共查询到20条相似文献，搜索用时 15 毫秒
1.
In this paper, an approach is presented to analyze the stability risk of rock slopes based on a new rating system. Three factors are used to estimate the risk level of rock slopes: (1) failure probability, (2) element at risk rating, and (3) vulnerability rating. Element at risk and vulnerability ratings are both given a range from 0 to 10, and the probability of failure is varied between 0 and 1, so the risk rating ranges between 0 and 100. This risk rating can be used to determine both the quantitative and qualitative risk levels of slopes at the same time. The method is tested on the western sector of the slopes facing Songun copper plant phase III, Iran, to clarify its procedures and assess its validity. Deterministic kinematic analyses showed that the slope has a potential for circular failure. Risk assessments revealed that the risk levels of the slope in both static and pseudo-static conditions are “very low” and “high,” respectively.
相似文献2.
In this paper, an approach is presented to analyze the stability risk of rock slopes based on a new rating system. Three factors are used to estimate the risk level of rock slopes: (1) failure probability, (2) element at risk rating, and (3) vulnerability rating. Element at risk and vulnerability ratings are both given a range from 0 to 10, and the probability of failure is varied between 0 and 1, so the risk rating ranges between 0 and 100. This risk rating can be used to determine both the quantitative and qualitative risk levels of slopes at the same time. The method is tested on the western sector of the slopes facing Songun copper plant phase III, Iran, to clarify its procedures and assess its validity. Deterministic kinematic analyses showed that the slope has a potential for circular failure. Risk assessments revealed that the risk levels of the slope in both static and pseudo-static conditions are “very low” and “high,” respectively. 相似文献
3.
Catchment ditches along highways are designed to contain hazardous rock falls from cut slopes. RocFall, a rock fall simulation software, was used to evaluate the maximum roll-out distances of rock falls in order to determine rock fall catchment ditch dimensions for Ohio's cut slopes. Based on stratigraphy, cut slopes in Ohio were classified into five types. The parameters required for simulation process included friction angle between rock fall and slope face, coefficient of normal and tangential restitution, slope roughness and average weight of rock falls. A total of 400 simulations were performed for various slope heights, slope angles and catchment ditch slopes. The results are useful in designing catchment ditch for Ohio and neighbouring states where the stratigraphy consists of sub-horizontal, inter-layered hard and soft rock units. The widely used guidelines developed by the Oregon Department of Transportation do not work well for Ohio's stratigraphy. 相似文献
4.
Renato Macciotta C. Derek Martin David M. Cruden Michael Hendry Tom Edwards 《Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards》2017,11(3):272-284
Rock falls represent a large percentage of landslide-related hazards reported by Canadian railways in mountainous terrain. A 54.7?km-long section of railway through the Canadian Cordillera is examined that experiences, on average, 18 rock falls each year. An approach for rock fall hazard management is developed based on quantified risk. The approach focuses on defining railway operation procedures (freight train operations and track maintenance) that comply with quantified risks. Weather-based criteria that define periods when rock falls are more likely to occur along the study area are examined. These criteria are used herein to reduce exposure to rock falls and reduce their consequences. Several freight train operation strategies are proposed that comply with a tolerable level of risk adopted in this study for illustrative purposes. The approach provides a simple, flexible and practical strategy for railway operations that can be regularly adopted by the operators, and that is based on a more comprehensive assessment of quantified risk. 相似文献
5.
Over the last decade, terrestrial laser scanning and digital terrestrial photogrammetry techniques have been increasingly used in the geometrical characterization of rock slopes. These techniques provide innovative remote sensing tools which overcome the frequent problem of rock slope inaccessibility. Comprehensive datasets characterizing the structural geological setting and geometry of the slopes can be obtained. The derived information is very useful in rock slope investigations and finds application in a wide variety of geotechnical and mine operations. In this research an integrated remote sensing – GIS approach is proposed for the deterministic kinematic characterization of the Lorano open pit in the Apuan Alps of Italy. Based on the results of geomatic and engineering geological surveys, additional geomechanical analysis using a 3D finite difference method will be presented in order to provide a better understanding of the role of stress-induced damage on slope performance. 相似文献
6.
