatially related to areas of skarn development. The Fe–Cu mineralization in this area records four stages of paragenesis, namely prograde skarn, retrograde skarn, quartz–sulfide, and quartz–carbonate stages. The Handagai deposit is a calcic skarn that is dominated by an andradite–diopside–epidote–actinolite assemblage. The mineralogy and geochemistry of the skarn indicate that it formed from a hydrothermal fluid that altered the carbonate units in this area to a garnet (And42–95Grs4–53) and pyroxene (Di71–78Hd22–29Jo0–2) bearing skarn. The epidote within the skarn has an epidote end-member composition, with the chlorite in the skarn dominantly Fe-rich, indicating that these minerals formed in an Fe-rich environment. The petrographic, microthermometric, and Raman spectroscopic analysis of fluid inclusions within garnet, epidote, actinolite, quartz, and calcite precipitated at different stages of formation of the Handagai deposit indicate that mineralization-related fluid inclusions are either liquid-rich two-phase H2O–NaCl (type I), gas-rich two-phase H2O–NaCl (type II), three-phase (liquid + vapor + solid) H2O–NaCl (type III), or CO2–H2O–NaCl inclusions (type IV). The early stages of mineralization are associated with all four types of inclusion, whereas the later stages of mineralization are only associated with type I and II inclusions. Inclusion homogenization temperatures vary between the four stages of mineralization (370 °C–530 °C and > 600 °C, 210 °C–290 °C, 190 °C–270 °C, and 150 °C–230 °C, from early to late, respectively), with salinities also varying between the earlier and later stages of mineralization (11–18 and > 45, 7–15, 6–9, and 3–7 wt.% NaCl equivalent (equiv.), respectively). The majority of the inclusions within the Handagai deposit have homogenization temperatures and salinities of 200 °C–350 °C and 4–14 wt.% NaCl equiv., respectively, indicating that this is a medium–high temperature and medium–low salinity type deposit. The fluid inclusions were trapped at pressures of 11 to 72 MPa, corresponding to depths of 0.4 to 2.9 km. The geology, mineralogy, geochemistry, and fluid inclusions microthermometry indicate that the Handagai deposit formed as a result of contact infiltration metasomatism, with the deposition of ore minerals resulting from a combination of factors that include boiling as a result of reduced pressure, cooling, and fluid mixing. 相似文献
17.
The Fuxing porphyry Cu deposit is a recently discovered deposit in Eastern Tianshan, Xinjiang, northwestern China. The Cu mineralization is associated with the Fuxing plagiogranite porphyry and monzogranite, mainly presenting as various types of hydrothermal veins or veinlets in alerted wall rocks, with potassic, chlorite, phyllic, and propylitic alteration developed. The ore-forming process can be divided into four stages: stage I barren quartz veins, stage II quartz–chalcopyrite–pyrite veins, stage III quartz–polymetallic sulfide veins and stage IV quartz–calcite veins. Four types of fluid inclusions (FIs) can be distinguished in the Fuxing deposit, including hypersline (H-type), vapor-rich two-phase (V-type), liquid-rich two-phase (L-type), and trace amounts of pure vapor inclusions (P-type), but only the stage I quartz contains all types of FIs. The stages II and III quartz have two types of FIs, with exception of H- and P-types. In stage IV quartz minerals, only the L-type inclusions can be observed. The FIs in quartz of stages I, II, III and IV are mainly homogenized at temperatures of 357–518 °C, 255–393 °C, 234–322 °C and 145–240 °C, with salinities of 1.9–11.6 wt.% NaCl equiv., 1.6–9.6 wt.% NaCl equiv., 1.4–7.7 wt.% NaCl equiv. and 0.9–3.7 wt.% NaCl equiv., respectively. The ore-forming fluids of the Fuxing deposit are characterized by high temperature, moderate salinity and relatively oxidized condition. Carbon, hydrogen and oxygen isotopic compositions of quartz indicate that the ore-forming fluids were gradually evolved from magmatic to meteoric in origin. Sulfur and lead isotopes suggest that the ore-forming materials were derived from a deep-seated magma source. The Cu mineralization in the Fuxing deposit occurred at a depth of ~ 1 km, and the changes of oxygen fugacity, decompression boiling, and local mixing with meteoric water were most likely critical for the formation of the Fuxing Cu deposit. 相似文献
18.
