共查询到20条相似文献，搜索用时 46 毫秒
1.
We have used Stanford magnetic field maps to construct distributions of longitudinal magnetic field gradients in the neighbourhood of polarity inversion lines. The distributions were constructed with proper account of the type of the polarity inversion lines and of the existence or absence of dark filaments above them. It is shown that for polarity inversion lines that pass inside active regions or on their boundary, grad BII distributions for portions of the lines with persisting filament are shifted toward lower values of gradient as compared with grad BII distributions for portions of the lines without filaments. The influence of the spatial resolution of the magnetograms upon polarity inversion line characteristics is discussed. 相似文献
2.
Solar filaments show the position of large-scale polarity-inversion lines and are used for the reconstruction of large-scale
solar magnetic field structure on the basis of Hα synoptic charts for the periods that magnetographic measurements are not
available. Sometimes crossing filaments are seen in Hα filtergrams. We analyze daily Hα filtergrams from the archive of Big
Bear Solar Observatory for the period of 1999 – 2003 to find crossing and interacting filaments. A number of examples are
presented and filament patterns are compared with photospheric magnetic field distributions. We have found that all crossing
filaments reveal quadrupolar magnetic configurations of the photospheric field and presume the presence of null points in
the corona. 相似文献
3.
A three-dimensional coronal magnetic field is reconstructed for the NOAA active region 11158 on 14 February 2011. A GPU-accelerated direct boundary integral equation (DBIE) method is implemented which is approximately 1000 times faster than the original DBIE used on solar non-linear force-free field modeling. Using the SDO/HMI vector magnetogram as the bottom boundary condition, the reconstructed magnetic field lines are compared with the projected EUV loop structures as observed in the front-view (SDO/AIA) and the side-view (STEREO-A/B) images for the first time; they show very good agreement three-dimensionally. A quantitative comparison with some stereoscopically reconstructed coronal loops shows that the average misalignment angles in our model are at the same order as the state-of-the-art results obtained from reconstructed coronal loops. It is found that the observed coronal loop structures can be grouped into a number of closed and open field structures with some central bright coronal loop features around the polarity inversion line. The reconstructed highly sheared magnetic field lines agree very well with the low-lying sigmoidal filament along the polarity inversion line. This central low-lying magnetic field loop system must have played a key role in powering the flare. It should be noted that while a strand-like coronal feature along the polarity inversion line may be related to the filament, one cannot simply interpret all the coronal bright features along the polarity inversion line as manifestation of the filament without any stereoscopic information. 相似文献
4.
Rakesh Mazumder 《天文和天体物理学研究(英文版)》2019,(6):43-50
A filament is a cool, dense structure suspended in the solar corona. The eruption of a filament is often associated with a coronal mass ejection(CME), which has an adverse effect on space weather. Hence,research on filaments has attracted much attention in the recent past. The tilt angle of active region(AR)magnetic bipoles is a crucial parameter in the context of the solar dynamo, which governs the conversion efficiency of the toroidal magnetic field to poloidal magnetic field. Filaments always form over polarity inversion lines(PILs), so the study of tilt angles for these filaments can provide valuable information about generation of a magnetic field in the Sun. We investigate the tilt angles of filaments and other properties using McIntosh Archive data. We fit a straight line to each filament to estimate its tilt angle. We examine the variation of mean tilt angle with time. The latitude distribution of positive tilt angle filaments and negative tilt angle filaments reveals that there is a dominance of positive tilt angle filaments in the southern hemisphere and negative tilt angle filaments dominate in the northern hemisphere. We study the variation of the mean tilt angle for low and high latitudes separately. Investigations of temporal variation with filament number indicate that total filament number and low latitude filament number vary cyclically, in phase with the solar cycle. There are fewer filaments at high latitudes and they also show a cyclic pattern in temporal variation. We also study the north-south asymmetry of filaments with different latitude criteria. 相似文献
5.
The formation and eruption of active region filaments is supposed to be caused by the increase of a concentrated current embedded in the active region background magnetic field of an active region according to the theory of Van Tend and Kuperus (1978).The onset of a filament eruption is due to either changes in the background magnetic field or the increase of the filament current intensity. Both processes can be caused by the emergence of new magnetic flux as well as by the motion of the photospheric footpoints of the magnetic field lines. It is shown that if the background field evolves from a potential field to a nearly force-free field the vertical equilibrium of the current filament is not affected, but large forces are generated along the filament axis. This is identified as the cause of filament activation and the increase in filament turbulence during the flare build-up phase. Depending on the evolution of the background field and the current filament, two different scenarios for flare build-up and filament eruption are distinguished.This work was done while one of the authors (M.K.) was participating in the CECAM workshop on Physics of Solar Flares held at Orsay, France, in June 1979. 相似文献
6.