影响岩堆稳定的定性因素难以在极限平衡、数值分析中全面反映和定量表述。数量化理论可通过定性指标定量化,充分考虑定性指标的影响。基于数量化理论,提出岩堆稳定性评价模型。根据岩堆组成物质及内部颗粒接触情况进行结构分类;基于主因素分析,采用岩石单轴饱和抗压强度（分为四级）、岩堆结构（分为四级）、地形坡度（分为三级）及地下水发育情况（分为二级）4个评价指标建立了岩堆稳定性评价模型。模型在云南水富-麻柳湾高速公路中的应用成果表明:影响岩堆稳定性的主要因素是岩堆结构、岩石强度和地下水。 相似文献
7.
综合黔西地区层状岩质开挖边坡研究成果发现:岩体结构特征是分析评价层状边坡变形失稳模式、机制和稳定性的重要基础。因此,结合该地区层状边坡地质条件的差异性,针对性地划分岩体结构类型对边坡的分析评价尤为重要。考虑地层岩性组合、地质构造、软弱夹层（结构面）因素,系统地将边坡岩体结构类型分为4个大类（近水平-缓倾边坡岩体,倾斜层状边坡岩体,陡倾、直立、倒转层状岩体,地质构造作用强烈或含有溶蚀洞穴、沟壑的边坡岩体）和10个亚类,并针对相应类型的边坡进行工程地质综合评价,分别阐述了失稳模式和机制。以边坡岩体结构类型为基础,甄选影响开挖边坡稳定性的6个定性指标和6个定量指标;对指标组合赋权,用未确知测度理论对边坡进行稳定性预测评价,建立了“岩体结构-指标组合赋权-未确知测度理论”的新评价体系。实例预测结果表明预测结果与实际情况具有较好的一致性,说明该方法是一种可靠性高、科学合理的稳定性预测新方法,可在相关工程领域中应用推广。 相似文献
8.
北京山区地质复杂,工程频繁,边坡灾害发育以崩塌和滑坡为主.边坡灾害以岩质边坡和人工边坡为主,破坏模式为剥落、落石、崩塌和滑坡.从地质构造、地层岩性,气候条件和人类活动4个方面分析边坡灾害的影响因素,提出对应的防范措施. 相似文献
9.
Murat Yilmaz Altay Ertin Selman Er Atiye Tugrul 《Journal of the Geological Society of India》2018,91(2):232-238
The key question regarding steep rock slopes along rock quarries is their stability because a rock slope failure can have critical results. In this study, the aim is to investigate the areas with potential risk for jointed karstic limestones in a rock quarry. First, to determine rock mass properties, scan-line surveys were performed, and the major orientations of discontinuities were analyzed using stereographic projection. Then, the physicomechanical properties of the slope-forming rock were determined in the laboratory, and geomechanical properties of the rock mass were determined using an empirical failure criterion. Finally, the quarry slope stability was assessed in accordance with numerical modelling. According to the results obtained, the numerical modelling of steep rock slopes can be efficiently evaluated by using finite element method. Beside this, the presence of joints intersecting the main discontinuity sets, the filling materials of discontinuities resulting from weathering of limestone and surface deposits, surcharge load due to mine waste dumped on the slopes and excavation blasting during construction of quarry area play a key role when modelling the steep rock slopes by using finite element method. 相似文献
10.
