首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
将废弃橡胶轮胎内填充散体材料形成加筋土结构,已被应用于地基、挡土墙和边坡加固等工程,表现出较好的减震隔振效果,而轮胎加筋土的抗液化性能尚缺乏研究。开展3组小型振动台试验,通过改变轮胎垫层的排水条件,验证轮胎加筋砂垫层的抗液化效果。结果表明:轮胎加筋砂垫层具有良好的抗液化效果,与刚性垫层相比,超静孔压比峰值差值范围在0.01~0.19,残余超静孔压比差值范围在0.08~0.16,轮胎加筋砂垫层提供的排水通道具有抑制超静孔隙水压力发展和加速超静孔隙水消散的作用,孔隙水会沿着轮胎与下部土体的界面以及胎间的排水通道排出;采用量测侧向动土压力的方法,定义土体液化程度量化指标,进一步验证轮胎加筋砂垫层抗液化效果;振动过程中轮胎加筋垫层表面沉降范围为11.3~15.7 mm,表现出较好的变形协调性能。  相似文献   

2.
The behavior of braced excavation in dry sand under a seismic condition is investigated in this paper. A series of shake table tests on a reduced scale model of a retaining wall with one level of bracing were conducted to study the effect of different design parameters such as excavation depth, acceleration amplitude and wall stiffness. Numerical analyses using FLAC 2D were also performed considering one level of bracing. The strut forces, lateral displacements and bending moments in the wall at the end of earthquake motion were compared with experimental results. The study showed that in a post-seismic condition, when other factors were constant, lateral displacement, bending moment, strut forces and maximum ground surface displacement increased with excavation depth and the amplitude of base acceleration. The study also showed that as wall stiffness decreased, the lateral displacement of the wall and ground surface displacement increased, but the bending moment of the wall and strut forces decreased. The net earth pressure behind the walls was influenced by excavation depth and the peak acceleration amplitude, but did not change significantly with wall stiffness. Strut force was the least affected parameter when compared with others under a seismic condition.  相似文献   

3.
Evaluation of seismic displacements of quay walls   总被引:2,自引:0,他引:2  
A new simplified dynamic analysis method is proposed to predict the seismic sliding displacement of quay walls by considering the variation of wall thrust, which is influenced by the excess pore pressure developed in backfill during earthquakes. The method uses the Newmark sliding block concept and the variable yield acceleration, which varies according to the wall thrust, to calculate the quay wall displacement.A series of 1 g shaking table tests were executed to verify the applicability of the proposed method, and a parametric study was performed. The shaking table tests verified that the proposed method properly predicts the wall displacement, and the parametric study showed that the evaluation of a realistic wall displacement is as important as the analysis of liquefaction potential for judging the stability of quay walls.  相似文献   

4.
To understand the post-liquefaction behavior of liquefied ground, it is important to get a better understanding and a more suitable characterization of the variation of excess pore pressure after liquefaction. In this paper, the soil permeability is considered as one of the key soil parameters for clarifying the mechanism of post-liquefaction behavior of liquefied ground. For this reason, a series of shaking table tests were conducted for a Toyoura sand deposit with different soil permeability values. Polymer fluid was used in model tests to vary the permeability of sand deposits. Excess pore pressures and settlements were measured in each test. A basic mechanism in post-liquefaction behavior and the solidification phenomenon after liquefaction were discussed based on these test results. Also, a new method for predicting the dissipation of excess pore pressure was developed. This study provides evidence of the important effect of soil permeability on the velocity with which the solidification front moves upward in liquefied ground. It is suggested that the value of coefficient of permeability of liquefied sand can increase to about 4.0 times the initial value. This variation of permeability after liquefaction should be taken into account in post-liquefaction analysis.  相似文献   

5.
In the analysis of the seismic stability of gravity type quay walls, the magnitudes of force components acting on quay walls during earthquakes and the phase relationships among these force components must be properly evaluated. In general, the force components include inertia force of the wall, lateral earth force, and water force. The magnitude and the phase relationship of each force component vary with time, and are largely affected by the magnitude of excess pore pressure developed in the backfill soil of the quay wall. The dynamic thrust develops at the contact surface between the backfill soil and the wall as a result of the interaction among these force components. In this study, a simple model is proposed to evaluate the magnitude and the phase variation of the dynamic thrust on the back of the wall. The proposed model computes the dynamic thrust by using the force components calculated from existing equations. We verified the proposed model by comparing its results with those obtained from a series of shaking table tests.  相似文献   

