共查询到20条相似文献，搜索用时 31 毫秒
1.
传统的波动方程走时核函数(或走时Fréchet导数)多基于互相关时差测量方式及地震波场的一阶Born近似导出,其成立条件非常苛刻.然而,地震波走时与大尺度的速度结构具有良好的线性关系,对于小角度的前向散射波场,Rytov近似优于Born近似.因此,本文基于Rytov近似和互相关时差测量方式,导出了基于Rytov近似的有限频走时敏感度核函数的两种等价形式:频率积分和时间积分表达式.在此基础之上,本文提出了一种隐式矩阵向量乘方法,可以直接计算Hessian矩阵或者核函数与向量的乘积,而无需显式计算和存储核函数及Hessian矩阵.基于隐式矩阵向量乘方法,本文利用共轭梯度法求解法方程实现了一种高效的Gauss-Newton反演算法求解走时层析反问题.与传统的敏感度核函数反演方法相比,本文方法在每次迭代过程中,无需显式计算和存储核函数,极大降低了存储需求.与基于Born近似的伴随状态方法走时层析相比,本文方法具有准二阶的收敛速度,且适用范围更广.数值试验证明了本文方法的有效性. 相似文献
2.
根据地震波传播的有限频理论,对于某个特定震相的观测信息,不仅射线路径上的点对该信息具有影响,射线领域上的其他点对接收信息也具有影响,这种影响可以用核函数来表达.本文基于波动方程的Born近似与Rytov近似,给出了非均匀介质情况下初至地震波振幅与走时菲涅尔体层析成像单频、带限层析核函数的计算方法.通过对均匀介质情况下初至地震波菲涅尔体层析成像核函数解析表达式的理论模型实验与分析,给出了不同维度振幅、走时单频菲涅尔体的空间分布范围,进而给出了带限菲涅尔体边界的确定方法.将本文的走时菲涅尔体层析成像理论应用于表层速度结构反演中,理论模型试验与实际资料处理结果表明,初至波菲涅尔体地震层析成像方法比传统的初至波射线层析成像理论具有更高的反演精度. 相似文献
3.
层析反演是速度建模中最重要的方法之一,结合偏移成像在成像域进行走时层析速度反演是当前比较成熟有效且广泛应用的技术.本文从高斯束偏移成像条件出发,在波动方程的一阶Born近似和Rytov近似下,推导了成像域走时扰动与速度扰动的线性关系,建立了成像域走时层析方程及其显式表达的层析核函数.该核函数的本质是有限频层析核函数,利用该核函数替换常规射线层析核函数可以明显提高层析反演精度.该核函数的计算关键是背景波场格林函数的计算,本文利用高斯束传播算子计算格林函数进而得到走时层析核函数,实现方式灵活高效且计算精度较高.基于高斯束传播算子的偏移成像与层析成像相结合进行深度域建模迭代,体现了速度建模与偏移成像一体化的思想.数值计算及实际数据应用证明了基于高斯束传播算子的成像域走时层析方法的有效性. 相似文献
4.
近地表速度结构通常是利用射线走时层析或菲涅尔体走时层析等反演方法得到的,但它们的目标函数仍利用射线走时残差构建,导致反演精度不高.为此,本文提出了基于散射积分算法的初至波相位走时层析成像方法.该方法的核心是:(1)提出了依赖于频率的相位走时概念;(2)利用依赖于频率的相位走时信息,而非单一的无限频率射线走时;(3)发展了一种改进的相位展开方法,即通过监测相位不连续性和2π周期判定来消除相位折叠现象;(4)考虑了地震波传播的有限频特征,即基于波动理论而非传统的射线路径或有限空间的菲涅尔体构建核函数.通过利用Overthrust模型的数值实验及与传统射线走时层析和菲涅尔体走时层析的对比表明:本文提出的方法是一种有效的初至波走时反演方法.同时,基于Overthrust模型的数值试验还证明了下列结论,即通过挖掘更多的走时信息的确可以获得更高的反演精度和分辨率. 相似文献
5.
