共查询到20条相似文献，搜索用时 31 毫秒
1.
3D city models are widely used in many disciplines and applications, such as urban planning, disaster management, and environmental simulation. Usually, the terrain and embedded objects like buildings are taken into consideration. A consistent model integrating these elements is vital for GIS analysis, especially if the geometry is accompanied by the topological relations between neighboring objects. Such a model allows for more efficient and errorless analysis. The memory consumption is another crucial aspect when the wide area of a city is considered – light models are highly desirable. Three methods of the terrain representation using the geometrical–topological data structure – the dual half-edge – are proposed in this article. The integration of buildings and other structures like bridges with the terrain is also presented. 相似文献
2.
3维GIS面向对象数据模型的研究与应用 总被引：5，自引：2，他引：5
3维数据模型是3维GIS研究中亟待解决的一个核心问题。在充分分析现有3维数据模型的基础上，从实际应用出发，针对传统模型的不足，提出1种3维GIS面向对象数据模型，以解决空间不规则实体本身，以及实体间复杂关系的描述、表达和组织等关键问题，并给出此模型应用实例，证明此模型的可行性和实用性。 相似文献
3.
4.
Estimates of solar radiation distribution in urban areas are often limited by the complexity of urban environments. These limitations arise from spatial structures such as buildings and trees that affect spatial and temporal distributions of solar fluxes over urban surfaces. The traditional solar radiation models implemented in GIS can address this problem only partially. They can be adequately used only for 2‐D surfaces such as terrain and rooftops. However, vertical surfaces, such as facades, require a 3‐D approach. This study presents a new 3‐D solar radiation model for urban areas represented by 3‐D city models. The v.sun module implemented in GRASS GIS is based on the existing solar radiation methodology used in the topographic r.sun model with a new capability to process 3‐D vector data representing complex urban environments. The calculation procedure is based on the combined vector‐voxel approach segmenting the 3‐D vector objects to smaller polygon elements according to a voxel data structure of the volume region. The shadowing effects of surrounding objects are considered using a unique shadowing algorithm. The proposed model has been applied to the sample urban area with results showing strong spatial and temporal variations of solar radiation flows over complex urban surfaces. 相似文献
5.
一种便捷的城市三维景观可视化方法 总被引：1，自引：1，他引：0
本文提出了基于城市CAD地形图和高分辨率遥感影像的城市景观三维建模方法。利用建筑物的多边形和层数属性,在二维GIS软件中以建筑物多边形为底、层数乘以每层高度为高,生成立柱体。再把立柱体和正射影像投影到DEM上,得到城市三维景观模型。本研究以南京市新街口地区为例,实验结果表明,该方法是一条经济而高效的城市景观三维可视化途径,可广泛应用在城市GIS的相关研究中。 相似文献
6.
7.
地震损毁建筑物的高分辨率SAR图像模拟与分析 总被引：2，自引：0，他引：2
为了分析汶川地震震后高分辨率合成孔径(SAR)图像的城区建筑物特征,基于实际获取的机载X波段SAR图像,采用电磁模拟方法进行分析和研究.通过对城区的完整建筑和毁损建筑进行三维建模,采用射线跟踪的电磁计算方法和图像域积分的成像模拟方法得到不同受灾程度的建筑物SAR模拟图像.与真实SAR图像对比分析,提出的算法能够分析建筑物结构变化对SAR图像的影响,模拟主要的强散射点,能有效辅助SAR图像进行城区特征分析. 相似文献
8.
朱庆 《武汉大学学报(信息科学版)》1998,(2)
针对当前计算机图形技术的发展和GIS多专业应用需求的特点,本文以吉奥之星（Geostar）地理信息系统平台为例,研究了在当前二维系统中如何考虑三维或者2．5维表面表示与分析的问题。提出了集成数字高程模型（DEM）、数字正射影像、常规的矢量数据和各种属性信息在一起,建立一体化的三维数据输入、操作与可视化机制,并在此基础上提出了二维与三维混合表示的空间查询与分析模型。该模型扩展了可视化概念,将可视化技术贯穿于整个GIS运行过程。 相似文献
9.