We present a new method to automatically track filaments over the solar disk. The filaments are first detected on Meudon Spectroheliograph Hα images of the Sun, applying the technique developed by Fuller, Aboudarham, and Bentley (Solar Phys. 227, 61, 2005). This technique combines cleaning processes, image segmentation based on region growing, and morphological parameter extraction, including the determination of filament skeletons. The coordinates of the skeleton pixels, given in a heliocentric system, are then converted to a more appropriate reference frame that follows the rotation of the Sun surface. In such a frame, a co-rotating filament is always located around the same position, and its skeletons (extracted from each image) are thus spatially close, forming a group of adjacent features. In a third step, the shape of each skeleton is compared with its neighbours using a curve-matching algorithm. This step will permit us to define the probability [P] that two close filaments in the co-rotating frame are actually the same one observed on two different images. At the end, the pairs of features, for which the corresponding probability is greater than a threshold value, are associated using tracking identification indices. On a representative sample of filaments, the good agreement between automated and manual tracking confirms the reliability of the technique to be applied on large data sets. This code is already used in the framework of the Heliophysics Integrated Observatory (HELIO) to populate a catalogue dedicated to solar and heliospheric features (HFC). An extension of this method to other filament observations, and possibly sunspots, faculae, and coronal-holes tracking, can also be envisaged. 相似文献
7.
In this paper, three-dimensional linear force-free field configurations that can be associated with filaments are considered. It is assumed that the field configurations are suitable to represent filaments if they contain magnetic dips. With the photospheric flux distribution chosen to be an arcade with a dextral/sinistral axial component, it is found that dipped configurations exist only for large values of alpha (where, ×B=B). The dips always lie above the polarity inversion line in the centre of the channel between the flux regions. When the dips are viewed from above to a depth of 1 Mm they resemble closely the shape of filaments viewed in absorption on the solar disk. As the magnitude of alpha increases, the horizontal and vertical extent of the dips also increases, giving active-region filaments for low values of alpha and quiescient filaments for high values of alpha. Dextral filaments only form for negative values of alpha and sinistral filaments for positive values of alpha. The portion of the field line that is dipped is always of inverse polarity and the magnitude of the field in the dipped region increases with height, both of which are consistent with Leroy, Bommier, and Sahal-Bréchot (1983). Overlying the region of dips there are arcades of normal polarity which have the correct left-bearing/right-bearing orientation for dextral/sinistral filaments. When the hypothesis of barbs occurring in dipped field lines is used, barbs that branch out of the main axis and to the right/left for dextral/sinistral filaments can be formed around minority polarity elements on either side of the polarity inversion line. No barbs are found around normal polarity elements. The model reproduces many of the observed features of filament channels, filaments and their barbs. 相似文献
8.
We propose a new model for the initiation of solar coronal mass ejections (CMEs) and CME-associated flares. The model is inferred from observations of a quiescent filament eruption in the north-western quadrant of the solar disk on 4 September 2000. The event was observed with the Siberian Solar Radio Telescope (5.7 GHz), the Nobeyama Radioheliograph (17 GHz) and SOHO/EIT and LASCO. Based on the observations, we suggest that the eruption could be caused by the interaction of two dextral filaments. According to our model, these two filaments merge together to form a dual-filament system tending to form a single long filament. This results in a slow upward motion of the dual-filament system. Its upward expansion is prevented by the attachment of the filaments to the photosphere by filament barbs as well as by overlying coronal arcades. The initial upward motion is caused by the backbone magnetic field (first driving factor) which connects the two merging filaments. Its magnetic flux increases slowly due to magnetic reconnection of the cross-interacting legs of these filaments. If a total length of the dual-filament system is large enough, then the filament barbs detach themselves from the solar surface due to magnetic reconnection between the barbs with oppositely directed magnetic fields. The detachment of the filament barbs completes the formation of the eruptive filaments themselves and determines the helicity sign of their magnetic fields. The appearance of a helical magnetic structure creates an additional upward-directed force (second driving factor). A combined action of these two factors causes acceleration of the dual-filament system. If the lifting force of the two factors is sufficient to substantially extend the overlying coronal magnetic arcade, then magnetic reconnection starts below the eruptive filament in accordance with the classical scheme, and the third driving factor comes into play. 相似文献
9.
