首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 739 毫秒
1.
The rainfall erosivity plays a fundamental role in water soil erosion processes and it can be expressed by its kinetic power. At first in this paper, the raindrop‐size distributions measured, in the period June 2006–March 2014, by an optical disdrometer installed at the Department of Agricultural and Forestry Sciences of University of Palermo are aggregated into rainfall intensity classes, having different ranges, and the measured kinetic power values are determined. Measured kinetic power values are initially used for testing the applicability of the kinetic power‐rainfall intensity relationships proposed by Wischmeier and Smith ( 1978 ), used in Universal Soil Loss Equation (USLE), Brown and Foster ( 1987 ) (RUSLE), and McGregor et al. ( 1995 ) (RUSLE2). Then, the reliability of a theoretical relationship for estimating the kinetic power by rainfall intensity and median volume diameter is verified. Finally, using the literature available datasets, corresponding to measurements carried out by different techniques and in different geographical sites, the analysis demonstrated that the rainfall intensity is not sufficient to determine the rainfall kinetic power. On the contrary, the theoretically deduced relationship allows to reproduce adequately the kinetic power of all available datasets, demonstrating that the knowledge of both rainfall intensity and median volume diameter allows a reliable estimate of the rainfall erosivity.  相似文献   

2.
Knowledge of rainfall characteristics is very important for the accurate estimation of rainfall kinetic energy and prediction of soil erosion. In this study, a reliable and efficient data collection and analysis system was developed to analyse the natural raindrop data collected in subtropical Taiwan. Both raindrop size distributions by number and volume were carefully analysed. The seasonal variations of the rainfall erosivity factor R, which is an index of the erosive potential of rainfall and a function of rainfall kinetic energy, was also discussed. An isoerodent map of Taiwan was also developed based on the rainfall data recorded by 158 automated rainfall‐measuring stations within 26 years. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

3.
Many investigators have attempted to define the threshold of landslide failure, that is, the level of the selected climatic variable above which a rainfall-induced landslide occurs. Intensity–duration (I–d) relationships are the most common type of empirical thresholds proposed in the literature for predicting landslide occurrence induced by rainfall. Recent studies propose the use of the kinetic power per unit volume of rainfall (J m−2 mm−1) to quantify the threshold of landslides induced by rainfall. In this paper, the relationship between rainfall duration and kinetic power corresponding to landslides triggered by rain was used to propose a new approach to define the threshold for predicting landslide occurrence. In particular, for the first time, a kinetic power per unit volume of rainfall–duration relationship is proposed for defining the minimum threshold needed for landslide failure. This new method can be applied using commonly used relationship for estimating the kinetic power per unit volume of rainfall and a new equation based on the measured raindrop size distribution. The applicability of this last method was tested using the data of rainfall intensity, duration and median volume diameter for 51 landslides in Taiwan. For the 51 landslides, the comparison between the measured pairs' kinetic power–duration and all selected relationships demonstrated that the equation based on the measured raindrop size distribution is the best method to define the landslide occurrence threshold, as it is both a process-oriented approach and is characterized by the best statistical performance. This last method has also the advantage to allow the forecasting of landslide hazard before the end of the rainfall event, since the rainfall kinetic power threshold value can be exceeded for a time interval less than the event duration.  相似文献   

4.
The relatively high cost of commercially available raindrop spectrometers and disdrometers has inhibited detailed and intensive research on drop size distribution, kinetic energy and momentum of rainfall which are important for understanding and modelling soil erosion caused by raindrop detachment. In this study, an approach to find the drop size distribution, momentum and kinetic energy of rainfall using a relatively inexpensive device that uses a piezoelectric force transducer for sensing raindrop impact response is introduced. The instrument continuously and automatically records, on a time‐scale, the amplitude of electrical pulses produced by the impact of raindrops on the surface of the transducer. The size distribution of the raindrops and their respective kinetic energy are calculated by analysing the number and amplitude of pulses recorded, and from the measured volume of total rainfall using a calibration curve. Simultaneous measurements of the instrument, a rain gauge and a dye‐stain method were used to assess the performance of the instrument. Test results from natural and simulated rainfalls are presented. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

