共查询到20条相似文献，搜索用时 31 毫秒
1.
A. George Mourad 《Marine Geodesy》2013,36(4):293-313
Abstract Geographic Information Systems (GIS) have been developed during the last decade. Their land‐based applications range from land information management, urban planning, and environmental research to engineering design and management in the utility and oil industries, geological subsurface analysis, and others. However, applications of GIS in the marine environment are still in the initial stages. This may be due to, among other things, the large marine data sets, the demands of 3D data processing, and the difficulty of ocean data acquisition. This article presents the result of the development of an integrated Marine Geographic Information System (MGIS) for the exploration and development of the Exclusive Economic Zone (EEZ) in the U.S. Pacific Islands region by the Pacific Mapping Center, University of Hawaii. Features such as spatial marine data processing, integration of GIS and mapping systems, 3D data structures, and simulation and animation of marine operations are developed and applied in this system. Since MGIS applications in EEZ are related to many disciplines in marine sciences and engineering, an operational MGIS should be an integrated system in which both basic GIS and marine application systems are combined into a single geo‐referenced system, In addition to other applications, this MGIS has been used: (1) to select a potential deep‐water research site off the island of Hawaii for the State of Hawaii Department of Business, Economic, and Development (DBED); (2) to generate a three‐dimensional database and use it for the navigation and simulation of underwater operations of an underwater research vehicle; and (3) to produce two 2° × 2° mosaic sheets of sonar images, which meet the USGS standard for a sonar image atlas. 相似文献
2.
3.
Variability of suspended particulate matter in the Bohai Sea from the geostationary Ocean Color Imager (GOCI) 总被引：2，自引：0，他引：2
Kevin Ruddick Quinten Vanhellemont Jing Yan Griet Neukermans Guomei Wei Shaoling Shang 《Ocean Science Journal》2012,47(3):331-345
This study assesses the performance of the Geostationary Ocean Imager (GOCI) for mapping of suspended particulate matter in the Bohai Sea, a turbid water region. GOCI imagery for remote sensing reflectance and Total Suspended Solids (TSS) is analysed in detail for two days in June 2011 (8 images per day). Both instantaneous and daily composite maps are considered and a comparison is made with corresponding reflectance and TSS products from MODIS-AQUA. Results show TSS distributions corresponding to previous studies of the region. The advantage of the higher acquisition frequency (8 images/day instead of 1) offered by GOCI is clearly demonstrated in the daily composite which is more complete during this period of scattered but moving clouds. Consideration of temporal variation over the day indicates low natural variability but some artificial variability from processing errors ?? this analysis provides a first indication of how the higher frequency of data from geostationary ocean colour could lead to improved data quality control via temporal coherency outlier detection. While there is room for improvement on the GOCI calibration, atmospheric correction and retrieval algorithms, the current study suggests that the GOCI data can already be used now to study qualitatively sediment dynamics except in the extremely turbid waters which are masked out of the current dataset. In a wider context, it is considered that the technical challenges of geostationary ocean colour have been met by the GOCI concept, and, notwithstanding potential improvements on the concept and data processing methods, it is recommended that this mission serve as a model for future geostationary ocean colour sensors over Europe/Africa and the Americas. 相似文献
4.
5.
User expectations for multibeam echo sounders backscatter strength data-looking back into the future
Vanessa Lucieer Marc Roche Koen Degrendele Mashkoor Malik Margaret Dolan Geoffroy Lamarche 《Marine Geophysical Researches》2018,39(1-2):23-40
With the ability of multibeam echo sounders (MBES) to measure backscatter strength (BS) as a function of true angle of insonification across the seafloor, came a new recognition of the potential of backscatter measurements to remotely characterize the properties of the seafloor. Advances in transducer design, digital electronics, signal processing capabilities, navigation, and graphic display devices, have improved the resolution and particularly the dynamic range available to sonar and processing software manufacturers. Alongside these improvements the expectations of what the data can deliver has also grown. In this paper, we identify these user-expectations and explore how MBES backscatter is utilized by different communities involved in marine seabed research at present, and the aspirations that these communities have for the data in the future. The results presented here are based on a user survey conducted by the GeoHab (Marine Geological and Biological Habitat Mapping) association. This paper summarises the different processing procedures employed to extract useful information from MBES backscatter data and the various intentions for which the user community collect the data. We show how a range of backscatter output products are generated from the different processing procedures, and how these results are taken up by different scientific disciplines, and also identify common constraints in handling MBES BS data. Finally, we outline our expectations for the future of this unique and important data source for seafloor mapping and characterisation. 相似文献
6.