6.
Pile foundation as well as other underground structures could be seriously affected by soil liquefaction during strong earthquakes. Damages on pile foundation due to liquefaction can be reduced by implementation of some soil improvement method. Main objective of present study is developing of drain method that can improve the soil in order to mitigate the destructiveness of liquefaction on superstructure supported by pile foundation. Series of shaking table tests were conducted on 2×2 pile foundation and soil model was improved by drains. Configurations of drains around piles, intensity of shaking were one of the parameters that were changing during the tests in order to investigate the response of pile foundation in improved soil condition.Shaking table tests and performed On-site experiment showed the following effects of the new drain method. (1) When the intensity of earthquake motion is 200 gal or less, generation of excess pore water pressure is reduced and the pile bending moment is decreased, (2) when the intensity of earthquake motion is stronger (300 gal or more), drainage effect prevents disappearance of subgrade reaction, and (3) proposed new type of drain can control excess pore water pressure without clogging.  相似文献   

7.
The November 3, 2002 Denali-Alaska earthquake (Mw=7.9) caused significant liquefaction associated damage to various infrastructure built on fine-grained soils. The seismic response, liquefaction potential, and excess pore pressure generation of soils in cold regions, especially those of fine-grained nature, have not been studied thoroughly and therefore are not well-understood. This paper presents results from an extensive laboratory study on the characteristics of excess pore pressure generation and liquefaction potential of fine-grained soils. Laboratory-constituted soils specimens were tested in four categories: (1) tests on specimens subjected to no thermal conditioning or freeze–thaw cycles; (2) tests on specimens conditioned at 24, 5, 1, 0.5, and −0.2 °C; (3) tests on specimens subjected to 1–4 freeze–thaw cycles; and (4) tests on specimens conditioned at near-freezing temperatures of 0.5 and −0.2 °C through different freeze–thaw paths. Strain-controlled, undrained, cyclic triaxial tests were performed at shear strain levels of 0.005–0.8%. Specimens conditioned at different temperatures were found to generate significantly different pore pressures with cyclic loading. The excess pore pressure generation at near or slightly below freezing was found to change dramatically. A transitional change in the dynamic soil behavior, attributed to unfrozen- or frozen-dominant pore water, was discovered. The threshold shear strain was also found to be influenced by the temperature. Subjecting the soil specimens to 1, 2 and 4 freeze–thaw cycles caused a reduction in excess pore pressure generation and slight change in the threshold shear strain. The temperature conditioning path to reach the target temperature was found to be important on the development of excess pore pressure at near and slightly below-freezing temperatures.  相似文献   

8.
This paper presents the results of shaking table model tests which were carried out to investigate the pore water pressure generation and related liquefaction mechanism in layered sand deposits. The experiments were performed on uniform sand columns, silt interlayered sand columns and two layered sand columns deposited at various relative densities and subjected to different input excitations. During the experiments excess pore water pressures were measured by pore pressure transducers installed at three different depths and, surface settlements and thickness of water film developed under less permeable inclusions were measured by a digital camera. The experimental results are discussed and compared to demonstrate the effects of relative density, input acceleration and presence of a silt seam on the generation of excess pore water pressure in sand deposits subjected to dynamic loading. The results showed that the presence of a less permeable silt interlayer within the sand deposit and existence of a loose sand layer underlying dense sand deposits can have significant effect on the pore water pressure generation mechanism.  相似文献   

9.
This paper presents the results of dynamic centrifuge model tests conducted to investigate the liquefaction mechanism in non-homogeneous soil deposits. Four types of model tests were conducted: one model test involved a uniform soil deposit; one involved continuous layered soil deposit; and two involved discontinuous layered soil deposits. Non-homogeneity in the tests was incorporated by including periodically distributed discontinuous silty sand patches. It was found that more excess pore water pressure (EPWP) remains for a longer period of time in the discontinuous region in non-homogeneous soil deposits compared with the continuous layered and uniform soil deposits. The generation of pore water pressure ceases the supply of a new mass of water after seismic excitation; therefore the dissipation of EPWP becomes the dominant factor for settlement after seismic excitation. The rapid dissipation of EPWP through the discontinuous part in the non-homogeneous soil deposits manifests as a larger settlement in the discontinuous part, causing non-uniform settlements.  相似文献   