The coronal magnetic field is the primary driver of solar dynamic events. Linear and circular polarization signals of certain infrared coronal emission lines contain information about the magnetic field, and to access this information either a forward or an inversion method must be used. We study three coronal magnetic configurations that are applicable to polar-crown filament cavities by doing forward calculations to produce synthetic polarization data. We analyze these forward data to determine the distinguishing characteristics of each model. We conclude that it is possible to distinguish between cylindrical flux ropes, spheromak flux ropes, and sheared arcades using coronal polarization measurements. If one of these models is found to be consistent with observational measurements, it will mean positive identification of the magnetic morphology that surrounds certain quiescent filaments, which will lead to a better understanding of how they form and why they erupt. 相似文献
10.
In this paper we seek the origin of the axial component of the magnetic field in filaments by adapting theory to observations.
A previous paper (Mackay, Gaizauskas, and van Ballegooijen, 2000) showed that surface flows acting on potential magnetic fields
for 27 days – the maximum time between the emergence of magnetic flux and the formation of large filaments between the resulting
activity complexes – cannot explain the chirality or inverse polarity nature of the observed filaments. We show that the inclusion
of initial helicity, for which there is observational evidence, in the flux transport model results in sufficiently strong
dextral fields of inverse polarity to account for the existence and length of an observed filament within the allotted time.
The simulations even produce a large length of dextral chirality when just small amounts of helicity are included in the initial
configuration. The modeling suggests that the axial field component in filaments can result from a combination of surface
(flux transport) and sub-surface (helicity) effects acting together. Here surface effects convert the large-scale helicity
emerging in active regions into a smaller-scale magnetic-field component parallel to the polarity inversion line so as to
form a magnetic configuration suitable for a filament. 相似文献
11.
The 180-degree ambiguity in magnetic field direction along polarity reversal boundaries can be resolved often and reliably
by the chiral method. The chiral method requires (1) identification of the chirality of at least one solar feature related
to a polarity reversal boundary along which the field direction is sought and (2) knowledge of the polarity of the network
magnetic field on at least one side of the polarity reversal boundary. In the context of the Sun, chirality is an observable
signature of the handedness of the magnetic field of a solar feature. We concentrate on how to determine magnetic field direction
from chirality definitions and illustrate the technique in eight examples. The examples cover the spectrum of polarity boundaries
associated with filament channels and filaments ranging from those connected with active regions to those on the quiet Sun.
The applicability of the chiral method to all categories of filaments supports the view that active region filaments and quiescent
filaments are the extreme ends in a continuous spectrum of filaments.
The chiral method is almost universally applicable because many types of solar features that reveal chirality are now readily
seen in solar images accessible over the World Wide Web; also there are clear differences between left-handed and right-handed
solar structures that can be identified in both high- and low-resolution data although high-resolution images are almost always
preferable. In addition to filaments and filament channels, chirality is identifiable in coronal loop systems, flare loop
systems, sigmoids, some sunspots, and some erupting prominences. Features other than filament channels and filaments can be
used to resolve the 180-degree ambiguity because there is a one-to-one relationship between the chiralities of all features
associated with a given polarity reversal boundary.
Y. Lin is now at the Institute of Theoretical Astrophysics, University of Oslo. 相似文献
12.
We develop a simple model to explain the non-radial motion of eruptive solar filaments under solar minimum conditions. The global magnetic field is derived from the first and third components of the spherical harmonic expansion of a magnetic scalar potential. The filament is modeled as a toroidal current located above the mid-latitude polarity inversion line. We investigate the stability of the filament against changes in the filament current and attempt to explain the non-radial motion and acceleration of the eruptive filament. We also discuss the limitations of this model. 相似文献
13.
A large filament was observed during a multi-wavelength coordinated campaign on June 19, 1998 in the Hα line with the Swedish Vacuum Solar Telescope (SVST) at La Palma, in the coronal lines Fe ix/x 171 Å and Fe xi 195 Å with the Transition Region and Coronal Explorer (TRACE) and in EUV lines with the SOHO/CDS spectrometer and the hydrogen Lyman series with the SOHO/SUMER spectrometer. Because of its high-latitude location, it is possible to disentangle the physical properties of the Hα filament and the filament channel seen in EUV lines. TRACE images point out a dark region fitting the Hα fine-structure threads and a dark corridor (filament channel), well extended south of the magnetic inversion line. A similar pattern is observed in the CDS EUV-line images. The opacity of the hydrogen and helium resonance continua at 171 Å is almost two orders of magnitude lower than that at the Hi head (912 Å) and thus similar to the opacity of the Hα line. Since we do not see the filament channel in Hα, this would imply that it should also be invisible in TRACE lines. Thus, the diffuse dark corridor is interpreted as due to the coronal ‘volume blocking’ by a cool plasma which extends to large altitudes. Such extensions were also confirmed by computing the heights from the projection geometry and by simulations of the CDS and TRACE line intensities using the spectroscopic model of EUV filaments (Heinzel, Anzer, and Schmieder, 2003). Finally, our NLTE analysis of selected hydrogen Lyman lines observed by SUMER also leads to a conclusion that the dark filament channel is due to a presence of relatively cool plasma having low densities and being distributed at altitudes reaching the Hα filament. 相似文献
14.