Most skarn deposits are closely related to granitoids that intruded into carbonate rocks. The Cihai (>100 Mt at 45% Fe) is a deposit with mineral assemblages and hydrothermal features similar to many other typical skarn deposits of the world. However, the iron orebodies of Cihai are mainly hosted within the diabase and not in contact with carbonate rocks. In addition, some magnetite grains exhibit unusual relatively high TiO2 content. These features are not consistent with the typical skarn iron deposit. Different hydrothermal and/or magmatic processes are being actively investigated for its origin. Because of a lack of systematic studies of geology, mineral compositions, fluid inclusions, and isotopes, the genetic type, ore genesis, and hydrothermal evolution of this deposit are still poorly understood and remain controversial.The skarn mineral assemblages are the alteration products of diabase. Three main paragenetic stages of skarn formation and ore deposition have been recognized based on petrographic observations, which show a prograde skarn stage (garnet-clinopyroxene-disseminated magnetite), a retrograde skarn stage (main iron ore stage, massive magnetite-amphibole-epidote ± ilvaite), and a quartz-sulfide stage (quartz-calcite-pyrite-pyrrhotite-cobaltite).Overall, the compositions of garnet, clinpyroxene, and amphibole are consistent with those of typical skarn Fe deposits worldwide. In the disseminated ores, some magnetite grains exhibit relatively high TiO2 content (>1 wt.%), which may be inherited from the diabase protoliths. Some distinct chemical zoning in magnetite grains were observed in this study, wherein cores are enriched in Ti, and magnetite rims show a pronounced depletion in Ti. The textural and compositional data of magnetite confirm that the Cihai Fe deposit is of hydrothermal origin, rather than associated with iron rich melts as previously suggested.Fluid inclusions study reveal that, the prograde skarn (garnet and pyroxene) formed from high temperature (520–600 °C), moderate- to high-salinity (8.1–23.1 wt.% NaCl equiv, and >46 wt.% NaCl equiv) fluids. Massive iron ore and retrograde skarn assemblages (amphibole-epidote ± ilvaite) formed under hydrostatic condition after the fracturing of early skarn. Fluids in this stage had lower temperature (220°–456 °C) and salinity (8.4–16.3 wt.% NaCl equiv). Fluid inclusions in quartz-sulfide stage quartz and calcite also record similar conditions, with temperature range from 128° to 367 °C and salinity range from 0.2 to 22.9 wt.% NaCl equiv. Oxygen and hydrogen isotopic data of garnet and quartz suggest that mixing and dilution of early magmatic fluids with external fluids (e.g., meteoric waters) caused a decrease in fluid temperature and salinity in the later stages of the skarn formation and massive iron precipitation. The δ18O values of magnetite from iron ores vary between 4.1 and 8.5‰, which are similar to values reported in other skarn Fe deposits. Such values are distinct from those of other iron ore deposits such as Kiruna-type and magmatic Fe-Ti-V deposits worldwide. Taken together, these geologic, geochemical, and isotopic data confirm that Cihai is a diabase-hosted skarn deposit related to the granitoids at depth. 相似文献
19.
The quartz-pebble conglomerate (QPC)-hosted detrital uranium mineralization is unique in character in terms of their restricted distribution before 2.2 Ga atmosphere during pre-Great Oxidation Event (pre-GOE). Such QPC paleoplacer deposits over the world are good targets for moderate to high tonnage and low grade uranium deposits and more importantly for their gold content. The Mahagiri Quartzite, dated c. 3.02 Ga for their youngest detrital zircon population, is developed unconformably over the Mesoarchean Singhbhum Granite (3.44 Ga to 3.1 Ga). The Mahagiri Quartzite includes a conglomerate-pebbly sandstone dominated subaerial alluvial fan to coastal braided plain sequence in the lower parts and shallow marine mature quartz arenite in the upper parts. The alluvial fan-braided plain deposits in the lower parts host a number of pyritiferous and uraniferous conglomerate and pebbly sandstone beds. The uraninite grains are rounded to subrounded in outline suggesting mechanical transport and detrital origin. Together with detrital pyrite and uraninite constitute the example of > 3.0 Ga paleoplacer closely comparable to the Witwatersrand Au–U deposits. EPMA and SEM-EDS studies suggest that the uraninite grains are rich in Th (> 4 wt.%), S and REE-Y. Chemical formula calculations from EPMA analyses suggest uraninite grains belong to two populations with different oxidation states as revealed from Y/REE and cation U4 +: U6 + [apfu] ratios. The U contents of the detrital uraninite grains from Mahagiri are significantly lower than that of the ideal stoichiometric composition of UO2. This is mainly due to higher amount of heterovalent cationic substitution by Th, REE, Y, Pb, and Ca in Mahagiri QPC uraninite structures, and partial alteration and metamictization of uraninites. Alteration due to metamictization resulted in elevated concentration of Si, Al, P, and Ca in more altered and metamict uraninite grains. The REE pattern is typically flat with comparable LREE–HREE concentration. The high Th content flat REE-pattern suggests that the uraninitere presents high temperature phases (> 350 °C) and are magmatic in origin. The Mahagiri detrital uraninite grains suggest existence of highly felsic and K-rich (richer than TTG) granodiorite–granite–monzogranite suites (GGM) of rocks older than 3.1 Ga in the Singhbhum craton. 相似文献
20.
《Journal of African Earth Sciences》2008,50(2-4):204-214
The Tamlalt–Menhouhou gold deposit belongs to the Neoproterozoic–Palaeozoic Tamlalt inlier located in the Eastern High-Atlas (Morocco). It occurs in altered Upper Neoproterozoic bimodal volcanic and volcano-sedimentary units outcropping in the Tamlalt–Menhouhou area. Gold mineralization has been identified in quartz veins related to shear-zones associated with a strong quartz-phyllic-argillic alteration. Visible free gold is related to goethite–malachite–barite boxworks in quartz veins. The other alteration minerals accompanying gold mineralization are mainly carbonates, chlorite, hematite, albite and pyrite whose relative proportion defines three alteration types. 40Ar/39Ar geochronology performed on phengite grains from phyllic alteration and the auriferous quartz veins, yields plateau ages ranging from 300 ± 5 Ma to 284 ± 12 Ma with a weighted mean age of 293 ± 7 Ma. This identifies a Late Variscan age for the Tamlalt–Menhouhou “shear zones-related” gold deposit and emphasizes the consequences of the Variscan orogeny for gold mineralization in the High-Atlas and Anti-Atlas Neoproterozoic inliers. 相似文献