针对传统射线层析存在的种种局限性,菲涅尔带走时层析成像摒弃了传统的数学射线,考虑到地震信号具有一定的频带宽度,中央射线附近的介质对地震波的传播产生不同程度的影响。本文提出了多频段组合菲涅尔带走时层析成像方法。该方法以频率域波动方程Born和Rytov近似为基础,推导出建立在带限地震波理论基础上的波动方程 Rytov 近似走时敏感核函数,实现第一菲涅尔带约束下的波动方程走时层析反演方法。同时由于多个频段的引入,充分利用低频段和高频段的特有优势,从而兼顾菲涅尔带层析的计算效率与分辨率。模型试算结果证明了本方法的有效性和稳定性。 相似文献
6.
7.
初至波走时层析反演技术作为建立近地表速度模型的重要手段,是解决陆地资料复杂静校正问题的关键技术。而折射波广泛发育的海洋地震资料,对折射波信息的关注与运用并没有得到广泛的重视。本文首次将层析反演方法应用于海洋拖缆地震数据的近海底速度模型的建立。本文方法与陆地资料层析反演的主要区别在于:①在震源信号的最小相位化处理后进行初至时间的拾取,避免了混合相位子波初至拾取不准带来的误差;②以海水深度与海水速度作为反演约束条件,减小了迭代误差。实测二维资料的层析反演结果表明,本文方法可反演出较为精确的海洋地层速度结构。 相似文献
8.
目前,有关伴随状态法初至波走时层析成像方法的文献,基本上都是基于面积分来定义目标函数,由此得到的伴随方程也都依赖于地表的法向量.这样,一方面会因为伴随变量计算的不准确而造成梯度的不合理,另一方面也无法合理地处理井中观测问题.本文从理论或数值试验角度指出了这些问题,并提出了不依赖地表法向量的改进的伴随状态法走时层析成像方法.主要改进包括:(1)采用体积分定义目标函数,避免了传统方法不能较好处理井中观测数据的缺陷,可以适应任意地表或井中观测系统.(2)采用摄动法得到了新的伴随方程,克服了传统方法中伴随场计算需要依赖于地表法向量的缺陷,使得检波点处的走时残差可以正确地反传播至地下,进而得到更加合理的速度修正方向,提高了速度反演的精度. 相似文献
9.
Seismic tomography is a well‐established approach to invert smooth macro‐velocity models from kinematic parameters, such as traveltimes and their derivatives, which can be directly estimated from data. Tomographic methods differ more with respect to data domains than in the specifications of inverse‐problem solving schemes. Typical examples are stereotomography, which is applied to prestack data and Normal‐Incidence‐Point‐wave tomography, which is applied to common midpoint stacked data. One of the main challenges within the tomographic approach is the reliable estimation of the kinematic attributes from the data that are used in the inversion process. Estimations in the prestack domain (weak and noisy signals), as well as in the post‐stack domain (occurrence of triplications and diffractions leading to numerous conflicting dip situations) may lead to parameter inaccuracies that will adversely impact the resulting velocity models. To overcome the above limitations, a new tomographic procedure applied in the time‐migrated domain is proposed. We call this method Image‐Incident‐Point‐wave tomography. The new scheme can be seen as an alternative to Normal‐Incidence‐Point‐wave tomography. The latter method is based on traveltime attributes associated with normal rays, whereas the Image‐Incidence‐Point‐wave technique is based on the corresponding quantities for the image rays. Compared to Normal‐Incidence‐Point‐wave tomography the proposed method eases the selection of the tomography attributes, which is shown by synthetic and field data examples. Moreover, the method provides a direct way to convert time‐migration velocities into depth‐migration velocities without the need of any Dix‐style inversion. 相似文献
10.
