首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 261 毫秒
1.
The Argo temperature and salinity profiles in 2005–2009 are assimilated into a coastal ocean general circulation model of the Northwest Pacific Ocean using the ensemble adjustment Kalman filter (EAKF). Three numerical tests, including the control run (CTL) (without data assimilation, which serves as the reference experiment), ensemble free run (EnFR) (without data assimilation), and EAKF experiment (with Argo data assimilation using EAKF), are carried out to examine the performance of this system. Using the restarts of different years as the initial conditions of the ensemble integrations, the ensemble spreads from EnFR and EAKF are all kept at a finite value after a sharp decreasing in the first few months because of the sensitive of the model to the initial conditions, and the reducing of the ensemble spread due to Argo data assimilation is not much. The ensemble samples obtained in this way can well represent the probabilities of the real ocean states, and no ensemble inflation is necessary for this EAKF experiment. Different experiment results are compared with satellite sea surface temperature (SST) data and the Global Temperature-Salinity Profile Program (GTSPP) data. The comparison of SST shows that modeled SST errors are reduced after data assimilation; the error reduction percentage after assimilating the Argo profiles is about 10?% on average. The comparison against the GTSPP profiles, which are independent of the Argo profiles, shows improvements in both temperature and salinity. The comparison results indicated a great error reduction in all vertical layers relative to CTL and the ensemble mean of EnFR; the maximum value for temperature and salinity reaches to 85?% and 80?%, respectively. The standard deviations of sea surface height are employed to examine the simulation ability, and it is shown that the mesoscale variability is improved after Argo data assimilation, especially in the Kuroshio extension area and along the section of 10°N. All these results suggest that this system is potentially useful for improving the simulation ability of oceanic numerical models.  相似文献   

2.
A global ocean data assimilation system based on the ensemble optimum interpolation (EnOI) has been under development as the Chinese contribution to the Global Ocean Data Assimilation Experiment. The system uses a global ocean general circulation model, which is eddy permitting, developed by the Institute of Atmospheric Physics of the Chinese Academy of Sciences. In this paper, the implementation of the system is described in detail. We describe the sampling strategy to generate the stationary ensembles for EnOI. In addition, technical methods are introduced to deal with the requirement of massive memory space to hold the stationary ensembles of the global ocean. The system can assimilate observations such as satellite altimetry, sea surface temperature (SST), in situ temperature and salinity from Argo, XBT, Tropical Atmosphere Ocean (TAO), and other sources in a straightforward way. As a first step, an assimilation experiment from 1997 to 2001 is carried out by assimilating the sea level anomaly (SLA) data from TOPEX/Poseidon. We evaluate the performance of the system by comparing the results with various types of observations. We find that SLA assimilation shows very positive impact on the modeled fields. The SST and sea surface height fields are clearly improved in terms of both the standard deviation and the root mean square difference. In addition, the assimilation produces some improvements in regions where mesoscale processes cannot be resolved with the horizontal resolution of this model. Comparisons with TAO profiles in the Pacific show that the temperature and salinity fields have been improved to varying degrees in the upper ocean. The biases with respect to the independent TAO profiles are reduced with a maximum magnitude of about 0.25°C and 0.1 psu for the time-averaged temperature and salinity. The improvements on temperature and salinity also lead to positive impact on the subsurface currents. The equatorial under current is enhanced in the Pacific although it is still underestimated after the assimilation.  相似文献   