5.
A new approach is proposed to simulate splash erosion on local soil surfaces. Without the effect of wind and other raindrops, the impact of free‐falling raindrops was considered as an independent event from the stochastic viewpoint. The erosivity of a single raindrop depending on its kinetic energy was computed by an empirical relationship in which the kinetic energy was expressed as a power function of the equivalent diameter of the raindrop. An empirical linear function combining the kinetic energy and soil shear strength was used to estimate the impacted amount of soil particles by a single raindrop. Considering an ideal local soil surface with size of 1 m × 1 m, the expected number of received free‐falling raindrops with different diameters per unit time was described by the combination of the raindrop size distribution function and the terminal velocity of raindrops. The total splash amount was seen as the sum of the impact amount by all raindrops in the rainfall event. The total splash amount per unit time was subdivided into three different components, including net splash amount, single impact amount and re‐detachment amount. The re‐detachment amount was obtained by a spatial geometric probability derived using the Poisson function in which overlapped impacted areas were considered. The net splash amount was defined as the mass of soil particles collected outside the splash dish. It was estimated by another spatial geometric probability in which the average splashed distance related to the median grain size of soil and effects of other impacted soil particles and other free‐falling raindrops were considered. Splash experiments in artificial rainfall were carried out to validate the availability and accuracy of the model. Our simulated results suggested that the net splash amount and re‐detachment amount were small parts of the total splash amount. Their proportions were 0·15% and 2·6%, respectively. The comparison of simulated data with measured data showed that this model could be applied to simulate the soil‐splash process successfully and needed information of the rainfall intensity and original soil properties including initial bulk intensity, water content, median grain size and some empirical constants related to the soil surface shear strength, the raindrop size distribution function and the average splashed distance. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

6.
Abstract

Rainfall simulators have often been used to mimic natural rainfall for studies of various land-surface and water interaction processes. The characteristics of the simulated rainfall are the main indicators used to judge the performance of the rainfall simulators. The aim of this study is to investigate the potential of piezoelectric transducers for measuring and evaluating a dripper-type simulated rainfall drop-size distribution (DSD) and kinetic energy (KE). The directly measured KE was significantly correlated with the estimated KE using the drop-size distribution and empirical rain drop fall velocity relationships. This result emphasizes the potential use of the piezoelectric sensor to directly measure and evaluate rainfall kinetic energy. Also, the relationship between rainfall intensity and KE showed good patterns of agreement between simulated rainfall and natural rainfall.

Citation Abd Elbasit, M. A. M., Yasuda, H. & Salmi, A. (2011) Application of piezoelectric transducers in simulated rainfall erosivity assessment. Hydrol. Sci. J. 56(1), 187–194.  相似文献   

7.
The Simulator of Artificial RaInfall (SARI) rainfall simulator (RS) is a newly designed, constructed and calibrated, portable, two-nozzle RS with low water consumption, accurate measurement, easy management and low cost. The raindrop size distribution and velocity and mean rainfall intensity were measured. The best rainfall spatial distribution was achieved with nozzles separated by 50, 60 and 70 cm, and with oscillation angles of 30, 45 and 60°, at a pressure of 60 kPa. The uniformity coefficient varied from 57 to 61% and rainfall intensity from 48 to 101 mm h?1. The raindrop diameter varied from 0.2 to 9.9 mm. The raindrop velocity at the optimum pressure of 60 kPa, which was measured with high-speed photography, ranged from 1.1 to 7.1 m s?1. Comparison with other RSs shows that the SARI simulator is a suitable apparatus to research soil erosion and runoff generation under laboratory and field conditions.  相似文献   

8.
Abstract

Knowledge of the relationship between rainfall intensity and kinetic energy and its variations in time and space is important for the prediction of erosion hazard. Kinetic energy and erosivity are also strongly controlled by raindrop size. However, studies on raindrop measurement and different practical techniques have been rarely documented. The current study therefore aimed to apply existing raindrop-size measurement techniques—the photographic, flour-pellet and stain methods, as well as an innovative flour-stain method—and to evaluate their applicability at several intensities in Mazandaran Province, Iran. The distribution of raindrop size obtained by the different methods was recorded and compared with those obtained through applying a high-speed imaging technique. All the analyses were made with the help of a SPSS software package. The results showed that the raindrop diameters ranged from 0.2 to 5.16 mm at different rainfall intensities. Statistical comparison of the methods using the Duncan test showed that the flour-pellet method presented similar results to the photographic technique; it was concluded that this can be used as a practical and inexpensive method to estimate a wide range of raindrop sizes.

Editor Z.W. Kundzewicz

Citation Sadeghi, S.H., Abdollahi, Z., and Khaledi Darvishan, A., 2013. Experimental comparison of some techniques for estimating natural raindrop size distribution on the south coast of the Caspian Sea, Iran. Hydrological Sciences Journal, 58 (6), 1374–1382.  相似文献   

9.
In the study of soil erosion, specifically on detachment of soil particles by raindrop impact, kinetic energy is a commonly suggested indicator of the raindrop's ability to detach soil particles from the soil mass. Since direct measurement of kinetic energy requires sophisticated and costly instruments, the alternative approach is to estimate it from rainfall intensity. The present study aims at establishing a relationship between rainfall intensity and kinetic energy for rainfalls in Central Cebu, Philippines as a preface of a wider regional investigation.