Seismic inversion with generalized Radon transform based on local second-order approximation of scattered field in acoustic media 
下载免费PDF全文
下载免费PDF全文 Sound velocity inversion problem based on scattering theory is formulated in terms of a nonlinear integral equation associated with scattered field. Because of its nonlinearity, in practice, linearization algorisms (Born/single scattering approximation) are widely used to obtain an approximate inversion solution. However, the linearized strategy is not congruent with seismic wave propagation mechanics in strong perturbation (heterogeneous) medium. In order to partially dispense with the weak perturbation assumption of the Born approximation, we present a new approach from the following two steps: firstly, to handle the forward scattering by taking into account the second-order Born approximation, which is related to generalized Radon transform (GRT) about quadratic scattering potential; then to derive a nonlinear quadratic inversion formula by resorting to inverse GRT. In our formulation, there is a significant quadratic term regarding scattering potential, and it can provide an amplitude correction for inversion results beyond standard linear inversion. The numerical experiments demonstrate that the linear single scattering inversion is only good in amplitude for relative velocity perturbation ( \( \delta_{c}/c_{0} \) ) of background media up to 10 %, and its inversion errors are unacceptable for the perturbation beyond 10 %. In contrast, the quadratic inversion can give more accurate amplitude-preserved recovery for the perturbation up to 40 %. Our inversion scheme is able to manage double scattering effects by estimating a transmission factor from an integral over a small area, and therefore, only a small portion of computational time is added to the original linear migration/inversion process. 相似文献
11.
12.
常规τ值法假设应力松弛时间与应变延迟时间近似相等, 造成了常Q模型拟合精度低. 本文利用精确的广义流变体模型Q值计算公式, 研究改进的τ值法求解常Q模型参数. 根据地震波散射理论, 推导了基于广义流变体模型的黏滞性介质一阶波恩近似方程, 结合位移-速度关系得到了含卷积完全匹配层边界条件的黏滞性介质应力-速度方程的一阶波恩近似表达式. 通过数值实验验证并对比了黏滞性介质中全波波动方程、 一阶波恩近似方程以及单程波波动方程的波场特征, 讨论了基于流变体模型的黏滞性介质一阶波恩近似方程对速度扰动和Q扰动的适应性, 以及对旅行时和振幅精度的影响. 相似文献
13.
14.
地震走时层析成像方法是解决复杂近地表模型速度建模问题的重要技术.该方法是一种迭代反演方法,在反演过程中需要反复计算地震射线走时.故而,高效高精度且能适应复杂模型的走时计算方法是地震走时层析成像实用化的关键技术之一.本文引入医学成像领域研究的MSFM(Multi-stencils Fast Marching Methods)用于地震层析反演中的走时计算.该方法在标准FMM(Fast Marching Methods)基础上利用坐标旋转生成新的FMM计算模板,使计算网格点对角方向邻点参与计算,改善了标准FMM存在对角方向误差大的缺陷.本文分析对比了MSFM和标准FMM的计算精度和计算效率;针对地震层析成像技术解决的起伏地表模型建模问题,研究了起伏地表模型地震走时计算的MSFM实现方法;采用炮点邻近区域局部细分网格技术只需增加很少的计算量即可大幅提高计算精度.理论分析和模型试算表明MSFM算法明显改善了FMM的计算精度,同时保持了FMM算法的高效性.文章通过对崎岖地表模型的正演和层析反演试算,验证了基于MSFM的地震走时计算方法对复杂模型有很强的适应能力.研究表明该方法作为地震走时层析反演中高效高精度的正演算法,有很好的应用价值. 相似文献
15.
地震走时层析成像是反演地层各向异性参数分布的有效方法,但是关于地震各向异性介质走时层析成像的研究并不多,其技术远远没有达到成熟的阶段.在野外数据采集时,地表反射波观测方式相对井间和垂直地震剖面观测方式的成本更低,利用qP反射波走时反演各向异性参数具有更加广泛的实用价值.本文实现的TI介质地震走时层析成像方法结合了TI介质反射波射线追踪算法、走时扰动方程和非线性共轭梯度算法,它可以对任意强度的TI介质模型进行反演,文中尝试利用qP反射波走时重建TI介质模型的参数图像.利用qP反射波对层状介质模型和块状异常体模型进行走时反演,由于qP波相速度对弹性模量参数和Thomsen参数的偏微分不同,所以可以分别反演弹性模量参数和Thomsen参数.数值模拟结果表明:利用qP反射波可以反演出TI介质模型的弹性模量参数与Thomsen参数,不同模型的走时迭代反演达到了较好的收敛效果,与各向同性介质走时反演结果相比较,各向异性介质走时反演结果具有较好的识别能力. 相似文献
16.