3.
Using Ensemble Adjustment Kalman Filter (EAKF), two types of ocean satellite datasets were assimilated into the First Institute of Oceanography Earth System Model (FIO-ESM), v1.0. One control experiment without data assimilation and four assimilation experiments were conducted. All the experiments were ensemble runs for 1-year period and each ensemble started from different initial conditions. One assimilation experiment was designed to assimilate sea level anomaly (SLA); another, to assimilate sea surface temperature (SST); and the other two assimilation experiments were designed to assimilate both SLA and SST but in different orders. To examine the effects of data assimilation, all the results were compared with an objective analysis dataset of EN3. Different from the ocean model without coupling, the momentum and heat fluxes were calculated via air-sea coupling in FIO-ESM, which makes the relations among variables closer to the reality. The outputs after the assimilation of satellite data were improved on the whole, especially at depth shallower than 1000 m. The effects due to the assimilation of different kinds of satellite datasets were somewhat different. The improvement due to SST assimilation was greater near the surface, while the improvement due to SLA assimilation was relatively great in the subsurface. The results after the assimilation of both SLA and SST were much better than those only assimilated one kind of dataset, but the difference due to the assimilation order of the two kinds of datasets was not significant.  相似文献   

4.
Assimilation of SLA and SST data into an OGCM for the Indian Ocean   总被引：6，自引：0，他引：6  
 Remotely sensed observations of sea-level anomaly and sea-surface temperature have been assimilated into an implementation of the Miami Isopycnic Coordinate Ocean Model (MICOM) for the Indian Ocean using the Ensemble Kalman Filter (EnKF). The system has been applied in a hindcast validation experiment to examine the properties of the assimilation scheme when used with a full ocean general circulation model and real observations. This work is considered as a first step towards an operational ocean monitoring and forecasting system for the Indian Ocean. The assimilation of real data has demonstrated that the sequential EnKF can efficiently control the model evolution in time. The use of data assimilation requires a significant amount of additional processing and computational resources. However, we have tried to justify the cost of using a sophisticated assimilation scheme by demonstrating strong regional and temporal dependencies of the covariance statistics, which include highly anisotropic and flow-dependent correlation functions. In particular, we observed a marked difference between error statistics in the equatorial region and at off-equatorial latitudes. We have also demonstrated how the assimilation of SLA and SST improves the model fields with respect to real observations. Independent in situ temperature profiles have been used to examine the impact of assimilating the remotely sensed observations. These intercomparisons have shown that the model temperature and salinity fields better resemble in situ observations in the assimilation experiment than in a model free-run case. On the other hand, it is also expected that assimilation of in situ profiles is needed to properly control the deep ocean circulation. Received: 8 January 2002 / Accepted: 8 April 2002  相似文献   

5.
Coupled assimilation for an intermediated coupled ENSO prediction model   总被引：4，自引：0，他引：4  
Fei Zheng  Jiang Zhu 《Ocean Dynamics》2010,60(5):1061-1073
The value of coupled assimilation is discussed using an intermediate coupled model in which the wind stress is the only atmospheric state which is slavery to model sea surface temperature (SST). In the coupled assimilation analysis, based on the coupled wind–ocean state covariance calculated from the coupled state ensemble, the ocean state is adjusted by assimilating wind data using the ensemble Kalman filter. As revealed by a series of assimilation experiments using simulated observations, the coupled assimilation of wind observations yields better results than the assimilation of SST observations. Specifically, the coupled assimilation of wind observations can help to improve the accuracy of the surface and subsurface currents because the correlation between the wind and ocean currents is stronger than that between SST and ocean currents in the equatorial Pacific. Thus, the coupled assimilation of wind data can decrease the initial condition errors in the surface/subsurface currents that can significantly contribute to SST forecast errors. The value of the coupled assimilation of wind observations is further demonstrated by comparing the prediction skills of three 12-year (1997–2008) hindcast experiments initialized by the ocean-only assimilation scheme that assimilates SST observations, the coupled assimilation scheme that assimilates wind observations, and a nudging scheme that nudges the observed wind stress data, respectively. The prediction skills of two assimilation schemes are significantly better than those of the nudging scheme. The prediction skills of assimilating wind observations are better than assimilating SST observations. Assimilating wind observations for the 2007/2008 La Niña event triggers better predictions, while assimilating SST observations fails to provide an early warning for that event.  相似文献   