Drop size distributions of rainfalls were measured using the disdrometer RD-80. There are two forms of kinetic energy considered here. One is kinetic energy per unit area per unit time (KER, J m−2 h−1) and the other is kinetic energy per unit area per unit depth (KE, J m−2 mm−1). Relationships between kinetic energy per unit area per unit time (KER) and rainfall intensity (I) were obtained using linear and power relations. The exponential model and the logarithmic model were fitted to the KE–I data to obtain corresponding relationships between kinetic energy per unit area per unit depth of rainfall (KE) and rainfall intensity (I). The equation obtained from the exponential model produced smaller standard error of estimates than the logarithmic model.  相似文献   


10.
Data on drop size distribution and kinetic energy load of rainstorms are basic for rainfall erosivity indices. A simple and relatively inexpensive instrument was used to asses the instantaneous intensity and kinetic energy load of rainstorms in Hong Kong. Both the drop size and the instantaneous kinetic energy load of rainfall in Hong Kong are greater than in temperate and subtropical climates. The high kinetic energy results from the large size and greater number of raindrops falling per unit time. A high correlation between the kinetic energy of rainfall and the amount of rainfall allows for a convenient estimate of the energy load of storms from the amount of rainfall. Of more significance to the erosion process is the determination that about 74% of the total annual rainfall is erosive, containing about three‐quarters of the total annual energy load of the rains. The variability of rainfall parameters within a rainfall and from storm to storm is shown. The energy–intensity relationship, seasonal and annual distributions of rainfall erosivity are presented. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

11.
Simulations using a mechanistic model of raindrop driven erosion in rain‐impacted flow were performed with particles travelling by suspension, raindrop induced saltation and flow driven saltation. Results generated by both a high intensity storm, and a less intense one, indicate that, because of the effect of flow depth on the delivery of raindrop energy to the bed, there is a decline in sediment concentration, and hence soil loss per unit area, with slope length when particles are transported by raindrop induced saltation. However, that decline is reversed when the critical velocities that lead to flow driven saltation are episodically exceeded during an event. The simulations were performed on smooth surfaces and a single drop size but the general relationships are likely to apply for rain made up of a wide range of drop size. Although runoff is not always produced uniformly, as a general rule, flow velocities increase with slope length so that, typically, the distance particles travel before being discharged during an event increase with slope length. The effect of slope length on soil loss per unit area is often considered to vary with slope length to a power greater than zero and less that 1·0. The simulations show that effect of slope length on sediment discharge is highly dependent on the variations in runoff response resulting from variations in rainfall duration‐intensity‐infiltration conditions rather than plot length per se. Consequently, predicting soil loss per unit area using slope length with positive powers close to zero when sheet erosion occurs may not be as effective as commonly expected. Erosion by rain‐impacted flow is a complex process and that complexity needs to be considered when analysing the results of experiments associated with rain‐impacted flow under both natural and artificial conditions. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

12.
ABSTRACT

The modelling of soil loss and investigation of urban hydrology and wet weather pollution in Malaysia requires the definition of rainfall parameters for the region. In this study, an inexpensive method was applied to establish the influence of raindrop diameter on kinetics and rain intensity in Skudai, Peninsular Malaysia, as a prelude to wider regional research. Raindrop sizes vary from less than 1.2 mm to as big as 7.0 mm, with median raindrop diameters of 2.51 mm and a mean diameter of 2.56 mm. The median raindrop diameter–intensity relationship correlates strongly using power and exponential equations, with coefficients of determination of 0.75 and 0.73, respectively. The kinetic energy–intensity relationship fits an exponential function and also a linear equation with R2 values of 0.49 and 0.34, respectively. An average rain kinetic energy of 30 J m-2 mm-1 was recorded. This research leads to an objective reclassification of rainfall intensities in the region.
Editor Z.W. Kundzewicz; Associate editor not assigned  相似文献   