本文介绍了根据反射地震数据进行波速成象的一种方法,其基础为多种反演技术的综合。由于要求的波速图象C（x,z）具有间断性,除利用走时数据T（x,t）外,在地层比较水平的情况下,还利用了均方根速度V（x,t）和统计子波W（t）的数据来成象。计算机层析成象过程分为三步:首先重做速度分析,取得与初次反射走时一致的均方根速度数据;然后用反射走时与均方根速度联合反演对应分析道的层速度和界面深度;最后由联合反演结果和反射面走时求波速图象函数的数字化版。文中还给出了波速成象方法在我国西北某沉积盆地上的应用及验证结果。 相似文献
17.
与其他偏移方法相比,逆时偏移基于精确的波动方程而不是对其近似,用时间外推来代替深度外推.因此,它具有良好的精度,不受地下构造倾角和介质横向速度变化的限制.激发时间成像条件的求取是叠前逆时偏移的难点之一,本文采用求解程函方程的方法得到地下各点的初至波走时,以此作为叠前逆时偏移的成像条件.基于任意矩形网格和局部平面波前近似的有限差分初至波走时计算方法精度较高并适用于强纵横向变速的复杂介质.试算结果表明,在复杂介质模型中利用叠前逆时深度偏移收到了很好的成像效果. 相似文献
18.
We present a fast approximate method for three‐dimensional low frequency controlled source electro‐magnetic modeling. We apply the method to a synthetic model in a typical marine controlled source electromagnetic scenario, where conductivity and permittivity are different from the known background medium. For 3D configurations, fast computational methods are relevant for both forward and inverse modelling studies. Since this problem involves a large number of unknowns, it has to be solved efficiently to obtain results in a timely manner, without compromising accuracy. For this reason, the Born approximation, extended Born approximation and iterative extended Born approximation are implemented and compared with the full solution of the conjugate gradient fast Fourier transformation method. These methods are based on an electric field domain integral equation formulation. It is shown here how well the iterative extended Born approximation method performs in terms of both accuracy and speed with different configurations and different source positions. The improved accuracy comes at virtually no additional computational cost. With the help of this method, it is now possible to perform sensitivity analysis using 3D modelling in a timely manner, which is vital for controlled source electromagnetic applications. For forward modeling the solution at the sea‐bottom is of interest, because that is where the receivers are usually located. For inverse modeling, the accuracy of the solution in the target zone is important to obtain reasonably accurate conductivity values from the inversion using this approximate solution method. Our modelling studies show that the iterative extended Born approximation method is fast and accurate for both forward and inverse modelling. Sensitivity analysis as a function of the source position and different reservoir sizes validate the accuracy of the iterative extended Born approximation. 相似文献
19.
20.
3-D multi-parameter type traveltime tomography in a spherical coordinate frame: comparison of double and triple class simultaneous inversions 下载免费PDF全文
下载免费PDF全文 It is now common practice to perform simultaneous traveltime inversion for the velocity field and the reflector geometry in reflection/refraction tomography, or the velocity field and the hypocenter locations in regional earthquake tomography, but seldom are all three classes of model parameters updated simultaneously. This is mainly due to the trade-off between the different types of model parameters and the lack of different seismic phases to constrain the model parameters. Using a spherical-coordinate ray tracing algorithm for first and later(primary reflected) arrival tracing algorithm in combination with a popular linearized inversion solver, it is possible to simultaneously recover the three classes of model parameters in regional or global tomographic studies. In this paper we incorporate the multistage irregular shortest-path ray tracing algorithm(in a spherical coordinate system) with a subspace inversion solver to formulate a simultaneous inversion algorithm for triple model parameters updating using direct and later arrival time information.Comparison tests for two sets of data(noise free and added noise) indicate that the new triple-class parameter inversion algorithm is capable of obtaining nearly the same results as the double-class parameter inversion scheme. Furthermore,the proposed multi-parameter type inversion method is not sensitive to a modest level of picking error in the traveltime data, and also performs well with a relatively large uncertainty in earthquake hypocentral locations. This shows it to be a feasible and promising approach in regional or global tomographic applications. 相似文献