Brigitte Schmieder Nicole Mein Yuanyong Deng Cristiana Dumitrache Jean-Marie Malherbe Joachim Staiger E. E. Deluca 《Solar physics》2004,223(1):119-141
This paper is focused on the formation of two filaments in a complex center of decaying active regions (AR 8329 and AR 8326), located in the northern hemisphere. The observations were obtained in Hα by the Multi-channel Subtractive Double Pass spectrograph (MSDP mounted on the German telescope VTT in Tenerife) and EUV lines with TRACE (Transition Region And Corona Explorer). High Doppler shifts are found to be related to the ends of filament segments where canceling magnetic fields are also located (as seen on magnetograms from Big Bear Solar Observatory). At these locations, velocities along the line of sight, derived by using a cloud model method reach −20 km s−1, the segments of filaments merge and frequently a time-related sub-flare is observed by TRACE. The chirality of the filament segments has been determined by different methods: the segments of dextral chirality join together and form a long dextral filament, and a single filament of sinistral chirality forms end to end with the dextral filament but does not merge with it. Assuming a model of twisted flux tube for filament material, we suggest that the dextral filament has negative helicity and a relationship between its formation and the close by sunspot with the same sign of helicity. 相似文献
15.
Solar filaments/prominences exhibit rotational motion during different phases of their evolution from their formation to eruption. We have observed the rotational/vortical motion in the photosphere near the ends of ten filaments during their initial phase of eruption, at the onset of the fast rise phase. All the filaments were associated with active regions. The photospheric vortical motions we observed lasted for 4?–?20 minutes. In the vicinity of the conjugate ends of the filament the direction of rotation was opposite, except for two cases, where rotational motion was observed at only one end point. The sudden onset of a large photospheric vortex motion could have played a role in destabilizing the filament by transporting axial flux into the activated filament thereby increasing the outward magnetic pressure in it. The outward magnetic pressure may have pushed the filament/flux rope to the height where the torus instability criterion was satisfied, and hence it could have caused the filament instability and eruption. 相似文献
16.
Brigitte Schmieder Nicole Mein Yuanyong Deng Cristiana Dumitrache Jean-Marie Malherbe Joachim Staiger E. E. Deluca 《Solar physics》2004,223(1-2):119-141
This paper is focused on the formation of two filaments in a complex center of decaying active regions (AR 8329 and AR 8326), located in the northern hemisphere. The observations were obtained in Hα by the Multi-channel Subtractive Double Pass spectrograph (MSDP mounted on the German telescope VTT in Tenerife) and EUV lines with TRACE (Transition Region And Corona Explorer). High Doppler shifts are found to be related to the ends of filament segments where canceling magnetic fields are also located (as seen on magnetograms from Big Bear Solar Observatory). At these locations, velocities along the line of sight, derived by using a cloud model method reach −20 km s−1, the segments of filaments merge and frequently a time-related sub-flare is observed by TRACE. The chirality of the filament segments has been determined by different methods: the segments of dextral chirality join together and form a long dextral filament, and a single filament of sinistral chirality forms end to end with the dextral filament but does not merge with it. Assuming a model of twisted flux tube for filament material, we suggest that the dextral filament has negative helicity and a relationship between its formation and the close by sunspot with the same sign of helicity. 相似文献
17.
Recent observations of Martin, Bilimoria, and Tracadas (1995) have revealed two new magnetic and structural classes for solar filaments and filament channels. The magnetic classes are called sinistral and dextral, while the structural classes are left-bearing and right-bearing. Dextral filaments dominate in the northern hemisphere and sinistral in the southern. A model consistent with the observations is developed with magnetic sources that represent the network flux on both sides of the channel and extra concentrations of flux that produce the strong field component along the channel. We suggest that it is the imbalance of flux locations along the channel that creates the field of a filament channel. The resulting separatrix surfaces have distinct upper and lower boundaries that may produce the upper boundary of the filament cavity or filament and the lower boundary of the filament. The model is applied to a specific filament channel, with discrete sources and sinks that represent the flux observed in a photospheric magnetogram. The resulting three-dimensional field lines near the filament location are low-lying and possess dips. 相似文献
18.