含软弱夹层岩质边坡在自然环境和工程实践中都比较常见，稳定性差，边坡失稳产生了大量的滑坡灾害，造成大量人员伤亡和经济损失。因此，含软弱夹层岩质边坡稳定性研究一直是工程地质和岩土工程领域的研究重点之一。在收集整理国内外相关资料的基础上，从自重工况、开挖工况、暴雨和蓄水工况、地震工况方面总结了目前含软弱夹层岩质边坡稳定性的研究现状及进展，取得如下主要认识:(1)软弱夹层对岩质边坡稳定性有显著不利影响，含软弱夹层岩质边坡的稳定性比均质岩质边坡、不含软弱夹层的层状岩质边坡都差；(2)含软弱夹层岩质边坡的稳定性系数、变形特征和破坏模式与软弱夹层的含水状态、抗剪强度、倾角、厚度、间距、层数和边坡坡度有关；(3)开挖容易诱发坡体沿软弱夹层滑坡，含软弱夹层岩质边坡开挖后需要及时支护；(4)爆破层裂效应改变了软弱夹层与围岩的接触状态，减小了它们之间的凝聚力和摩擦力，导致边坡稳定性降低；(5)暴雨和蓄水都不利于含软弱夹层岩质边坡稳定；(6)岩质边坡地震动力响应和变形破坏特征受软弱夹层参数(厚度、倾角、含水状态)、地震波特性(地震波的类型、幅值、频率、激振方向)和边坡结构(顺层或反倾)共同影响；(7)在软弱夹层对水平向动力响应的放大或减弱作用及厚层软弱夹层的消能减震作用方面仍然存在不同观点。在此基础上，分析了研究方法的优缺点，指出当前含软弱夹层岩质边坡稳定性研究存在的问题。最后，针对该领域的研究现状，提出了未来的研究重点和方向，主要包括:含多层软弱夹层岩质边坡的渐进性变形破坏过程和稳定性；全面深入研究单因素作用(开挖卸荷、爆破、地震、暴雨、库水位变化、地下水等)对含软弱夹层岩质边坡稳定性的影响机制；多因素耦合作用下含软弱夹层岩质边坡稳定性；支挡结构体系对含多层软弱夹层高陡岩质边坡的加固机制。 相似文献
11.
A GIS-implemented, deterministic approach for the automated spatial evaluation of geometrical and kinematical properties of
rock slope terrains is presented. Based on spatially distributed directional information on planar geological fabrics and
DEM-derived topographic attribute data, the internal geometry of rock slopes can be characterized on a grid cell basis. For
such computations, different approaches for the analysis and regionalization of available structural directional information
applicable in specific tectonic settings are demonstrated and implemented in a GIS environment. Simple kinematical testing
procedures based on feasibility criteria can be conducted on a pixel basis to determine which failure mechanisms are likely
to occur at particular terrain locations. In combination with hydraulic and strength data on geological discontinuities, scenario-based
rock slope stability evaluations can be performed. For conceptual investigations on rock slope failure processes, a GIS-based
specification tool for a 2-D distinct element code (UDEC) was designed to operate with the GIS-encoded spatially distributed
rock slope data. The concepts of the proposed methodology for rock slope hazard assessments are demonstrated at three different
test sites in Germany. 相似文献
12.
反倾岩质边坡悬臂梁极限平衡模型的改进 总被引：4，自引：1，他引：3
反倾岩质边坡稳定性分析一直以来都是边坡稳定性分析中的难点,有很多悬而未决的问题。极限平衡分析方法仍然是目前最为常用的一种方法,也是相对比较成熟的一种方法。在Adhikary和Dyshin悬臂梁弯曲极限平衡分析模型的基础上,经过分析推导,对其折裂面形式、层间凝聚力的影响和各层岩体重度等方面问题进行了修正,得到了改进的悬臂梁极限平衡模型,提出了以各层位剩余不平衡力作为分析反倾边坡稳定性标准的新方法,并对边坡稳定性各影响因素进行了分析研究,得出的结论和规律更符合工程实际,对该类边坡的设计施工具有指导意义。 相似文献
13.
Mehdi Amini Abbas Majdi Mohammad Amin Veshadi 《Rock Mechanics and Rock Engineering》2012,45(4):519-532
Block-flexure is the most common type of toppling failure in rock slopes. In this case, some rock blocks fail due to tensile bending stresses and some overturn under their own weights. In this paper, first, a literature review of toppling failures is summarized. Then, a theoretical model is proposed for rock slopes with a potential for block-flexure toppling instability. Next, a new analytical approach is presented for the stability analysis of such slopes. Finally, a special computer code is developed for a quick stability assessment of the failures based on the proposed method. This code receives the rock slope parameters from the user as the input data and predicts its stability, along with the corresponding factor of safety against the failure, as the output. In addition, two case studies are used for practical verification of the proposed approach and the corresponding computer code as well. 相似文献
14.