6.
The ensemble Kalman filter (EnKF) performs well because that the covariance of background error is varying along time. It provides a dynamic estimate of background error and represents the reasonable statistic characters of background error. However, high computational cost due to model ensemble in EnKF is employed. In this study, two methods referred as static and dynamic sampling methods are proposed to obtain a good performance and reduce the computation cost. Ensemble adjustment Kalman filter (EAKF) method is used in a global surface wave model to examine the performance of EnKF. The 24-h interval difference of simulated significant wave height (SWH) within 1 year is used to compose the static samples for ensemble errors, and these errors are used to construct the ensemble states at each time the observations are available. And then, the same method of updating the model states in the EAKF is applied for the ensemble states constructed by a static sampling method. The dynamic sampling method employs a similar method to construct the ensemble states, but the period of the simulated SWH is changing with time. Here, 7 days before and after the observation time is used as this period. To examine the performance of three schemes, EAKF, static, or dynamic sampling method, observations from satellite Jason-2 in 2014 are assimilated into a global wave model, and observations from satellite Saral are used for validation. The results indicate that the EAKF performs best, while the static sampling method is relatively worse. The dynamic sampling method improves an assimilation effect dramatically compared to the static sampling method, and its overall performance is closed to the EAKF. In low latitudes, the dynamic sampling method has a slight advantage over the EAKF. In the dynamic or static sampling methods, only one wave model is required to run and their computational cost is reduced sharply. According to the performance of these three methods, the dynamic sampling method can treated as an effective alternative of EnKF, which could reduce the computational cost and provide a good performance of data assimilation.  相似文献   

7.
The characterization of model errors is an essential step for effective data assimilation into open-ocean and shelf-seas models. In this paper, we propose an experimental protocol to properly estimate the error statistics generated by imperfect atmospheric forcings in a regional model of the Bay of Biscay, nested in a basin-scale North Atlantic configuration. The model used is the Hybrid Coordinate Ocean Model (HYCOM), and the experimental protocol involves Monte Carlo (or ensemble) simulations. The spatial structure of the model error is analyzed using the representer technique, which allows us to anticipate the subsequent impact in data assimilation systems. The results show that the error is essentially anisotropic and inhomogeneous, affecting mainly the model layers close to the surface. Even when the forcings errors are centered around zero, a divergence is observed between the central forecast and the mean forecast of the Monte Carlo simulations as a result of nonlinearities. The 3D structure of the representers characterizes the capacity of different types of measurement (sea level, sea surface temperature, surface velocities, subsurface temperature, and salinity) to control the circulation. Finally, data assimilation experiments demonstrate the superiority of the proposed methodology for the implementation of reduced-order Kalman filters.  相似文献   

8.
While global oceanic surface information with large-scale, real-time, high-resolution data is collected by satellite remote sensing instrumentation, three-dimensional (3D) observations are usually obtained from in situ measurements, but with minimal coverage and spatial resolution. To meet the needs of 3D ocean investigations, we have developed a new algorithm to reconstruct the 3D ocean temperature field based on the Array for Real-time Geostrophic Oceanography (Argo) profiles and sea surface temperature (SST) data. The Argo temperature profiles are first optimally fitted to generate a series of temperature functions of depth, with the vertical temperature structure represented continuously. By calculating the derivatives of the fitted functions, the calculation of the vertical temperature gradient of the Argo profiles at an arbitrary depth is accomplished. A gridded 3D temperature gradient field is then found by applying inverse distance weighting interpolation in the horizontal direction. Combined with the processed SST, the 3D temperature field reconstruction is realized below the surface using the gridded temperature gradient. Finally, to confirm the effectiveness of the algorithm, an experiment in the Pacific Ocean south of Japan is conducted, for which a 3D temperature field is generated. Compared with other similar gridded products, the reconstructed 3D temperature field derived by the proposed algorithm achieves satisfactory accuracy, with correlation coefficients of 0.99 obtained, including a higher spatial resolution (0.25° × 0.25°), resulting in the capture of smaller-scale characteristics. Finally, both the accuracy and the superiority of the algorithm are validated.  相似文献   