This paper presents a fully automated procedure to derive the intertidal beach bathymetry on a daily basis from video images of low-sloping beaches that are characterised by the intermittent emergence of intertidal bars. Bathymetry data are obtained by automated and repeated mapping of shorelines from video time exposure images for different (tidal) water levels (Aarninkhof, S.G.J., Turner, I.L., Dronkers, T.D.T., Caljouw, M., Nipius, L., 2003. A video-based technique for mapping intertidal beach bathymetry. Coastal Engineering 49, 275–289; Plant, N.G. and Holman, R.A., 1997. Intertidal beach profile estimation using video images. Marine Geology 140, 1–24.). The developed procedure handles intelligent selection of a shoreline search area and unsupervised quality control of the obtained bathymetry data. The automatically retrieved beach bathymetries compare very well to bathymetries derived from the original manual mapping procedure and to ground truth data points (DGPS). 相似文献
7.
Processing and analysis of Simrad multibeam sonar data 总被引：1，自引：0，他引：1
Neil C. Mitchell 《Marine Geophysical Researches》1996,18(6):729-739
The common approach to analysing data collected with multibeam and sidescan sonars is to visually interpret charts of contoured bathymetry and mosaics of seabed images. However, some of the information content is lost by processing the data into charts because this involves some averaging; the analysis might uncover more information if done on the data at an earlier stage in the processing. Motivated by this potential, I have created a software system which can be used to analyse data collected with Simrad EM1000 (shallow water) and EM12 (deep water) multibeam sonars, as well as to generate bathymetry contour charts and backscatter mosaics. The system includes data preprocessing, such as navigation filtering, depth filtering (removal of outlying values), and amplitude mapping using the multibeam bathymetry to correctly position image pixels across the swath. The data attributes that can be analysed include the orientation and slope of the seafloor, and the mean signal strength for each sounding. To determine bathymetry attributes such as slope, the soundings across a number of beams and across a series of pings are grouped and a least-squares plane fitted to them. Bathymetric curvature is obtained by detrending the grouped data using the least-squares plane and fitting a paraboloid to the residuals. The magnitudes and signs of the paraboloid's coefficients reveal depressions and hills and their orientations. Furthermore, the seafloor geology can be classified using a simple combination of these attributes. For example, flat-lying sediments can be classified where the backscatter, slope and curvature fall below specified values. 相似文献
8.
海岸线对于海岸带保护与管理具有重要意义。海岸线现场测绘施测周期长且在地形复杂的区域施测难度大,基于遥感影像的海岸线判绘对解译人员的要求高,难以获取严格意义的海岸线。针对上述问题,本文提出一种基于机载LiDAR与潮汐推算的自然岸线遥感提取方法:基于机载LiDAR系统获取的航空正射影像解译瞬时水边线,应用LiDAR系统提取的DEM和建立的高程系统转换模型,通过潮汐数据推算研究区域的海岸线。通过与“908专项”航空遥感调查岸线结果比对,按本文方法所提取的3种自然岸线(砂质岸线、基岩岸线和淤泥质岸线)的均方根误差分别为1.66,5.23和32.48 m。结果表明,该方法可用于砂质岸线和基岩岸线的提取,且具有无需开展现场测量工作的优势,可提高海岸线提取的效率。 相似文献
9.