Sameer Saran Kapil Oberai Parag Wate Amol Konde Arnab Dutta Kavisha Kumar A. Senthil Kumar 《Journal of the Indian Society of Remote Sensing》2018,46(6):957-972
Virtual 3D city models are increasingly being used to model the realms of the real world for utilization in a number of applications related to environmental simulations including, urban planning, mapping the energy characteristics of buildings, noise mapping, flood modelling, etc. Apart from geometric and appearance/textural information, these applications have a requirement for complex urban semantics. Currently, a number of 3D standards are available in CAD, BIM and GIS related domains for the storage, visualization and transfer of 3D geospatial datasets. Initially, the 3D data models (such as COLLADA, VRML, X3D, etc.) were purely graphical/geometrical in nature and mainly used for visualization purposes. With the inclusion of thematic modules in OGC CityGML, the integration of geometry and semantics in a single data model paved the way for better sharing of virtual 3D city models. In spite of the availability of a wide range of 3D data standards, there are certain differences with respect to geometry, topology, semantics, LODs, etc., which complicates the integration of 3D geodata from heterogeneous sources. This paper serves to highlights the need for the innovative solutions with respect to the urban environmental related simulations primarily based on the use of virtual 3D city models. Four use cases are studied in this context namely, (1) urban solar potential estimation using CityGML models, (2) simulation of traffic noise level mapped on building walls from the urban road segments, (3) CityGML based 3D data models interoperability, and (4) 3D indoor logistics and subsurface utilities. However, for modelling majority of use cases, CityGML does not provide explicit thematic representations but provides support for extending the CityGML schema using Application Domain Extensions. In a nutshell, the study explores the semantic modelling capabilities of the CityGML for the transformation of native 3D virtual city models to one satisfying capabilities like semantic information and support towards interoperability. 相似文献
10.
介绍了航空激光扫描(Airborne laser scanning)或者Lidar遥感信息获取系统的基本原理、系统的组成、数据获取的方法及其步骤;对近数十年来应用激光扫描遥感信息获取地形表面模型方面取得的主要成果、应用现状做了简要回顾和评述;结合GIS和影像融合方法对Lidar遥感技术未来发展趋势进行了展望。 相似文献
11.
从激光扫描数据中进行建筑物特征提取研究 总被引：42，自引：4，他引：42
提出了一套基于建筑物几何特征的信息挖掘方案，并具体介绍了研究中采用的一些原理、方法与实用算法，从而可以直接从激光扫描数据中提取建筑物的平面外轮廓信息。利用本方案对车载激光扫描系统获取的城市建筑物试验数据进行了具体的处理，并给出了三维建模和可视化表达结果。 相似文献
12.
3D GIS技术研究发展综述 总被引：17，自引：1，他引：16
回顾了3DGIS的发展进程,从三维空间数据获取,三维数据模型,三维空间数据管理和分析以及三维可视化技术4个方面综述了3DGIS技术的发展。探讨了目前研究3DGIS的4个热点问题:①数据源集成快速获取数据的方法;②不同数据模型的集成;③支持空间分析的面向对象的数据模型;④城市三维模型。 相似文献
13.
《International Journal of Digital Earth》2013,6(1):53-67
Adaptive rendering of large urban building models has become an important research issue in three-dimensional (3D) geographic information system (GIS) applications. This study explores a way for rendering web-based 3D urban building models. A client–server hybrid rendering approach is presented for large 3D city models, stored on a remote server through a network. The approach combines an efficient multi-hierarchical building representation with a novel image-based method, 3D image impostor generated on demand by a remote server. This approach allows transferring complex scenes progressively while keeping high visualization quality. We also evaluated the rendering and data transferring performance of the proposed approach. 相似文献
14.
In order to understand the 3D landscape with many high buildings in a city, the 2D GIS has to be extended to 3D GIS. The further
development of CyberCity has to include various applications of 3D scenes from the outdoor scenes to the indoor ones. In thispaper,
some key techniques, such as data management method and dynamicalvisualization method for the outdoor and the indoor scenes,
are discussed. The indoor scene is compared with the outdoor one. The idea of integratedrepresentation of the outdoor and
the indoor scenes in CyberCity GIS is discussed.
Funded by the open research fund program of LIESMARS (No. 010302). 相似文献
15.