9.
An implementation of the Ensemble Kalman filter (EnKF) with a coupled ice–ocean model is presented. The model system consists of a dynamic–thermodynamic ice model using the elastic-viscous-plastic (EVP) rheology coupled with the HYbrid Coordinate Ocean Model (HYCOM). The observed variable is ice concentration from passive microwave sensor data (SSM/I). The assimilation of ice concentration has the desired effect of reducing the difference between observations and model. Comparison of the assimilation experiment with a free-run experiment shows that there are large differences, especially in summer. In winter the differences are relatively small, partly because the atmospheric forcing used to run the model depends upon SSM/I data. The assimilation has the strongest impact close to the ice edge, where it ensures a correct location of the ice edge throughout the simulation. An inspection of the model ensemble statistics reveals that the error estimates of the model are too small in winter, partly a result of too low model ice-concentration variance in the central ice pack. It is found that the ensemble covariance between ice concentration and sea-surface temperature in the same grid cell is of the same sign (negative) throughout the year. The ensemble covariance between ice concentration and salinity is more dependent upon the physical mechanisms involved, with ice transport and freeze/melt giving different signs of the covariances. The ice-transport and ice-melt mechanisms also impact the ice-concentration variance and the covariance between ice concentration and ice thickness. The ensemble statistics show a high degree of complexity, which to some extent merits the use of computationally expensive assimilation methods, such as the Ensemble Kalman filter. The present study focuses on the assimilation of ice concentration, but it is understood that assimilation of other datasets, such as sea-surface temperature, would be beneficial.Responsible Editor: Jin-Song von Storch  相似文献   

10.
Sea surface temperature (SST) from a near real-time data set produced from satellites data has been assimilated into a coupled ice–ocean forecasting model (Canadian East Coast Ocean Model) using an efficient data assimilation method. The method is based on an optimal interpolation scheme by which SST is melded into the model through the adjustment of surface heat flux. The magnitude and space–time variation of the adjustment depend on the depth of heat diffusion into the water column in response to changes in surface flux, the correlation time scale of the data, and model and data errors. The diffusion depth is scaled by the eddy diffusivity for temperature. The ratio of the model and data errors is treated as an adjustable parameter. To evaluate the quality of the assimilation, the results from the model with and without assimilation are compared to independent ship data from the Atlantic Zone Monitoring Program and the World Ocean Circulation Experiment. It is shown that the assimilation has a significant impact on the modeled SST, reducing the root mean square difference (RMSD) between the model SST and the ship SST by 0.63°C or 37%. The RMSD of the assimilated SST is smaller than that of the satellite SST by 0.23°C. This suggests that model simulations or predictions with data assimilation can provide the best estimate of the true SST. A sensitivity study is performed to examine the change of the model RMSD with the adjustable parameter in the assimilation equation. The results show that there is an optimal value of the parameter and the model SST is not very sensitive to the parameter.  相似文献   

11.
The Mediterranean Forecasting System (MFS) has been operational for a decade, and is continuously providing forecasts and analyses for the region. These forecasts comprise local- and basin-scale information of the environmental state of the sea and can be useful for tracking oil spills and supporting search-and-rescue missions. Data assimilation is a widely used method to improve the forecast skill of operational models and, in this study, the three-dimensional variational (OceanVar) scheme has been extended to include Argo float trajectories, with the objective of constraining and ameliorating the numerical output primarily in terms of the intermediate velocity fields at 350 m depth. When adding new datasets, it is furthermore crucial to ensure that the extended OceanVar scheme does not decrease the performance of the assimilation of other observations, e.g., sea-level anomalies, temperature, and salinity. Numerical experiments were undertaken for a 3-year period (2005–2007), and it was concluded that the Argo float trajectory assimilation improves the quality of the forecasted trajectories with ~15%, thus, increasing the realism of the model. Furthermore, the MFS proved to maintain the forecast quality of the sea-surface height and mass fields after the extended assimilation scheme had been introduced. A comparison between the modeled velocity fields and independent surface drifter observations suggested that assimilating trajectories at intermediate depth could yield improved forecasts of the upper ocean currents.  相似文献   