《Marine Policy》2013
Natural resource governance is expected to respond effectively and timely to dynamic environmental conditions, also in a manner that reflects social and political complexity of the system that it aims to govern. Values, images and principles that resource users and governing actors hold about how the world works represent a fundamental part of that complexity. These elements have indefinite form and meaning, may be incommensurable, competing and incompatible, and they often go unnoticed in governance discourse. This paper examines how values, images and principles are represented in a fisheries setting, and explores their diversity and ubiquity as well as the potential differences in the way they are conceived by various stakeholders. These characteristics are shown to give rise to the difficulties in policy planning and implementation, and create implications to power relations and overall governability of a fisheries system. The paper posits that governance challenges could be lessened if stakeholders' values, images, and principles are made explicit, understood, and articulated into the policy and decision-making process. It concludes with suggestions about future research steps. 相似文献
10.
This paper applies computer vision techniques to underwater video images of bioluminescent biota for quantifying, tracking, and identification. Active contour models are adapted for computerized image segmentation, labeling, tracking, and mapping of the bioluminescent plankton recorded by low-light-level video techniques. The system automatically identifies luminous events and extracts features such as duration, size, and coordinates of the point of impact, and uses this information to taxonomically classify the plankton species. This automatic classification can aid oceanographic researchers in characterizing the in situ spatial and temporal relationships of these organisms in their underwater environment. Experiments with real oceanographic data are reported. The results indicate that the approach yields performance comparable to human expert level capability. Furthermore, because the described technique has the potential to rapidly process vast quantities of video data, it may prove valuable for other similar applications 相似文献
11.
Robert T. Bird Roger C. Searle Valerie Paskevich David C. Twichell 《Marine Geophysical Researches》1996,18(6):651-661
We have replaced the usual band of poor-quality data in the near-nadir region of our GLORIA long-range sidescan-sonar imagery with a shaded-relief image constructed from swath bathymetry data (collected simultaneously with GLORIA) which completely cover the nadir area. We have developed a technique to enhance these pseudo-sidescan images in order to mimic the neighbouring GLORIA backscatter intensities. As a result, the enhanced images greatly facilitate the geologic interpretation of the adjacent GLORIA data, and geologic features evident in the GLORIA data may be correlated with greater confidence across track. Features interpreted from the pseudo-sidescan may be extrapolated from the near-nadir region out into the GLORIA range where they may nt have been recognized otherwise, and therefore the pseudo-sidescan can be used to ground-truth GLORIA interpretations. Creation of digital sidescan mosaics utilized an approach not previously used for GLORIA data. Pixels were correctly placed in cartographic space and the time required to complete a final mosaic was significantly reduced. Computer software for digital mapping and mosaic creation is incorporated into the newly-developed Woods Hole Image Processing System (WHIPS) which can process both low- and high-frequency sidescan, and can interchange data with the Mini Image Processing System (MIPS) most commonly used for GLORIA processing. These techniques are tested by creating digital mosaics of merged GLORIA sidescan and Hydrosweep pseudo-sidescan data from the vicinity of the Juan Fernandez microplate along the East Pacific Rise (EPR). 相似文献
12.
近年来,星载/机载的在轨海洋观测设备日益增多。如何从星/机在轨观测的数据中快速且准确地检索出关键图像并进行回传,逐渐成为在轨实时处理的重要研究课题。哈希函数作为一种映射函数,能够将不同图像变换为相同长度的二进制码,并且保持类似图像二进制码的相似性。为了保证二进制编码的特征表达能力,采用深度卷积神经网络(Convolutional Neural Network,CNN)提取海洋图像的特征信息,对图像进行哈希变换。本文以海洋观测图像作为训练数据集,基于深度卷积神经网络在GPU(Graphics Processing Unit)上训练哈希算法。在此基础上,本文将训练好的哈希函数在FPGA(Field Programmable Gate Array)上实现,完成海洋观测图像的在轨快速检索,为海洋观测实时处理提供了有效技术手段。 相似文献
13.