13.
Rainfall erosivity represents the primary driver for particle detachment in splash soil erosion. Several raindrop erosivity indices have been developed in order to quantify the potential of rainfall to cause soil erosion. Different types of rainfall simulators have been used to relate rainfall characteristics to soil detachment. However, rainfall produced by different rainfall simulators has different characteristics, specifically different relationships between rainfall intensity and rainfall erosivity. For this reason, the effect of rainfall characteristics produced by a dripper‐type rainfall simulator on splash soil erosion (Ds) has been investigated. The simulated rainfall kinetic energy (KE) and drop size distribution (DSD) were measured using piezoelectric transducers, modified from the Vaisala RAINCAP® rain sensor. The soil splash was evaluated under various simulated rainfall intensities ranging from 10 to 100 mm h?1 using the splash‐cup method. The simulated rainfall intensity (I) and kinetic energy relationship (I–KE) was found to be different from natural rainfall. The simulated rainfall intensity and splash soil erosion relationship (I–Ds) also followed this same trend. The I–KE relationship was found to follow the natural rainfall trend until the rainfall intensity reached 30 mm h?1 and above this limit the KE started to decrease. This emphasizes the importance of the I–KE relationship in determining the I‐Ds relationship, which can differ from one rainfall simulator to another. Ds was found to be highly correlated with KE (r = 0·85, P < 0·001), when data produced by the rainfall intensity ranged from 10 to 100 mm h?1. However, when the threshold rainfall intensity (30 mm h?1) was considered, the correlation coefficient further improved (r = 0·89, P = 0·001). Accordingly, to improve the soil splash estimation of simulated rainfall under various rainfall intensities the I–KE characterization relationship for rainfall simulators has to be taken into account. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

14.
A series of rainfall simulation experiments was carried out at the Walnut Gulch Experimental Watershed, Tombstone, Arizona (31° 43′N, 110° 41′W), to observe the speed at which desert pavement surfaces could be re-established following disturbance. The results of these experiments, which consisted of repeated, 5 min rainfall events, demonstrate that pavements can reform within 10 events, which is compatible with observations of the recovery of surfaces under natural rainfall on an annual cycle. A model for the development of pavements by raindrop erosion processes had previously shown the importance of these processes. The rainfall simulation experiments were used to test the general applicability of this model. The model was able to reproduce the general characteristics of the regenerated surfaces and the timing of their development. However, details of the particle size fractions produced were less well simulated by the model. Testing of the sensitivity of the model to the sediment transport parameters suggests that this problem is not related to the soil characteristics, but is more likely to be an indication of a poor understanding of all the feedbacks operating in the raindrop erosion processes. Copyright © 1999 John Wiley & Sons, Ltd.  相似文献   

15.
IINTRODUCTIONTheinterrillerosiononafieldplotisaffectedbythekineticenergyoftherainfall,wind,topographyfactors,propertiesofsoilandthecanopy.Theinterrillerosionoccursasthefirstdropimpactsthehillslopes.Theinterrillerosionoccursinallkindsofrainfallandtheamountofthesplasherosion,whichisthemainpartofinterrillerosion,canaccountforagreatpanofthetotalerosionamountinaheavystorm(Baner1990,Glymph1957,QianandWan1986,Zhou1981).Therefore,itisveryimportanttorevealthemechanismtoestimatetheamountofinterri…  相似文献   

16.
Increasing our understanding of the small scale variability of drop size distributions (DSD), and therefore of several bulk characteristics of rainfall processes, has major implications for our interpretation of the remote sensing based estimates of precipitation and its uncertainty. During the spring and summer of 2002 the authors conducted the DEVEX experiment (disdrometer evaluation experiment) to compare measurements of natural rain made with three different types of disdrometers collocated at the Iowa City Municipal Airport in Iowa City, Iowa in the Midwestern United States. This paper focuses on the evaluation of the instruments rather than analysis of the hydrometeorological aspects of the observed events. The comparison demonstrates discrepancies between instruments. The authors discuss the systematic and random effects in terms of rainfall quantities, drop size distribution properties, and the observed drop size vs. velocity relationships. Since the instruments were collocated, the effects of the natural variability of rain are reduced some with time integration, isolating the instrumental differences. The authors discuss the status of DSD measurement technologies and the implications for a range of hydrologic applications from remote sensing of rainfall to atmospheric deposition to soil erosion and sediment transport in the environment. The data set collected during the DEVEX experiment is made available to the research community.  相似文献   

17.
ABSTRACT

Optical disdrometers can be used to estimate rainfall erosivity; however, the relative accuracy of different disdrometers is unclear. This study compared three types of optical laser-based disdrometers to quantify differences in measured rainfall characteristics and to develop correction factors for kinetic energy (KE). Two identical PWS100 (Campbell Scientific), one Laser Precipitation Monitor (Thies Clima) and a first-generation Parsivel (OTT) were collocated with a weighing rain gauge (OTT Pluvio2) at a site in Austria. All disdrometers underestimated total rainfall compared to the rain gauge with relative biases from 2% to 29%. Differences in drop size distribution and velocity resulted in different KE estimates. By applying a linear regression to the KE–intensity relationship of each disdrometer, a correction factor for KE between the disdrometers was developed. This factor ranged from 1.15 to 1.36 and allowed comparison of KE between different disdrometer types despite differences in measured drop size and velocity.  相似文献   