12.
A method to initialize an ensemble, introduced by Evensen (Physica, D 77:108–129, 1994a; J Geophys Res 99(C5):10143–10162, 1994b; Ocean Dynamics 53:343–367, 2003), was applied to the Ocean General Circulation Model (OGCM) HYbrid Coordinate Ocean Model (HYCOM) for the Pacific Ocean. Taking advantage of the hybrid coordinates, an initial ensemble is created by first perturbing the layer interfaces and then running the model for a spin-up period of 1 month forced by randomly perturbed atmospheric forcing fields. In addition to the perturbations of layer interfaces, we implemented perturbations of the mixed layer temperatures. In this paper, we investigate the quality of the initial ensemble generated by this scheme and the influence of the horizontal decorrelation scale and vertical correlation on the statistics of the resulting ensemble. We performed six ensemble generation experiments with different combinations of horizontal decorrelation scales and with/without perturbations in the mixed layer. The resulting six sets of initial ensembles are then analyzed in terms of sustainability of the ensemble spread and realism of the correlation patterns. The ensemble spreads are validated against the difference between model and observations after 20 years of free run. The correlation patterns of six sets of ensemble are compared to each other. This study shows that the ensemble generation scheme can effectively generate an initial ensemble whose spread is consistent with the observed errors. The correlation pattern of the ensemble also exhibits realistic features. The addition of mixed layer perturbations improves both the spread and correlation. Some limitations of the ensemble generation scheme are also discussed. We found that the vertical shift of isopycnal coordinates provokes unrealistically large deviations in shallow layers near the islands of the West Pacific. A simple correction circumvents the problem.
Liying WanEmail:
  相似文献   

13.
A coupled ocean–atmosphere mesoscale ensemble prediction system has been developed by the Naval Research Laboratory. This paper describes the components and implementation of the system and presents baseline results from coupled ensemble simulations for two tropical cyclones. The system is designed to take into account major sources of uncertainty in: (1) non-deterministic dynamics, (2) model error, and (3) initial states. The purpose of the system is to provide mesoscale ensemble forecasts for use in probabilistic products, such as reliability and frequency of occurrence, and in risk management applications. The system components include COAMPS® (Coupled Ocean/Atmosphere Mesoscale Prediction System) and NCOM (Navy Coastal Ocean Model) for atmosphere and ocean forecasting and NAVDAS (NRL Atmospheric Variational Data Assimilation System) and NCODA (Navy Coupled Ocean Data Assimilation) for atmosphere and ocean data assimilation. NAVDAS and NCODA are 3D-variational (3DVAR) analysis schemes. The ensembles are generated using separate applications of the Ensemble Transform (ET) technique in both the atmosphere (for moving or non-moving nests) and the ocean. The atmospheric ET is computed using wind, temperature, and moisture variables, while the oceanographic ET is derived from ocean current, temperature, and salinity variables. Estimates of analysis error covariance, which is used as a constraint in the ET, are provided by the ocean and atmosphere 3DVAR assimilation systems. The newly developed system has been successfully tested for a variety of configurations, including differing model resolution, number of members, forecast length, and moving and fixed nest options. Results from relatively coarse resolution (～27-km) ensemble simulations of Hurricanes Hanna and Ike demonstrate that the ensemble can provide valuable uncertainty information about the storm track and intensity, though the ensemble mean provides only a small amount of improved predictive skill compared to the deterministic control member.  相似文献   