Larry A. Mayer 《Marine Geophysical Researches》2006,27(1):7-17
Over the past few years there have been remarkable and concomitant advances in sonar technology, positioning capabilities,
and computer processing power that have revolutionized the mapping, imaging and exploration of the seafloor. Future developments
must involve all aspects of the “seafloor mapping system,” including, sonars, ancillary sensors (motion sensors, positioning
systems, and sound speed sensors), platforms upon which they are mounted, and the products that are produced. Current trends
in sonar development involve the use of innovative new transducer materials and the application of sophisticated processing
techniques including focusing algorithms that dynamically compensate for the curvature of the wavefront in the nearfield and
thus allow narrower beam widths (higher lateral resolution) at close ranges . Future developments will involve “hybrid”, phase-comparison/beam-forming
sonars, the development of broad-band “chirp” multibeam sonars, and perhaps synthetic aperture multibeam sonars. The inability
to monitor the fine-scale spatial and temporal variability of the sound speed structure of the water column is often a limiting
factor in the production of accurate maps of the seafloor; improvements in this area will involve continuous monitoring devices
as well as improved ocean models and perhaps tomography. Remotely Operated Vehicles (ROV’s) and particularly Autonomous Underwater
Vehicles (AUV’s) will become more important as platforms for seafloor mapping systems. There will also be great changes in
the products produced from seafloor mapping and the processing necessary to create them. New processing algorithms are being
developed that take advantage of the density of multibeam sonar data and use statistically robust techniques to “clean” massive
data sets very rapidly. A range of approaches are being explored to use multibeam sonar bathymetry and imagery to extract
quantitative information about seafloor properties, including those relevant to fisheries habitat. The density of these data
also enable the use of interactive 3-D visualization and exploration tools specifically designed to facilitate the interpretation
and analysis of very large, complex, multi-component spatial data sets. If properly georeferenced and treated, these complex
data sets can be presented in a natural and intuitive manner that allows the simple integration and fusion of multiple components
without compromise to the quantitative aspects of the data and opens up new worlds of interactive exploration to a multitude
of users. 相似文献
14.
15.
Multibeam echosounders are becoming widespread for the purposes of seafloor bathymetry mapping, but the acquisition and the use of seafloor backscatter measurements, acquired simultaneously with the bathymetric data, are still insufficiently understood, controlled and standardized. This presents an obstacle to well-accepted, standardized analysis and application by end users. The Marine Geological and Biological Habitat Mapping group (Geohab.org) has long recognized the need for better coherence and common agreement on acquisition, processing and interpretation of seafloor backscatter data, and established the Backscatter Working Group (BSWG) in May 2013. This paper presents an overview of this initiative, the mandate, structure and program of the working group, and a synopsis of the BSWG Guidelines and Recommendations to date. The paper includes (1) an overview of the current status in sensors and techniques available in seafloor backscatter data from multibeam sonars; (2) the presentation of the BSWG structure and results; (3) recommendations to operators, end-users, sonar manufacturers, and software developers using sonar backscatter for seafloor-mapping applications, for best practice methods and approaches for data acquisition and processing; and (4) a discussion on the development needs for future systems and data processing. We propose for the first time a nomenclature of backscatter processing levels that affords a means to accurately and efficiently describe the data processing status, and to facilitate comparisons of final products from various origins. 相似文献
16.
17.
Chun-Feng Li Zuyi Zhou Jiabiao Li Bing Chen Jianhua Geng 《Marine Geophysical Researches》2008,29(4):223-238
We made a systematic investigation on major structures and tectonic units in the South China Sea basin based on a large magnetic
and seismic data set. For enhanced magnetic data interpretation, we carried out various data reduction procedures, including
upward continuation, reduction to the pole, 3D analytic signal and power spectrum analyses, and magnetic depth estimation.