Buildings, as impervious surfaces, are an important component of total impervious surface areas that drive urban stormwater response to intense rainfall events. Most stormwater models that use percent impervious area (PIA) are spatially lumped models and do not require precise locations of building roofs, as in other applications of building maps, but do require accurate estimates of total impervious areas within the geographic units of observation (e.g. city blocks or sub-watershed units). Two-dimensional mapping of buildings from aerial imagery requires laborious efforts from image analysts or elaborate image analysis techniques using high spatial resolution imagery. Moreover, large uncertainties exist where tall, dense vegetation obscures the structures. Analyzing LiDAR point-cloud data, however, can distinguish buildings from vegetation canopy and facilitate the mapping of buildings. This paper presents a new building extraction approach that is based on and optimized for estimating building impervious areas (BIA) for hydrologic purposes and can be used with standard GIS software to identify building roofs under tall, thick canopy. Accuracy assessment methods are presented that can optimize model performance for modeling BIA within the geographic units of observation for hydrologic applications. The Building Extraction from LiDAR Last Returns (BELLR) model, a 2.5D rule-based GIS model, uses a non-spatial, local vertical difference filter (VDF) on LiDAR point-cloud data to automatically identify and map building footprints. The model includes an absolute difference in elevation (AdE) parameter in the VDF that compares the difference between mean and modal elevations of last-returns in each cell.
The BELLR model is calibrated for an extensive inner-city, highly urbanized small watershed in Columbia, South Carolina, USA that is covered by tall, thick vegetation canopy that obscures many buildings. The calibration of BELLR used a set of building locations compiled by photo-analysts, and validation used independent building reference data. The model is applied to two residential neighborhoods, one of which is a residential area within the primary watershed and the other is a younger suburban neighborhood with a less-well developed tree canopy used as a validation site. Performance results indicate that the BELLR model is highly sensitive to concavity in the lasboundary tool of LAStools® and those settings are highly site specific. The model is also sensitive to cell size and the AdE threshold values. However, properly calibrated the BIA for the two residential sites could be estimated within 1% error for optimized experiments.
To examine results in a hydrologic application, the BELLR estimated BIAs were tested using two different types of hydrologic models to compare BELLR results with results using the National Land Cover Database (NLCD) 2011 Percent Developed Imperviousness data. The BELLR BIA values provide more accurate results than the use of the 2011 NLCD PIA data in both models. The VDF developed in this study to map buildings could be applied to LiDAR point-cloud filtering algorithms for feature extraction in machine learning or mapping other planar surfaces in more broad-based land-cover classifications. 相似文献
16.
From 2D to 3D GIS for CyberCity 总被引：3，自引：2，他引：1
LIDeren ZHUQing LIUQiang XUPeng 《地球空间信息科学学报》2004,7(1):1-5
In order to understand the 3D landscape with many high buildings in a city, the 2D GIS has to be extended to 3D GIS. The further development of CyberCity has to include various applications of 3D scenes from the outdoor scenes to the indoor ones. In thispaper, some key techniques, such as data management method and dynamicalvisualization method for the outdoor and the indoor scenes, are discussed. The indoor scene is compared with the outdoor one. The idea of integratedrepresentation of the outdoor and the indoor scenes in CyberCity GIS is discussed. 相似文献
17.
随着三维激光点云数据获取能力的提升,基于三维激光点云进行建筑物模型重建与立面测绘成为工程应用中常用的方法。三维激光点云数据能够体现建筑物丰富和直观的细节信息,然而海量数据处理给建筑物模型构建带来了极大挑战。本文通过对建筑物的三维激光点云数据进行横切得到建筑物轮廓点,并采用基于遗传算法的TSP算法对轮廓点进行处理以获取建筑物各立面的方程系数,最终实现建筑物模型的构建和获取详细的建筑物立面数据。试验结果表明,此方法可以较好地实现LOD1级建筑物模型的构建,进而为更高（LOD3）级别的建筑物模型构建提供依据。 相似文献
18.
19.
Cláudio Carneiro Eugenio Morello Thomas Voegtle François Golay 《Transactions in GIS》2010,14(4):497-531
The aim of this article is to present a method to calculate the morphological properties of the built environment using LiDAR (light detection and ranging) data, geographic information systems (GIS) data and three‐dimensional (3D) models of cities as a source of information. A hybrid approach that takes into account different types of inputs and consequently evaluates the accuracy of each type of used data is presented. This work is intended to give a first response to the lack of a comprehensive and accurate procedure that uses LiDAR data in order to automatically derive precise morphological properties, such as volumes and surfaces (façades and roofs) of buildings. The method was tested on two case‐study areas in the Geneva region with different characteristics, one in the old town along the Rhone River and the other on the CERN campus. A statistical analysis that compares the results of the computation with the 3D model of the built environment was used to validate the results, complemented by significance statistical tests. Outcomes showed that the proposed method to derive morphological properties can reach high levels of accuracy, thus enhancing the potential uses of LiDAR data for numerous applications, typically for the assessment of the urban environmental quality (UEQ) at the city and district scale, such as the estimation of the potential deployment of renewable energies in the built environment and the determination and monitoring of several urban indicators. 相似文献
20.