10.
The linear and non-linear responses of surface soil layers have been predicted through the simultaneous simulation test against the observed ground motions at the six sites in Kobe City during the 1995 Hyogo-ken Nanbu earthquake. The total stress analysis method and the effective stress analysis method have been applied for the rough and detailed verification of the predicted non-linear dynamic behavior at the PIS and RKI sites including the liquefaction phenomenon. The shear strain distribution along depth, the ratio of excess pore water pressure to initial effective stress, the liquefaction strength parameters to initial effective stress, and the stress–strain curve during the earthquake at the PIS site have been investigated when the predicted ground motion could simulate successfully the observed acceleration time histories and response spectra in the non-linear range.  相似文献   

11.
液化场地土-地铁车站结构大型振动台模型试验研究   总被引:5,自引:2,他引:5  
本文对浅埋于可液化南京细砂地基中的地铁车站结构进行了大型振动台试验研究,对部分试验结果进行了整理,分析了模型地基的加速度和振动孔隙水压力的反应规律。试验结果表明:在整个试验过程中,模型地基浅层土和地铁车站侧向附近地基土最容易发生液化;其次,随着振动台台面输入地震动峰值加速度的增大,离车站结构较远的侧向地基土和底层地基土再发生液化,而车站结构正下方的模型地基土最不容易液化。同时,在模型地基土发生液化后,地铁车站结构发生了明显的整体上浮现象。  相似文献   

12.
Accurate prediction of the liquefaction of saturated soils is based on strong coupling between the pore fluid phase and soil skeleton. A practical numerical method for large strain dynamic analysis of saturated soils is presented. The up formulation is used for the governing equations that describe the coupled problem in terms of soil skeleton displacement and excess pore pressure. A mixed finite element and finite difference scheme related to large strain analysis of saturated soils based on the updated Lagrangian method is given. The equilibrium equation of fluid-saturated soils is spatially discretized by the finite element method, whereas terms associated with excess pore pressure in the continuity equation are spatially discretized by the finite difference method. An effective cyclic elasto-plastic constitutive model is adopted to simulate the non-linear behavior of saturated soils under dynamic loading. Several numerical examples that include a saturated soil column and caisson-type quay wall are presented to verify the accuracy of the method and its usefulness and applicability to solutions of large strain liquefaction analysis of saturated soils in practical problems.  相似文献   

13.
饱和黄土在不同外荷载作用下其液化机理具有显著差异.为研究饱和黄土动态液化和静态液化机理的差异性,基于室内动三轴试验和静三轴试验,研究岷县永光饱和黄土动态液化后的动应力与轴向动应变关系、动孔隙水压力比与轴向动应变关系,分析其静态液化后的偏应力与轴向应变关系、孔隙水压力比与轴向应变关系,并结合液化前、后的SEM试验结果,研...  相似文献   

14.
A series of 2-D centrifuge modeling tests with an in-flight shaker were carried out in order to model both the deformation characteristics of backfill and the seismic responses of caisson-type walls embedded in soils with various permeabilities. The rotational and translational modes were found to be in phase or various degrees out of phase with each other for quay walls embedded in soils with varying permeabilities. The alternative pumping and suction processes in excess pore water pressure that are caused by a wall's vibrations increase the level of damage because large amounts of backfill are forcedly leaked into the sea. The test results show that the rotational mode makes the dominant contribution to the changes in excess pore water pressure and in the earth pressure in the deep layers of soil, but the translational mode makes the dominant contribution to these pressures in the shallow layers. The average shear wave velocities were found to decrease rapidly to values as low as 1/8th of the velocity measured at the beginning of shaking.  相似文献   

15.
地铁车站的地震液化上浮是地下结构常见的灾害之一,对处于液化场地的地铁车站需增加抗液化及抗浮措施。通过数值分析的方法对比分析了抗拔桩和隔离墙2种抗浮措施的作用机理及作用效果,研究了车站的上浮位移、地表变形和周围土体超孔隙水压比等动力响应。结果表明:设置抗拔桩可提供抗拔力,隔离墙可有效阻挡液化土的流动,因此地铁车站的上浮位移明显减小;抗拔桩的长度进入非液化土层时抗浮效果最佳;隔离墙的抗浮效果随着与车站主体的距离增加而减弱。通过该项研究,可为液化场地中地铁车站的抗浮设计提供一定的理论参考。  相似文献   