System effects should be considered in the probabilistic analysis of a layered soil slope due to the potential existence of multiple failure modes. This paper presents a system reliability analysis approach for layered soil slopes based on multivariate adaptive regression splines (MARS) and Monte Carlo simulation (MCS). The proposed approach is achieved in a two-phase process. First, MARS is constructed based on a group of training samples that are generated by Latin hypercube sampling (LHS). MARS is validated by a specific number of testing samples which are randomly generated per the underlying distributions. Second, the established MARS is integrated with MCS to estimate the system failure probability of slopes. Two types of multi-layered soil slopes (cohesive slope and c–φ slope) are examined to assess the capability and validity of the proposed approach. Each type of slope includes two examples with different statistics and system failure probability levels. The proposed approach can provide an accurate estimation of the system failure probability of a soil slope. In addition, the proposed approach is more accurate than the quadratic response surface method (QRSM) and the second-order stochastic response surface method (SRSM) for slopes with highly nonlinear limit state functions (LSFs). The results show that the proposed MARS-based MCS is a favorable and useful tool for the system reliability analysis of soil slopes. 相似文献
15.
汶川地震极重灾区地质背景及次生斜坡灾害空间发育规律 总被引：22，自引：4，他引：18
512汶川大地震造成大量的次生斜坡灾害,本次研究区域为汶川大地震的11个重灾区,包括汶川、北川、青川、安县、平武、茂县、江油、彭州、什邡、绵竹、理县等市县。通过对重灾区航片、卫片、雷达图像的解译研究发现,重灾区次生斜坡灾害的主要灾种表现为崩塌、滑坡以及崩塌、滑坡高速运动解体形成的碎屑流（个别地方由于水的参与表现为泥石流）以及它们堵江形成的堰塞湖。研究发现地震次生斜坡灾害的发育具有明显的丛集性规律。从区域上看,次生斜坡灾害明显呈带状,沿龙门山断裂带展布,并主要受北川映秀断裂控制。各灾种的发育在不同地段发育的规模、频率差别较大。以灾害分布面积来排序,汶川县灾害面积最大,为131.55km2,其次为北川县,为45.57km2,其余9个县（市）灾害面积相差不大,均介于6~17km2,其中理县灾害面积最小,为6.25km2。各灾种的发育在不同地段发育的规模、频率差别较大。青川县、平武县灾种主要为滑坡,汶川县、茂县、安县、理县灾种主要表现崩塌转化的碎屑流,北川的主要灾种则为碎屑流,其次为滑坡,什邡、彭州、绵竹、江油等地主要灾种为崩塌。
灾种发育的这种地域性差别主要受控于地层岩性,除此而外,还与构造特征、地形地貌等因素紧密相关。研究表明:岩性对灾害种类的展布有决定性控制作用。统计发现,岩性越坚硬,崩塌、碎屑流发育率越高,滑坡则在软岩地区、较软岩地区和较坚硬区发育率最高,泥石流则在软岩地区最为发育。地形地貌对次生斜坡灾害的发育有重要影响,统计表明,崩塌、碎屑流以及泥石流在1200～2000m坡段范围内发育率最高,其次为800～1200m坡段;而滑坡则在800～1200m坡段范围发育率最高。对坡度而言,除11~20坡度范围外,崩塌和碎屑流的发育率总体具有随坡度增高而增大的特点;而滑坡和泥石流的发育率呈现典型的单峰特征,在1~20范围内发育率最大。坡向对地震次生斜坡灾害的发育影响不明显。
地震次生斜坡灾害的发育规律表明,地震斜坡灾害的发生主要受控于活动构造本身,并沿活动构造呈带状展布,同时受场地条件如岩性、地形地貌等因素的强烈控制。 相似文献
16.
17.