14.
This paper investigates the feasibility of an ocean data assimilation system to analyze the salinity variability associated with the barrier layer in the equatorial Pacific. In order to validate reproducibility of the temperature and salinity fields, we perform an assimilation run where some temperature and salinity observations by TRITON buoys and Argo floats are withheld. The assimilation run reproduces interannual variability of salinity in the equatorial Pacific exhibited in the data that are withheld. Statistics shows that salinity values and variations in the assimilation run are closer to the data than the climatology and in the model free run. We also confirm that zonal currents in the equatorial Pacific in the reanalysis, where all available temperature and salinity data are assimilated, are consistent with an observation-based mapping and the data of the Acoustic Doppler Current Profiler mounted on TAO buoys. Variability of the barrier layer and relevant salinity field in the reanalysis is consistent with former studies. A thick barrier layer area generally exists west of the equatorial salinity front and is displaced zonally with the migration of the front in the response to El Niño-Southern Oscillation, although the area moved to the east over the front in the 1997 El Niño. It is confirmed that the barrier layer thickness is closely correlated with the near-surface temperature in the equatorial Pacific.  相似文献   

15.
A new 3DVAR-based Ocean Variational Analysis System (OVALS) is developed. OVALS is capable of assimilating in situ sea water temperature and salinity observations and satellite altimetry data. As a component of OVALS, a new variational scheme is proposed to assimilate the sea surface height data. This scheme considers both the vertical correlation of background errors and the nonlinear temperature-salinity relationship which is derived from the generalization of the linear balance constraints to the nonlinear in the 3DVAR. By this scheme, the model temperature and salinity fields are directly adjusted from the altimetry data. Additionally, OVALS can assimilate the temperature and salinity profiles from the ARGO floats which have been implemented in recent years and some temperature and salinity data such as from expendable bathythermograph, moored ocean buoys, etc. A 21-year assimilation experiment is carried out by using OVALS and the Tropical Pacific circulation model. The results show that the assimilation system may effectively improve the estimations of temperature and salinity by assimilating all kinds of observations. Moreover, the root mean square errors of temperature and salinity in the upper depth less than 420 m reach 0.63℃ and 0.34 psu.  相似文献   

16.
Four existing sea surface temperature (SST) assimilation schemes are evaluated in terms of their performances in assimilating the advanced very high resolution radiometer pathfinder best SST data in the South China Sea using the Princeton Ocean Model. Schemes 1 and 2 project SST directly to subsurface according to model-based correlations between SST and subsurface temperature. The difference between these two schemes is related to the order of vertical projection and horizontal optimal interpolation (OI). In Scheme 1, the spatially non-uniform SST observations are first projected to subsurface levels, followed by horizontal OI at each level. While in Scheme 2, the remotely sensed SSTs are first optimally interpolated to all grid points at the surface, followed by projecting gridded SSTs to subsurface levels. Scheme 3 assumes that the mixed layer is well mixed and has a uniform temperature vertically. In Scheme 4, SST is propagated to subsurface levels using a linear relationship of temperature between any two neighboring depths (Scheme 4a) or between surface and subsurface (Scheme 4b), which is derived by empirical orthogonal function (EOF) technique. To verify the results of the four schemes, the authors use the hydrographic data from two cruises during the South China Sea Monsoon Experiment in April and June 1998. It was shown that all four schemes could improve the SST field by reducing about 50% of the root mean square errors (RMSEs). All but Scheme 3 can improve model thermocline structure that is too diffused otherwise, though the RMSEs increase in the thermocline, especially for Scheme 2 when the model has opposite bias between upper layers and lower layers. Scheme 3 fails in the subsurface depth by increasing the thermocline depth, especially when there is a cold model bias. Projecting SST downward by EOF technique can deepen the depth of assimilation especially in Scheme 4a. Both Schemes 4a and b can correct the bias in the mixed layer and do not change the vertical thermal structure.  相似文献   

17.
The effectiveness of an ensemble Kalman filter (EnKF) is assessed in the Selat Pauh of Singapore using observing system simulation experiment. Perfect model experiments are first considered. The perfect model experiments examine the EnKF in reducing the initial perturbations with no further errors than those in the initial conditions. Current velocity at 15 observational sites from the true ocean is assimilated every hour into the false ocean. While EnKF reduces the initial velocity error during the first few hours, it fails after one tidal cycle (approximately 12 h) due to the rapid convergence of the ensemble members. Successively, errors are introduced in the surface wind forcing. A random perturbation ε is applied independently to each ensemble member to maintain the ensemble spread. The assimilation results showed that the success of EnKF depends critically on the presence of ε, yet it is not sensitive to the magnitude of ε, at least in the range of weak to moderate perturbations. Although all experiments were made with EnKF only, the results could be applicable in general to all other ensemble-based data assimilation methods.  相似文献   