18.
Forest canopies present irregular surfaces that alter both the quantity and spatiotemporal variability of precipitation inputs. The drop size distribution (DSD) of rainfall varies with rainfall event characteristics and is altered substantially by the forest stand properties. Yet, the influence of two major European tree species, European beech (Fagus sylvatica L.) and Norway spruce (Picea abies (L.) H. Karst), on throughfall DSD is largely unknown. In order to assess the impact of these two species with differing canopy structures on throughfall DSD, two optical disdrometers, one above and one below the canopy of each European beech and Norway spruce, measured DSD of both incident rainfall and throughfall over 2 months at a 10‐s resolution. Fractions of different throughfall categories were analysed for single‐precipitation events of different intensities. While penetrating the canopies, clear shifts in drop size and temporal distributions of incoming rainfall were observed. Beech and spruce, however, had different DSD, behaved differently in their effect on diameter volume percentiles as well as width of drop spectrum. The maximum drop sizes under beech were higher than under spruce. The mean ± standard deviation of the median volume drops size (D50) over all rain events was 2.7 ± 0.28 mm for beech and 0.80 ± 0.04 mm for spruce, respectively. In general, there was a high‐DSD variability within events indicating varying amounts of the different throughfall fractions. These findings help to better understand the effects of different tree species on rainfall partitioning processes and small‐scale variations in subcanopy rainfall inputs, thereby demonstrating the need for further research in high‐resolution spatial and temporal properties of rainfall and throughfall.  相似文献   

19.
A catalogue of historical landslides, 1951–2002, for three provinces in the Emilia‐Romagna region of northern Italy is presented and its statistical properties studied. The catalogue consists of 2255 reported landslides and is based on historical archives and chronicles. We use two measures for the intensity of landsliding over time: (i) the number of reported landslides in a day (DL) and (ii) the number of reported landslides in an event (Sevent), where an event is one or more consecutive days with landsliding. From 1951–2002 in our study area there were 1057 days with 1 ≤ DL ≤?45 landslides per day, and 596 events with 1 ≤ Sevent ≤ 129 landslides per event. In the first set of analyses, we find that the probability density of landslide intensities in the time series are power‐law distributed over at least two‐orders of magnitude, with exponent of about ?2·0. Although our data is a proxy for landsliding built from newspaper reports, it is the first tentative evidence that the frequency‐size of triggered landslide events over time (not just the landslides in a given triggered event), like earthquakes, scale as a power‐law or other heavy‐tailed distributions. If confirmed, this could have important implications for risk assessment and erosion modelling in a given area. In our second set of analyses, we find that for short antecedent rainfall periods, the minimum amount of rainfall necessary to trigger landslides varies considerably with the intensity of the landsliding (DL and Sevent); whereas for long antecedent periods the magnitude is largely independent of the cumulative amount of rainfall, and the largest values of landslide intensity are always preceded by abundant rainfall. Further, the analysis of the rainfall trend suggests that the trigger of landslides in the study area is related to seasonal rainfall. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

20.
Effects of rainfall patterns on runoff and rainfall-induced erosion   总被引：3，自引：0，他引：3  
Rainfall-induced erosion involves the detachment of soil particles by raindrop impact and their transport by the combined action of the shallow surface runoff and raindrop impact.Although temporal variation in rainfall intensity(pattern)during natural rainstorms is a common phenomenon,the available information is inadequate to understand its effects on runoff and rainfall-induced erosion processes.To address this issue,four simulated rainfall patterns(constant,increasing,decreasing,and increasing-decreasing)with the same total kinetic energy were designed.Two soil types(sandy and sandy loam)were subjected to simulated rainfall using 15 cm×30 cm long detachment trays under infiltration conditions.For each simulation,runoff and sediment concentration were sampled at regular intervals.No obvious difference was observed in runoff across the two soil types,but there were significant differences in soil losses among the different rainfall patterns and stages.For varying-intensity rainfall patterns,the dominant sediment transport mechanism was not only influenced by raindrop detachment but also was affected by raindrop-induced shallow flow transport.Moreover,the efficiency of equations that predict the interrill erosion rate increased when the integrated raindrop impact and surface runoff rate were applied.Although the processes of interrill erosion are complex,the findings in this study may provide useful insight for developing models that predict the effects of rainfall pattern on runoff and erosion.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号