Observational conditions for the formation and maintenance of filaments are reviewed since 1989 in the light of recent findings
on their structure, chirality, inferred magnetic topology, and mass flows. Recent observations confirm the necessary conditions
previously cited: (1) their location at a boundary between opposite-polarity magnetic fields (2) a system of overlying coronal
loops, (3) a magnetically-defined channel beneath, (4) the convergence of the opposite-polarity network magnetic fields towards
their common boundary within the channel and (5) cancellation of magnetic flux at the common polarity boundary. Evidence is
put forth for three additional conditions associated with fully developed filaments: (A) field-aligned mass flows parallel
with their fine structure (B) a multi-polar background source of small-scale magnetic fields necessary for the formation of
the filament barbs and (C) a handedness property known as chirality which requires them to be either of two types, dextral
or sinistral. One-to-one relationships have been established between the chirality of filaments and the chirality of their
filament channels and overlying coronal arcades. These findings reinforce earlier evidence that every filament magnetic field
is separate from the magnetic field of the overlying arcade but both are parts of a larger magnetic field system. The larger
system has at least quadrupolar footprints in the photosphere and includes the filament channel and subphotospheric magnetic
fields, This ‘systems’ view of filaments and their environment enables new perspectives on why arcades and channels are invariable
conditions for their existence.
Supplementary material to this paper is available in electronic form at http://dx.doi.org/10.1023/A:1005026814076 相似文献
19.
Solar filaments exhibit a range of eruptive-like dynamic activity from the full, or partial, eruption of the filament mass
and surrounding magnetic structure, as a CME, to a fully confined dynamic evolution or “failed” eruption, sometimes producing
a flare but no CME. Additionally, observations of erupting filaments often show a clear helical structure, indicating the
presence of a magnetic flux rope. Dynamic helical structures, in addition to being twisted, frequently show evidence of being
kinked, with the axis of the flux rope exhibiting a large-scale writhe. Motivated by the fact that kinking motions are also
detected in filaments that fail to erupt, we investigate the possible relationship between the kinking of a filament and its
success or failure to erupt. We present an analysis of kinking in filaments and its implications for other filament phenomena
such as the nature of the eruption, eruptive acceleration, and post-eruptive re-formation. We elucidate the relationship between
kinking and the various filament phenomena via a simple physical picture of the forces involved in kinking together with specific
definitions of the types of filament eruption. The present study offers results directly applicable to observations, allowing
a thorough exploration of the implications of the observational relationship between kinking and filament phenomena and provides
new insight for modelers of CME initiation. 相似文献
20.
We study the topology of the 3D magnetic field in a filament channel to address the following questions: Is a filament always formed in a single flux tube? How does the photospheric magnetic field lead to filament interruptions and to feet formation? What is the relation between feet-related field lines and the parasitic polarities? What can topological analyses teach us about EUV filament channels? To do so, we consider a filament observed on 6 October 2004 with THEMIS/MTR, in Hα with the full line profile simultaneously and cospatially with its photospheric vector magnetic field. The coronal magnetic field was calculated from a “linear magnetohydrostatic” extrapolation of a composite THEMIS-MDI magnetogram. Its free parameters were adjusted to get the best match possible between the distribution of modeled plasma-supporting dips and the Hα filament morphology. The model results in moderate plasma β≤1 at low altitudes in the filament, in conjunction with non-negligible departures from force-freeness measured by various metrics. The filament here is formed by a split flux tube. One part of the flux tube is rooted in the photosphere aside an observed interruption in the filament. This splitted topology is due to strong network polarities on the edge of the filament channel, not to flux concentrations closer to the filament. We focus our study to the northwest portion of the filament. The related flux tube is highly fragmented at low altitudes. This fragmentation is due to small flux concentrations of two types. First, some locally distort the tube, leading to noticeable thickness variations along the filament body. Second, parasitic polarities, associated with filament feet, result in secondary dips above the related local inversion line. These dips belong to long field lines that pass below the flux tube. Many of these field lines are not rooted near the related foot. Finally, the present model shows that the coronal void interpretation cannot be ruled out to interpret the wideness of EUV filament channels. 相似文献