18.
This study presents a soil moisture assimilation scheme, which could assimilate microwave brightness temperature directly, based on the ensemble Kalman filter and the shuffled complex evolution method (SCE-UA). It uses the soil water model of the land surface model CLM3.0 as the forecast operator, and a radiative transfer model (RTM) as the observation operator in the assimilation system. The assimilation scheme is implemented in two phases: the parameter calibration phase and the pure soil moisture assimilation phase. The vegetation optical thickness and surface roughness parameters in the RTM are calibrated by SCE-UA method and the optimal parameters are used as the final model parameters of the observation operator in the assimilation phase. The ideal experiments with synthetic data indicate that this scheme could significantly improve the simulation of soil moisture at the surface layer. Furthermore, the estimation of soil moisture in the deeper layers could also be improved to a certain extent. The real assimilation experiments with AMSR-E brightness temperature at 10.65 GHz (vertical polarization) show that the root mean square error (RMSE) of soil moisture in the top layer (0–10 cm) by assimilation is 0.03355 m3 · m−3, which is reduced by 33.6% compared with that by simulation (0.05052 m3 · m−3). The mean RMSE by assimilation for the deeper layers (10–50 cm) is also reduced by 20.9%. All these experiments demonstrate the reasonability of the assimilation scheme developed in this study.  相似文献   

19.
The local ensemble transform Kalman filter (LETKF) is implemented with the Weather Research and Forecasting (WRF) model, and real observations are assimilated to assess the newly-developed WRF-LETKF system. The WRF model is a widely-used mesoscale numerical weather prediction model, and the LETKF is an ensemble Kalman filter (EnKF) algorithm particularly efficient in parallel computer architecture. This study aims to provide the basis of future research on mesoscale data assimilation using the WRF-LETKF system, an additional testbed to the existing EnKF systems with the WRF model used in the previous studies. The particular LETKF system adopted in this study is based on the system initially developed in 2004 and has been continuously improved through theoretical studies and wide applications to many kinds of dynamical models including realistic geophysical models. Most recent and important improvements include an adaptive covariance inflation scheme which considers the spatial and temporal inhomogeneity of inflation parameters. Experiments show that the LETKF successfully assimilates real observations and that adaptive inflation is advantageous. Additional experiments with various ensemble sizes show that using more ensemble members improves the analyses consistently.  相似文献   

20.
Application of altimetry data assimilation on mesoscale eddies simulation   总被引：3，自引：0，他引：3  
Mesoscale eddy plays an important role in the ocean circulation. In order to improve the simulation accuracy of the mesoscale eddies, a three-dimensional variation (3DVAR) data assimilation system called Ocean Variational Analysis System (OVALS) is coupled with a POM model to simulate the mesoscale eddies in the Northwest Pacific Ocean. In this system, the sea surface height anomaly (SSHA) data by satellite altimeters are assimilated and translated into pseudo temperature and salinity (T-S) profile data. Then, these profile data are taken as observation data to be assimilated again and produce the three-dimensional analysis T-S field. According to the characteristics of mesoscale eddy, the most appropriate assimilation parameters are set up and testified in this system. A ten years mesoscale eddies simulation and comparison experiment is made, which includes two schemes: assimilation and non-assimilation. The results of comparison between two schemes and the observation show that the simulation accuracy of the assimilation scheme is much better than that of non-assimilation, which verified that the altimetry data assimilation method can improve the simulation accuracy of the mesoscale dramatically and indicates that it is possible to use this system on the forecast of mesoscale eddies in the future.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号