Magnetic data suggest that the South China Sea basin can be divided into five magnetic zones, each with a unique magnetic
pattern. Zone A corresponds roughly to the area between Taiwan Island and a relict transform fault, zone B is roughly a circular
feature between the relict transform fault and the northwest sub-basin, and zones C, D, and E are the northwest sub-basin,
the east sub-basin, and the southwest sub-basin, respectively. This complexity in basement magnetization suggests that the
South China Sea evolved from multiple stages of opening under different tectonic settings. Magnetic reduction also fosters
improved interpretation on continental margin structures, such as Mesozoic and Cenozoic sedimentary basins and the offshore
south China magnetic anomaly. We also present, for the first time, interpretations of three new 2D reflection seismic traverses,
which are of ~2,000 km in total length and across all five magnetic zones. Integration of magnetic and seismic data enables
us to gain a better 3D mapping on the basin structures. It is shown that the transition from the southwest sub-basin to the
east sub-basin is characterized by a major ridge formed probably along a pre-existing fracture zone, and by a group of primarily
west-dipping faults forming an exact magnetic boundary between zones D and E. The northwest sub-basin has the deepest basement
among the three main sub-basins (i.e., the northwest sub-basin, the southwest sub-basin, and the east sub-basin). Our seismic
data also reveal a strongly faulted continent–ocean transition zone of about 100 km wide, which may become wider and dominated
with magmatism or transit to an oceanic crust further to the northeast. 相似文献
18.
Michael Riedel 《Marine Geophysical Researches》2007,28(4):355-371
Two single-channel seismic (SCS) data sets collected in 2000 and 2005 were used for a four-dimensional (4D) time-lapse analysis
of an active cold vent (Bullseye Vent). The data set acquired in 2000 serves as a reference in the applied processing sequence.
The 4D processing sequence utilizes time- and phase-matching, gain adjustments and shaping filters to transform the 2005 data
set so that it is most comparable to the conditions under which the 2000 data were acquired. The cold vent is characterized
by seismic blanking, which is a result of the presence of gas hydrate in the subsurface either within coarser-grained turbidite
sands or in fractures, as well as free gas trapped in these fracture systems. The area of blanking was defined using the seismic
attributes instantaneous amplitude and similarity. Several areas were identified where blanking was reduced in 2005 relative
to 2000. But most of the centre of Bullseye Vent and the area around it were seen to be characterized by intensified blanking
in 2005. Tracing these areas of intensified blanking through the three-dimensional (3D) seismic volume defined several apparent
new flow pathways that were not seen in the 2000 data, which are interpreted as newly generated fractures/faults for upward
fluid migration. Intensified blanking is interpreted as a result of new formation of gas hydrate in the subsurface along new
fracture pathways. Areas with reduced blanking may be zones where formerly plugged fractures that had trapped some free gas
may have been opened and free gas was liberated. 相似文献
19.
本文提出了一种基于 TMS32 0 C31串行接口的双通道实时数据采集处理系统的设计与实现方案 ,该设计以 TMS32 0 C31和 TL C32 0 AD5 0 C为核心器件 ,具有两个独立的 A/D,D/A通道 ,能够实现 32位浮点计算和 16位数据采集与回放。应用该系统进行归一化最小均方误差 (Normal-ized L east Mean Square,NLMS)算法实时自适应噪声抵消实验 ,实验结果表明 ,该系统能够实现实时的自适应噪声抵消 ,可广泛应用于实时语音信号处理等领域。 相似文献
20.
Within a shipyard, many designers each have their own design objective cooperating in complex design circumstance that a variety of software tools run on different hardware platforms. Different CAD systems are used by different design stages and departments, and the design result is usually delivered on paper drawings. The proliferation of data and the rising number of disparate data systems do not communicate with each other and certainly do not collaborate. Advanced 3D modelling tools are installed in most of progressive shipyards for advantage to improve their productivities. However these 3D models are repetitiously constructed as per the specified design objectives of disparate software tools in various design stages. This paper describes the development of collaboration modelling framework, knowledge-based design support system, to make a web-based data-sharing collaborative environment potentially allowing to facilitate some applications, construct 3D lines rapidly, translate the product data, and further be capable of providing reasonable model configurations for XML type, and sharing the web services from the Internet to comply with shipyards’ specific strategy for each particular case to be designed. 相似文献