16.
编制完全耦合的三维排水有效应力动力反应分析程序,对可液化地基进行三维地震响应分析,探讨了不同土性参数、不同土层构成和不同附加压重等因素对可液化地基抗液化性能的影响。结果表明:在地震荷载作用下,天然饱和砂土地基中的超孔隙水压力随深度的增大而增大;在不同深度处,超孔压峰值到达的时刻比地震加速度峰值到达的时刻要晚;随输入地震加速度的减弱,深层处的超孔压开始消散或基本保持不变,浅层处的超孔压保持不变或略有上升,这一现象与土性参数、输入地震荷载的情况等因素有关;土性参数对土体本身的抗液化性能有重要影响,初始孔隙比越小,相对密度越大,土体的抗液化能力越强;附加压重有利于地基抗液化能力的提高;随着附加压重的增大,超孔压比减小;附加压重对地基中超孔隙水压力的增长有明显的抑制作用。  相似文献   

17.
This paper outlines the results of an experimental program carried out on centrifuge models of cantilevered and propped retaining walls embedded in saturated sand. The main aim of the paper is to investigate the dynamic response of these structures when the foundation soil is saturated by measuring the accelerations and pore pressures in the soil, displacements and bending moment of the walls. A comparison among tests with different geometrical configurations and relative density of the soil is presented. The centrifuge models were subjected to dynamic loading in the form of sinusoidal accelerations applied at the base of the models. This paper also presents data from pressure sensors used to measure total earth pressure on the walls. Furthermore, these results are compared with previous dynamic centrifuge tests on flexible retaining walls in dry sand.  相似文献   

18.
前人曾指出液化后伴随着超孔隙水压重新分配的渗透会引起流体破坏的可能性。为了研究这一现象,利用实验室三轴试验将孔隙水注入土壤检测了土壤的渗透剪切破坏。该实验是在各项异性的固结作用后保持差应力,使用孔隙水控制装置在体积不变的应变控制条件下将孔隙水注入。实验中所用的材料是在1995年神户地震时被液化的常规洁净细砂和风化的花岗岩土壤。本文以实验结果为基础,讨论了由孔隙水注入引起的渗透剪切破坏判据和导致后液化行为的剪切应变发展特征。  相似文献   

19.
Static and dynamic behavior of hunchbacked gravity quay walls   总被引:2,自引:0,他引:2  
One of the parameters that can affect the lateral pressures behind a retaining wall is the back-face shape of the wall, which can be controlled by the designer, and has not been investigated experimentally. Therefore, in order to study this behavior, a set of 1g shaking table tests was carried out on hunched back gravity type quay walls made of concrete blocks. Crushed stone and silica sand were used in the backfill and subsoil, respectively. The subsoil was prepared by moist tamping. The models were fully instrumented and beside each earth pressure transducer a pore water pressure sensor was also installed behind the wall therefore the lateral effective stress acting on the wall could be calculated. Tests were performed with various base accelerations on models with different subsoil relative densities. The results show that the earth pressure increases at upper portions of the wall and decreases by the leaning slope at lower elevations. Depending on the back-face shape of the wall the total thrust and overturning moment would be increased or decreased after an earthquake. However, the hunched back-shape of the wall tends to raise the point of application of the total thrust exerted on the wall. Other advantages of hunched back walls are demonstrated as well.  相似文献   

20.
One of the most dramatic causes of damage to engineering structures during earthquakes has been the development of soil liquefaction beneath and around the structures. In order to dissipate the excess pore water pressures near structures, gravel drains are usually employed. In this study, the use of recycled concrete crushed stones as gravel drain materials is addressed. In order to investigate the performance of wall-type gravel drains, two series of shaking table tests were performed. The test results showed that gravel drains, when appropriate grain size distribution is considered, effectively dissipate the excess pore water pressure underneath the structure, and consequently reduce the magnitude of uplift. To supplement the laboratory tests, finite element analyses were also performed. For specified structure, ground and earthquake conditions, there is a critical width of gravel drain at which no uplift of structure will occur. The results of the model tests and the finite element analyses were then employed in developing design charts for determining the critical width of gravel drain to prevent buoyant rise of structure when the surrounding soil mass liquefies.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号