The occurrence of foliated rock masses is common in mining environment. Methods employing continuum approximation in describing the deformation of such rock masses possess a clear advantage over methods where each rock layer and each inter‐layer interface (joint) is explicitly modelled. In devising such a continuum model it is imperative that moment (couple) stresses and internal rotations associated with the bending of the rock layers be properly incorporated in the model formulation. Such an approach will lead to a Cosserat‐type theory. In the present model, the behaviour of the intact rock layer is assumed to be linearly elastic and the joints are assumed to be elastic–perfectly plastic. Condition of slip at the interfaces are determined by a Mohr–Coulomb criterion with tension cut off at zero normal stress. The theory is valid for large deformations. The model is incorporated into the finite element program AFENA and validated against an analytical solution of elementary buckling problems of a layered medium under gravity loading. A design chart suitable for assessing the stability of slopes in foliated rock masses against flexural buckling failure has been developed. The design chart is easy to use and provides a quick estimate of critical loading factors for slopes in foliated rock masses. It is shown that the model based on Euler's buckling theory as proposed by Cavers (Rock Mechanics and Rock Engineering 1981; 14 :87–104) substantially overestimates the critical heights for a vertical slope and underestimates the same for sub‐vertical slopes. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
18.
Rockfall susceptibility has been analysed in mountain cliffs of the Cantabrian Range, North Spain. The main aim of this analysis has been to build a predictive model of rockfall activity from a low number of environmental and geological variables. The rockfall activity has been quantified in a GIS. The cartographic information used shows the spatial distribution of all the recent talus screes as well as their associated source areas in the rock-slopes. The area relation At/Ar (recent talus scree polygon/source basins) in the rock slopes has been used as the rockfall activity indicator. This relation has been validated in 50 pilot rock-slopes and compared with the relation number of recent rock fragments/source basin, obtained from field work. The environmental factors causing rockfall depend on the rock slope situation, and these are: altitude and sun radiation on the rock cliff. The geological factors considered are: lithology, relative position of the main discontinuities with respect to the topographic surface and two morphologic parameters: the roughness and slope gradient. A logistic regression analysis has been applied to a population of 442 limestone and quartzite rock cliffs. The dependent variable is the rockfall activity indicator, which allows the definition of two classes of rock cliff units: low and high activity. The independent variables are altitude, sun radiation (equinox radiation, summer solstice radiation, winter solstice radiation), slope roughness, slope gradient,anisotropy and lithology. Results suggest that it is possible tobuild a valid cartographic predictive model for rockfall activity in mountain rock cliffs from a limited number of easily obtainable variables. The method is especially applicable in massive rock slopes or in regions with uniform rock mass characteristics. 相似文献
19.
次生倾倒破坏是层状反倾岩质边坡的一种主要破坏模式,极限平衡理论是分析倾倒破坏的常用方法,研究反倾节理岩质边坡次生倾倒破坏机理对边坡工程众多的西南山区基础设施建设具有重要的工程指导意义。在Goodman和Bray块体倾倒破坏极限平衡分析方法的基础上,建立了考虑地下水压力、节理连通率、岩体黏聚力等影响因素的反倾岩质边坡在坡后土体推力作用下的次生倾倒地质力学模型,提出了坡后土体推力作用下的反倾节理岩质边坡次生倾倒破坏的解析分析方法,推导出了边坡各岩层下推力的解析表达式,提出了边坡倾倒破坏的综合安全系数,并编写了对应的matlab计算程序,为该类边坡的设计和加固提供了理论依据。通过算例分析表明,与单纯岩质边坡块体倾倒破坏相比,该类边坡次生倾倒破坏形式的特点是破坏基准面以上岩层自上而下依次分为滑移区、倾倒区和稳定区3个部分;地下水压力、节理连通率、底裂面岩体黏聚力对各岩层的破坏形式、稳定安全系数大小都具有明显影响,尤其是在坡体中下部及坡脚部分最为敏感;而各岩层稳定安全系数最小的区域集中于边坡中上部。 相似文献
20.
地质灾害危险性评价是防灾减灾工作的重要依据。本文以汶川县城周边64 km2为例,应用遥感信息提取技术与GIS空间分析方法,根据IKONOS遥感图像和地形图及野外调查资料,提取了崩塌和滑坡易发性评价因子,采用信息量法确定了因子分值,计算了崩塌和滑坡易发性,并分别提出崩塌和滑坡的危险性计算方法,形成了汶川地区崩塌和滑坡危险性分区图。研究结果表明:新的崩塌和滑坡危险性评价方法能够反映区内地质灾害危险程度,该方法可行,结果合理,这为中、大比例尺区域范围内地质灾害危险性研究提供了有益的思路。 相似文献